ALSA: usb-audio: Add a quirck for B&W PX headphones
PATCH 1/1 ALSA: usb-audio: Add a quirck for B&W PX headphones
From: Erik Veijola <[email protected]>
The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates.
Signed-off-by Erik Veijola <[email protected]>
--- sound/usb/quirks-table.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
sound/usb/quirks-table.h +47 -0
@@ -3325,4 +3325,51 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } }, +{ +/* +* Bower's & Wilkins PX headphones only support the 48 kHz sample rate +* even though it advertises more. The capture interface doesn't work +* even on windows. +*/ + USB_DEVICE(0x19b5, 0x0021), + .driver_info = (unsigned long ) &(const struct snd_usb_audio_quirk ) { + .ifnum =QUIRK_ANY_INTERFACE , + .type =QUIRK_COMPOSITE , + .data = (const struct snd_usb_audio_quirk []) { + { + .ifnum =0 , + .type =QUIRK_AUDIO_STANDARD_MIXER , + }, +/* Capture */ + { + .ifnum =1 , + .type =QUIRK_IGNORE_INTERFACE , + }, +/* Playback */ + { + .ifnum =2 , + .type =QUIRK_AUDIO_FIXED_ENDPOINT , + .data = &(const struct audioformat ) { + .formats =SNDRV_PCM_FMTBIT_S16_LE , + .channels =2 , + .iface =2 , + .altsetting =1 , + .altset_idx =1 , + .attributes =UAC_EP_CS_ATTR_FILL_MAX | +UAC_EP_CS_ATTR_SAMPLE_RATE , + .endpoint =0x03 , + .ep_attr =USB_ENDPOINT_XFER_ISOC , + .rates =SNDRV_PCM_RATE_48000 , + .rate_min =48000 , + .rate_max =48000 , + .nr_rates =1 , + .rate_table = (unsigned int []) { +48000 + } + } + }, + } + } +}, + #undef USB_DEVICE_VENDOR_SPEC
Signature · 1 line
2.11.0
Quoted 7 lines · On Fri, 23 Feb 2018 13:06:52 +0100, [email protected] wrote:
From: Erik Veijola <[email protected]>
The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates.
Signed-off-by Erik Veijola <[email protected]>
Applied now (with Cc to stable). Thanks.
Takashi