tests/sw_sync: use igt_fork_helper
RFC PATCH 1/6 tests/sw_sync: use igt_fork_helper
From: Daniel Vetter <[email protected]>
I'll need to wrap a bit of magic around all the fork() calls in our tests. Simplest way to get there is to roll out the existing helpers, which even saves a bit of boilerplate code.
--- tests/sw_sync.c | 54 ++++++++++++++++++------------------------------------ 1 file changed, 18 insertions(+), 36 deletions(-)
tests/sw_sync.c +18 -36
@@ -175,6 +175,7 @@ static void test_sync_busy_fork_unixsocket(void)int timeline;int skip =0 ;int sv[2 ]; +struct igt_helper_process proc; timeline =sw_sync_timeline_create ();
@@ -185,9 +186,7 @@ static void test_sync_busy_fork_unixsocket(void) goto out; } -switch (fork ()) { -case 0 : - { + igt_fork_helper(&proc) {/* Child process */ int socket = sv[1 ];int socket_timeline;
@@ -213,17 +212,8 @@ static void test_sync_busy_fork_unixsocket(void)/* Advance timeline from 0 -> 1 */ sw_sync_timeline_inc (socket_timeline,1 ); - -_Exit (0 ); -break ; - } -case -1 : - { -/* Failed fork */ - skip =1 ; -break ; } -default : + {/* Parent process */ int socket = sv[0 ];
@@ -252,15 +242,14 @@ static void test_sync_busy_fork_unixsocket(void)if (sendmsg (socket, &msg,0 ) <0 ) { skip =1 ; - goto out; + }else { +igt_assert_f (sync_fence_wait (fence,2 *1000 ) ==0 , +"Fence not signaled (timeline value 1 fence seqno 1)\n" ); } - -igt_assert_f (sync_fence_wait (fence,2 *1000 ) ==0 , -"Fence not signaled (timeline value 1 fence seqno 1)\n" ); -break ; - } } +igt_stop_helper (&proc); + out:close (fence);close (timeline);
@@ -272,32 +261,25 @@ static void test_sync_busy_fork(void)int fence;int timeline;int skip =0 ; +struct igt_helper_process proc; timeline =sw_sync_timeline_create (); fence =sw_sync_timeline_create_fence (timeline,1 ); -switch (fork ()) { -case 0 : -/* Child process */ + igt_fork_helper(&proc) {usleep (1 *1000 *1000 );/* Advance timeline from 0 -> 1 */ sw_sync_timeline_inc (timeline,1 ); -_Exit (0 ); -break ; -case -1 : -/* Failed fork */ - skip =1 ; -break ; -default : -/* Parent process */ -igt_assert_f (sync_fence_wait (fence,0 ) == -ETIME , -"Fence signaled (it should not have been signalled yet)\n" ); - -igt_assert_f (sync_fence_wait (fence,2 *1000 ) ==0 , -"Fence not signaled (timeline value 1 fence seqno 1)\n" ); -break ; } +igt_assert_f (sync_fence_wait (fence,0 ) == -ETIME , +"Fence signaled (it should not have been signalled yet)\n" ); + +igt_assert_f (sync_fence_wait (fence,2 *1000 ) ==0 , +"Fence not signaled (timeline value 1 fence seqno 1)\n" ); + +igt_stop_helper (&proc); +close (fence);close (timeline);igt_require (!skip);
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
RFC PATCH 2/6 lib/core: make logging pthread vs. fork safe
From: Daniel Vetter <[email protected]>
fork() is a pretty thing in a multithreaded program, it's essentially as bad as handling signals: When we fork the memory snapshot we can interrupts all other threads at any place, including while they're holding mutexes and other fun stuff.
libc itself has some internal fork handlers to clear caches and make sure locks stay in a safe place (we've had plenty of fun with e.g. the pid/tid caches when a signal happens too fast).
I want to put dmesg capture into igt, into a separate thread (so that dmesg capture nicely interleaves what the test is doing, +/- races), and stuff all the dmesg output into the igt logger. Which means we need to make sure that the log_buffer_mutex is in a predictable state.
Since we have 2 calls to fork() extract a little helper for this.
v2: Stop using fflush(NULL) - somehow this manages to hit a bug in libc when using a FILE in a separate thread (for capturing dmesg). Instead explicitly flush stderr and stdout only.
--- lib/igt_core.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
lib/igt_core.c +17 -8
@@ -1518,6 +1518,21 @@ static void fork_helper_exit_handler(int sig)assert (helper_process_count ==0 ); } +static pid_t __igt_fork_wrapper (void ) +{ +pid_t ret; + +/* ensure any buffers are flushed before fork */ +fflush (stdout); +fflush (stderr); + +pthread_mutex_lock (&log_buffer_mutex); + ret =fork (); +pthread_mutex_unlock (&log_buffer_mutex); + +return ret; +} +bool __igt_fork_helper (struct igt_helper_process *proc) {pid_t pid;
@@ -1540,10 +1555,7 @@ bool __igt_fork_helper(struct igt_helper_process *proc) tmp_count = exit_handler_count; exit_handler_count =0 ; -/* ensure any buffers are flushed before fork */ -fflush (NULL ); - -switch (pid =fork ()) { +switch (pid =__igt_fork_wrapper ()) {case -1 : exit_handler_count = tmp_count;igt_assert (0 );
@@ -1642,10 +1654,7 @@ bool __igt_fork(void)igt_assert (test_children); } -/* ensure any buffers are flushed before fork */ -fflush (NULL ); - -switch (test_children[num_test_children++] =fork ()) { +switch (test_children[num_test_children++] =__igt_fork_wrapper ()) {case -1 :igt_assert (0 );case 0 :
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
RFC PATCH 3/6 lib/core: Don't hide non-debug message when filtering for a debug log domain
In reply to Petri LatvalaFrom: Daniel Vetter <[email protected]>
I think this is the more sensible semantics, since this allows you to still follow what's going on with the test at a high level, while filtering for a specific (or multiple specific) debug log domains.
For non-debug messages log-domains technically exist, but we're not making much use of them really.
--- lib/igt_core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
lib/igt_core.c +5 -5
@@ -291,7 +291,7 @@ enum {static int igt_exitcode =IGT_EXIT_SUCCESS ;static const char *command_str; -static char * igt_log_domain_filter; +static char * igt_debug_log_domain_filter; static struct { char *entries[256]; uint8_t start, end;
@@ -757,7 +757,7 @@ static int common_init(int *argc, char **argv,case OPT_DEBUG : igt_log_level =IGT_LOG_DEBUG ;if (optarg &&strlen (optarg) >0 ) - igt_log_domain_filter =strdup (optarg); + igt_debug_log_domain_filter =strdup (optarg);break ;case OPT_LIST_SUBTESTS :if (!run_single_subtest)
@@ -2104,12 +2104,12 @@ void igt_vlog(const char *domain, enum igt_log_level level, const char *format, goto out;/* check domain filter */ -if (igt_log_domain_filter) { +if (level ==IGT_LOG_DEBUG && igt_debug_log_domain_filter) {/* if null domain and filter is not "application", return */ -if (!domain &&strcmp (igt_log_domain_filter,"application" )) +if (!domain &&strcmp (igt_debug_log_domain_filter,"application" )) goto out;/* else if domain and filter do not match, return */ -else if (domain &&strcmp (igt_log_domain_filter, domain)) +else if (domain &&strcmp (igt_debug_log_domain_filter, domain)) goto out; }
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
RFC PATCH 5/6 lib/core: report subtests that hit an igt_warning as WARNING
In reply to Petri LatvalaFrom: Daniel Vetter <[email protected]>
This is another piece of prep work to push the detection of dmesg warnings into igt itself, so that we can correctly report dmesg issue on a per-subtest basis even when running the entire binary.
--- lib/igt_core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
lib/igt_core.c +6 -1
@@ -1067,6 +1067,7 @@ void __igt_subtest_group_restore(int save)static bool skipped_one = false;static bool succeeded_one = false;static bool failed_one = false; +static bool warned = false;static void exit_subtest (const char *) __attribute__((noreturn));static void exit_subtest (const char *result)
@@ -1083,6 +1084,7 @@ static void exit_subtest(const char *result)igt_terminate_spin_batches (); in_subtest =NULL ; + warned = false;siglongjmp (igt_subtest_jmpbuf,1 ); }
@@ -1172,7 +1174,7 @@ void igt_success(void) { succeeded_one = true;if (in_subtest) -exit_subtest ("SUCCESS" ); +exit_subtest (warned ?"WARNING" :"SUCCESS" ); }/**
@@ -2166,6 +2168,9 @@ void igt_vlog(const char *domain, enum igt_log_level level, const char *format,if (list_subtests && level <=IGT_LOG_WARN )return ; +if (level >=IGT_LOG_WARN ) + warned = true; +if (vasprintf (&line, format, args) ==-1 )return ;
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
RFC PATCH 6/6 lib/core: Use whitelist with kmsg filter
In reply to Petri Latvaladmesg messages of level >=warn don't result in an IGT_LOG_WARN if they match a whitelist regexp now.
The whitelist is not configureable without rebuilding, and it's not even possible to use a different whitelist for different drivers; launching the kmsg monitor happens way before opening the driver (if any).
--- lib/igt_core.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
lib/igt_core.c +20 -1
@@ -55,6 +55,7 @@#include <limits.h> #include <locale.h> #include <uwildmat/uwildmat.h> +#include <regex.h> #ifdef HAVE_GLIB #include <glib.h> #endif
@@ -581,6 +582,16 @@ static void oom_adjust_for_doom(void) } +const char IGT_DMESG_WHITELIST [] = +"IRQ [0-9]+: no longer affine to CPU[0-9]+" +"|IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" +"|Setting dangerous option [a-z_]+ - tainting kernel" +"|Suspending console\\(s\\) \\(use no_console_suspend to debug\\)" +"|cache: parent cpu[0-9]+ should not be sleeping" +"|hpet[0-9]+: lost [0-9]+ rtc interrupts" +"|usb usb[0-9]+: root hub lost power or was reset" + ; +static void *kmsg_capture (void *arg) {/*
@@ -593,6 +604,13 @@ static void *kmsg_capture(void *arg)char *line =NULL ;size_t line_len =0 ;ssize_t read; +regex_t re; + +if (regcomp (&re,IGT_DMESG_WHITELIST ,REG_EXTENDED |REG_NOSUB ) !=0 ) { +igt_warn ("Cannot compile dmesg whitelist regexp\n" ); +fclose (kmsg_file); +return NULL ; + }while ((read =getline (&line, &line_len, kmsg_file))) {int s;
@@ -613,7 +631,8 @@ static void *kmsg_capture(void *arg) &seq, &ts_usec, &continuation);if (s ==4 ) { -if ((flags &0x7 ) <=4 ) +if ((flags &0x7 ) <=4 && +regexec (&re, line, (size_t )0 ,NULL ,0 )) level =IGT_LOG_WARN ;else level =IGT_LOG_DEBUG ;
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [RFC PATCH i-g-t 6/6] lib/core: Use whitelist with kmsg filter
Quoting Petri Latvala (2018-02-21 15:19:35)
Quoted 26 lines
dmesg messages of level >=warn don't result in an
IGT_LOG_WARNif they match a whitelist regexp now.The whitelist is not configureable without rebuilding, and it's not even possible to use a different whitelist for different drivers; launching the kmsg monitor happens way before opening the driver (if any).
Signed-off-by Petri Latvala <[email protected]>--- lib/igt_core.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)lib/igt_core.c +1
-0@@ -55,6 +55,7 @@#include <limits.h> #include <locale.h> #include <uwildmat/uwildmat.h> +#include <regex.h> #ifdef HAVE_GLIB #include <glib.h> #endif
lib/igt_core.c static void oom_adjust_for_doom(void) · line 585
Quoted 4 lines
lib/igt_core.c +1
-0@@ -581,6 +582,16 @@ static void oom_adjust_for_doom(void) } +const char IGT_DMESG_WHITELIST[] =
static. No need to shout.
lib/igt_core.c static void oom_adjust_for_doom(void) · line 586
Quoted 1 line
lib/igt_core.c +1
-0+"IRQ [0-9]+: no longer affine to CPU[0-9]+"
#define _ "|"
"IRQ [0-9]+: no longer affine to CPU[0-9]+" _ "IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" _ "Setting dangerous option [a-z_]+ - tainting kernel" _ ...
#undef _
?
Quoted 26 lines
lib/igt_core.c +15
-0+"|IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" +"|Setting dangerous option [a-z_]+ - tainting kernel" +"|Suspending console\\(s\\) \\(use no_console_suspend to debug\\)" +"|cache: parent cpu[0-9]+ should not be sleeping" +"|hpet[0-9]+: lost [0-9]+ rtc interrupts" +"|usb usb[0-9]+: root hub lost power or was reset" + ; +static void *kmsg_capture (void *arg) {/* @@ -593,6 +604,13 @@ static void *kmsg_capture(void *arg)char *line =NULL ;size_t line_len =0 ;ssize_t read; +regex_t re; + +if (regcomp (&re,IGT_DMESG_WHITELIST ,REG_EXTENDED |REG_NOSUB ) !=0 ) { +igt_warn ("Cannot compile dmesg whitelist regexp\n" ); +fclose (kmsg_file); +return NULL ; + }while ((read =getline (&line, &line_len, kmsg_file))) {int s;
lib/igt_core.c static void *kmsg_capture(void *arg) · line 635
Quoted 6 lines
lib/igt_core.c +2
-1@@ -613,7 +631,8 @@ static void *kmsg_capture(void *arg) &seq, &ts_usec, &continuation);if (s ==4 ) { -if ((flags &0x7 ) <=4 ) +if ((flags &0x7 ) <=4 && +regexec (&re, line, (size_t )0 ,NULL ,0 ))
regexec() == REG_NOMATCH to be clearer?
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [RFC PATCH i-g-t 6/6] lib/core: Use whitelist with kmsg filter
In reply to Petri LatvalaQuoting Petri Latvala (2018-02-21 15:19:35)
Quoted 28 lines
dmesg messages of level >=warn don't result in an
IGT_LOG_WARNif they match a whitelist regexp now.The whitelist is not configureable without rebuilding, and it's not even possible to use a different whitelist for different drivers; launching the kmsg monitor happens way before opening the driver (if any).
Signed-off-by Petri Latvala <[email protected]>--- lib/igt_core.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)lib/igt_core.c +1
-0@@ -55,6 +55,7 @@#include <limits.h> #include <locale.h> #include <uwildmat/uwildmat.h> +#include <regex.h> #ifdef HAVE_GLIB #include <glib.h> #endif @@ -581,6 +582,16 @@ static void oom_adjust_for_doom(void) }
lib/igt_core.c static void oom_adjust_for_doom(void) · line 593
Quoted 10 lines
lib/igt_core.c +9
-0+const char IGT_DMESG_WHITELIST [] = +"IRQ [0-9]+: no longer affine to CPU[0-9]+" +"|IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" +"|Setting dangerous option [a-z_]+ - tainting kernel" +"|Suspending console\\(s\\) \\(use no_console_suspend to debug\\)" +"|cache: parent cpu[0-9]+ should not be sleeping" +"|hpet[0-9]+: lost [0-9]+ rtc interrupts" +"|usb usb[0-9]+: root hub lost power or was reset" + ;
Can we load this from a suppressions.txt? That will make it easier to maintain. One line per suppression, with the "|" implied? Or just load the entire regexp and compile it exactly as written by the user. Ok, that makes it more powerful and useful.
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v3 1/1 lib/core: Use whitelist with kmsg filter
In reply to Petri Latvaladmesg messages of level >=warn don't result in an IGT_LOG_WARN if they match a whitelist regexp now.
The whitelist is not configureable without rebuilding, and it's not even possible to use a different whitelist for different drivers; launching the kmsg monitor happens way before opening the driver (if any).
v2: Use static and a less yelling variable name for the whitelist,
compare to REG_NOMATCH directly, construct the regexp in a nicer looking way (Chris). Be more verbose when monitoring stops.
v3: More patterns, document them.
--- lib/igt_core.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-)
lib/igt_core.c +46 -2
@@ -55,6 +55,7 @@#include <limits.h> #include <locale.h> #include <uwildmat/uwildmat.h> +#include <regex.h> #ifdef HAVE_GLIB #include <glib.h> #endif
@@ -572,6 +573,37 @@ static void oom_adjust_for_doom(void) } +/* +* This regexp controls the kmsg monitor handling. All kernel log +* records that have log level of warning or higher get inserted into +* IGT log buffer with an IGT_LOG_WARN unless they match this +* regexp. Otherwise they get inserted at IGT_LOG_DEBUG. +*/ + +#define _ "|" +static const char igt_dmesg_whitelist[] = +"ACPI: button: The lid device is not compliant to SW_LID" _ +"ACPI: .*: Unable to dock!" _ +"IRQ [0-9]+: no longer affine to CPU[0-9]+" _ +"IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" _ +/* i915 tests set module options, expected message */ +"Setting dangerous option [a-z_]+ - tainting kernel" _ +/* Raw printk() call, uses default log level (warn) */ +"Suspending console\\(s\\) \\(use no_console_suspend to debug\\)" _ +"atkbd serio[0-9]+: Failed to (deactivate|enable) keyboard on isa[0-9]+/serio[0-9]+" _ +"cache: parent cpu[0-9]+ should not be sleeping" _ +"hpet[0-9]+: lost [0-9]+ rtc interrupts" _ +/* i915 selftests terminate normally with ENODEV from the +* module load after the testing finishes, which produces this +* message. +*/ +"i915: probe of [0-9:.]+ failed with error -25" _ +/* swiotbl warns even when asked not to */ +"mock: DMA: Out of SW-IOMMU space for [0-9]+ bytes" _ +"usb usb[0-9]+: root hub lost power or was reset" + ; +#undef _ +static void *kmsg_capture (void *arg) {/*
@@ -584,6 +616,13 @@ static void *kmsg_capture(void *arg)char *line =NULL ;size_t line_len =0 ;ssize_t read; +regex_t re; + +if (regcomp (&re, igt_dmesg_whitelist,REG_EXTENDED |REG_NOSUB ) !=0 ) { +igt_warn ("Cannot compile dmesg whitelist regexp\n" ); +fclose (kmsg_file); +return NULL ; + }while ((read =getline (&line, &line_len, kmsg_file))) {int s;
@@ -604,7 +643,8 @@ static void *kmsg_capture(void *arg) &seq, &ts_usec, &continuation);if (s ==4 ) { -if ((flags &0x7 ) <=4 ) +if ((flags &0x7 ) <=4 && +regexec (&re, line, (size_t )0 ,NULL ,0 ) ==REG_NOMATCH ) level =IGT_LOG_WARN ;else level =IGT_LOG_DEBUG ;
@@ -629,7 +669,11 @@ static void *kmsg_capture(void *arg) } } -igt_warn ("ran out of dmesg, this shouldn't happen\n" ); +igt_warn ("Ran out of dmesg, this shouldn't happen. Reason: " ); +if (errno) +igt_warn ("%s\n" ,strerror (errno)); +else +igt_warn ("EOF\n" );free (line);fclose (kmsg_file);
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v3 1/1] lib/core: Use whitelist with kmsg filter
Quoting Petri Latvala (2018-03-01 11:15:21)
Quoted 37 lines
dmesg messages of level >=warn don't result in an
IGT_LOG_WARNif they match a whitelist regexp now.The whitelist is not configureable without rebuilding, and it's not even possible to use a different whitelist for different drivers; launching the kmsg monitor happens way before opening the driver (if any).
v2: Use static and a less yelling variable name for the whitelist,
compare toREG_NOMATCHdirectly, construct the regexp in a nicer looking way (Chris). Be more verbose when monitoring stops.
v3: More patterns, document them.Signed-off-by Petri Latvala <[email protected]>--- lib/igt_core.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-)lib/igt_core.c +4
-0@@ -55,6 +55,7 @@#include <limits.h> #include <locale.h> #include <uwildmat/uwildmat.h> +#include <regex.h> #ifdef HAVE_GLIB #include <glib.h> #endif @@ -572,6 +573,37 @@ static void oom_adjust_for_doom(void) } +/* +* This regexp controls the kmsg monitor handling. All kernel log +* records that have log level of warning or higher get inserted into
lib/igt_core.c static void oom_adjust_for_doom(void) · line 588
Quoted 10 lines
lib/igt_core.c +10
-0+* IGT log buffer with an IGT_LOG_WARN unless they match this +* regexp. Otherwise they get inserted at IGT_LOG_DEBUG. +*/ + +#define _ "|" +static const char igt_dmesg_whitelist[] = +"ACPI: button: The lid device is not compliant to SW_LID" _ +"ACPI: .*: Unable to dock!" _ +"IRQ [0-9]+: no longer affine to CPU[0-9]+" _ +"IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" _
And throw in newlines to visually break up the comment groups.
Quoted 50 lines
lib/igt_core.c +27
-1+/* i915 tests set module options, expected message */ +"Setting dangerous option [a-z_]+ - tainting kernel" _ +/* Raw printk() call, uses default log level (warn) */ +"Suspending console\\(s\\) \\(use no_console_suspend to debug\\)" _ +"atkbd serio[0-9]+: Failed to (deactivate|enable) keyboard on isa[0-9]+/serio[0-9]+" _ +"cache: parent cpu[0-9]+ should not be sleeping" _ +"hpet[0-9]+: lost [0-9]+ rtc interrupts" _ +/* i915 selftests terminate normally with ENODEV from the +* module load after the testing finishes, which produces this +* message. +*/ +"i915: probe of [0-9:.]+ failed with error -25" _ +/* swiotbl warns even when asked not to */ +"mock: DMA: Out of SW-IOMMU space for [0-9]+ bytes" _ +"usb usb[0-9]+: root hub lost power or was reset" + ; +#undef _ +static void *kmsg_capture (void *arg) {/* @@ -584,6 +616,13 @@ static void *kmsg_capture(void *arg)char *line =NULL ;size_t line_len =0 ;ssize_t read; +regex_t re; + +if (regcomp (&re, igt_dmesg_whitelist,REG_EXTENDED |REG_NOSUB ) !=0 ) { +igt_warn ("Cannot compile dmesg whitelist regexp\n" ); +fclose (kmsg_file); +return NULL ; + }while ((read =getline (&line, &line_len, kmsg_file))) {int s;@@ -604,7 +643,8 @@ static void *kmsg_capture(void *arg) &seq, &ts_usec, &continuation);if (s ==4 ) { -if ((flags &0x7 ) <=4 ) +if ((flags &0x7 ) <=4 && +regexec (&re, line, (size_t )0 ,NULL ,0 ) ==REG_NOMATCH ) level =IGT_LOG_WARN ;else level =IGT_LOG_DEBUG ;
lib/igt_core.c static void *kmsg_capture(void *arg) · line 673
Quoted 6 lines
lib/igt_core.c +2
-1@@ -629,7 +669,11 @@ static void *kmsg_capture(void *arg) } } -igt_warn ("ran out of dmesg, this shouldn't happen\n" ); +igt_warn ("Ran out of dmesg, this shouldn't happen. Reason: " ); +if (errno)
errno is only valid immediately after an error (after a success, the value is undefined, often garbage). You just called a few library functions and overwrote errno.
igt_warn("...Reason: %s\n", errno ? strerror(errno) : "EOF");
(Although I didn't double check nothing untoward happened to upset errno before hand, but it looks like we should only get here after getline() fails.)
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v3 1/1] lib/core: Use whitelist with kmsg filter
Quoted 35 lines · Chris Wilson
Quoting Petri Latvala (2018-03-01 11:15:21)
Quoted 34 lines
dmesg messages of level >=warn don't result in an
IGT_LOG_WARNif they match a whitelist regexp now.The whitelist is not configureable without rebuilding, and it's not even possible to use a different whitelist for different drivers; launching the kmsg monitor happens way before opening the driver (if any).
v2: Use static and a less yelling variable name for the whitelist,
compare toREG_NOMATCHdirectly, construct the regexp in a nicer looking way (Chris). Be more verbose when monitoring stops.
v3: More patterns, document them.Signed-off-by Petri Latvala <[email protected]>--- lib/igt_core.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-)lib/igt_core.c +1
-0@@ -55,6 +55,7 @@#include <limits.h> #include <locale.h> #include <uwildmat/uwildmat.h> +#include <regex.h> #ifdef HAVE_GLIB #include <glib.h> #endif @@ -572,6 +573,37 @@ static void oom_adjust_for_doom(void) }
Quoted 15 lines
lib/igt_core.c static void oom_adjust_for_doom(void) · line 588
Quoted 13 lines
lib/igt_core.c +13
-0+/* +* This regexp controls the kmsg monitor handling. All kernel log +* records that have log level of warning or higher get inserted into +* IGT log buffer with an IGT_LOG_WARN unless they match this +* regexp. Otherwise they get inserted at IGT_LOG_DEBUG. +*/ + +#define _ "|" +static const char igt_dmesg_whitelist[] = +"ACPI: button: The lid device is not compliant to SW_LID" _ +"ACPI: .*: Unable to dock!" _ +"IRQ [0-9]+: no longer affine to CPU[0-9]+" _ +"IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" _And throw in newlines to visually break up the comment groups.
Yeah. Also, TODO: Comment all lines.
Quoted 61 lines
Quoted 50 lines
lib/igt_core.c +27
-1+/* i915 tests set module options, expected message */ +"Setting dangerous option [a-z_]+ - tainting kernel" _ +/* Raw printk() call, uses default log level (warn) */ +"Suspending console\\(s\\) \\(use no_console_suspend to debug\\)" _ +"atkbd serio[0-9]+: Failed to (deactivate|enable) keyboard on isa[0-9]+/serio[0-9]+" _ +"cache: parent cpu[0-9]+ should not be sleeping" _ +"hpet[0-9]+: lost [0-9]+ rtc interrupts" _ +/* i915 selftests terminate normally with ENODEV from the +* module load after the testing finishes, which produces this +* message. +*/ +"i915: probe of [0-9:.]+ failed with error -25" _ +/* swiotbl warns even when asked not to */ +"mock: DMA: Out of SW-IOMMU space for [0-9]+ bytes" _ +"usb usb[0-9]+: root hub lost power or was reset" + ; +#undef _ +static void *kmsg_capture (void *arg) {/* @@ -584,6 +616,13 @@ static void *kmsg_capture(void *arg)char *line =NULL ;size_t line_len =0 ;ssize_t read; +regex_t re; + +if (regcomp (&re, igt_dmesg_whitelist,REG_EXTENDED |REG_NOSUB ) !=0 ) { +igt_warn ("Cannot compile dmesg whitelist regexp\n" ); +fclose (kmsg_file); +return NULL ; + }while ((read =getline (&line, &line_len, kmsg_file))) {int s;@@ -604,7 +643,8 @@ static void *kmsg_capture(void *arg) &seq, &ts_usec, &continuation);if (s ==4 ) { -if ((flags &0x7 ) <=4 ) +if ((flags &0x7 ) <=4 && +regexec (&re, line, (size_t )0 ,NULL ,0 ) ==REG_NOMATCH ) level =IGT_LOG_WARN ;else level =IGT_LOG_DEBUG ;lib/igt_core.c static void *kmsg_capture(void *arg) · line 673
Quoted 6 lines
lib/igt_core.c +2
-1@@ -629,7 +669,11 @@ static void *kmsg_capture(void *arg) } } -igt_warn ("ran out of dmesg, this shouldn't happen\n" ); +igt_warn ("Ran out of dmesg, this shouldn't happen. Reason: " ); +if (errno)errno is only valid immediately after an error (after a success, the value is undefined, often garbage). You just called a few library functions and overwrote errno.
Quoted 5 lines
igt_warn("...Reason: %s\n", errno ? strerror(errno) : "EOF");(Although I didn't double check nothing untoward happened to upset errno before hand, but it looks like we should only get here after
getline()fails.)
Yeah this part still needs some cleanup. I just wanted some data for now to see why we ran out of dmesg. "this shouldn't happen" happens way too often when you test...
I also did notice your suggestion for suppressions.txt and agree with it. This series needs some serious polishing first, so I'll make that happen later when everything else works.
Signature · 5 lines
Petri Latvala _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v3 1/1] lib/core: Use whitelist with kmsg filter
In reply to Petri LatvalaQuoted 54 lines · Petri Latvala
dmesg messages of level >=warn don't result in an
IGT_LOG_WARNif they match a whitelist regexp now.The whitelist is not configureable without rebuilding, and it's not even possible to use a different whitelist for different drivers; launching the kmsg monitor happens way before opening the driver (if any).
v2: Use static and a less yelling variable name for the whitelist,
compare toREG_NOMATCHdirectly, construct the regexp in a nicer looking way (Chris). Be more verbose when monitoring stops.
v3: More patterns, document them.Signed-off-by Petri Latvala <[email protected]>--- lib/igt_core.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-)lib/igt_core.c +21
-0@@ -55,6 +55,7 @@#include <limits.h> #include <locale.h> #include <uwildmat/uwildmat.h> +#include <regex.h> #ifdef HAVE_GLIB #include <glib.h> #endif @@ -572,6 +573,37 @@ static void oom_adjust_for_doom(void) } +/* +* This regexp controls the kmsg monitor handling. All kernel log +* records that have log level of warning or higher get inserted into +* IGT log buffer with an IGT_LOG_WARN unless they match this +* regexp. Otherwise they get inserted at IGT_LOG_DEBUG. +*/ + +#define _ "|" +static const char igt_dmesg_whitelist[] = +"ACPI: button: The lid device is not compliant to SW_LID" _ +"ACPI: .*: Unable to dock!" _ +"IRQ [0-9]+: no longer affine to CPU[0-9]+" _ +"IRQ fixup: irq [0-9]+ move in progress, old vector [0-9]+" _ +/* i915 tests set module options, expected message */ +"Setting dangerous option [a-z_]+ - tainting kernel" _ +/* Raw printk() call, uses default log level (warn) */ +"Suspending console\\(s\\) \\(use no_console_suspend to debug\\)" _ +"atkbd serio[0-9]+: Failed to (deactivate|enable) keyboard on isa[0-9]+/serio[0-9]+" _ +"cache: parent cpu[0-9]+ should not be sleeping" _ +"hpet[0-9]+: lost [0-9]+ rtc interrupts" _
lib/igt_core.c static void oom_adjust_for_doom(void) · line 605
Quoted 10 lines
lib/igt_core.c +10
-0+/* i915 selftests terminate normally with ENODEV from the +* module load after the testing finishes, which produces this +* message. +*/ +"i915: probe of [0-9:.]+ failed with error -25" _ +/* swiotbl warns even when asked not to */ +"mock: DMA: Out of SW-IOMMU space for [0-9]+ bytes" _ +"usb usb[0-9]+: root hub lost power or was reset" + ; +#undef _
I wonder whether we should maintain this long-term in igt, or as fixup patches in drm-intel/topic/core-for-CI (with the eventual goal to push them out to maintainers, in the next century or so ...).
My initial dmesg filter hack in piglit was just that, a quick hack, and I get the feeling it's starting to outlive it's usefulness. -Daniel
Quoted 48 lines
lib/igt_core.c +15
-2+static void *kmsg_capture (void *arg) {/* @@ -584,6 +616,13 @@ static void *kmsg_capture(void *arg)char *line =NULL ;size_t line_len =0 ;ssize_t read; +regex_t re; + +if (regcomp (&re, igt_dmesg_whitelist,REG_EXTENDED |REG_NOSUB ) !=0 ) { +igt_warn ("Cannot compile dmesg whitelist regexp\n" ); +fclose (kmsg_file); +return NULL ; + }while ((read =getline (&line, &line_len, kmsg_file))) {int s;@@ -604,7 +643,8 @@ static void *kmsg_capture(void *arg) &seq, &ts_usec, &continuation);if (s ==4 ) { -if ((flags &0x7 ) <=4 ) +if ((flags &0x7 ) <=4 && +regexec (&re, line, (size_t )0 ,NULL ,0 ) ==REG_NOMATCH ) level =IGT_LOG_WARN ;else level =IGT_LOG_DEBUG ;@@ -629,7 +669,11 @@ static void *kmsg_capture(void *arg) } } -igt_warn ("ran out of dmesg, this shouldn't happen\n" ); +igt_warn ("Ran out of dmesg, this shouldn't happen. Reason: " ); +if (errno) +igt_warn ("%s\n" ,strerror (errno)); +else +igt_warn ("EOF\n" );free (line);fclose (kmsg_file);Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
RFC PATCH v5 4/6 igt/core: Initial simple interleaved kmsg filtering
In reply to Petri LatvalaFrom: Daniel Vetter <[email protected]>
Needs to be beefed up so that dmesg warning (and worse) are re-emmitted as IGT_LOG_WARN. But only if they match one of our filters (which we should probably allow to be extended, e.g. depending upon which driver has been openened). This also requires that we at least parse the basic of kmsg lines (adjusting the timestamp to match our own would be real cool).
v2:
- Seek to the end of the kmsg buffer before starting the capturing.
- Increase linebuffer to avoid dmesg drowning out all the tests messages.
v3: Unlazy slightly and implement semi-correct kmsg parsing.
v4 (Petri): Handle continuation lines instead of crashing on them
v5 (Petri): Handle EPIPE, handle fragment continuations, point to
format docs
--- lib/igt_core.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 86 insertions(+), 1 deletion(-)
lib/igt_core.c +86 -1
@@ -293,7 +293,7 @@ static const char *command_str;static char * igt_debug_log_domain_filter;static struct { -char *entries[256 ]; +char *entries[2000 ];uint8_t start, end; } log_buffer;static pthread_mutex_t log_buffer_mutex =PTHREAD_MUTEX_INITIALIZER ;
@@ -581,6 +581,89 @@ static void oom_adjust_for_doom(void) } +static void *kmsg_capture (void *arg) +{ +/* +* See Documentation/ABI/testing/dev-kmsg in the kernel +* sources for documentation on the message format. +*/ + +int kmsg_capture_fd = (uintptr_t ) arg; +FILE *kmsg_file =fdopen (kmsg_capture_fd,"r" ); +char *line =NULL ; +size_t line_len =0 ; +ssize_t read; + +while ((read =getline (&line, &line_len, kmsg_file))) { +int s; +unsigned flags; +unsigned long long seq, ts_usec; +char continuation; +enum igt_log_level level; + +if (read <0 ) { +if (errno ==EPIPE ) +/* We can get EPIPE on buffer overflow */ +continue ; +else +break ; + } + + s =sscanf (line,"%u,%llu,%llu,%c;" , &flags, + &seq, &ts_usec, &continuation); + +if (s ==4 ) { +if ((flags &0x7 ) <=4 ) + level =IGT_LOG_WARN ; +else + level =IGT_LOG_DEBUG ; + +if (continuation =='c' ) +/* +* KERN_CONT fragment, log level in +* this log record is the default log +* level instead of the one the +* fragment continues. +*/ + level =IGT_LOG_DEBUG ; + +igt_log ("dmesg" , level,"[%llu.%06llu], %s" , + ts_usec /1000000 , + ts_usec %1000000 , +index (line,';' ) +1 ); + }else if (line[0 ] ==' ' ) { +/* Machine readable key/value pairs, ignore */ + }else { +igt_warn ("Cannot parse kmsg line: %s\n" , line); + } + } + +igt_warn ("ran out of dmesg, this shouldn't happen\n" ); + +free (line); +fclose (kmsg_file); +return NULL ; +} + +static void start_kmsg_recording (void ) +{ +static pthread_t kmsg_capture_thread; +int kmsg_capture_fd; + + kmsg_capture_fd =open ("/dev/kmsg" , +O_RDONLY |O_CLOEXEC ); + +if (kmsg_capture_fd <0 ) { +igt_info ("no dmesg capturing\n" ); +return ; + } + +lseek (kmsg_capture_fd,0 ,SEEK_END ); + +pthread_create (&kmsg_capture_thread,NULL , + kmsg_capture, (void *)(uintptr_t ) kmsg_capture_fd); +} +#ifdef HAVE_GLIB static void common_init_config (void ) {
@@ -814,6 +897,8 @@ out:kmsg (KERN_INFO "[IGT] %s: executing\n" , command_str);print_version (); +start_kmsg_recording (); +sync ();oom_adjust_for_doom ();ftrace_dump_on_oops (true);
Signature · 6 lines
2.14.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoting Petri Latvala (2018-02-21 15:19:30)
Quoted 8 lines
From: Daniel Vetter <[email protected]>
I'll need to wrap a bit of magic around all the
fork()calls in our tests. Simplest way to get there is to roll out the existing helpers, which even saves a bit of boilerplate code.Cc Robert Foss <[email protected]>Signed-off-by Daniel Vetter <[email protected]>
While this patch is a simple mechanical translation, we don't need to be using a fork helper here as a timer will do the do. Future improvement.
-Chris
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BAT: warning for series starting with [RFC,i-g-t,1/6] tests/sw_sync: use igt_fork_helper
In reply to Petri Latvala== Series Details ==
== Series Details ==
Series: series starting with [RFC,i-g-t,1/6] tests/sw_sync: use igt_fork_helper
URL : https://patchwork.freedesktop.org/series/38708/
State : warning
== Summary ==
IGT patchset tested on top of latest successful build 960e55a87d7b7d7385063e37cc9f281df2be8037 igt/gem_ctx_isolation: Check isolation of registers between contexts
with latest DRM-Tip kernel build CI_DRM_3817562a3886d1cd drm-tip: 2018y-02m-21d-18h-35m-44s UTC integration manifest
No testlist changes.
Test debugfs_test:
Subgroup read_all_entries:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test gem_exec_fence:
Subgroup basic-busy-default:
pass -> WARN (fi-blb-e6850)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-dsi)
Subgroup basic-wait-default:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-skl-6770hq)
Subgroup basic-await-default:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-glk-1)
Subgroup await-hang-default:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-j4205)
Subgroup nb-await-default:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-glk-1)
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> WARN (fi-snb-2520m)
pass -> WARN (fi-snb-2600) fdo#103880
pass -> WARN (fi-ivb-3520m)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-skl-6260u) fdo#104108 +14
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-bxt-j4205) fdo#105009
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-cfl-s2)
Subgroup basic-s4-devices:
pass -> WARN (fi-snb-2600)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-6770hq)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-kbl-7500u)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-cfl-s2) fdo#105071
Test gem_ringfill:
Subgroup basic-default:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
Subgroup basic-default-interruptible:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-cfl-s2)
Subgroup basic-default-forked:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-elk-e7500)
pass -> WARN (fi-snb-2520m)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
Subgroup basic-default-fd:
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-snb-2520m)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
Subgroup basic-default-hang:
dmesg-warn -> DMESG-FAIL (fi-blb-e6850) fdo#101600 +1
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-bxt-j4205)
Test kms_busy:
Subgroup basic-flip-a:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-b:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-c:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test kms_chamelium:
Subgroup hdmi-hpd-fast:
pass -> WARN (fi-skl-6700k2)
Subgroup hdmi-edid-read:
pass -> WARN (fi-skl-6700k2)
Subgroup hdmi-crc-fast:
pass -> WARN (fi-skl-6700k2)
Subgroup common-hpd-after-suspend:
pass -> WARN (fi-skl-6700k2)
dmesg-warn -> DMESG-FAIL (fi-kbl-7500u) fdo#102505
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-atomic:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-busy-flip-before-cursor-legacy:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-after-cursor-atomic:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-after-cursor-legacy:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-after-cursor-varying-size:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-before-cursor-atomic:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-before-cursor-legacy:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-before-cursor-varying-size:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test kms_flip:
Subgroup basic-flip-vs-dpms:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-kbl-7567u)
Subgroup basic-flip-vs-modeset:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-vs-wf_vblank:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-plain-flip:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test kms_pipe_crc_basic:
Subgroup bad-nb-words-1:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup bad-nb-words-3:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup bad-pipe:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup bad-source:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup hang-read-crc-pipe-a:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup hang-read-crc-pipe-b:
pass -> WARN (fi-skl-6700k2) fdo#103191 +17
Subgroup nonblocking-crc-pipe-a:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-a-frame-sequence:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-b:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-c:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-c-frame-sequence:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup read-crc-pipe-a:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup read-crc-pipe-c-frame-sequence:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup suspend-read-crc-pipe-a:
pass -> WARN (fi-bwr-2160)
pass -> WARN (fi-ivb-3520m)
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-skl-6260u)
pass -> WARN (fi-skl-6600u)
pass -> WARN (fi-skl-6700hq) fdo#101144
pass -> WARN (fi-skl-6770hq)
pass -> WARN (fi-skl-gvtdvm)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-cfl-s2)
Subgroup suspend-read-crc-pipe-b:
pass -> WARN (fi-bwr-2160)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-ivb-3520m)
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-cfl-s2)
Subgroup suspend-read-crc-pipe-c:
pass -> WARN (fi-ivb-3520m)
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bxt-dsi) fdo#103927
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-cfl-s2)
Test pm_rpm:
Subgroup basic-pci-d3-state:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-rte:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test drv_module_reload:
Subgroup basic-reload:
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-glk-1)
Subgroup basic-no-display:
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-hsw-4770)
pass -> WARN (fi-bdw-5557u)
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-glk-1)
Subgroup basic-reload-inject:
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-hsw-4770)
pass -> WARN (fi-bdw-5557u)
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-glk-1)fdo#103880 https://bugs.freedesktop.org/show_bug.cgi?id=103880
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#105009 https://bugs.freedesktop.org/show_bug.cgi?id=105009
fdo#105071 https://bugs.freedesktop.org/show_bug.cgi?id=105071
fdo#101600 https://bugs.freedesktop.org/show_bug.cgi?id=101600
fdo#102505 https://bugs.freedesktop.org/show_bug.cgi?id=102505
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
fdo#101144 https://bugs.freedesktop.org/show_bug.cgi?id=101144
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fi-bdw-5557u total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:21 time:421s fi-bdw-gvtdvm total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:24 time:430s fi-blb-e6850 total:288 pass:222 dwarn:0 dfail:1 fail:0 skip:64 time:374s fi-bsw-n3050 total:288 pass:231 dwarn:0 dfail:0 fail:0 skip:46 time:498s fi-bwr-2160 total:288 pass:181 dwarn:0 dfail:0 fail:0 skip:105 time:286s fi-bxt-dsi total:288 pass:252 dwarn:0 dfail:0 fail:0 skip:30 time:481s fi-bxt-j4205 total:288 pass:252 dwarn:0 dfail:0 fail:0 skip:29 time:481s fi-byt-j1900 total:288 pass:243 dwarn:0 dfail:0 fail:0 skip:35 time:471s fi-byt-n2820 total:288 pass:238 dwarn:0 dfail:0 fail:0 skip:39 time:459s fi-cfl-s2 total:288 pass:256 dwarn:0 dfail:0 fail:0 skip:26 time:568s fi-elk-e7500 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:59 time:415s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:288s fi-glk-1 total:288 pass:250 dwarn:0 dfail:0 fail:0 skip:28 time:510s fi-hsw-4770 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:27 time:390s fi-ilk-650 total:288 pass:222 dwarn:0 dfail:0 fail:0 skip:60 time:414s fi-ivb-3520m total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:29 time:464s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:410s fi-kbl-7500u total:288 pass:262 dwarn:0 dfail:1 fail:0 skip:24 time:453s fi-kbl-7560u total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:19 time:493s fi-kbl-7567u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:20 time:450s fi-kbl-r total:288 pass:256 dwarn:0 dfail:0 fail:0 skip:27 time:493s fi-pnv-d510 total:288 pass:213 dwarn:0 dfail:1 fail:0 skip:65 time:588s fi-skl-6260u total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:20 time:426s fi-skl-6600u total:288 pass:257 dwarn:0 dfail:0 fail:0 skip:27 time:504s fi-skl-6700hq total:288 pass:257 dwarn:0 dfail:0 fail:0 skip:26 time:522s fi-skl-6700k2 total:288 pass:214 dwarn:0 dfail:0 fail:0 skip:24 time:487s fi-skl-6770hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:20 time:467s fi-skl-guc total:288 pass:215 dwarn:0 dfail:0 fail:0 skip:28 time:407s fi-skl-gvtdvm total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:23 time:430s fi-snb-2520m total:288 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:524s fi-snb-2600 total:288 pass:246 dwarn:0 dfail:0 fail:0 skip:40 time:403s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_977/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.IGT: failure for series starting with [RFC,i-g-t,1/6] tests/sw_sync: use igt_fork_helper
In reply to Petri Latvala== Series Details ==
== Series Details ==
Series: series starting with [RFC,i-g-t,1/6] tests/sw_sync: use igt_fork_helper
URL : https://patchwork.freedesktop.org/series/38708/
State : failure
== Summary ==
Test kms_plane:
Subgroup plane-panning-bottom-right-suspend-pipe-a-planes:
pass -> WARN (shard-snb) fdo#102365
pass -> WARN (shard-apl) fdo#103166
Subgroup plane-panning-bottom-right-suspend-pipe-c-planes:
pass -> WARN (shard-apl) fdo#104164 +2
Subgroup plane-panning-bottom-right-suspend-pipe-b-planes:
pass -> WARN (shard-hsw) fdo#103540
Test drv_suspend:
Subgroup debugfs-reader:
pass -> WARN (shard-apl)
Subgroup sysfs-reader:
pass -> WARN (shard-apl)
Subgroup forcewake:
pass -> WARN (shard-apl)
Subgroup fence-restore-tiled2untiled:
pass -> WARN (shard-apl)
Subgroup fence-restore-untiled:
skip -> PASS (shard-snb)
pass -> WARN (shard-apl)
Test kms_busy:
Subgroup extended-pageflip-hang-newfb-render-c:
pass -> WARN (shard-apl)
Subgroup extended-modeset-hang-newfb-render-a:
pass -> WARN (shard-apl)
Test kms_flip:
Subgroup plain-flip-ts-check:
pass -> FAIL (shard-hsw) fdo#100368 +1
Subgroup 2x-nonexisting-fb:
pass -> WARN (shard-hsw)
Subgroup basic-flip-vs-wf_vblank:
fail -> PASS (shard-hsw) fdo#103928
Subgroup nonexisting-fb:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup nonexisting-fb-interruptible:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup bo-too-big:
pass -> WARN (shard-apl)
Subgroup 2x-nonexisting-fb-interruptible:
pass -> WARN (shard-hsw)
Test kms_cursor_legacy:
Subgroup pipe-a-torture-move:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup all-pipes-torture-move:
pass -> WARN (shard-snb)
pass -> WARN (shard-apl)
Subgroup pipe-c-torture-bo:
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup all-pipes-torture-bo:
pass -> WARN (shard-snb)
Subgroup pipe-c-torture-move:
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup pipe-a-torture-bo:
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup pipe-b-torture-move:
pass -> WARN (shard-snb)
pass -> WARN (shard-apl)
Subgroup pipe-b-torture-bo:
pass -> WARN (shard-snb)
pass -> WARN (shard-apl)
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
pass -> WARN (shard-apl) fdo#103375 +10
Test gem_exec_schedule:
Subgroup preempt-hang-vebox:
pass -> WARN (shard-apl)
Subgroup reorder-wide-vebox:
pass -> WARN (shard-apl)
Test gem_workarounds:
Subgroup suspend-resume-fd:
pass -> WARN (shard-apl)
Test prime_vgem:
Subgroup sync-bsd:
pass -> WARN (shard-apl)
Test perf_pmu:
Subgroup cpu-hotplug:
incomplete -> PASS (shard-apl)
Test pm_rpm:
Subgroup system-suspend-modeset:
pass -> WARN (shard-apl)
Test prime_mmap_coherency:
Subgroup ioctl-errors:
pass -> WARN (shard-apl)
Test perf:
Subgroup oa-exponents:
incomplete -> PASS (shard-apl) fdo#102254
Test kms_cursor_crc:
Subgroup cursor-64x64-suspend:
pass -> WARN (shard-apl)
Test gem_tiled_blits:
Subgroup normal:
pass -> SKIP (shard-apl)
Test kms_frontbuffer_tracking:
Subgroup fbc-suspend:
pass -> WARN (shard-apl) fdo#101623
Test drv_selftest:
Subgroup mock_fence:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup mock_vma:
pass -> WARN (shard-snb)
pass -> WARN (shard-apl)
Subgroup live_sanitycheck:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_uncore:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_requests:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_objects:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_dmabuf:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_coherency:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_gtt:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl) fdo#103927 +2
Subgroup live_evict:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_hugepages:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
Subgroup live_contexts:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_hangcheck:
pass -> WARN (shard-snb) fdo#103880
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Subgroup live_guc:
pass -> WARN (shard-snb)
pass -> WARN (shard-hsw)
pass -> WARN (shard-apl)
Test kms_rotation_crc:
Subgroup sprite-rotation-180:
fail -> PASS (shard-snb) fdo#103925
Test drv_module_reload:
Subgroup basic-reload-inject:
pass -> WARN (shard-hsw)
Subgroup basic-no-display:
pass -> WARN (shard-hsw)
Test kms_vblank:
Subgroup pipe-a-ts-continuation-dpms-suspend:
pass -> WARN (shard-apl)
Subgroup pipe-a-ts-continuation-suspend:
pass -> WARN (shard-apl)
Subgroup pipe-c-ts-continuation-dpms-suspend:
pass -> WARN (shard-apl)
Subgroup pipe-b-query-forked:
pass -> WARN (shard-apl)
Subgroup pipe-a-wait-busy:
pass -> WARN (shard-apl)
Subgroup pipe-b-ts-continuation-dpms-suspend:
pass -> WARN (shard-apl)
Subgroup pipe-b-ts-continuation-suspend:
pass -> WARN (shard-apl)
Test gem_mmap_gtt:
Subgroup forked-big-copy:
pass -> WARN (shard-apl)
Subgroup basic-small-bo-tiledx:
pass -> WARN (shard-apl)
Test gem_set_tiling_vs_blt:
Subgroup untiled-to-tiled:
pass -> WARN (shard-apl)
Test kms_setmode:
Subgroup basic:
pass -> FAIL (shard-hsw) fdo#99912
Test gem_fence_thrash:
Subgroup bo-write-verify-threaded-none:
pass -> WARN (shard-apl)
Test gem_sync:
Subgroup basic-all:
pass -> WARN (shard-apl)
Test kms_sysfs_edid_timing:
pass -> WARN (shard-apl) fdo#100047
Test sw_sync:
Subgroup sync_busy_fork_unixsocket:
pass -> FAIL (shard-snb)
pass -> FAIL (shard-hsw)
pass -> FAIL (shard-apl)
Test gem_exec_fence:
Subgroup basic-busy-default:
pass -> WARN (shard-apl)
Test gem_exec_gttfill:
Subgroup basic:
pass -> WARN (shard-apl)
Test kms_fbcon_fbt:
Subgroup fbc-suspend:
pass -> WARN (shard-apl)
Test kms_plane_multiple:
Subgroup atomic-pipe-a-tiling-none:
pass -> WARN (shard-apl)fdo#102365 https://bugs.freedesktop.org/show_bug.cgi?id=102365
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#104164 https://bugs.freedesktop.org/show_bug.cgi?id=104164
fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103928 https://bugs.freedesktop.org/show_bug.cgi?id=103928
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#103880 https://bugs.freedesktop.org/show_bug.cgi?id=103880
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
shard-apl total:3465 pass:1739 dwarn:1 dfail:0 fail:13 skip:1631 time:12229s shard-hsw total:3465 pass:1741 dwarn:1 dfail:0 fail:4 skip:1693 time:11824s shard-snb total:3465 pass:1335 dwarn:1 dfail:0 fail:3 skip:2104 time:6746s
Blacklisted hosts:
shard-kbl total:3465 pass:1898 dwarn:1 dfail:0 fail:15 skip:1489 time:9665s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_977/shards.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BAT: warning for series starting with [RFC,i-g-t,1/6] tests/sw_sync: use igt_fork_helper
In reply to Petri Latvala== Series Details ==
== Series Details ==
Series: series starting with [RFC,i-g-t,1/6] tests/sw_sync: use igt_fork_helper
URL : https://patchwork.freedesktop.org/series/38708/
State : warning
== Summary ==
IGT patchset tested on top of latest successful build a5d7e165fe5558487799ad75b9627f49947337af tools/intel_dp_compliance: Add missing GLIB_CFLAGS
with latest DRM-Tip kernel build CI_DRM_38607fe823aaeff7 drm-tip: 2018y-03m-01d-15h-58m-23s UTC integration manifest
No testlist changes.
---- Possible new issues:
Test debugfs_test:
Subgroup read_all_entries:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test drv_module_reload:
Subgroup basic-no-display:
pass -> WARN (fi-bdw-5557u)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-hsw-4770)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-reload:
pass -> WARN (fi-glk-1)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-reload-inject:
pass -> WARN (fi-bdw-5557u)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-hsw-4770)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test gem_exec_fence:
Subgroup await-hang-default:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-pnv-d510)
Subgroup basic-await-default:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-skl-gvtdvm)
Subgroup basic-busy-default:
pass -> WARN (fi-blb-e6850)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-snb-2520m)
Subgroup basic-wait-default:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-skl-gvtdvm)
Subgroup nb-await-default:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-pnv-d510)
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-cfl-s2)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-ivb-3520m)
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-skl-6700hq)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-snb-2520m)
Subgroup basic-s4-devices:
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-6770hq)
pass -> WARN (fi-skl-guc)
pass -> WARN (fi-snb-2600)
Test gem_ringfill:
Subgroup basic-default:
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-skl-gvtdvm)
Subgroup basic-default-fd:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-snb-2520m)
Subgroup basic-default-forked:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-cfl-8700k)
pass -> WARN (fi-elk-e7500)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-ivb-3520m)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-skl-6700k2)
Subgroup basic-default-hang:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
Subgroup basic-default-interruptible:
pass -> WARN (fi-bsw-n3050)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-byt-j1900)
pass -> WARN (fi-byt-n2820)
pass -> WARN (fi-ilk-650)
pass -> WARN (fi-pnv-d510)
pass -> WARN (fi-snb-2520m)
Test kms_busy:
Subgroup basic-flip-a:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-b:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-c:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test kms_chamelium:
Subgroup common-hpd-after-suspend:
pass -> WARN (fi-skl-6700k2)
Subgroup hdmi-crc-fast:
pass -> WARN (fi-skl-6700k2)
Subgroup hdmi-edid-read:
pass -> WARN (fi-skl-6700k2)
Subgroup hdmi-hpd-fast:
pass -> WARN (fi-skl-6700k2)
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-atomic:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-busy-flip-before-cursor-legacy:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-after-cursor-atomic:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-after-cursor-legacy:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-after-cursor-varying-size:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-before-cursor-atomic:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-before-cursor-legacy:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-before-cursor-varying-size:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test kms_flip:
Subgroup basic-flip-vs-dpms:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-vs-modeset:
pass -> WARN (fi-kbl-7567u)
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-flip-vs-wf_vblank:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-plain-flip:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Test kms_pipe_crc_basic:
Subgroup bad-nb-words-1:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup bad-nb-words-3:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup bad-pipe:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup bad-source:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup hang-read-crc-pipe-a:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-a:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-a-frame-sequence:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-b:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup nonblocking-crc-pipe-c-frame-sequence:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup read-crc-pipe-c-frame-sequence:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup suspend-read-crc-pipe-a:
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bwr-2160)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-cfl-s2)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
pass -> WARN (fi-skl-6260u)
pass -> WARN (fi-skl-6600u)
pass -> WARN (fi-skl-6770hq)
pass -> WARN (fi-skl-gvtdvm)
Subgroup suspend-read-crc-pipe-b:
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bwr-2160)
pass -> WARN (fi-bxt-dsi)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-cfl-s2)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
Subgroup suspend-read-crc-pipe-c:
pass -> WARN (fi-bdw-gvtdvm)
pass -> WARN (fi-bxt-j4205)
pass -> WARN (fi-cfl-s2)
pass -> WARN (fi-glk-1)
pass -> WARN (fi-kbl-7560u)
pass -> WARN (fi-kbl-r)
Test pm_rpm:
Subgroup basic-pci-d3-state:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)
Subgroup basic-rte:
pass -> WARN (fi-skl-6700k2)
pass -> WARN (fi-skl-guc)---- Known issues:
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> WARN (fi-bxt-j4205) fdo#105009
pass -> WARN (fi-skl-6260u) fdo#104108 +14
pass -> WARN (fi-snb-2600) fdo#103880
Subgroup basic-s4-devices:
pass -> WARN (fi-cfl-s2) fdo#105071
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test gem_ringfill:
Subgroup basic-default-hang:
dmesg-warn -> DMESG-FAIL (fi-blb-e6850) fdo#101600 +1
Test kms_chamelium:
Subgroup common-hpd-after-suspend:
dmesg-warn -> DMESG-FAIL (fi-kbl-7500u) fdo#105310
Test kms_flip:
Subgroup basic-flip-vs-wf_vblank:
pass -> WARN (fi-cfl-s2) fdo#100368
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-b:
pass -> WARN (fi-skl-6700k2) fdo#103191 +21
Subgroup suspend-read-crc-pipe-a:
pass -> WARN (fi-ivb-3520m) k.org#198519 +2
pass -> WARN (fi-skl-6700hq) fdo#101144
Subgroup suspend-read-crc-pipe-b:
pass -> WARN (fi-bdw-5557u) fdo#104162
Subgroup suspend-read-crc-pipe-c:
pass -> WARN (fi-bxt-dsi) fdo#103927
Test prime_vgem:
Subgroup basic-fence-flip:
pass -> FAIL (fi-ilk-650) fdo#104008 +1fdo#105009 https://bugs.freedesktop.org/show_bug.cgi?id=105009
fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
fdo#103880 https://bugs.freedesktop.org/show_bug.cgi?id=103880
fdo#105071 https://bugs.freedesktop.org/show_bug.cgi?id=105071
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#101600 https://bugs.freedesktop.org/show_bug.cgi?id=101600
fdo#105310 https://bugs.freedesktop.org/show_bug.cgi?id=105310
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
k.org#198519 https://bugzilla.kernel.org/show_bug.cgi?id=198519
fdo#101144 https://bugs.freedesktop.org/show_bug.cgi?id=101144
fdo#104162 https://bugs.freedesktop.org/show_bug.cgi?id=104162
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fi-bdw-5557u total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:21 time:416s fi-bdw-gvtdvm total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:24 time:424s fi-blb-e6850 total:288 pass:222 dwarn:0 dfail:1 fail:0 skip:64 time:374s fi-bsw-n3050 total:288 pass:231 dwarn:0 dfail:0 fail:0 skip:46 time:497s fi-bwr-2160 total:288 pass:181 dwarn:0 dfail:0 fail:0 skip:105 time:283s fi-bxt-dsi total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:30 time:479s fi-bxt-j4205 total:288 pass:251 dwarn:0 dfail:0 fail:0 skip:29 time:486s fi-byt-j1900 total:288 pass:243 dwarn:0 dfail:0 fail:0 skip:35 time:471s fi-byt-n2820 total:288 pass:238 dwarn:0 dfail:0 fail:0 skip:39 time:461s fi-cfl-8700k total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:28 time:392s fi-cfl-s2 total:288 pass:256 dwarn:0 dfail:0 fail:0 skip:26 time:564s fi-elk-e7500 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:59 time:415s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:292s fi-glk-1 total:288 pass:252 dwarn:0 dfail:0 fail:0 skip:28 time:512s fi-hsw-4770 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:27 time:389s fi-ilk-650 total:288 pass:221 dwarn:0 dfail:0 fail:1 skip:60 time:411s fi-ivb-3520m total:288 pass:254 dwarn:0 dfail:0 fail:0 skip:29 time:444s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:410s fi-kbl-7500u total:288 pass:263 dwarn:0 dfail:1 fail:0 skip:24 time:452s fi-kbl-7560u total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:19 time:494s fi-kbl-7567u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:20 time:451s fi-kbl-r total:288 pass:256 dwarn:0 dfail:0 fail:0 skip:27 time:495s fi-pnv-d510 total:288 pass:213 dwarn:0 dfail:1 fail:0 skip:65 time:586s fi-skl-6260u total:288 pass:263 dwarn:0 dfail:0 fail:1 skip:20 time:431s fi-skl-6600u total:288 pass:257 dwarn:0 dfail:0 fail:0 skip:27 time:498s fi-skl-6700hq total:288 pass:257 dwarn:0 dfail:0 fail:0 skip:26 time:521s fi-skl-6700k2 total:288 pass:214 dwarn:0 dfail:0 fail:0 skip:24 time:488s fi-skl-6770hq total:288 pass:263 dwarn:0 dfail:0 fail:0 skip:20 time:474s fi-skl-guc total:288 pass:215 dwarn:0 dfail:0 fail:0 skip:28 time:409s fi-skl-gvtdvm total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:23 time:433s fi-snb-2520m total:288 pass:244 dwarn:0 dfail:0 fail:0 skip:40 time:526s fi-snb-2600 total:288 pass:246 dwarn:0 dfail:0 fail:0 skip:40 time:402s
Blacklisted hosts:
fi-cfl-u total:288 pass:257 dwarn:0 dfail:0 fail:0 skip:26 time:505s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1039/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev