ARM: dts: ls1021a: fix incorrect clock references

dtc warns about two 'clocks' properties that have an extraneous '1' at the end:

arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Property 'clocks', cell 1 is not a phandle reference in /soc/i2c at 2180000/mux at 77/i2c at 4/sgtl5000 at 2a arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller at 1400000 or bad phandle (referred from /soc/i2c at 2180000/mux at 77/i2c at 4/sgtl5000 at 2a:clocks[1]) Property 'clocks', cell 1 is not a phandle reference in /soc/i2c at 2190000/sgtl5000 at a
arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller at 1400000 or bad phandle (referred from /soc/i2c at 2190000/sgtl5000 at a:clocks[1])

The clocks that get referenced here are fixed-rate, so they do not take any argument, and dtc interprets the next cell as a phandle, which is invalid.

---
 arch/arm/boot/dts/ls1021a-qds.dts | 2 +-
 arch/arm/boot/dts/ls1021a-twr.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index 940875316d0f..67b4de0e3439 100644
@@ -215,7 +215,7 @@
 				reg = <0x2a>;
 				VDDA-supply = <&reg_3p3v>;
 				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk 1>;
+				clocks = <&sys_mclk>;
 			};
 		};
 	};

index a8b148ad1dd2..44715c8ef756 100644
@@ -187,7 +187,7 @@
 		reg = <0x0a>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk 1>;
+		clocks = <&sys_mclk>;
 	};
 };
 

2.9.0

Hi Arnd,

Thanks for the patch. But I have queued up a couple of patches from Fabio [1] for that.

Shawn

[1] https://www.spinics.net/lists/arm-kernel/msg624303.html