Skip to contentSkip to conversation

Documentation: rapidio: move sysfs interface to ABI

PATCH Applied Aishwarya Pant 3 participants 3 messages Jan 19, 2018 – Feb 23, 2018 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Documentation: rapidio: move sysfs interface to ABI

Right now, the description of the rapidio sysfs interfaces is in Documentation/rapidio/sysfs.txt. Since these are a part of the ABI, they should be in Documentation/ABI along with the rest.

---
Movement of sysfs interface is not absolutely necessary but this format adds some metadata (like kernel version, added date) which might be useful in scripting and tracking changes.

Changes in v2:
-Fix typo typr -> typo
-Add context around enumerating devices' destid
-Add destid attribute to list of common attributes
-Edit description of binary attribute config
-Add a line in Documentation/rapidio/sysfs.txt about movement of the
sysfs ABI

 Documentation/ABI/testing/sysfs-bus-rapidio   | 198 ++++++++++++++++++++++++++
 Documentation/ABI/testing/sysfs-class-rapidio |  55 +++++++
 Documentation/rapidio/sysfs.txt               | 161 +--------------------
 3 files changed, 256 insertions(+), 158 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-rapidio
 create mode 100644 Documentation/ABI/testing/sysfs-class-rapidio
Documentation/ABI/testing/sysfs-bus-rapidio new file +198 -0
new file mode 100644
index 000000000000..13208b27dd87
@@ -0,0 +1,198 @@
+What:		/sys/bus/rapidio/devices/nn:d:iiii
+Description:
+		For each RapidIO device, the RapidIO subsystem creates files in
+		an individual subdirectory with the following name format of
+		device_name "nn:d:iiii", where:
+
+		nn   - two-digit hexadecimal ID of RapidIO network where the
+		       device resides
+		d    - device type: 'e' - for endpoint or 's' - for switch
+		iiii - four-digit device destID for endpoints, or switchID for
+		       switches
+
+		For example, below is a list of device directories that
+		represents a typical RapidIO network with one switch, one host,
+		and two agent endpoints, as it is seen by the enumerating host
+		(with destID = 1):
+
+		/sys/bus/rapidio/devices/00:e:0000
+		/sys/bus/rapidio/devices/00:e:0002
+		/sys/bus/rapidio/devices/00:s:0001
+
+		NOTE: An enumerating or discovering endpoint does not create a
+		sysfs entry for itself, this is why an endpoint with destID=1 is
+		not shown in the list.
+
+Attributes Common for All RapidIO Devices
+-----------------------------------------
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/did
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device identifier
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/vid
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device vendor identifier
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/device_rev
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device revision level
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_did
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns identifier for the assembly containing the device
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_rev
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns revision level of the assembly containing the
+		device
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_vid
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns vendor identifier of the assembly containing the
+		device
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/destid
+Date:		Mar, 2011
+KernelVersion:	v2.6.3
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns device destination ID assigned by the enumeration
+		routine
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/lprev
+Date:		Mar, 2011
+KernelVersion:	v2.6.39
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns name of previous device (switch) on the path to the
+		device that that owns this attribute
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/modalias
+Date:		Jul, 2013
+KernelVersion:	v3.11
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device modalias
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/config
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RW) Binary attribute to read from and write to the device
+		configuration registers using the RapidIO maintenance
+		transactions. This attribute is similar in behaviour to the
+		"config" attribute of PCI devices and provides an access to the
+		RapidIO device registers using standard file read and write
+		operations.
+
+RapidIO Switch Device Attributes
+--------------------------------
+
+RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports
+common and device-specific sysfs attributes for switches. Because switches are
+integrated into the RapidIO subsystem, it offers a method to create
+device-specific sysfs attributes by specifying a callback function that may be
+set by the switch initialization routine during enumeration or discovery
+process.
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/routes
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) reports switch routing information in "destID port" format.
+		This attribute reports only valid routing table entries, one
+		line for each entry.
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/destid
+Date:		Mar, 2011
+KernelVersion:	v2.6.3
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) device destination ID of the associated device that defines
+		a route to the switch
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/hopcount
+Date:		Mar, 2011
+KernelVersion:	v2.6.39
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) number of hops on the path to the switch
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/lnext
+Date:		Mar, 2011
+KernelVersion:	v2.6.39
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns names of devices linked to the switch except one of
+		a device linked to the ingress port (reported as "lprev"). This
+		is an array names with number of lines equal to number of ports
+		in switch. If a switch port has no attached device, returns
+		"null" instead of a device name.
+
+Device-specific Switch Attributes
+---------------------------------
+
+IDT_GEN2-
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/errlog
+Date:		Oct, 2010
+KernelVersion:	v2.6.37
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) reads contents of device error log until it is empty.
+
+RapidIO Bus Attributes
+----------------------
+
+What:		/sys/bus/rapidio/scan
+Date:		May, 2013
+KernelVersion:	v3.11
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(WO) Allows to trigger enumeration discovery process from user
+		space. To initiate an enumeration or discovery process on
+		specific mport device, a user needs to write mport_ID (not
+		RapidIO destination ID) into this file. The mport_ID is a
+		sequential number (0 ...  RIO_MAX_MPORTS) assigned to the mport
+		device. For example, for a machine with a single RapidIO
+		controller, mport_ID for that controller always will be 0. To
+		initiate RapidIO enumeration/discovery on all available mports a
+		user must write '-1' (or RIO_MPORT_ANY) into this attribute
+		file.
Documentation/ABI/testing/sysfs-class-rapidio new file +55 -0

55 lines not on this page · raw message

Documentation/rapidio/sysfs.txt +3 -158

161 lines not on this page · raw message

Signature · 1 line
2.16.0
Acked-by on v2 1/1
#1 lore raw

Sorry for the delay.

Quoted 517 lines

-----Original Message-----
From: Aishwarya Pant [mailto:[email protected]]
Sent: Friday, January 19, 2018 7:32 AM
To: Matt Porter <[email protected]>; Bounine, Alexandre <[email protected]>; Jonathan Corbet <[email protected]>; Greg KH <[email protected]>; [email protected]; linux- [email protected]
Cc: Julia Lawall <[email protected]>
Subject: [PATCH v2] Documentation: rapidio: move sysfs interface to ABI

Right now, the description of the rapidio sysfs interfaces is in Documentation/rapidio/sysfs.txt. Since these are a part of the ABI, they should be in Documentation/ABI along with the rest.

---
Movement of sysfs interface is not absolutely necessary but this format adds some metadata (like kernel version, added date) which might be useful in scripting and tracking changes.

Changes in v2:

(quoted diff) +1 -5
-Fix typo typr -> typo
-Add context around enumerating devices' destid
-Add destid attribute to list of common attributes
-Edit description of binary attribute config
-Add a line in Documentation/rapidio/sysfs.txt about movement of the
 sysfs ABI
 
 Documentation/ABI/testing/sysfs-bus-rapidio   | 198
++++++++++++++++++++++++++
 Documentation/ABI/testing/sysfs-class-rapidio |  55 +++++++
 Documentation/rapidio/sysfs.txt               | 161 +--------------------
 3 files changed, 256 insertions(+), 158 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-rapidio
 create mode 100644 Documentation/ABI/testing/sysfs-class-rapidio
Documentation/ABI/testing/sysfs-bus-rapidio new file +3 -0
new file mode 100644
index 000000000000..13208b27dd87
@@ -0,0 +1,198 @@
+What:		/sys/bus/rapidio/devices/nn:d:iiii
+Description:
+		For each RapidIO device, the RapidIO subsystem creates files

in

Documentation/ABI/testing/sysfs-bus-rapidio new file +11 -0
+		an individual subdirectory with the following name format of
+		device_name "nn:d:iiii", where:
+
+		nn   - two-digit hexadecimal ID of RapidIO network where the
+		       device resides
+		d    - device type: 'e' - for endpoint or 's' - for switch
+		iiii - four-digit device destID for endpoints, or switchID for
+		       switches
+
+		For example, below is a list of device directories that
+		represents a typical RapidIO network with one switch, one

host,

Documentation/ABI/testing/sysfs-bus-rapidio new file +1 -0
+		and two agent endpoints, as it is seen by the enumerating

host

Documentation/ABI/testing/sysfs-bus-rapidio new file +7 -0
+		(with destID = 1):
+
+		/sys/bus/rapidio/devices/00:e:0000
+		/sys/bus/rapidio/devices/00:e:0002
+		/sys/bus/rapidio/devices/00:s:0001
+
+		NOTE: An enumerating or discovering endpoint does not

create a

Documentation/ABI/testing/sysfs-bus-rapidio new file +63 -0
+		sysfs entry for itself, this is why an endpoint with destID=1 is
+		not shown in the list.
+
+Attributes Common for All RapidIO Devices
+-----------------------------------------
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/did
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device identifier
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/vid
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device vendor identifier
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/device_rev
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device revision level
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_did
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns identifier for the assembly containing the device
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_rev
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns revision level of the assembly containing the
+		device
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_vid
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns vendor identifier of the assembly containing the
+		device
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/destid
+Date:		Mar, 2011
+KernelVersion:	v2.6.3
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns device destination ID assigned by the

enumeration

Documentation/ABI/testing/sysfs-bus-rapidio new file +9 -0
+		routine
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/lprev
+Date:		Mar, 2011
+KernelVersion:	v2.6.39
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns name of previous device (switch) on the path to

the

Documentation/ABI/testing/sysfs-bus-rapidio new file +20 -0
+		device that that owns this attribute
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/modalias
+Date:		Jul, 2013
+KernelVersion:	v3.11
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns the device modalias
+
+What:		/sys/bus/rapidio/devices/nn:d:iiii/config
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RW) Binary attribute to read from and write to the device
+		configuration registers using the RapidIO maintenance
+		transactions. This attribute is similar in behaviour to the
+		"config" attribute of PCI devices and provides an access to

the

Documentation/ABI/testing/sysfs-bus-rapidio new file +7 -0
+		RapidIO device registers using standard file read and write
+		operations.
+
+RapidIO Switch Device Attributes
+--------------------------------
+
+RapidIO switches have additional attributes in sysfs. RapidIO subsystem

supports
+common and device-specific sysfs attributes for switches. Because switches are

Documentation/ABI/testing/sysfs-bus-rapidio new file +12 -0
+integrated into the RapidIO subsystem, it offers a method to create
+device-specific sysfs attributes by specifying a callback function that may be
+set by the switch initialization routine during enumeration or discovery
+process.
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/routes
+Date:		Nov, 2005
+KernelVersion:	v2.6.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) reports switch routing information in "destID port"

format.

Documentation/ABI/testing/sysfs-bus-rapidio new file +10 -0
+		This attribute reports only valid routing table entries, one
+		line for each entry.
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/destid
+Date:		Mar, 2011
+KernelVersion:	v2.6.3
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) device destination ID of the associated device that

defines

Documentation/ABI/testing/sysfs-bus-rapidio new file +17 -0
+		a route to the switch
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/hopcount
+Date:		Mar, 2011
+KernelVersion:	v2.6.39
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) number of hops on the path to the switch
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/lnext
+Date:		Mar, 2011
+KernelVersion:	v2.6.39
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) returns names of devices linked to the switch except

one of

Documentation/ABI/testing/sysfs-bus-rapidio new file +2 -0
+		a device linked to the ingress port (reported as "lprev"). This
+		is an array names with number of lines equal to number of

ports

Documentation/ABI/testing/sysfs-bus-rapidio new file +26 -0
+		in switch. If a switch port has no attached device, returns
+		"null" instead of a device name.
+
+Device-specific Switch Attributes
+---------------------------------
+
+IDT_GEN2-
+
+What:		/sys/bus/rapidio/devices/nn:s:iiii/errlog
+Date:		Oct, 2010
+KernelVersion:	v2.6.37
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) reads contents of device error log until it is empty.
+
+RapidIO Bus Attributes
+----------------------
+
+What:		/sys/bus/rapidio/scan
+Date:		May, 2013
+KernelVersion:	v3.11
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(WO) Allows to trigger enumeration discovery process from

user

Documentation/ABI/testing/sysfs-bus-rapidio new file +4 -0
+		space. To initiate an enumeration or discovery process on
+		specific mport device, a user needs to write mport_ID (not
+		RapidIO destination ID) into this file. The mport_ID is a
+		sequential number (0 ...  RIO_MAX_MPORTS) assigned to the

mport

Documentation/ABI/testing/sysfs-bus-rapidio new file +3 -0
+		device. For example, for a machine with a single RapidIO
+		controller, mport_ID for that controller always will be 0. To
+		initiate RapidIO enumeration/discovery on all available

mports a

Documentation/ABI/testing/sysfs-bus-rapidio new file +2 -0
+		user must write '-1' (or RIO_MPORT_ANY) into this attribute
+		file.
Documentation/ABI/testing/sysfs-class-rapidio new file +4 -0
new file mode 100644
index 000000000000..8716beeb16c1
@@ -0,0 +1,55 @@
+What:		/sys/class/rapidio_port
+Description:
+		On-chip RapidIO controllers and PCIe-to-RapidIO bridges
+		(referenced as "Master Port" or "mport") are presented in

sysfs

Documentation/ABI/testing/sysfs-class-rapidio new file +3 -0
+		as the special class of devices: "rapidio_port".
+		The /sys/class/rapidio_port subdirectory contains individual
+		subdirectories named as "rapidioN" where N = mport ID

registered

Documentation/ABI/testing/sysfs-class-rapidio new file +2 -0
+		with RapidIO subsystem.
+		NOTE: An mport ID is not a RapidIO destination ID assigned to

a

Documentation/ABI/testing/sysfs-class-rapidio new file +20 -0
+		given local mport device.
+
+What:		/sys/class/rapidio_port/rapidioN/sys_size
+Date:		Apr, 2014
+KernelVersion:	v3.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) reports RapidIO common transport system size:
+		0 = small (8-bit destination ID, max. 256 devices),
+		1 = large (16-bit destination ID, max. 65536 devices).
+
+What:		/sys/class/rapidio_port/rapidioN/port_destid
+Date:		Apr, 2014
+KernelVersion:	v3.15
+Contact:	Matt Porter <[email protected]>,
+		Alexandre Bounine <[email protected]>
+Description:
+		(RO) reports RapidIO destination ID assigned to the given
+		RapidIO mport device. If value 0xFFFFFFFF is returned this

means

Documentation/ABI/testing/sysfs-class-rapidio new file +2 -0
+		that no valid destination ID have been assigned to the mport
+		(yet). Normally, before enumeration/discovery have been

executed

Documentation/ABI/testing/sysfs-class-rapidio new file +8 -0
+		only fabric enumerating mports have a valid destination ID
+		assigned to them using "hdid=..." rapidio module parameter.
+
+After enumeration or discovery was performed for a given mport device,
+the corresponding subdirectory will also contain subdirectories for each
+child RapidIO device connected to the mport.
+
+The example below shows mport device subdirectory with several child

RapidIO

Documentation/ABI/testing/sysfs-class-rapidio new file +14 -0
+devices attached to it.
+
+[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
+total 0
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0001
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0004
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0007
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0002
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0003
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0005
+lrwxrwxrwx 1 root root    0 Feb 11 15:11 device -> ../../../0000:01:00.0
+-r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
+drwxr-xr-x 2 root root    0 Feb 11 15:11 power
+lrwxrwxrwx 1 root root    0 Feb 11 15:04 subsystem ->

../../../../../../class/rapidio_port

+-r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
+-rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent
Documentation/rapidio/sysfs.txt +0 -3
index 47ce9a5336e1..a1adac888e6e 100644
@@ -1,158 +1,3 @@
-                         RapidIO sysfs Files
-
-

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~

Documentation/rapidio/sysfs.txt +0 -6
-
-1. RapidIO Device Subdirectories
---------------------------------
-
-For each RapidIO device, the RapidIO subsystem creates files in an individual
-subdirectory with the following name,

/sys/bus/rapidio/devices/<device_name>.

Documentation/rapidio/sysfs.txt +0 -9
-
-The format of device_name is "nn:d:iiii", where:
-
-nn - two-digit hexadecimal ID of RapidIO network where the device resides
-d  - device typr: 'e' - for endpoint or 's' - for switch
-iiii - four-digit device destID for endpoints, or switchID for switches
-
-For example, below is a list of device directories that represents a typical
-RapidIO network with one switch, one host, and two agent endpoints, as it

is

Documentation/rapidio/sysfs.txt +0 -7
-seen by the enumerating host (destID = 1):
-
-/sys/bus/rapidio/devices/00:e:0000
-/sys/bus/rapidio/devices/00:e:0002
-/sys/bus/rapidio/devices/00:s:0001
-
-NOTE: An enumerating or discovering endpoint does not create a sysfs entry

for

Documentation/rapidio/sysfs.txt +0 -6
-itself, this is why an endpoint with destID=1 is not shown in the list.
-
-2. Attributes Common for All RapidIO Devices
---------------------------------------------
-
-Each device subdirectory contains the following informational read-only

files:

Documentation/rapidio/sysfs.txt +0 -8
-
-       did - returns the device identifier
-       vid - returns the device vendor identifier
-device_rev - returns the device revision level
-   asm_did - returns identifier for the assembly containing the device
-   asm_rev - returns revision level of the assembly containing the device
-   asm_vid - returns vendor identifier of the assembly containing the device
-   destid  - returns device destination ID assigned by the enumeration

routine

Documentation/rapidio/sysfs.txt +0 -13
-             (see 4.1 for switch specific details)
-   lprev   - returns name of previous device (switch) on the path to the device
-             that that owns this attribute
-  modalias - returns the device modalias
-
-In addition to the files listed above, each device has a binary attribute file
-that allows read/write access to the device configuration registers using
-the RapidIO maintenance transactions:
-
- config - reads from and writes to the device configuration registers.
-
-This attribute is similar in behavior to the "config" attribute of PCI devices
-and provides an access to the RapidIO device registers using standard file

read

Documentation/rapidio/sysfs.txt +0 -6
-and write operations.
-
-3. RapidIO Endpoint Device Attributes
--------------------------------------
-
-Currently Linux RapidIO subsystem does not create any endpoint specific

sysfs
-attributes. It is possible that RapidIO master port drivers and endpoint device

Documentation/rapidio/sysfs.txt +0 -7
-drivers will add their device-specific sysfs attributes but such attributes are
-outside the scope of this document.
-
-4. RapidIO Switch Device Attributes
------------------------------------
-
-RapidIO switches have additional attributes in sysfs. RapidIO subsystem

supports
-common and device-specific sysfs attributes for switches. Because switches are

Documentation/rapidio/sysfs.txt +0 -3
-integrated into the RapidIO subsystem, it offers a method to create
-device-specific sysfs attributes by specifying a callback function that may be
-set by the switch initialization routine during enumeration or discovery

process.

Documentation/rapidio/sysfs.txt +0 -9
-
-4.1 Common Switch Attributes
-
-   routes - reports switch routing information in "destID port" format. This
-            attribute reports only valid routing table entries, one line for
-            each entry.
-   destid - device destination ID that defines a route to the switch
- hopcount - number of hops on the path to the switch
-    lnext - returns names of devices linked to the switch except one of a

device

Documentation/rapidio/sysfs.txt +0 -18
-            linked to the ingress port (reported as "lprev"). This is an array
-            names with number of lines equal to number of ports in switch. If
-            a switch port has no attached device, returns "null" instead of
-            a device name.
-
-4.2 Device-specific Switch Attributes
-
-Device-specific switch attributes are listed for each RapidIO switch driver
-that exports additional attributes.
-
-IDT_GEN2:
- errlog - reads contents of device error log until it is empty.
-
-
-5. RapidIO Bus Attributes
--------------------------
-
-RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-

specific

Documentation/rapidio/sysfs.txt +0 -3
-attribute:
-
-  scan - allows to trigger enumeration discovery process from user space.

This

Documentation/rapidio/sysfs.txt +0 -2
-	 is a write-only attribute. To initiate an enumeration or discovery
-	 process on specific mport device, a user needs to write mport_ID

(not

Documentation/rapidio/sysfs.txt +0 -3
-	 RapidIO destination ID) into this file. The mport_ID is a sequential
-	 number (0 ... RIO_MAX_MPORTS) assigned to the mport device.
-	 For example, for a machine with a single RapidIO controller,

mport_ID

Documentation/rapidio/sysfs.txt +0 -14
-	 for that controller always will be 0.
-	 To initiate RapidIO enumeration/discovery on all available mports
-	 a user must write '-1' (or RIO_MPORT_ANY) into this attribute file.
-
-
-6. RapidIO Bus Controllers/Ports
---------------------------------
-
-On-chip RapidIO controllers and PCIe-to-RapidIO bridges (referenced as
-"Master Port" or "mport") are presented in sysfs as the special class of
-devices: "rapidio_port".
-
-The /sys/class/rapidio_port subdirectory contains individual subdirectories
-named as "rapidioN" where N = mport ID registered with RapidIO

subsystem.

Documentation/rapidio/sysfs.txt +0 -20
-
-NOTE: An mport ID is not a RapidIO destination ID assigned to a given local
-mport device.
-
-Each mport device subdirectory in addition to standard entries contains the
-following device-specific attributes:
-
-   port_destid - reports RapidIO destination ID assigned to the given RapidIO
-                 mport device. If value 0xFFFFFFFF is returned this means that
-                 no valid destination ID have been assigned to the mport (yet).
-                 Normally, before enumeration/discovery have been executed only
-                 fabric enumerating mports have a valid destination ID assigned
-                 to them using "hdid=..." rapidio module parameter.
-      sys_size - reports RapidIO common transport system size:
-                   0 = small (8-bit destination ID, max. 256 devices),
-                   1 = large (16-bit destination ID, max. 65536 devices).
-
-After enumeration or discovery was performed for a given mport device,
-the corresponding subdirectory will also contain subdirectories for each
-child RapidIO device connected to the mport. Naming conventions for

RapidIO

Documentation/rapidio/sysfs.txt +0 -3
-devices are described in Section 1 above.
-
-The example below shows mport device subdirectory with several child

RapidIO

Documentation/rapidio/sysfs.txt +0 -14
-devices attached to it.
-
-[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
-total 0
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0001
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0004
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0007
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0002
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0003
-drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0005
-lrwxrwxrwx 1 root root    0 Feb 11 15:11 device -> ../../../0000:01:00.0
--r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
-drwxr-xr-x 2 root root    0 Feb 11 15:11 power
-lrwxrwxrwx 1 root root    0 Feb 11 15:04 subsystem ->

../../../../../../class/rapidio_port --r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size --rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent

Documentation/rapidio/sysfs.txt +3 -1
+The RapidIO sysfs files have moved to:
+Documentation/ABI/testing/sysfs-bus-rapidio and
+Documentation/ABI/testing/sysfs-class-rapidio
--

2.16.0