Skip to contentSkip to conversation

Add io{read|write}64 to io-64-atomic headers

PATCH Superseded Logan Gunthorpe 2 participants 11 messages Jan 3, 2018 – Jan 4, 2018

Subsystems (11)

v9 of 25 Superseded Latest is v25 →

lore
Share & tools
lore

Logan Gunthorpe

author maintainer
#0 lore raw

v9 cover Add io{read|write}64 to io-64-atomic headers

This is just a resend. I haven't recieved any additional feedback in a number of version and the patchset has been around for a couple kernel cycles. It would be nice if someone would take a look at getting this merged.

This cleanup was originally requested by Greg after he reviewed my Switchtec NTB code.

Thanks,

Logan

--

This is v9 of my cleanup series to push a number of instances of people defining their own io{read|write}64 functions into common headers seing they don't exist in non-64bit systems. This series adds inline functions to the io-64-nonatomic headers and then cleans up the drivers that defined their own.

Changes since v8:
- Rebased onto v4.15-rc2, as a result rewrote patch 7 seeing someone did some similar cleanup in that area.
- Added a patch to clean up the Switchtec NTB driver which landed in v4.15-rc1

Changes since v7:
- Fix minor nits from Andy Shevchenko
- Rebased onto v4.14-rc1

Changes since v6:
** none **

Changes since v5:
- Added a fix to the tilcdc driver to ensure it doesn't use the non-atomic operation. (This includes adding io{read|write}64[be]_is_nonatomic defines).

Changes since v4:
- Add functions so the powerpc implementation of iomap.c compiles. (As noticed by Horia)

Changes since v3:

- I noticed powerpc didn't use the appropriate functions seeing readq/writeq were not defined when iomap.h was included. Thus I've included a patch to adjust this
- Fixed some mistakes with a couple of the defines in io-64-nonatomic* headers
- Fixed a typo noticed by Horia.

(earlier versions were drastically different)

Logan Gunthorpe (8):
drm/tilcdc: ensure nonatomic iowrite64 is not used
powerpc: io.h: move iomap.h include so that it can use readq/writeq
defs
powerpc: iomap.c: introduce io{read|write}64_{lo_hi|hi_lo}
iomap: introduce io{read|write}64_{lo_hi|hi_lo}
io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64
ntb: ntb_hw_switchtec: Cleanup 64bit IO defines to use the common
header

 arch/powerpc/include/asm/io.h          |   6 +-
 arch/powerpc/kernel/iomap.c            |  40 ++++++++++
 drivers/crypto/caam/regs.h             |  26 +------
 drivers/gpu/drm/tilcdc/tilcdc_regs.h   |   2 +-
 drivers/ntb/hw/intel/ntb_hw_intel.c    |  30 +-------
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c |  30 +-------
 include/asm-generic/iomap.h            |  26 +++++--
 include/linux/io-64-nonatomic-hi-lo.h  |  64 ++++++++++++++++
 include/linux/io-64-nonatomic-lo-hi.h  |  64 ++++++++++++++++
 lib/iomap.c                            | 132 +++++++++++++++++++++++++++++++++
 10 files changed, 328 insertions(+), 92 deletions(-)

--
2.11.0

author maintainer
#1 lore raw

PATCH v9 1/8 drm/tilcdc: ensure nonatomic iowrite64 is not used

Add a check to ensure iowrite64 is only used if it is atomic.

It was decided in [1] that the tilcdc driver should not be using an atomic operation (so it was left out of this patchset). However, it turns out that through the drm code, a nonatomic header is actually included:

include/linux/io-64-nonatomic-lo-hi.h
is included from include/drm/drm_os_linux.h:9:0,

            from include/drm/drmP.h:74,
            from include/drm/drm_modeset_helper.h:26,
            from include/drm/drm_atomic_helper.h:33,
            from drivers/gpu/drm/tilcdc/tilcdc_crtc.c:19:

And thus, without this change, this patchset would inadvertantly change the behaviour of the tilcdc driver.

