Add gdb 8.1 support, switch to 8.0 as default, drop old versions
v2 cover Add gdb 8.1 support, switch to 8.0 as default, drop old versions
Hello,
This is just a respin of Romain's series on gdb, with only two changes, but somewhat important ones:
- An additional commit (first in the series) that reworks how the host and target gdb dependencies are handled. Indeed, switching to gdb 8.0 by default has a consequence, because it needs C++11 support in the toolchain, and that breaks with how the dependencies were currently expressed. See the commit log of PATCH 1 for details.
- In the patch bumping to 8.1, remove the MPFR handling that Romain
did: it was not correct to bring host-mpfr as a dependency for the host gdb when the target mpfr package was enabled. Since mpfr support in gdb for the target is not needed (it's only used when host != target), we don't support that and pass --without-mpfr. For the host, we also pass --without-mpfr, as we don't support this optional feature for the moment.
- The patch bumping to 8.1 is adjust afer the dependency changes.
- All other patches are unchanged.
Thomas
Romain Naour (4):
package/gdb: bump to version 8.1 package/gdb: switch to 8.0 as the default version package/gdb: remove 7.10
package/gdb: remove 7.11
Thomas Petazzoni (1):
package/gdb: rework dependency for C++11
Config.in.legacy | 14 ++++++++++++++ package/gdb/Config.in | 15 +++++++++++++++ package/gdb/Config.in.host | 21 ++++++++------------- package/gdb/gdb.hash | 3 +-- package/gdb/gdb.mk | 4 +++- 5 files changed, 41 insertions(+), 16 deletions(-)
Signature · 1 line
2.14.3
PATCH v2 1/5 package/gdb: rework dependency for C++11
As we are about to switch to 8.0 as the default gdb dependency, we need to adjust how the gdb dependencies are handled. Indeed, from 8.0 onwards, gdb needs a C++11 capable compiler, i.e at least gcc 4.8.
Until now, Config.in.host was making sure that gdb 8.0 was not selectable if the cross-compilation toolchain did not have C++ support with gcc >= 4.8. This worked fine because the default version of gdb, used as the target gdb version when no host gdb is built, was 7.11, and did not require C++11.
With the switch to 8.0 as the default version, when target gdb is enabled but not host gdb, 8.0 is used, which means we need a C++11 capable compiler. The dependencies in Config.in.host are no longer sufficient.
So instead, we remove the target-related dependencies from Config.in.host and move them properly to Config.in. The overall logic is the following:
- In Config.in.host, BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS ensures that we have at least host gcc 4.8 if we're on ARC, because the ARC gdb needs C++11. We remove the target toolchain related dependencies from here.
- In Config.in.host, the version selection ensures that 8.0 cannot be selected if the host toolchain does not have at least gcc 4.8. We remove the target toolchain related dependencies from here.
- In Config.in, we handle gdb more like a regular target package, with a Config.in comment when its dependencies are not met. A hidden boolean BR2_PACKAGE_GDB_NEEDS_CXX11 indicates when the currently selected version requires C++11. Based on that, we show the Config.in comment, and add the proper dependencies to BR2_PACKAGE_GDB. It is worth mentioning that BR2_PACKAGE_GDB_NEEDS_CXX11 is intentionally created to be !7.10 && !7.11 && !7.12 instead of 8.0, because we will gradually add more C++11-requiring versions, and remove non-C++11-requiring versions.
--- package/gdb/Config.in | 15 +++++++++++++++ package/gdb/Config.in.host | 3 --- 2 files changed, 15 insertions(+), 3 deletions(-)
package/gdb/Config.in +15 -0
@@ -11,15 +11,30 @@ comment "gdb/gdbserver needs a toolchain w/ threads, threads debug" depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_HAS_THREADS_DEBUG +config BR2_PACKAGE_GDB_NEEDS_CXX11 + bool + default y + depends on !BR2_GDB_VERSION_7_10 + depends on !BR2_GDB_VERSION_7_11 + depends on !BR2_GDB_VERSION_7_12 + +comment "gdb/gdbserver >= 8.x needs a toolchain w/ C++, gcc >= 4.8" + depends on BR2_PACKAGE_GDB_NEEDS_CXX11 + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 + config BR2_PACKAGE_GDB bool "gdb" depends on BR2_TOOLCHAIN_HAS_THREADS && BR2_TOOLCHAIN_HAS_THREADS_DEBUG depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 || !BR2_PACKAGE_GDB_NEEDS_CXX11 + depends on BR2_INSTALL_LIBSTDCPP || !BR2_PACKAGE_GDB_NEEDS_CXX11 # When the external toolchain gdbserver is copied to the # target, we don't allow building a separate gdbserver. The # one from the external toolchain should be used. select BR2_PACKAGE_GDB_SERVER if \ (!BR2_PACKAGE_GDB_DEBUGGER && !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY) + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 || !BR2_PACKAGE_GDB_NEEDS_CXX11 + depends on BR2_INSTALL_LIBSTDCPP || !BR2_PACKAGE_GDB_NEEDS_CXX11 help GDB, the GNU Project debugger, allows you to see what is going on `inside' another program while it executes -- or
package/gdb/Config.in.host +0 -3
@@ -3,7 +3,6 @@ config BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS default y # The ARC version needs C++11, thus gcc >= 4.8, like gdb-8.0.x depends on BR2_HOST_GCC_AT_LEAST_4_8 || !BR2_arc - depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 || !BR2_arc depends on !((BR2_arm || BR2_armeb) && BR2_BINFMT_FLAT) depends on !BR2_microblaze depends on !BR2_nios2
@@ -63,9 +62,7 @@ config BR2_GDB_VERSION_7_12 config BR2_GDB_VERSION_8_0 bool "gdb 8.0.x" # Needs a C++11 compiler - depends on BR2_INSTALL_LIBSTDCPP depends on BR2_HOST_GCC_AT_LEAST_4_8 - depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 endchoice
Signature · 1 line
2.14.3
PATCH v2 1/5 package/gdb: rework dependency for C++11
Thomas, All,
On 2018-02-05 22:10 +0100, Thomas Petazzoni spake thusly:
Quoted 28 lines
As we are about to switch to 8.0 as the default gdb dependency, we need to adjust how the gdb dependencies are handled. Indeed, from 8.0 onwards, gdb needs a C++11 capable compiler, i.e at least gcc 4.8.
Until now, Config.in.host was making sure that gdb 8.0 was not selectable if the cross-compilation toolchain did not have C++ support with gcc >= 4.8. This worked fine because the default version of gdb, used as the target gdb version when no host gdb is built, was 7.11, and did not require C++11.
With the switch to 8.0 as the default version, when target gdb is enabled but not host gdb, 8.0 is used, which means we need a C++11 capable compiler. The dependencies in Config.in.host are no longer sufficient.
So instead, we remove the target-related dependencies from Config.in.host and move them properly to Config.in. The overall logic is the following:
- In Config.in.host,
BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTSensures that we have at least host gcc 4.8 if we're on ARC, because the ARC gdb needs C++11. We remove the target toolchain related dependencies from here.- In Config.in.host, the version selection ensures that 8.0 cannot be selected if the host toolchain does not have at least gcc 4.8. We remove the target toolchain related dependencies from here.
Quoted 9 lines
- In Config.in, we handle gdb more like a regular target package, with a Config.in comment when its dependencies are not met. A hidden boolean
BR2_PACKAGE_GDB_NEEDS_CXX11indicates when the currently selected version requires C++11. Based on that, we show the Config.in comment, and add the proper dependencies toBR2_PACKAGE_GDB. It is worth mentioning thatBR2_PACKAGE_GDB_NEEDS_CXX11is intentionally created to be !7.10 && !7.11 && !7.12 instead of 8.0, because we will gradually add more C++11-requiring versions, and remove non-C++11-requiring versions.
Nice refactoring. :-)
Yet, a comment below...
Quoted 11 lines
Signed-off-by Thomas Petazzoni <[email protected]>--- package/gdb/Config.in | 15 +++++++++++++++ package/gdb/Config.in.host | 3 --- 2 files changed, 15 insertions(+), 3 deletions(-)package/gdb/Config.in +0
-0
package/gdb/Config.in comment "gdb/gdbserver needs a toolchain w/ threads, threads debug" · line 19
Quoted 9 lines
package/gdb/Config.in +6
-0@@ -11,15 +11,30 @@ comment "gdb/gdbserver needs a toolchain w/ threads, threads debug" depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_HAS_THREADS_DEBUG +config BR2_PACKAGE_GDB_NEEDS_CXX11 + bool + default y + depends on !BR2_GDB_VERSION_7_10 + depends on !BR2_GDB_VERSION_7_11 + depends on !BR2_GDB_VERSION_7_12
I would have expected that the various versions would select this, i.e. something like:
config BR2_PACKAGE_GDB_NEEDS_CXX11
bool
config BR2_GDB_VERSION_7_10
bool "7.10"
config BR2_GDB_VERSION_8_0
bool "8.0"
select BR2_PACKAGE_GDB_NEEDS_CXX11Otherwise, I'm OK with the patch.
Regards,
Yann E. MORIN.
Quoted 45 lines
package/gdb/Config.in +8
-0+comment "gdb/gdbserver >= 8.x needs a toolchain w/ C++, gcc >= 4.8" + depends on BR2_PACKAGE_GDB_NEEDS_CXX11 + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 + config BR2_PACKAGE_GDB bool "gdb" depends on BR2_TOOLCHAIN_HAS_THREADS && BR2_TOOLCHAIN_HAS_THREADS_DEBUG depends on BR2_PACKAGE_GDB_ARCH_SUPPORTS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 || !BR2_PACKAGE_GDB_NEEDS_CXX11 + depends on BR2_INSTALL_LIBSTDCPP || !BR2_PACKAGE_GDB_NEEDS_CXX11 # When the external toolchain gdbserver is copied to the # target, we don't allow building a separate gdbserver. The # one from the external toolchain should be used. select BR2_PACKAGE_GDB_SERVER if \ (!BR2_PACKAGE_GDB_DEBUGGER && !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY) + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 || !BR2_PACKAGE_GDB_NEEDS_CXX11 + depends on BR2_INSTALL_LIBSTDCPP || !BR2_PACKAGE_GDB_NEEDS_CXX11 help GDB, the GNU Project debugger, allows you to see what is going on `inside' another program while it executes -- orpackage/gdb/Config.in.host +0
-3@@ -3,7 +3,6 @@ config BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS default y # The ARC version needs C++11, thus gcc >= 4.8, like gdb-8.0.x depends on BR2_HOST_GCC_AT_LEAST_4_8 || !BR2_arc - depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 || !BR2_arc depends on !((BR2_arm || BR2_armeb) && BR2_BINFMT_FLAT) depends on !BR2_microblaze depends on !BR2_nios2@@ -63,9 +62,7 @@ config BR2_GDB_VERSION_7_12 config BR2_GDB_VERSION_8_0 bool "gdb 8.0.x" # Needs a C++11 compiler - depends on BR2_INSTALL_LIBSTDCPP depends on BR2_HOST_GCC_AT_LEAST_4_8 - depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 endchoiceSignature · 1 line
2.14.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v2 1/5 package/gdb: rework dependency for C++11
Hello,
Quoted 11 lines · Yann E. MORIN
Quoted 9 lines
- In Config.in, we handle gdb more like a regular target package, with a Config.in comment when its dependencies are not met. A hidden boolean
BR2_PACKAGE_GDB_NEEDS_CXX11indicates when the currently selected version requires C++11. Based on that, we show the Config.in comment, and add the proper dependencies toBR2_PACKAGE_GDB. It is worth mentioning thatBR2_PACKAGE_GDB_NEEDS_CXX11is intentionally created to be !7.10 && !7.11 && !7.12 instead of 8.0, because we will gradually add more C++11-requiring versions, and remove non-C++11-requiring versions.Nice refactoring. :-)
Thanks!
Quoted 10 lines
package/gdb/Config.in comment "gdb/gdbserver needs a toolchain w/ threads, threads debug" · line 19
Quoted 6 lines
package/gdb/Config.in +6
-0+config BR2_PACKAGE_GDB_NEEDS_CXX11 + bool + default y + depends on !BR2_GDB_VERSION_7_10 + depends on !BR2_GDB_VERSION_7_11 + depends on !BR2_GDB_VERSION_7_12I would have expected that the various versions would select this, i.e. something like:
Quoted 10 lines
config BR2_PACKAGE_GDB_NEEDS_CXX11
bool
config BR2_GDB_VERSION_7_10
bool "7.10"
config BR2_GDB_VERSION_8_0
bool "8.0"
select BR2_PACKAGE_GDB_NEEDS_CXX11But this doesn't work; The BR2_GDB_VERSION_8_0 symbol is only enabled if we build a host variant of gdb. If we build just the target variant, then no version is selected at all, and therefore this symbol would not be selected.
So in fact, even my code is slightly wrong: it becomes correct once the default version of gdb is 8.0, but it is wrong when the default version is still 7.12 (which is the case at the time my patch is introduced).
Indeed, when my patch is introduced, 7.12 is the default gdb version, used if you build only the target gdb. When you build just the target gdb version, BR2_GDB_VERSION_7_12 is not enabled, and therefore BR2_PACKAGE_GDB_NEEDS_CXX11=y even if it's not true.
So I should adjust that. I could use the BR2_GDB_VERSION string option, which exists regardless of whether host gdb is enabled or not. Or I could rely on BR2_PACKAGE_HOST_GDB somehow.
Meh. This is crappy :)
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
PATCH v2 1/5 package/gdb: rework dependency for C++11
Thomas, All,
On 2018-02-07 13:36 +0100, Thomas Petazzoni spake thusly:
Quoted 1 line · Yann E. MORIN
[--SNIP--]
Quoted 16 lines
Quoted 16 lines
package/gdb/Config.in comment "gdb/gdbserver needs a toolchain w/ threads, threads debug" · line 19
Quoted 6 lines
package/gdb/Config.in +6
-0+config BR2_PACKAGE_GDB_NEEDS_CXX11 + bool + default y + depends on !BR2_GDB_VERSION_7_10 + depends on !BR2_GDB_VERSION_7_11 + depends on !BR2_GDB_VERSION_7_12I would have expected that the various versions would select this, i.e. something like:
config BR2_PACKAGE_GDB_NEEDS_CXX11 bool config BR2_GDB_VERSION_7_10 bool "7.10"
Quoted 8 lines
Quoted 3 lines
config BR2_GDB_VERSION_8_0 bool "8.0" select BR2_PACKAGE_GDB_NEEDS_CXX11But this doesn't work; The
BR2_GDB_VERSION_8_0symbol is only enabled if we build a host variant of gdb. If we build just the target variant, then no version is selected at all, and therefore this symbol would not be selected.
Gah, I missed that...
Quoted 9 lines
So in fact, even my code is slightly wrong: it becomes correct once the default version of gdb is 8.0, but it is wrong when the default version is still 7.12 (which is the case at the time my patch is introduced).
Indeed, when my patch is introduced, 7.12 is the default gdb version, used if you build only the target gdb. When you build just the target gdb version,
BR2_GDB_VERSION_7_12is not enabled, and therefore BR2_PACKAGE_GDB_NEEDS_CXX11=y even if it's not true.
Quoted 5 lines
So I should adjust that. I could use the
BR2_GDB_VERSIONstring option, which exists regardless of whether host gdb is enabled or not. Or I could rely onBR2_PACKAGE_HOST_GDBsomehow.Meh. This is crappy :)
OK, I think I have an idea about all this mess... But since I can have pretty weird ideas, I make no promise that it will materialise into something usefull...
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v2 1/5 package/gdb: rework dependency for C++11
Quoted 45 lines · Yann E. MORIN
Thomas, All,
On 2018-02-07 13:36 +0100, Thomas Petazzoni spake thusly:
Quoted 1 line · Yann E. MORIN
[--SNIP--]
Quoted 16 lines
Quoted 16 lines
package/gdb/Config.in comment "gdb/gdbserver needs a toolchain w/ threads, threads debug" · line 19
Quoted 6 lines
package/gdb/Config.in +6
-0+config BR2_PACKAGE_GDB_NEEDS_CXX11 + bool + default y + depends on !BR2_GDB_VERSION_7_10 + depends on !BR2_GDB_VERSION_7_11 + depends on !BR2_GDB_VERSION_7_12I would have expected that the various versions would select this, i.e. something like:
config BR2_PACKAGE_GDB_NEEDS_CXX11 bool config BR2_GDB_VERSION_7_10 bool "7.10"Quoted 8 lines
Quoted 3 lines
config BR2_GDB_VERSION_8_0 bool "8.0" select BR2_PACKAGE_GDB_NEEDS_CXX11But this doesn't work; The
BR2_GDB_VERSION_8_0symbol is only enabled if we build a host variant of gdb. If we build just the target variant, then no version is selected at all, and therefore this symbol would not be selected.Gah, I missed that...
Quoted 13 lines
So in fact, even my code is slightly wrong: it becomes correct once the default version of gdb is 8.0, but it is wrong when the default version is still 7.12 (which is the case at the time my patch is introduced).
Indeed, when my patch is introduced, 7.12 is the default gdb version, used if you build only the target gdb. When you build just the target gdb version,
BR2_GDB_VERSION_7_12is not enabled, and therefore BR2_PACKAGE_GDB_NEEDS_CXX11=y even if it's not true.So I should adjust that. I could use the
BR2_GDB_VERSIONstring option, which exists regardless of whether host gdb is enabled or not. Or I could rely onBR2_PACKAGE_HOST_GDBsomehow.
Quoted 5 lines
Quoted 1 line
Meh. This is crappy :)
OK, I think I have an idea about all this mess... But since I can have pretty weird ideas, I make no promise that it will materialise into something usefull...
Given this mess, let's ask the question: why do we need version selection to
begin with? For GCC I can still see it (it breaks things), for binutils maybe, but gdb? Has been pretty stable lately, no?
That said, the C++11 support is obviously problematic. Since we anyway have the
versioned gdb infrastructure in place now, I would remove the user-visible choice, but make an automatic choice based on the availability of C++11.
It still is a little tricky to express, since we want to use 7.12 when
(BR2_PACKAGE_GDB && !(BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 && BR2_INSTALL_LIBSTDCPP) || (BR2_PACKAGE_HOST_GDB && !BR2_HOST_GCC_AT_LEAST_4_8). Or we would have to allow varying the gdb version on host and target (which by the way *should* be OK, but may not be...).
So I messed around with gdb a bit, I noticed a couple of things.
- gdbserver really needs C++11; some of the shared files in the common directory are C++ files.
- host-gdb does not build gdbserver. So all the dependencies we have in host-gdb on the target's toolchain are phony. Or perhaps they are there just in case target gdb is selected as well, but then it's not expressed very well...
- With the above in mind, the depends on !BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY in host-gdb is definitely phony. Perhaps it should be in target gdb?
Bottom line, I think could be simplified a lot here by removing the version choice.
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
PATCH v2 1/5 package/gdb: rework dependency for C++11
Hello,
Quoted 4 lines · Arnout Vandecappelle
So I messed around with gdb a bit, I noticed a couple of things.
- gdbserver really needs C++11; some of the shared files in the common directory are C++ files.
Correct.
Quoted 3 lines
- host-gdb does not build gdbserver. So all the dependencies we have in host-gdb on the target's toolchain are phony. Or perhaps they are there just in case target gdb is selected as well, but then it's not expressed very well...
Those target toolchain dependencies in the host-gdb package where here to avoid selecting a wrong version of host-gdb (which affects the target gdb version) when the target toolchain does not have the required feature. For example, we would allow to select 8.0 only if the host toolchain *and* the target toolchain had C++11 support.
My PATCH 1/5 in this series is precisely here to rework that.
Quoted 1 line
Bottom line, I think could be simplified a lot here by removing the version choice.
Everything can be simplified with less options, it's pretty obvious. The question is whether having those options is useful :-)
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
PATCH v2 2/5 package/gdb: bump to version 8.1
In reply to Thomas PetazzoniFrom: Romain Naour <[email protected]>
https://sourceware.org/ml/gdb-announce/2018/msg00001.html
gdb 8.1 has a new optional dependency on mpfr, which according to the NEWS file:
GDB now uses the GNU MPFR library, if available, to emulate target floating-point arithmetic during expression evaluation when the target uses different floating-point formats than the host. At least version 3.1 of GNU MPFR is required.
So for the target gdb, this is unnecessary, and therefore we forcefully disable mpfr support by passing --without-mpfr.
For the host gdb, it would potentially be useful, but since it's a new feature that isn't essential, we for now keep it disabled as well. An option may be added later if needed.
--- package/gdb/Config.in.host | 6 ++++++ package/gdb/gdb.hash | 1 + package/gdb/gdb.mk | 4 +++- 3 files changed, 10 insertions(+), 1 deletion(-)
package/gdb/Config.in.host +6 -0
@@ -64,6 +64,11 @@ config BR2_GDB_VERSION_8_0 # Needs a C++11 compiler depends on BR2_HOST_GCC_AT_LEAST_4_8 +config BR2_GDB_VERSION_8_1 + bool "gdb 8.1.x" + # Needs a C++11 compiler + depends on BR2_HOST_GCC_AT_LEAST_4_8 + endchoice endif
@@ -76,4 +81,5 @@ config BR2_GDB_VERSION default "7.11.1" if BR2_GDB_VERSION_7_11 || !BR2_PACKAGE_HOST_GDB default "7.12.1" if BR2_GDB_VERSION_7_12 default "8.0.1" if BR2_GDB_VERSION_8_0 + default "8.1" if BR2_GDB_VERSION_8_1 depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDB
package/gdb/gdb.hash +1 -0
@@ -3,6 +3,7 @@ sha512 17a5138277a31685a5c2a841cb47ed9bc4626ea617b8ca77750513b300299f4fbbffe5049 sha512 f80ec6c8a0f0b54c8b945666e875809174402b7e121efb378ebac931a91f9a1cc0048568f8e2f42ae8ae2392ff8d144c2e51d41c7398935017450aaf29838360 gdb-7.11.1.tar.xz sha512 0ac8d0a495103611ef41167a08313a010dce6ca4c6d827cbe8558a0c1a1a8a6bfa53f1b7704251289cababbfaaf9e075550cdf741a54d6cd9ca3433d910efcd8 gdb-7.12.1.tar.xz sha512 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1 gdb-8.0.1.tar.xz +sha512 ffd82f415d7652d62dad1716c307836f594217a363429609beb7d70239e8bf06b73b393345b0e000796228e56681ed7656ac3c8be05e91d6d652ab0d5b1dc357 gdb-8.1.tar.xz # Locally calculated (fetched from Github) sha512 e57582766e7d510b26bea63606429e6289414c31c60e28fef24d3d82fa20fb5a1f92b3831fde53e4f7c178c9e099609d3292628cf921a99109e297af4e5f83d9 gdb-arc-2017.09-release-gdb.tar.gz
package/gdb/gdb.mk +3 -1
@@ -113,7 +113,8 @@ GDB_CONF_OPTS = \ --with-curses \ --without-included-gettext \ --disable-werror \ - --enable-static + --enable-static \ + --without-mpfr # When gdb is built as C++ application for ARC it segfaults at runtime # So we pass --disable-build-with-cxx config option to force gdb not to
@@ -200,6 +201,7 @@ HOST_GDB_CONF_OPTS = \ --disable-werror \ --without-included-gettext \ --with-curses \ + --without-mpfr \ $(GDB_DISABLE_BINUTILS_CONF_OPTS) ifeq ($(BR2_PACKAGE_HOST_GDB_TUI),y)
Signature · 1 line
2.14.3
PATCH v2 2/5 package/gdb: bump to version 8.1
Thomas, All,
On 2018-02-05 22:10 +0100, Thomas Petazzoni spake thusly:
Quoted 12 lines
From: Romain Naour <[email protected]>
https://sourceware.org/ml/gdb-announce/2018/msg00001.html
gdb 8.1 has a new optional dependency on mpfr, which according to the NEWS file:
GDB now uses the GNU MPFR library, if available, to emulate target floating-point arithmetic during expression evaluation when the target uses different floating-point formats than the host. At least version 3.1 of GNU MPFR is required.
Quoted 6 lines
So for the target gdb, this is unnecessary, and therefore we forcefully disable mpfr support by passing --without-mpfr.
For the host gdb, it would potentially be useful, but since it's a new feature that isn't essential, we for now keep it disabled as well. An option may be added later if needed.
Agreed.
Quoted 14 lines
Signed-off-by Romain Naour <[email protected]>[Thomas: change mpfr handling.]Signed-off-by Thomas Petazzoni <[email protected]>--- package/gdb/Config.in.host | 6 ++++++ package/gdb/gdb.hash | 1 + package/gdb/gdb.mk | 4 +++- 3 files changed, 10 insertions(+), 1 deletion(-)package/gdb/Config.in.host +0
-0
package/gdb/Config.in.host config BR2_GDB_VERSION_8_0 · line 70
Quoted 7 lines
package/gdb/Config.in.host +4
-0@@ -64,6 +64,11 @@ config BR2_GDB_VERSION_8_0 # Needs a C++11 compiler depends on BR2_HOST_GCC_AT_LEAST_4_8 +config BR2_GDB_VERSION_8_1 + bool "gdb 8.1.x" + # Needs a C++11 compiler + depends on BR2_HOST_GCC_AT_LEAST_4_8
And there you would have added:
select BR2_PACKAGE_GDB_NEEDS_CXX11
Otherwise;
Regards,
Yann E. MORIN.
Quoted 47 lines
package/gdb/Config.in.host +2
-0+ endchoice endif@@ -76,4 +81,5 @@ config BR2_GDB_VERSION default "7.11.1" if BR2_GDB_VERSION_7_11 || !BR2_PACKAGE_HOST_GDB default "7.12.1" if BR2_GDB_VERSION_7_12 default "8.0.1" if BR2_GDB_VERSION_8_0 + default "8.1" if BR2_GDB_VERSION_8_1 depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDBpackage/gdb/gdb.hash +1
-0@@ -3,6 +3,7 @@ sha512 17a5138277a31685a5c2a841cb47ed9bc4626ea617b8ca77750513b300299f4fbbffe5049 sha512 f80ec6c8a0f0b54c8b945666e875809174402b7e121efb378ebac931a91f9a1cc0048568f8e2f42ae8ae2392ff8d144c2e51d41c7398935017450aaf29838360 gdb-7.11.1.tar.xz sha512 0ac8d0a495103611ef41167a08313a010dce6ca4c6d827cbe8558a0c1a1a8a6bfa53f1b7704251289cababbfaaf9e075550cdf741a54d6cd9ca3433d910efcd8 gdb-7.12.1.tar.xz sha512 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1 gdb-8.0.1.tar.xz +sha512 ffd82f415d7652d62dad1716c307836f594217a363429609beb7d70239e8bf06b73b393345b0e000796228e56681ed7656ac3c8be05e91d6d652ab0d5b1dc357 gdb-8.1.tar.xz # Locally calculated (fetched from Github) sha512 e57582766e7d510b26bea63606429e6289414c31c60e28fef24d3d82fa20fb5a1f92b3831fde53e4f7c178c9e099609d3292628cf921a99109e297af4e5f83d9 gdb-arc-2017.09-release-gdb.tar.gzpackage/gdb/gdb.mk +3
-1@@ -113,7 +113,8 @@ GDB_CONF_OPTS = \ --with-curses \ --without-included-gettext \ --disable-werror \ - --enable-static + --enable-static \ + --without-mpfr # When gdb is built as C++ application for ARC it segfaults at runtime # So we pass --disable-build-with-cxx config option to force gdb not to@@ -200,6 +201,7 @@ HOST_GDB_CONF_OPTS = \ --disable-werror \ --without-included-gettext \ --with-curses \ + --without-mpfr \ $(GDB_DISABLE_BINUTILS_CONF_OPTS) ifeq ($(BR2_PACKAGE_HOST_GDB_TUI),y)Signature · 1 line
2.14.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v2 2/5 package/gdb: bump to version 8.1
Hello,
Quoted 8 lines · Yann E. MORIN
package/gdb/Config.in.host config BR2_GDB_VERSION_8_0 · line 70
Quoted 4 lines
package/gdb/Config.in.host +4
-0+config BR2_GDB_VERSION_8_1 + bool "gdb 8.1.x" + # Needs a C++11 compiler + depends on BR2_HOST_GCC_AT_LEAST_4_8And there you would have added:
select
BR2_PACKAGE_GDB_NEEDS_CXX11
No: see my reply to PATCH 1/5 to explain why this doesn't work :)
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
PATCH v2 3/5 package/gdb: switch to 8.0 as the default version
In reply to Thomas PetazzoniFrom: Romain Naour <[email protected]>
8.1 is around, 8.0 has already seen a point release, so it's time to make 8.0 the default version for gdb.
--- package/gdb/Config.in.host | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
package/gdb/Config.in.host +3 -3
@@ -45,7 +45,7 @@ config BR2_PACKAGE_HOST_GDB_SIM choice prompt "GDB debugger Version" - default BR2_GDB_VERSION_7_11 + default BR2_GDB_VERSION_8_0 depends on !BR2_arc help Select the version of gdb you wish to use.
@@ -78,8 +78,8 @@ config BR2_GDB_VERSION string default "arc-2017.09-release-gdb" if BR2_arc default "7.10.1" if BR2_GDB_VERSION_7_10 - default "7.11.1" if BR2_GDB_VERSION_7_11 || !BR2_PACKAGE_HOST_GDB + default "7.11.1" if BR2_GDB_VERSION_7_11 default "7.12.1" if BR2_GDB_VERSION_7_12 - default "8.0.1" if BR2_GDB_VERSION_8_0 + default "8.0.1" if BR2_GDB_VERSION_8_0 || !BR2_PACKAGE_HOST_GDB default "8.1" if BR2_GDB_VERSION_8_1 depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDB
Signature · 1 line
2.14.3
PATCH v2 3/5 package/gdb: switch to 8.0 as the default version
Thomas, Romain, All,
On 2018-02-05 22:10 +0100, Thomas Petazzoni spake thusly:
Quoted 7 lines
From: Romain Naour <[email protected]>
8.1 is around, 8.0 has already seen a point release, so it's time to make 8.0 the default version for gdb.
Signed-off-by Romain Naour <[email protected]>Signed-off-by Thomas Petazzoni <[email protected]>
Regards,
Yann E. MORIN.
Quoted 31 lines
--- package/gdb/Config.in.host | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)package/gdb/Config.in.host +3
-3@@ -45,7 +45,7 @@ config BR2_PACKAGE_HOST_GDB_SIM choice prompt "GDB debugger Version" - default BR2_GDB_VERSION_7_11 + default BR2_GDB_VERSION_8_0 depends on !BR2_arc help Select the version of gdb you wish to use.@@ -78,8 +78,8 @@ config BR2_GDB_VERSION string default "arc-2017.09-release-gdb" if BR2_arc default "7.10.1" if BR2_GDB_VERSION_7_10 - default "7.11.1" if BR2_GDB_VERSION_7_11 || !BR2_PACKAGE_HOST_GDB + default "7.11.1" if BR2_GDB_VERSION_7_11 default "7.12.1" if BR2_GDB_VERSION_7_12 - default "8.0.1" if BR2_GDB_VERSION_8_0 + default "8.0.1" if BR2_GDB_VERSION_8_0 || !BR2_PACKAGE_HOST_GDB default "8.1" if BR2_GDB_VERSION_8_1 depends on BR2_PACKAGE_GDB || BR2_PACKAGE_HOST_GDBSignature · 1 line
2.14.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v2 4/5 package/gdb: remove 7.10
In reply to Thomas PetazzoniFrom: Romain Naour <[email protected]>
Now that 8.1 has been added and 8.0 is the default version, let's remove the old 7.10 release.
--- Config.in.legacy | 7 +++++++ package/gdb/Config.in.host | 4 ---- package/gdb/gdb.hash | 1 - 3 files changed, 7 insertions(+), 5 deletions(-)
Config.in.legacy +7 -0
@@ -145,6 +145,13 @@ endif ############################################################################### comment "Legacy options removed in 2018.02" +config BR2_GDB_VERSION_7_10 + bool "gdb 7.10 has been removed" + select BR2_LEGACY + help + The 7.10 version of gdb has been removed. Use a newer version + instead. + config BR2_KERNEL_HEADERS_3_4 bool "kernel headers version 3.4.x are no longer supported" select BR2_KERNEL_HEADERS_4_1
package/gdb/Config.in.host +0 -4
@@ -50,9 +50,6 @@ choice help Select the version of gdb you wish to use. -config BR2_GDB_VERSION_7_10 - bool "gdb 7.10.x" - config BR2_GDB_VERSION_7_11 bool "gdb 7.11.x"
@@ -77,7 +74,6 @@ endif config BR2_GDB_VERSION string default "arc-2017.09-release-gdb" if BR2_arc - default "7.10.1" if BR2_GDB_VERSION_7_10 default "7.11.1" if BR2_GDB_VERSION_7_11 default "7.12.1" if BR2_GDB_VERSION_7_12 default "8.0.1" if BR2_GDB_VERSION_8_0 || !BR2_PACKAGE_HOST_GDB
package/gdb/gdb.hash +0 -1
@@ -1,5 +1,4 @@ # From ftp://gcc.gnu.org/pub/gdb/releases/sha512.sum -sha512 17a5138277a31685a5c2a841cb47ed9bc4626ea617b8ca77750513b300299f4fbbffe504958b5372de610dcb952c679cf8fa9c1bdadd380294fbf59b6e366010 gdb-7.10.1.tar.xz sha512 f80ec6c8a0f0b54c8b945666e875809174402b7e121efb378ebac931a91f9a1cc0048568f8e2f42ae8ae2392ff8d144c2e51d41c7398935017450aaf29838360 gdb-7.11.1.tar.xz sha512 0ac8d0a495103611ef41167a08313a010dce6ca4c6d827cbe8558a0c1a1a8a6bfa53f1b7704251289cababbfaaf9e075550cdf741a54d6cd9ca3433d910efcd8 gdb-7.12.1.tar.xz sha512 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1 gdb-8.0.1.tar.xz
Signature · 1 line
2.14.3
PATCH v2 4/5 package/gdb: remove 7.10
Thomas, Romain, all,
On 2018-02-05 22:10 +0100, Thomas Petazzoni spake thusly:
Quoted 36 lines
From: Romain Naour <[email protected]>
Now that 8.1 has been added and 8.0 is the default version, let's remove the old 7.10 release.
Signed-off-by Romain Naour <[email protected]>Signed-off-by Thomas Petazzoni <[email protected]>--- Config.in.legacy | 7 +++++++ package/gdb/Config.in.host | 4 ---- package/gdb/gdb.hash | 1 - 3 files changed, 7 insertions(+), 5 deletions(-)Config.in.legacy +7
-0@@ -145,6 +145,13 @@ endif ############################################################################### comment "Legacy options removed in 2018.02" +config BR2_GDB_VERSION_7_10 + bool "gdb 7.10 has been removed" + select BR2_LEGACY + help + The 7.10 version of gdb has been removed. Use a newer version + instead. + config BR2_KERNEL_HEADERS_3_4 bool "kernel headers version 3.4.x are no longer supported" select BR2_KERNEL_HEADERS_4_1package/gdb/Config.in.host +0
-0
package/gdb/Config.in.host choice · line 54
Quoted 5 lines
package/gdb/Config.in.host +0
-2@@ -50,9 +50,6 @@ choice help Select the version of gdb you wish to use. -config BR2_GDB_VERSION_7_10 - bool "gdb 7.10.x"
You forgot to remove it from the BR2_PACKAGE_GDB_NEEDS_CXX11 symbol, which would not have hapenned if you did as I suggest in reply to patch 1/5 of the series. ;-)
Regards,
Yann E. MORIN.
Quoted 24 lines
package/gdb/Config.in.host +0
-1config BR2_GDB_VERSION_7_11 bool "gdb 7.11.x"@@ -77,7 +74,6 @@ endif config BR2_GDB_VERSION string default "arc-2017.09-release-gdb" if BR2_arc - default "7.10.1" if BR2_GDB_VERSION_7_10 default "7.11.1" if BR2_GDB_VERSION_7_11 default "7.12.1" if BR2_GDB_VERSION_7_12 default "8.0.1" if BR2_GDB_VERSION_8_0 || !BR2_PACKAGE_HOST_GDBpackage/gdb/gdb.hash +0
-1@@ -1,5 +1,4 @@ # From ftp://gcc.gnu.org/pub/gdb/releases/sha512.sum -sha512 17a5138277a31685a5c2a841cb47ed9bc4626ea617b8ca77750513b300299f4fbbffe504958b5372de610dcb952c679cf8fa9c1bdadd380294fbf59b6e366010 gdb-7.10.1.tar.xz sha512 f80ec6c8a0f0b54c8b945666e875809174402b7e121efb378ebac931a91f9a1cc0048568f8e2f42ae8ae2392ff8d144c2e51d41c7398935017450aaf29838360 gdb-7.11.1.tar.xz sha512 0ac8d0a495103611ef41167a08313a010dce6ca4c6d827cbe8558a0c1a1a8a6bfa53f1b7704251289cababbfaaf9e075550cdf741a54d6cd9ca3433d910efcd8 gdb-7.12.1.tar.xz sha512 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1 gdb-8.0.1.tar.xzSignature · 1 line
2.14.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v2 5/5 package/gdb: remove 7.11
In reply to Thomas PetazzoniFrom: Romain Naour <[email protected]>
Now that 8.1 has been added and 8.0 is the default version, let's remove the old 7.11 release.
--- Config.in.legacy | 7 +++++++ package/gdb/Config.in.host | 4 ---- package/gdb/gdb.hash | 1 - 3 files changed, 7 insertions(+), 5 deletions(-)
Config.in.legacy +7 -0
@@ -145,6 +145,13 @@ endif ############################################################################### comment "Legacy options removed in 2018.02" +config BR2_GDB_VERSION_7_11 + bool "gdb 7.11 has been removed" + select BR2_LEGACY + help + The 7.11 version of gdb has been removed. Use a newer version + instead. + config BR2_GDB_VERSION_7_10 bool "gdb 7.10 has been removed" select BR2_LEGACY
package/gdb/Config.in.host +0 -4
@@ -50,9 +50,6 @@ choice help Select the version of gdb you wish to use. -config BR2_GDB_VERSION_7_11 - bool "gdb 7.11.x" - config BR2_GDB_VERSION_7_12 bool "gdb 7.12.x"
@@ -74,7 +71,6 @@ endif config BR2_GDB_VERSION string default "arc-2017.09-release-gdb" if BR2_arc - default "7.11.1" if BR2_GDB_VERSION_7_11 default "7.12.1" if BR2_GDB_VERSION_7_12 default "8.0.1" if BR2_GDB_VERSION_8_0 || !BR2_PACKAGE_HOST_GDB default "8.1" if BR2_GDB_VERSION_8_1
package/gdb/gdb.hash +0 -1
@@ -1,5 +1,4 @@ # From ftp://gcc.gnu.org/pub/gdb/releases/sha512.sum -sha512 f80ec6c8a0f0b54c8b945666e875809174402b7e121efb378ebac931a91f9a1cc0048568f8e2f42ae8ae2392ff8d144c2e51d41c7398935017450aaf29838360 gdb-7.11.1.tar.xz sha512 0ac8d0a495103611ef41167a08313a010dce6ca4c6d827cbe8558a0c1a1a8a6bfa53f1b7704251289cababbfaaf9e075550cdf741a54d6cd9ca3433d910efcd8 gdb-7.12.1.tar.xz sha512 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1 gdb-8.0.1.tar.xz sha512 ffd82f415d7652d62dad1716c307836f594217a363429609beb7d70239e8bf06b73b393345b0e000796228e56681ed7656ac3c8be05e91d6d652ab0d5b1dc357 gdb-8.1.tar.xz
Signature · 1 line
2.14.3
PATCH v2 5/5 package/gdb: remove 7.11
Thomas, Romain, All,
On 2018-02-05 22:10 +0100, Thomas Petazzoni spake thusly:
Quoted 36 lines
From: Romain Naour <[email protected]>
Now that 8.1 has been added and 8.0 is the default version, let's remove the old 7.11 release.
Signed-off-by Romain Naour <[email protected]>Signed-off-by Thomas Petazzoni <[email protected]>--- Config.in.legacy | 7 +++++++ package/gdb/Config.in.host | 4 ---- package/gdb/gdb.hash | 1 - 3 files changed, 7 insertions(+), 5 deletions(-)Config.in.legacy +7
-0@@ -145,6 +145,13 @@ endif ############################################################################### comment "Legacy options removed in 2018.02" +config BR2_GDB_VERSION_7_11 + bool "gdb 7.11 has been removed" + select BR2_LEGACY + help + The 7.11 version of gdb has been removed. Use a newer version + instead. + config BR2_GDB_VERSION_7_10 bool "gdb 7.10 has been removed" select BR2_LEGACYpackage/gdb/Config.in.host +0
-0
package/gdb/Config.in.host choice · line 54
Quoted 5 lines
package/gdb/Config.in.host +0
-2@@ -50,9 +50,6 @@ choice help Select the version of gdb you wish to use. -config BR2_GDB_VERSION_7_11 - bool "gdb 7.11.x"
Ditto, you forgot to remove it from BR2_PACKAGE_GDB_NEEDS_CXX11.
Regards,
Yann E. MORIN.
Quoted 24 lines
package/gdb/Config.in.host +0
-1config BR2_GDB_VERSION_7_12 bool "gdb 7.12.x"@@ -74,7 +71,6 @@ endif config BR2_GDB_VERSION string default "arc-2017.09-release-gdb" if BR2_arc - default "7.11.1" if BR2_GDB_VERSION_7_11 default "7.12.1" if BR2_GDB_VERSION_7_12 default "8.0.1" if BR2_GDB_VERSION_8_0 || !BR2_PACKAGE_HOST_GDB default "8.1" if BR2_GDB_VERSION_8_1package/gdb/gdb.hash +0
-1@@ -1,5 +1,4 @@ # From ftp://gcc.gnu.org/pub/gdb/releases/sha512.sum -sha512 f80ec6c8a0f0b54c8b945666e875809174402b7e121efb378ebac931a91f9a1cc0048568f8e2f42ae8ae2392ff8d144c2e51d41c7398935017450aaf29838360 gdb-7.11.1.tar.xz sha512 0ac8d0a495103611ef41167a08313a010dce6ca4c6d827cbe8558a0c1a1a8a6bfa53f1b7704251289cababbfaaf9e075550cdf741a54d6cd9ca3433d910efcd8 gdb-7.12.1.tar.xz sha512 5eb328910033f0918058be2f92caebf1e8dfc6caa3c730d99d621627e53de3c1b43761c2f683d53555893253c2f06768cbf56cdea051a3d291ffb6cfae87b5e1 gdb-8.0.1.tar.xz sha512 ffd82f415d7652d62dad1716c307836f594217a363429609beb7d70239e8bf06b73b393345b0e000796228e56681ed7656ac3c8be05e91d6d652ab0d5b1dc357 gdb-8.1.tar.xzSignature · 1 line
2.14.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'