i915: pm: Be less agressive with clockfreq changes on Bay Trail
Subsystems (2)
cover i915: pm: Be less agressive with clockfreq changes on Bay Trail
Hi All,
So this patch, which I already submitted a while ago and back then it got one comment from Chris Wilson:
Quoted 7 lines
Basically you want a limit on the frequency of ... pcode access? As presented, you ultimately do not trust any write and the only solution is to disable all writes. No RPS whatsoever, run at max and hope rc6 works (maybe even decrease the rc6 threshold).
One of the ideas we floated was moving the pcode access to a worker and ratelimiting the updates.
Has finally seen some testing by users affected by the infamous "intel_idle.max_cstate=1 required to prevent crashes" bug:
https://bugzilla.kernel.org/show_bug.cgi?id=109051
And so far the reports are that it does help to make the users stable for 2/3 users and it not being effective for 1/3 users.
Now that we've some test results, I believe that it is worthwhile to get this simple patch mainlined, hence this re-submission.
Regards,
Hans
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/1 i915: pm: Be less agressive with clockfreq changes on Bay Trail
Bay Trail devices are known to hang when changing the frequency often, this is discussed in great length in:
https://bugzilla.kernel.org/show_bug.cgi?id=109051
Commit 6067a27d1f01 ("drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3") is an attempt to workaround this. Several users in bko109051 report that an earlier version of this patch, v1:
https://bugzilla.kernel.org/attachment.cgi?id=251471
Works better for them and they still see hangs with the merged v3.
Comparing the 2 versions shows that they are indeed not equivalent, v1 not only skips writing the GEN6_RP* registers from valleyview_set_rps, as v3 does. It also contained these modifications to i915_irq.c:
if (pm_iir & GEN6_PM_RP_DOWN_EI_EXPIRED) {
if (!vlv_c0_above(dev_priv,
&dev_priv->rps.down_ei, &now,
- dev_priv->rps.down_threshold))
+ VLV_RP_DOWN_EI_THRESHOLD))
events |= GEN6_PM_RP_DOWN_THRESHOLD;
dev_priv->rps.down_ei = now;
}
if (pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) {
if (vlv_c0_above(dev_priv,
&dev_priv->rps.up_ei, &now,
- dev_priv->rps.up_threshold))
+ VLV_RP_UP_EI_THRESHOLD))
events |= GEN6_PM_RP_UP_THRESHOLD;
dev_priv->rps.up_ei = now;
}Which use less aggressive up/down thresholds, which results in less GEN6_PM_RP_*_THRESHOLD events and thus in less calls to intel_set_rps() -> valleyview_set_rps() -> vlv_punit_write(PUNIT_REG_GPU_FREQ_REQ). With the last call being the likely cause of the hang.
This commit hardcodes the threshold_up and _down values for Bay Trail to less aggressive values, reducing the amount of clock frequency changes, thus avoiding the hangs some people are still seeing with the merged fix.
--- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_pm.c | 5 ++++- 2 files changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -1390,6 +1390,9 @@ enum i915_power_well_id {#define VLV_BIAS_CPU_125_SOC_875 (6 << 2)#define CHV_BIAS_CPU_50_SOC_50 (3 << 2) +#define VLV_RP_UP_EI_THRESHOLD 90 +#define VLV_RP_DOWN_EI_THRESHOLD 70 +/* vlv2 north clock has */ #define CCK_FUSE_REG 0x8#define CCK_FUSE_HPLL_FREQ_MASK 0x3
drivers/gpu/drm/i915/intel_pm.c +4 -1
@@ -6116,8 +6116,11 @@ static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)/* When byt can survive without system hang with dynamic * sw freq adjustments, this restriction can be lifted. */ -if (IS_VALLEYVIEW (dev_priv)) +if (IS_VALLEYVIEW (dev_priv)) { + threshold_up =VLV_RP_UP_EI_THRESHOLD ; + threshold_down =VLV_RP_DOWN_EI_THRESHOLD ; goto skip_hw_write; + }I915_WRITE (GEN6_RP_UP_EI ,GT_INTERVAL_FROM_US (dev_priv, ei_up));
Signature · 6 lines
2.14.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for i915: pm: Be less agressive with clockfreq changes on Bay Trail (rev2)
In reply to Hans de Goede== Series Details ==
== Series Details ==
Series: i915: pm: Be less agressive with clockfreq changes on Bay Trail (rev2)
URL : https://patchwork.freedesktop.org/series/33541/
State : success
== Summary ==
Series 33541v2 i915: pm: Be less agressive with clockfreq changes on Bay Trail
https://patchwork.freedesktop.org/api/1.0/series/33541/revisions/2/mbox/
Test debugfs_test:
Subgroup read_all_entries:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
dmesg-warn -> PASS (fi-kbl-r) fdo#104172 +1
Subgroup suspend-read-crc-pipe-b:
incomplete -> PASS (fi-bdw-5557u) fdo#104162fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#104172 https://bugs.freedesktop.org/show_bug.cgi?id=104172
fdo#104162 https://bugs.freedesktop.org/show_bug.cgi?id=104162
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:418s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:424s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:369s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:483s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:275s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:480s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:478s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:462s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:449s fi-elk-e7500 total:224 pass:168 dwarn:10 dfail:0 fail:0 skip:45 fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:264s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:514s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:389s fi-hsw-4770r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:400s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:412s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:454s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:410s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:465s fi-kbl-7560u total:288 pass:268 dwarn:1 dfail:0 fail:0 skip:19 time:498s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:451s fi-kbl-r total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:500s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:573s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:429s fi-skl-6600u total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:507s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:525s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:497s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:490s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:430s fi-snb-2520m total:3 pass:2 dwarn:0 dfail:0 fail:0 skip:0 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:393s Blacklisted hosts: fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:557s fi-cnl-y total:244 pass:219 dwarn:0 dfail:0 fail:0 skip:24 fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:470s
0cb68b015fa3b8a40c65109737aed36d1985796b drm-tip: 2018y-01m-05d-17h-47m-51s UTC integration manifest b24dead8dba9 i915: pm: Be less agressive with clockfreq changes on Bay Trail
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7622/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for i915: pm: Be less agressive with clockfreq changes on Bay Trail (rev2)
In reply to Hans de Goede== Series Details ==
== Series Details ==
Series: i915: pm: Be less agressive with clockfreq changes on Bay Trail (rev2)
URL : https://patchwork.freedesktop.org/series/33541/
State : success
== Summary ==
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-offscren-pri-shrfb-draw-blt:
pass -> FAIL (shard-snb) fdo#101623 +1
Subgroup fbc-2p-primscrn-pri-shrfb-draw-pwrite:
incomplete -> SKIP (shard-hsw) fdo#104218
Test kms_flip:
Subgroup vblank-vs-modeset-suspend-interruptible:
pass -> SKIP (shard-hsw) fdo#103540
Test gem_softpin:
Subgroup noreloc-s4:
skip -> FAIL (shard-snb) fdo#103375 +1fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#104218 https://bugs.freedesktop.org/show_bug.cgi?id=104218
fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
shard-hsw total:2677 pass:1514 dwarn:1 dfail:0 fail:10 skip:1151 time:8588s shard-snb total:2713 pass:1310 dwarn:1 dfail:0 fail:11 skip:1391 time:7824s Blacklisted hosts: shard-apl total:2713 pass:1687 dwarn:1 dfail:0 fail:24 skip:1001 time:13335s shard-kbl total:2695 pass:1788 dwarn:1 dfail:0 fail:27 skip:878 time:10230s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7622/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx