Skip to contentSkip to conversation

tests/migration: Add source to PC boot block

PATCH Superseded Dr. David Alan Gilbert (git) 4 participants 6 messages Feb 5, 2018 – Feb 12, 2018

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 tests/migration: Add source to PC boot block

From: "Dr. David Alan Gilbert" <[email protected]>

The boot block used in the migration test is currently only shipped as a hex (with the source in the git commit message), change this to actually include the source.

A script is added to rebuild the header but the expectation is that the generated hex is shipped as well as the .s, so that there's no requirement to have just the right assembler etc.

---
 tests/migration-test.c                   | 48 +----------------
 tests/migration/rebuild-x86-bootblock.sh | 37 +++++++++++++
 tests/migration/x86-a-b-bootblock.h      | 51 ++++++++++++++++++
 tests/migration/x86-a-b-bootblock.s      | 92 ++++++++++++++++++++++++++++++++
 4 files changed, 182 insertions(+), 46 deletions(-)
 create mode 100755 tests/migration/rebuild-x86-bootblock.sh
 create mode 100644 tests/migration/x86-a-b-bootblock.h
 create mode 100644 tests/migration/x86-a-b-bootblock.s
tests/migration-test.c +2 -46
index 799e24ebc6..b1a11502f8 100644
@@ -79,57 +79,13 @@ static const char *tmpfs;
 /* A simple PC boot sector that modifies memory (1-100MB) quickly
  * outputing a 'B' every so often if it's still running.
  */
-unsigned char bootsect[] = {
-  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
-  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
-  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
-  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
-  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
-  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
-  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
-};
+#include "tests/migration/x86-a-b-bootblock.h"
 
 static void init_bootfile_x86(const char *bootpath)
 {
     FILE *bootfile = fopen(bootpath, "wb");
 
-    g_assert_cmpint(fwrite(bootsect, 512, 1, bootfile), ==, 1);
+    g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1);
     fclose(bootfile);
 }
 
tests/migration/rebuild-x86-bootblock.sh new file +37 -0
new file mode 100755
index 0000000000..c40f025e1a
@@ -0,0 +1,37 @@
+#!/bin/sh
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+
+ASMFILE=tests/migration/x86-a-b-bootblock.s
+HEADER=tests/migration/x86-a-b-bootblock.h
+
+if [ ! -e "$ASMFILE" ]
+then
+  echo "Couldn't find $ASMFILE" >&2
+  exit 1
+fi
+
+ASM_WORK_DIR=/tmp/X86BB$$
+mkdir $ASM_WORK_DIR &&
+as --32 -march=i486 "$ASMFILE" -o $ASM_WORK_DIR/bb.o &&
+objcopy -O binary $ASM_WORK_DIR/bb.o $ASM_WORK_DIR/bb.boot &&
+dd if=$ASM_WORK_DIR/bb.boot of=$ASM_WORK_DIR/bb.bootsect \
+  bs=256 count=2 skip=124 &&
+xxd -i $ASM_WORK_DIR/bb.bootsect |
+sed -e 's/_tmp.*_bootsect/x86_bootsect/' -e 's/.*int.*//' > \
+  $ASM_WORK_DIR/bb.hex &&
+cat - $ASM_WORK_DIR/bb.hex <<HERE > "$HEADER"
+/* This file is automatically generated from
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+HERE
+
+rm $ASM_WORK_DIR/bb.hex $ASM_WORK_DIR/bb.bootsect $ASM_WORK_DIR/bb.boot
+rm $ASM_WORK_DIR/bb.o
+rmdir $ASM_WORK_DIR
+
tests/migration/x86-a-b-bootblock.h new file +51 -0

51 lines not on this page · raw message

tests/migration/x86-a-b-bootblock.s new file +92 -0

92 lines not on this page · raw message

Signature · 1 line
2.14.3
Reviewed-by Tested-by on v2 1/1
#1 lore raw
Quoted 274 lines · Dr. David Alan Gilbert (git)

From: "Dr. David Alan Gilbert" <[email protected]>

The boot block used in the migration test is currently only shipped as a hex (with the source in the git commit message), change this to actually include the source.

A script is added to rebuild the header but the expectation is that the generated hex is shipped as well as the .s, so that there's no requirement to have just the right assembler etc.

---
 tests/migration-test.c                   | 48 +----------------
 tests/migration/rebuild-x86-bootblock.sh | 37 +++++++++++++
 tests/migration/x86-a-b-bootblock.h      | 51 ++++++++++++++++++
 tests/migration/x86-a-b-bootblock.s      | 92 ++++++++++++++++++++++++++++++++
 4 files changed, 182 insertions(+), 46 deletions(-)
 create mode 100755 tests/migration/rebuild-x86-bootblock.sh
 create mode 100644 tests/migration/x86-a-b-bootblock.h
 create mode 100644 tests/migration/x86-a-b-bootblock.s
tests/migration-test.c +2 -46
index 799e24ebc6..b1a11502f8 100644
@@ -79,57 +79,13 @@ static const char *tmpfs;
 /* A simple PC boot sector that modifies memory (1-100MB) quickly
  * outputing a 'B' every so often if it's still running.
  */
-unsigned char bootsect[] = {
-  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
-  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
-  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
-  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
-  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
-  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
-  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
-  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
-};
+#include "tests/migration/x86-a-b-bootblock.h"
 
 static void init_bootfile_x86(const char *bootpath)
 {
     FILE *bootfile = fopen(bootpath, "wb");
 
-    g_assert_cmpint(fwrite(bootsect, 512, 1, bootfile), ==, 1);
+    g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1);
     fclose(bootfile);
 }
 
tests/migration/rebuild-x86-bootblock.sh new file +37 -0
new file mode 100755
index 0000000000..c40f025e1a
@@ -0,0 +1,37 @@
+#!/bin/sh
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+
+ASMFILE=tests/migration/x86-a-b-bootblock.s
+HEADER=tests/migration/x86-a-b-bootblock.h
+
+if [ ! -e "$ASMFILE" ]
+then
+  echo "Couldn't find $ASMFILE" >&2
+  exit 1
+fi
+
+ASM_WORK_DIR=/tmp/X86BB$$
+mkdir $ASM_WORK_DIR &&
+as --32 -march=i486 "$ASMFILE" -o $ASM_WORK_DIR/bb.o &&
+objcopy -O binary $ASM_WORK_DIR/bb.o $ASM_WORK_DIR/bb.boot &&
+dd if=$ASM_WORK_DIR/bb.boot of=$ASM_WORK_DIR/bb.bootsect \
+  bs=256 count=2 skip=124 &&
+xxd -i $ASM_WORK_DIR/bb.bootsect |
+sed -e 's/_tmp.*_bootsect/x86_bootsect/' -e 's/.*int.*//' > \
+  $ASM_WORK_DIR/bb.hex &&
+cat - $ASM_WORK_DIR/bb.hex <<HERE > "$HEADER"
+/* This file is automatically generated from
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+HERE
+
+rm $ASM_WORK_DIR/bb.hex $ASM_WORK_DIR/bb.bootsect $ASM_WORK_DIR/bb.boot
+rm $ASM_WORK_DIR/bb.o
+rmdir $ASM_WORK_DIR
+
tests/migration/x86-a-b-bootblock.h new file +51 -0
new file mode 100644
index 0000000000..78a151fe2a
@@ -0,0 +1,51 @@
+/* This file is automatically generated from
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+unsigned char x86_bootsect[] = {
+  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
+  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
+  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
+  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
+  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
+  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
+  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
+  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
+};
+
tests/migration/x86-a-b-bootblock.s new file +82 -0
new file mode 100644
index 0000000000..b1642641a7
@@ -0,0 +1,92 @@
+# x86 bootblock used in migration test
+#  repeatedly increments the first byte of each page in a 100MB
+#  range.
+#  Outputs an initial 'A' on serial followed by repeated 'B's
+#
+# run   tests/migration/rebuild-x86-bootblock.sh
+#   to regenerate the hex, and remember to include both the .h and .s
+#   in any patches.
+#
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+
+
+.code16
+.org 0x7c00
+        .file   "fill.s"
+        .text
+        .globl  start
+        .type   start, @function
+start:             # at 0x7c00 ?
+        cli
+        lgdt gdtdesc
+        mov $1,%eax
+        mov %eax,%cr0  # Protected mode enable
+        data32 ljmp $8,$0x7c20
+
+.org 0x7c20
+.code32
+        # A20 enable - not sure I actually need this
+        inb $0x92,%al
+        or  $2,%al
+        outb %al, $0x92
+
+        # set up DS for the whole of RAM (needed on KVM)
+        mov $16,%eax
+        mov %eax,%ds
+
+        mov $65,%ax
+        mov $0x3f8,%dx
+        outb %al,%dx
+
+        # bl keeps a counter so we limit the output speed
+        mov $0, %bl
+mainloop:
+        # Start from 1MB
+        mov $(1024*1024),%eax
+innerloop:
+        incb (%eax)
+        add $4096,%eax
+        cmp $(100*1024*1024),%eax
+        jl innerloop
+
+        inc %bl
+        jnz mainloop
+
+        mov $66,%ax
+        mov $0x3f8,%dx
+        outb %al,%dx
+
+        jmp mainloop
+
+        # GDT magic from old (GPLv2)  Grub startup.S
+        .p2align        2       /* force 4-byte alignment */
+gdt:
+        .word   0, 0
+        .byte   0, 0, 0, 0
+
+        /* -- code segment --
+         * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present
+         * type = 32bit code execute/read, DPL = 0
+         */
+        .word   0xFFFF, 0
+        .byte   0, 0x9A, 0xCF, 0
+
+        /* -- data segment --
+         * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present
+         * type = 32 bit data read/write, DPL = 0
+         */
+        .word   0xFFFF, 0

tests/migration/x86-a-b-bootblock.s line 92

Quoted 10 lines
tests/migration/x86-a-b-bootblock.s new file +10 -0
+        .byte   0, 0x92, 0xCF, 0
+
+gdtdesc:
+        .word   0x27                    /* limit */
+        .long   gdt                     /* addr */
+
+/* I'm a bootable disk */
+.org 0x7dfe
+        .byte 0x55
+        .byte 0xAA

I tested this patch and it worked on my x86 machine. Also using the same approach, I just submitted a new version of migration-test for aarch64. So,

#2 lore raw
In reply to Dr. David Alan Gilbert (git)
Quoted 13 lines · Dr. David Alan Gilbert (git)
tests/migration/rebuild-x86-bootblock.sh new file +7 -0
new file mode 100755
index 0000000000..c40f025e1a
@@ -0,0 +1,37 @@
+#!/bin/sh
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+

tests/migration/rebuild-x86-bootblock.sh line 17

Quoted 10 lines
tests/migration/rebuild-x86-bootblock.sh new file +10 -0
+ASMFILE=tests/migration/x86-a-b-bootblock.s
+HEADER=tests/migration/x86-a-b-bootblock.h
+
+if [ ! -e "$ASMFILE" ]
+then
+  echo "Couldn't find $ASMFILE" >&2
+  exit 1
+fi
+
+ASM_WORK_DIR=/tmp/X86BB$$

mktemp?

tests/migration/rebuild-x86-bootblock.sh line 23

Quoted 6 lines
tests/migration/rebuild-x86-bootblock.sh new file +6 -0
+mkdir $ASM_WORK_DIR &&
+as --32 -march=i486 "$ASMFILE" -o $ASM_WORK_DIR/bb.o &&
+objcopy -O binary $ASM_WORK_DIR/bb.o $ASM_WORK_DIR/bb.boot &&
+dd if=$ASM_WORK_DIR/bb.boot of=$ASM_WORK_DIR/bb.bootsect \
+  bs=256 count=2 skip=124 &&
+xxd -i $ASM_WORK_DIR/bb.bootsect |

Is xxd now considered a common enough tool for portable scripts? I've always liked xxd for manual use, but scripted with 'od'.

Quoted 4 lines
tests/migration/rebuild-x86-bootblock.sh new file +4 -0
+sed -e 's/_tmp.*_bootsect/x86_bootsect/' -e 's/.*int.*//' > \
+  $ASM_WORK_DIR/bb.hex &&
+cat - $ASM_WORK_DIR/bb.hex <<HERE > "$HEADER"
+/* This file is automatically generated from

tests/migration/rebuild-x86-bootblock.sh line 37

Quoted 10 lines
tests/migration/rebuild-x86-bootblock.sh new file +10 -0
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+HERE
+
+rm $ASM_WORK_DIR/bb.hex $ASM_WORK_DIR/bb.bootsect $ASM_WORK_DIR/bb.boot
+rm $ASM_WORK_DIR/bb.o
+rmdir $ASM_WORK_DIR
+

Thanks,
drew

#3 lore raw
Quoted 18 lines · * Andrew Jones ([email protected]) wrote:
Quoted 17 lines · Dr. David Alan Gilbert (git)
tests/migration/rebuild-x86-bootblock.sh new file +11 -0
new file mode 100755
index 0000000000..c40f025e1a
@@ -0,0 +1,37 @@
+#!/bin/sh
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+
+ASMFILE=tests/migration/x86-a-b-bootblock.s
+HEADER=tests/migration/x86-a-b-bootblock.h
+
+if [ ! -e "$ASMFILE" ]
Quoted 8 lines

tests/migration/rebuild-x86-bootblock.sh line 17

Quoted 6 lines
tests/migration/rebuild-x86-bootblock.sh new file +6 -0
+then
+  echo "Couldn't find $ASMFILE" >&2
+  exit 1
+fi
+
+ASM_WORK_DIR=/tmp/X86BB$$

mktemp?

Yes, that's probably fair.

Quoted 9 lines

tests/migration/rebuild-x86-bootblock.sh line 23

Quoted 6 lines
tests/migration/rebuild-x86-bootblock.sh new file +6 -0
+mkdir $ASM_WORK_DIR &&
+as --32 -march=i486 "$ASMFILE" -o $ASM_WORK_DIR/bb.o &&
+objcopy -O binary $ASM_WORK_DIR/bb.o $ASM_WORK_DIR/bb.boot &&
+dd if=$ASM_WORK_DIR/bb.boot of=$ASM_WORK_DIR/bb.bootsect \
+  bs=256 count=2 skip=124 &&
+xxd -i $ASM_WORK_DIR/bb.bootsect |

Is xxd now considered a common enough tool for portable scripts? I've always liked xxd for manual use, but scripted with 'od'.

This script isn't part of a normal build or make check or anything, so jumping through hoops to make it portable for the mythical other person who might ever run it seems OTT, especially since xxd is very common, and I'm not sure how much I'd bet on the portability of od's output format either.

Dave

Quoted 9 lines
Quoted 9 lines
tests/migration/rebuild-x86-bootblock.sh new file +9 -0
+sed -e 's/_tmp.*_bootsect/x86_bootsect/' -e 's/.*int.*//' > \
+  $ASM_WORK_DIR/bb.hex &&
+cat - $ASM_WORK_DIR/bb.hex <<HERE > "$HEADER"
+/* This file is automatically generated from
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+HERE
Quoted 8 lines

tests/migration/rebuild-x86-bootblock.sh line 37

Quoted 5 lines
tests/migration/rebuild-x86-bootblock.sh new file +5 -0
+
+rm $ASM_WORK_DIR/bb.hex $ASM_WORK_DIR/bb.bootsect $ASM_WORK_DIR/bb.boot
+rm $ASM_WORK_DIR/bb.o
+rmdir $ASM_WORK_DIR
+

Thanks,
drew

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK

#4 lore raw
Quoted 28 lines · Dr. David Alan Gilbert
Quoted 18 lines · * Andrew Jones ([email protected]) wrote:
Quoted 17 lines · Dr. David Alan Gilbert (git)
tests/migration/rebuild-x86-bootblock.sh new file +11 -0
new file mode 100755
index 0000000000..c40f025e1a
@@ -0,0 +1,37 @@
+#!/bin/sh
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: [email protected]
+
+ASMFILE=tests/migration/x86-a-b-bootblock.s
+HEADER=tests/migration/x86-a-b-bootblock.h
+
+if [ ! -e "$ASMFILE" ]
Quoted 8 lines

tests/migration/rebuild-x86-bootblock.sh line 17

Quoted 6 lines
tests/migration/rebuild-x86-bootblock.sh new file +6 -0
+then
+  echo "Couldn't find $ASMFILE" >&2
+  exit 1
+fi
+
+ASM_WORK_DIR=/tmp/X86BB$$

mktemp?

Quoted 1 line

Yes, that's probably fair.

I echo this. So we will use something like:

-ASM_WORK_DIR=/tmp/AARCH64BB$$
+ASM_WORK_DIR="$(mktemp -d /tmp/AARCH64XXXXXX)"

-mkdir $ASM_WORK_DIR &&

Quoted 11 lines
Quoted 10 lines

tests/migration/rebuild-x86-bootblock.sh line 23

Quoted 7 lines
tests/migration/rebuild-x86-bootblock.sh new file +6 -0
+mkdir $ASM_WORK_DIR &&
+as --32 -march=i486 "$ASMFILE" -o $ASM_WORK_DIR/bb.o &&
+objcopy -O binary $ASM_WORK_DIR/bb.o $ASM_WORK_DIR/bb.boot &&
+dd if=$ASM_WORK_DIR/bb.boot of=$ASM_WORK_DIR/bb.bootsect \
+  bs=256 count=2 skip=124 &&
+xxd -i $ASM_WORK_DIR/bb.bootsect |

Is xxd now considered a common enough tool for portable scripts? I've always liked xxd for manual use, but scripted with 'od'.

Quoted 3 lines

This script isn't part of a normal build or make check or anything, so jumping through hoops to make it portable for the mythical other person who might ever run it seems OTT, especially since xxd is very common,

xxd isn't installed by default (at least on my aarch64 server). But it is part of vim-common package; so it is fair to say xxd command is available on all major distros.

Quoted 25 lines

and I'm not sure how much I'd bet on the portability of od's output format either.

Dave

Quoted 9 lines
Quoted 9 lines
tests/migration/rebuild-x86-bootblock.sh new file +9 -0
+sed -e 's/_tmp.*_bootsect/x86_bootsect/' -e 's/.*int.*//' > \
+  $ASM_WORK_DIR/bb.hex &&
+cat - $ASM_WORK_DIR/bb.hex <<HERE > "$HEADER"
+/* This file is automatically generated from
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+HERE
Quoted 8 lines

tests/migration/rebuild-x86-bootblock.sh line 37

Quoted 5 lines
tests/migration/rebuild-x86-bootblock.sh new file +5 -0
+
+rm $ASM_WORK_DIR/bb.hex $ASM_WORK_DIR/bb.bootsect $ASM_WORK_DIR/bb.boot
+rm $ASM_WORK_DIR/bb.o
+rmdir $ASM_WORK_DIR
+

Thanks,
drew

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK

#5 lore raw
In reply to Dr. David Alan Gilbert
Quoted 9 lines · Dr. David Alan Gilbert
Quoted 3 lines

Is xxd now considered a common enough tool for portable scripts? I've always liked xxd for manual use, but scripted with 'od'.

This script isn't part of a normal build or make check or anything, so jumping through hoops to make it portable for the mythical other person who might ever run it seems OTT, especially since xxd is very common, and I'm not sure how much I'd bet on the portability of od's output format either.

Relying on xxd is okay given your arguments, but od IS portable (it is required by POSIX, and if you stick to the basics that POSIX documents, things are pretty consistent between implementations). I will grant, however, that a portable use of od has a much longer command line (with the options you need to turn on for saner output, because who reads octal these days) than xxd giving you hex by default.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org