[1] lkml.kernel.org/r/CAK8P3a2HhO_zCnsTzq7hmWSz5La5Thu19FWZpun16iMnyyNreQ@mail.gmail.com

Cc Jyri Sarha <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Tomi Valkeinen <[email protected]>
Cc David Airlie <[email protected]>
---
 drivers/gpu/drm/tilcdc/tilcdc_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/tilcdc/tilcdc_regs.h +1 -1
index 9d528c0a67a4..5048ebb86835 100644
@@ -133,7 +133,7 @@ static inline void tilcdc_write64(struct drm_device *dev, u32 reg, u64 data)
 	struct tilcdc_drm_private *priv = dev->dev_private;
 	volatile void __iomem *addr = priv->mmio + reg;
 
-#ifdef iowrite64
+#if defined(iowrite64) && !defined(iowrite64_is_nonatomic)
 	iowrite64(data, addr);
 #else
 	__iowmb();
Signature · 1 line
2.11.0
author maintainer
#2 lore raw

PATCH v9 2/8 powerpc: io.h: move iomap.h include so that it can use readq/writeq defs

In reply to Logan Gunthorpe

Subsequent patches in this series makes use of the readq and writeq defines in iomap.h. However, as is, they get missed on the powerpc platform seeing the include comes before the define. This patch moves the include down to fix this.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Nicholas Piggin <[email protected]>
Cc Suresh Warrier <[email protected]>
Cc "Oliver O'Halloran" <[email protected]>
---
 arch/powerpc/include/asm/io.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/io.h +2 -2
index 422f99cf9924..af074923d598 100644
@@ -33,8 +33,6 @@ extern struct pci_dev *isa_bridge_pcidev;
 #include <asm/mmu.h>
 #include <asm/ppc_asm.h>
 
-#include <asm-generic/iomap.h>
-
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>
 #endif
@@ -663,6 +661,8 @@ static inline void name at					\
 #define writel_relaxed(v, addr)	writel(v, addr)
 #define writeq_relaxed(v, addr)	writeq(v, addr)
 
+#include <asm-generic/iomap.h>
+
 #ifdef CONFIG_PPC32
 #define mmiowb()
 #else

--
2.11.0

author maintainer
#3 lore raw

PATCH v9 3/8 powerpc: iomap.c: introduce io{read|write}64_{lo_hi|hi_lo}

In reply to Logan Gunthorpe

These functions will be introduced into the generic iomap.c so they can deal with PIO accesses in hi-lo/lo-hi variants. Thus, the powerpc version of iomap.c will need to provide the same functions even though, in this arch, they are identical to the regular io{read|write}64 functions.

---
 arch/powerpc/kernel/iomap.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/powerpc/kernel/iomap.c +40 -0
index aab456ed2a00..5ac84efc6ede 100644
@@ -45,12 +45,32 @@ u64 ioread64(void __iomem *addr)
 {
 	return readq(addr);
 }
+u64 ioread64_lo_hi(void __iomem *addr)
+{
+	return readq(addr);
+}
+u64 ioread64_hi_lo(void __iomem *addr)
+{
+	return readq(addr);
+}
 u64 ioread64be(void __iomem *addr)
 {
 	return readq_be(addr);
 }
+u64 ioread64be_lo_hi(void __iomem *addr)
+{
+	return readq_be(addr);
+}
+u64 ioread64be_hi_lo(void __iomem *addr)
+{
+	return readq_be(addr);
+}
 EXPORT_SYMBOL(ioread64);
+EXPORT_SYMBOL(ioread64_lo_hi);
+EXPORT_SYMBOL(ioread64_hi_lo);
 EXPORT_SYMBOL(ioread64be);
+EXPORT_SYMBOL(ioread64be_lo_hi);
+EXPORT_SYMBOL(ioread64be_hi_lo);
 #endif /* __powerpc64__ */
 
 void iowrite8(u8 val, void __iomem *addr)
@@ -83,12 +103,32 @@ void iowrite64(u64 val, void __iomem *addr)
 {
 	writeq(val, addr);
 }
+void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+	writeq(val, addr);
+}
+void iowrite64_hi_lo(u64 val, void __iomem *addr)
+{
+	writeq(val, addr);
+}
 void iowrite64be(u64 val, void __iomem *addr)
 {
 	writeq_be(val, addr);
 }
+void iowrite64be_lo_hi(u64 val, void __iomem *addr)
+{
+	writeq_be(val, addr);
+}
+void iowrite64be_hi_lo(u64 val, void __iomem *addr)
+{
+	writeq_be(val, addr);
+}
 EXPORT_SYMBOL(iowrite64);
+EXPORT_SYMBOL(iowrite64_lo_hi);
+EXPORT_SYMBOL(iowrite64_hi_lo);
 EXPORT_SYMBOL(iowrite64be);
+EXPORT_SYMBOL(iowrite64be_lo_hi);
+EXPORT_SYMBOL(iowrite64be_hi_lo);
 #endif /* __powerpc64__ */
 
 /*
Signature · 1 line
2.11.0
author maintainer
#4 lore raw

PATCH v9 4/8 iomap: introduce io{read|write}64_{lo_hi|hi_lo}

In reply to Logan Gunthorpe

In order to provide non-atomic functions for io{read|write}64 that will use readq and writeq when appropriate. We define a number of variants of these functions in the generic iomap that will do non-atomic operations on pio but atomic operations on mmio.

These functions are only defined if readq and writeq are defined. If they are not, then the wrappers that always use non-atomic operations from include/linux/io-64-nonatomic*.h will be used.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Suresh Warrier <[email protected]>
Cc Nicholas Piggin <[email protected]>
---
 arch/powerpc/include/asm/io.h |   2 +
 include/asm-generic/iomap.h   |  26 +++++++--
 lib/iomap.c                   | 132 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 154 insertions(+), 6 deletions(-)
arch/powerpc/include/asm/io.h +2 -0
index af074923d598..4cc420cfaa78 100644
@@ -788,8 +788,10 @@ extern void __iounmap_at(void *ea, unsigned long size);
 
 #define mmio_read16be(addr)		readw_be(addr)
 #define mmio_read32be(addr)		readl_be(addr)
+#define mmio_read64be(addr)		readq_be(addr)
 #define mmio_write16be(val, addr)	writew_be(val, addr)
 #define mmio_write32be(val, addr)	writel_be(val, addr)
+#define mmio_write64be(val, addr)	writeq_be(val, addr)
 #define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
 #define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
 #define mmio_insl(addr, dst, count)	readsl(addr, dst, count)
include/asm-generic/iomap.h +20 -6
index 5b63b94ef6b5..5a4af0199b32 100644
@@ -31,9 +31,16 @@ extern unsigned int ioread16(void __iomem *);
 extern unsigned int ioread16be(void __iomem *);
 extern unsigned int ioread32(void __iomem *);
 extern unsigned int ioread32be(void __iomem *);
-#ifdef CONFIG_64BIT
-extern u64 ioread64(void __iomem *);
-extern u64 ioread64be(void __iomem *);
+
+#ifdef readq
+#define ioread64_lo_hi ioread64_lo_hi
+#define ioread64_hi_lo ioread64_hi_lo
+#define ioread64be_lo_hi ioread64be_lo_hi
+#define ioread64be_hi_lo ioread64be_hi_lo
+extern u64 ioread64_lo_hi(void __iomem *addr);
+extern u64 ioread64_hi_lo(void __iomem *addr);
+extern u64 ioread64be_lo_hi(void __iomem *addr);
+extern u64 ioread64be_hi_lo(void __iomem *addr);
 #endif
 
 extern void iowrite8(u8, void __iomem *);
@@ -41,9 +48,16 @@ extern void iowrite16(u16, void __iomem *);
 extern void iowrite16be(u16, void __iomem *);
 extern void iowrite32(u32, void __iomem *);
 extern void iowrite32be(u32, void __iomem *);
-#ifdef CONFIG_64BIT
-extern void iowrite64(u64, void __iomem *);
-extern void iowrite64be(u64, void __iomem *);
+
+#ifdef writeq
+#define iowrite64_lo_hi iowrite64_lo_hi
+#define iowrite64_hi_lo iowrite64_hi_lo
+#define iowrite64be_lo_hi iowrite64be_lo_hi
+#define iowrite64be_hi_lo iowrite64be_hi_lo
+extern void iowrite64_lo_hi(u64 val, void __iomem *addr);
+extern void iowrite64_hi_lo(u64 val, void __iomem *addr);
+extern void iowrite64be_lo_hi(u64 val, void __iomem *addr);
+extern void iowrite64be_hi_lo(u64 val, void __iomem *addr);
 #endif
 
 /*
lib/iomap.c +132 -0

156 lines not on this page · raw message

Signature · 1 line
2.11.0
author maintainer
#5 lore raw

PATCH v9 5/8 io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros

In reply to Logan Gunthorpe

This patch adds generic io{read|write}64[be]{_lo_hi|_hi_lo} macros if they are not already defined by the architecture. (As they are provided by the generic iomap library).

The patch also points io{read|write}64[be] to the variant specified by the header name.

This is because new drivers are encouraged to use ioreadXX, et al instead of readX[1], et al -- and mixing ioreadXX with readq is pretty ugly.

[1] LDD3: section 9.4.2

Cc Christoph Hellwig <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Alan Cox <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
---
 include/linux/io-64-nonatomic-hi-lo.h | 64 +++++++++++++++++++++++++++++++++++
 include/linux/io-64-nonatomic-lo-hi.h | 64 +++++++++++++++++++++++++++++++++++
 2 files changed, 128 insertions(+)
include/linux/io-64-nonatomic-hi-lo.h +64 -0
index 862d786a904f..ae21b72cce85 100644
@@ -55,4 +55,68 @@ static inline void hi_lo_writeq_relaxed(__u64 val, volatile void __iomem *addr)
 #define writeq_relaxed hi_lo_writeq_relaxed
 #endif
 
+#ifndef ioread64_hi_lo
+#define ioread64_hi_lo ioread64_hi_lo
+static inline u64 ioread64_hi_lo(void __iomem *addr)
+{
+	u32 low, high;
+
+	high = ioread32(addr + sizeof(u32));
+	low = ioread32(addr);
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64_hi_lo
+#define iowrite64_hi_lo iowrite64_hi_lo
+static inline void iowrite64_hi_lo(u64 val, void __iomem *addr)
+{
+	iowrite32(val >> 32, addr + sizeof(u32));
+	iowrite32(val, addr);
+}
+#endif
+
+#ifndef ioread64be_hi_lo
+#define ioread64be_hi_lo ioread64be_hi_lo
+static inline u64 ioread64be_hi_lo(void __iomem *addr)
+{
+	u32 low, high;
+
+	high = ioread32be(addr);
+	low = ioread32be(addr + sizeof(u32));
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64be_hi_lo
+#define iowrite64be_hi_lo iowrite64be_hi_lo
+static inline void iowrite64be_hi_lo(u64 val, void __iomem *addr)
+{
+	iowrite32be(val >> 32, addr);
+	iowrite32be(val, addr + sizeof(u32));
+}
+#endif
+
+#ifndef ioread64
+#define ioread64_is_nonatomic
+#define ioread64 ioread64_hi_lo
+#endif
+
+#ifndef iowrite64
+#define iowrite64_is_nonatomic
+#define iowrite64 iowrite64_hi_lo
+#endif
+
+#ifndef ioread64be
+#define ioread64be_is_nonatomic
+#define ioread64be ioread64be_hi_lo
+#endif
+
+#ifndef iowrite64be
+#define iowrite64be_is_nonatomic
+#define iowrite64be iowrite64be_hi_lo
+#endif
+
 #endif	/* _LINUX_IO_64_NONATOMIC_HI_LO_H_ */
include/linux/io-64-nonatomic-lo-hi.h +64 -0

68 lines not on this page · raw message

Signature · 1 line
2.11.0
author maintainer
#6 lore raw

PATCH v9 6/8 ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks

In reply to Logan Gunthorpe

Now that ioread64 and iowrite64 are available in io-64-nonatomic, we can remove the hack at the top of ntb_hw_intel.c and replace it with an include.

# Please enter the commit message for your changes. Lines starting

# with '#' will be ignored, and an empty message aborts the commit.
#
# Date:      Mon Jun 19 12:18:31 2017 -0600
#
# interactive rebase in progress; onto ae64f9bd1d36
# Last commands done (6 commands done):
#    pick cf3e4dab2173 io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
#    r 79b4c4b8490c ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
# Next commands to do (2 remaining commands):
#    r 19b6c1f3b15d crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64
#    r f3c8723446ef ntb_hw_switchtec: Cleanup 64bit IO defines to use the common header
# You are currently editing a commit while rebasing branch 'io64_v9' on 'ae64f9bd1d36'.
#
# Changes to be committed:
#	modified:   drivers/ntb/hw/intel/ntb_hw_intel.c
#
---
 drivers/ntb/hw/intel/ntb_hw_intel.c | 30 +-----------------------------
 1 file changed, 1 insertion(+), 29 deletions(-)
drivers/ntb/hw/intel/ntb_hw_intel.c +1 -29
index 4de074a86073..119cfc45617e 100644
@@ -59,6 +59,7 @@
 #include <linux/random.h>
 #include <linux/slab.h>
 #include <linux/ntb.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 #include "ntb_hw_intel.h"
 
@@ -155,35 +156,6 @@ MODULE_PARM_DESC(xeon_b2b_dsd_bar5_addr32,
 static inline enum ntb_topo xeon_ppd_topo(struct intel_ntb_dev *ndev, u8 ppd);
 static int xeon_init_isr(struct intel_ntb_dev *ndev);
 
-#ifndef ioread64
-#ifdef readq
-#define ioread64 readq
-#else
-#define ioread64 _ioread64
-static inline u64 _ioread64(void __iomem *mmio)
-{
-	u64 low, high;
-
-	low = ioread32(mmio);
-	high = ioread32(mmio + sizeof(u32));
-	return low | (high << 32);
-}
-#endif
-#endif
-
-#ifndef iowrite64
-#ifdef writeq
-#define iowrite64 writeq
-#else
-#define iowrite64 _iowrite64
-static inline void _iowrite64(u64 val, void __iomem *mmio)
-{
-	iowrite32(val, mmio);
-	iowrite32(val >> 32, mmio + sizeof(u32));
-}
-#endif
-#endif
-
 static inline int pdev_is_atom(struct pci_dev *pdev)
 {
 	switch (pdev->device) {
Signature · 1 line
2.11.0
author maintainer
#7 lore raw

PATCH v9 7/8 crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64

In reply to Logan Gunthorpe

Clean up the extra ifdefs which defined the wr_reg64 and rd_reg64 functions in non-64bit cases in favour of the new common io-64-nonatomic-lo-hi header.

Cc Andy Shevchenko <[email protected]>
Cc Horia Geantă <[email protected]>
Cc Dan Douglass <[email protected]>
Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
---
 drivers/crypto/caam/regs.h | 26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)
drivers/crypto/caam/regs.h +1 -25
index fee363865d88..ec6528e5ce9d 100644
@@ -10,7 +10,7 @@
 
 #include <linux/types.h>
 #include <linux/bitops.h>
-#include <linux/io.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
 
 /*
  * Architecture-specific register access methods
@@ -136,7 +136,6 @@ static inline void clrsetbits_32(void __iomem *reg, u32 clear, u32 set)
  *    base + 0x0000 : least-significant 32 bits
  *    base + 0x0004 : most-significant 32 bits
  */
-#ifdef CONFIG_64BIT
 static inline void wr_reg64(void __iomem *reg, u64 data)
 {
 	if (caam_little_end)
@@ -153,29 +152,6 @@ static inline u64 rd_reg64(void __iomem *reg)
 		return ioread64be(reg);
 }
 
-#else /* CONFIG_64BIT */
-static inline void wr_reg64(void __iomem *reg, u64 data)
-{
-	if (!caam_imx && caam_little_end) {
-		wr_reg32((u32 __iomem *)(reg) + 1, data >> 32);
-		wr_reg32((u32 __iomem *)(reg), data);
-	} else {
-		wr_reg32((u32 __iomem *)(reg), data >> 32);
-		wr_reg32((u32 __iomem *)(reg) + 1, data);
-	}
-}
-
-static inline u64 rd_reg64(void __iomem *reg)
-{
-	if (!caam_imx && caam_little_end)
-		return ((u64)rd_reg32((u32 __iomem *)(reg) + 1) << 32 |
-			(u64)rd_reg32((u32 __iomem *)(reg)));
-
-	return ((u64)rd_reg32((u32 __iomem *)(reg)) << 32 |
-		(u64)rd_reg32((u32 __iomem *)(reg) + 1));
-}
-#endif /* CONFIG_64BIT  */
-
 static inline u64 cpu_to_caam_dma64(dma_addr_t value)
 {
 	if (caam_imx)
Signature · 1 line
2.11.0
maintainer
#8 lore raw

Re: [PATCH v9 7/8] crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64

Quoted 19 lines · Logan Gunthorpe

Clean up the extra ifdefs which defined the wr_reg64 and rd_reg64 functions in non-64bit cases in favour of the new common io-64-nonatomic-lo-hi header.

Cc Andy Shevchenko <[email protected]>
Cc Horia Geantă <[email protected]>
Cc Dan Douglass <[email protected]>
Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
---
 drivers/crypto/caam/regs.h | 26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)
drivers/crypto/caam/regs.h +0 -0
index fee363865d88..ec6528e5ce9d 100644

drivers/crypto/caam/regs.h line 13

Quoted 5 lines
drivers/crypto/caam/regs.h +1 -1
@@ -10,7 +10,7 @@
 
 #include <linux/types.h>
 #include <linux/bitops.h>
-#include <linux/io.h>
+#include <linux/io-64-nonatomic-hi-lo.h>

Typo: lo-hi should be used instead (see previous patch versions).

Please add in the commit message the explanation (which was there in v8 but removed in v9):
To be consistent with CAAM engine HW spec: in case of 64-bit registers, irrespective of device endianness, the lower address should be read from / written to first, followed by the upper address. Indeed the I/O accessors in CAAM driver currently don't follow the spec, however this is a good opportunity to fix the code.

drivers/crypto/caam/regs.h static inline void clrsetbits_32(void __iomem *reg, u32 clear, u32 set) · line 141

Quoted 11 lines
drivers/crypto/caam/regs.h +0 -1
 /*
  * Architecture-specific register access methods
@@ -136,7 +136,6 @@ static inline void clrsetbits_32(void __iomem *reg, u32 clear, u32 set)
  *    base + 0x0000 : least-significant 32 bits
  *    base + 0x0004 : most-significant 32 bits
  */
-#ifdef CONFIG_64BIT
 static inline void wr_reg64(void __iomem *reg, u64 data)
 {
 	if (caam_little_end)

Since the 2 cases (32/64-bit) are merged, caam_imx should be accounted for the logic to stay the same.

This means for e.g. for wr_reg64 (similar for rd_reg64):
static inline void wr_reg64(void __iomem *reg, u64 data)

{
	if (!caam_imx && caam_little_end)
		iowrite64(data, reg);
	else
		iowrite64be(data, reg);
}

Thanks,
Horia

Quoted 31 lines
drivers/crypto/caam/regs.h +0 -23
@@ -153,29 +152,6 @@ static inline u64 rd_reg64(void __iomem *reg)
 		return ioread64be(reg);
 }
 
-#else /* CONFIG_64BIT */
-static inline void wr_reg64(void __iomem *reg, u64 data)
-{
-	if (!caam_imx && caam_little_end) {
-		wr_reg32((u32 __iomem *)(reg) + 1, data >> 32);
-		wr_reg32((u32 __iomem *)(reg), data);
-	} else {
-		wr_reg32((u32 __iomem *)(reg), data >> 32);
-		wr_reg32((u32 __iomem *)(reg) + 1, data);
-	}
-}
-
-static inline u64 rd_reg64(void __iomem *reg)
-{
-	if (!caam_imx && caam_little_end)
-		return ((u64)rd_reg32((u32 __iomem *)(reg) + 1) << 32 |
-			(u64)rd_reg32((u32 __iomem *)(reg)));
-
-	return ((u64)rd_reg32((u32 __iomem *)(reg)) << 32 |
-		(u64)rd_reg32((u32 __iomem *)(reg) + 1));
-}
-#endif /* CONFIG_64BIT  */
-
 static inline u64 cpu_to_caam_dma64(dma_addr_t value)
 {
 	if (caam_imx)
author maintainer
#9 lore raw

Re: [PATCH v9 7/8] crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64

Quoted 10 lines · Horia Geantă
Quoted 1 line

+#include <linux/io-64-nonatomic-hi-lo.h>

Typo: lo-hi should be used instead (see previous patch versions).

Please add in the commit message the explanation (which was there in v8 but removed in v9):
To be consistent with CAAM engine HW spec: in case of 64-bit registers, irrespective of device endianness, the lower address should be read from / written to first, followed by the upper address. Indeed the I/O accessors in CAAM driver currently don't follow the spec, however this is a good opportunity to fix the code.

Ok, well I just copied what the latest code did. I assumed that seeing it was cleaned up very recently that they would have done it correctly.

Quoted 13 lines

drivers/crypto/caam/regs.h static inline void clrsetbits_32(void __iomem *reg, u32 clear, u32 set) · line 141

Quoted 11 lines

/*
* Architecture-specific register access methods

drivers/crypto/caam/regs.h +0 -1
@@ -136,7 +136,6 @@ static inline void clrsetbits_32(void __iomem *reg, u32 clear, u32 set)
   *    base + 0x0000 : least-significant 32 bits
   *    base + 0x0004 : most-significant 32 bits
   */
-#ifdef CONFIG_64BIT
  static inline void wr_reg64(void __iomem *reg, u64 data)
  {
  	if (caam_little_end)

Since the 2 cases (32/64-bit) are merged, caam_imx should be accounted for the logic to stay the same.

Oops, my mistake. I'll fix this and the above and send a revised set.

Logan

author maintainer
#10 lore raw

PATCH v9 8/8 ntb: ntb_hw_switchtec: Cleanup 64bit IO defines to use the common header

In reply to Logan Gunthorpe

Clean up the ifdefs which conditionally defined the io{read|write}64 functions in favour of the new common io-64-nonatomic-lo-hi header.

---
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 30 +-----------------------------
 1 file changed, 1 insertion(+), 29 deletions(-)
drivers/ntb/hw/mscc/ntb_hw_switchtec.c +1 -29
index afe8ed6f3b23..53d3a34cddf3 100644
@@ -19,6 +19,7 @@
 #include <linux/kthread.h>
 #include <linux/interrupt.h>
 #include <linux/ntb.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 MODULE_DESCRIPTION("Microsemi Switchtec(tm) NTB Driver");
 MODULE_VERSION("0.1");
@@ -35,35 +36,6 @@ module_param(use_lut_mws, bool, 0644);
 MODULE_PARM_DESC(use_lut_mws,
 		 "Enable the use of the LUT based memory windows");
 
-#ifndef ioread64
-#ifdef readq
-#define ioread64 readq
-#else
-#define ioread64 _ioread64
-static inline u64 _ioread64(void __iomem *mmio)
-{
-	u64 low, high;
-
-	low = ioread32(mmio);
-	high = ioread32(mmio + sizeof(u32));
-	return low | (high << 32);
-}
-#endif
-#endif
-
-#ifndef iowrite64
-#ifdef writeq
-#define iowrite64 writeq
-#else
-#define iowrite64 _iowrite64
-static inline void _iowrite64(u64 val, void __iomem *mmio)
-{
-	iowrite32(val, mmio);
-	iowrite32(val >> 32, mmio + sizeof(u32));
-}
-#endif
-#endif
-
 #define SWITCHTEC_NTB_MAGIC 0x45CC0001
 #define MAX_MWS     128
 
Signature · 1 line
2.11.0