Skip to contentSkip to conversation

Linux 4.15.1

DISCUSSION Greg KH 1 participant 2 messages Feb 4, 2018 Stable branch

lore
Share & tools
lore

Greg KH

author maintainer
#0 lore raw

I'm announcing the release of the 4.15.1 kernel.

All users of the 4.15 kernel series must upgrade.

The updated 4.15.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.15.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary

thanks,

greg k-h

------------

 Makefile                                               |    2 
 arch/x86/crypto/aesni-intel_asm.S                      |  199 ++++-------------
 arch/x86/crypto/aesni-intel_glue.c                     |   70 ++++-
 crypto/Kconfig                                         |    2 
 crypto/af_alg.c                                        |   10 
 crypto/sha3_generic.c                                  |    5 
 drivers/android/binder.c                               |   12 +
 drivers/android/binder_alloc.c                         |    2 
 drivers/bluetooth/hci_serdev.c                         |    1 
 drivers/crypto/inside-secure/safexcel_hash.c           |   56 +++-
 drivers/firmware/efi/Kconfig                           |    5 
 drivers/gpio/gpio-ath79.c                              |    3 
 drivers/gpio/gpio-iop.c                                |    4 
 drivers/gpio/gpio-stmpe.c                              |   20 -
 drivers/gpio/gpiolib.c                                 |    3 
 drivers/hid/wacom_sys.c                                |   24 +-
 drivers/hid/wacom_wac.c                                |   16 -
 drivers/iio/adc/stm32-adc.c                            |    3 
 drivers/iio/chemical/ccs811.c                          |   13 -
 drivers/input/rmi4/rmi_driver.c                        |   14 -
 drivers/input/rmi4/rmi_f03.c                           |   64 ++++-
 drivers/misc/mei/pci-me.c                              |    5 
 drivers/mtd/nand/denali_pci.c                          |    4 
 drivers/net/ethernet/intel/igb/igb_main.c              |    2 
 drivers/power/reset/zx-reboot.c                        |    4 
 drivers/scsi/aacraid/aachba.c                          |   15 -
 drivers/scsi/aacraid/commsup.c                         |    9 
 drivers/scsi/storvsc_drv.c                             |    4 
 drivers/spi/spi-imx.c                                  |   15 +
 drivers/staging/ccree/ssi_cipher.c                     |    1 
 drivers/staging/ccree/ssi_driver.c                     |    2 
 drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c    |    7 
 drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h    |    2 
 drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c |    6 
 drivers/tty/serial/8250/8250_dw.c                      |   30 +-
 drivers/tty/serial/8250/8250_of.c                      |    5 
 drivers/tty/serial/8250/8250_uniphier.c                |    5 
 drivers/tty/serial/imx.c                               |   14 -
 drivers/tty/tty_io.c                                   |    8 
 drivers/tty/tty_ldisc.c                                |    4 
 drivers/usb/class/cdc-acm.c                            |    5 
 drivers/usb/gadget/function/f_fs.c                     |    3 
 drivers/usb/gadget/udc/core.c                          |    2 
 drivers/usb/serial/Kconfig                             |    1 
 drivers/usb/serial/io_edgeport.c                       |    1 
 drivers/usb/serial/option.c                            |    5 
 drivers/usb/serial/pl2303.c                            |    1 
 drivers/usb/serial/pl2303.h                            |    1 
 drivers/usb/serial/usb-serial-simple.c                 |    7 
 drivers/usb/storage/uas.c                              |    7 
 include/linux/tty.h                                    |    2 
 lib/test_firmware.c                                    |    1 
 security/integrity/ima/ima_policy.c                    |    2 
 sound/pci/hda/patch_realtek.c                          |    6 
 tools/gpio/gpio-event-mon.c                            |    1 
 tools/usb/usbip/src/usbip_bind.c                       |    9 
 tools/usb/usbip/src/usbip_list.c                       |    9 
 57 files changed, 424 insertions(+), 309 deletions(-)

Aaron Armstrong Skomra (1):
HID: wacom: EKR: ensure devres groups at higher indexes are released

Andy Shevchenko (1):
serial: 8250_dw: Revert "Improve clock rate setting"

Antoine Tenart (2):
crypto: inside-secure - fix hash when length is a multiple of a block
crypto: inside-secure - avoid unmapping DMA memory that was not mapped

Ard Biesheuvel (1):
crypto: sha3-generic - fixes for alignment and big endian operation

Benjamin Herrenschmidt (1):
usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()

Dan Carpenter (1):
scsi: storvsc: missing error code in storvsc_probe()

Dmitry Eremin (1):
staging: lustre: separate a connection destroy from free struct kib_conn

Dmitry Torokhov (2):
Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
Input: synaptics-rmi4 - do not delete interrupt memory too early

Fabio Estevam (1):
serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS

Fabrice Gasnier (1):
iio: adc: stm32: fix scan of multiple channels with DMA

Ganesh Mahendran (1):
android: binder: use VM_ALLOC to get vm area

Gaurav Kohli (1):
tty: fix data race between tty_init_dev and flush of buf

Gilad Ben-Yossef (2):
staging: ccree: NULLify backup_info when unused
staging: ccree: fix fips event irq handling build

Greg Kroah-Hartman (2):
USB: serial: pl2303: new device id for Chilitag Linux 4.15.1

Hans de Goede (1):
USB: cdc-acm: Do not log urb submission errors on disconnect

Hauke Mehrtens (1):
crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH

Hemant Kumar (1):
usb: f_fs: Prevent gadget unbind if it is already unbound

Jason Gerecke (1):
HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events

Jesse Chan (4):
power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE
mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE

Jia-Ju Bai (1):
USB: serial: io_edgeport: fix possible sleep-in-atomic

Joel Stanley (1):
tools/gpio: Fix build error with musl libc

Johan Hovold (1):
USB: serial: simple: add Motorola Tetra driver

Junaid Shahid (2):
crypto: aesni - Fix out-of-bounds access of the data buffer in generic-gcm-aesni
crypto: aesni - Fix out-of-bounds access of the AAD buffer in generic-gcm-aesni

Linus Walleij (1):
gpio: Fix kernel stack leak to userspace

Lukas Wunner (1):
Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops

Lyude Paul (1):
igb: Free IRQs when device is hotplugged

Martijn Coenen (1):
ANDROID: binder: remove waitqueue when thread exits.

Masahiro Yamada (1):
serial: 8250_of: fix return code when probe function fails to get reset

Matthew Garrett (1):
x86/efi: Clarify that reset attack mitigation needs appropriate userspace

Mike Rapoport (1):
ima/policy: fix parsing of fsuuid

Narcisa Ana Maria Vasile (1):
iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels

OKAMOTO Yoshiaki (1):
usb: option: Add support for FS040U modem

Oliver Neukum (2):
CDC-ACM: apply quirk for card reader
usb: uas: unconditionally bring back host after reset

Patrice Chotard (1):
gpio: stmpe: i2c transfer are forbiden in atomic context

Raghava Aditya Renukunta (2):
scsi: aacraid: Fix udev inquiry race condition
scsi: aacraid: Fix hang in kdump

Sabrina Dubroca (2):
crypto: aesni - fix typo in generic_gcmaes_decrypt
crypto: aesni - add wrapper for generic gcm(aes)

Shuah Khan (2):
usbip: prevent bind loops on devices attached to vhci_hcd
usbip: list: don't list devices attached to vhci_hcd

Stefan Agner (1):
spi: imx: do not access registers while clocks disabled

Stephan Mueller (2):
crypto: aesni - handle zero length dst buffer
crypto: af_alg - whitelist mask and type

Takashi Iwai (1):
ALSA: hda - Reduce the suspend time consumption for ALC256

Tomas Winkler (1):
mei: me: allow runtime pm for platform with D0i3

Wei Yongjun (2):
serial: 8250_uniphier: fix error return code in uniphier_uart_probe()
test_firmware: fix missing unlock on error in config_num_requests_store()

author maintainer
#1 lore raw
Makefile +1 -1
index c8b8e902d5a4..af101b556ba0 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 15
-SUBLEVEL = 0
+SUBLEVEL = 1
 EXTRAVERSION =
 NAME = Fearless Coyote
 
arch/x86/crypto/aesni-intel_asm.S +57 -142

301 lines not on this page · raw message

arch/x86/crypto/aesni-intel_glue.c +56 -14

130 lines not on this page · raw message

crypto/Kconfig +1 -1
index f7911963bb79..9327fbfccf5a 100644
@@ -130,7 +130,7 @@ config CRYPTO_DH
 
 config CRYPTO_ECDH
 	tristate "ECDH algorithm"
-	select CRYTPO_KPP
+	select CRYPTO_KPP
 	select CRYPTO_RNG_DEFAULT
 	help
 	  Generic implementation of the ECDH algorithm
crypto/af_alg.c +6 -4
index 35d4dcea381f..5231f421ad00 100644
@@ -150,7 +150,7 @@ EXPORT_SYMBOL_GPL(af_alg_release_parent);
 
 static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 {
-	const u32 forbidden = CRYPTO_ALG_INTERNAL;
+	const u32 allowed = CRYPTO_ALG_KERN_DRIVER_ONLY;
 	struct sock *sk = sock->sk;
 	struct alg_sock *ask = alg_sk(sk);
 	struct sockaddr_alg *sa = (void *)uaddr;
@@ -158,6 +158,10 @@ static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 	void *private;
 	int err;
 
+	/* If caller uses non-allowed flag, return error. */
+	if ((sa->salg_feat & ~allowed) || (sa->salg_mask & ~allowed))
+		return -EINVAL;
+
 	if (sock->state == SS_CONNECTED)
 		return -EINVAL;
 
@@ -176,9 +180,7 @@ static int alg_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 	if (IS_ERR(type))
 		return PTR_ERR(type);
 
-	private = type->bind(sa->salg_name,
-			     sa->salg_feat & ~forbidden,
-			     sa->salg_mask & ~forbidden);
+	private = type->bind(sa->salg_name, sa->salg_feat, sa->salg_mask);
 	if (IS_ERR(private)) {
 		module_put(type->owner);
 		return PTR_ERR(private);
crypto/sha3_generic.c +3 -2
index 7e8ed96236ce..a68be626017c 100644
@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <crypto/sha3.h>
 #include <asm/byteorder.h>
+#include <asm/unaligned.h>
 
 #define KECCAK_ROUNDS 24
 
@@ -149,7 +150,7 @@ static int sha3_update(struct shash_desc *desc, const u8 *data,
 			unsigned int i;
 
 			for (i = 0; i < sctx->rsizw; i++)
-				sctx->st[i] ^= ((u64 *) src)[i];
+				sctx->st[i] ^= get_unaligned_le64(src + 8 * i);
 			keccakf(sctx->st);
 
 			done += sctx->rsiz;
@@ -174,7 +175,7 @@ static int sha3_final(struct shash_desc *desc, u8 *out)
 	sctx->buf[sctx->rsiz - 1] |= 0x80;
 
 	for (i = 0; i < sctx->rsizw; i++)
-		sctx->st[i] ^= ((u64 *) sctx->buf)[i];
+		sctx->st[i] ^= get_unaligned_le64(sctx->buf + 8 * i);
 
 	keccakf(sctx->st);
 
drivers/android/binder.c +12 -0
index a7ecfde66b7b..ec0917fb7cca 100644
@@ -4302,6 +4302,18 @@ static int binder_thread_release(struct binder_proc *proc,
 		if (t)
 			spin_lock(&t->lock);
 	}
+
+	/*
+	 * If this thread used poll, make sure we remove the waitqueue
+	 * from any epoll data structures holding it with POLLFREE.
+	 * waitqueue_active() is safe to use here because we're holding
+	 * the inner lock.
+	 */
+	if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
+	    waitqueue_active(&thread->wait)) {
+		wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
+	}
+
 	binder_inner_proc_unlock(thread->proc);
 
 	if (send_reply)
drivers/android/binder_alloc.c +1 -1
index 6f6f745605af..bef8c65af8fc 100644
@@ -666,7 +666,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc,
 		goto err_already_mapped;
 	}
 
-	area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
+	area = get_vm_area(vma->vm_end - vma->vm_start, VM_ALLOC);
 	if (area == NULL) {
 		ret = -ENOMEM;
 		failure_string = "get_vm_area";
drivers/bluetooth/hci_serdev.c +1 -0
index 71664b22ec9d..e0e6461b9200 100644
@@ -303,6 +303,7 @@ int hci_uart_register_device(struct hci_uart *hu,
 	hci_set_drvdata(hdev, hu);
 
 	INIT_WORK(&hu->write_work, hci_uart_write_work);
+	percpu_init_rwsem(&hu->proto_lock);
 
 	/* Only when vendor specific setup callback is provided, consider
 	 * the manufacturer information valid. This avoids filling in the
drivers/crypto/inside-secure/safexcel_hash.c +37 -19

90 lines not on this page · raw message

drivers/firmware/efi/Kconfig +4 -1
index 2b4c39fdfa91..86210f75d233 100644
@@ -159,7 +159,10 @@ config RESET_ATTACK_MITIGATION
 	  using the TCG Platform Reset Attack Mitigation specification. This
 	  protects against an attacker forcibly rebooting the system while it
 	  still contains secrets in RAM, booting another OS and extracting the
-	  secrets.
+	  secrets. This should only be enabled when userland is configured to
+	  clear the MemoryOverwriteRequest flag on clean shutdown after secrets
+	  have been evicted, since otherwise it will trigger even on clean
+	  reboots.
 
 endmenu
 
drivers/gpio/gpio-ath79.c +3 -0
index 5fad89dfab7e..3ae7c1876bf4 100644
@@ -324,3 +324,6 @@ static struct platform_driver ath79_gpio_driver = {
 };
 
 module_platform_driver(ath79_gpio_driver);
+
+MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
+MODULE_LICENSE("GPL v2");
drivers/gpio/gpio-iop.c +4 -0
index 98c7ff2a76e7..8d62db447ec1 100644
@@ -58,3 +58,7 @@ static int __init iop3xx_gpio_init(void)
 	return platform_driver_register(&iop3xx_gpio_driver);
 }
 arch_initcall(iop3xx_gpio_init);
+
+MODULE_DESCRIPTION("GPIO handling for Intel IOP3xx processors");
+MODULE_AUTHOR("Lennert Buytenhek <[email protected]>");
+MODULE_LICENSE("GPL");
drivers/gpio/gpio-stmpe.c +10 -10
index e6e5cca624a7..a365feff2377 100644
@@ -190,6 +190,16 @@ static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
 	};
 	int i, j;
 
+	/*
+	 * STMPE1600: to be able to get IRQ from pins,
+	 * a read must be done on GPMR register, or a write in
+	 * GPSR or GPCR registers
+	 */
+	if (stmpe->partnum == STMPE1600) {
+		stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
+		stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
+	}
+
 	for (i = 0; i < CACHE_NR_REGS; i++) {
 		/* STMPE801 and STMPE1600 don't have RE and FE registers */
 		if ((stmpe->partnum == STMPE801 ||
@@ -227,21 +237,11 @@ static void stmpe_gpio_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
-	struct stmpe *stmpe = stmpe_gpio->stmpe;
 	int offset = d->hwirq;
 	int regoffset = offset / 8;
 	int mask = BIT(offset % 8);
 
 	stmpe_gpio->regs[REG_IE][regoffset] |= mask;
-
-	/*
-	 * STMPE1600 workaround: to be able to get IRQ from pins,
-	 * a read must be done on GPMR register, or a write in
-	 * GPSR or GPCR registers
-	 */
-	if (stmpe->partnum == STMPE1600)
-		stmpe_reg_read(stmpe,
-			       stmpe->regs[STMPE_IDX_GPMR_LSB + regoffset]);
 }
 
 static void stmpe_dbg_show_one(struct seq_file *s,
drivers/gpio/gpiolib.c +3 -0
index 14532d9576e4..f6efcf94f6ad 100644
@@ -732,6 +732,9 @@ static irqreturn_t lineevent_irq_thread(int irq, void *p)
 	struct gpioevent_data ge;
 	int ret, level;
 
+	/* Do not leak kernel stack to userspace */
+	memset(&ge, 0, sizeof(ge));
+
 	ge.timestamp = ktime_get_real_ns();
 	level = gpiod_get_value_cansleep(le->desc);
 
drivers/hid/wacom_sys.c +12 -12
index ee71ad9b6cc1..76531796bd3c 100644
@@ -2347,23 +2347,23 @@ static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
 	int i;
 	unsigned long flags;
 
-	spin_lock_irqsave(&remote->remote_lock, flags);
-	remote->remotes[index].registered = false;
-	spin_unlock_irqrestore(&remote->remote_lock, flags);
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (remote->remotes[i].serial == serial) {
 
-	if (remote->remotes[index].battery.battery)
-		devres_release_group(&wacom->hdev->dev,
-				     &remote->remotes[index].battery.bat_desc);
+			spin_lock_irqsave(&remote->remote_lock, flags);
+			remote->remotes[i].registered = false;
+			spin_unlock_irqrestore(&remote->remote_lock, flags);
 
-	if (remote->remotes[index].group.name)
-		devres_release_group(&wacom->hdev->dev,
-				     &remote->remotes[index]);
+			if (remote->remotes[i].battery.battery)
+				devres_release_group(&wacom->hdev->dev,
+						     &remote->remotes[i].battery.bat_desc);
+
+			if (remote->remotes[i].group.name)
+				devres_release_group(&wacom->hdev->dev,
+						     &remote->remotes[i]);
 
-	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
-		if (remote->remotes[i].serial == serial) {
 			remote->remotes[i].serial = 0;
 			remote->remotes[i].group.name = NULL;
-			remote->remotes[i].registered = false;
 			remote->remotes[i].battery.battery = NULL;
 			wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN;
 		}
drivers/hid/wacom_wac.c +8 -8
index 16af6886e828..7dbff253c05c 100644
@@ -1924,7 +1924,6 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 	struct wacom_features *features = &wacom_wac->features;
 	unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
 	int i;
-	bool is_touch_on = value;
 	bool do_report = false;
 
 	/*
@@ -1969,16 +1968,17 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
 		break;
 
 	case WACOM_HID_WD_MUTE_DEVICE:
-		if (wacom_wac->shared->touch_input && value) {
-			wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on;
-			is_touch_on = wacom_wac->shared->is_touch_on;
-		}
-
-		/* fall through*/
 	case WACOM_HID_WD_TOUCHONOFF:
 		if (wacom_wac->shared->touch_input) {
+			bool *is_touch_on = &wacom_wac->shared->is_touch_on;
+
+			if (equivalent_usage == WACOM_HID_WD_MUTE_DEVICE && value)
+				*is_touch_on = !(*is_touch_on);
+			else if (equivalent_usage == WACOM_HID_WD_TOUCHONOFF)
+				*is_touch_on = value;
+
 			input_report_switch(wacom_wac->shared->touch_input,
-					    SW_MUTE_DEVICE, !is_touch_on);
+					    SW_MUTE_DEVICE, !(*is_touch_on));
 			input_sync(wacom_wac->shared->touch_input);
 		}
 		break;
drivers/iio/adc/stm32-adc.c +2 -1
index c9d96f935dba..cecf1e5b244c 100644
@@ -1315,6 +1315,7 @@ static int stm32_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val)
 {
 	struct stm32_adc *adc = iio_priv(indio_dev);
 	unsigned int watermark = STM32_DMA_BUFFER_SIZE / 2;
+	unsigned int rx_buf_sz = STM32_DMA_BUFFER_SIZE;
 
 	/*
 	 * dma cyclic transfers are used, buffer is split into two periods.
@@ -1323,7 +1324,7 @@ static int stm32_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val)
 	 * - one buffer (period) driver can push with iio_trigger_poll().
 	 */
 	watermark = min(watermark, val * (unsigned)(sizeof(u16)));
-	adc->rx_buf_sz = watermark * 2;
+	adc->rx_buf_sz = min(rx_buf_sz, watermark * 2 * adc->num_conv);
 
 	return 0;
 }
drivers/iio/chemical/ccs811.c +3 -10
index 97bce8345c6a..fbe2431f5b81 100644
@@ -96,7 +96,6 @@ static const struct iio_chan_spec ccs811_channels[] = {
 		.channel2 = IIO_MOD_CO2,
 		.modified = 1,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-				      BIT(IIO_CHAN_INFO_OFFSET) |
 				      BIT(IIO_CHAN_INFO_SCALE),
 		.scan_index = 0,
 		.scan_type = {
@@ -255,24 +254,18 @@ static int ccs811_read_raw(struct iio_dev *indio_dev,
 			switch (chan->channel2) {
 			case IIO_MOD_CO2:
 				*val = 0;
-				*val2 = 12834;
+				*val2 = 100;
 				return IIO_VAL_INT_PLUS_MICRO;
 			case IIO_MOD_VOC:
 				*val = 0;
-				*val2 = 84246;
-				return IIO_VAL_INT_PLUS_MICRO;
+				*val2 = 100;
+				return IIO_VAL_INT_PLUS_NANO;
 			default:
 				return -EINVAL;
 			}
 		default:
 			return -EINVAL;
 		}
-	case IIO_CHAN_INFO_OFFSET:
-		if (!(chan->type == IIO_CONCENTRATION &&
-		      chan->channel2 == IIO_MOD_CO2))
-			return -EINVAL;
-		*val = -400;
-		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
 	}
drivers/input/rmi4/rmi_driver.c +7 -7
index 141ea228aac6..f5954981e9ee 100644
@@ -41,6 +41,13 @@ void rmi_free_function_list(struct rmi_device *rmi_dev)
 
 	rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
 
+	/* Doing it in the reverse order so F01 will be removed last */
+	list_for_each_entry_safe_reverse(fn, tmp,
+					 &data->function_list, node) {
+		list_del(&fn->node);
+		rmi_unregister_function(fn);
+	}
+
 	devm_kfree(&rmi_dev->dev, data->irq_memory);
 	data->irq_memory = NULL;
 	data->irq_status = NULL;
@@ -50,13 +57,6 @@ void rmi_free_function_list(struct rmi_device *rmi_dev)
 
 	data->f01_container = NULL;
 	data->f34_container = NULL;
-
-	/* Doing it in the reverse order so F01 will be removed last */
-	list_for_each_entry_safe_reverse(fn, tmp,
-					 &data->function_list, node) {
-		list_del(&fn->node);
-		rmi_unregister_function(fn);
-	}
 }
 
 static int reset_one_function(struct rmi_function *fn)
drivers/input/rmi4/rmi_f03.c +54 -10

111 lines not on this page · raw message

drivers/misc/mei/pci-me.c +4 -1
index f4f17552c9b8..4a0ccda4d04b 100644
@@ -238,8 +238,11 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	mei_me_set_pm_domain(dev);
 
-	if (mei_pg_is_enabled(dev))
+	if (mei_pg_is_enabled(dev)) {
 		pm_runtime_put_noidle(&pdev->dev);
+		if (hw->d0i3_supported)
+			pm_runtime_allow(&pdev->dev);
+	}
 
 	dev_dbg(&pdev->dev, "initialization successful.\n");
 
drivers/mtd/nand/denali_pci.c +4 -0
index 57fb7ae31412..49cb3e1f8bd0 100644
@@ -125,3 +125,7 @@ static struct pci_driver denali_pci_driver = {
 	.remove = denali_pci_remove,
 };
 module_pci_driver(denali_pci_driver);
+
+MODULE_DESCRIPTION("PCI driver for Denali NAND controller");
+MODULE_AUTHOR("Intel Corporation and its suppliers");
+MODULE_LICENSE("GPL v2");
drivers/net/ethernet/intel/igb/igb_main.c +1 -1
index c208753ff5b7..c69a5b3ae8c8 100644
@@ -3676,7 +3676,7 @@ static int __igb_close(struct net_device *netdev, bool suspending)
 
 int igb_close(struct net_device *netdev)
 {
-	if (netif_device_present(netdev))
+	if (netif_device_present(netdev) || netdev->dismantle)
 		return __igb_close(netdev, false);
 	return 0;
 }
drivers/power/reset/zx-reboot.c +4 -0
index 7549c7f74a3c..c03e96e6a041 100644
@@ -82,3 +82,7 @@ static struct platform_driver zx_reboot_driver = {
 	},
 };
 module_platform_driver(zx_reboot_driver);
+
+MODULE_DESCRIPTION("ZTE SoCs reset driver");
+MODULE_AUTHOR("Jun Nie <[email protected]>");
+MODULE_LICENSE("GPL v2");
drivers/scsi/aacraid/aachba.c +11 -4
index af3e4d3f9735..7173ae53c526 100644
@@ -913,8 +913,15 @@ static void setinqstr(struct aac_dev *dev, void *data, int tindex)
 	memset(str, ' ', sizeof(*str));
 
 	if (sup_adap_info->adapter_type_text[0]) {
-		char *cp = sup_adap_info->adapter_type_text;
 		int c;
+		char *cp;
+		char *cname = kmemdup(sup_adap_info->adapter_type_text,
+				sizeof(sup_adap_info->adapter_type_text),
+								GFP_ATOMIC);
+		if (!cname)
+			return;
+
+		cp = cname;
 		if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C'))
 			inqstrcpy("SMC", str->vid);
 		else {
@@ -923,7 +930,7 @@ static void setinqstr(struct aac_dev *dev, void *data, int tindex)
 				++cp;
 			c = *cp;
 			*cp = '\0';
-			inqstrcpy(sup_adap_info->adapter_type_text, str->vid);
+			inqstrcpy(cname, str->vid);
 			*cp = c;
 			while (*cp && *cp != ' ')
 				++cp;
@@ -937,8 +944,8 @@ static void setinqstr(struct aac_dev *dev, void *data, int tindex)
 			cp[sizeof(str->pid)] = '\0';
 		}
 		inqstrcpy (cp, str->pid);
-		if (c)
-			cp[sizeof(str->pid)] = c;
+
+		kfree(cname);
 	} else {
 		struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype);
 
drivers/scsi/aacraid/commsup.c +1 -8
index 80a8cb26cdea..d9b20dada109 100644
@@ -1643,14 +1643,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced, u8 reset_type)
 out:
 	aac->in_reset = 0;
 	scsi_unblock_requests(host);
-	/*
-	 * Issue bus rescan to catch any configuration that might have
-	 * occurred
-	 */
-	if (!retval) {
-		dev_info(&aac->pdev->dev, "Issuing bus rescan\n");
-		scsi_scan_host(host);
-	}
+
 	if (jafo) {
 		spin_lock_irq(host->host_lock);
 	}
drivers/scsi/storvsc_drv.c +3 -1
index 3b3d1d050cac..40fc7a590e81 100644
@@ -1834,8 +1834,10 @@ static int storvsc_probe(struct hv_device *device,
 		fc_host_node_name(host) = stor_device->node_name;
 		fc_host_port_name(host) = stor_device->port_name;
 		stor_device->rport = fc_remote_port_add(host, 0, &ids);
-		if (!stor_device->rport)
+		if (!stor_device->rport) {
+			ret = -ENOMEM;
 			goto err_out4;
+		}
 	}
 #endif
 	return 0;
drivers/spi/spi-imx.c +13 -2
index 79ddefe4180d..40390d31a93b 100644
@@ -1668,12 +1668,23 @@ static int spi_imx_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+	int ret;
 
 	spi_bitbang_stop(&spi_imx->bitbang);
 
+	ret = clk_enable(spi_imx->clk_per);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(spi_imx->clk_ipg);
+	if (ret) {
+		clk_disable(spi_imx->clk_per);
+		return ret;
+	}
+
 	writel(0, spi_imx->base + MXC_CSPICTRL);
-	clk_unprepare(spi_imx->clk_ipg);
-	clk_unprepare(spi_imx->clk_per);
+	clk_disable_unprepare(spi_imx->clk_ipg);
+	clk_disable_unprepare(spi_imx->clk_per);
 	spi_imx_sdma_exit(spi_imx);
 	spi_master_put(master);
 
drivers/staging/ccree/ssi_cipher.c +1 -0
index ee85cbf7c9ae..980ff42128b4 100644
@@ -908,6 +908,7 @@ static int ssi_ablkcipher_decrypt(struct ablkcipher_request *req)
 	scatterwalk_map_and_copy(req_ctx->backup_info, req->src,
 				 (req->nbytes - ivsize), ivsize, 0);
 	req_ctx->is_giv = false;
+	req_ctx->backup_info = NULL;
 
 	return ssi_blkcipher_process(tfm, req_ctx, req->dst, req->src, req->nbytes, req->info, ivsize, (void *)req, DRV_CRYPTO_DIRECTION_DECRYPT);
 }
drivers/staging/ccree/ssi_driver.c +1 -1
index 1a3c481fa92a..ce16c3440319 100644
@@ -117,7 +117,7 @@ static irqreturn_t cc_isr(int irq, void *dev_id)
 		irr &= ~SSI_COMP_IRQ_MASK;
 		complete_request(drvdata);
 	}
-#ifdef CC_SUPPORT_FIPS
+#ifdef CONFIG_CRYPTO_FIPS
 	/* TEE FIPS interrupt */
 	if (likely((irr & SSI_GPR0_IRQ_MASK) != 0)) {
 		/* Mask interrupt - will be unmasked in Deferred service handler */
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c +3 -4
index 8024843521ab..7b256d716251 100644
@@ -826,14 +826,15 @@ struct kib_conn *kiblnd_create_conn(struct kib_peer *peer, struct rdma_cm_id *cm
 	return conn;
 
  failed_2:
-	kiblnd_destroy_conn(conn, true);
+	kiblnd_destroy_conn(conn);
+	LIBCFS_FREE(conn, sizeof(*conn));
  failed_1:
 	LIBCFS_FREE(init_qp_attr, sizeof(*init_qp_attr));
  failed_0:
 	return NULL;
 }
 
-void kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn)
+void kiblnd_destroy_conn(struct kib_conn *conn)
 {
 	struct rdma_cm_id *cmid = conn->ibc_cmid;
 	struct kib_peer *peer = conn->ibc_peer;
@@ -896,8 +897,6 @@ void kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn)
 		rdma_destroy_id(cmid);
 		atomic_dec(&net->ibn_nconns);
 	}
-
-	LIBCFS_FREE(conn, sizeof(*conn));
 }
 
 int kiblnd_close_peer_conns_locked(struct kib_peer *peer, int why)
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h +1 -1
index 171eced213f8..b18911d09e9a 100644
@@ -1016,7 +1016,7 @@ int  kiblnd_close_peer_conns_locked(struct kib_peer *peer, int why);
 struct kib_conn *kiblnd_create_conn(struct kib_peer *peer,
 				    struct rdma_cm_id *cmid,
 				    int state, int version);
-void kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn);
+void kiblnd_destroy_conn(struct kib_conn *conn);
 void kiblnd_close_conn(struct kib_conn *conn, int error);
 void kiblnd_close_conn_locked(struct kib_conn *conn, int error);
 
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c +4 -2
index 40e3af5d8b04..2f25642ea1a6 100644
@@ -3314,11 +3314,13 @@ kiblnd_connd(void *arg)
 			spin_unlock_irqrestore(lock, flags);
 			dropped_lock = 1;
 
-			kiblnd_destroy_conn(conn, !peer);
+			kiblnd_destroy_conn(conn);
 
 			spin_lock_irqsave(lock, flags);
-			if (!peer)
+			if (!peer) {
+				kfree(conn);
 				continue;
+			}
 
 			conn->ibc_peer = peer;
 			if (peer->ibp_reconnected < KIB_RECONN_HIGH_RACE)
drivers/tty/serial/8250/8250_dw.c +12 -18
index 5bb0c42c88dd..7070203e3157 100644
@@ -252,31 +252,25 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 			       struct ktermios *old)
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
-	unsigned int target_rate, min_rate, max_rate;
 	struct dw8250_data *d = p->private_data;
 	long rate;
-	int i, ret;
+	int ret;
 
 	if (IS_ERR(d->clk) || !old)
 		goto out;
 
-	/* Find a clk rate within +/-1.6% of an integer multiple of baudx16 */
-	target_rate = baud * 16;
-	min_rate = target_rate - (target_rate >> 6);
-	max_rate = target_rate + (target_rate >> 6);
-
-	for (i = 1; i <= UART_DIV_MAX; i++) {
-		rate = clk_round_rate(d->clk, i * target_rate);
-		if (rate >= i * min_rate && rate <= i * max_rate)
-			break;
-	}
-	if (i <= UART_DIV_MAX) {
-		clk_disable_unprepare(d->clk);
+	clk_disable_unprepare(d->clk);
+	rate = clk_round_rate(d->clk, baud * 16);
+	if (rate < 0)
+		ret = rate;
+	else if (rate == 0)
+		ret = -ENOENT;
+	else
 		ret = clk_set_rate(d->clk, rate);
-		clk_prepare_enable(d->clk);
-		if (!ret)
-			p->uartclk = rate;
-	}
+	clk_prepare_enable(d->clk);
+
+	if (!ret)
+		p->uartclk = rate;
 
 out:
 	p->status &= ~UPSTAT_AUTOCTS;
drivers/tty/serial/8250/8250_of.c +4 -1
index 1e67a7e4a5fd..160b8906d9b9 100644
@@ -136,8 +136,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	}
 
 	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
-	if (IS_ERR(info->rst))
+	if (IS_ERR(info->rst)) {
+		ret = PTR_ERR(info->rst);
 		goto err_dispose;
+	}
+
 	ret = reset_control_deassert(info->rst);
 	if (ret)
 		goto err_dispose;
drivers/tty/serial/8250/8250_uniphier.c +3 -2
index 45ef506293ae..28d88ccf5a0c 100644
@@ -250,12 +250,13 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 	up.dl_read = uniphier_serial_dl_read;
 	up.dl_write = uniphier_serial_dl_write;
 
-	priv->line = serial8250_register_8250_port(&up);
-	if (priv->line < 0) {
+	ret = serial8250_register_8250_port(&up);
+	if (ret < 0) {
 		dev_err(dev, "failed to register 8250 port\n");
 		clk_disable_unprepare(priv->clk);
 		return ret;
 	}
+	priv->line = ret;
 
 	platform_set_drvdata(pdev, priv);
 
drivers/tty/serial/imx.c +8 -6
index e4b3d9123a03..e9145ed0d6e7 100644
@@ -2238,12 +2238,14 @@ static void serial_imx_enable_wakeup(struct imx_port *sport, bool on)
 		val &= ~UCR3_AWAKEN;
 	writel(val, sport->port.membase + UCR3);
 
-	val = readl(sport->port.membase + UCR1);
-	if (on)
-		val |= UCR1_RTSDEN;
-	else
-		val &= ~UCR1_RTSDEN;
-	writel(val, sport->port.membase + UCR1);
+	if (sport->have_rtscts) {
+		val = readl(sport->port.membase + UCR1);
+		if (on)
+			val |= UCR1_RTSDEN;
+		else
+			val &= ~UCR1_RTSDEN;
+		writel(val, sport->port.membase + UCR1);
+	}
 }
 
 static int imx_serial_port_suspend_noirq(struct device *dev)
drivers/tty/tty_io.c +7 -1
index dc60aeea87d8..4b506f2d3522 100644
@@ -1323,6 +1323,9 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 			"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
 			__func__, tty->driver->name);
 
+	retval = tty_ldisc_lock(tty, 5 * HZ);
+	if (retval)
+		goto err_release_lock;
 	tty->port->itty = tty;
 
 	/*
@@ -1333,6 +1336,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 	retval = tty_ldisc_setup(tty, tty->link);
 	if (retval)
 		goto err_release_tty;
+	tty_ldisc_unlock(tty);
 	/* Return the tty locked so that it cannot vanish under the caller */
 	return tty;
 
@@ -1345,9 +1349,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 
 	/* call the tty release_tty routine to clean out this slot */
 err_release_tty:
-	tty_unlock(tty);
+	tty_ldisc_unlock(tty);
 	tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n",
 			     retval, idx);
+err_release_lock:
+	tty_unlock(tty);
 	release_tty(tty, idx);
 	return ERR_PTR(retval);
 }
drivers/tty/tty_ldisc.c +2 -2
index 24ec5c7e6b20..4e7946c0484b 100644
@@ -337,7 +337,7 @@ static inline void __tty_ldisc_unlock(struct tty_struct *tty)
 	ldsem_up_write(&tty->ldisc_sem);
 }
 
-static int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
+int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
 {
 	int ret;
 
@@ -348,7 +348,7 @@ static int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
 	return 0;
 }
 
-static void tty_ldisc_unlock(struct tty_struct *tty)
+void tty_ldisc_unlock(struct tty_struct *tty)
 {
 	clear_bit(TTY_LDISC_HALTED, &tty->flags);
 	__tty_ldisc_unlock(tty);
drivers/usb/class/cdc-acm.c +4 -1
index 8e0636c963a7..18bbe3fedb8b 100644
@@ -425,7 +425,7 @@ static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
 
 	res = usb_submit_urb(acm->read_urbs[index], mem_flags);
 	if (res) {
-		if (res != -EPERM) {
+		if (res != -EPERM && res != -ENODEV) {
 			dev_err(&acm->data->dev,
 				"urb %d failed submission with %d\n",
 				index, res);
@@ -1752,6 +1752,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
 	.driver_info = SINGLE_RX_URB, /* firmware bug */
 	},
+	{ USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */
+	.driver_info = SINGLE_RX_URB,
+	},
 	{ USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
drivers/usb/gadget/function/f_fs.c +2 -1
index b6cf5ab5a0a1..f9bd351637cd 100644
@@ -3700,7 +3700,8 @@ static void ffs_closed(struct ffs_data *ffs)
 	ci = opts->func_inst.group.cg_item.ci_parent->ci_parent;
 	ffs_dev_unlock();
 
-	unregister_gadget_item(ci);
+	if (test_bit(FFS_FL_BOUND, &ffs->flags))
+		unregister_gadget_item(ci);
 	return;
 done:
 	ffs_dev_unlock();
drivers/usb/gadget/udc/core.c +1 -1
index 1b3efb14aec7..ac0541529499 100644
@@ -912,7 +912,7 @@ int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
 		return 0;
 
 	/* "high bandwidth" works only at high speed */
-	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp_mult(desc) > 1)
 		return 0;
 
 	switch (type) {
drivers/usb/serial/Kconfig +1 -0
index a8d5f2e4878d..c66b93664d54 100644
@@ -63,6 +63,7 @@ config USB_SERIAL_SIMPLE
 		- Google USB serial devices
 		- HP4x calculators
 		- a number of Motorola phones
+		- Motorola Tetra devices
 		- Novatel Wireless GPS receivers
 		- Siemens USB/MPI adapter.
 		- ViVOtech ViVOpay USB device.
drivers/usb/serial/io_edgeport.c +0 -1
index 219265ce3711..17283f4b4779 100644
@@ -2282,7 +2282,6 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
 		/* something went wrong */
 		dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n",
 			__func__, status);
-		usb_kill_urb(urb);
 		usb_free_urb(urb);
 		atomic_dec(&CmdUrbs);
 		return status;
drivers/usb/serial/option.c +5 -0
index b6320e3be429..5db8ed517e0e 100644
@@ -380,6 +380,9 @@ static void option_instat_callback(struct urb *urb);
 #define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
 #define FOUR_G_SYSTEMS_PRODUCT_W100		0x9b01
 
+/* Fujisoft products */
+#define FUJISOFT_PRODUCT_FS040U			0x9b02
+
 /* iBall 3.5G connect wireless modem */
 #define IBALL_3_5G_CONNECT			0x9605
 
@@ -1894,6 +1897,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
 	  .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
 	},
+	{USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U),
+	 .driver_info = (kernel_ulong_t)&net_intf3_blacklist},
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
drivers/usb/serial/pl2303.c +1 -0
index 57ae832a49ff..46dd09da2434 100644
@@ -38,6 +38,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
drivers/usb/serial/pl2303.h +1 -0
index f98fd84890de..fcd72396a7b6 100644
@@ -12,6 +12,7 @@
 #define PL2303_PRODUCT_ID_DCU11		0x1234
 #define PL2303_PRODUCT_ID_PHAROS	0xaaa0
 #define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
+#define PL2303_PRODUCT_ID_CHILITAG	0xaaa8
 #define PL2303_PRODUCT_ID_ALDIGA	0x0611
 #define PL2303_PRODUCT_ID_MMX		0x0612
 #define PL2303_PRODUCT_ID_GPRS		0x0609
drivers/usb/serial/usb-serial-simple.c +7 -0
index 74172fe158df..4ef79e29cb26 100644
@@ -77,6 +77,11 @@ DEVICE(vivopay, VIVOPAY_IDS);
 	{ USB_DEVICE(0x22b8, 0x2c64) }	/* Motorola V950 phone */
 DEVICE(moto_modem, MOTO_IDS);
 
+/* Motorola Tetra driver */
+#define MOTOROLA_TETRA_IDS()			\
+	{ USB_DEVICE(0x0cad, 0x9011) }	/* Motorola Solutions TETRA PEI */
+DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
+
 /* Novatel Wireless GPS driver */
 #define NOVATEL_IDS()			\
 	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
@@ -107,6 +112,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&google_device,
 	&vivopay_device,
 	&moto_modem_device,
+	&motorola_tetra_device,
 	&novatel_gps_device,
 	&hp4x_device,
 	&suunto_device,
@@ -122,6 +128,7 @@ static const struct usb_device_id id_table[] = {
 	GOOGLE_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
+	MOTOROLA_TETRA_IDS(),
 	NOVATEL_IDS(),
 	HP4X_IDS(),
 	SUUNTO_IDS(),
drivers/usb/storage/uas.c +3 -4
index 5d04c40ee40a..3b1b9695177a 100644
@@ -1076,20 +1076,19 @@ static int uas_post_reset(struct usb_interface *intf)
 		return 0;
 
 	err = uas_configure_endpoints(devinfo);
-	if (err) {
+	if (err && err != ENODEV)
 		shost_printk(KERN_ERR, shost,
 			     "%s: alloc streams error %d after reset",
 			     __func__, err);
-		return 1;
-	}
 
+	/* we must unblock the host in every case lest we deadlock */
 	spin_lock_irqsave(shost->host_lock, flags);
 	scsi_report_bus_reset(shost, 0);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	scsi_unblock_requests(shost);
 
-	return 0;
+	return err ? 1 : 0;
 }
 
 static int uas_suspend(struct usb_interface *intf, pm_message_t message)
include/linux/tty.h +2 -0
index 7ac8ba208b1f..0a6c71e0ad01 100644
@@ -405,6 +405,8 @@ extern const char *tty_name(const struct tty_struct *tty);
 extern struct tty_struct *tty_kopen(dev_t device);
 extern void tty_kclose(struct tty_struct *tty);
 extern int tty_dev_name_to_number(const char *name, dev_t *number);
+extern int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout);
+extern void tty_ldisc_unlock(struct tty_struct *tty);
 #else
 static inline void tty_kref_put(struct tty_struct *tty)
 { }
lib/test_firmware.c +1 -0
index 64a4c76cba2b..e7008688769b 100644
@@ -371,6 +371,7 @@ static ssize_t config_num_requests_store(struct device *dev,
 	if (test_fw_config->reqs) {
 		pr_err("Must call release_all_firmware prior to changing config\n");
 		rc = -EINVAL;
+		mutex_unlock(&test_fw_mutex);
 		goto out;
 	}
 	mutex_unlock(&test_fw_mutex);
security/integrity/ima/ima_policy.c +1 -1
index ee4613fa5840..f19f4841a97a 100644
@@ -743,7 +743,7 @@ static int ima_parse_rule(char *rule, struct ima_rule_entry *entry)
 		case Opt_fsuuid:
 			ima_log_string(ab, "fsuuid", args[0].from);
 
-			if (uuid_is_null(&entry->fsuuid)) {
+			if (!uuid_is_null(&entry->fsuuid)) {
 				result = -EINVAL;
 				break;
 			}
sound/pci/hda/patch_realtek.c +4 -2
index 9aafc6c86132..1750e00c5bb4 100644
@@ -3154,11 +3154,13 @@ static void alc256_shutup(struct hda_codec *codec)
 	if (hp_pin_sense)
 		msleep(85);
 
+	/* 3k pull low control for Headset jack. */
+	/* NOTE: call this before clearing the pin, otherwise codec stalls */
+	alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
+
 	snd_hda_codec_write(codec, hp_pin, 0,
 			    AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
 
-	alc_update_coef_idx(codec, 0x46, 0, 3 << 12); /* 3k pull low control for Headset jack. */
-
 	if (hp_pin_sense)
 		msleep(100);
 
tools/gpio/gpio-event-mon.c +1 -0
index 1c14c2595158..4b36323ea64b 100644
@@ -23,6 +23,7 @@
 #include <getopt.h>
 #include <inttypes.h>
 #include <sys/ioctl.h>
+#include <sys/types.h>
 #include <linux/gpio.h>
 
 int monitor_device(const char *device_name,
tools/usb/usbip/src/usbip_bind.c +9 -0
index fa46141ae68b..e121cfb1746a 100644
@@ -144,6 +144,7 @@ static int bind_device(char *busid)
 	int rc;
 	struct udev *udev;
 	struct udev_device *dev;
+	const char *devpath;
 
 	/* Check whether the device with this bus ID exists. */
 	udev = udev_new();
@@ -152,8 +153,16 @@ static int bind_device(char *busid)
 		err("device with the specified bus ID does not exist");
 		return -1;
 	}
+	devpath = udev_device_get_devpath(dev);
 	udev_unref(udev);
 
+	/* If the device is already attached to vhci_hcd - bail out */
+	if (strstr(devpath, USBIP_VHCI_DRV_NAME)) {
+		err("bind loop detected: device: %s is attached to %s\n",
+		    devpath, USBIP_VHCI_DRV_NAME);
+		return -1;
+	}
+
 	rc = unbind_other(busid);
 	if (rc == UNBIND_ST_FAILED) {
 		err("could not unbind driver from device on busid %s", busid);
tools/usb/usbip/src/usbip_list.c +9 -0
index f1b38e866dd7..d65a9f444174 100644
@@ -187,6 +187,7 @@ static int list_devices(bool parsable)
 	const char *busid;
 	char product_name[128];
 	int ret = -1;
+	const char *devpath;
 
 	/* Create libudev context. */
 	udev = udev_new();
@@ -209,6 +210,14 @@ static int list_devices(bool parsable)
 		path = udev_list_entry_get_name(dev_list_entry);
 		dev = udev_device_new_from_syspath(udev, path);
 
+		/* Ignore devices attached to vhci_hcd */
+		devpath = udev_device_get_devpath(dev);
+		if (strstr(devpath, USBIP_VHCI_DRV_NAME)) {
+			dbg("Skip the device %s already attached to %s\n",
+			    devpath, USBIP_VHCI_DRV_NAME);
+			continue;
+		}
+
 		/* Get device information. */
 		idVendor = udev_device_get_sysattr_value(dev, "idVendor");
 		idProduct = udev_device_get_sysattr_value(dev, "idProduct");