am335x_evm: Consolidate eMMC partitions with DFU info
PATCH 1/1 am335x_evm: Consolidate eMMC partitions with DFU info
From DFU_ALT_INFO_EMMC (include/environment/ti/dfu.h) we can see that rootfs will be flashed to second partition on eMMC. But at the moment we have only one partition in $partitions environment variable. Let's add "bootloader" partition prior to "rootfs", so that DFU works correctly. This also fixes eMMC boot, which looks for rootfs on second partition.
"bootloader" partition start corresponds to "u-boot.img.raw" in DFU eMMC info, which is 0x300 sector (384 KiB offset from eMMC start).
rootfs start address can be also found from DFU eMMC info. bootloader-related area is finished at 0x1500 sector (2688 KiB offset from eMMC start). This should be the start address for rootfs in $partitions environment variable.
While at it, fix U-Boot environment address to be the same as for AM57x EVM, so that it doesn't clash with other partitions.
So now eMMC layout looks like this:
===============================================================
0 +------------------------+
| MBR/GPT header | 128 -
128 +------------------------+
| MLO | 256 -
384 +------------------------+
| u-boot.img | 1792 bootloader
2176 +------------------------+
| //////// hole //////// | 256 -
2432 +------------------------+
| U-Boot environment | 128 -
2560 +------------------------+
| U-Boot environment | 128 -
| (redundant) |
2688 +------------------------+
| rootfs | remaining rootfs
end +------------------------+
==============================================================="hole" area can be used further for storing U-Boot environment (like it's done in AM57x EVM config file) or for increasing u-boot.img area (in case u-boot.img size increased, e.g. if new dtbs were added).
This commit conforms with Linux partition table from f6d245b8c56c ("arm: am57xx: Fix Linux boot from eMMC") commit, making things in uniform way.
--- include/configs/am335x_evm.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
include/configs/am335x_evm.h +8 -5
@@ -17,12 +17,13 @@#define __CONFIG_AM335X_EVM_H#include <configs/ti_am335x_common.h> +#include <linux/sizes.h> #ifndef CONFIG_SPL_BUILD # define CONFIG_TIMESTAMP #endif -#define CONFIG_SYS_BOOTM_LEN (16 << 20) +#define CONFIG_SYS_BOOTM_LEN SZ_16M#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
@@ -34,7 +35,7 @@#define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds"/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_ENV_SIZE SZ_128K#ifdef CONFIG_NAND #define NANDARGS \
@@ -99,7 +100,9 @@"console=ttyO0,115200n8\0" \"partitions=" \"uuid_disk=${uuid_gpt_disk};" \ -"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ +"name=bootloader,start=384K,size=1792K," \ +"uuid=${uuid_gpt_bootloader};" \ +"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \"optargs=\0" \"ramroot=/dev/ram0 rw\0" \"ramrootfstype=ext2\0" \
@@ -280,8 +283,8 @@#define CONFIG_ENV_OFFSET_REDUND (896 << 10)/* 896 KiB in */ #elif defined(CONFIG_EMMC_BOOT )#define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MMC_ENV_PART 2 -#define CONFIG_ENV_OFFSET 0x0 +#define CONFIG_SYS_MMC_ENV_PART 0 +#define CONFIG_ENV_OFFSET 0x260000#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)#define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_SYS_MMC_MAX_DEVICE 2
Signature · 1 line
2.15.1
PATCH 1/1 am335x_evm: Consolidate eMMC partitions with DFU info
Quoted 44 lines · Sam Protsenko
From
DFU_ALT_INFO_EMMC(include/environment/ti/dfu.h) we can see that rootfs will be flashed to second partition on eMMC. But at the moment we have only one partition in $partitions environment variable. Let's add "bootloader" partition prior to "rootfs", so that DFU works correctly. This also fixes eMMC boot, which looks for rootfs on second partition."bootloader" partition start corresponds to "u-boot.img.raw" in DFU eMMC info, which is
0x300sector (384 KiB offset from eMMC start).rootfs start address can be also found from DFU eMMC info. bootloader-related area is finished at
0x1500sector (2688 KiB offset from eMMC start). This should be the start address for rootfs in $partitions environment variable.While at it, fix U-Boot environment address to be the same as for AM57x EVM, so that it doesn't clash with other partitions.
So now eMMC layout looks like this:
=============================================================== 0 +------------------------+ | MBR/GPT header | 128 - 128 +------------------------+ | MLO | 256 - 384 +------------------------+ | u-boot.img | 1792 bootloader 2176 +------------------------+ | //////// hole //////// | 256 - 2432 +------------------------+ | U-Boot environment | 128 - 2560 +------------------------+ | U-Boot environment | 128 - | (redundant) | 2688 +------------------------+ | rootfs | remaining rootfs end +------------------------+ ==============================================================="hole" area can be used further for storing U-Boot environment (like it's done in AM57x EVM config file) or for increasing u-boot.img area (in case u-boot.img size increased, e.g. if new dtbs were added).
Quoted 5 lines
This commit conforms with Linux partition table from
f6d245b8c56c("arm: am57xx: Fix Linux boot from eMMC") commit, making things in uniform way.Signed-off-by Sam Protsenko <[email protected]>
Thanks and regards,
Lokesh
Quoted 55 lines
--- include/configs/am335x_evm.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)include/configs/am335x_evm.h +8
-5@@ -17,12 +17,13 @@#define __CONFIG_AM335X_EVM_H#include <configs/ti_am335x_common.h> +#include <linux/sizes.h> #ifndef CONFIG_SPL_BUILD # define CONFIG_TIMESTAMP #endif -#define CONFIG_SYS_BOOTM_LEN (16 << 20) +#define CONFIG_SYS_BOOTM_LEN SZ_16M#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM@@ -34,7 +35,7 @@#define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds"/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_ENV_SIZE SZ_128K#ifdef CONFIG_NAND #define NANDARGS \@@ -99,7 +100,9 @@"console=ttyO0,115200n8\0" \"partitions=" \"uuid_disk=${uuid_gpt_disk};" \ -"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ +"name=bootloader,start=384K,size=1792K," \ +"uuid=${uuid_gpt_bootloader};" \ +"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \"optargs=\0" \"ramroot=/dev/ram0 rw\0" \"ramrootfstype=ext2\0" \@@ -280,8 +283,8 @@#define CONFIG_ENV_OFFSET_REDUND (896 << 10)/* 896 KiB in */ #elif defined(CONFIG_EMMC_BOOT )#define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MMC_ENV_PART 2 -#define CONFIG_ENV_OFFSET 0x0 +#define CONFIG_SYS_MMC_ENV_PART 0 +#define CONFIG_ENV_OFFSET 0x260000#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)#define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_SYS_MMC_MAX_DEVICE 2
PATCH 1/1 am335x_evm: Consolidate eMMC partitions with DFU info
In reply to Sam ProtsenkoQuoted 44 lines · Sam Protsenko
From
DFU_ALT_INFO_EMMC(include/environment/ti/dfu.h) we can see that rootfs will be flashed to second partition on eMMC. But at the moment we have only one partition in $partitions environment variable. Let's add "bootloader" partition prior to "rootfs", so that DFU works correctly. This also fixes eMMC boot, which looks for rootfs on second partition."bootloader" partition start corresponds to "u-boot.img.raw" in DFU eMMC info, which is
0x300sector (384 KiB offset from eMMC start).rootfs start address can be also found from DFU eMMC info. bootloader-related area is finished at
0x1500sector (2688 KiB offset from eMMC start). This should be the start address for rootfs in $partitions environment variable.While at it, fix U-Boot environment address to be the same as for AM57x EVM, so that it doesn't clash with other partitions.
So now eMMC layout looks like this:
=============================================================== 0 +------------------------+ | MBR/GPT header | 128 - 128 +------------------------+ | MLO | 256 - 384 +------------------------+ | u-boot.img | 1792 bootloader 2176 +------------------------+ | //////// hole //////// | 256 - 2432 +------------------------+ | U-Boot environment | 128 - 2560 +------------------------+ | U-Boot environment | 128 - | (redundant) | 2688 +------------------------+ | rootfs | remaining rootfs end +------------------------+ ==============================================================="hole" area can be used further for storing U-Boot environment (like it's done in AM57x EVM config file) or for increasing u-boot.img area (in case u-boot.img size increased, e.g. if new dtbs were added).
Quoted 5 lines
This commit conforms with Linux partition table from
f6d245b8c56c("arm: am57xx: Fix Linux boot from eMMC") commit, making things in uniform way.Signed-off-by Sam Protsenko <[email protected]>
Signature · 1 line
Tom
PATCH 1/1 am335x_evm: Consolidate eMMC partitions with DFU info
Quoted 46 lines · Tom Rini
Quoted 44 lines · Sam Protsenko
From
DFU_ALT_INFO_EMMC(include/environment/ti/dfu.h) we can see that rootfs will be flashed to second partition on eMMC. But at the moment we have only one partition in $partitions environment variable. Let's add "bootloader" partition prior to "rootfs", so that DFU works correctly. This also fixes eMMC boot, which looks for rootfs on second partition."bootloader" partition start corresponds to "u-boot.img.raw" in DFU eMMC info, which is
0x300sector (384 KiB offset from eMMC start).rootfs start address can be also found from DFU eMMC info. bootloader-related area is finished at
0x1500sector (2688 KiB offset from eMMC start). This should be the start address for rootfs in $partitions environment variable.While at it, fix U-Boot environment address to be the same as for AM57x EVM, so that it doesn't clash with other partitions.
So now eMMC layout looks like this:
=============================================================== 0 +------------------------+ | MBR/GPT header | 128 - 128 +------------------------+ | MLO | 256 - 384 +------------------------+ | u-boot.img | 1792 bootloader 2176 +------------------------+ | //////// hole //////// | 256 - 2432 +------------------------+ | U-Boot environment | 128 - 2560 +------------------------+ | U-Boot environment | 128 - | (redundant) | 2688 +------------------------+ | rootfs | remaining rootfs end +------------------------+ ==============================================================="hole" area can be used further for storing U-Boot environment (like it's done in AM57x EVM config file) or for increasing u-boot.img area (in case u-boot.img size increased, e.g. if new dtbs were added).
Quoted 8 lines
Quoted 5 lines
This commit conforms with Linux partition table from
f6d245b8c56c("arm: am57xx: Fix Linux boot from eMMC") commit, making things in uniform way.Signed-off-by Sam Protsenko <[email protected]>Reviewed-by Tom Rini <[email protected]>
Hi Tom,
If there are no objections against this patch, can you please merge it? We are working on BBB-based course, and I would love to see it in v2018.03, so that students can checkout to that stable tag and have all needed BBB support in upstream.
Thanks!
Quoted 2 lines
--
Tom
Quoted 44 lines · Sam Protsenko
Quoted 1 line
From
DFU_ALT_INFO_EMMC(include/environment/ti/dfu.h) we can see thatrootfs will be flashed to second partition on eMMC. But at the moment we have only one partition in $partitions environment variable. Let's add "bootloader" partition prior to "rootfs", so that DFU works correctly. This also fixes eMMC boot, which looks for rootfs on second partition.
"bootloader" partition start corresponds to "u-boot.img.raw" in DFU eMMC info, which is
0x300sector (384 KiB offset from eMMC start).rootfs start address can be also found from DFU eMMC info. bootloader-related area is finished at
0x1500sector (2688 KiB offset from eMMC start). This should be the start address for rootfs in $partitions environment variable.While at it, fix U-Boot environment address to be the same as for AM57x EVM, so that it doesn't clash with other partitions.
So now eMMC layout looks like this:
=============================================================== 0 +------------------------+ | MBR/GPT header | 128 - 128 +------------------------+ | MLO | 256 - 384 +------------------------+ | u-boot.img | 1792 bootloader 2176 +------------------------+ | //////// hole //////// | 256 - 2432 +------------------------+ | U-Boot environment | 128 - 2560 +------------------------+ | U-Boot environment | 128 - | (redundant) | 2688 +------------------------+ | rootfs | remaining rootfs end +------------------------+ ==============================================================="hole" area can be used further for storing U-Boot environment (like it's done in AM57x EVM config file) or for increasing u-boot.img area (in case u-boot.img size increased, e.g. if new dtbs were added).
Quoted 7 lines
This commit conforms with Linux partition table from
f6d245b8c56c("arm: am57xx: Fix Linux boot from eMMC") commit, making things in uniform way.Signed-off-by Sam Protsenko <[email protected]>Reviewed-by Lokesh Vutla <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180215/0c8edf64/attachment.sig>