Skip to contentSkip to conversation

ARM: dts: imx7s: Avoid using label in unit address and reg

PATCH New Fabio Estevam 2 participants 2 messages Dec 26, 2017 – Dec 27, 2017

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx7s: Avoid using label in unit address and reg

From: Fabio Estevam <[email protected]>

As recommended by Rob Herring [1] labels should not be used in unit address and reg, so use its real value directly instead.

[1] https://www.spinics.net/lists/devicetree/msg206567.html

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx7s.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx7s.dtsi +2 -2
index 2ceb37d..9aa2bb9 100644
@@ -600,9 +600,9 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					pgc_pcie_phy: pgc-power-domain at IMX7_POWER_DOMAIN_PCIE_PHY {
+					pgc_pcie_phy: pgc-power-domain at 1 {
 						#power-domain-cells = <0>;
-						reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
+						reg = <1>;
 						power-supply = <&reg_1p0d>;
 					};
 				};
Signature · 1 line
2.7.4