Update for the Broadcom STB DPFE driver
Markus Mayer
maintainercover Update for the Broadcom STB DPFE driver
This series primarily introduces a new way of passing information from the DCPU to the host CPU.
Previously, all communication was via the DCPU data RAM. This communication mode is still supported. In addition, we now support passing data via the message RAM. The driver will dynamically detect which method to use upon receiving a reply.
The series also contains two fixes to the driver that have no direct relation with the new communication feature.
Markus Mayer (3):
memory: brcmstb: dpfe: properly mask vendor error bits
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: support new way of passing data from the DCPU
drivers/memory/brcmstb_dpfe.c | 74 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 60 insertions(+), 14 deletions(-)
Signature · 1 line
2.7.4
Markus Mayer
maintainerPATCH 1/3 memory: brcmstb: dpfe: properly mask vendor error bits
We were printing the entire 32 bit register rather than just the lower 8 bits. Anything above bit 7 is reserved and may be any random value.
--- drivers/memory/brcmstb_dpfe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/memory/brcmstb_dpfe.c +2 -1
@@ -603,7 +603,8 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,readl_relaxed (info +DRAM_VENDOR_MR6 ) &DRAM_VENDOR_MASK ,readl_relaxed (info +DRAM_VENDOR_MR7 ) &DRAM_VENDOR_MASK ,readl_relaxed (info +DRAM_VENDOR_MR8 ) &DRAM_VENDOR_MASK , - readl_relaxed(info + DRAM_VENDOR_ERROR)); +readl_relaxed (info +DRAM_VENDOR_ERROR ) & + DRAM_VENDOR_MASK); }static int brcmstb_dpfe_resume (struct platform_device *pdev)
Signature · 1 line
2.7.4
Florian Fainelli
AppliedRe: [PATCH 1/3] memory: brcmstb: dpfe: properly mask vendor error bits
Quoted 6 lines · Markus Mayer
We were printing the entire 32 bit register rather than just the lower 8 bits. Anything above bit 7 is reserved and may be any random value.
Fixes 2f330caff577 ("memory: brcmstb: Add driver for DPFE")Signed-off-by Markus Mayer <[email protected]>---
Applied to drivers/fixes, thanks!
--
Florian
Markus Mayer
maintainerPATCH 2/3 memory: brcmstb: dpfe: fix type declaration of variable "ret"
In reply to Markus MayerIn some functions, variable "ret" should be ssize_t, so we fix it.
--- drivers/memory/brcmstb_dpfe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/memory/brcmstb_dpfe.c +3 -3
@@ -507,7 +507,7 @@ static ssize_t show_info(struct device *dev, struct device_attribute *devattr, {u32 response[MSG_FIELD_MAX ];unsigned int info; -int ret; +ssize_t ret; ret =generic_show (DPFE_CMD_GET_INFO , response, dev, buf);if (ret)
@@ -531,7 +531,7 @@ static ssize_t show_refresh(struct device *dev,unsigned int offset;u8 refresh, sr_abort, ppre, thermal_offs, tuf;u32 mr4; -int ret; +ssize_t ret; ret =generic_show (DPFE_CMD_GET_REFRESH , response, dev, buf);if (ret)
@@ -588,7 +588,7 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,struct private_data *priv;void __iomem *info;unsigned int offset; -int ret; +ssize_t ret; ret =generic_show (DPFE_CMD_GET_VENDOR , response, dev, buf);if (ret)
Signature · 1 line
2.7.4
Florian Fainelli
AppliedRe: [PATCH 2/3] memory: brcmstb: dpfe: fix type declaration of variable "ret"
Quoted 5 lines · Markus Mayer
In some functions, variable "ret" should be
ssize_t, so we fix it.Fixes 2f330caff577 ("memory: brcmstb: Add driver for DPFE")Signed-off-by Markus Mayer <[email protected]>---
Applied to drivers/fixes, thanks!
--
Florian
Markus Mayer
maintainerPATCH 3/3 memory: brcmstb: dpfe: support new way of passing data from the DCPU
In reply to Markus MayerThe DCPU can now send message data in two ways:
- via the data RAM, as before (this is now message type 0)
- via the message RAM (this is message type 1)
In order to support both methods, we check the message type of the response (bits 31:28) and then treat the offset (bits 27:0) accordingly.
--- drivers/memory/brcmstb_dpfe.c | 65 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 10 deletions(-)
drivers/memory/brcmstb_dpfe.c +55 -10
@@ -45,8 +45,16 @@#define REG_TO_DCPU_MBOX 0x10#define REG_TO_HOST_MBOX 0x14 +/* Macros to process offsets returned by the DCPU */ +#define DRAM_MSG_ADDR_OFFSET 0x0 +#define DRAM_MSG_TYPE_OFFSET 0x1c +#define DRAM_MSG_ADDR_MASK ((1UL << DRAM_MSG_TYPE_OFFSET) - 1) +#define DRAM_MSG_TYPE_MASK ((1UL << \ + (BITS_PER_LONG - DRAM_MSG_TYPE_OFFSET)) - 1) +/* Message RAM */ -#define DCPU_MSG_RAM (x) (0x100 + (x) * sizeof(u32)) +#define DCPU_MSG_RAM_START 0x100 +#define DCPU_MSG_RAM (x) (DCPU_MSG_RAM_START + (x) * sizeof(u32))/* DRAM Info Offsets & Masks */ #define DRAM_INFO_INTERVAL 0x0
@@ -255,6 +263,40 @@ static unsigned int get_msg_chksum(const u32 msg[])return sum; } +static void __iomem *get_msg_ptr (struct private_data *priv,u32 response, +char *buf,ssize_t *size) +{ +unsigned int msg_type; +unsigned int offset; +void __iomem *ptr =NULL ; + + msg_type = (response >>DRAM_MSG_TYPE_OFFSET ) &DRAM_MSG_TYPE_MASK ; + offset = (response >>DRAM_MSG_ADDR_OFFSET ) &DRAM_MSG_ADDR_MASK ; + +/* +* msg_type == 1: the offset is relative to the message RAM +* msg_type == 0: the offset is relative to the data RAM (this is the +* previous way of passing data) +* msg_type is anything else: there's critical hardware problem +*/ +switch (msg_type) { +case 1 : + ptr = priv->regs +DCPU_MSG_RAM_START + offset; +break ; +case 0 : + ptr = priv->dmem + offset; +break ; +default : +dev_emerg (priv->dev,"invalid message reply from DCPU: %#x\n" , + response); +if (buf && size) + *size =sprintf (buf, +"FATAL: communication error with DCPU\n" ); + } + +return ptr; +} +static int __send_command (struct private_data *priv,unsigned int cmd,u32 result[]) {
@@ -528,7 +570,6 @@ static ssize_t show_refresh(struct device *dev,u32 response[MSG_FIELD_MAX ];void __iomem *info;struct private_data *priv; -unsigned int offset;u8 refresh, sr_abort, ppre, thermal_offs, tuf;u32 mr4;ssize_t ret;
@@ -538,8 +579,10 @@ static ssize_t show_refresh(struct device *dev,return ret; priv =dev_get_drvdata (dev); - offset = response[MSG_ARG0 ]; - info = priv->dmem + offset; + + info =get_msg_ptr (priv, response[MSG_ARG0 ], buf, &ret); +if (!info) +return ret; mr4 =readl_relaxed (info +DRAM_INFO_MR4 ) &DRAM_INFO_MR4_MASK ;
@@ -561,7 +604,6 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,u32 response[MSG_FIELD_MAX ];struct private_data *priv;void __iomem *info; -unsigned int offset;unsigned long val;int ret;
@@ -574,8 +616,10 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,if (ret)return ret; - offset = response[MSG_ARG0 ]; - info = priv->dmem + offset; + info =get_msg_ptr (priv, response[MSG_ARG0 ],NULL ,NULL ); +if (!info) +return -EIO ; +writel_relaxed (val, info +DRAM_INFO_INTERVAL );return count;
@@ -587,16 +631,17 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,u32 response[MSG_FIELD_MAX ];struct private_data *priv;void __iomem *info; -unsigned int offset;ssize_t ret; ret =generic_show (DPFE_CMD_GET_VENDOR , response, dev, buf);if (ret)return ret; - offset = response[MSG_ARG0 ]; priv =dev_get_drvdata (dev); - info = priv->dmem + offset; + + info =get_msg_ptr (priv, response[MSG_ARG0 ], buf, &ret); +if (!info) +return ret; return sprintf(buf, "%#x %#x %#x %#x %#x\n", readl_relaxed(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK,
Signature · 1 line
2.7.4
Florian Fainelli
AppliedRe: [PATCH 3/3] memory: brcmstb: dpfe: support new way of passing data from the DCPU
Quoted 10 lines · Markus Mayer
The DCPU can now send message data in two ways:
- via the data RAM, as before (this is now message type 0)
- via the message RAM (this is message type 1)In order to support both methods, we check the message type of the response (bits 31:28) and then treat the offset (bits 27:0) accordingly.
Signed-off-by Markus Mayer <[email protected]>---
Applied to drivers/fixes, thanks!
--
Florian