tpm: fix intermittent failure with self tests
Subsystems (2)
James Bottomley
maintainerPATCH v3 1/1 tpm: fix intermittent failure with self tests
Ever since
commit 2482b1bba5122b1d5516c909832bdd282015b8e9
Author: Alexander Steffen <[email protected]> Date: Thu Aug 31 19:18:56 2017 +0200
tpm: Trigger only missing TPM 2.0 self tests
My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work (necessitating a reboot). The problem seems to be that the TPM gets into a state where the partial self-test doesn't return TPM_RC_SUCCESS (meaning all tests have run to completion), but instead returns TPM_RC_TESTING (meaning some tests are still running in the background). There are various theories that resending the self-test command actually causes the tests to restart and thus triggers more TPM_RC_TESTING returns until the timeout is exceeded.
There are several issues here: firstly being we shouldn't slow down the boot sequence waiting for the self test to complete once the TPM backgrounds them. It will actually make available all functions that have passed and if it gets a failure return TPM_RC_FAILURE to every subsequent command. So the fix is to kick off self tests once and if they return TPM_RC_TESTING log that as a backgrounded self test and continue on. In order to prevent other tpm users from seeing any TPM_RC_TESTING returns (which it might if they send a command that needs a TPM subsystem which is still under test), we loop in tpm_transmit_cmd until either a timeout or we don't get a TPM_RC_TESTING return.
Finally, there have been observations of strange returns from a partial test. One Nuvoton is occasionally returning TPM_RC_COMMAND_CODE, so treat any unexpected return from a partial self test as an indication we need to run a full self test.
---
v3: - must pass through TPM2_RC_INTIALIZE
v2: - review feedback: encapsulate transmission and rename NOWAIT constant
- Rewrite selftest routine to run full test on any unexpected (meaning not TPM2_RC_TESTING, TPM2_RC_SUCCESS or TPM2_RC_FAILURE) from the partial selftest.
--- drivers/char/tpm/tpm-interface.c | 37 ++++++++++++++++++++++++++++- drivers/char/tpm/tpm.h | 6 +++-- drivers/char/tpm/tpm2-cmd.c | 50 ++++++++++++++++++++++++++++++---------- 3 files changed, 78 insertions(+), 15 deletions(-)
drivers/char/tpm/tpm-interface.c +36 -1
@@ -515,6 +515,41 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,return rc ? rc : len; } +static ssize_t tpm_transmit_check (struct tpm_chip *chip, +struct tpm_space *space,const void *buf, +size_t bufsiz,unsigned int flags) +{ +const struct tpm_output_header *header = buf; +unsigned int delay_msec =20 ; +ssize_t len; +u32 err; + +/* +* on first probe we kick off a TPM self test in the +* background This means the TPM may return RC_TESTING to any +* command that tries to use a subsystem under test, so do an +* exponential backoff wait if that happens +*/ +for (;;) { + len =tpm_transmit (chip, space, (u8 *)buf, bufsiz, flags); +if (len <0 ) +return len; + + err =be32_to_cpu (header->return_code); +if (err !=TPM2_RC_TESTING || + (flags &TPM_TRANSMIT_NO_WAIT_TESTING )) +break ; + + delay_msec *=2 ; +if (delay_msec >TPM2_DURATION_LONG ) { +dev_err (&chip->dev,"TPM: still running self tests, giving up waiting\n" ); +break ; + } +tpm_msleep (delay_msec); + } +return len; +} +/** * tmp_transmit_cmd - send a tpm command to the device * The function extracts tpm out header return code
@@ -540,7 +575,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,int err;ssize_t len; - len =tpm_transmit (chip, space, (u8 *)buf, bufsiz, flags); + len =tpm_transmit_check (chip, space, buf, bufsiz, flags);if (len <0 )return len;
drivers/char/tpm/tpm.h +4 -2
@@ -104,6 +104,7 @@ enum tpm2_return_codes {TPM2_RC_HASH =0x0083 ,/* RC_FMT1 */ TPM2_RC_HANDLE =0x008B ,TPM2_RC_INITIALIZE =0x0100 ,/* RC_VER1 */ +TPM2_RC_FAILURE =0x0101 ,TPM2_RC_DISABLED =0x0120 ,TPM2_RC_COMMAND_CODE =0x0143 , TPM2_RC_TESTING = 0x090A, /* RC_WARN */
@@ -499,8 +500,9 @@ extern const struct file_operations tpmrm_fops;extern struct idr dev_nums_idr;enum tpm_transmit_flags { -TPM_TRANSMIT_UNLOCKED =BIT (0 ), -TPM_TRANSMIT_RAW =BIT (1 ), +TPM_TRANSMIT_UNLOCKED =BIT (0 ), +TPM_TRANSMIT_RAW =BIT (1 ), +TPM_TRANSMIT_NO_WAIT_TESTING =BIT (2 ), }; ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
drivers/char/tpm/tpm2-cmd.c +38 -12
67 lines not on this page · raw message
Signature · 1 line
2.12.3
I get merge conflicts in my tree but I'll review this.
Quoted 56 lines · James Bottomley
Ever since
commit
2482b1bba5122b1d5516c909832bdd282015b8e9Author: Alexander Steffen <[email protected]> Date: Thu Aug 31 19:18:56 2017 +0200tpm: Trigger only missing TPM 2.0 self tests
My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work (necessitating a reboot). The problem seems to be that the TPM gets into a state where the partial self-test doesn't return
TPM_RC_SUCCESS(meaning all tests have run to completion), but instead returnsTPM_RC_TESTING(meaning some tests are still running in the background). There are various theories that resending the self-test command actually causes the tests to restart and thus triggers moreTPM_RC_TESTINGreturns until the timeout is exceeded.There are several issues here: firstly being we shouldn't slow down the boot sequence waiting for the self test to complete once the TPM backgrounds them. It will actually make available all functions that have passed and if it gets a failure return
TPM_RC_FAILUREto every subsequent command. So the fix is to kick off self tests once and if they returnTPM_RC_TESTINGlog that as a backgrounded self test and continue on. In order to prevent other tpm users from seeing anyTPM_RC_TESTINGreturns (which it might if they send a command that needs a TPM subsystem which is still under test), we loop intpm_transmit_cmduntil either a timeout or we don't get aTPM_RC_TESTINGreturn.Finally, there have been observations of strange returns from a partial test. One Nuvoton is occasionally returning
TPM_RC_COMMAND_CODE, so treat any unexpected return from a partial self test as an indication we need to run a full self test.Signed-off-by James Bottomley <[email protected]>Fixes 2482b1bba5122b1d5516c909832bdd282015b8e9---
v3: - must pass throughTPM2_RC_INTIALIZE
v2: - review feedback: encapsulate transmission and rename NOWAIT constant
- Rewrite selftest routine to run full test on any unexpected (meaning notTPM2_RC_TESTING,TPM2_RC_SUCCESSorTPM2_RC_FAILURE) from the partial selftest.--- drivers/char/tpm/tpm-interface.c | 37 ++++++++++++++++++++++++++++- drivers/char/tpm/tpm.h | 6 +++-- drivers/char/tpm/tpm2-cmd.c | 50 ++++++++++++++++++++++++++++++---------(quoted diff) +0
-1- 3 files changed, 78 insertions(+), 15 deletions(-)drivers/char/tpm/tpm- renamed from drivers/char/tpm/tpm-interface.c +0
-0
interface.c
index9e80a953d693..b9a8914b05d9100644
drivers/char/tpm/tpm-interface.c ssize_t tpm_transmit(struct tpm_chip *chip, struct · line 521
Quoted 7 lines
drivers/char/tpm/tpm-interface.c +3
-0@@ -515,6 +515,41 @@ ssize_t tpm_transmit(struct tpm_chip *chip, structtpm_space *space, return rc ? rc : len; } +static ssize_t tpm_transmit_check (struct tpm_chip *chip, +struct tpm_space *space,const void *buf, +size_t bufsiz,unsigned int flags)
I would like this function to be renamed as tpm_transmit() and the current tpm_transmit() as tpm_try_transmit(). That would be a more understandable naming. I think also that both functions would deserve documentation because the behavior is starting to become fairly complex.
drivers/char/tpm/tpm-interface.c ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space, · line 532
Quoted 12 lines
drivers/char/tpm/tpm-interface.c +12
-0+{ +const struct tpm_output_header *header = buf; +unsigned int delay_msec =20 ; +ssize_t len; +u32 err; + +/* +* on first probe we kick off a TPM self test in the +* background This means the TPM may return RC_TESTING to any +* command that tries to use a subsystem under test, so do an +* exponential backoff wait if that happens +*/
This could be part of kdoc.
Quoted 4 lines
drivers/char/tpm/tpm-interface.c +4
-0+for (;;) { + len =tpm_transmit (chip, space, (u8 *)buf, bufsiz, flags); +if (len <0 ) +return len;
drivers/char/tpm/tpm-interface.c ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
Quoted 10 lines
drivers/char/tpm/tpm-interface.c +9
-0+ + err =be32_to_cpu (header->return_code); +if (err !=TPM2_RC_TESTING || + (flags &TPM_TRANSMIT_NO_WAIT_TESTING )) +break ; + + delay_msec *=2 ; + if (delay_msec > TPM2_DURATION_LONG) { + dev_err(&chip->dev,"TPM: still running self tests, giving up waiting\n");
's/TPM://'
Quoted 52 lines
drivers/char/tpm/tpm-interface.c +7
-0+break ; + } +tpm_msleep (delay_msec); + } +return len; +} +/** *
tmp_transmit_cmd- send a tpm command to the device
* The function extracts tpm out header return codedrivers/char/tpm/tpm-interface.c +1
-1@@ -540,7 +575,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, structtpm_space *space, int err;ssize_t len; - len =tpm_transmit (chip, space, (u8 *)buf, bufsiz, flags); + len =tpm_transmit_check (chip, space, buf, bufsiz, flags);if (len <0 )return len;drivers/char/tpm/tpm.h +4
-2@@ -104,6 +104,7 @@ enum tpm2_return_codes {TPM2_RC_HASH =0x0083 ,/* RC_FMT1 */ TPM2_RC_HANDLE =0x008B ,TPM2_RC_INITIALIZE =0x0100 ,/* RC_VER1 */ +TPM2_RC_FAILURE =0x0101 ,TPM2_RC_DISABLED =0x0120 ,TPM2_RC_COMMAND_CODE =0x0143 , TPM2_RC_TESTING = 0x090A, /* RC_WARN */@@ -499,8 +500,9 @@ extern const struct file_operations tpmrm_fops;extern struct idr dev_nums_idr;enum tpm_transmit_flags { -TPM_TRANSMIT_UNLOCKED =BIT (0 ), -TPM_TRANSMIT_RAW =BIT (1 ), +TPM_TRANSMIT_UNLOCKED =BIT (0 ), +TPM_TRANSMIT_RAW =BIT (1 ), +TPM_TRANSMIT_NO_WAIT_TESTING =BIT (2 ), }; ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,drivers/char/tpm/tpm2-cmd.c +0
-0@@ -838,29 +838,55 @@ EXPORT_SYMBOL_GPL(tpm2_calc_ordinal_duration);static int tpm2_do_selftest (struct tpm_chip *chip) {int rc;
drivers/char/tpm/tpm2-cmd.c EXPORT_SYMBOL_GPL(tpm2_calc_ordinal_duration); · line 846
Quoted 10 lines
drivers/char/tpm/tpm2-cmd.c +4
-4-unsigned int delay_msec =10 ; -long duration;struct tpm_buf buf; +int full_test; - duration =jiffies_to_msecs ( -tpm2_calc_ordinal_duration (chip,TPM2_CC_SELF_TEST )); +for (full_test =0 ; full_test <2 ; full_test++) { +const char *test_str = full_test ? +"full selftest" :"incremental selftest" ;
This code is too "clever" without much of a real purpose. A better idea would be to have a helper function for sending the self-test command and just call it twice.
Quoted 55 lines
drivers/char/tpm/tpm2-cmd.c +34
-8-for (;;) { rc =tpm_buf_init (&buf,TPM2_ST_NO_SESSIONS ,TPM2_CC_SELF_TEST );if (rc)return rc; -/* Perform tests in the background. */ -tpm_buf_append_u8 (&buf,0 ); +tpm_buf_append_u8 (&buf, full_test); +dev_info (&chip->dev,"TPM: running %s\n" , test_str); rc =tpm_transmit_cmd (chip,NULL , buf.data,PAGE_SIZE ,0 ,0 , -"continue selftest" ); + test_str);tpm_buf_destroy (&buf); -if (rc !=TPM2_RC_TESTING || delay_msec >= duration) + +if (rc ==TPM2_RC_INITIALIZE ) +/* TPM needs startup command */ +return rc; + +if (rc ==TPM2_RC_TESTING ) { +/* +* A return of RC_TESTING means the TPM is still +* running self tests. If one fails it will go into +* failure mode and return RC_FAILED to every command, +* so treat a still in testing return as a success +* rather than causing a driver detach. +*/ +dev_info (&chip->dev,"TPM: Running self test in background\n"); + rc =TPM2_RC_SUCCESS ; + } +if (rc ==TPM2_RC_SUCCESS )break ; -/* wait longer than before */ - delay_msec *=2 ; -tpm_msleep (delay_msec); +dev_info (&chip->dev,"TPM: %s failed\n" , test_str); + } + +if (rc ==TPM2_RC_SUCCESS ) { +dev_info (&chip->dev,"TPM: selftest succeeded\n" ); + }else if (rc ==TPM2_RC_FAILURE ) { +dev_err (&chip->dev,"TPM: selftest failed\n" ); + }else { +/* +* Any other error code is unexpected but should not +* prevent the driver from attaching +*/ +dev_err (&chip->dev,"TPM: selftest returns 0x%x, continuing anyway\n", rc); + rc =TPM2_RC_SUCCESS ;
Quoted 1 line
}
Are these messages mandatory given that tpm_transmit_cmd() already prints an error message? Could some or all of them removed?
Some other notes:
* tpm_transmit_cmd() uses %d as formatting while this uses %x
* Here it is called "selftest" and in the messages above it is called "self test".
/Jarkko
James Bottomley
maintainerQuoted 1 line · Jarkko Sakkinen
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
https://patchwork.kernel.org/patch/10208965/
If you put it in your tree, I can just rebase on top of everything.
James
Quoted 10 lines · James Bottomley
Quoted 1 line · Jarkko Sakkinen
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
https://patchwork.kernel.org/patch/10208965/
If you put it in your tree, I can just rebase on top of everything.
James
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
Jarkko Sakkinen
Tested-byQuoted 8 lines · Jarkko Sakkinen
Quoted 7 lines · James Bottomley
Quoted 1 line · Jarkko Sakkinen
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
Quoted 7 lines
Quoted 3 lines
If you put it in your tree, I can just rebase on top of everything.
James
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
/Jarkko
Quoted 13 lines · Jarkko Sakkinen
Quoted 12 lines · Jarkko Sakkinen
Quoted 10 lines · James Bottomley
Quoted 1 line · Jarkko Sakkinen
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
https://patchwork.kernel.org/patch/10208965/
If you put it in your tree, I can just rebase on top of everything.
James
Quoted 7 lines
Quoted 3 lines
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
Tested-by Jarkko Sakkinen <[email protected]>/Jarkko
These must be taken away:
[ 2.843641] tpm tpm0: TPM: running incremental selftest [ 2.854087] tpm tpm0: TPM: selftest succeeded
/Jarkko
Quoted 20 lines · Jarkko Sakkinen
Quoted 19 lines · Jarkko Sakkinen
Quoted 8 lines · Jarkko Sakkinen
Quoted 7 lines · James Bottomley
Quoted 1 line · Jarkko Sakkinen
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
Quoted 7 lines
Quoted 3 lines
If you put it in your tree, I can just rebase on top of everything.
James
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
Tested-by Jarkko Sakkinen <[email protected]>
Quoted 8 lines
Quoted 1 line
/Jarkko
These must be taken away:
[ 2.843641] tpm tpm0: TPM: running incremental selftest [ 2.854087] tpm tpm0: TPM: selftest succeeded/Jarkko
Right and I tested this with Kabylake XPS13/PTT.
/Jarkko
James Bottomley
maintainerQuoted 24 lines · Jarkko Sakkinen
Quoted 23 lines · Jarkko Sakkinen
Quoted 20 lines · Jarkko Sakkinen
Quoted 8 lines · James Bottomley
Quoted 2 lines · Jarkko Sakkinen
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
Quoted 6 lines
https://patchwork.kernel.org/patch/10208965/
If you put it in your tree, I can just rebase on top of everything.
James
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
Quoted 8 lines
Quoted 3 lines
Tested-by Jarkko Sakkinen <[email protected]>/Jarkko
These must be taken away:
[ 2.843641] tpm tpm0: TPM: running incremental selftest [ 2.854087] tpm tpm0: TPM: selftest succeeded
I'm not wedded to having the messages, but it helps give context when something like this happens:
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2) [ 1.550108] tpm tpm0: TPM: running incremental selftest [ 1.602294] tpm tpm0: A TPM error (323) occurred incremental selftest [ 1.602320] tpm tpm0: TPM: incremental selftest failed [ 1.602322] tpm tpm0: TPM: running full selftest [ 2.523689] tpm tpm0: TPM: selftest succeeded
It also helps explain why I lost a second in the boot sequence to the TPM having to run a full self test.
Without the chatty messages, what you see is
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2)
[
1.602294] tpm tpm0: A TPM error (323) occurred incremental selftest
Which is a bit harder to interpret.
James
Quoted 49 lines · James Bottomley
Quoted 24 lines · Jarkko Sakkinen
Quoted 23 lines · Jarkko Sakkinen
Quoted 20 lines · Jarkko Sakkinen
Quoted 8 lines · James Bottomley
Quoted 2 lines · Jarkko Sakkinen
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
Quoted 6 lines
https://patchwork.kernel.org/patch/10208965/
If you put it in your tree, I can just rebase on top of everything.
James
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
Quoted 8 lines
Quoted 3 lines
Tested-by Jarkko Sakkinen <[email protected]>/Jarkko
These must be taken away:
[ 2.843641] tpm tpm0: TPM: running incremental selftest [ 2.854087] tpm tpm0: TPM: selftest succeededI'm not wedded to having the messages, but it helps give context when something like this happens:
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2) [ 1.550108] tpm tpm0: TPM: running incremental selftest [ 1.602294] tpm tpm0: A TPM error (323) occurred incremental selftest [ 1.602320] tpm tpm0: TPM: incremental selftest failed [ 1.602322] tpm tpm0: TPM: running full selftest [ 2.523689] tpm tpm0: TPM: selftest succeededIt also helps explain why I lost a second in the boot sequence to the TPM having to run a full self test.
Without the chatty messages, what you see is
Quoted 7 lines
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2)[
1.602294] tpm tpm0: A TPM error (323) occurred incremental selftestWhich is a bit harder to interpret.
James
Way too much bloat to klog. Telling whether the full or incremental test failed makes sense. Otherwise, not so much.
I updated the patch (v4) with things cleaned up that add bloat to the driver code and squashed tpm_buf patch to it.
/Jarkko
Dera Jarkko,
Am 21.02.2018 um 08:25 schrieb Jarkko Sakkinen:
Quoted 50 lines · James Bottomley
Quoted 49 lines · Jarkko Sakkinen
Quoted 24 lines · Jarkko Sakkinen
Quoted 23 lines · Jarkko Sakkinen
Quoted 20 lines · James Bottomley
Quoted 8 lines · Jarkko Sakkinen
Quoted 2 lines
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
Quoted 6 lines
https://patchwork.kernel.org/patch/10208965/
If you put it in your tree, I can just rebase on top of everything.
James
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
Quoted 8 lines
Quoted 3 lines
Tested-by Jarkko Sakkinen <[email protected]>/Jarkko
These must be taken away:
[ 2.843641] tpm tpm0: TPM: running incremental selftest [ 2.854087] tpm tpm0: TPM: selftest succeededI'm not wedded to having the messages, but it helps give context when something like this happens:
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2) [ 1.550108] tpm tpm0: TPM: running incremental selftest [ 1.602294] tpm tpm0: A TPM error (323) occurred incremental selftest [ 1.602320] tpm tpm0: TPM: incremental selftest failed [ 1.602322] tpm tpm0: TPM: running full selftest [ 2.523689] tpm tpm0: TPM: selftest succeededIt also helps explain why I lost a second in the boot sequence to the TPM having to run a full self test.
Without the chatty messages, what you see is
Quoted 8 lines
Quoted 5 lines
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2)[
1.602294] tpm tpm0: A TPM error (323) occurred incremental selftestWhich is a bit harder to interpret.
Way too much bloat to klog. Telling whether the full or incremental test failed makes sense. Otherwise, not so much.
As a user, I agree with James here. Having more elaborate information would have helped me in the past. Two more lines won't hurt in my opinion either.
[...]
Kind regards,
Paul
Quoted 58 lines · Paul Menzel
Dera Jarkko,
Am 21.02.2018 um 08:25 schrieb Jarkko Sakkinen:
Quoted 54 lines · James Bottomley
Quoted 53 lines · Jarkko Sakkinen
Quoted 24 lines · Jarkko Sakkinen
Quoted 23 lines · Jarkko Sakkinen
Quoted 20 lines · James Bottomley
Quoted 8 lines · Jarkko Sakkinen
Quoted 2 lines
I get merge conflicts in my tree but I'll review this.
You told me to rebase it on that patch that wasn't in your tree:
Quoted 6 lines
https://patchwork.kernel.org/patch/10208965/
If you put it in your tree, I can just rebase on top of everything.
James
Aah. Sorry, my bad I'll move forward on testing :-)
/Jarkko
Quoted 8 lines
Quoted 3 lines
Tested-by Jarkko Sakkinen <[email protected]>/Jarkko
These must be taken away:
[ 2.843641] tpm tpm0: TPM: running incremental selftest [ 2.854087] tpm tpm0: TPM: selftest succeededI'm not wedded to having the messages, but it helps give context when something like this happens:
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2) [ 1.550108] tpm tpm0: TPM: running incremental selftest [ 1.602294] tpm tpm0: A TPM error (323) occurred incremental selftest [ 1.602320] tpm tpm0: TPM: incremental selftest failed [ 1.602322] tpm tpm0: TPM: running full selftest [ 2.523689] tpm tpm0: TPM: selftest succeededIt also helps explain why I lost a second in the boot sequence to the TPM having to run a full self test.
Without the chatty messages, what you see is
[ 1.550099] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 2)[
1.602294] tpm tpm0: A TPM error (323) occurred incremental selftest
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Which is a bit harder to interpret.
Way too much bloat to klog. Telling whether the full or incremental test failed makes sense. Otherwise, not so much.
As a user, I agree with James here. Having more elaborate information would have helped me in the past. Two more lines won't hurt in my opinion either.
Reporting about success conditions is usually not a great idea. It is extra noise to the already crowded log. And we do not want three klog messages telling that the self test failed. It is just ridiculous. And we do not need a log message telling that self tests have been started. You can interfere that if you want by using ftrace.
I've never liked tpm_transmit_cmd() desc parameter, though. I think that should be eventually ripped off. The problem with that parameter is that it hard to generalize any senseful log message that would be a good fit for basically anything. I've only used it because it was there when I took over this subsystem.
What I would suggest here is this:
1. Pass NULL tpm_transmit_cmd().
2. Print one a good fit error message in tpm_do_self_test() instead.
/Jarkko
Dear James,
Am 19.02.2018 um 13:24 schrieb James Bottomley:
Quoted 29 lines
Ever since
commit
2482b1bba5122b1d5516c909832bdd282015b8e9Author: Alexander Steffen <[email protected]> Date: Thu Aug 31 19:18:56 2017 +0200tpm: Trigger only missing TPM 2.0 self tests
My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work (necessitating a reboot). The problem seems to be that the TPM gets into a state where the partial self-test doesn't return
TPM_RC_SUCCESS(meaning all tests have run to completion), but instead returnsTPM_RC_TESTING(meaning some tests are still running in the background). There are various theories that resending the self-test command actually causes the tests to restart and thus triggers moreTPM_RC_TESTINGreturns until the timeout is exceeded.There are several issues here: firstly being we shouldn't slow down the boot sequence waiting for the self test to complete once the TPM backgrounds them. It will actually make available all functions that have passed and if it gets a failure return
TPM_RC_FAILUREto every subsequent command. So the fix is to kick off self tests once and if they returnTPM_RC_TESTINGlog that as a backgrounded self test and continue on. In order to prevent other tpm users from seeing anyTPM_RC_TESTINGreturns (which it might if they send a command that needs a TPM subsystem which is still under test), we loop intpm_transmit_cmduntil either a timeout or we don't get aTPM_RC_TESTINGreturn.
Quoted 7 lines
Finally, there have been observations of strange returns from a partial test. One Nuvoton is occasionally returning
TPM_RC_COMMAND_CODE, so treat any unexpected return from a partial self test as an indication we need to run a full self test.Signed-off-by James Bottomley <[email protected]>Fixes 2482b1bba5122b1d5516c909832bdd282015b8e9
Thank you for fixing the regression. Could you tag this for stable too, or does this subsystem handle this differently?
Kind regards,
Paul