Initial support for NXP iMX8 (imx8mq-evk)
v2 cover Initial support for NXP iMX8 (imx8mq-evk)
This series provides initial support for NXP iMX8 (imx8mq-evk).
This series of patches are tested against NXP imx8mq-evk. It only handles basic support for iIMX8M, currently no support for GPU, VPU and other HW features. This series makes it possible to build a minimal system for imx8mq-evk.
Changes since v1
================
- Removed new imx-atf package, use boot/arm-trusted-firmware.
- Move imx-mkimage from package/freescale-imx to package.
- Add upstream URL for imx-mkimage in Config.in.host.
- Fix install command syntax for imx-mkimage package.
- Use Makefile in imx-mkimage to build imx-boot-imx8mqevk-sd.bin instead of doing that in the post-script.sh
- Split third commit into two, one for firmware-img package and one for iMX8 board.
Erik Larsson (3):
imx-mkimage: new package
firmware-imx: add support for iMX8M firmware add support iMX8MQ-evk board
.../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 10 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 37 ++ package/Config.in.host | 1 + package/freescale-imx/Config.in | 4 +- package/freescale-imx/firmware-imx/Config.in | 2 +- package/freescale-imx/firmware-imx/firmware-imx.mk | 8 + .../imx-mkimage/0001-remove-git-build-info.patch | 28 + package/imx-mkimage/Config.in.host | 11 + package/imx-mkimage/imx-mkimage.hash | 3 + package/imx-mkimage/imx-mkimage.mk | 41 ++ 12 files changed, 805 insertions(+), 5 deletions(-) create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8 create mode 100644 board/freescale/imx8mqevk/linux-4.9.config create mode 100644 configs/freescale_imx8mqevk_defconfig create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch create mode 100644 package/imx-mkimage/Config.in.host create mode 100644 package/imx-mkimage/imx-mkimage.hash create mode 100644 package/imx-mkimage/imx-mkimage.mk
Signature · 1 line
2.7.4
PATCH v2 1/3 imx-mkimage: new package
This package add support for imx-mkimage for iMX8M. Currently the only hardware it's tested for.
--- package/Config.in.host | 1 + .../imx-mkimage/0001-remove-git-build-info.patch | 28 +++++++++++++++ package/imx-mkimage/Config.in.host | 11 ++++++ package/imx-mkimage/imx-mkimage.hash | 3 ++ package/imx-mkimage/imx-mkimage.mk | 41 ++++++++++++++++++++++ 5 files changed, 84 insertions(+) create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch create mode 100644 package/imx-mkimage/Config.in.host create mode 100644 package/imx-mkimage/imx-mkimage.hash create mode 100644 package/imx-mkimage/imx-mkimage.mk
package/Config.in.host +1 -0
@@ -24,6 +24,7 @@ menu "Host utilities" source "package/go-bootstrap/Config.in.host" source "package/google-breakpad/Config.in.host" source "package/gptfdisk/Config.in.host" + source "package/imx-mkimage/Config.in.host" source "package/imx-usb-loader/Config.in.host" source "package/jq/Config.in.host" source "package/jsmin/Config.in.host"
package/imx-mkimage/0001-remove-git-build-info.patch new file +28 -0
@@ -0,0 +1,28 @@ +From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001 +From: Erik Larsson <[email protected]> +Date: Thu, 22 Feb 2018 09:56:53 +0100 +Subject: [PATCH] Remove buildinformation step. + +Signed-off-by: Erik Larsson <[email protected]> +--- + Makefile | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 4b449ad..4042a39 100644 +--- a/Makefile ++++ b/Makefile +@@ -33,9 +33,7 @@ $(MKIMG): buildinfo $(SRCS) + bin: $(MKIMG) + + buildinfo: +- @echo -n '#define MKIMAGE_COMMIT 0x' > src/build_info.h +- @git rev-parse --short=8 HEAD >> src/build_info.h +- @echo '' >> src/build_info.h ++ @echo "#define MKIMAGE_COMMIT 0x0000" > src/build_info.h + + help: + @echo $(CURR_DIR) +-- +2.7.4 +
package/imx-mkimage/Config.in.host new file +11 -0
@@ -0,0 +1,11 @@ +config BR2_PACKAGE_HOST_IMX_MKIMAGE + bool "host imx-mkimage" + select BR2_PACKAGE_HOST_UBOOT_TOOLS + select BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT + depends on BR2_LINUX_KERNEL + depends on BR2_TARGET_UBOOT + help + imx-mkimage is used to combine input images and generate + final boot image with appropriate IVT set. + + https://source.codeaurora.org/external/imx/imx-mkimage
package/imx-mkimage/imx-mkimage.hash new file +3 -0
@@ -0,0 +1,3 @@ +# Locally calculated +sha256 4ddb144520001c33baa24493f68ef2ea9434ac36bf3ae223f78d7ec581aa484c imx-mkimage-imx_4.9.51_imx8m_beta.tar.gz +sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c iMX8dv/COPYING
package/imx-mkimage/imx-mkimage.mk new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 1/3 imx-mkimage: new package
Erik,
Quoted 4 lines · Erik Larsson
This package add support for imx-mkimage for iMX8M. Currently the only hardware it's tested for.
Signed-off-by Erik Larsson <[email protected]>
Still no Crille nor Marcus? :-)
Same for the all patches in this set.
Quoted 90 lines
--- package/Config.in.host | 1 + .../imx-mkimage/0001-remove-git-build-info.patch | 28 +++++++++++++++ package/imx-mkimage/Config.in.host | 11 ++++++ package/imx-mkimage/imx-mkimage.hash | 3 ++ package/imx-mkimage/imx-mkimage.mk | 41 ++++++++++++++++++++++ 5 files changed, 84 insertions(+) create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch create mode 100644 package/imx-mkimage/Config.in.host create mode 100644 package/imx-mkimage/imx-mkimage.hash create mode 100644 package/imx-mkimage/imx-mkimage.mkpackage/Config.in.host +1
-0@@ -24,6 +24,7 @@ menu "Host utilities" source "package/go-bootstrap/Config.in.host" source "package/google-breakpad/Config.in.host" source "package/gptfdisk/Config.in.host" + source "package/imx-mkimage/Config.in.host" source "package/imx-usb-loader/Config.in.host" source "package/jq/Config.in.host" source "package/jsmin/Config.in.host"package/imx-mkimage/0001-remove-git-build-info.patch new file +28
-0@@ -0,0 +1,28 @@ +From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001 +From: Erik Larsson <[email protected]> +Date: Thu, 22 Feb 2018 09:56:53 +0100 +Subject: [PATCH] Remove buildinformation step. + +Signed-off-by: Erik Larsson <[email protected]> +--- + Makefile | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +diff --git a/Makefile b/Makefile +index 4b449ad..4042a39 100644 +--- a/Makefile ++++ b/Makefile +@@ -33,9 +33,7 @@ $(MKIMG): buildinfo $(SRCS) + bin: $(MKIMG) + + buildinfo: +- @echo -n '#define MKIMAGE_COMMIT 0x' > src/build_info.h +- @git rev-parse --short=8 HEAD >> src/build_info.h +- @echo '' >> src/build_info.h ++ @echo "#define MKIMAGE_COMMIT 0x0000" > src/build_info.h + + help: + @echo $(CURR_DIR) +-- +2.7.4 +package/imx-mkimage/Config.in.host new file +11
-0@@ -0,0 +1,11 @@ +config BR2_PACKAGE_HOST_IMX_MKIMAGE + bool "host imx-mkimage" + select BR2_PACKAGE_HOST_UBOOT_TOOLS + select BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT + depends on BR2_LINUX_KERNEL + depends on BR2_TARGET_UBOOT + help + imx-mkimage is used to combine input images and generate + final boot image with appropriate IVT set. + + https://source.codeaurora.org/external/imx/imx-mkimagepackage/imx-mkimage/imx-mkimage.hash new file +3
-0@@ -0,0 +1,3 @@ +# Locally calculated +sha256 4ddb144520001c33baa24493f68ef2ea9434ac36bf3ae223f78d7ec581aa484c imx-mkimage-imx_4.9.51_imx8m_beta.tar.gz +sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c iMX8dv/COPYINGpackage/imx-mkimage/imx-mkimage.mk new file +0
-0
package/imx-mkimage/imx-mkimage.mk line 10
Quoted 10 lines
package/imx-mkimage/imx-mkimage.mk new file +10
-0@@ -0,0 +1,41 @@ +################################################################################ +# +# imx-mkimage +# +################################################################################ + +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage +IMX_MKIMAGE_SITE_METHOD = git +IMX_MKIMAGE_LICENSE = GPL-2.0
The license is GPL-2.0+ as pointed out in v1.
Best regards
Marcus Folkesson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180222/8dab871e/attachment.asc>
PATCH v2 1/3 imx-mkimage: new package
In reply to Erik LarssonHi Erik,
Quoted 41 lines · Erik Larsson
This package add support for imx-mkimage for iMX8M. Currently the only hardware it's tested for.
Signed-off-by Erik Larsson <[email protected]>--- package/Config.in.host | 1 + .../imx-mkimage/0001-remove-git-build-info.patch | 28 +++++++++++++++ package/imx-mkimage/Config.in.host | 11 ++++++ package/imx-mkimage/imx-mkimage.hash | 3 ++ package/imx-mkimage/imx-mkimage.mk | 41 ++++++++++++++++++++++ 5 files changed, 84 insertions(+) create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch create mode 100644 package/imx-mkimage/Config.in.host create mode 100644 package/imx-mkimage/imx-mkimage.hash create mode 100644 package/imx-mkimage/imx-mkimage.mkpackage/Config.in.host +1
-0@@ -24,6 +24,7 @@ menu "Host utilities" source "package/go-bootstrap/Config.in.host" source "package/google-breakpad/Config.in.host" source "package/gptfdisk/Config.in.host" + source "package/imx-mkimage/Config.in.host" source "package/imx-usb-loader/Config.in.host" source "package/jq/Config.in.host" source "package/jsmin/Config.in.host"package/imx-mkimage/0001-remove-git-build-info.patch new file +7
-0@@ -0,0 +1,28 @@ +From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001 +From: Erik Larsson <[email protected]> +Date: Thu, 22 Feb 2018 09:56:53 +0100 +Subject: [PATCH] Remove buildinformation step. + +Signed-off-by: Erik Larsson <[email protected]> +---
[snip]
Quoted 24 lines
package/imx-mkimage/imx-mkimage.mk new file +18
-0@@ -0,0 +1,41 @@ +################################################################################ +# +# imx-mkimage +# +################################################################################ + +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage +IMX_MKIMAGE_SITE_METHOD = git +IMX_MKIMAGE_LICENSE = GPL-2.0 +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING +HOST_IMX_MKIMAGE_DEPENDENCIES = uboot linux firmware-imx arm-trusted-firmware + +define HOST_IMX_MKIMAGE_BUILD_CMDS + # These files are generated by firmware-imx, uboot and arm-trusted-firmware + # Copy the files into the iMX8M folder to make building of this package simple + # The NXP engineers has constructed to buildprocess with a bunch of hardcoded + # file names and pathes.
package/imx-mkimage/imx-mkimage.mk line 28
Quoted 10 lines
package/imx-mkimage/imx-mkimage.mk new file +10
-0+ + # Currently this only supports iMX8M. When more hardware is available + # this needs to be selectable based on iMX8-version (iMX8M,iMXQ etc). + cp $(BINARIES_DIR)/u-boot-spl.bin $(@D)/iMX8M + cp $(BINARIES_DIR)/lpddr4_pmu_train* $(@D)/iMX8M + cp $(BINARIES_DIR)/fsl-imx8mq-evk.dtb $(@D)/iMX8M + cp $(BINARIES_DIR)/bl31.bin $(@D)/iMX8M + + # We must rename this file because mkimage_fit_atf.sh has hardcoded names + cp ${BINARIES_DIR}/u-boot.bin $(@D)/iMX8M/u-boot-nodtb.bin
While testing here again I have seen that NXP provided U-Boot generates an image named u-boot-nodtb.bin in top level directory, which is not the same as u-boot.bin. So you might want to set BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME to u-boot-nodtb.bin, and copy that file directly, without rename.
baruch
Quoted 13 lines
package/imx-mkimage/imx-mkimage.mk new file +13
-0+ + # In soc.mk it's hardcoded that the mkimage tool is named mkimage_uboot + # and that it's located in the iMX8M folder. + cp $(HOST_DIR)/bin/mkimage $(@D)/iMX8M/mkimage_uboot + + $(MAKE) -C $(@D) SOC=iMX8M flash_spl_uboot +endef + +define HOST_IMX_MKIMAGE_INSTALL_CMDS + $(INSTALL) -D -m 755 $(@D)/iMX8M/flash.bin $(BINARIES_DIR)/imx-boot-imx8mqevk-sd.bin +endef + +$(eval $(host-generic-package))
Signature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -PATCH v2 1/3 imx-mkimage: new package
Hi Baruch,
2018-02-25 9:43 GMT+01:00 Baruch Siach <[email protected]>:
Quoted 78 lines
Hi Erik,
Quoted 41 lines · Erik Larsson
This package add support for imx-mkimage for iMX8M. Currently the only hardware it's tested for.
Signed-off-by Erik Larsson <[email protected]>--- package/Config.in.host | 1 + .../imx-mkimage/0001-remove-git-build-info.patch | 28 +++++++++++++++ package/imx-mkimage/Config.in.host | 11 ++++++ package/imx-mkimage/imx-mkimage.hash | 3 ++ package/imx-mkimage/imx-mkimage.mk | 41 ++++++++++++++++++++++ 5 files changed, 84 insertions(+) create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch create mode 100644 package/imx-mkimage/Config.in.host create mode 100644 package/imx-mkimage/imx-mkimage.hash create mode 100644 package/imx-mkimage/imx-mkimage.mkpackage/Config.in.host +1
-0@@ -24,6 +24,7 @@ menu "Host utilities" source "package/go-bootstrap/Config.in.host" source "package/google-breakpad/Config.in.host" source "package/gptfdisk/Config.in.host" + source "package/imx-mkimage/Config.in.host" source "package/imx-usb-loader/Config.in.host" source "package/jq/Config.in.host" source "package/jsmin/Config.in.host"package/imx-mkimage/0001-remove-git-build-info.patch new file +7
-0@@ -0,0 +1,28 @@ +From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001 +From: Erik Larsson <[email protected]> +Date: Thu, 22 Feb 2018 09:56:53 +0100 +Subject: [PATCH] Remove buildinformation step. + +Signed-off-by: Erik Larsson <[email protected]> +---[snip]
Quoted 31 lines
package/imx-mkimage/imx-mkimage.mk new file +25
-0@@ -0,0 +1,41 @@ +################################################################################ +# +# imx-mkimage +# +################################################################################ + +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage +IMX_MKIMAGE_SITE_METHOD = git +IMX_MKIMAGE_LICENSE = GPL-2.0 +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING +HOST_IMX_MKIMAGE_DEPENDENCIES = uboot linux firmware-imx arm-trusted-firmware + +define HOST_IMX_MKIMAGE_BUILD_CMDS + # These files are generated by firmware-imx, uboot and arm-trusted-firmware + # Copy the files into the iMX8M folder to make building of this package simple + # The NXP engineers has constructed to buildprocess with a bunch of hardcoded + # file names and pathes. + + # Currently this only supports iMX8M. When more hardware is available + # this needs to be selectable based on iMX8-version (iMX8M,iMXQ etc). + cp $(BINARIES_DIR)/u-boot-spl.bin $(@D)/iMX8M + cp $(BINARIES_DIR)/lpddr4_pmu_train* $(@D)/iMX8M + cp $(BINARIES_DIR)/fsl-imx8mq-evk.dtb $(@D)/iMX8M + cp $(BINARIES_DIR)/bl31.bin $(@D)/iMX8M
Quoted 8 lines
package/imx-mkimage/imx-mkimage.mk line 28
Quoted 3 lines
package/imx-mkimage/imx-mkimage.mk new file +3
-0+ + # We must rename this file because mkimage_fit_atf.sh has hardcoded names + cp ${BINARIES_DIR}/u-boot.bin $(@D)/iMX8M/u-boot-nodtb.binWhile testing here again I have seen that NXP provided U-Boot generates an image named u-boot-nodtb.bin in top level directory, which is not the same as u-boot.bin. So you might want to set
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAMEto u-boot-nodtb.bin, and copy that file directly, without rename.
Thank you! I'll test that,
Quoted 13 lines
baruch
Quoted 10 lines
package/imx-mkimage/imx-mkimage.mk new file +10
-0+ + # In soc.mk it's hardcoded that the mkimage tool is named mkimage_uboot + # and that it's located in the iMX8M folder. + cp $(HOST_DIR)/bin/mkimage $(@D)/iMX8M/mkimage_uboot + + $(MAKE) -C $(@D) SOC=iMX8M flash_spl_uboot +endef + +define HOST_IMX_MKIMAGE_INSTALL_CMDS + $(INSTALL) -D -m 755 $(@D)/iMX8M/flash.bin $(BINARIES_DIR)/imx-boot-imx8mqevk-sd.bin
Quoted 8 lines
package/imx-mkimage/imx-mkimage.mk line 41
Quoted 3 lines
package/imx-mkimage/imx-mkimage.mk new file +3
-0+endef + +$(eval $(host-generic-package))--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
/Erik
PATCH v2 2/3 firmware-imx: add support for iMX8M firmware
In reply to Erik Larsson--- package/freescale-imx/Config.in | 4 +++- package/freescale-imx/firmware-imx/Config.in | 2 +- package/freescale-imx/firmware-imx/firmware-imx.mk | 8 ++++++++ 3 files changed, 12 insertions(+), 2 deletions(-)
package/freescale-imx/Config.in +3 -1
@@ -1,6 +1,6 @@ menuconfig BR2_PACKAGE_FREESCALE_IMX bool "Freescale i.MX libraries" - depends on BR2_arm + depends on BR2_arm || BR2_aarch64 help Those packages provide hardware acceleration for GPU or VPU, hardware optimization or some hardware tools for Freescale
@@ -40,6 +40,8 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7 bool "imx7d/imx7ulp" +config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M + bool "imx8m" endchoice config BR2_PACKAGE_FREESCALE_IMX_PLATFORM
package/freescale-imx/firmware-imx/Config.in +1 -1
@@ -1,6 +1,6 @@ config BR2_PACKAGE_FIRMWARE_IMX bool "firmware-imx" - depends on BR2_arm # Only relevant for i.MX + depends on BR2_arm || BR2_aarch64 # Only relevant for i.MX help Firmware blobs for the Freescale i.MX SoCs.
package/freescale-imx/firmware-imx/firmware-imx.mk +8 -0
@@ -18,6 +18,13 @@ define FIRMWARE_IMX_EXTRACT_CMDS $(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(FIRMWARE_IMX_SOURCE)) endef +ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y) +FIRMWARE_IMX_INSTALL_IMAGES = YES +define FIRMWARE_IMX_INSTALL_IMAGES_CMDS + cp $(@D)/firmware/ddr/synopsys/lpddr4_pmu_train_*.bin $(BINARIES_DIR) + cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(BINARIES_DIR) +endef +else define FIRMWARE_IMX_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/lib/firmware/imx for blobdir in $(FIRMWARE_IMX_BLOBS); do \
@@ -27,5 +34,6 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \ $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw endef +endif $(eval $(generic-package))
Signature · 1 line
2.7.4
PATCH v2 2/3 firmware-imx: add support for iMX8M firmware
Hi Erik,
Quoted 20 lines · Erik Larsson
Signed-off-by Erik Larsson <[email protected]>--- package/freescale-imx/Config.in | 4 +++- package/freescale-imx/firmware-imx/Config.in | 2 +- package/freescale-imx/firmware-imx/firmware-imx.mk | 8 ++++++++ 3 files changed, 12 insertions(+), 2 deletions(-)package/freescale-imx/Config.in +1
-1@@ -1,6 +1,6 @@ menuconfig BR2_PACKAGE_FREESCALE_IMX bool "Freescale i.MX libraries" - depends on BR2_arm + depends on BR2_arm || BR2_aarch64 help Those packages provide hardware acceleration for GPU or VPU, hardware optimization or some hardware tools for Freescale
package/freescale-imx/Config.in config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL · line 47
Quoted 8 lines
package/freescale-imx/Config.in +2
-0@@ -40,6 +40,8 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7 bool "imx7d/imx7ulp" +config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M + bool "imx8m" endchoice config BR2_PACKAGE_FREESCALE_IMX_PLATFORM
I actually this should be a separate patch that just adds i.MX8M to the list of supported devices.
Also it is missing BR2_PACKAGE_FREESCALE_IMX_PLATFORM assignment to "IMX8" in order to match Yocto platform naming.
Finally, as an optional step we could hide packages that don't apply to that architecture such as imx-lib, but that can come later.
Regards,
Gary
PATCH v2 3/3 add support iMX8MQ-evk board
In reply to Erik Larsson--- .../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 10 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 37 ++ 4 files changed, 709 insertions(+), 3 deletions(-) create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8 create mode 100644 board/freescale/imx8mqevk/linux-4.9.config create mode 100644 configs/freescale_imx8mqevk_defconfig
board/freescale/common/imx/genimage.cfg.template_imx8 new file +40 -0
@@ -0,0 +1,40 @@ +# Minimal SD card image for the Freescale boards Template for SPL Boot +# +# We mimic the .sdcard Freescale's image format: +# * the SD card must have 33 kB free space at the beginning, +# * U-Boot is integrated into imx-boot-imx8mqevk-sd.bin and is dumped as is, +# * a FAT partition at offset 64MB is containing Image and DTB files +# * a single root filesystem partition is required (ext2, ext3 or ext4) +# + +image boot.vfat { + vfat { + files = { + %FILES% + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition imx-boot { + in-partition-table = "no" + image = "imx-boot-imx8mqevk-sd.bin" + offset = 33K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +}
board/freescale/common/imx/post-image.sh +7 -3
@@ -7,10 +7,10 @@ # dtb_list() { - local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})" + local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})" for dt in $DTB_LIST; do - echo -n "\"$dt.dtb\", " + echo -n "\"`basename $dt`.dtb\", " done }
@@ -23,6 +23,8 @@ linux_image() { if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then echo "\"uImage\"" + elif grep -Eq "^BR2_LINUX_KERNEL_IMAGE=y$" ${BR2_CONFIG}; then + echo "\"Image\"" else echo "\"zImage\"" fi
@@ -30,7 +32,9 @@ linux_image() genimage_type() { - if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then + if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then + echo "genimage.cfg.template_imx8" + elif grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then echo "genimage.cfg.template_spl" else echo "genimage.cfg.template"
board/freescale/imx8mqevk/linux-4.9.config new file +625 -0
625 lines not on this page · raw message
configs/freescale_imx8mqevk_defconfig new file +37 -0
@@ -0,0 +1,37 @@ +BR2_aarch64=y +BR2_ARM_FPU_VFPV3=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/imx8mqevk/linux-4.9.config" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-imx8mq-evk" +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/imx-atf" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="imx_v2017.03_4.9.51_imx8m_beta" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk" +BR2_TARGET_UBOOT_FORMAT_IMX=y +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_IMX_MKIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y
Signature · 1 line
2.7.4
PATCH v2 3/3 add support iMX8MQ-evk board
Hi Erik,
Quoted 6 lines · Erik Larsson
Signed-off-by Erik Larsson <[email protected]>--- .../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 10 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 37 ++
Why do we copy the defconfig in board folder although it present in the kernel tree directly?
Regards,
Gary
PATCH v2 3/3 add support iMX8MQ-evk board
Hi Gary,
2018-02-23 11:43 GMT+01:00 Gary Bisson <[email protected]>:
Quoted 10 lines
Hi Erik,
Quoted 6 lines · Erik Larsson
Signed-off-by Erik Larsson <[email protected]>--- .../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 10 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 37 ++
Quoted 2 lines
Why do we copy the defconfig in board folder although it present in the kernel tree directly?
The reason I add the kernel defconfig into the board folder is that NXP removed all defconfigs and renamed the valid one to 'defconfig' in the kernel. This makes it impossible (at least I think so) to use an in tree defconfig.
$ ls -l arch/arm64/configs/ total 16 -rw-r--r-- 1 erik erik 14337 dec 15 02:52 defconfig
Copying it into the board folder was the best solution available.
Quoted 3 lines
Regards,
Gary
Regards,
Erik
PATCH v2 3/3 add support iMX8MQ-evk board
Quoted 20 lines · Erik Larsson
Hi Gary,
2018-02-23 11:43 GMT+01:00 Gary Bisson <[email protected]>:
Quoted 10 lines
Hi Erik,
Quoted 6 lines · Erik Larsson
Signed-off-by Erik Larsson <[email protected]>--- .../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 10 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 37 ++Quoted 2 lines
Why do we copy the defconfig in board folder although it present in the kernel tree directly?
The reason I add the kernel defconfig into the board folder is that NXP removed all defconfigs and renamed the valid one to 'defconfig' in the kernel. This makes it impossible (at least I think so) to use an in tree defconfig.
Quoted 5 lines
$ ls -l arch/arm64/configs/ total 16 -rw-r--r-- 1 erik erik 14337 dec 15 02:52 defconfigCopying it into the board folder was the best solution available.
You should be able to use that in-tree defconfig withBR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
PATCH v2 3/3 add support iMX8MQ-evk board
In reply to Erik LarssonHi Erik,
Quoted 10 lines · Erik Larsson
Signed-off-by Erik Larsson <[email protected]>--- .../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 10 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 37 ++ 4 files changed, 709 insertions(+), 3 deletions(-) create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8 create mode 100644 board/freescale/imx8mqevk/linux-4.9.config create mode 100644 configs/freescale_imx8mqevk_defconfig
[snip]
Quoted 6 lines
configs/freescale_imx8mqevk_defconfig new file +0
-0
configs/freescale_imx8mqevk_defconfig line 9
Quoted 9 lines
configs/freescale_imx8mqevk_defconfig new file +9
-0@@ -0,0 +1,37 @@ +BR2_aarch64=y +BR2_ARM_FPU_VFPV3=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta"
For the sake of reproducibility we don't use branch names in defconfigs, since these might change over time. Use the 'rel_imx_4.9.51_8mq_beta' tag name instead. If you believe that commits that follow that tag are essential, you can use the raw commit id of current imx_4.9.51_imx8m_beta branch tip.
Quoted 11 lines
configs/freescale_imx8mqevk_defconfig new file +11
-0+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/imx8mqevk/linux-4.9.config" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-imx8mq-evk" +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
configs/freescale_imx8mqevk_defconfig line 30
Quoted 10 lines
configs/freescale_imx8mqevk_defconfig new file +10
-0+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/imx-atf" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="imx_v2017.03_4.9.51_imx8m_beta"
This is also a branch. You can use the 'o8.0.0_1.3.0_8m-prc' tag, which is currently almost the same, or a commit id.
configs/freescale_imx8mqevk_defconfig line 37
Quoted 7 lines
configs/freescale_imx8mqevk_defconfig new file +7
-0+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk" +BR2_TARGET_UBOOT_FORMAT_IMX=y +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_IMX_MKIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y
baruch
Signature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -PATCH v2 3/3 add support iMX8MQ-evk board
In reply to Erik LarssonHello,
Quoted 1 line · Erik Larsson
Signed-off-by Erik Larsson <[email protected]>
Minor nit: the commit title should be something like:
configs/freescale_imx8mqevk: new defconfig
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
v2 cover Initial support for NXP iMX8 (imx8mq-evk)
In reply to Erik LarssonErik,
Quoted 7 lines · Erik Larsson
This series provides initial support for NXP iMX8 (imx8mq-evk).
This series of patches are tested against NXP imx8mq-evk. It only handles basic support for iIMX8M, currently no support for GPU, VPU and other HW features. This series makes it possible to build a minimal system for imx8mq-evk.
Quoted 8 lines
Changes since v1
================
- Removed new imx-atf package, use boot/arm-trusted-firmware.
- Move imx-mkimage from package/freescale-imx to package.
- Add upstream URL for imx-mkimage in Config.in.host.
- Fix install command syntax for imx-mkimage package.
- UseMakefilein imx-mkimage to build imx-boot-imx8mqevk-sd.bin instead of doing that in thepost-script.sh
- Split third commit into two, one for firmware-img package and one for iMX8 board.
Please keep the version history in the patches below the --- marker [1]. It is easier to follow how each patch has evolved.
Also, when you submit a new version of a patchset, please mark the old one as superseeded in patchwork [1].
Quoted 18 lines
Erik Larsson (3):
imx-mkimage: new package
firmware-imx: add support for iMX8M firmware add support iMX8MQ-evk board.../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 10 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 37 ++ package/Config.in.host | 1 + package/freescale-imx/Config.in | 4 +- package/freescale-imx/firmware-imx/Config.in | 2 +- package/freescale-imx/firmware-imx/firmware-imx.mk | 8 + .../imx-mkimage/0001-remove-git-build-info.patch | 28 + package/imx-mkimage/Config.in.host | 11 + package/imx-mkimage/imx-mkimage.hash | 3 + package/imx-mkimage/imx-mkimage.mk | 41 ++
Quoted 16 lines
12 files changed, 805 insertions(+), 5 deletions(-) create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8 create mode 100644 board/freescale/imx8mqevk/linux-4.9.config create mode 100644 configs/freescale_imx8mqevk_defconfig create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch create mode 100644 package/imx-mkimage/Config.in.host create mode 100644 package/imx-mkimage/imx-mkimage.hash create mode 100644 package/imx-mkimage/imx-mkimage.mkSignature · 6 lines
2.7.4 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
[1] https://github.com/buildroot/buildroot/blob/master/docs/manual/contribute.txt
Best regards
Marcus Folkesson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180222/b6b7a3c2/attachment.asc>
v2 cover Initial support for NXP iMX8 (imx8mq-evk)
In reply to Erik LarssonHello Erik,
Quoted 4 lines · Erik Larsson
Erik Larsson (3):
imx-mkimage: new package
firmware-imx: add support for iMX8M firmware
add support iMX8MQ-evk board
Thanks for this new iteration. Seeing the number of comments you have received, I'll mark the patches as "Changes Requested" in our patch tracking system. Could you resubmit a new version that takes into account the comments ?
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com
v2 cover Initial support for NXP iMX8 (imx8mq-evk)
Of course!
I just need to sort everything out and test it again!
And thanks you all for your reviews! As a knewbie contributer I really appreciate all the feedback.
2018-02-25 22:19 GMT+01:00 Thomas Petazzoni <[email protected]>:
Quoted 21 lines
Hello Erik,
Quoted 4 lines · Erik Larsson
Erik Larsson (3):
imx-mkimage: new package
firmware-imx: add support for iMX8M firmware
add support iMX8MQ-evk boardThanks for this new iteration. Seeing the number of comments you have received, I'll mark the patches as "Changes Requested" in our patch tracking system. Could you resubmit a new version that takes into account the comments ?
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering
http://bootlin.com