x86/kvm/hyperv: stable clocksource for L2 guests when running nested KVM on Hyper-V
Subsystems (5)
v4 cover x86/kvm/hyperv: stable clocksource for L2 guests when running nested KVM on Hyper-V
Changes since v3:
- PATCH3:
- drop 'include <linux/interrupt.h>' (and __visible/_irq_entry from hyperv_reenlightenment_intr declaration -- but not from implementation) from mshyperv.h [kbuild robot] I'm retaining Thomas' Reviewed-by tag as the change is small, hope that's OK.
- PATCH7:
- add static to kvm_hyperv_tsc_notifier() [kbuild robot]. I'm also keeping Paolo's Acked-by as the change is trivial.
So currently only PATCH2 of the series doesn't have a Reviewed-by/ Acked-by tag.
Original description:
Currently, KVM passes PVCLOCK_TSC_STABLE_BIT to its guests when running in so called 'masterclock' mode and this is only possible when the clocksource on the host is TSC. When running nested on Hyper-V we're using a different clocksource in L1 (Hyper-V TSC Page) which can actually be used for masterclock. This series brings the required support.
Making KVM work with TSC page clocksource is relatively easy, it is done in PATCH 6 of the series. All the rest is required to support L1 migration when TSC frequency changes, we use a special feature from Hyper-V to do the job.
Vitaly Kuznetsov (7):
x86/hyper-v: check for required priviliges in hyperv_init() x86/hyper-v: add a function to read both TSC and TSC page value
simulateneously
x86/hyper-v: reenlightenment notifications support x86/hyper-v: redirect reenlightment notifications on CPU offlining x86/irq: Count Hyper-V reenlightenment interrupts x86/kvm: pass stable clocksource to guests when running nested on
Hyper-V
x86/kvm: support Hyper-V reenlightenment
arch/x86/entry/entry_32.S | 3 + arch/x86/entry/entry_64.S | 3 + arch/x86/hyperv/hv_init.c | 123 ++++++++++++++++++++++++++++++++- arch/x86/include/asm/hardirq.h | 3 + arch/x86/include/asm/irq_vectors.h | 7 +- arch/x86/include/asm/mshyperv.h | 32 +++++++-- arch/x86/include/uapi/asm/hyperv.h | 27 ++++++++ arch/x86/kernel/cpu/mshyperv.c | 6 ++ arch/x86/kernel/irq.c | 9 +++ arch/x86/kvm/x86.c | 138 ++++++++++++++++++++++++++++++------- 10 files changed, 319 insertions(+), 32 deletions(-)
Signature · 1 line
2.14.3
PATCH v4 1/7 x86/hyper-v: check for required priviliges in hyperv_init()
In hyperv_init() we presume we always have access to VP index and hypercall MSRs while according to the specification we should check if we're allowed to access the corresponding MSRs before accessing them.
--- arch/x86/hyperv/hv_init.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
arch/x86/hyperv/hv_init.c +8 -1
@@ -110,12 +110,19 @@ static int hv_cpu_init(unsigned int cpu)*/ void hyperv_init (void ) { -u64 guest_id; +u64 guest_id, required_msrs;union hv_x64_msr_hypercall_contents hypercall_msr;if (x86_hyper_type !=X86_HYPER_MS_HYPERV )return ; +/* Absolutely required MSRs */ + required_msrs =HV_X64_MSR_HYPERCALL_AVAILABLE | +HV_X64_MSR_VP_INDEX_AVAILABLE ; + +if ((ms_hyperv.features & required_msrs) != required_msrs) +return ; +/* Allocate percpu VP index */ hv_vp_index =kmalloc_array (num_possible_cpus (),sizeof (*hv_vp_index),GFP_KERNEL );
Signature · 1 line
2.14.3
tip-bot for Vitaly Kuznetsov
merge bot[tip:x86/hyperv] x86/hyperv: Check for required priviliges in hyperv_init()
x86/hyperv: Check for required priviliges in hyperv_init()
Commit-ID: 89a8f6d4904c8cf3ff8fee9fdaff392a6bbb8bf6 Gitweb: https://git.kernel.org/tip/89a8f6d4904c8cf3ff8fee9fdaff392a6bbb8bf6 Author: Vitaly Kuznetsov <[email protected]> AuthorDate: Wed, 24 Jan 2018 14:23:31 +0100 Committer: Thomas Gleixner <[email protected]> CommitDate: Tue, 30 Jan 2018 23:55:32 +0100
x86/hyperv: Check for required priviliges in hyperv_init()
In hyperv_init() its presumed that it always has access to VP index and hypercall MSRs while according to the specification it should be checked if it's allowed to access the corresponding MSRs before accessing them.
--- arch/x86/hyperv/hv_init.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
arch/x86/hyperv/hv_init.c +8 -1
@@ -110,12 +110,19 @@ static int hv_cpu_init(unsigned int cpu)*/ void hyperv_init (void ) { -u64 guest_id; +u64 guest_id, required_msrs;union hv_x64_msr_hypercall_contents hypercall_msr;if (x86_hyper_type !=X86_HYPER_MS_HYPERV )return ; +/* Absolutely required MSRs */ + required_msrs =HV_X64_MSR_HYPERCALL_AVAILABLE | +HV_X64_MSR_VP_INDEX_AVAILABLE ; + +if ((ms_hyperv.features & required_msrs) != required_msrs) +return ; +/* Allocate percpu VP index */ hv_vp_index =kmalloc_array (num_possible_cpus (),sizeof (*hv_vp_index),GFP_KERNEL );
PATCH v4 2/7 x86/hyper-v: add a function to read both TSC and TSC page value simulateneously
In reply to Vitaly KuznetsovThis is going to be used from KVM code where we need to get both TSC and TSC page value.
Nobody is supposed to use the function when Hyper-V code is compiled out, just BUG().
--- arch/x86/hyperv/hv_init.c | 1 + arch/x86/include/asm/mshyperv.h | 23 +++++++++++++++++++---- 2 files changed, 20 insertions(+), 4 deletions(-)
arch/x86/hyperv/hv_init.c +1 -0
@@ -37,6 +37,7 @@ struct ms_hyperv_tsc_page *hv_get_tsc_page(void) {return tsc_pg; } +EXPORT_SYMBOL_GPL (hv_get_tsc_page);static u64 read_hv_clock_tsc (struct clocksource *arg) {
arch/x86/include/asm/mshyperv.h +19 -4
@@ -325,9 +325,10 @@ static inline void hyperv_setup_mmu_ops(void) {}#ifdef CONFIG_HYPERV_TSCPAGE struct ms_hyperv_tsc_page *hv_get_tsc_page (void ); -static inline u64 hv_read_tsc_page (const struct ms_hyperv_tsc_page *tsc_pg) +static inline u64 hv_read_tsc_page_tsc (const struct ms_hyperv_tsc_page *tsc_pg, +u64 *cur_tsc) { -u64 scale, offset, cur_tsc; +u64 scale, offset;u32 sequence;/*
@@ -358,7 +359,7 @@ static inline u64 hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg) scale =READ_ONCE (tsc_pg->tsc_scale); offset =READ_ONCE (tsc_pg->tsc_offset); - cur_tsc =rdtsc_ordered (); + *cur_tsc =rdtsc_ordered ();/* * Make sure we read sequence after we read all other values
@@ -368,7 +369,14 @@ static inline u64 hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg) } while (READ_ONCE(tsc_pg->tsc_sequence) != sequence); -return mul_u64_u64_shr (cur_tsc, scale,64 ) + offset; +return mul_u64_u64_shr (*cur_tsc, scale,64 ) + offset; +} + +static inline u64 hv_read_tsc_page (const struct ms_hyperv_tsc_page *tsc_pg) +{ +u64 cur_tsc; + +return hv_read_tsc_page_tsc (tsc_pg, &cur_tsc); }#else
@@ -376,5 +384,12 @@ static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void) {return NULL ; } + +static inline u64 hv_read_tsc_page_tsc (const struct ms_hyperv_tsc_page *tsc_pg, +u64 *cur_tsc) +{ +BUG (); +return U64_MAX ; +}#endif #endif
Signature · 1 line
2.14.3
tip-bot for Vitaly Kuznetsov
merge bot[tip:x86/hyperv] x86/hyperv: Add a function to read both TSC and TSC page value simulateneously
x86/hyperv: Add a function to read both TSC and TSC page value simulateneously
Commit-ID: e2768eaa1ca4fbb7b778da5615cce3dd310352e6 Gitweb: https://git.kernel.org/tip/e2768eaa1ca4fbb7b778da5615cce3dd310352e6 Author: Vitaly Kuznetsov <[email protected]> AuthorDate: Wed, 24 Jan 2018 14:23:32 +0100 Committer: Thomas Gleixner <[email protected]> CommitDate: Tue, 30 Jan 2018 23:55:32 +0100
x86/hyperv: Add a function to read both TSC and TSC page value simulateneously
This is going to be used from KVM code where both TSC and TSC page value are needed.
Nothing is supposed to use the function when Hyper-V code is compiled out, just BUG().
--- arch/x86/hyperv/hv_init.c | 1 + arch/x86/include/asm/mshyperv.h | 23 +++++++++++++++++++---- 2 files changed, 20 insertions(+), 4 deletions(-)
arch/x86/hyperv/hv_init.c +1 -0
@@ -37,6 +37,7 @@ struct ms_hyperv_tsc_page *hv_get_tsc_page(void) {return tsc_pg; } +EXPORT_SYMBOL_GPL (hv_get_tsc_page);static u64 read_hv_clock_tsc (struct clocksource *arg) {
arch/x86/include/asm/mshyperv.h +19 -4
@@ -325,9 +325,10 @@ static inline void hyperv_setup_mmu_ops(void) {}#ifdef CONFIG_HYPERV_TSCPAGE struct ms_hyperv_tsc_page *hv_get_tsc_page (void ); -static inline u64 hv_read_tsc_page (const struct ms_hyperv_tsc_page *tsc_pg) +static inline u64 hv_read_tsc_page_tsc (const struct ms_hyperv_tsc_page *tsc_pg, +u64 *cur_tsc) { -u64 scale, offset, cur_tsc; +u64 scale, offset;u32 sequence;/*
@@ -358,7 +359,7 @@ static inline u64 hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg) scale =READ_ONCE (tsc_pg->tsc_scale); offset =READ_ONCE (tsc_pg->tsc_offset); - cur_tsc =rdtsc_ordered (); + *cur_tsc =rdtsc_ordered ();/* * Make sure we read sequence after we read all other values
@@ -368,7 +369,14 @@ static inline u64 hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg) } while (READ_ONCE(tsc_pg->tsc_sequence) != sequence); -return mul_u64_u64_shr (cur_tsc, scale,64 ) + offset; +return mul_u64_u64_shr (*cur_tsc, scale,64 ) + offset; +} + +static inline u64 hv_read_tsc_page (const struct ms_hyperv_tsc_page *tsc_pg) +{ +u64 cur_tsc; + +return hv_read_tsc_page_tsc (tsc_pg, &cur_tsc); }#else
@@ -376,5 +384,12 @@ static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void) {return NULL ; } + +static inline u64 hv_read_tsc_page_tsc (const struct ms_hyperv_tsc_page *tsc_pg, +u64 *cur_tsc) +{ +BUG (); +return U64_MAX ; +}#endif #endif
PATCH v4 3/7 x86/hyper-v: reenlightenment notifications support
In reply to Vitaly KuznetsovHyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when we are migrated to a host with different TSC frequency for some short period host emulates our accesses to TSC and sends us an interrupt to notify about the event. When we're done updating everything we can disable TSC emulation and everything will start working fast again.
We didn't need these notifications before as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux we even mark it as unstable on boot. Guests normally use 'tsc page' clocksouce and host updates its values on migrations automatically.
Things change when we want to run nested virtualization: even when we pass through PV clocksources (kvm-clock or tsc page) to our guests we need to know TSC frequency and when it changes.
Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way.
---
v3 -> v4:
- drop 'include <linux/interrupt.h>' (and __visible/_irq_entry from hyperv_reenlightenment_intr declaration) from mshyperv.h [kbuild robot]
--- arch/x86/entry/entry_32.S | 3 ++ arch/x86/entry/entry_64.S | 3 ++ arch/x86/hyperv/hv_init.c | 89 ++++++++++++++++++++++++++++++++++++++ arch/x86/include/asm/irq_vectors.h | 7 ++- arch/x86/include/asm/mshyperv.h | 9 ++++ arch/x86/include/uapi/asm/hyperv.h | 27 ++++++++++++ arch/x86/kernel/cpu/mshyperv.c | 6 +++ 7 files changed, 143 insertions(+), 1 deletion(-)
arch/x86/entry/entry_32.S +3 -0
@@ -894,6 +894,9 @@ BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR, BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR, hyperv_vector_handler) +BUILD_INTERRUPT3(hyperv_reenlightenment_vector, HYPERV_REENLIGHTENMENT_VECTOR, + hyperv_reenlightenment_intr) + #endif /* CONFIG_HYPERV */ ENTRY(page_fault)
arch/x86/entry/entry_64.S +3 -0
@@ -1244,6 +1244,9 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ #if IS_ENABLED(CONFIG_HYPERV) apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ hyperv_callback_vector hyperv_vector_handler + +apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \ + hyperv_reenlightenment_vector hyperv_reenlightenment_intr #endif /* CONFIG_HYPERV */ idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
arch/x86/hyperv/hv_init.c +89 -0
101 lines not on this page · raw message
arch/x86/include/asm/irq_vectors.h +6 -1
@@ -103,7 +103,12 @@#endif #define MANAGED_IRQ_SHUTDOWN_VECTOR 0xef -#define LOCAL_TIMER_VECTOR 0xee + +#if IS_ENABLED (CONFIG_HYPERV ) +#define HYPERV_REENLIGHTENMENT_VECTOR 0xee +#endif + +#define LOCAL_TIMER_VECTOR 0xed#define NR_VECTORS 256
arch/x86/include/asm/mshyperv.h +9 -0
@@ -160,6 +160,7 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)#define hv_set_synint_state (int_num, val) wrmsrl(int_num, val)void hyperv_callback_vector (void ); +void hyperv_reenlightenment_vector (void );#ifdef CONFIG_TRACING #define trace_hyperv_callback_vector hyperv_callback_vector#endif
@@ -316,11 +317,19 @@ void hyper_alloc_mmu(void);void hyperv_report_panic (struct pt_regs *regs,long err);bool hv_is_hypercall_page_setup (void );void hyperv_cleanup (void ); + +void hyperv_reenlightenment_intr (struct pt_regs *regs); +void set_hv_tscchange_cb (void (*cb)(void )); +void clear_hv_tscchange_cb (void ); +void hyperv_stop_tsc_emulation (void );#else /* CONFIG_HYPERV */ static inline void hyperv_init (void ) {}static inline bool hv_is_hypercall_page_setup (void ) {return false; }static inline void hyperv_cleanup (void ) {}static inline void hyperv_setup_mmu_ops (void ) {} +static inline void set_hv_tscchange_cb (void (*cb)(void )) {} +static inline void clear_hv_tscchange_cb (void ) {} +static inline void hyperv_stop_tsc_emulation (void ) {};#endif /* CONFIG_HYPERV */ #ifdef CONFIG_HYPERV_TSCPAGE
arch/x86/include/uapi/asm/hyperv.h +27 -0
@@ -40,6 +40,9 @@*/ #define HV_X64_ACCESS_FREQUENCY_MSRS (1 << 11) +/* AccessReenlightenmentControls privilege */ +#define HV_X64_ACCESS_REENLIGHTENMENT BIT(13) +/* * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
@@ -234,6 +237,30 @@#define HV_X64_MSR_CRASH_PARAMS \ (1 + (HV_X64_MSR_CRASH_P4 - HV_X64_MSR_CRASH_P0)) +/* TSC emulation after migration */ +#define HV_X64_MSR_REENLIGHTENMENT_CONTROL 0x40000106 + +struct hv_reenlightenment_control { +u64 vector:8 ; +u64 reserved1:8 ; +u64 enabled:1 ; +u64 reserved2:15 ; +u64 target_vp:32 ; +}; + +#define HV_X64_MSR_TSC_EMULATION_CONTROL 0x40000107 +#define HV_X64_MSR_TSC_EMULATION_STATUS 0x40000108 + +struct hv_tsc_emulation_control { +u64 enabled:1 ; +u64 reserved:63 ; +}; + +struct hv_tsc_emulation_status { +u64 inprogress:1 ; +u64 reserved:63 ; +}; +#define HV_X64_MSR_HYPERCALL_ENABLE 0x00000001#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT 12#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK \
arch/x86/kernel/cpu/mshyperv.c +6 -0
@@ -251,6 +251,12 @@ static void __init ms_hyperv_init_platform(void)hyperv_setup_mmu_ops ();/* Setup the IDT for hypervisor callback */ alloc_intr_gate (HYPERVISOR_CALLBACK_VECTOR , hyperv_callback_vector); + +/* Setup the IDT for reenlightenment notifications */ +if (ms_hyperv.features &HV_X64_ACCESS_REENLIGHTENMENT ) +alloc_intr_gate (HYPERV_REENLIGHTENMENT_VECTOR , + hyperv_reenlightenment_vector); +#endif }
Signature · 1 line
2.14.3
tip-bot for Vitaly Kuznetsov
merge bot[tip:x86/hyperv] x86/hyperv: Reenlightenment notifications support
x86/hyperv: Reenlightenment notifications support
Commit-ID: 93286261de1b46339aa27cd4c639b21778f6cade Gitweb: https://git.kernel.org/tip/93286261de1b46339aa27cd4c639b21778f6cade Author: Vitaly Kuznetsov <[email protected]> AuthorDate: Wed, 24 Jan 2018 14:23:33 +0100 Committer: Thomas Gleixner <[email protected]> CommitDate: Tue, 30 Jan 2018 23:55:32 +0100
x86/hyperv: Reenlightenment notifications support
Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again.
These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically.
Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know..
Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way.
--- arch/x86/entry/entry_32.S | 3 ++ arch/x86/entry/entry_64.S | 3 ++ arch/x86/hyperv/hv_init.c | 89 ++++++++++++++++++++++++++++++++++++++ arch/x86/include/asm/irq_vectors.h | 7 ++- arch/x86/include/asm/mshyperv.h | 9 ++++ arch/x86/include/uapi/asm/hyperv.h | 27 ++++++++++++ arch/x86/kernel/cpu/mshyperv.c | 6 +++ 7 files changed, 143 insertions(+), 1 deletion(-)
arch/x86/entry/entry_32.S +3 -0
@@ -895,6 +895,9 @@ BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR, BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR, hyperv_vector_handler) +BUILD_INTERRUPT3(hyperv_reenlightenment_vector, HYPERV_REENLIGHTENMENT_VECTOR, + hyperv_reenlightenment_intr) + #endif /* CONFIG_HYPERV */ ENTRY(page_fault)
arch/x86/entry/entry_64.S +3 -0
@@ -1245,6 +1245,9 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ #if IS_ENABLED(CONFIG_HYPERV) apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ hyperv_callback_vector hyperv_vector_handler + +apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \ + hyperv_reenlightenment_vector hyperv_reenlightenment_intr #endif /* CONFIG_HYPERV */ idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
arch/x86/hyperv/hv_init.c +89 -0
101 lines not on this page · raw message
arch/x86/include/asm/irq_vectors.h +6 -1
@@ -103,7 +103,12 @@#endif #define MANAGED_IRQ_SHUTDOWN_VECTOR 0xef -#define LOCAL_TIMER_VECTOR 0xee + +#if IS_ENABLED (CONFIG_HYPERV ) +#define HYPERV_REENLIGHTENMENT_VECTOR 0xee +#endif + +#define LOCAL_TIMER_VECTOR 0xed#define NR_VECTORS 256
arch/x86/include/asm/mshyperv.h +9 -0
@@ -160,6 +160,7 @@ static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)#define hv_set_synint_state (int_num, val) wrmsrl(int_num, val)void hyperv_callback_vector (void ); +void hyperv_reenlightenment_vector (void );#ifdef CONFIG_TRACING #define trace_hyperv_callback_vector hyperv_callback_vector#endif
@@ -316,11 +317,19 @@ void hyper_alloc_mmu(void);void hyperv_report_panic (struct pt_regs *regs,long err);bool hv_is_hypercall_page_setup (void );void hyperv_cleanup (void ); + +void hyperv_reenlightenment_intr (struct pt_regs *regs); +void set_hv_tscchange_cb (void (*cb)(void )); +void clear_hv_tscchange_cb (void ); +void hyperv_stop_tsc_emulation (void );#else /* CONFIG_HYPERV */ static inline void hyperv_init (void ) {}static inline bool hv_is_hypercall_page_setup (void ) {return false; }static inline void hyperv_cleanup (void ) {}static inline void hyperv_setup_mmu_ops (void ) {} +static inline void set_hv_tscchange_cb (void (*cb)(void )) {} +static inline void clear_hv_tscchange_cb (void ) {} +static inline void hyperv_stop_tsc_emulation (void ) {};#endif /* CONFIG_HYPERV */ #ifdef CONFIG_HYPERV_TSCPAGE
arch/x86/include/uapi/asm/hyperv.h +27 -0
@@ -40,6 +40,9 @@*/ #define HV_X64_ACCESS_FREQUENCY_MSRS (1 << 11) +/* AccessReenlightenmentControls privilege */ +#define HV_X64_ACCESS_REENLIGHTENMENT BIT(13) +/* * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
@@ -234,6 +237,30 @@#define HV_X64_MSR_CRASH_PARAMS \ (1 + (HV_X64_MSR_CRASH_P4 - HV_X64_MSR_CRASH_P0)) +/* TSC emulation after migration */ +#define HV_X64_MSR_REENLIGHTENMENT_CONTROL 0x40000106 + +struct hv_reenlightenment_control { +u64 vector:8 ; +u64 reserved1:8 ; +u64 enabled:1 ; +u64 reserved2:15 ; +u64 target_vp:32 ; +}; + +#define HV_X64_MSR_TSC_EMULATION_CONTROL 0x40000107 +#define HV_X64_MSR_TSC_EMULATION_STATUS 0x40000108 + +struct hv_tsc_emulation_control { +u64 enabled:1 ; +u64 reserved:63 ; +}; + +struct hv_tsc_emulation_status { +u64 inprogress:1 ; +u64 reserved:63 ; +}; +#define HV_X64_MSR_HYPERCALL_ENABLE 0x00000001#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT 12#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK \
arch/x86/kernel/cpu/mshyperv.c +6 -0
@@ -251,6 +251,12 @@ static void __init ms_hyperv_init_platform(void)hyperv_setup_mmu_ops ();/* Setup the IDT for hypervisor callback */ alloc_intr_gate (HYPERVISOR_CALLBACK_VECTOR , hyperv_callback_vector); + +/* Setup the IDT for reenlightenment notifications */ +if (ms_hyperv.features &HV_X64_ACCESS_REENLIGHTENMENT ) +alloc_intr_gate (HYPERV_REENLIGHTENMENT_VECTOR , + hyperv_reenlightenment_vector); +#endif }
PATCH v4 4/7 x86/hyper-v: redirect reenlightment notifications on CPU offlining
In reply to Vitaly KuznetsovIt is very unlikely for CPUs to get offlined when we run on Hyper-V as we have a protection in vmbus module which prevents it when we have any VMBus devices assigned. This, however, may change in future if an option to reassign an already active channel will be added. It is also possible to run without any Hyper-V devices of have a CPU with no assigned channels.
Reassign reenlightenment notifications to some other active CPU when the CPU which is assigned to get them goes offline.
--- arch/x86/hyperv/hv_init.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
arch/x86/hyperv/hv_init.c +21 -1
@@ -191,6 +191,26 @@ void clear_hv_tscchange_cb(void) }EXPORT_SYMBOL_GPL (clear_hv_tscchange_cb); +static int hv_cpu_die (unsigned int cpu) +{ +struct hv_reenlightenment_control re_ctrl; +unsigned int new_cpu; + +if (hv_reenlightenment_cb ==NULL ) +return 0 ; + +rdmsrl (HV_X64_MSR_REENLIGHTENMENT_CONTROL , *((u64 *)&re_ctrl)); +if (re_ctrl.target_vp == hv_vp_index[cpu]) { +/* Reassign to some other online CPU */ + new_cpu =cpumask_any_but (cpu_online_mask, cpu); + + re_ctrl.target_vp = hv_vp_index[new_cpu]; +wrmsrl (HV_X64_MSR_REENLIGHTENMENT_CONTROL , *((u64 *)&re_ctrl)); + } + +return 0 ; +} +/* * This function is to be invoked early in the boot sequence after the * hypervisor has been detected.
@@ -220,7 +240,7 @@ void hyperv_init(void)return ;if (cpuhp_setup_state (CPUHP_AP_ONLINE_DYN ,"x86/hyperv_init:online" , - hv_cpu_init,NULL ) <0 ) + hv_cpu_init, hv_cpu_die) <0 ) goto free_vp_index;/*
Signature · 1 line
2.14.3
tip-bot for Vitaly Kuznetsov
merge bot[tip:x86/hyperv] x86/hyperv: Redirect reenlightment notifications on CPU offlining
x86/hyperv: Redirect reenlightment notifications on CPU offlining
Commit-ID: e7c4e36c447daca2b7df49024f6bf230871cb155 Gitweb: https://git.kernel.org/tip/e7c4e36c447daca2b7df49024f6bf230871cb155 Author: Vitaly Kuznetsov <[email protected]> AuthorDate: Wed, 24 Jan 2018 14:23:34 +0100 Committer: Thomas Gleixner <[email protected]> CommitDate: Tue, 30 Jan 2018 23:55:33 +0100
x86/hyperv: Redirect reenlightment notifications on CPU offlining
It is very unlikely for CPUs to get offlined when running on Hyper-V as there is a protection in the vmbus module which prevents it when the guest has any VMBus devices assigned. This, however, may change in future if an option to reassign an already active channel will be added. It is also possible to run without any Hyper-V devices or to have a CPU with no assigned channels.
Reassign reenlightenment notifications to some other active CPU when the CPU which is assigned to them goes offline.
--- arch/x86/hyperv/hv_init.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
arch/x86/hyperv/hv_init.c +21 -1
@@ -191,6 +191,26 @@ void clear_hv_tscchange_cb(void) }EXPORT_SYMBOL_GPL (clear_hv_tscchange_cb); +static int hv_cpu_die (unsigned int cpu) +{ +struct hv_reenlightenment_control re_ctrl; +unsigned int new_cpu; + +if (hv_reenlightenment_cb ==NULL ) +return 0 ; + +rdmsrl (HV_X64_MSR_REENLIGHTENMENT_CONTROL , *((u64 *)&re_ctrl)); +if (re_ctrl.target_vp == hv_vp_index[cpu]) { +/* Reassign to some other online CPU */ + new_cpu =cpumask_any_but (cpu_online_mask, cpu); + + re_ctrl.target_vp = hv_vp_index[new_cpu]; +wrmsrl (HV_X64_MSR_REENLIGHTENMENT_CONTROL , *((u64 *)&re_ctrl)); + } + +return 0 ; +} +/* * This function is to be invoked early in the boot sequence after the * hypervisor has been detected.
@@ -220,7 +240,7 @@ void hyperv_init(void)return ;if (cpuhp_setup_state (CPUHP_AP_ONLINE_DYN ,"x86/hyperv_init:online" , - hv_cpu_init,NULL ) <0 ) + hv_cpu_init, hv_cpu_die) <0 ) goto free_vp_index;/*
PATCH v4 5/7 x86/irq: Count Hyper-V reenlightenment interrupts
In reply to Vitaly KuznetsovHyper-V reenlightenment interrupts arrive when the VM is migrated, we're not supposed to see many of them. However, it may be important to know that the event has happened in case we have L2 nested guests.
--- arch/x86/hyperv/hv_init.c | 2 ++ arch/x86/include/asm/hardirq.h | 3 +++ arch/x86/kernel/irq.c | 9 +++++++++ 3 files changed, 14 insertions(+)
arch/x86/hyperv/hv_init.c +2 -0
@@ -147,6 +147,8 @@ __visible void __irq_entry hyperv_reenlightenment_intr(struct pt_regs *regs) {entering_ack_irq (); +inc_irq_stat (irq_hv_reenlightenment_count); +schedule_delayed_work (&hv_reenlightenment_work,HZ /10 );exiting_irq ();
arch/x86/include/asm/hardirq.h +3 -0
@@ -38,6 +38,9 @@ typedef struct {#if IS_ENABLED (CONFIG_HYPERV ) || defined(CONFIG_XEN )unsigned int irq_hv_callback_count;#endif +#if IS_ENABLED (CONFIG_HYPERV ) +unsigned int irq_hv_reenlightenment_count; +#endif }____cacheline_aligned irq_cpustat_t;DECLARE_PER_CPU_SHARED_ALIGNED (irq_cpustat_t, irq_stat);
arch/x86/kernel/irq.c +9 -0
@@ -141,6 +141,15 @@ int arch_show_interrupts(struct seq_file *p, int prec) irq_stats(j)->irq_hv_callback_count); seq_puts(p, " Hypervisor callback interrupts\n"); } +#endif +#if IS_ENABLED (CONFIG_HYPERV ) +if (test_bit (HYPERV_REENLIGHTENMENT_VECTOR , system_vectors)) { +seq_printf (p,"%*s: " , prec,"HRE" ); +for_each_online_cpu (j) +seq_printf (p,"%10u " , +irq_stats (j)->irq_hv_reenlightenment_count); +seq_puts (p," Hyper-V reenlightenment interrupts\n" ); + }#endif seq_printf (p,"%*s: %10u\n" , prec,"ERR" ,atomic_read (&irq_err_count));#if defined(CONFIG_X86_IO_APIC )
Signature · 1 line
2.14.3
Re: [PATCH v4 5/7] x86/irq: Count Hyper-V reenlightenment interrupts
2018-01-24 14:23+0100, Vitaly Kuznetsov:
Quoted 7 lines
Hyper-V reenlightenment interrupts arrive when the VM is migrated, we're not supposed to see many of them. However, it may be important to know that the event has happened in case we have L2 nested guests.
Signed-off-by Vitaly Kuznetsov <[email protected]>Reviewed-by Thomas Gleixner <[email protected]>---
Thomas,
I think the expectation is that this series will go through the KVM tree. Would you prefer a topic branch?
Thanks.
Re: [PATCH v4 5/7] x86/irq: Count Hyper-V reenlightenment interrupts
Quoted 5 lines · Radim Krčmář
2018-01-24 14:23+0100, Vitaly Kuznetsov:
Quoted 4 lines
Hyper-V reenlightenment interrupts arrive when the VM is migrated, we're not supposed to see many of them. However, it may be important to know that the event has happened in case we have L2 nested guests.
Quoted 8 lines
Quoted 3 lines
Signed-off-by Vitaly Kuznetsov <[email protected]>Reviewed-by Thomas Gleixner <[email protected]>---
Thomas,
I think the expectation is that this series will go through the KVM tree. Would you prefer a topic branch?
Is there any dependency outside of plain 4.15? If not, I'll put it into x86/hyperv and let KVM folks pull it over.
Thanks,
tglx
Re: [PATCH v4 5/7] x86/irq: Count Hyper-V reenlightenment interrupts
2018-01-29 22:48+0100, Thomas Gleixner:
Quoted 10 lines · Radim Krčmář
Quoted 9 lines
2018-01-24 14:23+0100, Vitaly Kuznetsov:
Quoted 7 lines
Hyper-V reenlightenment interrupts arrive when the VM is migrated, we're not supposed to see many of them. However, it may be important to know that the event has happened in case we have L2 nested guests.
Signed-off-by Vitaly Kuznetsov <[email protected]>Reviewed-by Thomas Gleixner <[email protected]>---
Quoted 7 lines
Quoted 4 lines
Thomas,
I think the expectation is that this series will go through the KVM tree. Would you prefer a topic branch?
Is there any dependency outside of plain 4.15? If not, I'll put it into x86/hyperv and let KVM folks pull it over.
There isn't; we'll wait for x86/hyperv, thanks.
Re: [PATCH v4 5/7] x86/irq: Count Hyper-V reenlightenment interrupts
Quoted 13 lines · Radim Krčmář
2018-01-29 22:48+0100, Thomas Gleixner:
Quoted 12 lines · Radim Krčmář
Quoted 11 lines
2018-01-24 14:23+0100, Vitaly Kuznetsov:
Quoted 7 lines
Hyper-V reenlightenment interrupts arrive when the VM is migrated, we're not supposed to see many of them. However, it may be important to know that the event has happened in case we have L2 nested guests.
Signed-off-by Vitaly Kuznetsov <[email protected]>Reviewed-by Thomas Gleixner <[email protected]>---
Thomas,
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
I think the expectation is that this series will go through the KVM tree. Would you prefer a topic branch?
Is there any dependency outside of plain 4.15? If not, I'll put it into x86/hyperv and let KVM folks pull it over.
There isn't; we'll wait for x86/hyperv, thanks.
Will be there tomorrow. I'll let you know.
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
Re: [PATCH v4 5/7] x86/irq: Count Hyper-V reenlightenment interrupts
Quoted 17 lines · Thomas Gleixner
Quoted 16 lines · Radim Krčmář
2018-01-29 22:48+0100, Thomas Gleixner:
Quoted 15 lines · Radim Krčmář
Quoted 13 lines
2018-01-24 14:23+0100, Vitaly Kuznetsov:
Quoted 7 lines
Hyper-V reenlightenment interrupts arrive when the VM is migrated, we're not supposed to see many of them. However, it may be important to know that the event has happened in case we have L2 nested guests.
Signed-off-by Vitaly Kuznetsov <[email protected]>Reviewed-by Thomas Gleixner <[email protected]>---
Thomas,
I think the expectation is that this series will go through the KVM tree. Would you prefer a topic branch?
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Is there any dependency outside of plain 4.15? If not, I'll put it into x86/hyperv and let KVM folks pull it over.
There isn't; we'll wait for x86/hyperv, thanks.
Will be there tomorrow. I'll let you know.
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/hyperv
Feel free to pull it into your tree.
Thanks,
tglx
tip-bot for Vitaly Kuznetsov
merge bot[tip:x86/hyperv] x86/irq: Count Hyper-V reenlightenment interrupts
In reply to Vitaly Kuznetsovx86/irq: Count Hyper-V reenlightenment interrupts
Commit-ID: 51d4e5daa32808df4d50db511d167fde19fa114e Gitweb: https://git.kernel.org/tip/51d4e5daa32808df4d50db511d167fde19fa114e Author: Vitaly Kuznetsov <[email protected]> AuthorDate: Wed, 24 Jan 2018 14:23:35 +0100 Committer: Thomas Gleixner <[email protected]> CommitDate: Tue, 30 Jan 2018 23:55:33 +0100
x86/irq: Count Hyper-V reenlightenment interrupts
Hyper-V reenlightenment interrupts arrive when the VM is migrated, While they are not interesting in general it's important when L2 nested guests are running.
--- arch/x86/hyperv/hv_init.c | 2 ++ arch/x86/include/asm/hardirq.h | 3 +++ arch/x86/kernel/irq.c | 9 +++++++++ 3 files changed, 14 insertions(+)
arch/x86/hyperv/hv_init.c +2 -0
@@ -147,6 +147,8 @@ __visible void __irq_entry hyperv_reenlightenment_intr(struct pt_regs *regs) {entering_ack_irq (); +inc_irq_stat (irq_hv_reenlightenment_count); +schedule_delayed_work (&hv_reenlightenment_work,HZ /10 );exiting_irq ();
arch/x86/include/asm/hardirq.h +3 -0
@@ -38,6 +38,9 @@ typedef struct {#if IS_ENABLED (CONFIG_HYPERV ) || defined(CONFIG_XEN )unsigned int irq_hv_callback_count;#endif +#if IS_ENABLED (CONFIG_HYPERV ) +unsigned int irq_hv_reenlightenment_count; +#endif }____cacheline_aligned irq_cpustat_t;DECLARE_PER_CPU_SHARED_ALIGNED (irq_cpustat_t, irq_stat);
arch/x86/kernel/irq.c +9 -0
@@ -142,6 +142,15 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_puts(p, " Hypervisor callback interrupts\n"); }#endif +#if IS_ENABLED (CONFIG_HYPERV ) +if (test_bit (HYPERV_REENLIGHTENMENT_VECTOR , system_vectors)) { +seq_printf (p,"%*s: " , prec,"HRE" ); +for_each_online_cpu (j) +seq_printf (p,"%10u " , +irq_stats (j)->irq_hv_reenlightenment_count); +seq_puts (p," Hyper-V reenlightenment interrupts\n" ); + } +#endif seq_printf (p,"%*s: %10u\n" , prec,"ERR" ,atomic_read (&irq_err_count));#if defined(CONFIG_X86_IO_APIC )seq_printf (p,"%*s: %10u\n" , prec,"MIS" ,atomic_read (&irq_mis_count));
PATCH v4 6/7 x86/kvm: pass stable clocksource to guests when running nested on Hyper-V
In reply to Vitaly KuznetsovCurrently, KVM is able to work in 'masterclock' mode passing PVCLOCK_TSC_STABLE_BIT to guests when the clocksource we use on the host is TSC. When running nested on Hyper-V we normally use a different one:
TSC page which is resistant to TSC frequency changes on event like L1 migration. Add support for it in KVM.
The only non-trivial change in the patch is in vgettsc(): when updating our gtod copy we now need to get both the clockread and tsc value.
--- arch/x86/kvm/x86.c | 93 +++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 68 insertions(+), 25 deletions(-)
arch/x86/kvm/x86.c +68 -25
@@ -67,6 +67,7 @@#include <asm/pvclock.h> #include <asm/div64.h> #include <asm/irq_remapping.h> +#include <asm/mshyperv.h> #define CREATE_TRACE_POINTS #include "trace.h"
@@ -1377,6 +1378,11 @@ static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)return tsc; } +static inline int gtod_is_based_on_tsc (int mode) +{ +return mode ==VCLOCK_TSC || mode ==VCLOCK_HVCLOCK ; +} +static void kvm_track_tsc_matching (struct kvm_vcpu *vcpu) {#ifdef CONFIG_X86_64
@@ -1396,7 +1402,7 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu)* perform request to enable masterclock. */ if (ka->use_master_clock || - (gtod->clock.vclock_mode ==VCLOCK_TSC && vcpus_matched)) + (gtod_is_based_on_tsc (gtod->clock.vclock_mode) && vcpus_matched))kvm_make_request (KVM_REQ_MASTERCLOCK_UPDATE , vcpu); trace_kvm_track_tsc(vcpu->vcpu_id, ka->nr_vcpus_matched_tsc,
@@ -1459,6 +1465,19 @@ static void kvm_vcpu_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) vcpu->arch.tsc_offset = offset; } +static inline bool kvm_check_tsc_unstable (void ) +{ +#ifdef CONFIG_X86_64 +/* +* TSC is marked unstable when we're running on Hyper-V, +* 'TSC page' clocksource is good. +*/ +if (pvclock_gtod_data.clock.vclock_mode ==VCLOCK_HVCLOCK ) +return false; +#endif +return check_tsc_unstable (); +} +void kvm_write_tsc (struct kvm_vcpu *vcpu,struct msr_data *msr) {struct kvm *kvm = vcpu->kvm;
@@ -1504,7 +1523,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)*/ if (synchronizing && vcpu->arch.virtual_tsc_khz == kvm->arch.last_tsc_khz) { -if (!check_tsc_unstable ()) { +if (!kvm_check_tsc_unstable ()) { offset = kvm->arch.cur_tsc_offset;pr_debug ("kvm: matched tsc offset for %llu\n" , data); }else {
@@ -1604,18 +1623,43 @@ static u64 read_tsc(void)return last; } -static inline u64 vgettsc (u64 *cycle_now) +static inline u64 vgettsc (u64 *tsc_timestamp,int *mode) {long v;struct pvclock_gtod_data *gtod = &pvclock_gtod_data; +u64 tsc_pg_val; + +switch (gtod->clock.vclock_mode) { +case VCLOCK_HVCLOCK : + tsc_pg_val =hv_read_tsc_page_tsc (hv_get_tsc_page (), + tsc_timestamp); +if (tsc_pg_val !=U64_MAX ) { +/* TSC page valid */ + *mode =VCLOCK_HVCLOCK ; + v = (tsc_pg_val - gtod->clock.cycle_last) & + gtod->clock.mask; + }else { +/* TSC page invalid */ + *mode =VCLOCK_NONE ; + } +break ; +case VCLOCK_TSC : + *mode =VCLOCK_TSC ; + *tsc_timestamp =read_tsc (); + v = (*tsc_timestamp - gtod->clock.cycle_last) & + gtod->clock.mask; +break ; +default : + *mode =VCLOCK_NONE ; + } - *cycle_now =read_tsc (); +if (*mode ==VCLOCK_NONE ) + *tsc_timestamp = v =0 ; - v = (*cycle_now - gtod->clock.cycle_last) & gtod->clock.mask;return v * gtod->clock.mult; } -static int do_monotonic_boot (s64 *t,u64 *cycle_now) +static int do_monotonic_boot (s64 *t,u64 *tsc_timestamp) {struct pvclock_gtod_data *gtod = &pvclock_gtod_data;unsigned long seq;
@@ -1624,9 +1668,8 @@ static int do_monotonic_boot(s64 *t, u64 *cycle_now)do { seq =read_seqcount_begin (>od->seq); - mode = gtod->clock.vclock_mode; ns = gtod->nsec_base; - ns +=vgettsc (cycle_now); + ns +=vgettsc (tsc_timestamp, &mode); ns >>= gtod->clock.shift; ns += gtod->boot_ns; }while (unlikely (read_seqcount_retry (>od->seq, seq)));
@@ -1635,7 +1678,7 @@ static int do_monotonic_boot(s64 *t, u64 *cycle_now)return mode; } -static int do_realtime (struct timespec *ts,u64 *cycle_now) +static int do_realtime (struct timespec *ts,u64 *tsc_timestamp) {struct pvclock_gtod_data *gtod = &pvclock_gtod_data;unsigned long seq;
@@ -1644,10 +1687,9 @@ static int do_realtime(struct timespec *ts, u64 *cycle_now)do { seq =read_seqcount_begin (>od->seq); - mode = gtod->clock.vclock_mode; ts->tv_sec = gtod->wall_time_sec; ns = gtod->nsec_base; - ns +=vgettsc (cycle_now); + ns +=vgettsc (tsc_timestamp, &mode); ns >>= gtod->clock.shift; }while (unlikely (read_seqcount_retry (>od->seq, seq)));
@@ -1657,25 +1699,26 @@ static int do_realtime(struct timespec *ts, u64 *cycle_now) return mode; } -/* returns true if host is using tsc clocksource */ -static bool kvm_get_time_and_clockread (s64 *kernel_ns,u64 *cycle_now) +/* returns true if host is using TSC based clocksource */ +static bool kvm_get_time_and_clockread (s64 *kernel_ns,u64 *tsc_timestamp) {/* checked again under seqlock below */ -if (pvclock_gtod_data.clock.vclock_mode !=VCLOCK_TSC ) +if (!gtod_is_based_on_tsc (pvclock_gtod_data.clock.vclock_mode))return false; -return do_monotonic_boot (kernel_ns, cycle_now) ==VCLOCK_TSC ; +return gtod_is_based_on_tsc (do_monotonic_boot (kernel_ns, + tsc_timestamp)); } -/* returns true if host is using tsc clocksource */ +/* returns true if host is using TSC based clocksource */ static bool kvm_get_walltime_and_clockread (struct timespec *ts, -u64 *cycle_now) +u64 *tsc_timestamp) {/* checked again under seqlock below */ -if (pvclock_gtod_data.clock.vclock_mode !=VCLOCK_TSC ) +if (!gtod_is_based_on_tsc (pvclock_gtod_data.clock.vclock_mode))return false; -return do_realtime (ts, cycle_now) ==VCLOCK_TSC ; +return gtod_is_based_on_tsc (do_realtime (ts, tsc_timestamp)); }#endif
@@ -2869,13 +2912,13 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)kvm_make_request (KVM_REQ_CLOCK_UPDATE , vcpu); } -if (unlikely (vcpu->cpu != cpu) ||check_tsc_unstable ()) { +if (unlikely (vcpu->cpu != cpu) ||kvm_check_tsc_unstable ()) {s64 tsc_delta = !vcpu->arch.last_host_tsc ?0 :rdtsc () - vcpu->arch.last_host_tsc;if (tsc_delta <0 )mark_tsc_unstable ("KVM discovered backwards TSC" ); -if (check_tsc_unstable ()) { +if (kvm_check_tsc_unstable ()) {u64 offset =kvm_compute_tsc_offset (vcpu, vcpu->arch.last_guest_tsc);kvm_vcpu_write_tsc_offset (vcpu, offset);
@@ -6110,9 +6153,9 @@ static int pvclock_gtod_notify(struct notifier_block *nb, unsigned long unused,update_pvclock_gtod (tk);/* disable master clock if host does not trust, or does not -* use, TSC clocksource +* use, TSC based clocksource. */ -if (gtod->clock.vclock_mode !=VCLOCK_TSC && +if (!gtod_is_based_on_tsc (gtod->clock.vclock_mode) &&atomic_read (&kvm_guest_has_master_clock) !=0 )queue_work (system_long_wq, &pvclock_gtod_work);
@@ -7767,7 +7810,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, {struct kvm_vcpu *vcpu; -if (check_tsc_unstable () &&atomic_read (&kvm->online_vcpus) !=0 ) +if (kvm_check_tsc_unstable () &&atomic_read (&kvm->online_vcpus) !=0 )printk_once (KERN_WARNING "kvm: SMP vm created on host with unstable TSC; " "guest TSC will not be reliable\n" );
@@ -7924,7 +7967,7 @@ int kvm_arch_hardware_enable(void)return ret; local_tsc =rdtsc (); - stable = !check_tsc_unstable (); + stable = !kvm_check_tsc_unstable ();list_for_each_entry (kvm, &vm_list, vm_list) {kvm_for_each_vcpu (i, vcpu, kvm) {if (!stable && vcpu->cpu ==smp_processor_id ())
Signature · 1 line
2.14.3
tip-bot for Vitaly Kuznetsov
merge bot[tip:x86/hyperv] x86/kvm: Pass stable clocksource to guests when running nested on Hyper-V
x86/kvm: Pass stable clocksource to guests when running nested on Hyper-V
Commit-ID: b0c39dc68e3b3d22bf9d2984f62f6c86788a49e7 Gitweb: https://git.kernel.org/tip/b0c39dc68e3b3d22bf9d2984f62f6c86788a49e7 Author: Vitaly Kuznetsov <[email protected]> AuthorDate: Wed, 24 Jan 2018 14:23:36 +0100 Committer: Thomas Gleixner <[email protected]> CommitDate: Tue, 30 Jan 2018 23:55:34 +0100
x86/kvm: Pass stable clocksource to guests when running nested on Hyper-V
Currently, KVM is able to work in 'masterclock' mode passing PVCLOCK_TSC_STABLE_BIT to guests when the clocksource which is used on the host is TSC.
When running nested on Hyper-V the guest normally uses a different one: TSC page which is resistant to TSC frequency changes on events like L1 migration. Add support for it in KVM.
The only non-trivial change is in vgettsc(): when updating the gtod copy both the clock readout and tsc value have to be updated now.
--- arch/x86/kvm/x86.c | 93 +++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 68 insertions(+), 25 deletions(-)
arch/x86/kvm/x86.c +68 -25
@@ -67,6 +67,7 @@#include <asm/pvclock.h> #include <asm/div64.h> #include <asm/irq_remapping.h> +#include <asm/mshyperv.h> #define CREATE_TRACE_POINTS #include "trace.h"
@@ -1377,6 +1378,11 @@ static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)return tsc; } +static inline int gtod_is_based_on_tsc (int mode) +{ +return mode ==VCLOCK_TSC || mode ==VCLOCK_HVCLOCK ; +} +static void kvm_track_tsc_matching (struct kvm_vcpu *vcpu) {#ifdef CONFIG_X86_64
@@ -1396,7 +1402,7 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu)* perform request to enable masterclock. */ if (ka->use_master_clock || - (gtod->clock.vclock_mode ==VCLOCK_TSC && vcpus_matched)) + (gtod_is_based_on_tsc (gtod->clock.vclock_mode) && vcpus_matched))kvm_make_request (KVM_REQ_MASTERCLOCK_UPDATE , vcpu); trace_kvm_track_tsc(vcpu->vcpu_id, ka->nr_vcpus_matched_tsc,
@@ -1459,6 +1465,19 @@ static void kvm_vcpu_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) vcpu->arch.tsc_offset = offset; } +static inline bool kvm_check_tsc_unstable (void ) +{ +#ifdef CONFIG_X86_64 +/* +* TSC is marked unstable when we're running on Hyper-V, +* 'TSC page' clocksource is good. +*/ +if (pvclock_gtod_data.clock.vclock_mode ==VCLOCK_HVCLOCK ) +return false; +#endif +return check_tsc_unstable (); +} +void kvm_write_tsc (struct kvm_vcpu *vcpu,struct msr_data *msr) {struct kvm *kvm = vcpu->kvm;
@@ -1504,7 +1523,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)*/ if (synchronizing && vcpu->arch.virtual_tsc_khz == kvm->arch.last_tsc_khz) { -if (!check_tsc_unstable ()) { +if (!kvm_check_tsc_unstable ()) { offset = kvm->arch.cur_tsc_offset;pr_debug ("kvm: matched tsc offset for %llu\n" , data); }else {
@@ -1604,18 +1623,43 @@ static u64 read_tsc(void)return last; } -static inline u64 vgettsc (u64 *cycle_now) +static inline u64 vgettsc (u64 *tsc_timestamp,int *mode) {long v;struct pvclock_gtod_data *gtod = &pvclock_gtod_data; +u64 tsc_pg_val; + +switch (gtod->clock.vclock_mode) { +case VCLOCK_HVCLOCK : + tsc_pg_val =hv_read_tsc_page_tsc (hv_get_tsc_page (), + tsc_timestamp); +if (tsc_pg_val !=U64_MAX ) { +/* TSC page valid */ + *mode =VCLOCK_HVCLOCK ; + v = (tsc_pg_val - gtod->clock.cycle_last) & + gtod->clock.mask; + }else { +/* TSC page invalid */ + *mode =VCLOCK_NONE ; + } +break ; +case VCLOCK_TSC : + *mode =VCLOCK_TSC ; + *tsc_timestamp =read_tsc (); + v = (*tsc_timestamp - gtod->clock.cycle_last) & + gtod->clock.mask; +break ; +default : + *mode =VCLOCK_NONE ; + } - *cycle_now =read_tsc (); +if (*mode ==VCLOCK_NONE ) + *tsc_timestamp = v =0 ; - v = (*cycle_now - gtod->clock.cycle_last) & gtod->clock.mask;return v * gtod->clock.mult; } -static int do_monotonic_boot (s64 *t,u64 *cycle_now) +static int do_monotonic_boot (s64 *t,u64 *tsc_timestamp) {struct pvclock_gtod_data *gtod = &pvclock_gtod_data;unsigned long seq;
@@ -1624,9 +1668,8 @@ static int do_monotonic_boot(s64 *t, u64 *cycle_now)do { seq =read_seqcount_begin (>od->seq); - mode = gtod->clock.vclock_mode; ns = gtod->nsec_base; - ns +=vgettsc (cycle_now); + ns +=vgettsc (tsc_timestamp, &mode); ns >>= gtod->clock.shift; ns += gtod->boot_ns; }while (unlikely (read_seqcount_retry (>od->seq, seq)));
@@ -1635,7 +1678,7 @@ static int do_monotonic_boot(s64 *t, u64 *cycle_now)return mode; } -static int do_realtime (struct timespec *ts,u64 *cycle_now) +static int do_realtime (struct timespec *ts,u64 *tsc_timestamp) {struct pvclock_gtod_data *gtod = &pvclock_gtod_data;unsigned long seq;
@@ -1644,10 +1687,9 @@ static int do_realtime(struct timespec *ts, u64 *cycle_now)do { seq =read_seqcount_begin (>od->seq); - mode = gtod->clock.vclock_mode; ts->tv_sec = gtod->wall_time_sec; ns = gtod->nsec_base; - ns +=vgettsc (cycle_now); + ns +=vgettsc (tsc_timestamp, &mode); ns >>= gtod->clock.shift; }while (unlikely (read_seqcount_retry (>od->seq, seq)));
@@ -1657,25 +1699,26 @@ static int do_realtime(struct timespec *ts, u64 *cycle_now) return mode; } -/* returns true if host is using tsc clocksource */ -static bool kvm_get_time_and_clockread (s64 *kernel_ns,u64 *cycle_now) +/* returns true if host is using TSC based clocksource */ +static bool kvm_get_time_and_clockread (s64 *kernel_ns,u64 *tsc_timestamp) {/* checked again under seqlock below */ -if (pvclock_gtod_data.clock.vclock_mode !=VCLOCK_TSC ) +if (!gtod_is_based_on_tsc (pvclock_gtod_data.clock.vclock_mode))return false; -return do_monotonic_boot (kernel_ns, cycle_now) ==VCLOCK_TSC ; +return gtod_is_based_on_tsc (do_monotonic_boot (kernel_ns, + tsc_timestamp)); } -/* returns true if host is using tsc clocksource */ +/* returns true if host is using TSC based clocksource */ static bool kvm_get_walltime_and_clockread (struct timespec *ts, -u64 *cycle_now) +u64 *tsc_timestamp) {/* checked again under seqlock below */ -if (pvclock_gtod_data.clock.vclock_mode !=VCLOCK_TSC ) +if (!gtod_is_based_on_tsc (pvclock_gtod_data.clock.vclock_mode))return false; -return do_realtime (ts, cycle_now) ==VCLOCK_TSC ; +return gtod_is_based_on_tsc (do_realtime (ts, tsc_timestamp)); }#endif
@@ -2869,13 +2912,13 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)kvm_make_request (KVM_REQ_CLOCK_UPDATE , vcpu); } -if (unlikely (vcpu->cpu != cpu) ||check_tsc_unstable ()) { +if (unlikely (vcpu->cpu != cpu) ||kvm_check_tsc_unstable ()) {s64 tsc_delta = !vcpu->arch.last_host_tsc ?0 :rdtsc () - vcpu->arch.last_host_tsc;if (tsc_delta <0 )mark_tsc_unstable ("KVM discovered backwards TSC" ); -if (check_tsc_unstable ()) { +if (kvm_check_tsc_unstable ()) {u64 offset =kvm_compute_tsc_offset (vcpu, vcpu->arch.last_guest_tsc);kvm_vcpu_write_tsc_offset (vcpu, offset);
@@ -6110,9 +6153,9 @@ static int pvclock_gtod_notify(struct notifier_block *nb, unsigned long unused,update_pvclock_gtod (tk);/* disable master clock if host does not trust, or does not -* use, TSC clocksource +* use, TSC based clocksource. */ -if (gtod->clock.vclock_mode !=VCLOCK_TSC && +if (!gtod_is_based_on_tsc (gtod->clock.vclock_mode) &&atomic_read (&kvm_guest_has_master_clock) !=0 )queue_work (system_long_wq, &pvclock_gtod_work);
@@ -7767,7 +7810,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, {struct kvm_vcpu *vcpu; -if (check_tsc_unstable () &&atomic_read (&kvm->online_vcpus) !=0 ) +if (kvm_check_tsc_unstable () &&atomic_read (&kvm->online_vcpus) !=0 )printk_once (KERN_WARNING "kvm: SMP vm created on host with unstable TSC; " "guest TSC will not be reliable\n" );
@@ -7924,7 +7967,7 @@ int kvm_arch_hardware_enable(void)return ret; local_tsc =rdtsc (); - stable = !check_tsc_unstable (); + stable = !kvm_check_tsc_unstable ();list_for_each_entry (kvm, &vm_list, vm_list) {kvm_for_each_vcpu (i, vcpu, kvm) {if (!stable && vcpu->cpu ==smp_processor_id ())
PATCH v4 7/7 x86/kvm: support Hyper-V reenlightenment
In reply to Vitaly KuznetsovWhen we run nested KVM on Hyper-V guests we need to update masterclocks for all guests when L1 migrates to a host with different TSC frequency. Implement the procedure in the following way:
- Pause all guests.
- Tell our host (Hyper-V) to stop emulating TSC accesses.
- Update our gtod copy, recompute clocks.
- Unpause all guests.
This is somewhat similar to cpufreq but we have two important differences:
we can only disable TSC emulation globally (on all CPUs) and we don't know the new TSC frequency until we turn the emulation off so we can't 'prepare' ourselves to the event.
---
v3 -> v4:
add static to kvm_hyperv_tsc_notifier() [kbuild robot]
--- arch/x86/kvm/x86.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
arch/x86/kvm/x86.c +45 -0
@@ -68,6 +68,7 @@#include <asm/div64.h> #include <asm/irq_remapping.h> #include <asm/mshyperv.h> +#include <asm/hypervisor.h> #define CREATE_TRACE_POINTS #include "trace.h"
@@ -5932,6 +5933,43 @@ static void tsc_khz_changed(void *data)__this_cpu_write (cpu_tsc_khz, khz); } +static void kvm_hyperv_tsc_notifier (void ) +{ +#ifdef CONFIG_X86_64 +struct kvm *kvm; +struct kvm_vcpu *vcpu; +int cpu; + +spin_lock (&kvm_lock); +list_for_each_entry (kvm, &vm_list, vm_list) +kvm_make_mclock_inprogress_request (kvm); + +hyperv_stop_tsc_emulation (); + +/* TSC frequency always matches when on Hyper-V */ +for_each_present_cpu (cpu) +per_cpu (cpu_tsc_khz, cpu) = tsc_khz; + kvm_max_guest_tsc_khz = tsc_khz; + +list_for_each_entry (kvm, &vm_list, vm_list) { +struct kvm_arch *ka = &kvm->arch; + +spin_lock (&ka->pvclock_gtod_sync_lock); + +pvclock_update_vm_gtod_copy (kvm); + +kvm_for_each_vcpu (cpu, vcpu, kvm) +kvm_make_request (KVM_REQ_CLOCK_UPDATE , vcpu); + +kvm_for_each_vcpu (cpu, vcpu, kvm) +kvm_clear_request (KVM_REQ_MCLOCK_INPROGRESS , vcpu); + +spin_unlock (&ka->pvclock_gtod_sync_lock); + } +spin_unlock (&kvm_lock); +#endif +} +static int kvmclock_cpufreq_notifier (struct notifier_block *nb,unsigned long val,void *data) {
@@ -6217,6 +6255,9 @@ int kvm_arch_init(void *opaque)kvm_lapic_init ();#ifdef CONFIG_X86_64 pvclock_gtod_register_notifier (&pvclock_gtod_notifier); + +if (x86_hyper_type ==X86_HYPER_MS_HYPERV ) +set_hv_tscchange_cb (kvm_hyperv_tsc_notifier);#endif return 0 ;
@@ -6229,6 +6270,10 @@ int kvm_arch_init(void *opaque)void kvm_arch_exit (void ) { +#ifdef CONFIG_X86_64 +if (x86_hyper_type ==X86_HYPER_MS_HYPERV ) +clear_hv_tscchange_cb (); +#endif kvm_lapic_exit ();perf_unregister_guest_info_callbacks (&kvm_guest_cbs);
Signature · 1 line
2.14.3
tip-bot for Vitaly Kuznetsov
merge bot[tip:x86/hyperv] x86/kvm: Support Hyper-V reenlightenment
x86/kvm: Support Hyper-V reenlightenment
Commit-ID: 0092e4346f49558e5fe5a927c6d78d401dc4ed73 Gitweb: https://git.kernel.org/tip/0092e4346f49558e5fe5a927c6d78d401dc4ed73 Author: Vitaly Kuznetsov <[email protected]> AuthorDate: Wed, 24 Jan 2018 14:23:37 +0100 Committer: Thomas Gleixner <[email protected]> CommitDate: Tue, 30 Jan 2018 23:55:34 +0100
x86/kvm: Support Hyper-V reenlightenment
When running nested KVM on Hyper-V guests its required to update masterclocks for all guests when L1 migrates to a host with different TSC frequency.
Implement the procedure in the following way:
- Pause all guests.
- Tell the host (Hyper-V) to stop emulating TSC accesses.
- Update the gtod copy, recompute clocks.
- Unpause all guests.
This is somewhat similar to cpufreq but there are two important differences:
- TSC emulation can only be disabled globally (on all CPUs)
- The new TSC frequency is not known until emulation is turned off so there is no way to 'prepare' for the event upfront.
--- arch/x86/kvm/x86.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
arch/x86/kvm/x86.c +45 -0
@@ -68,6 +68,7 @@#include <asm/div64.h> #include <asm/irq_remapping.h> #include <asm/mshyperv.h> +#include <asm/hypervisor.h> #define CREATE_TRACE_POINTS #include "trace.h"
@@ -5932,6 +5933,43 @@ static void tsc_khz_changed(void *data)__this_cpu_write (cpu_tsc_khz, khz); } +static void kvm_hyperv_tsc_notifier (void ) +{ +#ifdef CONFIG_X86_64 +struct kvm *kvm; +struct kvm_vcpu *vcpu; +int cpu; + +spin_lock (&kvm_lock); +list_for_each_entry (kvm, &vm_list, vm_list) +kvm_make_mclock_inprogress_request (kvm); + +hyperv_stop_tsc_emulation (); + +/* TSC frequency always matches when on Hyper-V */ +for_each_present_cpu (cpu) +per_cpu (cpu_tsc_khz, cpu) = tsc_khz; + kvm_max_guest_tsc_khz = tsc_khz; + +list_for_each_entry (kvm, &vm_list, vm_list) { +struct kvm_arch *ka = &kvm->arch; + +spin_lock (&ka->pvclock_gtod_sync_lock); + +pvclock_update_vm_gtod_copy (kvm); + +kvm_for_each_vcpu (cpu, vcpu, kvm) +kvm_make_request (KVM_REQ_CLOCK_UPDATE , vcpu); + +kvm_for_each_vcpu (cpu, vcpu, kvm) +kvm_clear_request (KVM_REQ_MCLOCK_INPROGRESS , vcpu); + +spin_unlock (&ka->pvclock_gtod_sync_lock); + } +spin_unlock (&kvm_lock); +#endif +} +static int kvmclock_cpufreq_notifier (struct notifier_block *nb,unsigned long val,void *data) {
@@ -6217,6 +6255,9 @@ int kvm_arch_init(void *opaque)kvm_lapic_init ();#ifdef CONFIG_X86_64 pvclock_gtod_register_notifier (&pvclock_gtod_notifier); + +if (x86_hyper_type ==X86_HYPER_MS_HYPERV ) +set_hv_tscchange_cb (kvm_hyperv_tsc_notifier);#endif return 0 ;
@@ -6229,6 +6270,10 @@ out:void kvm_arch_exit (void ) { +#ifdef CONFIG_X86_64 +if (x86_hyper_type ==X86_HYPER_MS_HYPERV ) +clear_hv_tscchange_cb (); +#endif kvm_lapic_exit ();perf_unregister_guest_info_callbacks (&kvm_guest_cbs);