Aspect ratio support in DRM layer
Subsystems (2)
v5 cover Aspect ratio support in DRM layer
From: Ankit Nautiyal <[email protected]>
This patch series is a re-attempt to enable aspect ratio support in DRM layer. Currently the aspect ratio information gets lost in translation during a user->kernel mode or vice versa.
The old patch series (https://pw-emeril.freedesktop.org/series/10850/) had 4 patches, out of which 2 patches were reverted due to lack of drm client protection while loading the aspect information.
This patch series also includes 3 patches from Ville Syrjälä's series for 'Info-frame cleanup and fixes' https://patchwork.freedesktop.org/series/33730/
which fixes the mode matching mechanism via flags.
This patch series, adds a DRM client option for aspect ratio, and loads aspect ratio flags, only when the client sets this cap.
To test this patch, the testdiplay IGT test is modified to have an option to do a modeset with only aspect ratio modes.
https://patchwork.freedesktop.org/series/37033/
Also, there is a userspace implementation in Wayland/weston layer:
https://patchwork.freedesktop.org/patch/188125/
(Which is already ACK'ed by wayland community.)
This, helps us in passing HDMI compliance test cases like 7-27, where the test equipment applies a CEA mode, and expects the exact VIC in the AVI infoframes.
Ankit Nautiyal (4):
drm: Add DRM client cap for aspect-ratio
drm: Handle aspect-ratio info in getblob
drm: Handle aspect ratio info in legacy and atomic modeset paths
drm: Expose modes with aspect ratio, only if requested
Sharma, Shashank (2):
drm: Add aspect ratio parsing in DRM layer
drm: Add and handle new aspect ratios in DRM layer
Ville Syrjälä (3):
drm/modes: Introduce drm_mode_match()
drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy drm/edid: Fix cea mode aspect ratio handling
drivers/gpu/drm/drm_atomic.c | 31 +++++-- drivers/gpu/drm/drm_atomic_helper.c | 6 +- drivers/gpu/drm/drm_connector.c | 45 ++++++++- drivers/gpu/drm/drm_crtc.c | 15 +++ drivers/gpu/drm/drm_crtc_internal.h | 3 +- drivers/gpu/drm/drm_edid.c | 18 +++- drivers/gpu/drm/drm_ioctl.c | 5 + drivers/gpu/drm/drm_mode_object.c | 9 +- drivers/gpu/drm/drm_modes.c | 178 +++++++++++++++++++++++++++++------- drivers/gpu/drm/drm_property.c | 6 ++ include/drm/drm_atomic.h | 5 +- include/drm/drm_file.h | 8 ++ include/drm/drm_modes.h | 9 ++ include/drm/drm_property.h | 2 + include/uapi/drm/drm.h | 7 ++ include/uapi/drm/drm_mode.h | 6 ++ 16 files changed, 296 insertions(+), 57 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 1/9 drm/modes: Introduce drm_mode_match()
From: Ville Syrjälä <[email protected]>
Make mode matching less confusing by allowing the caller to specify which parts of the modes should match via some flags.
--- drivers/gpu/drm/drm_modes.c | 134 ++++++++++++++++++++++++++++++++++---------- include/drm/drm_modes.h | 9 +++ 2 files changed, 112 insertions(+), 31 deletions(-)
drivers/gpu/drm/drm_modes.c +103 -31
@@ -940,17 +940,68 @@ struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, }EXPORT_SYMBOL (drm_mode_duplicate); +static bool drm_mode_match_timings (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2) +{ +return mode1->hdisplay == mode2->hdisplay && + mode1->hsync_start == mode2->hsync_start && + mode1->hsync_end == mode2->hsync_end && + mode1->htotal == mode2->htotal && + mode1->hskew == mode2->hskew && + mode1->vdisplay == mode2->vdisplay && + mode1->vsync_start == mode2->vsync_start && + mode1->vsync_end == mode2->vsync_end && + mode1->vtotal == mode2->vtotal && + mode1->vscan == mode2->vscan; +} + +static bool drm_mode_match_clock (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2) +{ +/* +* do clock check convert to PICOS +* so fb modes get matched the same +*/ +if (mode1->clock && mode2->clock) +return KHZ2PICOS (mode1->clock) ==KHZ2PICOS (mode2->clock); +else +return mode1->clock == mode2->clock; +} + +static bool drm_mode_match_flags (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2) +{ +return (mode1->flags & ~DRM_MODE_FLAG_3D_MASK ) == + (mode2->flags & ~DRM_MODE_FLAG_3D_MASK ); +} + +static bool drm_mode_match_3d_flags (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2) +{ +return (mode1->flags &DRM_MODE_FLAG_3D_MASK ) == + (mode2->flags &DRM_MODE_FLAG_3D_MASK ); +} + +static bool drm_mode_match_aspect_ratio (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2) +{ +return mode1->picture_aspect_ratio == mode2->picture_aspect_ratio; +} +/** -* drm_mode_equal - test modes for equality +* drm_mode_match - test modes for (partial) equality * @mode1: first mode * @mode2: second mode +* @match_flags: which parts need to match (DRM_MODE_MATCH_*) * * Check to see if @mode1 and @mode2 are equivalent. * * Returns: -* True if the modes are equal, false otherwise. +* True if the modes are (partially) equal, false otherwise. */ -bool drm_mode_equal (const struct drm_display_mode *mode1,const struct drm_display_mode *mode2) +bool drm_mode_match (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2, +unsigned int match_flags) {if (!mode1 && !mode2)return true;
@@ -958,15 +1009,48 @@ bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_displif (!mode1 || !mode2)return false; -/* do clock check convert to PICOS so fb modes get matched -* the same */ -if (mode1->clock && mode2->clock) { -if (KHZ2PICOS (mode1->clock) !=KHZ2PICOS (mode2->clock)) -return false; - }else if (mode1->clock != mode2->clock) +if (match_flags &DRM_MODE_MATCH_TIMINGS && + !drm_mode_match_timings (mode1, mode2)) +return false; + +if (match_flags &DRM_MODE_MATCH_CLOCK && + !drm_mode_match_clock (mode1, mode2)) +return false; + +if (match_flags &DRM_MODE_MATCH_FLAGS && + !drm_mode_match_flags (mode1, mode2)) +return false; + +if (match_flags &DRM_MODE_MATCH_3D_FLAGS && + !drm_mode_match_3d_flags (mode1, mode2))return false; -return drm_mode_equal_no_clocks (mode1, mode2); +if (match_flags &DRM_MODE_MATCH_ASPECT_RATIO && + !drm_mode_match_aspect_ratio (mode1, mode2)) +return false; + +return true; +} +EXPORT_SYMBOL (drm_mode_match); + +/** +* drm_mode_equal - test modes for equality +* @mode1: first mode +* @mode2: second mode +* +* Check to see if @mode1 and @mode2 are equivalent. +* +* Returns: +* True if the modes are equal, false otherwise. +*/ +bool drm_mode_equal (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2) +{ +return drm_mode_match (mode1, mode2, +DRM_MODE_MATCH_TIMINGS | +DRM_MODE_MATCH_CLOCK | +DRM_MODE_MATCH_FLAGS | +DRM_MODE_MATCH_3D_FLAGS ); }EXPORT_SYMBOL (drm_mode_equal);
@@ -981,13 +1065,13 @@ EXPORT_SYMBOL(drm_mode_equal);* Returns: * True if the modes are equal, false otherwise. */ -bool drm_mode_equal_no_clocks (const struct drm_display_mode *mode1,const struct drm_display_mode *mode2) +bool drm_mode_equal_no_clocks (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2) { -if ((mode1->flags &DRM_MODE_FLAG_3D_MASK ) != - (mode2->flags &DRM_MODE_FLAG_3D_MASK )) -return false; - -return drm_mode_equal_no_clocks_no_stereo (mode1, mode2); +return drm_mode_match (mode1, mode2, +DRM_MODE_MATCH_TIMINGS | +DRM_MODE_MATCH_FLAGS | +DRM_MODE_MATCH_3D_FLAGS ); }EXPORT_SYMBOL (drm_mode_equal_no_clocks);
@@ -1005,21 +1089,9 @@ EXPORT_SYMBOL(drm_mode_equal_no_clocks);bool drm_mode_equal_no_clocks_no_stereo (const struct drm_display_mode *mode1,const struct drm_display_mode *mode2) { -if (mode1->hdisplay == mode2->hdisplay && - mode1->hsync_start == mode2->hsync_start && - mode1->hsync_end == mode2->hsync_end && - mode1->htotal == mode2->htotal && - mode1->hskew == mode2->hskew && - mode1->vdisplay == mode2->vdisplay && - mode1->vsync_start == mode2->vsync_start && - mode1->vsync_end == mode2->vsync_end && - mode1->vtotal == mode2->vtotal && - mode1->vscan == mode2->vscan && - (mode1->flags & ~DRM_MODE_FLAG_3D_MASK ) == - (mode2->flags & ~DRM_MODE_FLAG_3D_MASK )) -return true; - -return false; +return drm_mode_match (mode1, mode2, +DRM_MODE_MATCH_TIMINGS | +DRM_MODE_MATCH_FLAGS ); }EXPORT_SYMBOL (drm_mode_equal_no_clocks_no_stereo);
include/drm/drm_modes.h +9 -0
@@ -147,6 +147,12 @@ enum drm_mode_status {#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF +#define DRM_MODE_MATCH_TIMINGS (1 << 0) +#define DRM_MODE_MATCH_CLOCK (1 << 1) +#define DRM_MODE_MATCH_FLAGS (1 << 2) +#define DRM_MODE_MATCH_3D_FLAGS (1 << 3) +#define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4) +/** * struct drm_display_mode - DRM kernel-internal display mode structure * @hdisplay: horizontal display size
@@ -490,6 +496,9 @@ void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src);struct drm_display_mode *drm_mode_duplicate (struct drm_device *dev,const struct drm_display_mode *mode); +bool drm_mode_match (const struct drm_display_mode *mode1, +const struct drm_display_mode *mode2, +unsigned int match_flags);bool drm_mode_equal (const struct drm_display_mode *mode1,const struct drm_display_mode *mode2); bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 2/9 drm/edid: Use drm_mode_match_no_clocks_no_stereo() for consistentcy
In reply to Nautiyal, Ankit KFrom: Ville Syrjälä <[email protected]>
Use drm_mode_equal_no_clocks_no_stereo() in drm_match_hdmi_mode_clock_tolerance() for consistency as we also use it in drm_match_hdmi_mode() and the cea mode matching functions.
This doesn't actually change anything since the input mode comes from detailed timings and we match it against edid_4k_modes[] which. So none of those modes can have stereo flags set.
--- drivers/gpu/drm/drm_edid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/drm_edid.c +1 -1
@@ -3025,7 +3025,7 @@ static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_ abs(to_match->clock - clock2) > clock_tolerance) continue; -if (drm_mode_equal_no_clocks (to_match, hdmi_mode)) +if (drm_mode_equal_no_clocks_no_stereo (to_match, hdmi_mode))return vic; }
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 3/9 drm/edid: Fix cea mode aspect ratio handling
In reply to Nautiyal, Ankit KFrom: Ville Syrjälä <[email protected]>
commit 6dffd431e229 ("drm: Add aspect ratio parsing in DRM layer") cause us to not send out any VICs in the AVI infoframes. That commit was since reverted, but if and when we add aspect ratio handing back we need to be more careful.
Let's handle this by considering the aspect ratio as a requirement for cea mode matching only if the passed in mode actually has a non-zero aspect ratio field. This will keep userspace that doesn't provide an aspect ratio working as before by matching it to the first otherwise equal cea mode. And once userspace starts to provide the aspect ratio it will be considerd a hard requirement for the match.
Also change the hdmi mode matching to use drm_mode_match() for consistency, but we don't match on aspect ratio there since the spec doesn't list a specific aspect ratio for those modes.
--- drivers/gpu/drm/drm_edid.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_edid.c +14 -4
@@ -2908,11 +2908,15 @@ cea_mode_alternate_timings(u8 vic, struct drm_display_mode *mode)static u8 drm_match_cea_mode_clock_tolerance (const struct drm_display_mode *to_match,unsigned int clock_tolerance) { +unsigned int match_flags =DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_FLAGS ;u8 vic;if (!to_match->clock)return 0 ; +if (to_match->picture_aspect_ratio) + match_flags |=DRM_MODE_MATCH_ASPECT_RATIO ; +for (vic =1 ; vic <ARRAY_SIZE (edid_cea_modes); vic++) {struct drm_display_mode cea_mode = edid_cea_modes[vic];unsigned int clock1, clock2;
@@ -2926,7 +2930,7 @@ static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_mcontinue ;do { -if (drm_mode_equal_no_clocks_no_stereo (to_match, &cea_mode)) +if (drm_mode_match (to_match, &cea_mode, match_flags))return vic; }while (cea_mode_alternate_timings (vic, &cea_mode)); }
@@ -2943,11 +2947,15 @@ static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_m*/ u8 drm_match_cea_mode (const struct drm_display_mode *to_match) { +unsigned int match_flags =DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_FLAGS ;u8 vic;if (!to_match->clock)return 0 ; +if (to_match->picture_aspect_ratio) + match_flags |=DRM_MODE_MATCH_ASPECT_RATIO ; +for (vic =1 ; vic <ARRAY_SIZE (edid_cea_modes); vic++) {struct drm_display_mode cea_mode = edid_cea_modes[vic];unsigned int clock1, clock2;
@@ -2961,7 +2969,7 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)continue ;do { -if (drm_mode_equal_no_clocks_no_stereo (to_match, &cea_mode)) +if (drm_mode_match (to_match, &cea_mode, match_flags))return vic; }while (cea_mode_alternate_timings (vic, &cea_mode)); }
@@ -3008,6 +3016,7 @@ hdmi_mode_alternate_clock(const struct drm_display_mode *hdmi_mode)static u8 drm_match_hdmi_mode_clock_tolerance (const struct drm_display_mode *to_match,unsigned int clock_tolerance) { +unsigned int match_flags =DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_FLAGS ;u8 vic;if (!to_match->clock)
@@ -3025,7 +3034,7 @@ static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_ abs(to_match->clock - clock2) > clock_tolerance) continue; -if (drm_mode_equal_no_clocks_no_stereo (to_match, hdmi_mode)) +if (drm_mode_match (to_match, hdmi_mode, match_flags))return vic; }
@@ -3042,6 +3051,7 @@ static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_*/ static u8 drm_match_hdmi_mode (const struct drm_display_mode *to_match) { +unsigned int match_flags =DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_FLAGS ;u8 vic;if (!to_match->clock)
@@ -3057,7 +3067,7 @@ static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match)if ((KHZ2PICOS (to_match->clock) ==KHZ2PICOS (clock1) ||KHZ2PICOS (to_match->clock) ==KHZ2PICOS (clock2)) && -drm_mode_equal_no_clocks_no_stereo (to_match, hdmi_mode)) +drm_mode_match (to_match, hdmi_mode, match_flags))return vic; }return 0 ;
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 4/9 drm: Add DRM client cap for aspect-ratio
In reply to Nautiyal, Ankit KFrom: Ankit Nautiyal <[email protected]>
To enable aspect-ratio support in DRM, blindly exposing the aspect ratio information along with mode, can break things in existing user-spaces which have no intention or support to use this aspect ratio information.
To avoid this, a new drm client cap is required to enable a user-space to advertise if it supports modes with aspect-ratio. Based on this cap value, the kernel will take a call on exposing the aspect ratio info in modes or not.
This patch adds the client cap for aspect-ratio.
V3: rebase
V4: As suggested by Marteen Lankhorst modified the commit message
explaining the need to use the DRM cap for aspect-ratio. Also, tweaked the comment lines in the code for better understanding and clarity, as recommended by Shashank Sharma.
V5: rebase
--- drivers/gpu/drm/drm_ioctl.c | 5 +++++ include/drm/drm_file.h | 8 ++++++++ include/uapi/drm/drm.h | 7 +++++++ 3 files changed, 20 insertions(+)
drivers/gpu/drm/drm_ioctl.c +5 -0
@@ -325,6 +325,11 @@ drm_setclientcap(struct drm_device *dev, void *data, struct drm_file *file_priv) file_priv->atomic = req->value; file_priv->universal_planes = req->value;break ; +case DRM_CLIENT_CAP_ASPECT_RATIO : +if (req->value >1 ) +return -EINVAL ; + file_priv->aspect_ratio_allowed = req->value; +break ;default :return -EINVAL ; }
include/drm/drm_file.h +8 -0
@@ -182,6 +182,14 @@ struct drm_file { unsigned atomic:1;/** +* @aspect_ratio_allowed: +* +* True, if client can handle picture aspect ratios, and has requested +* to pass this information along with the mode. +*/ + unsigned aspect_ratio_allowed:1; + +/** * @is_master: * * This client is the creator of @master. Protected by struct
include/uapi/drm/drm.h +7 -0
@@ -680,6 +680,13 @@ struct drm_get_cap {*/ #define DRM_CLIENT_CAP_ATOMIC 3 +/** +* DRM_CLIENT_CAP_ASPECT_RATIO +* +* If set to 1, the DRM core will provide aspect ratio information in modes. +*/ +#define DRM_CLIENT_CAP_ASPECT_RATIO 4 +/** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */ struct drm_set_client_cap {__u64 capability;
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 5/9 drm: Handle aspect-ratio info in getblob
In reply to Nautiyal, Ankit KFrom: Ankit Nautiyal <[email protected]>
If the user space does not support aspect-ratio, then getblob called with the blob id of a user mode, should clear the aspect ratio information in the blob data.
Currently for a given blob id, there is no way to determine if the blob stores user mode or not. This can only be ascertained when the blob is used for an atomic modeset call.
This patch:
-adds a new field 'is_video_mode' in drm_property_blob to
differentiate between the video mode blobs and the other blobs.
-sets the field 'is_video_mode' when the blob is used for modeset. -removes the aspect-ratio info from the mode data if aspect ratio is
not supported by the user, while returning the blob to the user, in getblob ioctl.
--- drivers/gpu/drm/drm_atomic.c | 1 + drivers/gpu/drm/drm_property.c | 6 ++++++ include/drm/drm_property.h | 2 ++ 3 files changed, 9 insertions(+)
drivers/gpu/drm/drm_atomic.c +1 -0
@@ -464,6 +464,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc,else if (property == config->prop_mode_id) {struct drm_property_blob *mode =drm_property_lookup_blob (dev, val); + mode->is_video_mode = true; ret =drm_atomic_set_mode_prop_for_crtc (state, mode);drm_property_blob_put (mode);return ret;
drivers/gpu/drm/drm_property.c +6 -0
@@ -746,6 +746,12 @@ int drm_mode_getblob_ioctl(struct drm_device *dev,if (!blob)return -ENOENT ; +if (blob->is_video_mode && !file_priv->aspect_ratio_allowed) { +struct drm_mode_modeinfo *mode = + (struct drm_mode_modeinfo *) blob->data; + mode->flags &= (~DRM_MODE_FLAG_PIC_AR_MASK ); + } +if (out_resp->length == blob->length) { if (copy_to_user(u64_to_user_ptr(out_resp->data), blob->data,
include/drm/drm_property.h +2 -0
@@ -194,6 +194,7 @@ struct drm_property {* @head_global: entry on the global blob list in * &drm_mode_config.property_blob_list. * @head_file: entry on the per-file blob list in &drm_file.blobs list. +* @is_video_mode: flag to mark the blobs that contain drm_mode_modeinfo. * @length: size of the blob in bytes, invariant over the lifetime of the object * @data: actual data, embedded at the end of this structure *
@@ -208,6 +209,7 @@ struct drm_property_blob {struct drm_device *dev;struct list_head head_global;struct list_head head_file; +bool is_video_mode;size_t length;unsigned char data[]; };
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 5/9] drm: Handle aspect-ratio info in getblob
Quoted 42 lines · Ankit K
From: Ankit Nautiyal <[email protected]>
If the user space does not support aspect-ratio, then getblob called with the blob id of a user mode, should clear the aspect ratio information in the blob data.
Currently for a given blob id, there is no way to determine if the blob stores user mode or not. This can only be ascertained when the blob is used for an atomic modeset call.
This patch:
(quoted diff) +0
-3-adds a new field 'is_video_mode' in drm_property_blob to differentiate between the video mode blobs and the other blobs. -sets the field 'is_video_mode' when the blob is used for modeset. -removes the aspect-ratio info from the mode data if aspect ratio is not supported by the user, while returning the blob to the user, in getblob ioctl.Signed-off-by Ankit Nautiyal <[email protected]>--- drivers/gpu/drm/drm_atomic.c | 1 + drivers/gpu/drm/drm_property.c | 6 ++++++ include/drm/drm_property.h | 2 ++ 3 files changed, 9 insertions(+)drivers/gpu/drm/drm_atomic.c +1
-0@@ -464,6 +464,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc,else if (property == config->prop_mode_id) {struct drm_property_blob *mode =drm_property_lookup_blob (dev, val); + mode->is_video_mode = true; ret =drm_atomic_set_mode_prop_for_crtc (state, mode);drm_property_blob_put (mode);return ret;drivers/gpu/drm/drm_property.c +0
-0
drivers/gpu/drm/drm_property.c int drm_mode_getblob_ioctl(struct drm_device *dev, · line 752
Quoted 7 lines
drivers/gpu/drm/drm_property.c +4
-0@@ -746,6 +746,12 @@ int drm_mode_getblob_ioctl(struct drm_device *dev,if (!blob)return -ENOENT ; +if (blob->is_video_mode && !file_priv->aspect_ratio_allowed) { +struct drm_mode_modeinfo *mode = + (struct drm_mode_modeinfo *) blob->data; + mode->flags &= (~DRM_MODE_FLAG_PIC_AR_MASK );
This is still clobbering the internal state. If another client with the aspect ratio cap comes in later and asks for the same blob we can no longer tell it what the aspect ratio was. So I think we have to make a temporary copy of the mode here.
Also pointless parens.
Quoted 27 lines
drivers/gpu/drm/drm_property.c +2
-0+ } +if (out_resp->length == blob->length) { if (copy_to_user(u64_to_user_ptr(out_resp->data), blob->data,include/drm/drm_property.h +2
-0@@ -194,6 +194,7 @@ struct drm_property {* @head_global: entry on the global blob list in * &drm_mode_config.property_blob_list. * @head_file: entry on the per-file blob list in &drm_file.blobs list. +* @is_video_mode: flag to mark the blobs that contain drm_mode_modeinfo. * @length: size of the blob in bytes, invariant over the lifetime of the object * @data: actual data, embedded at the end of this structure * @@ -208,6 +209,7 @@ struct drm_property_blob {struct drm_device *dev;struct list_head head_global;struct list_head head_file; +bool is_video_mode;size_t length;unsigned char data[]; };Signature · 1 line
2.7.4
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 5/9] drm: Handle aspect-ratio info in getblob
Hi Ville,
Thanks for your time for the review and the suggestions.
Please find my comments inline:
Quoted 55 lines · Ville Syrjälä
Quoted 42 lines · Ankit K
From: Ankit Nautiyal <[email protected]>
If the user space does not support aspect-ratio, then getblob called with the blob id of a user mode, should clear the aspect ratio information in the blob data.
Currently for a given blob id, there is no way to determine if the blob stores user mode or not. This can only be ascertained when the blob is used for an atomic modeset call.
This patch:
(quoted diff) +0
-3-adds a new field 'is_video_mode' in drm_property_blob to differentiate between the video mode blobs and the other blobs. -sets the field 'is_video_mode' when the blob is used for modeset. -removes the aspect-ratio info from the mode data if aspect ratio is not supported by the user, while returning the blob to the user, in getblob ioctl.Signed-off-by Ankit Nautiyal <[email protected]>--- drivers/gpu/drm/drm_atomic.c | 1 + drivers/gpu/drm/drm_property.c | 6 ++++++ include/drm/drm_property.h | 2 ++ 3 files changed, 9 insertions(+)drivers/gpu/drm/drm_atomic.c +1
-0@@ -464,6 +464,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc,else if (property == config->prop_mode_id) {struct drm_property_blob *mode =drm_property_lookup_blob (dev, val); + mode->is_video_mode = true; ret =drm_atomic_set_mode_prop_for_crtc (state, mode);drm_property_blob_put (mode);return ret;drivers/gpu/drm/drm_property.c +0
-0drivers/gpu/drm/drm_property.c int drm_mode_getblob_ioctl(struct drm_device *dev, · line 752
Quoted 7 lines
drivers/gpu/drm/drm_property.c +4
-0@@ -746,6 +746,12 @@ int drm_mode_getblob_ioctl(struct drm_device *dev,if (!blob)return -ENOENT ; +if (blob->is_video_mode && !file_priv->aspect_ratio_allowed) { +struct drm_mode_modeinfo *mode = + (struct drm_mode_modeinfo *) blob->data; + mode->flags &= (~DRM_MODE_FLAG_PIC_AR_MASK );This is still clobbering the internal state. If another client with the aspect ratio cap comes in later and asks for the same blob we can no longer tell it what the aspect ratio was. So I think we have to make a temporary copy of the mode here.
Quoted 1 line
Also pointless parens.
Point taken. In that case, will it be alright to just clear the aspect-ratio bits in out_resp->data, that is being sent to the user?
That way, the blob will retain the aspect ratio information.
Also, as per your comments in subsequent patches of the series, I would use a helper function to check, if aspect-ratio info is allowed and for clearing the bits if aspect-ratio info is not allowed.
Regards,
Ankit
Quoted 20 lines
Quoted 20 lines
drivers/gpu/drm/drm_property.c +2
-0+ } +if (out_resp->length == blob->length) { if (copy_to_user(u64_to_user_ptr(out_resp->data), blob->data,include/drm/drm_property.h +1
-0@@ -194,6 +194,7 @@ struct drm_property {* @head_global: entry on the global blob list in * &drm_mode_config.property_blob_list. * @head_file: entry on the per-file blob list in &drm_file.blobs list. +* @is_video_mode: flag to mark the blobs that contain drm_mode_modeinfo. * @length: size of the blob in bytes, invariant over the lifetime of the object * @data: actual data, embedded at the end of this structure * @@ -208,6 +209,7 @@ struct drm_property_blob {struct drm_device *dev;
Quoted 8 lines
Quoted 8 lines
include/drm/drm_property.h +1
-0struct list_head head_global;struct list_head head_file; +bool is_video_mode;size_t length;unsigned char data[]; };Signature · 1 line
2.7.4
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 6/9 drm: Handle aspect ratio info in legacy and atomic modeset paths
In reply to Nautiyal, Ankit KFrom: Ankit Nautiyal <[email protected]>
If the user-space does not support aspect-ratio, and requests for a modeset with mode having aspect ratio bits set, then the given user-mode must be rejected. Secondly, while preparing a user-mode from kernel mode, the aspect-ratio info must not be given, if aspect-ratio is not supported by the user.
This patch:
1. passes the file_priv structure from the drm_mode_atomic_ioctl till the drm_mode_crtc_set_mode_prop, to get the user capability.
2. rejects the modes with aspect-ratio info, during modeset, if the user does not support aspect ratio.
3. does not load the aspect-ratio info in user-mode structure, if aspect ratio is not supported.
V3: Addressed review comments from Ville:
Do not corrupt the current crtc state by updating aspect ratio on the fly.
V4: rebase
V5: As suggested by Ville, rejected the modeset calls for modes with
aspect ratio, if the user does not set aspect ratio cap.
--- drivers/gpu/drm/drm_atomic.c | 30 ++++++++++++++++++++++-------- drivers/gpu/drm/drm_atomic_helper.c | 6 +++--- drivers/gpu/drm/drm_crtc.c | 15 +++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 3 ++- drivers/gpu/drm/drm_mode_object.c | 9 ++++++--- drivers/gpu/drm/drm_modes.c | 1 + include/drm/drm_atomic.h | 5 +++-- 7 files changed, 52 insertions(+), 17 deletions(-)
drivers/gpu/drm/drm_atomic.c +22 -8
@@ -368,6 +368,7 @@ EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc);* drm_atomic_set_mode_prop_for_crtc - set mode for CRTC * @state: the CRTC whose incoming state to update * @blob: pointer to blob property to use for mode +* @file_priv: file priv structure, to get the userspace capabilities * * Set a mode (originating from a blob property) on the desired CRTC state. * This function will take a reference on the blob property for the CRTC state,
@@ -378,7 +379,8 @@ EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc);* Zero on success, error code on failure. Cannot return -EDEADLK. */ int drm_atomic_set_mode_prop_for_crtc (struct drm_crtc_state *state, -struct drm_property_blob *blob) +struct drm_property_blob *blob, +struct drm_file *file_priv) {if (blob == state->mode_blob)return 0 ;
@@ -389,10 +391,20 @@ int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,memset (&state->mode,0 ,sizeof (state->mode));if (blob) { +struct drm_mode_modeinfo *u_mode; + + u_mode = (struct drm_mode_modeinfo *) blob->data; +if (!file_priv->aspect_ratio_allowed && + (u_mode->flags &DRM_MODE_FLAG_PIC_AR_MASK ) != +DRM_MODE_FLAG_PIC_AR_NONE ) { +DRM_DEBUG_ATOMIC ("Unexpected aspect-ratio flag bits\n" ); +return -EINVAL ; + } +if (blob->length !=sizeof (struct drm_mode_modeinfo ) ||drm_mode_convert_umode (state->crtc->dev, &state->mode, - (const struct drm_mode_modeinfo *) - blob->data)) + (const struct drm_mode_modeinfo *) + u_mode))return -EINVAL ; state->mode_blob =drm_property_blob_get (blob);
@@ -441,6 +453,7 @@ drm_atomic_replace_property_blob_from_id(struct drm_device *dev,* @state: the state object to update with the new property value * @property: the property to set * @val: the new property value +* @file_priv: the file private structure, to get the user capabilities * * This function handles generic/core properties and calls out to driver's * &drm_crtc_funcs.atomic_set_property for driver properties. To ensure
@@ -452,7 +465,7 @@ drm_atomic_replace_property_blob_from_id(struct drm_device *dev,*/ int drm_atomic_crtc_set_property (struct drm_crtc *crtc,struct drm_crtc_state *state,struct drm_property *property, -uint64_t val) +uint64_t val,struct drm_file *file_priv) {struct drm_device *dev = crtc->dev;struct drm_mode_config *config = &dev->mode_config;
@@ -465,7 +478,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc,struct drm_property_blob *mode =drm_property_lookup_blob (dev, val); mode->is_video_mode = true; - ret =drm_atomic_set_mode_prop_for_crtc (state, mode); + ret =drm_atomic_set_mode_prop_for_crtc (state, mode, file_priv);drm_property_blob_put (mode);return ret; }else if (property == config->degamma_lut_property) {
@@ -1918,7 +1931,8 @@ int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state,int drm_atomic_set_property (struct drm_atomic_state *state,struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value) +uint64_t prop_value, +struct drm_file *file_priv) {struct drm_mode_object *ref;int ret;
@@ -1952,7 +1966,7 @@ int drm_atomic_set_property(struct drm_atomic_state *state, } ret =drm_atomic_crtc_set_property (crtc, - crtc_state, prop, prop_value); + crtc_state, prop, prop_value, file_priv);break ; }case DRM_MODE_OBJECT_PLANE : {
@@ -2341,7 +2355,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, } ret =drm_atomic_set_property (state, obj, prop, - prop_value); + prop_value, file_priv);if (ret) {drm_mode_object_put (obj); goto out;
drivers/gpu/drm/drm_atomic_helper.c +3 -3
@@ -186,7 +186,7 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,if (!crtc_state->connector_mask) { ret =drm_atomic_set_mode_prop_for_crtc (crtc_state, -NULL ); +NULL ,NULL );if (ret <0 ) goto out;
@@ -2749,7 +2749,7 @@ static int update_output_state(struct drm_atomic_state *state,if (!new_crtc_state->connector_mask) { ret =drm_atomic_set_mode_prop_for_crtc (new_crtc_state, -NULL ); +NULL ,NULL );if (ret <0 )return ret;
@@ -2930,7 +2930,7 @@ int drm_atomic_helper_disable_all(struct drm_device *dev, crtc_state->active = false; - ret =drm_atomic_set_mode_prop_for_crtc (crtc_state,NULL ); + ret =drm_atomic_set_mode_prop_for_crtc (crtc_state,NULL ,NULL );if (ret <0 ) goto free;
drivers/gpu/drm/drm_crtc.c +15 -0
@@ -430,6 +430,9 @@ int drm_mode_getcrtc(struct drm_device *dev,if (crtc->state) {if (crtc->state->enable) {drm_mode_convert_to_umode (&crtc_resp->mode, &crtc->state->mode); +if (!file_priv->aspect_ratio_allowed) + crtc->state->mode.flags &= + (~DRM_MODE_FLAG_PIC_AR_MASK ); crtc_resp->mode_valid =1 ; }else {
@@ -440,6 +443,9 @@ int drm_mode_getcrtc(struct drm_device *dev, crtc_resp->y = crtc->y;if (crtc->enabled) {drm_mode_convert_to_umode (&crtc_resp->mode, &crtc->mode); +if (!file_priv->aspect_ratio_allowed) + crtc->mode.flags &= + (~DRM_MODE_FLAG_PIC_AR_MASK ); crtc_resp->mode_valid =1 ; }else {
@@ -614,6 +620,15 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } +if (!file_priv->aspect_ratio_allowed && + (crtc_req->mode.flags &DRM_MODE_FLAG_PIC_AR_MASK ) != +DRM_MODE_FLAG_PIC_AR_NONE ) { +DRM_DEBUG_KMS ("Unexpected aspect-ratio flag bits\n" ); + ret = -EINVAL ; + goto out; + } + + ret =drm_mode_convert_umode (dev, mode, &crtc_req->mode);if (ret) {DRM_DEBUG_KMS ("Invalid mode\n" );
drivers/gpu/drm/drm_crtc_internal.h +2 -1
@@ -186,7 +186,8 @@ int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state,int drm_atomic_set_property (struct drm_atomic_state *state,struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value); +uint64_t prop_value, +struct drm_file *file_priv);int drm_atomic_get_property (struct drm_mode_object *obj,struct drm_property *property,uint64_t *val); int drm_mode_atomic_ioctl(struct drm_device *dev,
drivers/gpu/drm/drm_mode_object.c +6 -3
@@ -452,7 +452,8 @@ static int set_property_legacy(struct drm_mode_object *obj,static int set_property_atomic (struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value) +uint64_t prop_value, +struct drm_file *file_priv) {struct drm_device *dev = prop->dev;struct drm_atomic_state *state;
@@ -476,7 +477,8 @@ static int set_property_atomic(struct drm_mode_object *obj,obj_to_connector (obj), prop_value); }else { - ret =drm_atomic_set_property (state, obj, prop, prop_value); + ret =drm_atomic_set_property (state, obj, prop, prop_value, + file_priv);if (ret) goto out; ret =drm_atomic_commit (state);
@@ -519,7 +521,8 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, goto out_unref;if (drm_drv_uses_atomic_modeset (property->dev)) - ret =set_property_atomic (arg_obj, property, arg->value); + ret =set_property_atomic (arg_obj, property, arg->value, + file_priv);else ret =set_property_legacy (arg_obj, property, arg->value);
drivers/gpu/drm/drm_modes.c +1 -0
@@ -1620,6 +1620,7 @@ EXPORT_SYMBOL(drm_mode_create_from_cmdline_mode);* drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo * @out: drm_mode_modeinfo struct to return to the user * @in: drm_display_mode to use +* @file_priv: file_priv structure, to get the user capabilities * * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to * the user.
include/drm/drm_atomic.h +3 -2
@@ -367,7 +367,7 @@ drm_atomic_get_crtc_state(struct drm_atomic_state *state, struct drm_crtc *crtc);int drm_atomic_crtc_set_property (struct drm_crtc *crtc,struct drm_crtc_state *state,struct drm_property *property, -uint64_t val); +uint64_t val,struct drm_file *file_priv);struct drm_plane_state *__must_check drm_atomic_get_plane_state (struct drm_atomic_state *state,struct drm_plane *plane);
@@ -583,7 +583,8 @@ drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state, const struct drm_display_mode *mode);int __must_check drm_atomic_set_mode_prop_for_crtc (struct drm_crtc_state *state, -struct drm_property_blob *blob); +struct drm_property_blob *blob, +struct drm_file *file_priv);int __must_check drm_atomic_set_crtc_for_plane (struct drm_plane_state *plane_state,struct drm_crtc *crtc);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 6/9] drm: Handle aspect ratio info in legacy and atomic modeset paths
Quoted 59 lines · Ankit K
From: Ankit Nautiyal <[email protected]>
If the user-space does not support aspect-ratio, and requests for a modeset with mode having aspect ratio bits set, then the given user-mode must be rejected. Secondly, while preparing a user-mode from kernel mode, the aspect-ratio info must not be given, if aspect-ratio is not supported by the user.
This patch:
1. passes thefile_privstructure from thedrm_mode_atomic_ioctltill thedrm_mode_crtc_set_mode_prop, to get the user capability.
2. rejects the modes with aspect-ratio info, during modeset, if the user does not support aspect ratio.
3. does not load the aspect-ratio info in user-mode structure, if aspect ratio is not supported.Signed-off-by Ankit Nautiyal <[email protected]>V3: Addressed review comments from Ville:
Do not corrupt the current crtc state by updating aspect ratio on the fly.
V4: rebase
V5: As suggested by Ville, rejected the modeset calls for modes with
aspect ratio, if the user does not set aspect ratio cap.--- drivers/gpu/drm/drm_atomic.c | 30 ++++++++++++++++++++++-------- drivers/gpu/drm/drm_atomic_helper.c | 6 +++--- drivers/gpu/drm/drm_crtc.c | 15 +++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 3 ++- drivers/gpu/drm/drm_mode_object.c | 9 ++++++--- drivers/gpu/drm/drm_modes.c | 1 + include/drm/drm_atomic.h | 5 +++-- 7 files changed, 52 insertions(+), 17 deletions(-)drivers/gpu/drm/drm_atomic.c +3
-1@@ -368,6 +368,7 @@ EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc);* drm_atomic_set_mode_prop_for_crtc - set mode for CRTC * @state: the CRTC whose incoming state to update * @blob: pointer to blob property to use for mode +* @file_priv: file priv structure, to get the userspace capabilities * * Set a mode (originating from a blob property) on the desired CRTC state. * This function will take a reference on the blob property for the CRTC state, @@ -378,7 +379,8 @@ EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc);* Zero on success, error code on failure. Cannot return -EDEADLK. */ int drm_atomic_set_mode_prop_for_crtc (struct drm_crtc_state *state, -struct drm_property_blob *blob) +struct drm_property_blob *blob, +struct drm_file *file_priv) {if (blob == state->mode_blob)return 0 ;@@ -389,10 +391,20 @@ int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,memset (&state->mode,0 ,sizeof (state->mode));
drivers/gpu/drm/drm_atomic.c int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state, · line 402
Quoted 10 lines
drivers/gpu/drm/drm_atomic.c +9
-0if (blob) { +struct drm_mode_modeinfo *u_mode; + + u_mode = (struct drm_mode_modeinfo *) blob->data; +if (!file_priv->aspect_ratio_allowed && + (u_mode->flags &DRM_MODE_FLAG_PIC_AR_MASK ) != +DRM_MODE_FLAG_PIC_AR_NONE ) { +DRM_DEBUG_ATOMIC ("Unexpected aspect-ratio flag bits\n" ); +return -EINVAL ; + }
We should probably pull this logic into a small helper so that we don't have to duplicate it in both the setprop and setcrtc code paths.
drivers/gpu/drm/drm_atomic.c int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state, · line 404
Quoted 2 lines
drivers/gpu/drm/drm_atomic.c +1
-0+ if (blob->length != sizeof(struct drm_mode_modeinfo) ||
The blob length check has to be done before you access the data.
Quoted 98 lines
drivers/gpu/drm/drm_atomic.c +9
-7drm_mode_convert_umode (state->crtc->dev, &state->mode, - (const struct drm_mode_modeinfo *) - blob->data)) + (const struct drm_mode_modeinfo *) + u_mode)) return -EINVAL; state->mode_blob =drm_property_blob_get (blob);@@ -441,6 +453,7 @@ drm_atomic_replace_property_blob_from_id(struct drm_device *dev,* @state: the state object to update with the new property value * @property: the property to set * @val: the new property value +* @file_priv: the file private structure, to get the user capabilities * * This function handles generic/core properties and calls out to driver's * &drm_crtc_funcs.atomic_set_property for driver properties. To ensure @@ -452,7 +465,7 @@ drm_atomic_replace_property_blob_from_id(struct drm_device *dev,*/ int drm_atomic_crtc_set_property (struct drm_crtc *crtc,struct drm_crtc_state *state,struct drm_property *property, -uint64_t val) +uint64_t val,struct drm_file *file_priv) {struct drm_device *dev = crtc->dev;struct drm_mode_config *config = &dev->mode_config;@@ -465,7 +478,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc,struct drm_property_blob *mode =drm_property_lookup_blob (dev, val); mode->is_video_mode = true; - ret =drm_atomic_set_mode_prop_for_crtc (state, mode); + ret =drm_atomic_set_mode_prop_for_crtc (state, mode, file_priv);drm_property_blob_put (mode);return ret; }else if (property == config->degamma_lut_property) {@@ -1918,7 +1931,8 @@ int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state,int drm_atomic_set_property (struct drm_atomic_state *state,struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value) +uint64_t prop_value, +struct drm_file *file_priv) {struct drm_mode_object *ref;int ret;@@ -1952,7 +1966,7 @@ int drm_atomic_set_property(struct drm_atomic_state *state, } ret =drm_atomic_crtc_set_property (crtc, - crtc_state, prop, prop_value); + crtc_state, prop, prop_value, file_priv);break ; }case DRM_MODE_OBJECT_PLANE : {@@ -2341,7 +2355,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, } ret =drm_atomic_set_property (state, obj, prop, - prop_value); + prop_value, file_priv);if (ret) {drm_mode_object_put (obj); goto out;drivers/gpu/drm/drm_atomic_helper.c +3
-3@@ -186,7 +186,7 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,if (!crtc_state->connector_mask) { ret =drm_atomic_set_mode_prop_for_crtc (crtc_state, -NULL ); +NULL ,NULL );if (ret <0 ) goto out;@@ -2749,7 +2749,7 @@ static int update_output_state(struct drm_atomic_state *state,if (!new_crtc_state->connector_mask) { ret =drm_atomic_set_mode_prop_for_crtc (new_crtc_state, -NULL ); +NULL ,NULL );if (ret <0 )return ret;@@ -2930,7 +2930,7 @@ int drm_atomic_helper_disable_all(struct drm_device *dev, crtc_state->active = false; - ret =drm_atomic_set_mode_prop_for_crtc (crtc_state,NULL ); + ret =drm_atomic_set_mode_prop_for_crtc (crtc_state,NULL ,NULL );if (ret <0 ) goto free;drivers/gpu/drm/drm_crtc.c +0
-0
drivers/gpu/drm/drm_crtc.c int drm_mode_getcrtc(struct drm_device *dev, · line 435
Quoted 6 lines
drivers/gpu/drm/drm_crtc.c +3
-0@@ -430,6 +430,9 @@ int drm_mode_getcrtc(struct drm_device *dev,if (crtc->state) {if (crtc->state->enable) {drm_mode_convert_to_umode (&crtc_resp->mode, &crtc->state->mode); +if (!file_priv->aspect_ratio_allowed) + crtc->state->mode.flags &= + (~DRM_MODE_FLAG_PIC_AR_MASK );
Should be manling crtc_resp->mode instead of the internal mode.
drivers/gpu/drm/drm_crtc.c int drm_mode_getcrtc(struct drm_device *dev, · line 448
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +3
-0crtc_resp->mode_valid =1 ; }else {@@ -440,6 +443,9 @@ int drm_mode_getcrtc(struct drm_device *dev, crtc_resp->y = crtc->y;if (crtc->enabled) {drm_mode_convert_to_umode (&crtc_resp->mode, &crtc->mode); +if (!file_priv->aspect_ratio_allowed) + crtc->mode.flags &= + (~DRM_MODE_FLAG_PIC_AR_MASK );
ditto
Should probably pull this flag filtering logic into a small helper as well.
Quoted 104 lines
drivers/gpu/drm/drm_crtc.c +9
-0crtc_resp->mode_valid =1 ; }else {@@ -614,6 +620,15 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } +if (!file_priv->aspect_ratio_allowed && + (crtc_req->mode.flags &DRM_MODE_FLAG_PIC_AR_MASK ) != +DRM_MODE_FLAG_PIC_AR_NONE ) { +DRM_DEBUG_KMS ("Unexpected aspect-ratio flag bits\n" ); + ret = -EINVAL ; + goto out; + } + + ret =drm_mode_convert_umode (dev, mode, &crtc_req->mode);if (ret) {DRM_DEBUG_KMS ("Invalid mode\n" );drivers/gpu/drm/drm_crtc_internal.h +2
-1@@ -186,7 +186,8 @@ int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state,int drm_atomic_set_property (struct drm_atomic_state *state,struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value); +uint64_t prop_value, +struct drm_file *file_priv);int drm_atomic_get_property (struct drm_mode_object *obj,struct drm_property *property,uint64_t *val); int drm_mode_atomic_ioctl(struct drm_device *dev,drivers/gpu/drm/drm_mode_object.c +6
-3@@ -452,7 +452,8 @@ static int set_property_legacy(struct drm_mode_object *obj,static int set_property_atomic (struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value) +uint64_t prop_value, +struct drm_file *file_priv) {struct drm_device *dev = prop->dev;struct drm_atomic_state *state;@@ -476,7 +477,8 @@ static int set_property_atomic(struct drm_mode_object *obj,obj_to_connector (obj), prop_value); }else { - ret =drm_atomic_set_property (state, obj, prop, prop_value); + ret =drm_atomic_set_property (state, obj, prop, prop_value, + file_priv);if (ret) goto out; ret =drm_atomic_commit (state);@@ -519,7 +521,8 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, goto out_unref;if (drm_drv_uses_atomic_modeset (property->dev)) - ret =set_property_atomic (arg_obj, property, arg->value); + ret =set_property_atomic (arg_obj, property, arg->value, + file_priv);else ret =set_property_legacy (arg_obj, property, arg->value);drivers/gpu/drm/drm_modes.c +1
-0@@ -1620,6 +1620,7 @@ EXPORT_SYMBOL(drm_mode_create_from_cmdline_mode);* drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo * @out: drm_mode_modeinfo struct to return to the user * @in: drm_display_mode to use +* @file_priv: file_priv structure, to get the user capabilities * * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to * the user. include/drm/drm_atomic.h +3
-2@@ -367,7 +367,7 @@ drm_atomic_get_crtc_state(struct drm_atomic_state *state, struct drm_crtc *crtc);int drm_atomic_crtc_set_property (struct drm_crtc *crtc,struct drm_crtc_state *state,struct drm_property *property, -uint64_t val); +uint64_t val,struct drm_file *file_priv);struct drm_plane_state *__must_check drm_atomic_get_plane_state (struct drm_atomic_state *state,struct drm_plane *plane);@@ -583,7 +583,8 @@ drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state, const struct drm_display_mode *mode);int __must_check drm_atomic_set_mode_prop_for_crtc (struct drm_crtc_state *state, -struct drm_property_blob *blob); +struct drm_property_blob *blob, +struct drm_file *file_priv);int __must_check drm_atomic_set_crtc_for_plane (struct drm_plane_state *plane_state,struct drm_crtc *crtc);Signature · 1 line
2.7.4
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 6/9] drm: Handle aspect ratio info in legacy and atomic modeset paths
Hi Ville,
I agree to all the comments here, and will correct the required things in the next patch-set.
Quoted 60 lines · Ville Syrjälä
Quoted 59 lines · Ankit K
From: Ankit Nautiyal <[email protected]>
If the user-space does not support aspect-ratio, and requests for a modeset with mode having aspect ratio bits set, then the given user-mode must be rejected. Secondly, while preparing a user-mode from kernel mode, the aspect-ratio info must not be given, if aspect-ratio is not supported by the user.
This patch:
1. passes thefile_privstructure from thedrm_mode_atomic_ioctltill thedrm_mode_crtc_set_mode_prop, to get the user capability.
2. rejects the modes with aspect-ratio info, during modeset, if the user does not support aspect ratio.
3. does not load the aspect-ratio info in user-mode structure, if aspect ratio is not supported.Signed-off-by Ankit Nautiyal <[email protected]>V3: Addressed review comments from Ville:
Do not corrupt the current crtc state by updating aspect ratio on the fly.
V4: rebase
V5: As suggested by Ville, rejected the modeset calls for modes with
aspect ratio, if the user does not set aspect ratio cap.--- drivers/gpu/drm/drm_atomic.c | 30 ++++++++++++++++++++++-------- drivers/gpu/drm/drm_atomic_helper.c | 6 +++--- drivers/gpu/drm/drm_crtc.c | 15 +++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 3 ++- drivers/gpu/drm/drm_mode_object.c | 9 ++++++--- drivers/gpu/drm/drm_modes.c | 1 + include/drm/drm_atomic.h | 5 +++-- 7 files changed, 52 insertions(+), 17 deletions(-)drivers/gpu/drm/drm_atomic.c +3
-1@@ -368,6 +368,7 @@ EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc);* drm_atomic_set_mode_prop_for_crtc - set mode for CRTC * @state: the CRTC whose incoming state to update * @blob: pointer to blob property to use for mode +* @file_priv: file priv structure, to get the userspace capabilities * * Set a mode (originating from a blob property) on the desired CRTC state. * This function will take a reference on the blob property for the CRTC state, @@ -378,7 +379,8 @@ EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc);* Zero on success, error code on failure. Cannot return -EDEADLK. */ int drm_atomic_set_mode_prop_for_crtc (struct drm_crtc_state *state, -struct drm_property_blob *blob) +struct drm_property_blob *blob, +struct drm_file *file_priv) {if (blob == state->mode_blob)return 0 ;@@ -389,10 +391,20 @@ int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,memset (&state->mode,0 ,sizeof (state->mode));
Quoted 12 lines
drivers/gpu/drm/drm_atomic.c int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state, · line 402
Quoted 10 lines
drivers/gpu/drm/drm_atomic.c +9
-0if (blob) { +struct drm_mode_modeinfo *u_mode; + + u_mode = (struct drm_mode_modeinfo *) blob->data; +if (!file_priv->aspect_ratio_allowed && + (u_mode->flags &DRM_MODE_FLAG_PIC_AR_MASK ) != +DRM_MODE_FLAG_PIC_AR_NONE ) { +DRM_DEBUG_ATOMIC ("Unexpected aspect-ratio flag bits\n" ); +return -EINVAL ; + }We should probably pull this logic into a small helper so that we don't have to duplicate it in both the setprop and setcrtc code paths.
Agreed. I would add the required helper function, in the next patch-set.
Quoted 4 lines
drivers/gpu/drm/drm_atomic.c int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state, · line 404
Quoted 3 lines
drivers/gpu/drm/drm_atomic.c +1
-0+ if (blob->length != sizeof(struct drm_mode_modeinfo) ||The blob length check has to be done before you access the data.
Right. Will take care in the next patch-set.
Quoted 93 lines
Quoted 93 lines
drivers/gpu/drm/drm_atomic.c +9
-7drm_mode_convert_umode (state->crtc->dev, &state->mode, - (const struct drm_mode_modeinfo *) - blob->data)) + (const struct drm_mode_modeinfo *) + u_mode)) return -EINVAL; state->mode_blob =drm_property_blob_get (blob);@@ -441,6 +453,7 @@ drm_atomic_replace_property_blob_from_id(struct drm_device *dev,* @state: the state object to update with the new property value * @property: the property to set * @val: the new property value +* @file_priv: the file private structure, to get the user capabilities * * This function handles generic/core properties and calls out to driver's * &drm_crtc_funcs.atomic_set_property for driver properties. To ensure @@ -452,7 +465,7 @@ drm_atomic_replace_property_blob_from_id(struct drm_device *dev,*/ int drm_atomic_crtc_set_property (struct drm_crtc *crtc,struct drm_crtc_state *state,struct drm_property *property, -uint64_t val) +uint64_t val,struct drm_file *file_priv) {struct drm_device *dev = crtc->dev;struct drm_mode_config *config = &dev->mode_config;@@ -465,7 +478,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc,struct drm_property_blob *mode =drm_property_lookup_blob (dev, val); mode->is_video_mode = true; - ret =drm_atomic_set_mode_prop_for_crtc (state, mode); + ret =drm_atomic_set_mode_prop_for_crtc (state, mode, file_priv);drm_property_blob_put (mode);return ret; }else if (property == config->degamma_lut_property) {@@ -1918,7 +1931,8 @@ int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state,int drm_atomic_set_property (struct drm_atomic_state *state,struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value) +uint64_t prop_value, +struct drm_file *file_priv) {struct drm_mode_object *ref;int ret;@@ -1952,7 +1966,7 @@ int drm_atomic_set_property(struct drm_atomic_state *state, } ret =drm_atomic_crtc_set_property (crtc, - crtc_state, prop, prop_value); + crtc_state, prop, prop_value, file_priv);break ; }case DRM_MODE_OBJECT_PLANE : {@@ -2341,7 +2355,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, } ret =drm_atomic_set_property (state, obj, prop, - prop_value); + prop_value, file_priv);if (ret) {drm_mode_object_put (obj); goto out;drivers/gpu/drm/drm_atomic_helper.c +3
-3@@ -186,7 +186,7 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,if (!crtc_state->connector_mask) { ret =drm_atomic_set_mode_prop_for_crtc (crtc_state, -NULL ); +NULL ,NULL );if (ret <0 ) goto out;@@ -2749,7 +2749,7 @@ static int update_output_state(struct drm_atomic_state *state,if (!new_crtc_state->connector_mask) { ret =drm_atomic_set_mode_prop_for_crtc (new_crtc_state, -NULL ); +NULL ,NULL );if (ret <0 )return ret;@@ -2930,7 +2930,7 @@ int drm_atomic_helper_disable_all(struct drm_device *dev, crtc_state->active = false; - ret =drm_atomic_set_mode_prop_for_crtc (crtc_state,NULL ); + ret =drm_atomic_set_mode_prop_for_crtc (crtc_state,NULL ,NULL );if (ret <0 ) goto free;
Quoted 12 lines
drivers/gpu/drm/drm_crtc.c int drm_mode_getcrtc(struct drm_device *dev, · line 435
Quoted 11 lines
drivers/gpu/drm/drm_crtc.c +3
-0@@ -430,6 +430,9 @@ int drm_mode_getcrtc(struct drm_device *dev,if (crtc->state) {if (crtc->state->enable) {drm_mode_convert_to_umode (&crtc_resp->mode, &crtc->state->mode); +if (!file_priv->aspect_ratio_allowed) + crtc->state->mode.flags &= + (~DRM_MODE_FLAG_PIC_AR_MASK );Should be manling
crtc_resp->modeinstead of the internal mode.
Agreed. Will correct this in the next patch-set.
Quoted 12 lines
drivers/gpu/drm/drm_crtc.c int drm_mode_getcrtc(struct drm_device *dev, · line 448
Quoted 10 lines
drivers/gpu/drm/drm_crtc.c +3
-0crtc_resp->mode_valid =1 ; }else {@@ -440,6 +443,9 @@ int drm_mode_getcrtc(struct drm_device *dev, crtc_resp->y = crtc->y;if (crtc->enabled) {drm_mode_convert_to_umode (&crtc_resp->mode, &crtc->mode); +if (!file_priv->aspect_ratio_allowed) + crtc->mode.flags &= + (~DRM_MODE_FLAG_PIC_AR_MASK );ditto
Quoted 2 lines
Should probably pull this flag filtering logic into a small helper as well.
Agreed. Will correct this in the next patch-set.
Regards,
Ankit
Quoted 97 lines
Quoted 97 lines
drivers/gpu/drm/drm_crtc.c +9
-0crtc_resp->mode_valid =1 ; }else {@@ -614,6 +620,15 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } +if (!file_priv->aspect_ratio_allowed && + (crtc_req->mode.flags &DRM_MODE_FLAG_PIC_AR_MASK ) != +DRM_MODE_FLAG_PIC_AR_NONE ) { +DRM_DEBUG_KMS ("Unexpected aspect-ratio flag bits\n" ); + ret = -EINVAL ; + goto out; + } + + ret =drm_mode_convert_umode (dev, mode, &crtc_req->mode);if (ret) {DRM_DEBUG_KMS ("Invalid mode\n" );drivers/gpu/drm/drm_crtc_internal.h +2
-1@@ -186,7 +186,8 @@ int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state,int drm_atomic_set_property (struct drm_atomic_state *state,struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value); +uint64_t prop_value, +struct drm_file *file_priv);int drm_atomic_get_property (struct drm_mode_object *obj,struct drm_property *property,uint64_t *val); int drm_mode_atomic_ioctl(struct drm_device *dev,drivers/gpu/drm/drm_mode_object.c +6
-3@@ -452,7 +452,8 @@ static int set_property_legacy(struct drm_mode_object *obj,static int set_property_atomic (struct drm_mode_object *obj,struct drm_property *prop, -uint64_t prop_value) +uint64_t prop_value, +struct drm_file *file_priv) {struct drm_device *dev = prop->dev;struct drm_atomic_state *state;@@ -476,7 +477,8 @@ static int set_property_atomic(struct drm_mode_object *obj,obj_to_connector (obj), prop_value); }else { - ret =drm_atomic_set_property (state, obj, prop, prop_value); + ret =drm_atomic_set_property (state, obj, prop, prop_value, + file_priv);if (ret) goto out; ret =drm_atomic_commit (state);@@ -519,7 +521,8 @@ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, goto out_unref;if (drm_drv_uses_atomic_modeset (property->dev)) - ret =set_property_atomic (arg_obj, property, arg->value); + ret =set_property_atomic (arg_obj, property, arg->value, + file_priv);else ret =set_property_legacy (arg_obj, property, arg->value);drivers/gpu/drm/drm_modes.c +1
-0@@ -1620,6 +1620,7 @@ EXPORT_SYMBOL(drm_mode_create_from_cmdline_mode);* drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo * @out: drm_mode_modeinfo struct to return to the user * @in: drm_display_mode to use +* @file_priv: file_priv structure, to get the user capabilities * * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to * the user. include/drm/drm_atomic.h +1
-1@@ -367,7 +367,7 @@ drm_atomic_get_crtc_state(struct drm_atomic_state *state, struct drm_crtc *crtc);int drm_atomic_crtc_set_property (struct drm_crtc *crtc,struct drm_crtc_state *state,struct drm_property *property, -uint64_t val); +uint64_t val,struct drm_file *file_priv);struct drm_plane_state *__must_check drm_atomic_get_plane_state (struct drm_atomic_state *state,struct drm_plane *plane);@@ -583,7 +583,8 @@ drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state, const struct drm_display_mode *mode); int __must_check drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,
Quoted 8 lines
Quoted 8 lines
include/drm/drm_atomic.h +2
-1- struct drm_property_blob *blob); +struct drm_property_blob *blob, + struct drm_file *file_priv);int __must_check drm_atomic_set_crtc_for_plane (struct drm_plane_state *plane_state,struct drm_crtc *crtc);Signature · 1 line
2.7.4
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 7/9 drm: Expose modes with aspect ratio, only if requested
In reply to Nautiyal, Ankit KFrom: Ankit Nautiyal <[email protected]>
We parse the EDID and add all the modes in the connector's modelist. This adds CEA modes with aspect ratio information too, regadless of whether user space requested this information or not.
This patch prunes the modes with aspect-ratio information, from a connector's modelist, if the user-space has not set the aspect ratio DRM client cap.
V3: As suggested by Ville, modified the mechanism of pruning of modes
with aspect-ratio, if the aspect-ratio is not supported. Instead of straight away pruning such a mode, the mode is retained with aspect ratio bits set to zero, provided it is unique.
V4: rebase
V5: Addressed review comments from Ville:
-used a pointer to store last valid mode.
-avoided, modifying of picture_aspect_ratio in kernel mode,
instead only flags bits of user mode are reset (if aspect-ratio is not supported).
--- drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-)
drivers/gpu/drm/drm_connector.c +40 -5
@@ -1507,8 +1507,10 @@ static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connereturn connector->encoder; } -static bool drm_mode_expose_to_userspace (const struct drm_display_mode *mode, -const struct drm_file *file_priv) +static bool +drm_mode_expose_to_userspace (const struct drm_display_mode *last_mode, +const struct drm_display_mode *mode, +const struct drm_file *file_priv) {/* * If user-space hasn't configured the driver to expose the stereo 3D
@@ -1516,6 +1518,23 @@ static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,*/ if (!file_priv->stereo_allowed &&drm_mode_is_stereo (mode))return false; +/* +* If user-space hasn't configured the driver to expose the modes +* with aspect-ratio, don't expose them. But in case of a unique +* mode, let the mode be passed, so that it can be enumerated with +* aspect ratio bits erased. +*/ +if (!file_priv->aspect_ratio_allowed && + mode->picture_aspect_ratio !=HDMI_PICTURE_ASPECT_NONE ) { +if (last_mode && !drm_mode_match (mode, last_mode, +DRM_MODE_MATCH_TIMINGS | +DRM_MODE_MATCH_CLOCK | +DRM_MODE_MATCH_FLAGS | +DRM_MODE_MATCH_3D_FLAGS )) +return true; +else +return false; + }return true; }
@@ -1527,6 +1546,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,struct drm_connector *connector;struct drm_encoder *encoder;struct drm_display_mode *mode; +struct drm_display_mode *last_valid_mode;int mode_count =0 ;int encoders_count =0 ;int ret =0 ;
@@ -1582,9 +1602,13 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, out_resp->connection = connector->status;/* delayed so we get modes regardless of pre-fill_modes state */ + last_valid_mode =NULL ;list_for_each_entry (mode, &connector->modes, head) -if (drm_mode_expose_to_userspace (mode, file_priv)) +if (drm_mode_expose_to_userspace (last_valid_mode, mode, + file_priv)) { mode_count++; + last_valid_mode = mode; + }/* * This ioctl is called twice, once to determine how much space is
@@ -1593,11 +1617,21 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,if ((out_resp->count_modes >= mode_count) && mode_count) { copied =0 ; mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long )out_resp->modes_ptr; + last_valid_mode =NULL ;list_for_each_entry (mode, &connector->modes, head) { -if (!drm_mode_expose_to_userspace (mode, file_priv)) +if (!drm_mode_expose_to_userspace (last_valid_mode, + mode, + file_priv))continue ; -drm_mode_convert_to_umode (&u_mode, mode); + +/* +* Reset the aspect-ratio flag bits from the user mode, +* if the user mode does have aspect ratio capability. +*/ +if (!file_priv->aspect_ratio_allowed) + u_mode.flags &= (~DRM_MODE_FLAG_PIC_AR_MASK ); +if (copy_to_user (mode_ptr + copied, &u_mode,sizeof (u_mode))) { ret = -EFAULT ;
@@ -1605,6 +1639,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, goto out; } + last_valid_mode = mode; copied++; } }
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 7/9] drm: Expose modes with aspect ratio, only if requested
Quoted 35 lines · Ankit K
From: Ankit Nautiyal <[email protected]>
We parse the EDID and add all the modes in the connector's modelist. This adds CEA modes with aspect ratio information too, regadless of whether user space requested this information or not.
This patch prunes the modes with aspect-ratio information, from a connector's modelist, if the user-space has not set the aspect ratio DRM client cap.
Cc Ville Syrjala <[email protected]>Cc Shashank Sharma <[email protected]>Cc Jose Abreu <[email protected]>Signed-off-by Ankit Nautiyal <[email protected]>V3: As suggested by Ville, modified the mechanism of pruning of modes
with aspect-ratio, if the aspect-ratio is not supported. Instead of straight away pruning such a mode, the mode is retained with aspect ratio bits set to zero, provided it is unique.
V4: rebase
V5: Addressed review comments from Ville:
-used a pointer to store last valid mode.
-avoided, modifying ofpicture_aspect_ratioin kernel mode,
instead only flags bits of user mode are reset (if aspect-ratio is not supported).--- drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-)drivers/gpu/drm/drm_connector.c +0
-0
drivers/gpu/drm/drm_connector.c static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *conne · line 1512
Quoted 8 lines
drivers/gpu/drm/drm_connector.c +3
-2@@ -1507,8 +1507,10 @@ static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connereturn connector->encoder; } -static bool drm_mode_expose_to_userspace (const struct drm_display_mode *mode, -const struct drm_file *file_priv) +static bool +drm_mode_expose_to_userspace(const struct drm_display_mode *last_mode, + const struct drm_display_mode *mode,
I would put the 'mode' argument first since that's the "main" object we're operating on.
drivers/gpu/drm/drm_connector.c static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, · line 1525
Quoted 13 lines
drivers/gpu/drm/drm_connector.c +6
-0+ const struct drm_file *file_priv) {/* * If user-space hasn't configured the driver to expose the stereo 3D @@ -1516,6 +1518,23 @@ static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,*/ if (!file_priv->stereo_allowed &&drm_mode_is_stereo (mode))return false; +/* +* If user-space hasn't configured the driver to expose the modes +* with aspect-ratio, don't expose them. But in case of a unique +* mode, let the mode be passed, so that it can be enumerated with +* aspect ratio bits erased.
Might want to note that we expect the list to be sorted such that modes that have different aspect ratio but are otherwise identical are back to back.
drivers/gpu/drm/drm_connector.c static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, · line 1536
Quoted 11 lines
drivers/gpu/drm/drm_connector.c +11
-0+*/ +if (!file_priv->aspect_ratio_allowed && + mode->picture_aspect_ratio !=HDMI_PICTURE_ASPECT_NONE ) { +if (last_mode && !drm_mode_match (mode, last_mode, +DRM_MODE_MATCH_TIMINGS | +DRM_MODE_MATCH_CLOCK | +DRM_MODE_MATCH_FLAGS | +DRM_MODE_MATCH_3D_FLAGS )) +return true; +else +return false;
How does that even work? It'll return false as long as last_mode==NULL, and last_mode never becomes non-NULL unless we return true.
To me it looks like the correct logic would be:
if (last_mode && drm_mode_match(...))
return false;
Quoted 37 lines
drivers/gpu/drm/drm_connector.c +11
-2+ }return true; }@@ -1527,6 +1546,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,struct drm_connector *connector;struct drm_encoder *encoder;struct drm_display_mode *mode; +struct drm_display_mode *last_valid_mode;int mode_count =0 ;int encoders_count =0 ;int ret =0 ;@@ -1582,9 +1602,13 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, out_resp->connection = connector->status;/* delayed so we get modes regardless of pre-fill_modes state */ + last_valid_mode =NULL ;list_for_each_entry (mode, &connector->modes, head) -if (drm_mode_expose_to_userspace (mode, file_priv)) +if (drm_mode_expose_to_userspace (last_valid_mode, mode, + file_priv)) { mode_count++; + last_valid_mode = mode; + }/* * This ioctl is called twice, once to determine how much space is @@ -1593,11 +1617,21 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,if ((out_resp->count_modes >= mode_count) && mode_count) { copied =0 ; mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long )out_resp->modes_ptr; + last_valid_mode =NULL ;list_for_each_entry (mode, &connector->modes, head) { -if (!drm_mode_expose_to_userspace (mode, file_priv)) +if (!drm_mode_expose_to_userspace (last_valid_mode, + mode, + file_priv))
drivers/gpu/drm/drm_connector.c int drm_mode_getconnector(struct drm_device *dev, void *data, · line 1633
Quoted 10 lines
drivers/gpu/drm/drm_connector.c +7
-1continue ; -drm_mode_convert_to_umode (&u_mode, mode); + +/* +* Reset the aspect-ratio flag bits from the user mode, +* if the user mode does have aspect ratio capability. +*/ +if (!file_priv->aspect_ratio_allowed) + u_mode.flags &= (~DRM_MODE_FLAG_PIC_AR_MASK );
Useless parens. Could use the same helper I suggested we add for getcrtc() and getblob().
Quoted 14 lines
drivers/gpu/drm/drm_connector.c +2
-0+if (copy_to_user (mode_ptr + copied, &u_mode,sizeof (u_mode))) { ret = -EFAULT ;@@ -1605,6 +1639,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, goto out; } + last_valid_mode = mode; copied++; } }Signature · 1 line
2.7.4
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 7/9] drm: Expose modes with aspect ratio, only if requested
Quoted 39 lines · Ville Syrjälä
Quoted 38 lines · Ankit K
From: Ankit Nautiyal <[email protected]>
We parse the EDID and add all the modes in the connector's modelist. This adds CEA modes with aspect ratio information too, regadless of whether user space requested this information or not.
This patch prunes the modes with aspect-ratio information, from a connector's modelist, if the user-space has not set the aspect ratio DRM client cap.
Cc Ville Syrjala <[email protected]>Cc Shashank Sharma <[email protected]>Cc Jose Abreu <[email protected]>Signed-off-by Ankit Nautiyal <[email protected]>V3: As suggested by Ville, modified the mechanism of pruning of modes
with aspect-ratio, if the aspect-ratio is not supported. Instead of straight away pruning such a mode, the mode is retained with aspect ratio bits set to zero, provided it is unique.
V4: rebase
V5: Addressed review comments from Ville:
-used a pointer to store last valid mode.
-avoided, modifying ofpicture_aspect_ratioin kernel mode,
instead only flags bits of user mode are reset (if aspect-ratio is not supported).--- drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-)drivers/gpu/drm/drm_connector.c +0
-0@@ -1507,8 +1507,10 @@ static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connereturn connector->encoder; }
Quoted 7 lines
drivers/gpu/drm/drm_connector.c static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *conne · line 1512
Quoted 5 lines
drivers/gpu/drm/drm_connector.c +3
-2-static bool drm_mode_expose_to_userspace (const struct drm_display_mode *mode, -const struct drm_file *file_priv) +static bool +drm_mode_expose_to_userspace(const struct drm_display_mode *last_mode, + const struct drm_display_mode *mode,I would put the 'mode' argument first since that's the "main" object we're operating on.
Yes that makes more sense. Will make the mode as first argument in the next revision.
Quoted 17 lines
Quoted 6 lines
drivers/gpu/drm/drm_connector.c +1
-0+ const struct drm_file *file_priv) {/* * If user-space hasn't configured the driver to expose the stereo 3D drivers/gpu/drm/drm_connector.c static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, · line 1525
Quoted 8 lines
drivers/gpu/drm/drm_connector.c +5
-0@@ -1516,6 +1518,23 @@ static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,*/ if (!file_priv->stereo_allowed &&drm_mode_is_stereo (mode))return false; +/* +* If user-space hasn't configured the driver to expose the modes +* with aspect-ratio, don't expose them. But in case of a unique +* mode, let the mode be passed, so that it can be enumerated with +* aspect ratio bits erased. Might want to note that we expect the list to be sorted such that modes that have different aspect ratio but are otherwise identical are back to back.
Indeed. The whole idea, is based on the fact that the list of modes are sorted. Will put a note here.
Quoted 15 lines
drivers/gpu/drm/drm_connector.c static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, · line 1536
Quoted 11 lines
drivers/gpu/drm/drm_connector.c +11
-0+*/ +if (!file_priv->aspect_ratio_allowed && + mode->picture_aspect_ratio !=HDMI_PICTURE_ASPECT_NONE ) { +if (last_mode && !drm_mode_match (mode, last_mode, +DRM_MODE_MATCH_TIMINGS | +DRM_MODE_MATCH_CLOCK | +DRM_MODE_MATCH_FLAGS | +DRM_MODE_MATCH_3D_FLAGS )) +return true; +else +return false;How does that even work? It'll return false as long as last_mode==NULL, and
last_modenever becomes non-NULL unless we return true.
Quoted 3 lines
To me it looks like the correct logic would be:
if (last_mode&&drm_mode_match(...))return false;
This is a mistake, thanks for pointing it out.
While testing with aspect-ratio cap not set, for all the available displays, the first mode in the list, never had a mode with aspect ratio. (or in other words, first mode was always with aspect ratio NONE) This resulted in early exit from the condition and returning true, making last_mode as the first mode.
Long story short, couldn't catch the problem while testing as first mode was always with aspect ratio NONE :)
Your suggested code is indeed the correct logic, which I intended.
Quoted 41 lines
Quoted 41 lines
drivers/gpu/drm/drm_connector.c +12
-3+ }return true; }@@ -1527,6 +1546,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,struct drm_connector *connector;struct drm_encoder *encoder;struct drm_display_mode *mode; +struct drm_display_mode *last_valid_mode;int mode_count =0 ;int encoders_count =0 ;int ret =0 ;@@ -1582,9 +1602,13 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, out_resp->connection = connector->status;/* delayed so we get modes regardless of pre-fill_modes state */ + last_valid_mode =NULL ;list_for_each_entry (mode, &connector->modes, head) -if (drm_mode_expose_to_userspace (mode, file_priv)) +if (drm_mode_expose_to_userspace (last_valid_mode, mode, + file_priv)) { mode_count++; + last_valid_mode = mode; + }/* * This ioctl is called twice, once to determine how much space is @@ -1593,11 +1617,21 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,if ((out_resp->count_modes >= mode_count) && mode_count) { copied =0 ; mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long )out_resp->modes_ptr; + last_valid_mode =NULL ;list_for_each_entry (mode, &connector->modes, head) { -if (!drm_mode_expose_to_userspace (mode, file_priv)) +if (!drm_mode_expose_to_userspace (last_valid_mode, + mode, + file_priv))continue ; -drm_mode_convert_to_umode (&u_mode, mode); +
Quoted 8 lines
drivers/gpu/drm/drm_connector.c int drm_mode_getconnector(struct drm_device *dev, void *data, · line 1633
Quoted 6 lines
drivers/gpu/drm/drm_connector.c +6
-0+/* +* Reset the aspect-ratio flag bits from the user mode, +* if the user mode does have aspect ratio capability. +*/ +if (!file_priv->aspect_ratio_allowed) + u_mode.flags &= (~DRM_MODE_FLAG_PIC_AR_MASK );Useless parens. Could use the same helper I suggested we add for
getcrtc()andgetblob().
Yes, the agreed helper function will be used here.
Regards,
Ankit
Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/drm_connector.c +1
-0+if (copy_to_user (mode_ptr + copied, &u_mode,sizeof (u_mode))) { ret = -EFAULT ;@@ -1605,6 +1639,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/drm_connector.c +1
-0goto out; } + last_valid_mode = mode; copied++; } }Signature · 1 line
2.7.4
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 8/9 drm: Add aspect ratio parsing in DRM layer
In reply to Nautiyal, Ankit KFrom: "Sharma, Shashank" <[email protected]>
Current DRM layer functions don't parse aspect ratio information while converting a user mode->kernel mode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC.
This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC).
Background:
This patch was once reviewed and merged, and later reverted due to lack of DRM cap protection. This is a re-spin of this patch, this time with DRM cap protection, to avoid aspect ratio information, when the client doesn't request for it.
Review link: https://pw-emeril.freedesktop.org/patch/104068/
Background discussion: https://patchwork.kernel.org/patch/9379057/
V3: modified the aspect-ratio check in drm_mode_equal as per new flags
provided by Ville. https://patchwork.freedesktop.org/patch/188043/
V4: rebase
V5: rebase
--- drivers/gpu/drm/drm_modes.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_modes.c +32 -1
@@ -1050,7 +1050,8 @@ bool drm_mode_equal(const struct drm_display_mode *mode1,DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_CLOCK |DRM_MODE_MATCH_FLAGS | - DRM_MODE_MATCH_3D_FLAGS); +DRM_MODE_MATCH_3D_FLAGS | + DRM_MODE_MATCH_ASPECT_RATIO); }EXPORT_SYMBOL (drm_mode_equal);
@@ -1649,6 +1650,21 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; + out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ; + +switch (in->picture_aspect_ratio) { +case HDMI_PICTURE_ASPECT_4_3 : + out->flags |=DRM_MODE_FLAG_PIC_AR_4_3 ; +break ; +case HDMI_PICTURE_ASPECT_16_9 : + out->flags |=DRM_MODE_FLAG_PIC_AR_16_9 ; +break ; +case HDMI_PICTURE_ASPECT_RESERVED : +default : + out->flags |=DRM_MODE_FLAG_PIC_AR_NONE ; +break ; + } +strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ; }
@@ -1693,6 +1709,21 @@ int drm_mode_convert_umode(struct drm_device *dev,strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ; +/* Clearing picture aspect ratio bits from out flags */ + out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ; + +switch (in->flags &DRM_MODE_FLAG_PIC_AR_MASK ) { +case DRM_MODE_FLAG_PIC_AR_4_3 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_4_3 ; +break ; +case DRM_MODE_FLAG_PIC_AR_16_9 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_16_9 ; +break ; +default : + out->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ; +break ; + } + out->status =drm_mode_validate_driver (dev, out);if (out->status !=MODE_OK ) goto out;
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 8/9] drm: Add aspect ratio parsing in DRM layer
Quoted 44 lines · Ankit K
From: "Sharma, Shashank" <[email protected]>
Current DRM layer functions don't parse aspect ratio information while converting a user
mode->kernelmode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC.This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC).
Background:
This patch was once reviewed and merged, and later reverted due to lack of DRM cap protection. This is a re-spin of this patch, this time with DRM cap protection, to avoid aspect ratio information, when the client doesn't request for it.Review link: https://pw-emeril.freedesktop.org/patch/104068/
Background discussion: https://patchwork.kernel.org/patch/9379057/Signed-off-by Shashank Sharma <[email protected]>Signed-off-by Lin, Jia <[email protected]>Signed-off-by Akashdeep Sharma <[email protected]>Reviewed-by Jim Bride <[email protected]> (V2)Reviewed-by Jose Abreu <[email protected]> (V4)Cc Ville Syrjala <[email protected]>Cc Jim Bride <[email protected]>Cc Jose Abreu <[email protected]>Cc Ankit Nautiyal <[email protected]>V3: modified the aspect-ratio check in
drm_mode_equalas per new flags
provided by Ville. https://patchwork.freedesktop.org/patch/188043/
V4: rebase
V5: rebase--- drivers/gpu/drm/drm_modes.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)drivers/gpu/drm/drm_modes.c +0
-0
drivers/gpu/drm/drm_modes.c bool drm_mode_equal(const struct drm_display_mode *mode1, · line 1054
Quoted 6 lines
drivers/gpu/drm/drm_modes.c +2
-1@@ -1050,7 +1050,8 @@ bool drm_mode_equal(const struct drm_display_mode *mode1,DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_CLOCK |DRM_MODE_MATCH_FLAGS | - DRM_MODE_MATCH_3D_FLAGS); +DRM_MODE_MATCH_3D_FLAGS | + DRM_MODE_MATCH_ASPECT_RATIO);
Hmm. I wonder if all the users are expecting this. Based on a cursory examination drm_fb_helper might want to ignore the aspect ratio since it's just looking to clone the same mode on multiple outputs. The other cases don't look to me like they should suffer badly from this.
drivers/gpu/drm/drm_modes.c void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, · line 1653
Quoted 8 lines
drivers/gpu/drm/drm_modes.c +1
-0}EXPORT_SYMBOL (drm_mode_equal);@@ -1649,6 +1650,21 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; + out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ;
This looks redundant. The internal mode should not have the aspect ratio flags set. Or are we changing that?
Quoted 18 lines
drivers/gpu/drm/drm_modes.c +14
-0+ +switch (in->picture_aspect_ratio) { +case HDMI_PICTURE_ASPECT_4_3 : + out->flags |=DRM_MODE_FLAG_PIC_AR_4_3 ; +break ; +case HDMI_PICTURE_ASPECT_16_9 : + out->flags |=DRM_MODE_FLAG_PIC_AR_16_9 ; +break ; +case HDMI_PICTURE_ASPECT_RESERVED : +default : + out->flags |=DRM_MODE_FLAG_PIC_AR_NONE ; +break ; + } +strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ; }
drivers/gpu/drm/drm_modes.c int drm_mode_convert_umode(struct drm_device *dev, · line 1712
Quoted 4 lines
drivers/gpu/drm/drm_modes.c +1
-0@@ -1693,6 +1709,21 @@ int drm_mode_convert_umode(struct drm_device *dev,strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ; +/* Clearing picture aspect ratio bits from out flags */
What the code is doing is obvious so this comment is redundant. The non-obvious part (ie. the "why?") is what the comment should contain.
Quoted 19 lines
drivers/gpu/drm/drm_modes.c +14
-0+ out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ; + +switch (in->flags &DRM_MODE_FLAG_PIC_AR_MASK ) { +case DRM_MODE_FLAG_PIC_AR_4_3 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_4_3 ; +break ; +case DRM_MODE_FLAG_PIC_AR_16_9 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_16_9 ; +break ; +default : + out->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ; +break ; + } + out->status =drm_mode_validate_driver (dev, out);if (out->status !=MODE_OK ) goto out;Signature · 1 line
2.7.4
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 8/9] drm: Add aspect ratio parsing in DRM layer
Quoted 40 lines · Ville Syrjälä
Quoted 39 lines · Ankit K
From: "Sharma, Shashank" <[email protected]>
Current DRM layer functions don't parse aspect ratio information while converting a user
mode->kernelmode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC.This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC).
Background:
This patch was once reviewed and merged, and later reverted due to lack of DRM cap protection. This is a re-spin of this patch, this time with DRM cap protection, to avoid aspect ratio information, when the client doesn't request for it.Review link: https://pw-emeril.freedesktop.org/patch/104068/
Background discussion: https://patchwork.kernel.org/patch/9379057/Signed-off-by Shashank Sharma <[email protected]>Signed-off-by Lin, Jia <[email protected]>Signed-off-by Akashdeep Sharma <[email protected]>Reviewed-by Jim Bride <[email protected]> (V2)Reviewed-by Jose Abreu <[email protected]> (V4)Cc Ville Syrjala <[email protected]>Cc Jim Bride <[email protected]>Cc Jose Abreu <[email protected]>Cc Ankit Nautiyal <[email protected]>V3: modified the aspect-ratio check in
drm_mode_equalas per new flags
provided by Ville. https://patchwork.freedesktop.org/patch/188043/
V4: rebase
V5: rebase--- drivers/gpu/drm/drm_modes.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
Quoted 15 lines
drivers/gpu/drm/drm_modes.c bool drm_mode_equal(const struct drm_display_mode *mode1, · line 1054
Quoted 11 lines
drivers/gpu/drm/drm_modes.c +2
-1@@ -1050,7 +1050,8 @@ bool drm_mode_equal(const struct drm_display_mode *mode1,DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_CLOCK |DRM_MODE_MATCH_FLAGS | - DRM_MODE_MATCH_3D_FLAGS); +DRM_MODE_MATCH_3D_FLAGS | + DRM_MODE_MATCH_ASPECT_RATIO);Hmm. I wonder if all the users are expecting this. Based on a cursory examination
drm_fb_helpermight want to ignore the aspect ratio since it's just looking to clone the same mode on multiple outputs. The other cases don't look to me like they should suffer badly from this.
Agreed.
Need to add a function drm_mode_equal_no_aspect_ratio() in drm_modes.c which will compare every field, other than the aspect-ratio.
Next, in the drm_target_cloned( ), where same modes are to be cloned on multiple outputs, instead of drm_mode_equal( ), drm_mode_equal_no_aspect_ratio( ) must be called.
Is this approach correct?
Quoted 11 lines
drivers/gpu/drm/drm_modes.c void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, · line 1653
Quoted 9 lines
drivers/gpu/drm/drm_modes.c +1
-0}EXPORT_SYMBOL (drm_mode_equal);@@ -1649,6 +1650,21 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; + out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ;This looks redundant. The internal mode should not have the aspect ratio flags set. Or are we changing that?
Yes right, the aspect-ratio flags are never set in the internal-mode flags. This line can be dropped.
Quoted 22 lines
Quoted 22 lines
drivers/gpu/drm/drm_modes.c +14
-0+ +switch (in->picture_aspect_ratio) { +case HDMI_PICTURE_ASPECT_4_3 : + out->flags |=DRM_MODE_FLAG_PIC_AR_4_3 ; +break ; +case HDMI_PICTURE_ASPECT_16_9 : + out->flags |=DRM_MODE_FLAG_PIC_AR_16_9 ; +break ; +case HDMI_PICTURE_ASPECT_RESERVED : +default : + out->flags |=DRM_MODE_FLAG_PIC_AR_NONE ; +break ; + } +strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ; }@@ -1693,6 +1709,21 @@ int drm_mode_convert_umode(struct drm_device *dev,strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ;
Quoted 4 lines
drivers/gpu/drm/drm_modes.c int drm_mode_convert_umode(struct drm_device *dev, · line 1712
Quoted 1 line
drivers/gpu/drm/drm_modes.c +1
-0+/* Clearing picture aspect ratio bits from out flags */ What the code is doing is obvious so this comment is redundant. The non-obvious part (ie. the "why?") is what the comment should contain.
Thanks for pointing that out, will take care of this in future patches.
Regards,
Ankit
Quoted 12 lines
Quoted 12 lines
drivers/gpu/drm/drm_modes.c +11
-0+ out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ; + +switch (in->flags &DRM_MODE_FLAG_PIC_AR_MASK ) { +case DRM_MODE_FLAG_PIC_AR_4_3 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_4_3 ; +break ; +case DRM_MODE_FLAG_PIC_AR_16_9 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_16_9 ; +break ; +default : + out->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ;
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/drm_modes.c +3
-0+break ; + } + out->status =drm_mode_validate_driver (dev, out);if (out->status !=MODE_OK ) goto out;Signature · 1 line
2.7.4
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v5 8/9] drm: Add aspect ratio parsing in DRM layer
Quoted 67 lines · Ankit K
Quoted 40 lines · Ville Syrjälä
Quoted 39 lines · Ankit K
From: "Sharma, Shashank" <[email protected]>
Current DRM layer functions don't parse aspect ratio information while converting a user
mode->kernelmode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC.This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC).
Background:
This patch was once reviewed and merged, and later reverted due to lack of DRM cap protection. This is a re-spin of this patch, this time with DRM cap protection, to avoid aspect ratio information, when the client doesn't request for it.Review link: https://pw-emeril.freedesktop.org/patch/104068/
Background discussion: https://patchwork.kernel.org/patch/9379057/Signed-off-by Shashank Sharma <[email protected]>Signed-off-by Lin, Jia <[email protected]>Signed-off-by Akashdeep Sharma <[email protected]>Reviewed-by Jim Bride <[email protected]> (V2)Reviewed-by Jose Abreu <[email protected]> (V4)Cc Ville Syrjala <[email protected]>Cc Jim Bride <[email protected]>Cc Jose Abreu <[email protected]>Cc Ankit Nautiyal <[email protected]>V3: modified the aspect-ratio check in
drm_mode_equalas per new flags
provided by Ville. https://patchwork.freedesktop.org/patch/188043/
V4: rebase
V5: rebase--- drivers/gpu/drm/drm_modes.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)Quoted 15 lines
drivers/gpu/drm/drm_modes.c bool drm_mode_equal(const struct drm_display_mode *mode1, · line 1054
Quoted 11 lines
drivers/gpu/drm/drm_modes.c +2
-1@@ -1050,7 +1050,8 @@ bool drm_mode_equal(const struct drm_display_mode *mode1,DRM_MODE_MATCH_TIMINGS |DRM_MODE_MATCH_CLOCK |DRM_MODE_MATCH_FLAGS | - DRM_MODE_MATCH_3D_FLAGS); +DRM_MODE_MATCH_3D_FLAGS | + DRM_MODE_MATCH_ASPECT_RATIO);Hmm. I wonder if all the users are expecting this. Based on a cursory examination
drm_fb_helpermight want to ignore the aspect ratio since it's just looking to clone the same mode on multiple outputs. The other cases don't look to me like they should suffer badly from this.Agreed.
Need to add a functiondrm_mode_equal_no_aspect_ratio()indrm_modes.cwhich will compare
every field, other than the aspect-ratio.
Next, in thedrm_target_cloned( ), where same modes are to be cloned on multiple outputs, instead
ofdrm_mode_equal( ),drm_mode_equal_no_aspect_ratio( )must be called.
Quoted 1 line
Is this approach correct?
Please no more drm_mode_equal_no_whatever(). We should nuke the current ones. If we think the no_whatever pattern is useful we should probably add something like drm_mode_match_except() which takes the set of flags we're going to ignore. Not 100% convinced it's a good pattern to follow though. Just stating explicitly what we want to match seems generally better to me.
Quoted 69 lines
Quoted 5 lines
Quoted 5 lines
drivers/gpu/drm/drm_modes.c +0
-0}EXPORT_SYMBOL (drm_mode_equal);Quoted 7 lines
drivers/gpu/drm/drm_modes.c void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, · line 1653
Quoted 5 lines
drivers/gpu/drm/drm_modes.c +1
-0@@ -1649,6 +1650,21 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; + out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ;This looks redundant. The internal mode should not have the aspect ratio flags set. Or are we changing that?
Yes right, the aspect-ratio flags are never set in the internal-mode flags. This line can be dropped.
Quoted 22 lines
Quoted 22 lines
drivers/gpu/drm/drm_modes.c +14
-0+ +switch (in->picture_aspect_ratio) { +case HDMI_PICTURE_ASPECT_4_3 : + out->flags |=DRM_MODE_FLAG_PIC_AR_4_3 ; +break ; +case HDMI_PICTURE_ASPECT_16_9 : + out->flags |=DRM_MODE_FLAG_PIC_AR_16_9 ; +break ; +case HDMI_PICTURE_ASPECT_RESERVED : +default : + out->flags |=DRM_MODE_FLAG_PIC_AR_NONE ; +break ; + } +strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ; }@@ -1693,6 +1709,21 @@ int drm_mode_convert_umode(struct drm_device *dev,strncpy (out->name, in->name,DRM_DISPLAY_MODE_LEN ); out->name[DRM_DISPLAY_MODE_LEN -1 ] =0 ;Quoted 4 lines
drivers/gpu/drm/drm_modes.c int drm_mode_convert_umode(struct drm_device *dev, · line 1712
Quoted 1 line
drivers/gpu/drm/drm_modes.c +1
-0+/* Clearing picture aspect ratio bits from out flags */ What the code is doing is obvious so this comment is redundant. The non-obvious part (ie. the "why?") is what the comment should contain.
Thanks for pointing that out, will take care of this in future patches.
Regards,
AnkitQuoted 20 lines
Quoted 20 lines
drivers/gpu/drm/drm_modes.c +14
-0+ out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK ; + +switch (in->flags &DRM_MODE_FLAG_PIC_AR_MASK ) { +case DRM_MODE_FLAG_PIC_AR_4_3 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_4_3 ; +break ; +case DRM_MODE_FLAG_PIC_AR_16_9 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_16_9 ; +break ; +default : + out->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ; +break ; + } + out->status =drm_mode_validate_driver (dev, out);if (out->status !=MODE_OK ) goto out;Signature · 1 line
2.7.4
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 9/9 drm: Add and handle new aspect ratios in DRM layer
In reply to Nautiyal, Ankit KFrom: "Sharma, Shashank" <[email protected]>
HDMI 2.0/CEA-861-F introduces two new aspect ratios:
- 64:27
- 256:135
This patch:
- Adds new DRM flags for to represent these new aspect ratios.
- Adds new cases to handle these aspect ratios while converting from user->kernel mode or vise versa.
This patch was once reviewed and merged, and later reverted due to lack of DRM client protection, while adding aspect ratio bits in user modes. This is a re-spin of the series, with DRM client cap protection.
The previous series can be found here:
https://pw-emeril.freedesktop.org/series/10850/
V3: rebase
V4: rebase
V5: corrected the macro name for an aspect ratio, in a switch case.
--- drivers/gpu/drm/drm_modes.c | 12 ++++++++++++ include/uapi/drm/drm_mode.h | 6 ++++++ 2 files changed, 18 insertions(+)
drivers/gpu/drm/drm_modes.c +12 -0
@@ -1659,6 +1659,12 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,case HDMI_PICTURE_ASPECT_16_9 : out->flags |=DRM_MODE_FLAG_PIC_AR_16_9 ;break ; +case HDMI_PICTURE_ASPECT_64_27 : + out->flags |=DRM_MODE_FLAG_PIC_AR_64_27 ; +break ; +case HDMI_PICTURE_ASPECT_256_135 : + out->flags |=DRM_MODE_FLAG_PIC_AR_256_135 ; +break ;case HDMI_PICTURE_ASPECT_RESERVED :default : out->flags |=DRM_MODE_FLAG_PIC_AR_NONE ;
@@ -1719,6 +1725,12 @@ int drm_mode_convert_umode(struct drm_device *dev,case DRM_MODE_FLAG_PIC_AR_16_9 : out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_16_9 ;break ; +case DRM_MODE_FLAG_PIC_AR_64_27 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_64_27 ; +break ; +case DRM_MODE_FLAG_PIC_AR_256_135 : + out->picture_aspect_ratio |=HDMI_PICTURE_ASPECT_256_135 ; +break ;default : out->picture_aspect_ratio =HDMI_PICTURE_ASPECT_NONE ;break ;
include/uapi/drm/drm_mode.h +6 -0
@@ -93,6 +93,8 @@ extern "C" {#define DRM_MODE_PICTURE_ASPECT_NONE 0#define DRM_MODE_PICTURE_ASPECT_4_3 1#define DRM_MODE_PICTURE_ASPECT_16_9 2 +#define DRM_MODE_PICTURE_ASPECT_64_27 3 +#define DRM_MODE_PICTURE_ASPECT_256_135 4/* Aspect ratio flag bitmask (4 bits 22:19) */ #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19)
@@ -102,6 +104,10 @@ extern "C" { (DRM_MODE_PICTURE_ASPECT_4_3<<19)#define DRM_MODE_FLAG_PIC_AR_16_9 \ (DRM_MODE_PICTURE_ASPECT_16_9<<19) +#define DRM_MODE_FLAG_PIC_AR_64_27 \ + (DRM_MODE_PICTURE_ASPECT_64_27<<19) +#define DRM_MODE_FLAG_PIC_AR_256_135 \ + (DRM_MODE_PICTURE_ASPECT_256_135<<19)#define DRM_MODE_FLAG_ALL (DRM_MODE_FLAG_PHSYNC | \ DRM_MODE_FLAG_NHSYNC | \
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel