drm/i915: GuC test run
Subsystems (2)
Tvrtko Ursulin
maintainerFrom: Tvrtko Ursulin <[email protected]>
With disabled aggressive idling from IGT. To see how shard run fares.
--- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +2 -2
@@ -4076,8 +4076,8 @@ i915_drop_caches_set(void *data, u64 val)i915_gem_shrink_all (dev_priv);fs_reclaim_release (GFP_KERNEL ); -if (val &DROP_IDLE ) -drain_delayed_work (&dev_priv->gt.idle_work); +// if (val & DROP_IDLE) +// drain_delayed_work(&dev_priv->gt.idle_work); if (val &DROP_FREED )i915_gem_drain_freed_objects (dev_priv);
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, 1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for drm/i915: GuC test run
== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run
URL : https://patchwork.freedesktop.org/series/38615/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip a6558de0fe3a drm/i915: GuC test run -:20: WARNING: please, no space before tabs #20: FILE: drivers/gpu/drm/i915/i915_debugfs.c:4079: +// ^Iif (val & DROP_IDLE)$
-:21: WARNING: please, no space before tabs #21: FILE: drivers/gpu/drm/i915/i915_debugfs.c:4080:
+// ^I^Idrain_delayed_work(&dev_priv->gt.idle_work);$
total: 0 errors, 2 warnings, 0 checks, 18 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: GuC test run
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run
URL : https://patchwork.freedesktop.org/series/38615/
State : failure
== Summary ==
Series 38615v1 drm/i915: GuC test run
https://patchwork.freedesktop.org/api/1.0/series/38615/revisions/1/mbox/
Test core_auth:
Subgroup basic-auth:
pass -> SKIP (fi-gdg-551)
pass -> SKIP (fi-blb-e6850)
pass -> SKIP (fi-pnv-d510)
pass -> SKIP (fi-bwr-2160)
pass -> SKIP (fi-elk-e7500)
pass -> SKIP (fi-ilk-650)
pass -> SKIP (fi-snb-2520m)
pass -> SKIP (fi-snb-2600)
pass -> SKIP (fi-ivb-3520m)
pass -> SKIP (fi-ivb-3770)
pass -> SKIP (fi-byt-j1900)
pass -> SKIP (fi-byt-n2820)
pass -> SKIP (fi-hsw-4770)
pass -> SKIP (fi-bdw-5557u)
pass -> SKIP (fi-bdw-gvtdvm)
pass -> SKIP (fi-bsw-n3050)
pass -> SKIP (fi-skl-gvtdvm)
pass -> SKIP (fi-glk-1)
Test core_prop_blob:
Subgroup basic:
pass -> SKIP (fi-gdg-551)
pass -> SKIP (fi-blb-e6850)
pass -> SKIP (fi-pnv-d510)
pass -> SKIP (fi-bwr-2160)
pass -> SKIP (fi-elk-e7500)
pass -> SKIP (fi-ilk-650)
pass -> SKIP (fi-snb-2520m)
pass -> SKIP (fi-snb-2600)
pass -> SKIP (fi-ivb-3520m)
pass -> SKIP (fi-ivb-3770)
pass -> SKIP (fi-byt-j1900)
pass -> SKIP (fi-byt-n2820)
pass -> SKIP (fi-hsw-4770)
pass -> SKIP (fi-bdw-5557u)
pass -> SKIP (fi-bdw-gvtdvm)
pass -> SKIP (fi-bsw-n3050)
pass -> SKIP (fi-skl-gvtdvm)
pass -> SKIP (fi-glk-1)
Test debugfs_test:
Subgroup read_all_entries:
pass -> SKIP (fi-gdg-551)
pass -> SKIP (fi-blb-e6850)
pass -> SKIP (fi-pnv-d510)
pass -> SKIP (fi-bwr-2160)
pass -> SKIP (fi-elk-e7500) fdo#103989 +16
pass -> SKIP (fi-ilk-650)
pass -> SKIP (fi-snb-2520m) fdo#103713 +1
pass -> SKIP (fi-snb-2600)
pass -> SKIP (fi-ivb-3520m)
pass -> SKIP (fi-ivb-3770)
pass -> SKIP (fi-byt-j1900)
pass -> SKIP (fi-byt-n2820)
pass -> SKIP (fi-hsw-4770)
pass -> SKIP (fi-bdw-5557u)
pass -> SKIP (fi-bdw-gvtdvm)
pass -> SKIP (fi-bsw-n3050)
pass -> SKIP (fi-skl-gvtdvm)
pass -> SKIP (fi-glk-1)
Test drv_getparams_basic:
Subgroup basic-eu-total:
pass -> SKIP (fi-gdg-551)
pass -> SKIP (fi-blb-e6850)
pass -> SKIP (fi-pnv-d510)
pass -> SKIP (fi-bwr-2160)
pass -> SKIP (fi-elk-e7500)
pass -> SKIP (fi-ilk-650)
pass -> SKIP (fi-snb-2520m)
pass -> SKIP (fi-snb-2600)
pass -> SKIP (fi-ivb-3520m)
pass -> SKIP (fi-ivb-3770)
pass -> SKIP (fi-byt-j1900)
pass -> SKIP (fi-byt-n2820)
pass -> SKIP (fi-hsw-4770)
pass -> SKIP (fi-bdw-5557u)
pass -> SKIP (fi-bdw-gvtdvm)
pass -> SKIP (fi-bsw-n3050)
pass -> SKIP (fi-skl-gvtdvm)
pass -> SKIP (fi-glk-1)
Subgroup basic-subslice-total:
pass -> SKIP (fi-gdg-551)
pass -> SKIP (fi-blb-e6850)
pass -> SKIP (fi-pnv-d510)
pass -> SKIP (fi-bwr-2160)
pass -> SKIP (fi-elk-e7500)
pass -> SKIP (fi-ilk-650)
pass -> SKIP (fi-snb-2520m)
pass -> SKIP (fi-snb-2600)
pass -> SKIP (fi-ivb-3520m)
pass -> SKIP (fi-ivb-3770)
pass -> SKIP (fi-byt-j1900)
pass -> SKIP (fi-byt-n2820)
pass -> SKIP (fi-hsw-4770)
pass -> SKIP (fi-bdw-5557u)
pass -> SKIP (fi-bdw-gvtdvm)
pass -> SKIP (fi-bsw-n3050)WARNING: Long output truncated
6697b76215fde36745a73b95453febbdb8c63991 drm-tip: 2018y-02m-20d-16h-40m-48s UTC integration manifest a6558de0fe3a drm/i915: GuC test run
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8085/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v2 1/1 drm/i915: GuC test run
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
With disabled aggressive idling from IGT. To see how shard run fares.
--- drivers/gpu/drm/i915/i915_debugfs.c | 3 --- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 1 insertion(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +0 -3
@@ -4076,9 +4076,6 @@ i915_drop_caches_set(void *data, u64 val)i915_gem_shrink_all (dev_priv);fs_reclaim_release (GFP_KERNEL ); -if (val &DROP_IDLE ) -drain_delayed_work (&dev_priv->gt.idle_work); -if (val &DROP_FREED )i915_gem_drain_freed_objects (dev_priv);
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v3 1/1 drm/i915: GuC test run
From: Tvrtko Ursulin <[email protected]>
With disabled aggressive idling from IGT. To see how shard run fares.
--- drivers/gpu/drm/i915/i915_debugfs.c | 3 --- drivers/gpu/drm/i915/i915_params.h | 2 +- drivers/gpu/drm/i915/intel_uc.c | 2 ++ 3 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +0 -3
@@ -4076,9 +4076,6 @@ i915_drop_caches_set(void *data, u64 val)i915_gem_shrink_all (dev_priv);fs_reclaim_release (GFP_KERNEL ); -if (val &DROP_IDLE ) -drain_delayed_work (&dev_priv->gt.idle_work); -if (val &DROP_FREED )i915_gem_drain_freed_objects (dev_priv);
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \
drivers/gpu/drm/i915/intel_uc.c +2 -0
@@ -63,6 +63,8 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv) enable_guc |=ENABLE_GUC_LOAD_HUC ;/* Any platform specific fine-tuning can be done here */ +if (intel_gvt_active (dev_priv)) + enable_guc = false;return enable_guc; }
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi guys,
I was trying to do a test run with GuC enabled but I am possibly doing something wrong, or something is broken on SKL GVT machine. Could you please check:
Quoted 19 lines · Tvrtko Ursulin
drivers/gpu/drm/i915/i915_params.h +1
-1@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \drivers/gpu/drm/i915/intel_uc.c +0
-0
drivers/gpu/drm/i915/intel_uc.c static int __get_platform_enable_guc(struct drm_i915_private *dev_priv) · line 70
Quoted 8 lines
drivers/gpu/drm/i915/intel_uc.c +2
-0@@ -63,6 +63,8 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv) enable_guc |=ENABLE_GUC_LOAD_HUC ;/* Any platform specific fine-tuning can be done here */ +if (intel_gvt_active (dev_priv)) + enable_guc = false;return enable_guc; }
This patch results with:
<7>[ 10.742713] [drm:intel_uc_sanitize_options [i915]] enable_guc=3 (submission:yes huc:yes) <7>[ 10.742748] [drm:intel_uc_sanitize_options [i915]] guc_log_level=0 (enabled:no verbosity:-1)
and then:
<4>[ 10.792405] ------------[ cut here ]------------ <4>[ 10.792407] WARN_ON(!i915_memcpy_from_wc(((void *)0), ((void *)0), 0)) <4>[ 10.792458] WARNING: CPU: 0 PID: 236 at drivers/gpu/drm/i915/intel_guc_log.c:616 intel_guc_log_create+0x144/0x1c0 [i915] <4>[ 10.792460] Modules linked in: i915(+) crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000 prime_numbers i2c_piix4 <4>[ 10.792474] CPU: 0 PID: 236 Comm: systemd-udevd Not tainted 4.16.0-rc2-CI-Patchwork_8097+ #1 <4>[ 10.792476] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 <4>[ 10.792510] RIP: 0010:intel_guc_log_create+0x144/0x1c0 [i915] <4>[ 10.792512] RSP: 0018:ffffc9000023fae0 EFLAGS: 00010286 <4>[ 10.792515] RAX: 000000000000003a RBX: ffff8800759d0ed0 RCX: 0000000000000001 <4>[ 10.792516] RDX: 0000000080000001 RSI: ffffffff8210fb61 RDI: 00000000ffffffff <4>[ 10.792518] RBP: ffff8800759d0ed0 R08: ffff880079fd8940 R09: 00000000bf56e8ae <4>[ 10.792519] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800759d0070 <4>[ 10.792521] R13: ffff880076a4da18 R14: 0000000000000000 R15: ffff88007c93c548 <4>[ 10.792525] FS: 00007ff6ffc7f8c0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 <4>[ 10.792526] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 10.792528] CR2: 00007fdabb4ab000 CR3: 0000000079fc6003 CR4: 00000000003606f0 <4>[ 10.792529] Call Trace: <4>[ 10.792565] intel_guc_init+0x5d/0x100 [i915] <4>[ 10.792642] intel_uc_init+0x29/0xa0 [i915] <4>[ 10.792694] i915_gem_init+0x198/0x540 [i915] <4>[ 10.792727] ? intel_uc_fw_fetch+0x2db/0x650 [i915] <4>[ 10.792755] i915_driver_load+0xa56/0x1090 [i915] <4>[ 10.792760] ? trace_hardirqs_on_caller+0xde/0x1c0 <4>[ 10.792789] i915_pci_probe+0x2e/0x90 [i915] <4>[ 10.792793] pci_device_probe+0x9c/0x120 <4>[ 10.792798] driver_probe_device+0x2a4/0x480 <4>[ 10.792802] __driver_attach+0xd9/0xe0 <4>[ 10.792804] ? driver_probe_device+0x480/0x480 <4>[ 10.792807] ? driver_probe_device+0x480/0x480 <4>[ 10.792810] bus_for_each_dev+0x50/0x90 <4>[ 10.792814] bus_add_driver+0x168/0x260 <4>[ 10.792818] driver_register+0x52/0xc0 <4>[ 10.792820] ? 0xffffffffa0294000 <4>[ 10.792822] do_one_initcall+0x39/0x150 <4>[ 10.792826] ? rcu_read_lock_sched_held+0x6f/0x80 <4>[ 10.792828] ? kmem_cache_alloc_trace+0x245/0x2b0 <4>[ 10.792833] do_init_module+0x56/0x1ef <4>[ 10.792836] load_module+0x236b/0x2dc0 <4>[ 10.792840] ? show_coresize+0x20/0x20 <4>[ 10.792843] ? vfs_read+0x126/0x150 <4>[ 10.792851] ? SyS_finit_module+0xa5/0xe0 <4>[ 10.792853] SyS_finit_module+0xa5/0xe0 <4>[ 10.792862] do_syscall_64+0x65/0x1a0 <4>[ 10.792866] entry_SYSCALL_64_after_hwframe+0x42/0xb7 <4>[ 10.792868] RIP: 0033:0x7ff6feb0f499 <4>[ 10.792869] RSP: 002b:00007ffdf3058448 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4>[ 10.792872] RAX: ffffffffffffffda RBX: 00005652dfedde90 RCX: 00007ff6feb0f499 <4>[ 10.792874] RDX: 0000000000000000 RSI: 00007ff6ff005e23 RDI: 000000000000000f <4>[ 10.792875] RBP: 00007ff6ff005e23 R08: 0000000000000000 R09: 0000000000000000 <4>[ 10.792877] R10: 000000000000000f R11: 0000000000000246 R12: 0000000000000000 <4>[ 10.792878] R13: 00005652dff1c180 R14: 0000000000020000 R15: 000000000aba9500 <4>[ 10.792886] Code: e1 0f 0b 48 c7 c6 a0 df 19 a0 48 c7 c7 39 df 19 a0 e8 e6 aa 00 e1 0f 0b 48 c7 c6 18 c2 1b a0 48 c7 c7 f7 de 19 a0 e8 0c 9f f9 e0 <0f> 0b b8 ea ff ff ff c7 05 97 95 16 00 00 00 00 00 48 83 c4 08 <4>[ 10.792968] ---[ end trace aa9469e091d0e5f0 ]---
So is intel_gvt_active the wrong thing to use, or in fact, is i915.enable_guc=-1 supposed to handle GVT to start with?
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi Tvrtko,
Quoted 5 lines · Tvrtko Ursulin
Hi guys,
I was trying to do a test run with GuC enabled but I am possibly doing something wrong, or something is broken on SKL GVT machine. Could you please check:
This is known issue where movntdqa support is disabled for hypervisor.
GuC init/load is currently tied up with logging setup that depends on movntdqa.
Michal Winiarski will be sharing new changes for GuC log/relay support and then we can bypass this check for GuC load.
Can use this meanwhile https://patchwork.freedesktop.org/patch/205723/ for CI.
Quoted 95 lines · Tvrtko Ursulin
Quoted 19 lines
drivers/gpu/drm/i915/i915_params.h +1
-1@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \drivers/gpu/drm/i915/intel_uc.c +0
-0drivers/gpu/drm/i915/intel_uc.c static int __get_platform_enable_guc(struct drm_i915_private *dev_priv) · line 70
Quoted 8 lines
drivers/gpu/drm/i915/intel_uc.c +2
-0@@ -63,6 +63,8 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv) enable_guc |=ENABLE_GUC_LOAD_HUC ;/* Any platform specific fine-tuning can be done here */ +if (intel_gvt_active (dev_priv)) + enable_guc = false;return enable_guc; }This patch results with:
<7>[ 10.742713] [drm:intel_uc_sanitize_options [i915]] enable_guc=3 (submission:yes huc:yes) <7>[ 10.742748] [drm:intel_uc_sanitize_options [i915]] guc_log_level=0 (enabled:no verbosity:-1)and then:
<4>[ 10.792405] ------------[ cut here ]------------ <4>[ 10.792407] WARN_ON(!i915_memcpy_from_wc(((void *)0), ((void *)0), 0)) <4>[ 10.792458] WARNING: CPU: 0 PID: 236 at drivers/gpu/drm/i915/intel_guc_log.c:616 intel_guc_log_create+0x144/0x1c0 [i915] <4>[ 10.792460] Modules linked in: i915(+) crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000 prime_numbers i2c_piix4 <4>[ 10.792474] CPU: 0 PID: 236 Comm: systemd-udevd Not tainted 4.16.0-rc2-CI-Patchwork_8097+ #1 <4>[ 10.792476] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 <4>[ 10.792510] RIP: 0010:intel_guc_log_create+0x144/0x1c0 [i915] <4>[ 10.792512] RSP: 0018:ffffc9000023fae0 EFLAGS: 00010286 <4>[ 10.792515] RAX: 000000000000003a RBX: ffff8800759d0ed0 RCX: 0000000000000001 <4>[ 10.792516] RDX: 0000000080000001 RSI: ffffffff8210fb61 RDI: 00000000ffffffff <4>[ 10.792518] RBP: ffff8800759d0ed0 R08: ffff880079fd8940 R09: 00000000bf56e8ae <4>[ 10.792519] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800759d0070 <4>[ 10.792521] R13: ffff880076a4da18 R14: 0000000000000000 R15: ffff88007c93c548 <4>[ 10.792525] FS: 00007ff6ffc7f8c0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 <4>[ 10.792526] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 10.792528] CR2: 00007fdabb4ab000 CR3: 0000000079fc6003 CR4: 00000000003606f0 <4>[ 10.792529] Call Trace: <4>[ 10.792565] intel_guc_init+0x5d/0x100 [i915] <4>[ 10.792642] intel_uc_init+0x29/0xa0 [i915] <4>[ 10.792694] i915_gem_init+0x198/0x540 [i915] <4>[ 10.792727] ? intel_uc_fw_fetch+0x2db/0x650 [i915] <4>[ 10.792755] i915_driver_load+0xa56/0x1090 [i915] <4>[ 10.792760] ? trace_hardirqs_on_caller+0xde/0x1c0 <4>[ 10.792789] i915_pci_probe+0x2e/0x90 [i915] <4>[ 10.792793] pci_device_probe+0x9c/0x120 <4>[ 10.792798] driver_probe_device+0x2a4/0x480 <4>[ 10.792802] __driver_attach+0xd9/0xe0 <4>[ 10.792804] ? driver_probe_device+0x480/0x480 <4>[ 10.792807] ? driver_probe_device+0x480/0x480 <4>[ 10.792810] bus_for_each_dev+0x50/0x90 <4>[ 10.792814] bus_add_driver+0x168/0x260 <4>[ 10.792818] driver_register+0x52/0xc0 <4>[ 10.792820] ? 0xffffffffa0294000 <4>[ 10.792822] do_one_initcall+0x39/0x150 <4>[ 10.792826] ? rcu_read_lock_sched_held+0x6f/0x80 <4>[ 10.792828] ? kmem_cache_alloc_trace+0x245/0x2b0 <4>[ 10.792833] do_init_module+0x56/0x1ef <4>[ 10.792836] load_module+0x236b/0x2dc0 <4>[ 10.792840] ? show_coresize+0x20/0x20 <4>[ 10.792843] ? vfs_read+0x126/0x150 <4>[ 10.792851] ? SyS_finit_module+0xa5/0xe0 <4>[ 10.792853] SyS_finit_module+0xa5/0xe0 <4>[ 10.792862] do_syscall_64+0x65/0x1a0 <4>[ 10.792866] entry_SYSCALL_64_after_hwframe+0x42/0xb7 <4>[ 10.792868] RIP: 0033:0x7ff6feb0f499 <4>[ 10.792869] RSP: 002b:00007ffdf3058448 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4>[ 10.792872] RAX: ffffffffffffffda RBX: 00005652dfedde90 RCX: 00007ff6feb0f499 <4>[ 10.792874] RDX: 0000000000000000 RSI: 00007ff6ff005e23 RDI: 000000000000000f <4>[ 10.792875] RBP: 00007ff6ff005e23 R08: 0000000000000000 R09: 0000000000000000 <4>[ 10.792877] R10: 000000000000000f R11: 0000000000000246 R12: 0000000000000000 <4>[ 10.792878] R13: 00005652dff1c180 R14: 0000000000020000 R15: 000000000aba9500 <4>[ 10.792886] Code: e1 0f 0b 48 c7 c6 a0 df 19 a0 48 c7 c7 39 df 19 a0 e8 e6 aa 00 e1 0f 0b 48 c7 c6 18 c2 1b a0 48 c7 c7 f7 de 19 a0 e8 0c 9f f9 e0 <0f> 0b b8 ea ff ff ff c7 05 97 95 16 00 00 00 00 00 48 83 c4 08 <4>[ 10.792968] ---[ end trace aa9469e091d0e5f0 ]---So is
intel_gvt_activethe wrong thing to use, or in fact, is i915.enable_guc=-1 supposed to handle GVT to start with?Regards,
Tvrtko
Signature · 7 lines
Thanks, Sagar _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 6 lines · Sagar Arun Kamble
Hi Tvrtko,
Quoted 2 lines · Tvrtko Ursulin
Hi guys,
Quoted 8 lines
Quoted 3 lines
I was trying to do a test run with GuC enabled but I am possibly doing something wrong, or something is broken on SKL GVT machine. Could you please check:
This is known issue where movntdqa support is disabled for hypervisor.
GuC init/load is currently tied up with logging setup that depends on movntdqa.
Michal Winiarski will be sharing new changes for GuC log/relay support and then we can bypass this check for GuC load.Can use this meanwhile https://patchwork.freedesktop.org/patch/205723/ for CI.
Ah.. thank you!
Regards,
Tvrtko
Quoted 88 lines
Quoted 88 lines · Tvrtko Ursulin
Quoted 18 lines
drivers/gpu/drm/i915/i915_params.h +1
-1@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \ param(char *, huc_firmware_path, NULL) \drivers/gpu/drm/i915/intel_uc.c +0
-0drivers/gpu/drm/i915/intel_uc.c static int __get_platform_enable_guc(struct · line 70
Quoted 8 lines
drivers/gpu/drm/i915/intel_uc.c +2
-0@@ -63,6 +63,8 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv) enable_guc |= ENABLE_GUC_LOAD_HUC; /* Any platform specific fine-tuning can be done here */ + if (intel_gvt_active(dev_priv)) + enable_guc = false; return enable_guc; }This patch results with:
<7>[ 10.742713] [drm:intel_uc_sanitize_options [i915]] enable_guc=3 (submission:yes huc:yes) <7>[ 10.742748] [drm:intel_uc_sanitize_options [i915]] guc_log_level=0 (enabled:no verbosity:-1)
and then:
<4>[ 10.792405] ------------[ cut here ]------------
<4>[ 10.792407]WARN_ON(!i915_memcpy_from_wc(((void *)0), ((void *)0), 0))
<4>[ 10.792458] WARNING: CPU: 0 PID: 236 atdrivers/gpu/drm/i915/intel_guc_log.c:616intel_guc_log_create+0x144/0x1c0[i915]
<4>[ 10.792460] Modules linked in: i915(+)crct10dif_pclmulcrc32_pclmulghash_clmulni_intele1000prime_numbersi2c_piix4
<4>[ 10.792474] CPU: 0 PID: 236 Comm: systemd-udevd Not tainted 4.16.0-rc2-CI-Patchwork_8097+ #1
<4>[ 10.792476] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
<4>[ 10.792510] RIP: 0010:intel_guc_log_create+0x144/0x1c0 [i915]
<4>[ 10.792512] RSP: 0018:ffffc9000023fae0 EFLAGS: 00010286
<4>[ 10.792515] RAX:000000000000003aRBX:ffff8800759d0ed0RCX: 0000000000000001
<4>[ 10.792516] RDX: 0000000080000001 RSI:ffffffff8210fb61RDI:00000000ffffffff
<4>[ 10.792518] RBP:ffff8800759d0ed0R08:ffff880079fd8940R09:00000000bf56e8ae
<4>[ 10.792519] R10: 0000000000000000 R11: 0000000000000000 R12:ffff8800759d0070
<4>[ 10.792521] R13:ffff880076a4da18R14: 0000000000000000 R15:ffff88007c93c548
<4>[ 10.792525] FS: 00007ff6ffc7f8c0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
<4>[ 10.792526] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 10.792528] CR2:00007fdabb4ab000CR3:0000000079fc6003CR4:00000000003606f0
<4>[ 10.792529] Call Trace:
<4>[ 10.792565]intel_guc_init+0x5d/0x100[i915]
<4>[ 10.792642]intel_uc_init+0x29/0xa0[i915]
<4>[ 10.792694]i915_gem_init+0x198/0x540[i915]
<4>[ 10.792727] ?intel_uc_fw_fetch+0x2db/0x650[i915]
<4>[ 10.792755]i915_driver_load+0xa56/0x1090[i915]
<4>[ 10.792760] ?trace_hardirqs_on_caller+0xde/0x1c0
<4>[ 10.792789]i915_pci_probe+0x2e/0x90[i915]
<4>[ 10.792793]pci_device_probe+0x9c/0x120
<4>[ 10.792798]driver_probe_device+0x2a4/0x480
<4>[ 10.792802]__driver_attach+0xd9/0xe0
<4>[ 10.792804] ?driver_probe_device+0x480/0x480
<4>[ 10.792807] ?driver_probe_device+0x480/0x480
<4>[ 10.792810]bus_for_each_dev+0x50/0x90
<4>[ 10.792814]bus_add_driver+0x168/0x260
<4>[ 10.792818]driver_register+0x52/0xc0
<4>[ 10.792820] ?0xffffffffa0294000
<4>[ 10.792822]do_one_initcall+0x39/0x150
<4>[ 10.792826] ?rcu_read_lock_sched_held+0x6f/0x80
<4>[ 10.792828] ?kmem_cache_alloc_trace+0x245/0x2b0
<4>[ 10.792833]do_init_module+0x56/0x1ef
<4>[ 10.792836]load_module+0x236b/0x2dc0
<4>[ 10.792840] ?show_coresize+0x20/0x20
<4>[ 10.792843] ?vfs_read+0x126/0x150
<4>[ 10.792851] ?SyS_finit_module+0xa5/0xe0
<4>[ 10.792853]SyS_finit_module+0xa5/0xe0
<4>[ 10.792862]do_syscall_64+0x65/0x1a0
<4>[ 10.792866]entry_SYSCALL_64_after_hwframe+0x42/0xb7
<4>[ 10.792868] RIP: 0033:0x7ff6feb0f499
<4>[ 10.792869] RSP: 002b:00007ffdf3058448 EFLAGS: 00000246ORIG_RAX: 0000000000000139
<4>[ 10.792872] RAX: ffffffffffffffda RBX:00005652dfedde90RCX:00007ff6feb0f499
<4>[ 10.792874] RDX: 0000000000000000 RSI:00007ff6ff005e23RDI:000000000000000f
<4>[ 10.792875] RBP:00007ff6ff005e23R08: 0000000000000000 R09: 0000000000000000
<4>[ 10.792877] R10:000000000000000fR11: 0000000000000246 R12: 0000000000000000
<4>[ 10.792878] R13:00005652dff1c180R14: 0000000000020000 R15:000000000aba9500
<4>[ 10.792886] Code: e1 0f 0b 48 c7 c6 a0 df 19 a0 48 c7 c7 39 df 19 a0 e8 e6 aa 00 e1 0f 0b 48 c7 c6 18 c2 1b a0 48 c7 c7 f7 de 19 a0 e8 0c 9f f9 e0 <0f> 0b b8 ea ff ff ff c7 05 97 95 16 00 00 00 00 00 48 83 c4 08 <4>[ 10.792968] ---[ end traceaa9469e091d0e5f0]---
Quoted 7 lines
Quoted 6 lines
So is
intel_gvt_activethe wrong thing to use, or in fact, is i915.enable_guc=-1 supposed to handle GVT to start with?Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tvrtko Ursulin
maintainerPATCH v4 1/1 drm/i915: GuC test run
In reply to Tvrtko UrsulinFrom: Tvrtko Ursulin <[email protected]>
With disabled aggressive idling from IGT. To see how shard run fares.
--- drivers/gpu/drm/i915/i915_debugfs.c | 3 --- drivers/gpu/drm/i915/i915_params.h | 2 +- drivers/gpu/drm/i915/intel_uc.c | 2 ++ 3 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +0 -3
@@ -4076,9 +4076,6 @@ i915_drop_caches_set(void *data, u64 val)i915_gem_shrink_all (dev_priv);fs_reclaim_release (GFP_KERNEL ); -if (val &DROP_IDLE ) -drain_delayed_work (&dev_priv->gt.idle_work); -if (val &DROP_FREED )i915_gem_drain_freed_objects (dev_priv);
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \
drivers/gpu/drm/i915/intel_uc.c +2 -0
@@ -63,6 +63,8 @@ static int __get_platform_enable_guc(struct drm_i915_private *dev_priv) enable_guc |=ENABLE_GUC_LOAD_HUC ;/* Any platform specific fine-tuning can be done here */ +if (boot_cpu_has (X86_FEATURE_HYPERVISOR )) + enable_guc =0 ;return enable_guc; }
Signature · 6 lines
2.14.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: GuC test run (rev2)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run (rev2)
URL : https://patchwork.freedesktop.org/series/38615/
State : failure
== Summary ==
Series 38615v2 drm/i915: GuC test run
https://patchwork.freedesktop.org/api/1.0/series/38615/revisions/2/mbox/
Test core_auth:
Subgroup basic-auth:
pass -> SKIP (fi-skl-gvtdvm)
Test core_prop_blob:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test debugfs_test:
Subgroup read_all_entries:
pass -> SKIP (fi-skl-gvtdvm)
Test drv_getparams_basic:
Subgroup basic-eu-total:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-subslice-total:
pass -> SKIP (fi-skl-gvtdvm)
Test drv_hangman:
Subgroup error-state-basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_basic:
Subgroup bad-close:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup create-close:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup create-fd-close:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_busy:
Subgroup basic-busy-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-hang-default:
pass -> SKIP (fi-skl-gvtdvm) fdo#104108 +3
Test gem_close_race:
Subgroup basic-process:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-threads:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_cpu_reloc:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_cs_tlb:
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_create:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-files:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_exec:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_param:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_switch:
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default-heavy:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_exec_basic:
Subgroup basic-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-render:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-vebox:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-render:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-vebox:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-default:
pass -> SKIP (fi-skl-gvtdvm)WARNING: Long output truncated
6697b76215fde36745a73b95453febbdb8c63991 drm-tip: 2018y-02m-20d-16h-40m-48s UTC integration manifest 675250077b67 drm/i915: GuC test run
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8087/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915: GuC test run (rev3)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run (rev3)
URL : https://patchwork.freedesktop.org/series/38615/
State : failure
== Summary ==
Series 38615v3 drm/i915: GuC test run
https://patchwork.freedesktop.org/api/1.0/series/38615/revisions/3/mbox/
Test core_auth:
Subgroup basic-auth:
pass -> SKIP (fi-skl-gvtdvm)
Test core_prop_blob:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test debugfs_test:
Subgroup read_all_entries:
pass -> SKIP (fi-skl-gvtdvm)
Test drv_getparams_basic:
Subgroup basic-eu-total:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-subslice-total:
pass -> SKIP (fi-skl-gvtdvm)
Test drv_hangman:
Subgroup error-state-basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_basic:
Subgroup bad-close:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup create-close:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup create-fd-close:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_busy:
Subgroup basic-busy-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-hang-default:
pass -> SKIP (fi-skl-gvtdvm) fdo#104108 +3
Test gem_close_race:
Subgroup basic-process:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-threads:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_cpu_reloc:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_cs_tlb:
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_create:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-files:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_exec:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_param:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_switch:
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default-heavy:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_exec_basic:
Subgroup basic-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-render:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-vebox:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-render:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-vebox:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-default:
pass -> SKIP (fi-skl-gvtdvm)WARNING: Long output truncated
75f20d94e9a1fdc486867a8f5bebe433b119f531 drm-tip: 2018y-02m-21d-07h-35m-14s UTC integration manifest 7ef655b817cf drm/i915: GuC test run
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8097/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: GuC test run (rev4)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run (rev4)
URL : https://patchwork.freedesktop.org/series/38615/
State : success
== Summary ==
Series 38615v4 drm/i915: GuC test run
https://patchwork.freedesktop.org/api/1.0/series/38615/revisions/4/mbox/
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:413s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:421s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:372s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:478s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:282s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:478s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:485s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:465s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:456s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:567s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:414s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:281s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:504s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:381s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:407s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:444s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:411s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:445s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:489s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:449s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:493s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:586s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:421s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:499s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:514s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:484s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:471s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:399s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:429s fi-snb-2520m total:245 pass:211 dwarn:0 dfail:0 fail:0 skip:33 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:388s
75f20d94e9a1fdc486867a8f5bebe433b119f531 drm-tip: 2018y-02m-21d-07h-35m-14s UTC integration manifest 793cfd16de4d drm/i915: GuC test run
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8101/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for drm/i915: GuC test run (rev4)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run (rev4)
URL : https://patchwork.freedesktop.org/series/38615/
State : failure
== Summary ==
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-pri-indfb-multidraw:
pass -> FAIL (shard-snb) fdo#103167
Test kms_chv_cursor_fail:
Subgroup pipe-b-64x64-bottom-edge:
dmesg-warn -> PASS (shard-snb) fdo#105185 +1
Test gem_exec_schedule:
Subgroup smoketest-all:
pass -> FAIL (shard-apl)
Subgroup smoketest-render:
pass -> FAIL (shard-apl)
Test perf:
Subgroup gen8-unprivileged-single-ctx-counters:
pass -> FAIL (shard-apl)
Test kms_flip:
Subgroup 2x-flip-vs-expired-vblank-interruptible:
fail -> PASS (shard-hsw) fdo#102887
Subgroup flip-vs-absolute-wf_vblank-interruptible:
fail -> PASS (shard-hsw) fdo#100368
Test drv_missed_irq:
pass -> SKIP (shard-apl)
Test gem_eio:
Subgroup in-flight-external:
fail -> PASS (shard-hsw) fdo#104676
Test drv_selftest:
Subgroup live_guc:
pass -> DMESG-WARN (shard-apl)fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
fdo#105185 https://bugs.freedesktop.org/show_bug.cgi?id=105185
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#104676 https://bugs.freedesktop.org/show_bug.cgi?id=104676
shard-apl total:3367 pass:1752 dwarn:2 dfail:0 fail:19 skip:1593 time:12202s shard-hsw total:3429 pass:1759 dwarn:1 dfail:0 fail:3 skip:1665 time:11603s shard-snb total:3429 pass:1348 dwarn:2 dfail:0 fail:3 skip:2076 time:6556s
Blacklisted hosts:
shard-kbl total:3281 pass:1770 dwarn:26 dfail:1 fail:24 skip:1456 time:8557s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8101/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: GuC test run (rev4)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run (rev4)
URL : https://patchwork.freedesktop.org/series/38615/
State : success
== Summary ==
Series 38615v4 drm/i915: GuC test run
https://patchwork.freedesktop.org/api/1.0/series/38615/revisions/4/mbox/
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713
Subgroup suspend-read-crc-pipe-c:
incomplete -> PASS (fi-bxt-dsi) fdo#103927fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:418s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:422s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:375s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:487s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:285s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:478s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:486s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:467s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:460s fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:567s fi-elk-e7500 total:288 pass:229 dwarn:0 dfail:0 fail:0 skip:59 time:413s fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:282s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:508s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:384s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:412s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:452s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:410s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:449s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:487s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:455s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:490s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:587s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:425s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:503s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:517s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:491s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:487s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:406s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:434s fi-snb-2520m total:245 pass:211 dwarn:0 dfail:0 fail:0 skip:33 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:397s
42016703e66b7b572d4ab651946b715cdbff3050 drm-tip: 2018y-02m-21d-21h-26m-53s UTC integration manifest fb0c41291286 drm/i915: GuC test run
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8117/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for drm/i915: GuC test run (rev4)
In reply to Tvrtko Ursulin== Series Details ==
== Series Details ==
Series: drm/i915: GuC test run (rev4)
URL : https://patchwork.freedesktop.org/series/38615/
State : failure
== Summary ==
Test kms_flip:
Subgroup modeset-vs-vblank-race:
fail -> PASS (shard-hsw) fdo#103060 +1
Test perf:
Subgroup gen8-unprivileged-single-ctx-counters:
pass -> FAIL (shard-apl)
Subgroup oa-exponents:
incomplete -> PASS (shard-apl) fdo#102254
Test kms_chv_cursor_fail:
Subgroup pipe-b-128x128-top-edge:
dmesg-warn -> PASS (shard-snb) fdo#105185
Test drv_selftest:
Subgroup live_guc:
pass -> DMESG-WARN (shard-apl)
Test prime_self_import:
Subgroup reimport-vs-gem_close-race:
pass -> FAIL (shard-hsw)
Test gem_exec_schedule:
Subgroup smoketest-all:
pass -> FAIL (shard-apl)
Subgroup smoketest-render:
pass -> FAIL (shard-apl)
Test drv_missed_irq:
pass -> SKIP (shard-apl)fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#102254 https://bugs.freedesktop.org/show_bug.cgi?id=102254
fdo#105185 https://bugs.freedesktop.org/show_bug.cgi?id=105185
shard-apl total:3369 pass:1753 dwarn:2 dfail:0 fail:23 skip:1590 time:12350s shard-hsw total:3464 pass:1766 dwarn:1 dfail:0 fail:3 skip:1693 time:11779s shard-snb total:3464 pass:1356 dwarn:1 dfail:0 fail:3 skip:2104 time:6669s
Blacklisted hosts:
shard-kbl total:3344 pass:1841 dwarn:10 dfail:0 fail:33 skip:1456 time:8517s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8117/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx