Skip to contentSkip to conversation

net: cpsw: fix probe with fixed-link

PATCH Superseded Andreas Schmidt 2 participants 4 messages Feb 13, 2018 – Feb 27, 2018 Network drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: cpsw: fix probe with fixed-link

If cpsw slave is set to fixed-link cpsw probe still try to probe and use a phy. This patch fix cpsw probe in case of fixed-link.

---
 drivers/net/cpsw.c | 41 +++++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 14 deletions(-)
drivers/net/cpsw.c +27 -14
index d11ca33f7..37e480248 100644
@@ -184,6 +184,7 @@ struct cpsw_slave {
 	struct eth_device		edev;
 	struct cpsw_priv		*cpsw;
 	struct device_d			dev;
+	int				fixed_link;
 };
 
 struct cpdma_desc {
@@ -913,18 +914,20 @@ static int cpsw_slave_setup(struct cpsw_slave *slave, int slave_num,
 	struct eth_device	*edev = &slave->edev;
 	struct device_d		*dev = &slave->dev;
 	int ret;
-	struct phy_device *phy;
+	struct phy_device *phy = NULL;
 
-	phy = mdiobus_scan(&priv->miibus, priv->slaves[slave_num].phy_id);
-	if (IS_ERR(phy)) {
-		ret = PTR_ERR(phy);
-		goto err_out;
-	}
+	if (!slave->fixed_link) {
+		phy = mdiobus_scan(&priv->miibus, priv->slaves[slave_num].phy_id);
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			goto err_out;
+		}
 
-	phy->dev.device_node = priv->slaves[slave_num].dev.device_node;
-	ret = phy_register_device(phy);
-	if (ret)
-		goto err_out;
+		phy->dev.device_node = priv->slaves[slave_num].dev.device_node;
+		ret = phy_register_device(phy);
+		if (ret)
+			goto err_out;
+	}
 
 	sprintf(dev->name, "cpsw-slave");
 	dev->id = slave->slave_num;
@@ -957,7 +960,8 @@ static int cpsw_slave_setup(struct cpsw_slave *slave, int slave_num,
 	return 0;
 
 err_register_dev:
-	phy_unregister_device(phy);
+	if (!slave->fixed_link)
+		phy_unregister_device(phy);
 err_register_edev:
 	unregister_device(dev);
 err_out:
@@ -1103,11 +1107,20 @@ static int cpsw_probe_dt(struct cpsw_priv *priv)
 			uint32_t phy_id[2];
 
 			ret = of_property_read_u32_array(child, "phy_id", phy_id, 2);
-			if (ret)
-				return ret;
+			if (!ret) {
+				slave->phy_id = phy_id[1];
+				slave->fixed_link = 0;
+			} else {
+				struct device_node *fl_np;
+				fl_np = of_find_node_by_name(child, "fixed-link");
+				if (fl_np) {
+					slave->phy_id = -1;
+					slave->fixed_link = 1;
+				} else
+					return ret;
+			}
 
 			slave->dev.device_node = child;
-			slave->phy_id = phy_id[1];
 			slave->phy_if = of_get_phy_mode(child);
 			slave->slave_num = i;
 
Signature · 7 lines
2.14.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw

Hi Andreas,

Quoted 28 lines · Andreas Schmidt

If cpsw slave is set to fixed-link cpsw probe still try to probe and use a phy. This patch fix cpsw probe in case of fixed-link.

---
 drivers/net/cpsw.c | 41 +++++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 14 deletions(-)
drivers/net/cpsw.c +2 -2
index d11ca33f7..37e480248 100644
@@ -184,6 +184,7 @@ struct cpsw_slave {
 	struct eth_device		edev;
 	struct cpsw_priv		*cpsw;
 	struct device_d			dev;
+	int				fixed_link;
 };
 
 struct cpdma_desc {
@@ -913,18 +914,20 @@ static int cpsw_slave_setup(struct cpsw_slave *slave, int slave_num,
 	struct eth_device	*edev = &slave->edev;
 	struct device_d		*dev = &slave->dev;
 	int ret;
-	struct phy_device *phy;
+	struct phy_device *phy = NULL;
 
-	phy = mdiobus_scan(&priv->miibus, priv->slaves[slave_num].phy_id);

drivers/net/cpsw.c static int cpsw_slave_setup(struct cpsw_slave *slave, int slave_num, · line 924

Quoted 10 lines
drivers/net/cpsw.c +6 -4
-	if (IS_ERR(phy)) {
-		ret = PTR_ERR(phy);
-		goto err_out;
-	}
+	if (!slave->fixed_link) {
+		phy = mdiobus_scan(&priv->miibus, priv->slaves[slave_num].phy_id);
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			goto err_out;
+		}

Calling mdiobus_scan() here is not only wrong for a fixed phy, it is wrong for a regular mdiobus phy aswell. I just sent out a patch which just removes the call to mdiobus_scan(). Tested on a beaglebone which has a real phy, it should work for you aswell.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

PATCH v2 1/1 net: cpsw: fix probe with fixed-link

While cpsw is probe dt, it accepts only slaves nodes with "phy_id" property. In case of fixed-link there are no "phy_id" property and probe would be failed. This patch avoid the failure due to missing "phy_id" in case of fixed-link.

---

Changes since v1:
- rework after "[PATCH] net: cpsw: remove unnecessary mdiobus_scan()" patch was committed.

---
 drivers/net/cpsw.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/net/cpsw.c +6 -4
index 928b97774..3d3939cfa 100644
@@ -1089,11 +1089,13 @@ static int cpsw_probe_dt(struct cpsw_priv *priv)
 
 		if (i < priv->num_slaves && !strncmp(child->name, "slave", 5)) {
 			struct cpsw_slave *slave = &priv->slaves[i];
-			uint32_t phy_id[2];
+			uint32_t phy_id[2] = {-1, -1};
 
-			ret = of_property_read_u32_array(child, "phy_id", phy_id, 2);
-			if (ret)
-				return ret;
+			if (!of_find_node_by_name(child, "fixed-link")) {
+				ret = of_property_read_u32_array(child, "phy_id", phy_id, 2);
+				if (ret)
+					return ret;
+			}
 
 			slave->dev.device_node = child;
 			slave->phy_id = phy_id[1];
Signature · 7 lines
2.14.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#3 lore raw
Quoted 5 lines · Andreas Schmidt

While cpsw is probe dt, it accepts only slaves nodes with "phy_id" property. In case of fixed-link there are no "phy_id" property and probe would be failed. This patch avoid the failure due to missing "phy_id" in case of fixed-link.

Quoted 8 lines

---

Changes since v1:
- rework after "[PATCH] net: cpsw: remove unnecessary mdiobus_scan()" patch was committed.

---
 drivers/net/cpsw.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

Applied, thanks

Sascha

Quoted 32 lines
drivers/net/cpsw.c +6 -4
index 928b97774..3d3939cfa 100644
@@ -1089,11 +1089,13 @@ static int cpsw_probe_dt(struct cpsw_priv *priv)
 
 		if (i < priv->num_slaves && !strncmp(child->name, "slave", 5)) {
 			struct cpsw_slave *slave = &priv->slaves[i];
-			uint32_t phy_id[2];
+			uint32_t phy_id[2] = {-1, -1};
 
-			ret = of_property_read_u32_array(child, "phy_id", phy_id, 2);
-			if (ret)
-				return ret;
+			if (!of_find_node_by_name(child, "fixed-link")) {
+				ret = of_property_read_u32_array(child, "phy_id", phy_id, 2);
+				if (ret)
+					return ret;
+			}
 
 			slave->dev.device_node = child;
 			slave->phy_id = phy_id[1];
Signature · 7 lines
2.14.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox