arm64: dts: ls208xa: add power monitor chip node
Subsystems (2)
PATCH 1/1 arm64: dts: ls208xa: add power monitor chip node
Ina220 chip was used on ls208xardb platform to monitor power comsumption. So add ina220 chip node in dts to enable power consumption monitor feature.
Signed-off-by Tang Yuantian <[email protected]>
--- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +11 -0
@@ -95,6 +95,17 @@ }; }; + i2c at 2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + ina220 at 40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + i2c at 3 { #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
1.7.1
PATCH 1/1 arm64: dts: ls208xa: add power monitor chip node
Quoted 14 lines · Yuantian Tang
Ina220 chip was used on ls208xardb platform to monitor power comsumption. So add ina220 chip node in dts to enable power consumption monitor feature.
Signed-off-by Tang Yuantian <[email protected]>--- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +0
-0
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi line 101
Quoted 7 lines
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +4
-0@@ -95,6 +95,17 @@ }; }; + i2c at 2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>;
We generally have a newline between property list and child node. I fixed it up and applied the patch.
Shawn
Quoted 18 lines
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +7
-0+ ina220 at 40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + i2c at 3 { #address-cells = <1>; #size-cells = <0>;Signature · 7 lines
1.7.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel