Skip to contentSkip to conversation

ICP initial support

PATCH In review Paulo Zanoni 5 participants 26 messages Jan 11, 2018 – Jan 20, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover ICP initial support

Hi

This series adds the initial support for ICP. No conflicts with the other series. Patches 1 and 2 are parts of other series that we've already been discussing on this mailing list, but I put them here so CI can do the right thing.

I have just re-reviewed all of Anusha's patches and my reviewed-by tags still stand, which means every patch on this series has a r-b tag. I'll let the series sit on the mailing list for a while before merging, just in case someone else has something to say.

The one thing missing for complete ICP support is the patch that adds the interrupts, but that requires code from other series (including the GEM one currently under review), so it will be sent later.

Thanks,
Paulo

Anusha Srivatsa (6):
drm/i915/icp: Introduce Ice Lake PCH drm/i915/icp: Get/set proper Raw clock frequency on ICP drm/i915/icp: Add Panel Power Sequencing Support drm/i915/icp: Add backlight Support for ICP drm/i915/icp: add ICP gmbus and gpio support drm/i915/icp: Add the ID for ICL PCH - ICP

Rodrigo Vivi (2):
drm/i915/cnl: Add Port F definition.
drm/i915/icl: Add initial Icelake definitions.

 drivers/gpu/drm/i915/i915_drv.c          |  4 ++++
 drivers/gpu/drm/i915/i915_drv.h          |  5 +++++
 drivers/gpu/drm/i915/i915_pci.c          | 13 +++++++++++++
 drivers/gpu/drm/i915/i915_reg.h          |  9 ++++++++-
 drivers/gpu/drm/i915/intel_bios.c        |  9 +++++++++
 drivers/gpu/drm/i915/intel_cdclk.c       | 29 ++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_device_info.c |  1 +
 drivers/gpu/drm/i915/intel_device_info.h |  2 ++
 drivers/gpu/drm/i915/intel_display.h     |  1 +
 drivers/gpu/drm/i915/intel_dp.c          | 20 +++++++++++++------
 drivers/gpu/drm/i915/intel_hdmi.c        | 33 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_i2c.c         | 17 ++++++++++++++--
 drivers/gpu/drm/i915/intel_panel.c       |  2 +-
 drivers/gpu/drm/i915/intel_vbt_defs.h    |  2 ++
 include/drm/i915_component.h             |  3 +--
 15 files changed, 136 insertions(+), 14 deletions(-)
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/8 drm/i915/cnl: Add Port F definition.

From: Rodrigo Vivi <[email protected]>

Some Cannonlake SKUs will come with a full split between port A and port E. This will be called port F although it is not a 6th port, but only a split.

Note this patch alone is not sufficient for port F enabling, it's just the first step.

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.
v6 (from Paulo): improve commit message, bikeshed bit definitions.

---
 drivers/gpu/drm/i915/intel_bios.c     | 9 +++++++++
 drivers/gpu/drm/i915/intel_display.h  | 1 +
 drivers/gpu/drm/i915/intel_dp.c       | 2 ++
 drivers/gpu/drm/i915/intel_vbt_defs.h | 2 ++
 include/drm/i915_component.h          | 3 +--
 5 files changed, 15 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +9 -0
index 51108ffc28d1..59a150e2adce 100644
@@ -1140,6 +1140,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
 		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
 		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
+		{DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
 	};
 
 	/*
@@ -1688,6 +1689,7 @@ bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port por
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 	int i;
 
@@ -1726,6 +1728,7 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
 		[PORT_C] = DVO_PORT_DPC,
 		[PORT_D] = DVO_PORT_DPD,
 		[PORT_E] = DVO_PORT_DPE,
+		[PORT_F] = DVO_PORT_DPF,
 	};
 	int i;
 
@@ -1761,6 +1764,7 @@ static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 
 	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
@@ -1927,6 +1931,11 @@ intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv,
 			if (port == PORT_D)
 				return true;
 			break;
+		case DVO_PORT_DPF:
+		case DVO_PORT_HDMIF:
+			if (port == PORT_F)
+				return true;
+			break;
 		default:
 			break;
 		}
drivers/gpu/drm/i915/intel_display.h +1 -0
index a0d2b6169361..e47638931b51 100644
@@ -119,6 +119,7 @@ enum port {
 	PORT_C,
 	PORT_D,
 	PORT_E,
+	PORT_F,
 
 	I915_MAX_PORTS
 };
drivers/gpu/drm/i915/intel_dp.c +2 -0
index 68229f53d5b8..46937a8c48cc 100644
@@ -1402,6 +1402,7 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_CTL(port);
 	default:
 		MISSING_CASE(port);
@@ -1417,6 +1418,7 @@ static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_DATA(port, index);
 	default:
 		MISSING_CASE(port);
drivers/gpu/drm/i915/intel_vbt_defs.h +2 -0
index e3d7745a9151..b5d2341f932c 100644
@@ -299,6 +299,8 @@ struct bdb_general_features {
 #define DVO_PORT_DPA		10
 #define DVO_PORT_DPE		11				/* 193 */
 #define DVO_PORT_HDMIE		12				/* 193 */
+#define DVO_PORT_DPF		13				/* N/A */
+#define DVO_PORT_HDMIF		14				/* N/A */
 #define DVO_PORT_MIPIA		21				/* 171 */
 #define DVO_PORT_MIPIB		22				/* 171 */
 #define DVO_PORT_MIPIC		23				/* 171 */
include/drm/i915_component.h +1 -2
index 545c6e0fea7d..346b1f5cb180 100644
@@ -26,9 +26,8 @@
 
 /* MAX_PORT is the number of port
  * It must be sync with I915_MAX_PORTS defined i915_drv.h
- * 5 should be enough as only HSW, BDW, SKL need such fix.
  */
-#define MAX_PORTS 5
+#define MAX_PORTS 6
 
 /**
  * struct i915_audio_component_ops - Ops implemented by i915 driver, called by hda driver
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer Acked-by on v1 1/8
#2 lore raw

Re: [PATCH 1/8] drm/i915/cnl: Add Port F definition.

Quoted 9 lines · Paulo Zanoni

From: Rodrigo Vivi <[email protected]>

Some Cannonlake SKUs will come with a full split between port A and port E. This will be called port F although it is not a 6th port, but only a split.

Note this patch alone is not sufficient for port F enabling, it's just the first step.

Quoted 6 lines

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.

v6 (from Paulo): improve commit message, bikeshed bit definitions.

Thanks

Quoted 125 lines
---
 drivers/gpu/drm/i915/intel_bios.c     | 9 +++++++++
 drivers/gpu/drm/i915/intel_display.h  | 1 +
 drivers/gpu/drm/i915/intel_dp.c       | 2 ++
 drivers/gpu/drm/i915/intel_vbt_defs.h | 2 ++
 include/drm/i915_component.h          | 3 +--
 5 files changed, 15 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +9 -0
index 51108ffc28d1..59a150e2adce 100644
@@ -1140,6 +1140,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
 		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
 		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
+		{DVO_PORT_HDMIF, DVO_PORT_DPF, -1},
 	};
 
 	/*
@@ -1688,6 +1689,7 @@ bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port por
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 	int i;
 
@@ -1726,6 +1728,7 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
 		[PORT_C] = DVO_PORT_DPC,
 		[PORT_D] = DVO_PORT_DPD,
 		[PORT_E] = DVO_PORT_DPE,
+		[PORT_F] = DVO_PORT_DPF,
 	};
 	int i;
 
@@ -1761,6 +1764,7 @@ static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
 		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
 		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
 		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+		[PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
 	};
 
 	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
@@ -1927,6 +1931,11 @@ intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv,
 			if (port == PORT_D)
 				return true;
 			break;
+		case DVO_PORT_DPF:
+		case DVO_PORT_HDMIF:
+			if (port == PORT_F)
+				return true;
+			break;
 		default:
 			break;
 		}
drivers/gpu/drm/i915/intel_display.h +1 -0
index a0d2b6169361..e47638931b51 100644
@@ -119,6 +119,7 @@ enum port {
 	PORT_C,
 	PORT_D,
 	PORT_E,
+	PORT_F,
 
 	I915_MAX_PORTS
 };
drivers/gpu/drm/i915/intel_dp.c +2 -0
index 68229f53d5b8..46937a8c48cc 100644
@@ -1402,6 +1402,7 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_CTL(port);
 	default:
 		MISSING_CASE(port);
@@ -1417,6 +1418,7 @@ static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv,
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
+	case PORT_F:
 		return DP_AUX_CH_DATA(port, index);
 	default:
 		MISSING_CASE(port);
drivers/gpu/drm/i915/intel_vbt_defs.h +2 -0
index e3d7745a9151..b5d2341f932c 100644
@@ -299,6 +299,8 @@ struct bdb_general_features {
 #define DVO_PORT_DPA		10
 #define DVO_PORT_DPE		11				/* 193 */
 #define DVO_PORT_HDMIE		12				/* 193 */
+#define DVO_PORT_DPF		13				/* N/A */
+#define DVO_PORT_HDMIF		14				/* N/A */
 #define DVO_PORT_MIPIA		21				/* 171 */
 #define DVO_PORT_MIPIB		22				/* 171 */
 #define DVO_PORT_MIPIC		23				/* 171 */
include/drm/i915_component.h +1 -2
index 545c6e0fea7d..346b1f5cb180 100644
@@ -26,9 +26,8 @@
 
 /* MAX_PORT is the number of port
  * It must be sync with I915_MAX_PORTS defined i915_drv.h
- * 5 should be enough as only HSW, BDW, SKL need such fix.
  */
-#define MAX_PORTS 5
+#define MAX_PORTS 6
 
 /**
  * struct i915_audio_component_ops - Ops implemented by i915 driver, called by hda driver
Signature · 1 line
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

PATCH 2/8 drm/i915/icl: Add initial Icelake definitions.

In reply to Paulo Zanoni

From: Rodrigo Vivi <[email protected]>

Icelake is an Intel® Processor containing an Intel® Graphics Controller.

This is just an initial Icelake definition. PCI IDs, Icelake support and new features coming in following patches.

v2: Add .ddb_size and .has_guc (Michal Wajdeczko).
v3: Add the ICL_FEATURES macro (Kelvin Gardiner).
v4 (from Paulo): Add missing __initconst (Paulo) and say "graphics controller" instead of something that looks like an official marketing name but isn't (Chris).

---
 drivers/gpu/drm/i915/i915_drv.h          |  2 ++
 drivers/gpu/drm/i915/i915_pci.c          | 13 +++++++++++++
 drivers/gpu/drm/i915/intel_device_info.c |  1 +
 drivers/gpu/drm/i915/intel_device_info.h |  2 ++
 4 files changed, 18 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +2 -0
index a689396d0ff6..016920f58ae6 100644
@@ -2595,6 +2595,7 @@ intel_info(const struct drm_i915_private *dev_priv)
 #define IS_GEMINILAKE(dev_priv)	IS_PLATFORM(dev_priv, INTEL_GEMINILAKE)
 #define IS_COFFEELAKE(dev_priv)	IS_PLATFORM(dev_priv, INTEL_COFFEELAKE)
 #define IS_CANNONLAKE(dev_priv)	IS_PLATFORM(dev_priv, INTEL_CANNONLAKE)
+#define IS_ICELAKE(dev_priv)	IS_PLATFORM(dev_priv, INTEL_ICELAKE)
 #define IS_MOBILE(dev_priv)	((dev_priv)->info.is_mobile)
 #define IS_HSW_EARLY_SDV(dev_priv) (IS_HASWELL(dev_priv) && \
 				    (INTEL_DEVID(dev_priv) & 0xFF00) == 0x0C00)
@@ -2706,6 +2707,7 @@ intel_info(const struct drm_i915_private *dev_priv)
 #define IS_GEN8(dev_priv)	(!!((dev_priv)->info.gen_mask & BIT(7)))
 #define IS_GEN9(dev_priv)	(!!((dev_priv)->info.gen_mask & BIT(8)))
 #define IS_GEN10(dev_priv)	(!!((dev_priv)->info.gen_mask & BIT(9)))
+#define IS_GEN11(dev_priv)	(!!((dev_priv)->info.gen_mask & BIT(10)))
 
 #define IS_LP(dev_priv)	(INTEL_INFO(dev_priv)->is_lp)
 #define IS_GEN9_LP(dev_priv)	(IS_GEN9(dev_priv) && IS_LP(dev_priv))
drivers/gpu/drm/i915/i915_pci.c +13 -0
index 36d48422b475..f28c165fc49d 100644
@@ -579,6 +579,19 @@ static const struct intel_device_info intel_cannonlake_gt2_info __initconst = {
 	.gt = 2,
 };
 
+#define GEN11_FEATURES \
+	GEN10_FEATURES, \
+	.gen = 11, \
+	.ddb_size = 2048, \
+	.has_csr = 0
+
+static const struct intel_device_info intel_icelake_11_info __initconst = {
+	GEN11_FEATURES,
+	.platform = INTEL_ICELAKE,
+	.is_alpha_support = 1,
+	.has_resource_streamer = 0,
+};
+
 /*
  * Make sure any device matches here are from most specific to most
  * general.  For example, since the Quanta match is based on the subsystem
drivers/gpu/drm/i915/intel_device_info.c +1 -0
index d28592e43512..a2c16140169f 100644
@@ -56,6 +56,7 @@ static const char * const platform_names[] = {
 	PLATFORM_NAME(GEMINILAKE),
 	PLATFORM_NAME(COFFEELAKE),
 	PLATFORM_NAME(CANNONLAKE),
+	PLATFORM_NAME(ICELAKE),
 };
 #undef PLATFORM_NAME
 
drivers/gpu/drm/i915/intel_device_info.h +2 -0
index 49cb27bd04c1..9542018d11d0 100644
@@ -69,6 +69,8 @@ enum intel_platform {
 	INTEL_COFFEELAKE,
 	/* gen10 */
 	INTEL_CANNONLAKE,
+	/* gen11 */
+	INTEL_ICELAKE,
 	INTEL_MAX_PLATFORMS
 };
 
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH 3/8 drm/i915/icp: Introduce Ice Lake PCH

In reply to Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

Add the enum additions to ICP PCH.

v2 (from Paulo): don't set any platforms to it yet since ICP support is incomplete.
v3 (from Rodrigo): Fix ICP name.

---
 drivers/gpu/drm/i915/i915_drv.h | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +2 -0
index 016920f58ae6..482517af58f6 100644
@@ -783,6 +783,7 @@ enum intel_pch {
 	PCH_SPT,        /* Sunrisepoint PCH */
 	PCH_KBP,        /* Kaby Lake PCH */
 	PCH_CNP,        /* Cannon Lake PCH */
+	PCH_ICP,	/* Ice Lake PCH */
 	PCH_NOP,
 };
 
@@ -2850,6 +2851,7 @@ intel_info(const struct drm_i915_private *dev_priv)
 #define INTEL_PCH_QEMU_DEVICE_ID_TYPE		0x2900 /* qemu q35 has 2918 */
 
 #define INTEL_PCH_TYPE(dev_priv) ((dev_priv)->pch_type)
+#define HAS_PCH_ICP(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_ICP)
 #define HAS_PCH_CNP(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_CNP)
 #define HAS_PCH_CNP_LP(dev_priv) \
 	((dev_priv)->pch_id == INTEL_PCH_CNP_LP_DEVICE_ID_TYPE)
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH 4/8 drm/i915/icp: Get/set proper Raw clock frequency on ICP

In reply to Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

Add register definitions for setting the rawclock. Set the numerator,denominator and divider values.

v2: Simplify the commit message. Simplify the math. Add register bits for numerator. (Paulo) v3 (from Paulo): coding style bikesheds.

---
 drivers/gpu/drm/i915/i915_reg.h    |  2 ++
 drivers/gpu/drm/i915/intel_cdclk.c | 29 +++++++++++++++++++++++++++--
 2 files changed, 29 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -0
index c0a4fc356145..f756512041c6 100644
@@ -7352,6 +7352,8 @@ enum {
 #define  CNP_RAWCLK_DIV(div)	((div) << 16)
 #define  CNP_RAWCLK_FRAC_MASK	(0xf << 26)
 #define  CNP_RAWCLK_FRAC(frac)	((frac) << 26)
+#define  ICP_RAWCLK_DEN(den)	((den) << 26)
+#define  ICP_RAWCLK_NUM(num)	((num) << 11)
 
 #define PCH_DPLL_TMR_CFG        _MMIO(0xc6208)
 
drivers/gpu/drm/i915/intel_cdclk.c +27 -2
index ca36321eafac..4f921fd331fd 100644
@@ -2342,6 +2342,30 @@ static int cnp_rawclk(struct drm_i915_private *dev_priv)
 	return divider + fraction;
 }
 
+static int icp_rawclk(struct drm_i915_private *dev_priv)
+{
+	u32 rawclk;
+	int divider, numerator, denominator, frequency;
+
+	if (I915_READ(SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) {
+		frequency = 24000;
+		divider = 23;
+		numerator = 0;
+		denominator = 0;
+	} else {
+		frequency = 19200;
+		divider = 18;
+		numerator = 1;
+		denominator = 4;
+	}
+
+	rawclk = CNP_RAWCLK_DIV(divider) | ICP_RAWCLK_NUM(numerator) |
+		 ICP_RAWCLK_DEN(denominator);
+
+	I915_WRITE(PCH_RAWCLK_FREQ, rawclk);
+	return frequency;
+}
+
 static int pch_rawclk(struct drm_i915_private *dev_priv)
 {
 	return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
@@ -2389,8 +2413,9 @@ static int g4x_hrawclk(struct drm_i915_private *dev_priv)
  */
 void intel_update_rawclk(struct drm_i915_private *dev_priv)
 {
-
-	if (HAS_PCH_CNP(dev_priv))
+	if (HAS_PCH_ICP(dev_priv))
+		dev_priv->rawclk_freq = icp_rawclk(dev_priv);
+	else if (HAS_PCH_CNP(dev_priv))
 		dev_priv->rawclk_freq = cnp_rawclk(dev_priv);
 	else if (HAS_PCH_SPLIT(dev_priv))
 		dev_priv->rawclk_freq = pch_rawclk(dev_priv);
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH 5/8 drm/i915/icp: Add Panel Power Sequencing Support

In reply to Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

ICP, like BXT, has has two panel power sequencers.

v2: Simplify the code. Remove unwanted register definitions. Make code as close to BXT style as possible. (Ville) Also, remove the use of ICP_SECOND_PPS_BACKLIGHT for now. Moving forward, if we are sure we need to set this register, we can access it.

v3: Use INTEL_GEN(dev_priv), make code more readeable. (Ville)

v4 (from Paulo):
- Coding style fixes.
- Add a missing HAS_PCH_CNP -> gen10+ check.
- Rebase.

v5: Use per platform checks rather than INTEL_GEN().
v4 of this patch breaks on CoffeeLake, since CFL uses CNP and per platform check makes sense in that case.

v6 (from Paulo):
- v5 was a patch on top of v4, not a new version. Now v6 is correctly a new version of the original patch.

---
 drivers/gpu/drm/i915/intel_dp.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +12 -6
index 46937a8c48cc..cdfdacf27939 100644
@@ -796,7 +796,8 @@ static void intel_pps_get_registers(struct intel_dp *intel_dp,
 	regs->pp_stat = PP_STATUS(pps_idx);
 	regs->pp_on = PP_ON_DELAYS(pps_idx);
 	regs->pp_off = PP_OFF_DELAYS(pps_idx);
-	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv))
+	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv) &&
+	    !HAS_PCH_ICP(dev_priv))
 		regs->pp_div = PP_DIVISOR(pps_idx);
 }
 
@@ -5453,7 +5454,8 @@ intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
 
 	pp_on = I915_READ(regs.pp_on);
 	pp_off = I915_READ(regs.pp_off);
-	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv)) {
+	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv) &&
+	    !HAS_PCH_ICP(dev_priv)) {
 		I915_WRITE(regs.pp_ctrl, pp_ctl);
 		pp_div = I915_READ(regs.pp_div);
 	}
@@ -5471,7 +5473,8 @@ intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
 	seq->t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
 		   PANEL_POWER_DOWN_DELAY_SHIFT;
 
-	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+	    HAS_PCH_ICP(dev_priv)) {
 		seq->t11_t12 = ((pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
 				BXT_POWER_CYCLE_DELAY_SHIFT) * 1000;
 	} else {
@@ -5642,7 +5645,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
 		 (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
 	/* Compute the divisor for the pp clock, simply match the Bspec
 	 * formula. */
-	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+	    HAS_PCH_ICP(dev_priv)) {
 		pp_div = I915_READ(regs.pp_ctrl);
 		pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
 		pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
@@ -5668,7 +5672,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
 
 	I915_WRITE(regs.pp_on, pp_on);
 	I915_WRITE(regs.pp_off, pp_off);
-	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv) ||
+	    HAS_PCH_ICP(dev_priv))
 		I915_WRITE(regs.pp_ctrl, pp_div);
 	else
 		I915_WRITE(regs.pp_div, pp_div);
@@ -5676,7 +5681,8 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
 	DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
 		      I915_READ(regs.pp_on),
 		      I915_READ(regs.pp_off),
-		      (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) ?
+		      (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)  ||
+		       HAS_PCH_ICP(dev_priv)) ?
 		      (I915_READ(regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK) :
 		      I915_READ(regs.pp_div));
 }
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

PATCH 6/8 drm/i915/icp: Add backlight Support for ICP

In reply to Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +1 -1
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) || HAS_PCH_ICP(dev_priv)) {
 		panel->backlight.setup = cnp_setup_backlight;
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable = cnp_disable_backlight;
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Quoted 24 lines · Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +0 -0
index fa6831f8c004..ad80cca8c110 100644

drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel *panel) · line 1868

Quoted 5 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) || HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP - which one should it be?

Quoted 10 lines
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.setup = cnp_setup_backlight;
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable = cnp_disable_backlight;
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#9 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Quoted 20 lines · James Ausmus
Quoted 19 lines · Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 13 lines

drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel *panel) · line 1868

Quoted 10 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) || HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP - which one should it be?

well,
CNP is like BXT, but with only one controller.
ICP is like BXT, including 2 controllers.

I don't know if it makes more sense re-use the cnp or bxt functions

But one way or another we have to address these lines from cnp_setup:

/*
* CNP has the BXT implementation of backlight, but with only
* one controller. Future platforms could have multiple controll\
ers

         * so let's make this extensible and prepared for the future.
         */
        panel->backlight.controller = 0;
Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_panel.c +0 -1
 		panel->backlight.setup = cnp_setup_backlight;
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable = cnp_disable_backlight;
--

2.14.3

Quoted 8 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Em Qui, 2018-01-11 às 15:57 -0800, Rodrigo Vivi escreveu:

Quoted 48 lines · James Ausmus
Quoted 30 lines · Paulo Zanoni
Quoted 29 lines

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like
BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +0 -0
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct
 intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
Quoted 8 lines

drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel *panel)

Quoted 4 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) ||
 HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP - which
one should it be?

well,
CNP is like BXT, but with only one controller.
ICP is like BXT, including 2 controllers.

I don't know if it makes more sense re-use the cnp or bxt functions

But one way or another we have to address these lines from cnp_setup:

Quoted 8 lines

/*
* CNP has the BXT implementation of backlight, but with only
* one controller. Future platforms could have multiple
controll\
ers

         * so let's make this extensible and prepared for the future.
         */
        panel->backlight.controller = 0;

My understanding is that we're only using one of the controllers on ICP on purpose, so we can perfectly reuse the CNP code.

But I'll let Anusha comment on this.

Quoted 14 lines
Quoted 14 lines
Quoted 13 lines
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.setup = cnp_setup_backlight;
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable =

cnp_disable_backlight;
--
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Quoted 58 lines · Paulo Zanoni

Em Qui, 2018-01-11 às 15:57 -0800, Rodrigo Vivi escreveu:

Quoted 48 lines · James Ausmus
Quoted 30 lines · Paulo Zanoni
Quoted 29 lines

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like
BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +0 -0
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct
 intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
Quoted 8 lines

drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel *panel)

Quoted 4 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) ||
 HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP - which
one should it be?

well,
CNP is like BXT, but with only one controller.
ICP is like BXT, including 2 controllers.

I don't know if it makes more sense re-use the cnp or bxt functions

But one way or another we have to address these lines from cnp_setup:

Quoted 8 lines

/*
* CNP has the BXT implementation of backlight, but with only
* one controller. Future platforms could have multiple
controll\
ers

         * so let's make this extensible and prepared for the future.
         */
        panel->backlight.controller = 0;
Quoted 4 lines

My understanding is that we're only using one of the controllers on ICP on purpose, so we can perfectly reuse the CNP code.

But I'll let Anusha comment on this.

This is intentional. Commit message is trying to tell the similarity in backlight support. But we need to reuse CNP code ultimstely.

Regards,
Anusha

Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Quoted 9 lines
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.setup = cnp_setup_backlight;
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable =

cnp_disable_backlight;
--
2.14.3

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 5 lines
Anusha Srivatsa
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#12 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Quoted 59 lines · Anusha Srivatsa
Quoted 58 lines · Paulo Zanoni

Em Qui, 2018-01-11 às 15:57 -0800, Rodrigo Vivi escreveu:

Quoted 56 lines · James Ausmus
Quoted 30 lines · Paulo Zanoni
Quoted 29 lines

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like
BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +0 -0
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct
 intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
Quoted 8 lines

drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel *panel)

Quoted 4 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) ||
 HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP - which
one should it be?

well,
CNP is like BXT, but with only one controller.
ICP is like BXT, including 2 controllers.

I don't know if it makes more sense re-use the cnp or bxt functions

But one way or another we have to address these lines from cnp_setup:

/*
* CNP has the BXT implementation of backlight, but with only
* one controller. Future platforms could have multiple
controll\
ers

         * so let's make this extensible and prepared for the future.
         */
        panel->backlight.controller = 0;
Quoted 7 lines
Quoted 4 lines

My understanding is that we're only using one of the controllers on ICP on purpose, so we can perfectly reuse the CNP code.

But I'll let Anusha comment on this.

This is intentional. Commit message is trying to tell the similarity in backlight support. But we need to reuse CNP code ultimstely.

So it is probably better to update this comment here explaining that we know it has more than 1 controller but we intentionally only use the '0' one.

But my question now is why?

Quoted 17 lines

Regards,
Anusha

Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
Quoted 13 lines
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.setup = cnp_setup_backlight;
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable =

cnp_disable_backlight;
--
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 1 line
Anusha Srivatsa

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#13 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Em Sex, 2018-01-19 às 09:56 -0800, Rodrigo Vivi escreveu:

Quoted 75 lines · Anusha Srivatsa
Quoted 74 lines · Paulo Zanoni
Quoted 72 lines

Em Qui, 2018-01-11 às 15:57 -0800, Rodrigo Vivi escreveu:

Quoted 63 lines · James Ausmus
Quoted 35 lines · Paulo Zanoni
Quoted 34 lines

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms
like
BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani)
Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +0 -0
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@

intel_panel_init_backlight_funcs(struct
intel_panel *panel)

drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
 		panel->backlight.hz_to_pwm =

bxt_hz_to_pwm;

Quoted 8 lines
Quoted 3 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) ||

HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP -
which
one should it be?

well,
CNP is like BXT, but with only one controller.
ICP is like BXT, including 2 controllers.

I don't know if it makes more sense re-use the cnp or bxt functions

But one way or another we have to address these lines from cnp_setup:

/*
* CNP has the BXT implementation of backlight, but
with only
* one controller. Future platforms could have multiple
controll\
ers
* so let's make this extensible and prepared for the
future.

Quoted 2 lines
         */
        panel->backlight.controller = 0;

My understanding is that we're only using one of the controllers on ICP
on purpose, so we can perfectly reuse the CNP code.

But I'll let Anusha comment on this.

Quoted 7 lines
Quoted 3 lines

This is intentional. Commit message is trying to tell the similarity
in backlight support. But we need to reuse CNP code ultimstely.

So it is probably better to update this comment here explaining that we know it has more than 1 controller but we intentionally only use the '0' one.

I think the cnp_setup_backlight comment is appropriate as-is because we're still only using one controller for ICP. We should probably only update it if we start using ICP's second controller (because we never tested controller 1 and we don't know if the code is actually 100% prepared for the future). Do you have any specific suggestions on what to write here?

Quoted 2 lines

But my question now is why?

Pretty much because there's no use for it for now.

Quoted 20 lines
Quoted 20 lines

Regards,
Anusha

Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
Quoted 15 lines

panel->backlight.setup =
cnp_setup_backlight;
panel->backlight.enable =
cnp_enable_backlight;
panel->backlight.disable =
cnp_disable_backlight;
--
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 1 line
Anusha Srivatsa

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#14 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Quoted 87 lines

-----Original Message-----
From: Zanoni, Paulo R
Sent: Friday, January 19, 2018 10:25 AM
To: Vivi, Rodrigo <[email protected]>; Srivatsa, Anusha <[email protected]>
Cc: Ausmus, James <[email protected]>; Nikula, Jani <[email protected]>; [email protected]
Subject: Re: [Intel-gfx] [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Em Sex, 2018-01-19 às 09:56 -0800, Rodrigo Vivi escreveu:

Quoted 66 lines · Anusha Srivatsa
Quoted 65 lines · Paulo Zanoni
Quoted 64 lines

Em Qui, 2018-01-11 às 15:57 -0800, Rodrigo Vivi escreveu:

Quoted 57 lines · James Ausmus
Quoted 30 lines · Paulo Zanoni
Quoted 29 lines

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani)
Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +0 -0
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@

intel_panel_init_backlight_funcs(struct intel_panel *panel)
panel->backlight.set = bxt_set_backlight;

Quoted 8 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
 		panel->backlight.get = bxt_get_backlight;
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) ||

HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP
- which one should it be?

well,
CNP is like BXT, but with only one controller.
ICP is like BXT, including 2 controllers.

I don't know if it makes more sense re-use the cnp or bxt functions

But one way or another we have to address these lines from cnp_setup:

/*
* CNP has the BXT implementation of backlight, but with
only
* one controller. Future platforms could have multiple
controll\ ers
* so let's make this extensible and prepared for the
future.

Quoted 2 lines
         */
        panel->backlight.controller = 0;

My understanding is that we're only using one of the controllers on ICP on purpose, so we can perfectly reuse the CNP code.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

But I'll let Anusha comment on this.

This is intentional. Commit message is trying to tell the similarity in backlight support. But we need to reuse CNP code ultimstely.

So it is probably better to update this comment here explaining that we know it has more than 1 controller but we intentionally only use the '0' one.

Quoted 5 lines

I think the cnp_setup_backlight comment is appropriate as-is because we're still only using one controller for ICP. We should probably only update it if we start using ICP's second controller (because we never tested controller 1 and we don't know if the code is actually 100% prepared for the future). Do you have any specific suggestions on what to write here?

Will something like - "We are currently using only one of two backlight controllers on ICP. Hence, reuse the CNP code." Suffice?

Anusha

Quoted 30 lines
Quoted 2 lines

But my question now is why?

Pretty much because there's no use for it for now.

Quoted 25 lines
Quoted 25 lines

Regards,
Anusha

Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
Quoted 13 lines

panel->backlight.setup =
cnp_setup_backlight;

drivers/gpu/drm/i915/intel_panel.c +0 -1
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable = cnp_disable_backlight;
--

2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
Anusha Srivatsa

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#15 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

In reply to Anusha Srivatsa
Quoted 59 lines · Anusha Srivatsa
Quoted 58 lines · Paulo Zanoni

Em Qui, 2018-01-11 às 15:57 -0800, Rodrigo Vivi escreveu:

Quoted 56 lines · James Ausmus
Quoted 30 lines · Paulo Zanoni
Quoted 29 lines

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like
BXT.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse BXT code since it is very similar.(Ville)

v3 (from Paulo): Rebase.

---
 drivers/gpu/drm/i915/intel_panel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_panel.c +0 -0
index fa6831f8c004..ad80cca8c110 100644
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct
 intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
Quoted 8 lines

drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel *panel)

Quoted 4 lines
drivers/gpu/drm/i915/intel_panel.c +1 -1
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) ||
 HAS_PCH_ICP(dev_priv)) {

The commit message says reuse BXT, but the code says reuse CNP - which
one should it be?

well,
CNP is like BXT, but with only one controller.
ICP is like BXT, including 2 controllers.

I don't know if it makes more sense re-use the cnp or bxt functions

But one way or another we have to address these lines from cnp_setup:

/*
* CNP has the BXT implementation of backlight, but with only
* one controller. Future platforms could have multiple
controll\
ers

         * so let's make this extensible and prepared for the future.
         */
        panel->backlight.controller = 0;
Quoted 7 lines
Quoted 4 lines

My understanding is that we're only using one of the controllers on ICP on purpose, so we can perfectly reuse the CNP code.

But I'll let Anusha comment on this.

This is intentional. Commit message is trying to tell the similarity in backlight support. But we need to reuse CNP code ultimstely.

OK - in that case, the commit message needs to get less confusing, as it explicitly states that ICP is similar to BXT, and it explicitly states that v2 changed the commit to reuse BXT code, but the actual code is clearly using CNP code, and doesn't mention CNP (or the justification for using CNP) anywhere. :)

Maybe explain that we're using CNP code intentionally, even though it supports two BL controllers, and explain *why* we're ignoring the second BL controller? I'm still not sure why that is myself :)

Thanks!

-James

Quoted 17 lines

Regards,
Anusha

Quoted 14 lines
Quoted 14 lines
Quoted 14 lines
Quoted 13 lines
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.setup = cnp_setup_backlight;
drivers/gpu/drm/i915/intel_panel.c +0 -0
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable =

cnp_disable_backlight;
--
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Quoted 7 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 1 line
Anusha Srivatsa

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#16 lore raw

PATCH 6/8 drm/i915/icp: Add backlight Support for ICP

In reply to Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like BXT -, but we only use one controller for now, so we can just reuse the CNP code.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse CNP code since it is very similar.(Ville)
v3 (from Paulo): Rebase.
v4 (from Paulo): adjust commit message (James) and comment (Rodrigo).

---
 drivers/gpu/drm/i915/intel_panel.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_panel.c +4 -4
index fa6831f8c004..e702a6487aa9 100644
@@ -1719,9 +1719,9 @@ cnp_setup_backlight(struct intel_connector *connector, enum pipe unused)
 	u32 pwm_ctl, val;
 
 	/*
-	 * CNP has the BXT implementation of backlight, but with only
-	 * one controller. Future platforms could have multiple controllers
-	 * so let's make this extensible and prepared for the future.
+	 * CNP has the BXT implementation of backlight, but with only one
+	 * controller. TODO: ICP has multiple controllers but we only use
+	 * controller 0 for now.
 	 */
 	panel->backlight.controller = 0;
 
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) || HAS_PCH_ICP(dev_priv)) {
 		panel->backlight.setup = cnp_setup_backlight;
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable = cnp_disable_backlight;
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Acked-by on v1 6/8
#17 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

Quoted 12 lines · Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like BXT -, but we only use one controller for now, so we can just reuse the CNP code.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse CNP code since it is very similar.(Ville)
v3 (from Paulo): Rebase.
v4 (from Paulo): adjust commit message (James) and comment (Rodrigo).

Quoted 7 lines

Looks good, thanks!

Review

Quoted 6 lines
---
 drivers/gpu/drm/i915/intel_panel.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/intel_panel.c

drivers/gpu/drm/i915/intel_panel.c cnp_setup_backlight(struct intel_connector

Quoted 4 lines

index fa6831f8c004..e702a6487aa9 100644

drivers/gpu/drm/i915/intel_panel.c +0 -0
@@ -1719,9 +1719,9 @@ cnp_setup_backlight(struct intel_connector

*connector, enum pipe unused)

drivers/gpu/drm/i915/intel_panel.c cnp_setup_backlight(struct intel_connector *connector, enum pipe unused)

Quoted 5 lines
drivers/gpu/drm/i915/intel_panel.c +0 -2
        u32 pwm_ctl, val;
 
        /*
-        * CNP has the BXT implementation of backlight, but with only
-        * one controller. Future platforms could have multiple

controllers

drivers/gpu/drm/i915/intel_panel.c intel_panel_init_backlight_funcs(struct intel_panel

Quoted 8 lines
drivers/gpu/drm/i915/intel_panel.c +3 -1
-        * so let's make this extensible and prepared for the future.
+        * CNP has the BXT implementation of backlight, but with only one
+        * controller. TODO: ICP has multiple controllers but we only use
+        * controller 0 for now.
         */
        panel->backlight.controller = 0;
 
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct intel_panel

*panel)

Quoted 11 lines
drivers/gpu/drm/i915/intel_panel.c +1 -2
                panel->backlight.set = bxt_set_backlight;
                panel->backlight.get = bxt_get_backlight;
                panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-       } else if (HAS_PCH_CNP(dev_priv)) {
+       } else if (HAS_PCH_CNP(dev_priv) || HAS_PCH_ICP(dev_priv)) {
                panel->backlight.setup = cnp_setup_backlight;
                panel->backlight.enable = cnp_enable_backlight;
                panel->backlight.disable = cnp_disable_backlight;
--

2.14.3

--

James Ausmus

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer Acked-by on v1 6/8
#18 lore raw

Re: [PATCH 6/8] drm/i915/icp: Add backlight Support for ICP

In reply to Paulo Zanoni
Quoted 10 lines · Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

ICP has two backlight controllers - similar to previous platforms like BXT -, but we only use one controller for now, so we can just reuse the CNP code.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani) Reuse CNP code since it is very similar.(Ville)
v3 (from Paulo): Rebase.
v4 (from Paulo): adjust commit message (James) and comment (Rodrigo).

thanks
x

Quoted 41 lines
---
 drivers/gpu/drm/i915/intel_panel.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_panel.c +4 -4
index fa6831f8c004..e702a6487aa9 100644
@@ -1719,9 +1719,9 @@ cnp_setup_backlight(struct intel_connector *connector, enum pipe unused)
 	u32 pwm_ctl, val;
 
 	/*
-	 * CNP has the BXT implementation of backlight, but with only
-	 * one controller. Future platforms could have multiple controllers
-	 * so let's make this extensible and prepared for the future.
+	 * CNP has the BXT implementation of backlight, but with only one
+	 * controller. TODO: ICP has multiple controllers but we only use
+	 * controller 0 for now.
 	 */
 	panel->backlight.controller = 0;
 
@@ -1865,7 +1865,7 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)
 		panel->backlight.set = bxt_set_backlight;
 		panel->backlight.get = bxt_get_backlight;
 		panel->backlight.hz_to_pwm = bxt_hz_to_pwm;
-	} else if (HAS_PCH_CNP(dev_priv)) {
+	} else if (HAS_PCH_CNP(dev_priv) || HAS_PCH_ICP(dev_priv)) {
 		panel->backlight.setup = cnp_setup_backlight;
 		panel->backlight.enable = cnp_enable_backlight;
 		panel->backlight.disable = cnp_disable_backlight;
Signature · 1 line
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#19 lore raw

PATCH 7/8 drm/i915/icp: add ICP gmbus and gpio support

In reply to Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

In ICP, there are three TC ports and 3 DDI ports.

v2:
- Correct Pin mapping.
v3:
- Update pin mapping into per platform implementation rather than previous approach of port wise mapping.
v4:
- Update GMBUS_NUM_PINS (Paulo)
v5:
- rebase.
v6:
- Update function name, GMBUS_PIN_NUM (Paulo)
v7 (from Paulo):
- Make it apply.
v8 (from Paulo):
- Maintain consistent if ladder ordering.

Suggested by: Ville Syrjala <[email protected]>

---
 drivers/gpu/drm/i915/i915_reg.h   |  7 ++++++-
 drivers/gpu/drm/i915/intel_hdmi.c | 33 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_i2c.c  | 17 +++++++++++++++--
 3 files changed, 54 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +6 -1
index f756512041c6..698e1649f287 100644
@@ -3064,7 +3064,12 @@ enum i915_power_well_id {
 #define   GMBUS_PIN_2_BXT	2
 #define   GMBUS_PIN_3_BXT	3
 #define   GMBUS_PIN_4_CNP	4
-#define   GMBUS_NUM_PINS	7 /* including 0 */
+#define   GMBUS_PIN_9_TC1_ICP	9
+#define   GMBUS_PIN_10_TC2_ICP	10
+#define   GMBUS_PIN_11_TC3_ICP	11
+#define   GMBUS_PIN_12_TC4_ICP	12
+
+#define   GMBUS_NUM_PINS	13 /* including 0 */
 #define GMBUS1			_MMIO(dev_priv->gpio_mmio_base + 0x5104) /* command/status */
 #define   GMBUS_SW_CLR_INT	(1<<31)
 #define   GMBUS_SW_RDY		(1<<30)
drivers/gpu/drm/i915/intel_hdmi.c +33 -0
index 691f15b59124..d3212afe1eba 100644
@@ -2183,6 +2183,37 @@ static u8 cnp_port_to_ddc_pin(struct drm_i915_private *dev_priv,
 	return ddc_pin;
 }
 
+static u8 icl_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
+{
+	u8 ddc_pin;
+
+	switch (port) {
+	case PORT_A:
+		ddc_pin = GMBUS_PIN_1_BXT;
+		break;
+	case PORT_B:
+		ddc_pin = GMBUS_PIN_2_BXT;
+		break;
+	case PORT_C:
+		ddc_pin = GMBUS_PIN_9_TC1_ICP;
+		break;
+	case PORT_D:
+		ddc_pin = GMBUS_PIN_10_TC2_ICP;
+		break;
+	case PORT_E:
+		ddc_pin = GMBUS_PIN_11_TC3_ICP;
+		break;
+	case PORT_F:
+		ddc_pin = GMBUS_PIN_12_TC4_ICP;
+		break;
+	default:
+		MISSING_CASE(port);
+		ddc_pin = GMBUS_PIN_2_BXT;
+		break;
+	}
+	return ddc_pin;
+}
+
 static u8 g4x_port_to_ddc_pin(struct drm_i915_private *dev_priv,
 			      enum port port)
 {
@@ -2225,6 +2256,8 @@ static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv,
 		ddc_pin = bxt_port_to_ddc_pin(dev_priv, port);
 	else if (HAS_PCH_CNP(dev_priv))
 		ddc_pin = cnp_port_to_ddc_pin(dev_priv, port);
+	else if (IS_ICELAKE(dev_priv))
+		ddc_pin = icl_port_to_ddc_pin(dev_priv, port);
 	else
 		ddc_pin = g4x_port_to_ddc_pin(dev_priv, port);
 
drivers/gpu/drm/i915/intel_i2c.c +15 -2
index 6f7ef4e225ee..e6875509bcd9 100644
@@ -76,11 +76,22 @@ static const struct gmbus_pin gmbus_pins_cnp[] = {
 	[GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
 };
 
+static const struct gmbus_pin gmbus_pins_icp[] = {
+	[GMBUS_PIN_1_BXT] = { "dpa", GPIOA },
+	[GMBUS_PIN_2_BXT] = { "dpb", GPIOB },
+	[GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOC },
+	[GMBUS_PIN_10_TC2_ICP] = { "tc2", GPIOD },
+	[GMBUS_PIN_11_TC3_ICP] = { "tc3", GPIOE },
+	[GMBUS_PIN_12_TC4_ICP] = { "tc4", GPIOF },
+};
+
 /* pin is expected to be valid */
 static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv,
 					     unsigned int pin)
 {
-	if (HAS_PCH_CNP(dev_priv))
+	if (HAS_PCH_ICP(dev_priv))
+		return &gmbus_pins_icp[pin];
+	else if (HAS_PCH_CNP(dev_priv))
 		return &gmbus_pins_cnp[pin];
 	else if (IS_GEN9_LP(dev_priv))
 		return &gmbus_pins_bxt[pin];
@@ -97,7 +108,9 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
 {
 	unsigned int size;
 
-	if (HAS_PCH_CNP(dev_priv))
+	if (HAS_PCH_ICP(dev_priv))
+		size = ARRAY_SIZE(gmbus_pins_icp);
+	else if (HAS_PCH_CNP(dev_priv))
 		size = ARRAY_SIZE(gmbus_pins_cnp);
 	else if (IS_GEN9_LP(dev_priv))
 		size = ARRAY_SIZE(gmbus_pins_bxt);
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#20 lore raw

PATCH 8/8 drm/i915/icp: Add the ID for ICL PCH - ICP

In reply to Paulo Zanoni

From: Anusha Srivatsa <[email protected]>

Add the PCI ID for the ICL PCH - ICP.

v2: rebased.
v3: rebased.
v4: fix ICP name.
v5: fix the ID mask (Fei Li).
v6 (from Paulo): bikesheds.

---
 drivers/gpu/drm/i915/i915_drv.c | 4 ++++
 drivers/gpu/drm/i915/i915_drv.h | 1 +
 2 files changed, 5 insertions(+)
drivers/gpu/drm/i915/i915_drv.c +4 -0
index 6c8da9d20c33..95071a1e875b 100644
@@ -252,6 +252,10 @@ static void intel_detect_pch(struct drm_i915_private *dev_priv)
 				DRM_DEBUG_KMS("Found Cannon Lake LP PCH (CNP-LP)\n");
 				WARN_ON(!IS_CANNONLAKE(dev_priv) &&
 					!IS_COFFEELAKE(dev_priv));
+			} else if (id == INTEL_PCH_ICP_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_ICP;
+				DRM_DEBUG_KMS("Found Ice Lake PCH\n");
+				WARN_ON(!IS_ICELAKE(dev_priv));
 			} else if (id == INTEL_PCH_P2X_DEVICE_ID_TYPE ||
 				   id == INTEL_PCH_P3X_DEVICE_ID_TYPE ||
 				   (id == INTEL_PCH_QEMU_DEVICE_ID_TYPE &&
drivers/gpu/drm/i915/i915_drv.h +1 -0
index 482517af58f6..e0c6f1f4bafd 100644
@@ -2846,6 +2846,7 @@ intel_info(const struct drm_i915_private *dev_priv)
 #define INTEL_PCH_KBP_DEVICE_ID_TYPE		0xA280
 #define INTEL_PCH_CNP_DEVICE_ID_TYPE		0xA300
 #define INTEL_PCH_CNP_LP_DEVICE_ID_TYPE		0x9D80
+#define INTEL_PCH_ICP_DEVICE_ID_TYPE		0x3480
 #define INTEL_PCH_P2X_DEVICE_ID_TYPE		0x7100
 #define INTEL_PCH_P3X_DEVICE_ID_TYPE		0x7000
 #define INTEL_PCH_QEMU_DEVICE_ID_TYPE		0x2900 /* qemu q35 has 2918 */
Signature · 6 lines
2.14.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#21 lore raw

✓ Fi.CI.BAT: success for ICP initial support

In reply to Paulo Zanoni
== Series Details ==

== Series Details ==

Series: ICP initial support
URL : https://patchwork.freedesktop.org/series/36350/
State : success

== Summary ==

Series 36350v1 ICP initial support
https://patchwork.freedesktop.org/api/1.0/series/36350/revisions/1/mbox/

Test debugfs_test:

        Subgroup read_all_entries:
                fail       -> PASS       (fi-elk-e7500) fdo#103989
                incomplete -> PASS       (fi-snb-2520m) fdo#103713
Test gem_mmap_gtt:
        Subgroup basic-small-bo-tiledx:
                fail       -> PASS       (fi-gdg-551) fdo#102575

fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:419s
fi-bdw-gvtdvm    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:425s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:373s
fi-bsw-n3050     total:288  pass:242  dwarn:0   dfail:0   fail:0   skip:46  time:491s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:280s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:481s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:486s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:466s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:452s
fi-elk-e7500     total:224  pass:168  dwarn:10  dfail:0   fail:0   skip:45 
fi-gdg-551       total:288  pass:180  dwarn:0   dfail:0   fail:0   skip:108 time:271s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:513s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:390s
fi-hsw-4770r     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:401s
fi-ilk-650       total:288  pass:228  dwarn:0   dfail:0   fail:0   skip:60  time:411s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:460s
fi-ivb-3770      total:288  pass:255  dwarn:0   dfail:0   fail:0   skip:33  time:411s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:467s
fi-kbl-7560u     total:288  pass:269  dwarn:0   dfail:0   fail:0   skip:19  time:499s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:451s
fi-kbl-r         total:288  pass:260  dwarn:1   dfail:0   fail:0   skip:27  time:503s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:581s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:429s
fi-skl-6600u     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:510s
fi-skl-6700hq    total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:532s
fi-skl-6700k2    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:494s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:480s
fi-skl-gvtdvm    total:288  pass:265  dwarn:0   dfail:0   fail:0   skip:23  time:432s
fi-snb-2520m     total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:530s
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:395s
Blacklisted hosts:
fi-cfl-s2        total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:568s
fi-glk-dsi       total:288  pass:257  dwarn:0   dfail:0   fail:1   skip:30  time:487s

fi-cnl-y2 failed to collect. IGT log at Patchwork_7652/fi-cnl-y2/igt.log

dbc7615897f6cbe121a316b4209b278407cb2eb4 drm-tip: 2018y-01m-11d-16h-49m-38s UTC integration manifest 2fe9e815bb0b drm/i915/icp: Add the ID for ICL PCH - ICP
a44a57cf52df drm/i915/icp: add ICP gmbus and gpio support
5c79b9a3856e drm/i915/icp: Add backlight Support for ICP
8dd9bdee33e6 drm/i915/icp: Add Panel Power Sequencing Support
4b221f1e5a65 drm/i915/icp: Get/set proper Raw clock frequency on ICP
05c7311d391a drm/i915/icp: Introduce Ice Lake PCH
09ae110fc4bb drm/i915/icl: Add initial Icelake definitions.
71e6a3f6aa93 drm/i915/cnl: Add Port F definition.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7652/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#22 lore raw

✓ Fi.CI.IGT: success for ICP initial support

In reply to Paulo Zanoni
== Series Details ==

== Series Details ==

Series: ICP initial support
URL : https://patchwork.freedesktop.org/series/36350/
State : success

== Summary ==

Test kms_atomic_transition:

        Subgroup plane-all-modeset-transition-fencing:
                dmesg-warn -> PASS       (shard-hsw) fdo#102614 +1
Test gem_tiled_swapping:
        Subgroup non-threaded:
                pass       -> INCOMPLETE (shard-snb) fdo#104218 +1
Test kms_flip:
        Subgroup flip-vs-panning-vs-hang:
                dmesg-warn -> PASS       (shard-snb) fdo#103821
Test gem_eio:
        Subgroup in-flight:
                dmesg-warn -> PASS       (shard-snb) fdo#104058

fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#104218 https://bugs.freedesktop.org/show_bug.cgi?id=104218
fdo#103821 https://bugs.freedesktop.org/show_bug.cgi?id=103821
fdo#104058 https://bugs.freedesktop.org/show_bug.cgi?id=104058

shard-hsw        total:2643 pass:1497 dwarn:2   dfail:0   fail:6   skip:1137 time:8871s
shard-snb        total:2643 pass:1273 dwarn:1   dfail:0   fail:8   skip:1360 time:7722s
Blacklisted hosts:
shard-apl        total:2691 pass:1664 dwarn:1   dfail:0   fail:23  skip:1001 time:13133s
shard-kbl        total:2709 pass:1807 dwarn:1   dfail:0   fail:23  skip:877 time:10316s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7652/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#23 lore raw

✓ Fi.CI.BAT: success for ICP initial support (rev2)

In reply to Paulo Zanoni
== Series Details ==

== Series Details ==

Series: ICP initial support (rev2)
URL : https://patchwork.freedesktop.org/series/36350/
State : success

== Summary ==

Series 36350v2 ICP initial support
https://patchwork.freedesktop.org/api/1.0/series/36350/revisions/2/mbox/

Test debugfs_test:

        Subgroup read_all_entries:
                dmesg-fail -> PASS       (fi-elk-e7500) fdo#103989 +2

fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989

fi-bdw-5557u     total:288  pass:267  dwarn:0   dfail:0   fail:0   skip:21  time:426s
fi-bdw-gvtdvm    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:443s
fi-blb-e6850     total:288  pass:223  dwarn:1   dfail:0   fail:0   skip:64  time:383s
fi-bsw-n3050     total:288  pass:242  dwarn:0   dfail:0   fail:0   skip:46  time:524s
fi-bwr-2160      total:288  pass:183  dwarn:0   dfail:0   fail:0   skip:105 time:293s
fi-bxt-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:500s
fi-bxt-j4205     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:502s
fi-byt-j1900     total:288  pass:253  dwarn:0   dfail:0   fail:0   skip:35  time:494s
fi-byt-n2820     total:288  pass:249  dwarn:0   dfail:0   fail:0   skip:39  time:480s
fi-elk-e7500     total:224  pass:168  dwarn:10  dfail:0   fail:0   skip:45 
fi-gdg-551       total:288  pass:179  dwarn:0   dfail:0   fail:1   skip:108 time:306s
fi-glk-1         total:288  pass:260  dwarn:0   dfail:0   fail:0   skip:28  time:528s
fi-hsw-4770      total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:396s
fi-hsw-4770r     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:406s
fi-ilk-650       total:288  pass:228  dwarn:0   dfail:0   fail:0   skip:60  time:426s
fi-ivb-3520m     total:288  pass:259  dwarn:0   dfail:0   fail:0   skip:29  time:462s
fi-ivb-3770      total:288  pass:255  dwarn:0   dfail:0   fail:0   skip:33  time:421s
fi-kbl-7500u     total:288  pass:263  dwarn:1   dfail:0   fail:0   skip:24  time:465s
fi-kbl-7560u     total:288  pass:269  dwarn:0   dfail:0   fail:0   skip:19  time:504s
fi-kbl-7567u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:461s
fi-kbl-r         total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:512s
fi-pnv-d510      total:288  pass:222  dwarn:1   dfail:0   fail:0   skip:65  time:641s
fi-skl-6260u     total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:435s
fi-skl-6600u     total:288  pass:261  dwarn:0   dfail:0   fail:0   skip:27  time:524s
fi-skl-6700hq    total:288  pass:262  dwarn:0   dfail:0   fail:0   skip:26  time:536s
fi-skl-6700k2    total:288  pass:264  dwarn:0   dfail:0   fail:0   skip:24  time:493s
fi-skl-6770hq    total:288  pass:268  dwarn:0   dfail:0   fail:0   skip:20  time:505s
fi-snb-2520m     total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:542s
fi-snb-2600      total:288  pass:248  dwarn:0   dfail:0   fail:0   skip:40  time:409s
Blacklisted hosts:
fi-cfl-s2        total:288  pass:256  dwarn:0   dfail:0   fail:3   skip:26  time:568s
fi-glk-dsi       total:288  pass:258  dwarn:0   dfail:0   fail:0   skip:30  time:490s
fi-skl-guc       total:288  pass:221  dwarn:39  dfail:0   fail:0   skip:28  time:419s

a0584e868ec718af8a385cbae61fee0b25bdfd22 drm-tip: 2018y-01m-19d-18h-21m-15s UTC integration manifest fab9e398bf3d drm/i915/icp: Add the ID for ICL PCH - ICP
9ad3e0909344 drm/i915/icp: add ICP gmbus and gpio support
af6b3f70f539 drm/i915/icp: Add backlight Support for ICP
d71632a5960b drm/i915/icp: Add Panel Power Sequencing Support
428295d9ce61 drm/i915/icp: Get/set proper Raw clock frequency on ICP
8d623eefe66c drm/i915/icp: Introduce Ice Lake PCH
13193af7921c drm/i915/icl: Add initial Icelake definitions.
affa7c0aee2a drm/i915/cnl: Add Port F definition.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7728/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#24 lore raw
In reply to Paulo Zanoni

Em Qui, 2018-01-11 às 16:00 -0200, Paulo Zanoni escreveu:

Quoted 18 lines

Hi

This series adds the initial support for ICP. No conflicts with the other
series. Patches 1 and 2 are parts of other series that we've already been
discussing on this mailing list, but I put them here so CI can do the right
thing.

I have just re-reviewed all of Anusha's patches and my reviewed-by tags still
stand, which means every patch on this series has a r-b tag. I'll let the series
sit on the mailing list for a while before merging, just in case someone else
has something to say.

Quoted 5 lines

The one thing missing for complete ICP support is the patch that adds the
interrupts, but that requires code from other series (including the GEM one
currently under review), so it will be sent later.

Series merged. Thanks everybody for the help.

Quoted 26 lines

Thanks,
Paulo

Anusha Srivatsa (6):
drm/i915/icp: Introduce Ice Lake PCH drm/i915/icp: Get/set proper Raw clock frequency on ICP drm/i915/icp: Add Panel Power Sequencing Support drm/i915/icp: Add backlight Support for ICP drm/i915/icp: add ICP gmbus and gpio support drm/i915/icp: Add the ID for ICL PCH - ICP

Rodrigo Vivi (2):
drm/i915/cnl: Add Port F definition.
drm/i915/icl: Add initial Icelake definitions.

 drivers/gpu/drm/i915/i915_drv.c          |  4 ++++
 drivers/gpu/drm/i915/i915_drv.h          |  5 +++++
 drivers/gpu/drm/i915/i915_pci.c          | 13 +++++++++++++
 drivers/gpu/drm/i915/i915_reg.h          |  9 ++++++++-
 drivers/gpu/drm/i915/intel_bios.c        |  9 +++++++++
 drivers/gpu/drm/i915/intel_cdclk.c       | 29
++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_device_info.c |  1 +
 drivers/gpu/drm/i915/intel_device_info.h |  2 ++
 drivers/gpu/drm/i915/intel_display.h     |  1 +
Quoted 9 lines
 drivers/gpu/drm/i915/intel_dp.c          | 20 +++++++++++++------
 drivers/gpu/drm/i915/intel_hdmi.c        | 33
++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_i2c.c         | 17 ++++++++++++++--
 drivers/gpu/drm/i915/intel_panel.c       |  2 +-
 drivers/gpu/drm/i915/intel_vbt_defs.h    |  2 ++
 include/drm/i915_component.h             |  3 +--
 15 files changed, 136 insertions(+), 14 deletions(-)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#25 lore raw

✓ Fi.CI.IGT: success for ICP initial support (rev2)

In reply to Paulo Zanoni
== Series Details ==

== Series Details ==

Series: ICP initial support (rev2)
URL : https://patchwork.freedesktop.org/series/36350/
State : success

== Summary ==

Test kms_flip:

        Subgroup 2x-vblank-vs-dpms-suspend:
                skip       -> PASS       (shard-hsw)
        Subgroup plain-flip-fb-recreate:
                fail       -> PASS       (shard-apl) fdo#100368
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-offscren-pri-shrfb-draw-blt:
                fail       -> PASS       (shard-snb) fdo#101623
Test perf:
        Subgroup enable-disable:
                fail       -> PASS       (shard-apl) fdo#103715
        Subgroup oa-exponents:
                pass       -> FAIL       (shard-apl) fdo#102254
        Subgroup buffer-fill:
                fail       -> PASS       (shard-apl) fdo#103755
Test gem_tiled_swapping:
        Subgroup non-threaded:
                incomplete -> PASS       (shard-hsw) fdo#104218
Test testdisplay:
                dmesg-warn -> PASS       (shard-apl)

fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#103715 https://bugs.freedesktop.org/show_bug.cgi?id=103715
fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#103755 https://bugs.freedesktop.org/show_bug.cgi?id=103755
fdo#104218 https://bugs.freedesktop.org/show_bug.cgi?id=104218

shard-apl        total:2780 pass:1716 dwarn:1   dfail:0   fail:23  skip:1040 time:14777s
shard-hsw        total:2780 pass:1724 dwarn:1   dfail:0   fail:12  skip:1042 time:15636s
shard-snb        total:2780 pass:1316 dwarn:1   dfail:0   fail:13  skip:1450 time:8066s

Blacklisted hosts:
shard-kbl total:2702 pass:1777 dwarn:1 dfail:0 fail:24 skip:900 time:10707s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7728/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx