Skip to contentSkip to conversation

KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code

PATCH In review Paul Mackerras 3 participants 6 messages Feb 7, 2018 – Feb 8, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code

This fixes the computation of the HPTE index to use when the HPT resizing code encounters a bolted HPTE which is stored in its secondary HPTE group. The code inverts the HPTE group number, which is correct, but doesn't then mask it with new_hash_mask. As a result, new_pteg will be effectively negative, resulting in new_hptep pointing before the new HPT, which will corrupt memory.

In addition, this removes two BUG_ON statements. The condition that the BUG_ONs were testing -- that we have computed the hash value incorrectly -- has never been observed in testing, and if it did occur, would only affect the guest, not the host. Given that BUG_ON should only be used in conditions where the kernel (i.e. the host kernel, in this case) can't possibly continue execution, it is not appropriate here.

---
 arch/powerpc/kvm/book3s_64_mmu_hv.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_hv.c +2 -6
index 9660972..d196499 100644
@@ -1329,12 +1329,8 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	}
 
 	new_pteg = hash & new_hash_mask;
-	if (vpte & HPTE_V_SECONDARY) {
-		BUG_ON(~pteg != (hash & old_hash_mask));
-		new_pteg = ~new_pteg;
-	} else {
-		BUG_ON(pteg != (hash & old_hash_mask));
-	}
+	if (vpte & HPTE_V_SECONDARY)
+		new_pteg = ~hash & new_hash_mask;
 
 	new_idx = new_pteg * HPTES_PER_GROUP + (idx % HPTES_PER_GROUP);
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
Signature · 1 line
2.7.4
#1 lore raw

PATCH 2/2 KVM: PPC: Book3S HV: Make HPT resizing work on POWER9

From: David Gibson <[email protected]>

This adds code to enable the HPT resizing code to work on POWER9, which uses a slightly modified HPT entry format compared to POWER8. On POWER9, we convert HPTEs read from the HPT from the new format to the old format so that the rest of the HPT resizing code can work as before. HPTEs written to the new HPT are converted to the new format as the last step before writing them into the new HPT.

This takes out the checks added by commit bcd3bb63dbc8 ("KVM: PPC:
Book3S HV: Disable HPT resizing on POWER9 for now", 2017-02-18), now that HPT resizing works on POWER9.

On POWER9, when we pivot to the new HPT, we now call kvmppc_setup_partition_table() to update the partition table in order to make the hardware use the new HPT.

[[email protected] - added kvmppc_setup_partition_table() call,
wrote commit message.]

---
 arch/powerpc/kvm/book3s_64_mmu_hv.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_hv.c +23 -7
index d196499..cb34be7 100644
@@ -1261,6 +1261,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Nothing to do */
 		goto out;
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = be64_to_cpu(hptep[1]);
+		vpte = hpte_new_to_old_v(vpte, rpte);
+	}
+
 	/* Unmap */
 	rev = &old->rev[idx];
 	guest_rpte = rev->guest_rpte;
@@ -1290,7 +1295,6 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 
 	/* Reload PTE after unmap */
 	vpte = be64_to_cpu(hptep[0]);
-
 	BUG_ON(vpte & HPTE_V_VALID);
 	BUG_ON(!(vpte & HPTE_V_ABSENT));
 
@@ -1299,6 +1303,12 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		goto out;
 
 	rpte = be64_to_cpu(hptep[1]);
+
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		vpte = hpte_new_to_old_v(vpte, rpte);
+		rpte = hpte_new_to_old_r(rpte);
+	}
+
 	pshift = kvmppc_hpte_base_page_shift(vpte, rpte);
 	avpn = HPTE_V_AVPN_VAL(vpte) & ~(((1ul << pshift) - 1) >> 23);
 	pteg = idx / HPTES_PER_GROUP;
@@ -1336,6 +1346,10 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
 
 	replace_vpte = be64_to_cpu(new_hptep[0]);
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		unsigned long replace_rpte = be64_to_cpu(new_hptep[1]);
+		replace_vpte = hpte_new_to_old_v(replace_vpte, replace_rpte);
+	}
 
 	if (replace_vpte & (HPTE_V_VALID | HPTE_V_ABSENT)) {
 		BUG_ON(new->order >= old->order);
@@ -1351,6 +1365,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Discard the previous HPTE */
 	}
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = hpte_old_to_new_r(vpte, rpte);
+		vpte = hpte_old_to_new_v(vpte);
+	}
+
 	new_hptep[1] = cpu_to_be64(rpte);
 	new->rev[new_idx].guest_rpte = guest_rpte;
 	/* No need for a barrier, since new HPT isn't active */
@@ -1368,12 +1387,6 @@ static int resize_hpt_rehash(struct kvm_resize_hpt *resize)
 	unsigned  long i;
 	int rc;
 
-	/*
-	 * resize_hpt_rehash_hpte() doesn't handle the new-format HPTEs
-	 * that POWER9 uses, and could well hit a BUG_ON on POWER9.
-	 */
-	if (cpu_has_feature(CPU_FTR_ARCH_300))
-		return -EIO;
 	for (i = 0; i < kvmppc_hpt_npte(&kvm->arch.hpt); i++) {
 		rc = resize_hpt_rehash_hpte(resize, i);
 		if (rc != 0)
@@ -1404,6 +1417,9 @@ static void resize_hpt_pivot(struct kvm_resize_hpt *resize)
 
 	synchronize_srcu_expedited(&kvm->srcu);
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300))
+		kvmppc_setup_partition_table(kvm);
+
 	resize_hpt_debug(resize, "resize_hpt_pivot() done\n");
 }
 
Signature · 1 line
2.7.4
#2 lore raw

PATCH v2 1/1 KVM: PPC: Book3S HV: Make HPT resizing work on POWER9

From: David Gibson <[email protected]>

This adds code to enable the HPT resizing code to work on POWER9, which uses a slightly modified HPT entry format compared to POWER8. On POWER9, we convert HPTEs read from the HPT from the new format to the old format so that the rest of the HPT resizing code can work as before. HPTEs written to the new HPT are converted to the new format as the last step before writing them into the new HPT.

This takes out the checks added by commit bcd3bb63dbc8 ("KVM: PPC:
Book3S HV: Disable HPT resizing on POWER9 for now", 2017-02-18), now that HPT resizing works on POWER9.

On POWER9, when we pivot to the new HPT, we now call kvmppc_setup_partition_table() to update the partition table in order to make the hardware use the new HPT.

[[email protected] - added kvmppc_setup_partition_table() call,
wrote commit message.]

---
v2: Include change to powerpc.c, which somehow got missed in v1.

 arch/powerpc/kvm/book3s_64_mmu_hv.c | 30 +++++++++++++++++++++++-------
 arch/powerpc/kvm/powerpc.c          |  3 +--
 2 files changed, 24 insertions(+), 9 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_hv.c +23 -7
index d196499..cb34be7 100644
@@ -1261,6 +1261,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Nothing to do */
 		goto out;
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = be64_to_cpu(hptep[1]);
+		vpte = hpte_new_to_old_v(vpte, rpte);
+	}
+
 	/* Unmap */
 	rev = &old->rev[idx];
 	guest_rpte = rev->guest_rpte;
@@ -1290,7 +1295,6 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 
 	/* Reload PTE after unmap */
 	vpte = be64_to_cpu(hptep[0]);
-
 	BUG_ON(vpte & HPTE_V_VALID);
 	BUG_ON(!(vpte & HPTE_V_ABSENT));
 
@@ -1299,6 +1303,12 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		goto out;
 
 	rpte = be64_to_cpu(hptep[1]);
+
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		vpte = hpte_new_to_old_v(vpte, rpte);
+		rpte = hpte_new_to_old_r(rpte);
+	}
+
 	pshift = kvmppc_hpte_base_page_shift(vpte, rpte);
 	avpn = HPTE_V_AVPN_VAL(vpte) & ~(((1ul << pshift) - 1) >> 23);
 	pteg = idx / HPTES_PER_GROUP;
@@ -1336,6 +1346,10 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
 
 	replace_vpte = be64_to_cpu(new_hptep[0]);
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		unsigned long replace_rpte = be64_to_cpu(new_hptep[1]);
+		replace_vpte = hpte_new_to_old_v(replace_vpte, replace_rpte);
+	}
 
 	if (replace_vpte & (HPTE_V_VALID | HPTE_V_ABSENT)) {
 		BUG_ON(new->order >= old->order);
@@ -1351,6 +1365,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Discard the previous HPTE */
 	}
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = hpte_old_to_new_r(vpte, rpte);
+		vpte = hpte_old_to_new_v(vpte);
+	}
+
 	new_hptep[1] = cpu_to_be64(rpte);
 	new->rev[new_idx].guest_rpte = guest_rpte;
 	/* No need for a barrier, since new HPT isn't active */
@@ -1368,12 +1387,6 @@ static int resize_hpt_rehash(struct kvm_resize_hpt *resize)
 	unsigned  long i;
 	int rc;
 
-	/*
-	 * resize_hpt_rehash_hpte() doesn't handle the new-format HPTEs
-	 * that POWER9 uses, and could well hit a BUG_ON on POWER9.
-	 */
-	if (cpu_has_feature(CPU_FTR_ARCH_300))
-		return -EIO;
 	for (i = 0; i < kvmppc_hpt_npte(&kvm->arch.hpt); i++) {
 		rc = resize_hpt_rehash_hpte(resize, i);
 		if (rc != 0)
@@ -1404,6 +1417,9 @@ static void resize_hpt_pivot(struct kvm_resize_hpt *resize)
 
 	synchronize_srcu_expedited(&kvm->srcu);
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300))
+		kvmppc_setup_partition_table(kvm);
+
 	resize_hpt_debug(resize, "resize_hpt_pivot() done\n");
 }
 
arch/powerpc/kvm/powerpc.c +1 -2
index b4010b8..47c7a30 100644
@@ -633,8 +633,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = 1;
 		break;
 	case KVM_CAP_SPAPR_RESIZE_HPT:
-		/* Disable this on POWER9 until code handles new HPTE format */
-		r = !!hv_enabled && !cpu_has_feature(CPU_FTR_ARCH_300);
+		r = !!hv_enabled;
 		break;
 #endif
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
Signature · 1 line
2.7.4
Tested-by on v2 1/1
#3 lore raw

Re: [PATCH v2] KVM: PPC: Book3S HV: Make HPT resizing work on POWER9

Quoted 117 lines · Paul Mackerras

From: David Gibson <[email protected]>

This adds code to enable the HPT resizing code to work on POWER9, which uses a slightly modified HPT entry format compared to POWER8. On POWER9, we convert HPTEs read from the HPT from the new format to the old format so that the rest of the HPT resizing code can work as before. HPTEs written to the new HPT are converted to the new format as the last step before writing them into the new HPT.

This takes out the checks added by commit bcd3bb63dbc8 ("KVM: PPC:
Book3S HV: Disable HPT resizing on POWER9 for now", 2017-02-18), now that HPT resizing works on POWER9.

On POWER9, when we pivot to the new HPT, we now call kvmppc_setup_partition_table() to update the partition table in order to make the hardware use the new HPT.

[[email protected] - added kvmppc_setup_partition_table() call,
wrote commit message.]

---
v2: Include change to powerpc.c, which somehow got missed in v1.

 arch/powerpc/kvm/book3s_64_mmu_hv.c | 30 +++++++++++++++++++++++-------
 arch/powerpc/kvm/powerpc.c          |  3 +--
 2 files changed, 24 insertions(+), 9 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_hv.c +23 -7
index d196499..cb34be7 100644
@@ -1261,6 +1261,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Nothing to do */
 		goto out;
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = be64_to_cpu(hptep[1]);
+		vpte = hpte_new_to_old_v(vpte, rpte);
+	}
+
 	/* Unmap */
 	rev = &old->rev[idx];
 	guest_rpte = rev->guest_rpte;
@@ -1290,7 +1295,6 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 
 	/* Reload PTE after unmap */
 	vpte = be64_to_cpu(hptep[0]);
-
 	BUG_ON(vpte & HPTE_V_VALID);
 	BUG_ON(!(vpte & HPTE_V_ABSENT));
 
@@ -1299,6 +1303,12 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		goto out;
 
 	rpte = be64_to_cpu(hptep[1]);
+
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		vpte = hpte_new_to_old_v(vpte, rpte);
+		rpte = hpte_new_to_old_r(rpte);
+	}
+
 	pshift = kvmppc_hpte_base_page_shift(vpte, rpte);
 	avpn = HPTE_V_AVPN_VAL(vpte) & ~(((1ul << pshift) - 1) >> 23);
 	pteg = idx / HPTES_PER_GROUP;
@@ -1336,6 +1346,10 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
 
 	replace_vpte = be64_to_cpu(new_hptep[0]);
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		unsigned long replace_rpte = be64_to_cpu(new_hptep[1]);
+		replace_vpte = hpte_new_to_old_v(replace_vpte, replace_rpte);
+	}
 
 	if (replace_vpte & (HPTE_V_VALID | HPTE_V_ABSENT)) {
 		BUG_ON(new->order >= old->order);
@@ -1351,6 +1365,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Discard the previous HPTE */
 	}
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = hpte_old_to_new_r(vpte, rpte);
+		vpte = hpte_old_to_new_v(vpte);
+	}
+
 	new_hptep[1] = cpu_to_be64(rpte);
 	new->rev[new_idx].guest_rpte = guest_rpte;
 	/* No need for a barrier, since new HPT isn't active */
@@ -1368,12 +1387,6 @@ static int resize_hpt_rehash(struct kvm_resize_hpt *resize)
 	unsigned  long i;
 	int rc;
 
-	/*
-	 * resize_hpt_rehash_hpte() doesn't handle the new-format HPTEs
-	 * that POWER9 uses, and could well hit a BUG_ON on POWER9.
-	 */
-	if (cpu_has_feature(CPU_FTR_ARCH_300))
-		return -EIO;
 	for (i = 0; i < kvmppc_hpt_npte(&kvm->arch.hpt); i++) {
 		rc = resize_hpt_rehash_hpte(resize, i);
 		if (rc != 0)
@@ -1404,6 +1417,9 @@ static void resize_hpt_pivot(struct kvm_resize_hpt *resize)
 
 	synchronize_srcu_expedited(&kvm->srcu);
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300))
+		kvmppc_setup_partition_table(kvm);
+
 	resize_hpt_debug(resize, "resize_hpt_pivot() done\n");
 }
 
arch/powerpc/kvm/powerpc.c +0 -0
index b4010b8..47c7a30 100644

arch/powerpc/kvm/powerpc.c int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) · line 639

Quoted 9 lines
arch/powerpc/kvm/powerpc.c +1 -2
@@ -633,8 +633,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = 1;
 		break;
 	case KVM_CAP_SPAPR_RESIZE_HPT:
-		/* Disable this on POWER9 until code handles new HPTE format */
-		r = !!hv_enabled && !cpu_has_feature(CPU_FTR_ARCH_300);
+		r = !!hv_enabled;
 		break;
 #endif
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

I've tested this series with a RHEL 4.14 kernel on a POWER9 host and a RHEL 3.10 kernel in the guest (max-cpu-compat=power8 and "-m 80G,slots%6,maxmem%7G"), all works well:

[root@localhost ~]# cat /sys/kernel/debug/powerpc/hpt_order

30

[root@localhost ~]# echo 31 > /sys/kernel/debug/powerpc/hpt_order

[   65.888226] lpar: Attempting to resize HPT to shift 31
[   66.634834] lpar: HPT resize to shift 31 complete (210 ms / 535 ms)

[root@localhost ~]# cat /sys/kernel/debug/powerpc/hpt_order

31

[root@localhost ~]# echo 29 > /sys/kernel/debug/powerpc/hpt_order

[   77.023857] lpar: Attempting to resize HPT to shift 29
[   77.739819] lpar: HPT resize to shift 29 complete (105 ms / 610 ms)

[root@localhost ~]# cat /sys/kernel/debug/powerpc/hpt_order

29

Previously, it was failing with:

-bash: echo: write error: No such device

Thanks,
Laurent

Reviewed-by on v2 1/1
#4 lore raw

Re: [PATCH v2] KVM: PPC: Book3S HV: Make HPT resizing work on POWER9

In reply to Paul Mackerras
Quoted 13 lines · Paul Mackerras

From: David Gibson <[email protected]>

This adds code to enable the HPT resizing code to work on POWER9, which uses a slightly modified HPT entry format compared to POWER8. On POWER9, we convert HPTEs read from the HPT from the new format to the old format so that the rest of the HPT resizing code can work as before. HPTEs written to the new HPT are converted to the new format as the last step before writing them into the new HPT.

This takes out the checks added by commit bcd3bb63dbc8 ("KVM: PPC:
Book3S HV: Disable HPT resizing on POWER9 for now", 2017-02-18), now that HPT resizing works on POWER9.

Quoted 8 lines

On POWER9, when we pivot to the new HPT, we now call kvmppc_setup_partition_table() to update the partition table in order to make the hardware use the new HPT.

[[email protected] - added kvmppc_setup_partition_table() call,
wrote commit message.]

Quoted 104 lines

---
v2: Include change to powerpc.c, which somehow got missed in v1.

 arch/powerpc/kvm/book3s_64_mmu_hv.c | 30 +++++++++++++++++++++++-------
 arch/powerpc/kvm/powerpc.c          |  3 +--
 2 files changed, 24 insertions(+), 9 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_hv.c +23 -7
index d196499..cb34be7 100644
@@ -1261,6 +1261,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Nothing to do */
 		goto out;
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = be64_to_cpu(hptep[1]);
+		vpte = hpte_new_to_old_v(vpte, rpte);
+	}
+
 	/* Unmap */
 	rev = &old->rev[idx];
 	guest_rpte = rev->guest_rpte;
@@ -1290,7 +1295,6 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 
 	/* Reload PTE after unmap */
 	vpte = be64_to_cpu(hptep[0]);
-
 	BUG_ON(vpte & HPTE_V_VALID);
 	BUG_ON(!(vpte & HPTE_V_ABSENT));
 
@@ -1299,6 +1303,12 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		goto out;
 
 	rpte = be64_to_cpu(hptep[1]);
+
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		vpte = hpte_new_to_old_v(vpte, rpte);
+		rpte = hpte_new_to_old_r(rpte);
+	}
+
 	pshift = kvmppc_hpte_base_page_shift(vpte, rpte);
 	avpn = HPTE_V_AVPN_VAL(vpte) & ~(((1ul << pshift) - 1) >> 23);
 	pteg = idx / HPTES_PER_GROUP;
@@ -1336,6 +1346,10 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
 
 	replace_vpte = be64_to_cpu(new_hptep[0]);
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		unsigned long replace_rpte = be64_to_cpu(new_hptep[1]);
+		replace_vpte = hpte_new_to_old_v(replace_vpte, replace_rpte);
+	}
 
 	if (replace_vpte & (HPTE_V_VALID | HPTE_V_ABSENT)) {
 		BUG_ON(new->order >= old->order);
@@ -1351,6 +1365,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Discard the previous HPTE */
 	}
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = hpte_old_to_new_r(vpte, rpte);
+		vpte = hpte_old_to_new_v(vpte);
+	}
+
 	new_hptep[1] = cpu_to_be64(rpte);
 	new->rev[new_idx].guest_rpte = guest_rpte;
 	/* No need for a barrier, since new HPT isn't active */
@@ -1368,12 +1387,6 @@ static int resize_hpt_rehash(struct kvm_resize_hpt *resize)
 	unsigned  long i;
 	int rc;
 
-	/*
-	 * resize_hpt_rehash_hpte() doesn't handle the new-format HPTEs
-	 * that POWER9 uses, and could well hit a BUG_ON on POWER9.
-	 */
-	if (cpu_has_feature(CPU_FTR_ARCH_300))
-		return -EIO;
 	for (i = 0; i < kvmppc_hpt_npte(&kvm->arch.hpt); i++) {
 		rc = resize_hpt_rehash_hpte(resize, i);
 		if (rc != 0)
@@ -1404,6 +1417,9 @@ static void resize_hpt_pivot(struct kvm_resize_hpt *resize)
 
 	synchronize_srcu_expedited(&kvm->srcu);
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300))
+		kvmppc_setup_partition_table(kvm);
+
 	resize_hpt_debug(resize, "resize_hpt_pivot() done\n");
 }
 
arch/powerpc/kvm/powerpc.c +1 -2
index b4010b8..47c7a30 100644
@@ -633,8 +633,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = 1;
 		break;
 	case KVM_CAP_SPAPR_RESIZE_HPT:
-		/* Disable this on POWER9 until code handles new HPTE format */
-		r = !!hv_enabled && !cpu_has_feature(CPU_FTR_ARCH_300);
+		r = !!hv_enabled;
 		break;
 #endif
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson
Reviewed-by on v1 1/2
#5 lore raw
In reply to Paul Mackerras
Quoted 7 lines · Paul Mackerras

This fixes the computation of the HPTE index to use when the HPT resizing code encounters a bolted HPTE which is stored in its secondary HPTE group. The code inverts the HPTE group number, which is correct, but doesn't then mask it with new_hash_mask. As a result, new_pteg will be effectively negative, resulting in new_hptep pointing before the new HPT, which will corrupt memory.

Quoted 7 lines

In addition, this removes two BUG_ON statements. The condition that the BUG_ONs were testing -- that we have computed the hash value incorrectly -- has never been observed in testing, and if it did occur, would only affect the guest, not the host. Given that BUG_ON should only be used in conditions where the kernel (i.e. the host kernel, in this case) can't possibly continue execution, it is not appropriate here.

Fair enough. I think those were there because they were useful during early development, but should have been removed after that.

Quoted 2 lines
Quoted 23 lines
---
 arch/powerpc/kvm/book3s_64_mmu_hv.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
arch/powerpc/kvm/book3s_64_mmu_hv.c +2 -6
index 9660972..d196499 100644
@@ -1329,12 +1329,8 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	}
 
 	new_pteg = hash & new_hash_mask;
-	if (vpte & HPTE_V_SECONDARY) {
-		BUG_ON(~pteg != (hash & old_hash_mask));
-		new_pteg = ~new_pteg;
-	} else {
-		BUG_ON(pteg != (hash & old_hash_mask));
-	}
+	if (vpte & HPTE_V_SECONDARY)
+		new_pteg = ~hash & new_hash_mask;
 
 	new_idx = new_pteg * HPTES_PER_GROUP + (idx % HPTES_PER_GROUP);
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson