mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
PATCH v2 1/1 mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Commit 4f425280fa71 ("mmc: fsl_esdhc: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode on i.MX, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53.
Fix this issue by changing the minimum prescaler value for the single instance of the i.MX53 eSDHCv3 controller.
---
Changes for v2:
- Surround == with parentheses for clarity (suggested by Stefano).
--- drivers/mmc/fsl_esdhc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/mmc/fsl_esdhc.c +6 -1
@@ -528,14 +528,19 @@ out:static void set_sysctl (struct fsl_esdhc_priv *priv,struct mmc *mmc,uint clock) { +struct fsl_esdhc *regs = priv->esdhc_regs;int div =1 ;#ifdef ARCH_MXC +#ifdef CONFIG_MX53 +/* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */ +int pre_div = (regs == (struct fsl_esdhc *)MMC_SDHC3_BASE_ADDR ) ?2 :1 ; +#else int pre_div =1 ; +#endif #else int pre_div =2 ;#endif int ddr_pre_div = mmc->ddr_mode ?2 :1 ; -struct fsl_esdhc *regs = priv->esdhc_regs;int sdhc_clk = priv->sdhc_clk;uint clk;
Signature · 1 line
2.14.1
PATCH v2 1/1 mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Quoted 8 lines · Benoît Thébaudeau
Commit
4f425280fa71("mmc:fsl_esdhc: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode on i.MX, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53.
Quoted 5 lines
Fix this issue by changing the minimum prescaler value for the single instance of the i.MX53 eSDHCv3 controller.
Signed-off-by Benoît Thébaudeau <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-mmc. Thanks!
Best Regards,
Jaehoon Chung
Quoted 33 lines
---
Changes for v2:
- Surround == with parentheses for clarity (suggested by Stefano).--- drivers/mmc/fsl_esdhc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)drivers/mmc/fsl_esdhc.c +6
-1@@ -528,14 +528,19 @@ out:static void set_sysctl (struct fsl_esdhc_priv *priv,struct mmc *mmc,uint clock) { +struct fsl_esdhc *regs = priv->esdhc_regs;int div =1 ;#ifdef ARCH_MXC +#ifdef CONFIG_MX53 +/* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */ +int pre_div = (regs == (struct fsl_esdhc *)MMC_SDHC3_BASE_ADDR ) ?2 :1 ; +#else int pre_div =1 ; +#endif #else int pre_div =2 ;#endif int ddr_pre_div = mmc->ddr_mode ?2 :1 ; -struct fsl_esdhc *regs = priv->esdhc_regs;int sdhc_clk = priv->sdhc_clk;uint clk;