ARM: dts: imx6: RDU2: detail USDHC description
Subsystems (2)
PATCH 1/1 ARM: dts: imx6: RDU2: detail USDHC description
None of the slots support 1.8V signaling or SDIO. There is no point in probing for a SD card on the eMMC controller.
Signed-off-by Lucas Stach <[email protected]>
--- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +7 -0
@@ -602,6 +602,8 @@ wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; + no-1-8-v; + no-sdio; status = "okay"; };
@@ -613,6 +615,8 @@ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; + no-1-8-v; + no-sdio; status = "okay"; };
@@ -622,7 +626,10 @@ bus-width = <8>; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_3p3v>; + no-1-8-v; non-removable; + no-sdio; + no-sd; status = "okay"; };
Signature · 1 line
2.15.1
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx6: RDU2: detail USDHC description
Quoted 4 lines · Lucas Stach
None of the slots support 1.8V signaling or SDIO. There is no point in probing for a SD card on the eMMC controller.
Signed-off-by Lucas Stach <[email protected]>
Reviewed-by Fabio Estevam <[email protected]>
Shawn Guo
AppliedPATCH 1/1 ARM: dts: imx6: RDU2: detail USDHC description
In reply to Lucas StachQuoted 4 lines · Lucas Stach
None of the slots support 1.8V signaling or SDIO. There is no point in probing for a SD card on the eMMC controller.
Signed-off-by Lucas Stach <[email protected]>
Applied, thanks.