m68k: Drop unreferenced CONFIG_* defines
PATCH 1/1 m68k: Drop unreferenced CONFIG_* defines
The following config symbols are only defined once and never referenced anywhere else:
CONFIG_AMCORECONFIG_ASTRO5373LCONFIG_M52277EVBCONFIG_M5253DEMOCONFIG_M5253EVBECONFIG_M5275EVBCONFIG_M54418TWRCONFIG_STMARK2
Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point.
--- board/freescale/m52277evb/README | 1 - board/freescale/m5253evbe/README | 1 - doc/README.m54418twr | 1 - include/configs/M52277EVB.h | 1 - include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5275EVB.h | 1 - include/configs/M54418TWR.h | 1 - include/configs/amcore.h | 1 - include/configs/astro_mcf5373l.h | 2 -- include/configs/stmark2.h | 1 - scripts/config_whitelist.txt | 8 -------- 12 files changed, 22 deletions(-)
board/freescale/m52277evb/README +0 -1
@@ -67,7 +67,6 @@ Changed files: 1.2 Configuration settings for M52277EVB Development Board CONFIG_MCF5227x -- define for all MCF5227x CPUs CONFIG_M52277 -- define for all Freescale MCF52277 CPUs -CONFIG_M52277EVB -- define for M52277EVB board CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
board/freescale/m5253evbe/README +0 -1
@@ -27,7 +27,6 @@ Created 06/05/2007 3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h CONFIG_MCF52x2 Processor family CONFIG_MCF5253 MCF5253 specific - CONFIG_M5253EVBE Amadeus Plus board specific CONFIG_SYS_CLK Define Amadeus Plus CPU Clock CONFIG_SYS_MBAR MBAR base address CONFIG_SYS_MBAR2 MBAR2 base address
doc/README.m54418twr +0 -1
@@ -63,7 +63,6 @@ Changed files: 1.2 Configuration settings for M54418TWR Development Board CONFIG_MCF5441x -- define for all MCF5441x CPUs CONFIG_M54418 -- define for all Freescale MCF54418 CPUs -CONFIG_M54418TWR -- define for M54418TWR board CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
include/configs/M52277EVB.h +0 -1
@@ -18,7 +18,6 @@* High Level Configuration Options * (easy to change) */ -#define CONFIG_M52277EVB /* M52277EVB board */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0)
include/configs/M5253DEMO.h +0 -2
@@ -7,8 +7,6 @@#ifndef _M5253DEMO_H#define _M5253DEMO_H -#define CONFIG_M5253DEMO /* define board type */ -#define CONFIG_MCFTMR #define CONFIG_MCFUART
include/configs/M5253EVBE.h +0 -2
@@ -8,8 +8,6 @@#ifndef _M5253EVBE_H#define _M5253EVBE_H -#define CONFIG_M5253EVBE /* define board type */ -#define CONFIG_MCFTMR #define CONFIG_MCFUART
include/configs/M5275EVB.h +0 -1
@@ -21,7 +21,6 @@* High Level Configuration Options * (easy to change) */ -#define CONFIG_M5275EVB /* define board type */ #define CONFIG_MCFTMR
include/configs/M54418TWR.h +0 -1
@@ -18,7 +18,6 @@* High Level Configuration Options * (easy to change) */ -#define CONFIG_M54418TWR /* M54418TWR board */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0)
include/configs/amcore.h +0 -1
@@ -9,7 +9,6 @@#ifndef __AMCORE_CONFIG_H#define __AMCORE_CONFIG_H -#define CONFIG_AMCORE #define CONFIG_HOSTNAME AMCORE#define CONFIG_MCFTMR
include/configs/astro_mcf5373l.h +0 -2
@@ -39,8 +39,6 @@#error No card type defined!#endif -#define CONFIG_ASTRO5373L /* define board type */ -/* Command line configuration */ /* * CONFIG_RAM defines if u-boot is loaded via BDM (or started from
include/configs/stmark2.h +0 -1
@@ -9,7 +9,6 @@#ifndef __STMARK2_CONFIG_H#define __STMARK2_CONFIG_H -#define CONFIG_STMARK2 #define CONFIG_HOSTNAME stmark2#define CONFIG_MCFUART
scripts/config_whitelist.txt +0 -8
@@ -29,7 +29,6 @@ CONFIG_AM335X_USB0_MODE CONFIG_AM335X_USB1 CONFIG_AM335X_USB1_MODE CONFIG_AM437X_USB2PHY2_HOST -CONFIG_AMCORE CONFIG_ANDES_PCU CONFIG_ANDES_PCU_BASE CONFIG_APBH_DMA
@@ -71,7 +70,6 @@ CONFIG_ARM_PL180_MMCI_BASE CONFIG_ARM_PL180_MMCI_CLOCK_FREQ CONFIG_ARM_THUMB CONFIG_ARP_TIMEOUT -CONFIG_ASTRO5373L CONFIG_ASTRO_COFDMDUOS2 CONFIG_ASTRO_TWIN7S2 CONFIG_ASTRO_V512
@@ -1263,12 +1261,7 @@ CONFIG_LSXHL CONFIG_LYNXKDI CONFIG_M41T94_SPI_CS CONFIG_M520x -CONFIG_M52277EVB -CONFIG_M5253DEMO -CONFIG_M5253EVBE -CONFIG_M5275EVB CONFIG_M5301x -CONFIG_M54418TWR CONFIG_M54451EVB CONFIG_M54455EVB CONFIG_MACB0_PHY
@@ -2133,7 +2126,6 @@ CONFIG_STM32_GPIO CONFIG_STM32_HSE_HZ CONFIG_STM32_HZ CONFIG_STM32_SERIAL -CONFIG_STMARK2 CONFIG_STRIDER CONFIG_STRIDER_CON CONFIG_STRIDER_CON_DP
Signature · 1 line
2.15.0
Quoted 12 lines · Tuomas Tynkkynen
The following config symbols are only defined once and never referenced anywhere else:
CONFIG_AMCORECONFIG_ASTRO5373LCONFIG_M52277EVBCONFIG_M5253DEMOCONFIG_M5253EVBECONFIG_M5275EVBCONFIG_M54418TWRCONFIG_STMARK2
Quoted 4 lines
Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point.
Signed-off-by Tuomas Tynkkynen <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180119/57df7d13/attachment.sig>