env: Fix env_load_location
PATCH 1/2 env: Fix env_load_location
Commit 7d714a24d725 ("env: Support multiple environments") added static variable env_load_location. When saving environmental variables, this variable is presumed to have the value set before. In case the value was set before relocation and U-Boot runs from a NOR flash, this variable wasn't writable. This causes failure when saving the environment. To save this location, global data must be used instead.
---
Limited test on LS1043ARDB.
env/env.c | 8 +++----- include/asm-generic/global_data.h | 1 + include/environment.h | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-)
env/env.c +3 -5
@@ -62,8 +62,6 @@ static enum env_location env_locations[] = {#endif }; -static enum env_location env_load_location =ENVL_UNKNOWN ; -static bool env_has_inited (enum env_location location) {return gd->env_has_init &BIT (location);
@@ -108,11 +106,11 @@ __weak enum env_location env_get_location(enum env_operation op, int prio)if (prio >=ARRAY_SIZE (env_locations))return ENVL_UNKNOWN ; - env_load_location = env_locations[prio]; -return env_load_location; + gd->env_load_location = env_locations[prio]; +return gd->env_load_location;case ENVOP_SAVE : -return env_load_location; +return gd->env_load_location; }return ENVL_UNKNOWN ;
include/asm-generic/global_data.h +1 -0
@@ -51,6 +51,7 @@ typedef struct global_data {unsigned long env_addr;/* Address of Environment struct */ unsigned long env_valid;/* Environment valid? enum env_valid */ unsigned long env_has_init;/* Bitmask of boolean of struct env_location offsets */ +int env_load_location;unsigned long ram_top;/* Top address of RAM used by U-Boot */ unsigned long relocaddr;/* Start address of U-Boot in RAM */
include/environment.h +1 -1
@@ -188,6 +188,7 @@ enum env_valid { };enum env_location { +ENVL_UNKNOWN ,ENVL_EEPROM ,ENVL_EXT4 ,ENVL_FAT ,
@@ -202,7 +203,6 @@ enum env_location {ENVL_NOWHERE , ENVL_COUNT, - ENVL_UNKNOWN, };/* value for the various operations we want to perform on the env */
Signature · 1 line
2.7.4
PATCH 2/2 env: Add back default action of get_char in env_get_char()
Commit 8a3a7e2270b3 ("env: Pass additional parameters to the env lookup function") dropped the default action if driver doesn't have get_char() defined. This causes failure to get environmental variables from NOR flash. Add back this default action for now.
---
Limited test on LS1043ARDB.
env/env.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
env/env.c +1 -1
@@ -159,7 +159,7 @@ int env_get_char(int index)int ret;if (!drv->get_char) -continue ; +return *(uchar *)(gd->env_addr + index);if (!env_has_inited (drv->location))continue ;
Signature · 1 line
2.7.4
PATCH 2/2 env: Add back default action of get_char in env_get_char()
Quoted 18 lines · York Sun
Commit
8a3a7e2270b3("env: Pass additional parameters to the env lookup function") dropped the default action if driver doesn't haveget_char()defined. This causes failure to get environmental variables from NOR flash. Add back this default action for now.Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>---
Limited test on LS1043ARDB.env/env.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)env/env.c +0
-0
env/env.c int env_get_char(int index) · line 162
Quoted 5 lines
env/env.c +1
-1@@ -159,7 +159,7 @@ int env_get_char(int index)int ret;if (!drv->get_char) -continue ; +return *(uchar *)(gd->env_addr + index);
Thinking more about this, I think this would break the case where the first environment in your list has no get_char method, but the second might.
Would something like that work?
------------ 8< --------
env/env.c +5 -1
@@ -152,6 +152,7 @@ static struct env_driver *env_driver_lookup(enum env_operation op, int prio)int env_get_char (int index) {struct env_driver *drv; +bool has_get_char = false;int prio;if (gd->env_valid ==ENV_INVALID )
@@ -166,6 +167,7 @@ int env_get_char(int index)if (!env_has_inited (drv->location))continue ; + has_get_char = true; ret = drv->get_char (index);if (!ret)return 0 ;
@@ -174,6 +176,9 @@ int env_get_char(int index) drv->name, ret); } +if (!has_get_char) +return *(uchar *)(gd->env_addr + index); +return -ENODEV ; } ------ 8< -------
Thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180208/3a4fb80f/attachment.sig>
PATCH 2/2 env: Add back default action of get_char in env_get_char()
[e-news abonnieren]<http://www.pepperl-fuchs.de/e-news> [YouTube: Pepperl+Fuchs auf YouTube] <http://www.youtube.com/user/PepperlFuchsGmbH> [@PepperlFuchsDE folgen] <https://twitter.com/PepperlFuchsDE> [Pepperl+Fuchs auf XING] <https://www.xing.com/companies/pepperl%252bfuchsgmbh>
________________________________
[Pepperl+Fuchs GmbH]<http://www.pepperl-fuchs.com>
Denken Sie bitte an die Umwelt und prüfen Sie, ob diese E-Mail wirklich ausgedruckt werden muss.
SocialMedia2014
On 08.02.2018 09:47, Maxime Ripard wrote:
On Wed, Feb 07, 2018 at 02:17:12PM -0800, York Sun wrote:
Commit 8a3a7e2270b3 ("env: Pass additional parameters to the env lookup function") dropped the default action if driver doesn't have get_char() defined. This causes failure to get environmental variables from NOR flash. Add back this default action for now.
---
Limited test on LS1043ARDB.
env/env.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
env/env.c +1 -1
@@ -159,7 +159,7 @@ int env_get_char(int index)int ret;if (!drv->get_char) -continue ; +return *(uchar *)(gd->env_addr + index);
Thinking more about this, I think this would break the case where the first environment in your list has no get_char method, but the second might.
How can we decide which way is wanted? With your patch below, we might end up loading chars from a low-prio environment (which is not CRC checked) in the early boot stage. Later, we load the environment from another env driver with higher priority.
That's why I suggested removing the 'get_char' callback from the env drivers :-) Early boot stage environment lookups would still work the old way reading from 'gd->env_addr + index'.
Simon
Would something like that work?
------------ 8< --------
env/env.c +5 -1
@@ -152,6 +152,7 @@ static struct env_driver *env_driver_lookup(enum env_operation op, int prio)int env_get_char (int index) {struct env_driver *drv; +bool has_get_char = false;int prio;if (gd->env_valid ==ENV_INVALID )
@@ -166,6 +167,7 @@ int env_get_char(int index)if (!env_has_inited (drv->location))continue ; + has_get_char = true; ret = drv->get_char (index);if (!ret)return 0 ;
@@ -174,6 +176,9 @@ int env_get_char(int index) drv->name, ret); } +if (!has_get_char) +return *(uchar *)(gd->env_addr + index); +return -ENODEV ; } ------ 8< -------
Thanks!
Maxime
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de<mailto:[email protected]>
https://lists.denx.de/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image53adc6.BMP
Type: image/bmp
Size: 1782 bytes
Desc: image53adc6.BMP
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180208/9a583ce5/attachment-0005.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image90c3c9.BMP
Type: image/bmp
Size: 1782 bytes
Desc: image90c3c9.BMP
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180208/9a583ce5/attachment-0006.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image12d4d9.BMP
Type: image/bmp
Size: 1782 bytes
Desc: image12d4d9.BMP
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180208/9a583ce5/attachment-0007.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image518fd1.BMP
Type: image/bmp
Size: 1782 bytes
Desc: image518fd1.BMP
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180208/9a583ce5/attachment-0008.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imagedae50d.BMP
Type: image/bmp
Size: 55350 bytes
Desc: imagedae50d.BMP
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180208/9a583ce5/attachment-0009.bin>
PATCH 2/2 env: Add back default action of get_char in env_get_char()
Sorry for the html mess, I'll resend in a minute.
Simon
Pepperl+Fuchs GmbH, Mannheim
Geschaeftsfuehrer/Managing Directors: Dr.-Ing. Gunther Kegel (Vors./CEO), Werner Guthier, Mehmet Hatiboglu Vorsitzender des Aufsichtsrats/Chairman of the supervisory board: Claus Michael Registergericht/Register Court: AG Mannheim HRB 4713
Quoted 4 lines · Simon Goldschmidt
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Wichtiger Hinweis:
Diese E-Mail einschliesslich ihrer Anhaenge enthaelt vertrauliche und rechtlich geschuetzte Informationen, die nur fuer den Adressaten bestimmt sind.
Sollten Sie nicht der bezeichnete Adressat sein, so teilen Sie dies bitte dem Absender umgehend mit und loeschen Sie diese Nachricht und ihre Anhaenge. Die unbefugte Weitergabe, das Anfertigen von Kopien und jede Veraenderung der E-Mail ist untersagt. Der Absender haftet nicht fuer Inhalte von veraenderten E-Mails.
Important Information:
This e-mail message including its attachments contains confidential and legally protected information solely intended for the addressee. If you are not the intended addressee of this message, please contact the addresser immediately and delete this message including its attachments. The unauthorized dissemination, copying and change of this e-mail are strictly forbidden. The addresser shall not be liable for the content of such changed e-mails.
PATCH 2/2 env: Add back default action of get_char in env_get_char()
In reply to Maxime RipardQuoted 21 lines · Maxime Ripard
Quoted 20 lines · York Sun
Commit
8a3a7e2270b3("env: Pass additional parameters to the env lookup function") dropped the default action if driver doesn't haveget_char()defined. This causes failure to get environmental variables from NOR flash. Add back this default action for now.Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>---
Limited test on LS1043ARDB.env/env.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)env/env.c +0
-0@@ -159,7 +159,7 @@ int env_get_char(int index)int ret;
Quoted 6 lines
env/env.c int env_get_char(int index) · line 162
Quoted 3 lines
env/env.c +1
-1if (!drv->get_char) -continue ; +return *(uchar *)(gd->env_addr + index);Thinking more about this, I think this would break the case where the first environment in your list has no
get_charmethod, but the second might.
How can we decide which way is wanted? With your patch below, we might end up loading chars from a low-prio environment (which is not CRC checked) in the early boot stage. Later, we load the environment from another env driver with higher priority.
That's why I suggested removing the 'get_char' callback from the env drivers :-) Early boot stage environment lookups would still work the old way reading from 'gd->env_addr + index'.
Simon
Quoted 42 lines
Would something like that work?
------------ 8< --------
env/env.c +5
-1@@ -152,6 +152,7 @@ static struct env_driver *env_driver_lookup(enum env_operation op, int prio)int env_get_char (int index) {struct env_driver *drv; +bool has_get_char = false;int prio;if (gd->env_valid ==ENV_INVALID )@@ -166,6 +167,7 @@ int env_get_char(int index)if (!env_has_inited (drv->location))continue ; + has_get_char = true; ret = drv->get_char (index);if (!ret)return 0 ;@@ -174,6 +176,9 @@ int env_get_char(int index) drv->name, ret); } +if (!has_get_char) +return *(uchar *)(gd->env_addr + index); +return -ENODEV ; } ------ 8< -------Thanks!
Maxime_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 2/2 env: Add back default action of get_char in env_get_char()
Quoted 29 lines · Simon Goldschmidt
Quoted 14 lines · Maxime Ripard
Quoted 13 lines · York Sun
Commit
8a3a7e2270b3("env: Pass additional parameters to the env lookup function") dropped the default action if driver doesn't haveget_char()defined. This causes failure to get environmental variables from NOR flash. Add back this default action for now.Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>---
Limited test on LS1043ARDB.env/env.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 12 lines
env/env.c int env_get_char(int index) · line 161
Quoted 9 lines
env/env.c +1
-1@@ -159,7 +159,7 @@ int env_get_char(int index)int ret;if (!drv->get_char) -continue ; +return *(uchar *)(gd->env_addr + index);Thinking more about this, I think this would break the case where the first environment in your list has no
get_charmethod, but the second might.
Quoted 4 lines
How can we decide which way is wanted? With your patch below, we might end up loading chars from a low-prio environment (which is not CRC checked) in the early boot stage. Later, we load the environment from another env driver with higher priority.
Ah, right.
Quoted 3 lines
That's why I suggested removing the '
get_char' callback from the env drivers :-) Early boot stage environment lookups would still work the old way reading from 'gd->env_addr+ index'.
If that works on York's board, I'm all in.
Maxime
Signature · 3 lines
Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
PATCH 2/2 env: Add back default action of get_char in env_get_char()
Maxime, York,
I've just sent a patch that removes 'get_char' callback from the env drivers. This should restore the old behaviour we had before supporting multiple environment drivers (for all but eeprom, of course).
Simon
Quoted 42 lines · Maxime Ripard
Quoted 28 lines · Simon Goldschmidt
Quoted 14 lines · Maxime Ripard
Quoted 13 lines · York Sun
Commit
8a3a7e2270b3("env: Pass additional parameters to the env lookup function") dropped the default action if driver doesn't haveget_char()defined. This causes failure to get environmental variables from NOR flash. Add back this default action for now.Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>---
Limited test on LS1043ARDB.env/env.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 12 lines
env/env.c int env_get_char(int index) · line 161
Quoted 9 lines
env/env.c +1
-1@@ -159,7 +159,7 @@ int env_get_char(int index)int ret;if (!drv->get_char) -continue ; +return *(uchar *)(gd->env_addr + index);Thinking more about this, I think this would break the case where the first environment in your list has no
get_charmethod, but the second might.Quoted 4 lines
How can we decide which way is wanted? With your patch below, we might end up loading chars from a low-prio environment (which is not CRC checked) in the early boot stage. Later, we load the environment from another env driver with higher priority.
Ah, right.
Quoted 3 lines
That's why I suggested removing the '
get_char' callback from the env drivers :-) Early boot stage environment lookups would still work the old way reading from 'gd->env_addr+ index'.If that works on York's board, I'm all in.
Maxime
PATCH 1/2 env: Fix env_load_location
In reply to York SunHi,
Thanks for your patch
Quoted 71 lines · York Sun
Commit
7d714a24d725("env: Support multiple environments") added static variableenv_load_location. When saving environmental variables, this variable is presumed to have the value set before. In case the value was set before relocation and U-Boot runs from a NOR flash, this variable wasn't writable. This causes failure when saving the environment. To save this location, global data must be used instead.Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>---
Limited test on LS1043ARDB.env/env.c | 8 +++----- include/asm-generic/global_data.h | 1 + include/environment.h | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-)env/env.c +3
-5@@ -62,8 +62,6 @@ static enum env_location env_locations[] = {#endif }; -static enum env_location env_load_location =ENVL_UNKNOWN ; -static bool env_has_inited (enum env_location location) {return gd->env_has_init &BIT (location);@@ -108,11 +106,11 @@ __weak enum env_location env_get_location(enum env_operation op, int prio)if (prio >=ARRAY_SIZE (env_locations))return ENVL_UNKNOWN ; - env_load_location = env_locations[prio]; -return env_load_location; + gd->env_load_location = env_locations[prio]; +return gd->env_load_location;case ENVOP_SAVE : -return env_load_location; +return gd->env_load_location; }return ENVL_UNKNOWN ;include/asm-generic/global_data.h +1
-0@@ -51,6 +51,7 @@ typedef struct global_data {unsigned long env_addr;/* Address of Environment struct */ unsigned long env_valid;/* Environment valid? enum env_valid */ unsigned long env_has_init;/* Bitmask of boolean of struct env_location offsets */ +int env_load_location;unsigned long ram_top;/* Top address of RAM used by U-Boot */ unsigned long relocaddr;/* Start address of U-Boot in RAM */ include/environment.h +1
-0@@ -188,6 +188,7 @@ enum env_valid { };enum env_location { +ENVL_UNKNOWN ,ENVL_EEPROM ,ENVL_EXT4 ,ENVL_FAT ,
include/environment.h enum env_location { · line 205
Quoted 4 lines
include/environment.h +0
-1@@ -202,7 +203,6 @@ enum env_location {ENVL_NOWHERE , ENVL_COUNT, - ENVL_UNKNOWN,
Why did you need to change this? This looks a bit odd.
Thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180208/8f54ce1f/attachment.sig>
PATCH 1/2 env: Fix env_load_location
Quoted 12 lines · Maxime Ripard
Hi,
Thanks for your patch
Quoted 7 lines · York Sun
Commit
7d714a24d725("env: Support multiple environments") added static variableenv_load_location. When saving environmental variables, this variable is presumed to have the value set before. In case the value was set before relocation and U-Boot runs from a NOR flash, this variable wasn't writable. This causes failure when saving the environment. To save this location, global data must be used instead.
Out of curiosity: which linker sections are affected of this issue? I assume only initialized data ('.data') is affected as it is left in place. Also, I assume that uninitialized data ('.bss') is not affected (as your linker can place this into ram)?
If so, this issue could be fixed by changing ENVL_UNKNOWN to zero (which you already do in your patch) and leaving 'env_load_location' uninitialized, in which case it is initialized to zero (== ENVL_UNKNOWN) as defined by the C standard.
Another possibility to fix this would be to have your linker script put 'data' into ram but initialize it from rom. Something like this:
.data :
{
 <your section contents here>
} >ram AT>rom
To me, both versions would be better than to add members to struct global_dat.
Quoted 65 lines
Quoted 65 lines
Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>---
Limited test on LS1043ARDB.env/env.c | 8 +++----- include/asm-generic/global_data.h | 1 + include/environment.h | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-)env/env.c +3
-5@@ -62,8 +62,6 @@ static enum env_location env_locations[] = {#endif }; -static enum env_location env_load_location =ENVL_UNKNOWN ; -static bool env_has_inited (enum env_location location) {return gd->env_has_init &BIT (location);@@ -108,11 +106,11 @@ __weak enum env_location env_get_location(enum env_operation op, int prio)if (prio >=ARRAY_SIZE (env_locations))return ENVL_UNKNOWN ; - env_load_location = env_locations[prio]; -return env_load_location; + gd->env_load_location = env_locations[prio]; +return gd->env_load_location;case ENVOP_SAVE : -return env_load_location; +return gd->env_load_location; }return ENVL_UNKNOWN ;include/asm-generic/global_data.h +1
-0@@ -51,6 +51,7 @@ typedef struct global_data {unsigned long env_addr;/* Address of Environment struct */ unsigned long env_valid;/* Environment valid? enum env_valid */ unsigned long env_has_init;/* Bitmask of boolean of struct env_location offsets */ +int env_load_location;unsigned long ram_top;/* Top address of RAM used by U-Boot */ unsigned long relocaddr;/* Start address of U-Boot in RAM */ include/environment.h +1
-0@@ -188,6 +188,7 @@ enum env_valid { };enum env_location { +ENVL_UNKNOWN ,ENVL_EEPROM ,ENVL_EXT4 ,ENVL_FAT ,@@ -202,7 +203,6 @@ enum env_location { ENVL_NOWHERE,
Quoted 3 lines
include/environment.h enum env_location { · line 205
Quoted 2 lines
include/environment.h +0
-1ENVL_COUNT, - ENVL_UNKNOWN,Why did you need to change this? This looks a bit odd.
The global data struct is initialized to zero. I guess this change is meant to ensure 'gd->env_load_location' is initialized to ENV_UNKOWN (see my comments above).
Simon
Quoted 10 lines
Thanks!
Maxime_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 1/2 env: Fix env_load_location
Quoted 14 lines · Simon Goldschmidt
Quoted 12 lines · Maxime Ripard
Hi,
Thanks for your patch
Quoted 7 lines · York Sun
Commit
7d714a24d725("env: Support multiple environments") added static variableenv_load_location. When saving environmental variables, this variable is presumed to have the value set before. In case the value was set before relocation and U-Boot runs from a NOR flash, this variable wasn't writable. This causes failure when saving the environment. To save this location, global data must be used instead.
Quoted 8 lines
Out of curiosity: which linker sections are affected of this issue? I assume only initialized data ('.data') is affected as it is left in place. Also, I assume that uninitialized data ('.bss') is not affected (as your linker can place this into ram)?
If so, this issue could be fixed by changingENVL_UNKNOWNto zero (which you already do in your patch) and leaving 'env_load_location' uninitialized, in which case it is initialized to zero (==ENVL_UNKNOWN) as defined by the C standard.
Leaving it as ENVL_UNKNOWN doesn't fix the problem. The env_load_location needs to be valid after relocation. Leaving it as unknown doesn't let you write env.
Quoted 11 lines
Another possibility to fix this would be to have your linker script put 'data' into ram but initialize it from rom. Something like this:
.data :
{
 <your section contents here>
} >ram AT>romTo me, both versions would be better than to add members to struct
global_dat.
Not everything in initial RAM is copied to final RAM. After relocation, we shouldn't be using initial RAM at all. Actually the initial RAM may be used for other purpose.
Quoted 66 lines
Quoted 66 lines
Quoted 66 lines
Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>---
Limited test on LS1043ARDB.env/env.c | 8 +++----- include/asm-generic/global_data.h | 1 + include/environment.h | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-)env/env.c +3
-5@@ -62,8 +62,6 @@ static enum env_location env_locations[] = {#endif }; -static enum env_location env_load_location =ENVL_UNKNOWN ; -static bool env_has_inited (enum env_location location) {return gd->env_has_init &BIT (location);@@ -108,11 +106,11 @@ __weak enum env_location env_get_location(enum env_operation op, int prio)if (prio >=ARRAY_SIZE (env_locations))return ENVL_UNKNOWN ; - env_load_location = env_locations[prio]; -return env_load_location; + gd->env_load_location = env_locations[prio]; +return gd->env_load_location;case ENVOP_SAVE : -return env_load_location; +return gd->env_load_location; }return ENVL_UNKNOWN ;include/asm-generic/global_data.h +1
-0@@ -51,6 +51,7 @@ typedef struct global_data {unsigned long env_addr;/* Address of Environment struct */ unsigned long env_valid;/* Environment valid? enum env_valid */ unsigned long env_has_init;/* Bitmask of boolean of struct env_location offsets */ +int env_load_location;unsigned long ram_top;/* Top address of RAM used by U-Boot */ unsigned long relocaddr;/* Start address of U-Boot in RAM */ include/environment.h +1
-0@@ -188,6 +188,7 @@ enum env_valid { };enum env_location { +ENVL_UNKNOWN ,ENVL_EEPROM ,ENVL_EXT4 ,ENVL_FAT ,@@ -202,7 +203,6 @@ enum env_location { ENVL_NOWHERE,
Quoted 7 lines
Quoted 3 lines
include/environment.h enum env_location { · line 205
Quoted 2 lines
include/environment.h +0
-1ENVL_COUNT, - ENVL_UNKNOWN,Why did you need to change this? This looks a bit odd.
The global data struct is initialized to zero. I guess this change is meant to ensure '
gd->env_load_location' is initialized toENV_UNKOWN(see my comments above).
Yes. That was my intention.
York
PATCH 1/2 env: Fix env_load_location
In reply to York SunQuoted 10 lines · York Sun
Commit
7d714a24d725("env: Support multiple environments") added static variableenv_load_location. When saving environmental variables, this variable is presumed to have the value set before. In case the value was set before relocation and U-Boot runs from a NOR flash, this variable wasn't writable. This causes failure when saving the environment. To save this location, global data must be used instead.Signed-off-by York Sun <[email protected]>CC Maxime Ripard <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180217/e7265311/attachment.sig>