Skip to contentSkip to conversation

staging: rtl8723bs: Fix multiple trailing semicolons

PATCH In review Luis de Bethencourt 2 participants 6 messages Jan 10, 2018 – Jan 11, 2018 Staging

lore
Share & tools
lore
#0 lore raw

v2 cover staging: rtl8723bs: Fix multiple trailing semicolons

Hi,

Removing the last patch from the original series after Dan's comment.

Tomorrow, I will send a new patch that removes the commented out code. This will replace that last patch.

Thanks for the review,
Luis

Luis de Bethencourt (2):
staging: rtl8723bs: Fix trailing semicolon
staging: rtl8723bs: Fix trailing semicolon

 drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c  | 2 +-
 drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
Signature · 1 line
2.15.1
#1 lore raw

PATCH v2 1/2 staging: rtl8723bs: Fix trailing semicolon

The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything.

---
 drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c +1 -1
index c16e147d8adc..a99a863be656 100644
@@ -1052,7 +1052,7 @@ static u8 phy_PathB_RxIQK8723B(struct adapter *padapter, bool configPathB)
 
 	/*  Check failed */
 	regEAC = PHY_QueryBBReg(pDM_Odm->Adapter, rRx_Power_After_IQK_A_2, bMaskDWord);
-	regEA4 = PHY_QueryBBReg(pDM_Odm->Adapter, rRx_Power_Before_IQK_A_2, bMaskDWord);;
+	regEA4 = PHY_QueryBBReg(pDM_Odm->Adapter, rRx_Power_Before_IQK_A_2, bMaskDWord);
 
 	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,  ("0xeac = 0x%x\n", regEAC));
 	ODM_RT_TRACE(pDM_Odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("0xea4 = 0x%x, 0xeac = 0x%x\n", regEA4, regEAC));
Signature · 1 line
2.15.1
#2 lore raw

PATCH v2 2/2 staging: rtl8723bs: Fix trailing semicolon

In reply to Luis de Bethencourt

The trailing semicolon is an empty statement that does nothing. Removing it since it has no purpose.

---
 drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c +1 -1
index 21ec890fd60c..e34d133075c0 100644
@@ -153,7 +153,7 @@ static u32 phy_RFSerialRead_8723B(
 	NewOffset = Offset;
 
 	if (eRFPath == RF_PATH_A) {
-		tmplong2 = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord);;
+		tmplong2 = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord);
 		tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge;	/* T65 RF */
 		PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord, tmplong2&(~bLSSIReadEdge));
 	} else {
Signature · 1 line
2.15.1
#3 lore raw
In reply to Luis de Bethencourt
Quoted 11 lines · Luis de Bethencourt

Hi,

Removing the last patch from the original series after Dan's comment.

Tomorrow, I will send a new patch that removes the commented out code. This will replace that last patch.

Thanks for the review,
Luis

Quoted 8 lines

Luis de Bethencourt (2):
staging: rtl8723bs: Fix trailing semicolon
staging: rtl8723bs: Fix trailing semicolon

 drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c  | 2 +-
 drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

A little bit too late but I just realized that instead of LKML (which is down), I can link to the archives of the driverdev mailing list instead.

Here is Dan's email which I reference above:
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-January/115392.html

Thanks,
Luis

#4 lore raw
Quoted 21 lines · Luis de Bethencourt
Quoted 11 lines · Luis de Bethencourt

Hi,

Removing the last patch from the original series after Dan's comment.

Tomorrow, I will send a new patch that removes the commented out code. This will replace that last patch.

Thanks for the review,
Luis

Quoted 8 lines

Luis de Bethencourt (2):
staging: rtl8723bs: Fix trailing semicolon
staging: rtl8723bs: Fix trailing semicolon

 drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c  | 2 +-
 drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
Quoted 8 lines

A little bit too late but I just realized that instead of LKML (which is down), I can link to the archives of the driverdev mailing list instead.

Here is Dan's email which I reference above:
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-January/115392.html

Thanks,
Luis

If you really want to remove these, perhaps do it treewide.

$ git grep -P -n ";\s*;\s*$" -- "*.[ch]"|grep -vw for|grep -vP ":\s+;\s*;\s*$"
arch/arc/kernel/setup.c:376:	char *opt_nm = NULL;;
arch/arc/kernel/unwind.c:369:	panic("Attention !!! Dwarf FDE parsing errors\n");;
arch/arm/include/asm/kvm_emulate.h:134:	return cpsr_mode > USR_MODE;;
arch/arm/kernel/time.c:86:static clock_access_fn __read_boot_clock = dummy_clock_access;;
arch/arm64/kernel/ptrace.c:1422:	int err, idx = compat_ptrace_hbp_num_to_idx(num);;
arch/mips/include/asm/checksum.h:113:	u32 sum = (__force u32)csum;;
arch/powerpc/kvm/book3s_xive.c:160:		return -ENOMEM;;
arch/powerpc/platforms/powernv/pci-ioda.c:1843:		return -ENODEV;;
arch/x86/boot/compressed/eboot.c:442:	u32 *handles = (u32 *)uga_handle;;
arch/x86/boot/compressed/eboot.c:487:	u64 *handles = (u64 *)uga_handle;;
block/sed-opal.c:493:		return -EOPNOTSUPP;;
drivers/clocksource/mips-gic-timer.c:208:		return -EINVAL;;
drivers/clocksource/mips-gic-timer.c:213:		return -EINVAL;;
drivers/clocksource/timer-sun5i.c:337:		return PTR_ERR(timer_base);;
drivers/dax/device.c:136:		return NULL;;
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c:721:	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {{{0}}};;
drivers/gpu/drm/amd/powerplay/amd_powerplay.c:165:			return -EINVAL;;
drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:683:		aspace = NULL;;
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c:645:			block = (size >> page[i].shift) << page[i].shift;;
drivers/gpu/drm/scheduler/gpu_scheduler.c:464:	int i;;
drivers/hwmon/lm75.c:103:			break;;
drivers/iommu/intel-svm.c:196:			unsigned long mask = __rounddown_pow_of_two(address ^ last);;
drivers/md/dm-thin.c:1725:			struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));;
drivers/md/raid1.c:1111:	r1_bio->behind_master_bio = behind_bio;;
drivers/net/can/rx-offload.c:259:	return can_rx_offload_init_queue(dev, offload, weight);;
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c:488:	mlx5e_close_channels(&epriv->channels);;
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h:1175:			u8 dummy4_1:1;;
drivers/pci/pci-driver.c:971:	return pm_generic_freeze_late(dev);;
drivers/powercap/intel_rapl.c:1212:	int nr_pl, ret;;
drivers/soc/imx/gpc.c:351:				return PTR_ERR(domain->supply);;
drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c:1055:	regEA4 = PHY_QueryBBReg(pDM_Odm->Adapter, rRx_Power_Before_IQK_A_2, bMaskDWord);;
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:156:		tmplong2 = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord);;
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:970:			ret = -EINVAL;;
drivers/target/target_core_user.c:1409:	return ret;;
include/net/vxlan.h:304:		return features;;
net/netfilter/nft_dynset.c:167:	err = nft_validate_register_load(priv->sreg_key, set->klen);;
samples/bpf/xdp_monitor_kern.c:107:	u64 *cnt;;
scripts/mod/modpost.c:1688:	const char *tosec = sec_name(elf, get_secindex(elf, sym));;
sound/core/pcm_native.c:3449:	struct snd_pcm_runtime *runtime = substream->runtime;;
sound/soc/codecs/cs42l73.c:1358:		return ret;;
tools/perf/util/evlist.c:1763:			goto state_err;;
tools/testing/selftests/nsfs/pidns.c:73:			return pr_err("Don't get EPERM");;
#5 lore raw
Quoted 68 lines · Joe Perches
Quoted 21 lines · Luis de Bethencourt
Quoted 11 lines · Luis de Bethencourt

Hi,

Removing the last patch from the original series after Dan's comment.

Tomorrow, I will send a new patch that removes the commented out code. This will replace that last patch.

Thanks for the review,
Luis

Quoted 8 lines

Luis de Bethencourt (2):
staging: rtl8723bs: Fix trailing semicolon
staging: rtl8723bs: Fix trailing semicolon

 drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c  | 2 +-
 drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
Quoted 8 lines

A little bit too late but I just realized that instead of LKML (which is down), I can link to the archives of the driverdev mailing list instead.

Here is Dan's email which I reference above:
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-January/115392.html

Thanks,
Luis

If you really want to remove these, perhaps do it treewide.

$ git grep -P -n ";\s*;\s*$" -- "*.[ch]"|grep -vw for|grep -vP ":\s+;\s*;\s*$"
arch/arc/kernel/setup.c:376:	char *opt_nm = NULL;;
arch/arc/kernel/unwind.c:369:	panic("Attention !!! Dwarf FDE parsing errors\n");;
arch/arm/include/asm/kvm_emulate.h:134:	return cpsr_mode > USR_MODE;;
arch/arm/kernel/time.c:86:static clock_access_fn __read_boot_clock = dummy_clock_access;;
arch/arm64/kernel/ptrace.c:1422:	int err, idx = compat_ptrace_hbp_num_to_idx(num);;
arch/mips/include/asm/checksum.h:113:	u32 sum = (__force u32)csum;;
arch/powerpc/kvm/book3s_xive.c:160:		return -ENOMEM;;
arch/powerpc/platforms/powernv/pci-ioda.c:1843:		return -ENODEV;;
arch/x86/boot/compressed/eboot.c:442:	u32 *handles = (u32 *)uga_handle;;
arch/x86/boot/compressed/eboot.c:487:	u64 *handles = (u64 *)uga_handle;;
block/sed-opal.c:493:		return -EOPNOTSUPP;;
drivers/clocksource/mips-gic-timer.c:208:		return -EINVAL;;
drivers/clocksource/mips-gic-timer.c:213:		return -EINVAL;;
drivers/clocksource/timer-sun5i.c:337:		return PTR_ERR(timer_base);;
drivers/dax/device.c:136:		return NULL;;
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c:721:	union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {{{0}}};;
drivers/gpu/drm/amd/powerplay/amd_powerplay.c:165:			return -EINVAL;;
drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:683:		aspace = NULL;;
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c:645:			block = (size >> page[i].shift) << page[i].shift;;
drivers/gpu/drm/scheduler/gpu_scheduler.c:464:	int i;;
drivers/hwmon/lm75.c:103:			break;;
drivers/iommu/intel-svm.c:196:			unsigned long mask = __rounddown_pow_of_two(address ^ last);;
drivers/md/dm-thin.c:1725:			struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));;
drivers/md/raid1.c:1111:	r1_bio->behind_master_bio = behind_bio;;
drivers/net/can/rx-offload.c:259:	return can_rx_offload_init_queue(dev, offload, weight);;
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c:488:	mlx5e_close_channels(&epriv->channels);;
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h:1175:			u8 dummy4_1:1;;
drivers/pci/pci-driver.c:971:	return pm_generic_freeze_late(dev);;
drivers/powercap/intel_rapl.c:1212:	int nr_pl, ret;;
drivers/soc/imx/gpc.c:351:				return PTR_ERR(domain->supply);;
drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c:1055:	regEA4 = PHY_QueryBBReg(pDM_Odm->Adapter, rRx_Power_Before_IQK_A_2, bMaskDWord);;
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:156:		tmplong2 = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord);;
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:970:			ret = -EINVAL;;
drivers/target/target_core_user.c:1409:	return ret;;
Quoted 9 lines
include/net/vxlan.h:304:		return features;;
net/netfilter/nft_dynset.c:167:	err = nft_validate_register_load(priv->sreg_key, set->klen);;
samples/bpf/xdp_monitor_kern.c:107:	u64 *cnt;;
scripts/mod/modpost.c:1688:	const char *tosec = sec_name(elf, get_secindex(elf, sym));;
sound/core/pcm_native.c:3449:	struct snd_pcm_runtime *runtime = substream->runtime;;
sound/soc/codecs/cs42l73.c:1358:		return ret;;
tools/perf/util/evlist.c:1763:			goto state_err;;
tools/testing/selftests/nsfs/pidns.c:73:			return pr_err("Don't get EPERM");;

Hi Joe,

I was following the good-old premise of reading/fixing the code for hardware you have.

Since you think there is value on fixing the trailing semicolons treewide. I will slowly do that over the next few days.

Thanks for the feedback,
Luis