Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
PATCH 2/2 Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_BOOTCOUNT_SINGLEWORD
---
configs/highbank_defconfig | 1 + drivers/bootcount/Kconfig | 6 ++++++ include/configs/highbank.h | 1 - 3 files changed, 7 insertions(+), 1 deletion(-)
configs/highbank_defconfig +1 -0
@@ -25,6 +25,7 @@ CONFIG_EFI_PARTITION=y CONFIG_ENV_IS_IN_NVRAM=y CONFIG_SCSI_AHCI=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y # CONFIG_MMC is not set CONFIG_SCSI=y CONFIG_OF_LIBFDT=y
drivers/bootcount/Kconfig +6 -0
@@ -17,6 +17,12 @@ config BOOTCOUNT_LIMIT Enable checking for exceeding the boot count limit. More information: http://www.denx.de/wiki/DULG/UBootBootCountLimit +config SYS_BOOTCOUNT_SINGLEWORD + bool "Use single word to pack boot count and magic value" + help + This option enables packing boot count magic value and boot count + into single word (32 bits). + if BOOTCOUNT config BOOTCOUNT_EXT
include/configs/highbank.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }#define CONFIG_CONS_INDEX 0 -#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c
Signature · 1 line
2.11.0
PATCH 2/2 Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
Quoted 45 lines · Lukasz Majewski
This converts the following to
Kconfig:
CONFIG_SYS_BOOTCOUNT_SINGLEWORDSigned-off-by Lukasz Majewski <[email protected]>---
configs/highbank_defconfig | 1 + drivers/bootcount/Kconfig | 6 ++++++ include/configs/highbank.h | 1 - 3 files changed, 7 insertions(+), 1 deletion(-)configs/highbank_defconfig +1
-0@@ -25,6 +25,7 @@ CONFIG_EFI_PARTITION=y CONFIG_ENV_IS_IN_NVRAM=y CONFIG_SCSI_AHCI=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y # CONFIG_MMC is not set CONFIG_SCSI=y CONFIG_OF_LIBFDT=ydrivers/bootcount/Kconfig +6
-0@@ -17,6 +17,12 @@ config BOOTCOUNT_LIMIT Enable checking for exceeding the boot count limit. More information: http://www.denx.de/wiki/DULG/UBootBootCountLimit +config SYS_BOOTCOUNT_SINGLEWORD + bool "Use single word to pack boot count and magic value" + help + This option enables packing boot count magic value and boot count + into single word (32 bits). + if BOOTCOUNT config BOOTCOUNT_EXTinclude/configs/highbank.h +0
-0
include/configs/highbank.h line 31
Quoted 7 lines
include/configs/highbank.h +0
-1@@ -26,7 +26,6 @@#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }#define CONFIG_CONS_INDEX 0 -#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c
Signature · 1 line
Alex Kiernan
Ray
Reviewed-by Ian Ray on v1 2/2[U-Boot] EXT: Re: [PATCH 2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
Quoted 52 lines · Alex Kiernan
Quoted 48 lines · Lukasz Majewski
This converts the following to
Kconfig:
CONFIG_SYS_BOOTCOUNT_SINGLEWORDSigned-off-by Lukasz Majewski <[email protected]>---
configs/highbank_defconfig | 1 + drivers/bootcount/Kconfig | 6 ++++++ include/configs/highbank.h | 1 - 3 files changed, 7 insertions(+), 1 deletion(-)configs/highbank_defconfig +0
-0@@ -25,6 +25,7 @@ CONFIG_EFI_PARTITION=y
CONFIG_ENV_IS_IN_NVRAM=yCONFIG_SCSI_AHCI=yCONFIG_BOOTCOUNT_LIMIT=y+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y #CONFIG_MMCis not setCONFIG_SCSI=yCONFIG_OF_LIBFDT=ydrivers/bootcount/Kconfig +6
-0@@ -17,6 +17,12 @@ config BOOTCOUNT_LIMIT Enable checking for exceeding the boot count limit. More information: http://www.denx.de/wiki/DULG/UBootBootCountLimit +config SYS_BOOTCOUNT_SINGLEWORD + bool "Use single word to pack boot count and magic value" + help + This option enables packing boot count magic value and boot count + into single word (32 bits). +if BOOTCOUNT
config
BOOTCOUNT_EXTinclude/configs/highbank.h +0
-0@@ -26,7 +26,6 @@#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }#define CONFIG_CONS_INDEX 0
Quoted 7 lines
include/configs/highbank.h line 31
Quoted 4 lines
include/configs/highbank.h +0
-1-#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0cTested-by Alex Kiernan <[email protected]>
Quoted 2 lines
Signature · 1 line
Alex Kiernan
PATCH 2/2 Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
In reply to Lukasz MajewskiQuoted 6 lines · Lukasz Majewski
This converts the following to
Kconfig:
CONFIG_SYS_BOOTCOUNT_SINGLEWORDSigned-off-by Lukasz Majewski <[email protected]>Tested-by Alex Kiernan <[email protected]>Reviewed-by Ian Ray <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180215/da5bde7f/attachment.sig>