Skip to contentSkip to conversation

x86/smpboot: avoid warning messages while hot-removing physical cpu

PATCH RESEND New Masayoshi Mizuma 3 participants 4 messages Feb 8, 2018 – Feb 13, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 x86/smpboot: avoid warning messages while hot-removing physical cpu

From: Masayoshi Mizuma <[email protected]>

When a physical cpu is hot-removed, the following warning message are shown while the uncore device is removing in uncore_pci_remove().

WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988
uncore_pci_remove+0xf1/0x110
...
CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
...
Call Trace:
pci_device_remove+0x36/0xb0
device_release_driver_internal+0x145/0x210
pci_stop_bus_device+0x76/0xa0
pci_stop_root_bus+0x44/0x60
acpi_pci_root_remove+0x1f/0x80
acpi_bus_trim+0x54/0x90
acpi_bus_trim+0x2e/0x90
acpi_device_hotplug+0x2bc/0x4b0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x141/0x340
worker_thread+0x47/0x3e0
kthread+0xf5/0x130

When uncore_pci_remove() runs, it tries to get package id to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesage are shown because topology_phys_to_logical_pkg() returns -1.

  arch/x86/events/intel/uncore.c:
  static void uncore_pci_remove(struct pci_dev *pdev)
  {
  ...
          phys_id = uncore_pcibus_to_physid(pdev->bus);
  ...
                  pkg = topology_phys_to_logical_pkg(phys_id); //returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;
                                  break;
                          }
                  }
                  WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); //HERE!!

topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.

  arch/x86/kernel/smpboot.c:
  int topology_phys_to_logical_pkg(unsigned int phys_pkg)
  {
          int cpu;
          for_each_possible_cpu(cpu) {
                  struct cpuinfo_x86 *c = &cpu_data(cpu);
  
                  if (c->initialized && c->phys_proc_id == phys_pkg)
                          return c->logical_proc_id;
          }
          return -1;

}

However, the phys_proc_id is already set to 0 by remove_siblinginfo() when the cpu was offlined.
So, topology_phys_to_logical_pkg() cannot find correct the logical_proc_id and always returns -1.
As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown.

To avoid this, remove the setting from remove_siblinginfo(). There is no influence about the removing because phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding.

Fixes 30bb9811856f ("x86/topology: Avoid wasting 128k for package id array")
---
 arch/x86/kernel/smpboot.c | 1 -
 1 file changed, 1 deletion(-)
arch/x86/kernel/smpboot.c +0 -1
index ed556d5..844279c 100644
@@ -1431,7 +1431,6 @@ static void remove_siblinginfo(int cpu)
 	cpumask_clear(cpu_llc_shared_mask(cpu));
 	cpumask_clear(topology_sibling_cpumask(cpu));
 	cpumask_clear(topology_core_cpumask(cpu));
-	c->phys_proc_id = 0;
 	c->cpu_core_id = 0;
 	cpumask_clear_cpu(cpu, cpu_sibling_setup_mask);
 	recompute_smt_state();
Signature · 3 lines
1.8.3.1

- Masayoshi
#1 lore raw

PATCH 1/1 x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU

Quoted 69 lines · Masayoshi Mizuma

From: Masayoshi Mizuma <[email protected]>

When a physical cpu is hot-removed, the following warning message are shown while the uncore device is removing in uncore_pci_remove().

WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988
uncore_pci_remove+0xf1/0x110
...
CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
...
Call Trace:
pci_device_remove+0x36/0xb0
device_release_driver_internal+0x145/0x210
pci_stop_bus_device+0x76/0xa0
pci_stop_root_bus+0x44/0x60
acpi_pci_root_remove+0x1f/0x80
acpi_bus_trim+0x54/0x90
acpi_bus_trim+0x2e/0x90
acpi_device_hotplug+0x2bc/0x4b0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x141/0x340
worker_thread+0x47/0x3e0
kthread+0xf5/0x130

When uncore_pci_remove() runs, it tries to get package id to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesage are shown because topology_phys_to_logical_pkg() returns -1.

  arch/x86/events/intel/uncore.c:
  static void uncore_pci_remove(struct pci_dev *pdev)
  {
  ...
          phys_id = uncore_pcibus_to_physid(pdev->bus);
  ...
                  pkg = topology_phys_to_logical_pkg(phys_id); //returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;
                                  break;
                          }
                  }
                  WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); //HERE!!

topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.

  arch/x86/kernel/smpboot.c:
  int topology_phys_to_logical_pkg(unsigned int phys_pkg)
  {
          int cpu;
          for_each_possible_cpu(cpu) {
                  struct cpuinfo_x86 *c = &cpu_data(cpu);
  
                  if (c->initialized && c->phys_proc_id == phys_pkg)
                          return c->logical_proc_id;
          }
          return -1;

}

However, the phys_proc_id is already set to 0 by remove_siblinginfo() when the cpu was offlined.
So, topology_phys_to_logical_pkg() cannot find correct the logical_proc_id and always returns -1.
As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown.

Quoted 3 lines

To avoid this, remove the setting from remove_siblinginfo(). There is no influence about the removing because phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding.

So I think this fix goes beyond fixing a 'warning', if we get -1 for 'pkg':

Quoted 4 lines
                  pkg = topology_phys_to_logical_pkg(phys_id); //returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;

... then that creates two _real_ bugs AFAICS:

1) we dereference uncore_extra_pci_dev[] with a negative index

2) we fail to clean up a stale pointer in uncore_extra_pci_dev[][]

So I've rewritten your changelog accordingly - see the attached patch.

I have also added a Cc: stable tag.

Thanks,

Ingo

===================>

Quoted 1 line

From 295cc7eb314eb3321fb6d67ca6f7305f5c50d10f Mon Sep 17 00:00:00 2001

From: Masayoshi Mizuma <[email protected]>
Date: Thu, 8 Feb 2018 09:19:08 -0500
Subject: [PATCH] x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU

When a physical CPU is hot-removed, the following warning messages are shown while the uncore device is removed in uncore_pci_remove():

  WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988
  uncore_pci_remove+0xf1/0x110
  ...
  CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1
  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  ...
  Call Trace:
  pci_device_remove+0x36/0xb0
  device_release_driver_internal+0x145/0x210
  pci_stop_bus_device+0x76/0xa0
  pci_stop_root_bus+0x44/0x60
  acpi_pci_root_remove+0x1f/0x80
  acpi_bus_trim+0x54/0x90
  acpi_bus_trim+0x2e/0x90
  acpi_device_hotplug+0x2bc/0x4b0
  acpi_hotplug_work_fn+0x1a/0x30
  process_one_work+0x141/0x340
  worker_thread+0x47/0x3e0
  kthread+0xf5/0x130

When uncore_pci_remove() runs, it tries to get the package ID to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesages are shown because topology_phys_to_logical_pkg() returns -1.

  arch/x86/events/intel/uncore.c:
  static void uncore_pci_remove(struct pci_dev *pdev)
  {
  ...
          phys_id = uncore_pcibus_to_physid(pdev->bus);
  ...
                  pkg = topology_phys_to_logical_pkg(phys_id); // returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;
                                  break;
                          }
                  }
                  WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); // <=========== HERE!!

topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.

  arch/x86/kernel/smpboot.c:
  int topology_phys_to_logical_pkg(unsigned int phys_pkg)
  {
          int cpu;
          for_each_possible_cpu(cpu) {
                  struct cpuinfo_x86 *c = &cpu_data(cpu);

                  if (c->initialized && c->phys_proc_id == phys_pkg)
                          return c->logical_proc_id;
          }
          return -1;

}

However, the phys_proc_id was already set to 0 by remove_siblinginfo() when the CPU was offlined.

So, topology_phys_to_logical_pkg() cannot find the correct logical_proc_id and always returns -1.

As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown.

What is worse is that the bogus 'pkg' index results in two bugs:

- We dereference uncore_extra_pci_dev[] with a negative index
- We fail to clean up a stale pointer in uncore_extra_pci_dev[][]

To fix these bugs, remove the clearing of ->phys_proc_id from remove_siblinginfo().

This should not cause any problems, because ->phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding.

Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Fixes 30bb9811856f ("x86/topology: Avoid wasting 128k for package id array")
---
 arch/x86/kernel/smpboot.c | 1 -
 1 file changed, 1 deletion(-)
arch/x86/kernel/smpboot.c +0 -1
index 6f27facbaa9b..cfc61e1d45e2 100644
@@ -1430,7 +1430,6 @@ static void remove_siblinginfo(int cpu)
 	cpumask_clear(cpu_llc_shared_mask(cpu));
 	cpumask_clear(topology_sibling_cpumask(cpu));
 	cpumask_clear(topology_core_cpumask(cpu));
-	c->phys_proc_id = 0;
 	c->cpu_core_id = 0;
 	cpumask_clear_cpu(cpu, cpu_sibling_setup_mask);
 	recompute_smt_state();
#2 lore raw

Re: [PATCH] x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU

Hello Ingo,

Quoted 3 lines

So I've rewritten your changelog accordingly - see the attached patch.

I have also added a Cc: stable tag.

Thanks a lot!

- Masayoshi

Quoted 208 lines · Tue, 13 Feb 2018 12:48:41 +0100 Ingo Molnar wrote:
Quoted 69 lines · Masayoshi Mizuma

From: Masayoshi Mizuma <[email protected]>

When a physical cpu is hot-removed, the following warning message are shown while the uncore device is removing in uncore_pci_remove().

WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988
uncore_pci_remove+0xf1/0x110
...
CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
...
Call Trace:
pci_device_remove+0x36/0xb0
device_release_driver_internal+0x145/0x210
pci_stop_bus_device+0x76/0xa0
pci_stop_root_bus+0x44/0x60
acpi_pci_root_remove+0x1f/0x80
acpi_bus_trim+0x54/0x90
acpi_bus_trim+0x2e/0x90
acpi_device_hotplug+0x2bc/0x4b0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x141/0x340
worker_thread+0x47/0x3e0
kthread+0xf5/0x130

When uncore_pci_remove() runs, it tries to get package id to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesage are shown because topology_phys_to_logical_pkg() returns -1.

  arch/x86/events/intel/uncore.c:
  static void uncore_pci_remove(struct pci_dev *pdev)
  {
  ...
          phys_id = uncore_pcibus_to_physid(pdev->bus);
  ...
                  pkg = topology_phys_to_logical_pkg(phys_id); //returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;
                                  break;
                          }
                  }
                  WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); //HERE!!

topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.

  arch/x86/kernel/smpboot.c:
  int topology_phys_to_logical_pkg(unsigned int phys_pkg)
  {
          int cpu;
          for_each_possible_cpu(cpu) {
                  struct cpuinfo_x86 *c = &cpu_data(cpu);
  
                  if (c->initialized && c->phys_proc_id == phys_pkg)
                          return c->logical_proc_id;
          }
          return -1;

}

However, the phys_proc_id is already set to 0 by remove_siblinginfo() when the cpu was offlined.
So, topology_phys_to_logical_pkg() cannot find correct the logical_proc_id and always returns -1.
As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown.

Quoted 3 lines

To avoid this, remove the setting from remove_siblinginfo(). There is no influence about the removing because phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding.

So I think this fix goes beyond fixing a 'warning', if we get -1 for 'pkg':

Quoted 4 lines
                  pkg = topology_phys_to_logical_pkg(phys_id); //returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;

... then that creates two _real_ bugs AFAICS:

1) we dereference uncore_extra_pci_dev[] with a negative index

2) we fail to clean up a stale pointer in uncore_extra_pci_dev[][]

So I've rewritten your changelog accordingly - see the attached patch.

I have also added a Cc: stable tag

Thanks,

Ingo

===================>
From 295cc7eb314eb3321fb6d67ca6f7305f5c50d10f Mon Sep 17 00:00:00 2001
From: Masayoshi Mizuma <[email protected]>
Date: Thu, 8 Feb 2018 09:19:08 -0500
Subject: [PATCH] x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU

When a physical CPU is hot-removed, the following warning messages are shown while the uncore device is removed in uncore_pci_remove():

  WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988
  uncore_pci_remove+0xf1/0x110
  ...
  CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1
  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  ...
  Call Trace:
  pci_device_remove+0x36/0xb0
  device_release_driver_internal+0x145/0x210
  pci_stop_bus_device+0x76/0xa0
  pci_stop_root_bus+0x44/0x60
  acpi_pci_root_remove+0x1f/0x80
  acpi_bus_trim+0x54/0x90
  acpi_bus_trim+0x2e/0x90
  acpi_device_hotplug+0x2bc/0x4b0
  acpi_hotplug_work_fn+0x1a/0x30
  process_one_work+0x141/0x340
  worker_thread+0x47/0x3e0
  kthread+0xf5/0x130

When uncore_pci_remove() runs, it tries to get the package ID to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesages are shown because topology_phys_to_logical_pkg() returns -1.

  arch/x86/events/intel/uncore.c:
  static void uncore_pci_remove(struct pci_dev *pdev)
  {
  ...
          phys_id = uncore_pcibus_to_physid(pdev->bus);
  ...
                  pkg = topology_phys_to_logical_pkg(phys_id); // returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;
                                  break;
                          }
                  }
                  WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); // <=========== HERE!!

topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.

  arch/x86/kernel/smpboot.c:
  int topology_phys_to_logical_pkg(unsigned int phys_pkg)
  {
          int cpu;
          for_each_possible_cpu(cpu) {
                  struct cpuinfo_x86 *c = &cpu_data(cpu);

                  if (c->initialized && c->phys_proc_id == phys_pkg)
                          return c->logical_proc_id;
          }
          return -1;

}

However, the phys_proc_id was already set to 0 by remove_siblinginfo() when the CPU was offlined.

So, topology_phys_to_logical_pkg() cannot find the correct logical_proc_id and always returns -1.

As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown.

What is worse is that the bogus 'pkg' index results in two bugs:

- We dereference uncore_extra_pci_dev[] with a negative index
- We fail to clean up a stale pointer in uncore_extra_pci_dev[][]

To fix these bugs, remove the clearing of ->phys_proc_id from remove_siblinginfo().

This should not cause any problems, because ->phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding.

Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Fixes 30bb9811856f ("x86/topology: Avoid wasting 128k for package id array")
---
 arch/x86/kernel/smpboot.c | 1 -
 1 file changed, 1 deletion(-)
arch/x86/kernel/smpboot.c +0 -1
index 6f27facbaa9b..cfc61e1d45e2 100644
@@ -1430,7 +1430,6 @@ static void remove_siblinginfo(int cpu)
 	cpumask_clear(cpu_llc_shared_mask(cpu));
 	cpumask_clear(topology_sibling_cpumask(cpu));
 	cpumask_clear(topology_core_cpumask(cpu));
-	c->phys_proc_id = 0;
 	c->cpu_core_id = 0;
 	cpumask_clear_cpu(cpu, cpu_sibling_setup_mask);
 	recompute_smt_state();
#3 lore raw

[tip:x86/urgent] x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU

In reply to Masayoshi Mizuma
x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU
Commit-ID:  295cc7eb314eb3321fb6d67ca6f7305f5c50d10f
Gitweb:     https://git.kernel.org/tip/295cc7eb314eb3321fb6d67ca6f7305f5c50d10f
Author:     Masayoshi Mizuma <[email protected]>
AuthorDate: Thu, 8 Feb 2018 09:19:08 -0500
Committer:  Ingo Molnar <[email protected]>
CommitDate: Tue, 13 Feb 2018 12:47:28 +0100

x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU

When a physical CPU is hot-removed, the following warning messages are shown while the uncore device is removed in uncore_pci_remove():

  WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988
  uncore_pci_remove+0xf1/0x110
  ...
  CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1
  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  ...
  Call Trace:
  pci_device_remove+0x36/0xb0
  device_release_driver_internal+0x145/0x210
  pci_stop_bus_device+0x76/0xa0
  pci_stop_root_bus+0x44/0x60
  acpi_pci_root_remove+0x1f/0x80
  acpi_bus_trim+0x54/0x90
  acpi_bus_trim+0x2e/0x90
  acpi_device_hotplug+0x2bc/0x4b0
  acpi_hotplug_work_fn+0x1a/0x30
  process_one_work+0x141/0x340
  worker_thread+0x47/0x3e0
  kthread+0xf5/0x130

When uncore_pci_remove() runs, it tries to get the package ID to clear the value of uncore_extra_pci_dev[].dev[] by using topology_phys_to_logical_pkg(). The warning messesages are shown because topology_phys_to_logical_pkg() returns -1.

  arch/x86/events/intel/uncore.c:
  static void uncore_pci_remove(struct pci_dev *pdev)
  {
  ...
          phys_id = uncore_pcibus_to_physid(pdev->bus);
  ...
                  pkg = topology_phys_to_logical_pkg(phys_id); // returns -1
                  for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
                          if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
                                  uncore_extra_pci_dev[pkg].dev[i] = NULL;
                                  break;
                          }
                  }
                  WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); // <=========== HERE!!

topology_phys_to_logical_pkg() tries to find cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.

  arch/x86/kernel/smpboot.c:
  int topology_phys_to_logical_pkg(unsigned int phys_pkg)
  {
          int cpu;
          for_each_possible_cpu(cpu) {
                  struct cpuinfo_x86 *c = &cpu_data(cpu);

                  if (c->initialized && c->phys_proc_id == phys_pkg)
                          return c->logical_proc_id;
          }
          return -1;

}

However, the phys_proc_id was already set to 0 by remove_siblinginfo() when the CPU was offlined.

So, topology_phys_to_logical_pkg() cannot find the correct logical_proc_id and always returns -1.

As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning messages are shown.

What is worse is that the bogus 'pkg' index results in two bugs:

- We dereference uncore_extra_pci_dev[] with a negative index
- We fail to clean up a stale pointer in uncore_extra_pci_dev[][]

To fix these bugs, remove the clearing of ->phys_proc_id from remove_siblinginfo().

This should not cause any problems, because ->phys_proc_id is not used after it is hot-removed and it is re-set while hot-adding.

Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Fixes 30bb9811856f ("x86/topology: Avoid wasting 128k for package id array")
---
 arch/x86/kernel/smpboot.c | 1 -
 1 file changed, 1 deletion(-)
arch/x86/kernel/smpboot.c +0 -1
index 6f27fac..cfc61e1 100644
@@ -1430,7 +1430,6 @@ static void remove_siblinginfo(int cpu)
 	cpumask_clear(cpu_llc_shared_mask(cpu));
 	cpumask_clear(topology_sibling_cpumask(cpu));
 	cpumask_clear(topology_core_cpumask(cpu));
-	c->phys_proc_id = 0;
 	c->cpu_core_id = 0;
 	cpumask_clear_cpu(cpu, cpu_sibling_setup_mask);
 	recompute_smt_state();