media: radio: Critical v4l2 registration bugfix for si470x over i2c
PATCH v3 1/1 media: radio: Critical v4l2 registration bugfix for si470x over i2c
Added the call to v4l2_device_register() required to add a new radio device. Without this patch, it is impossible for the driver to load. This does not affect USB devices.
Fixed cleanup order from v2.
---
diff -uprN linux.orig/drivers/media/radio/si470x/radio-si470x-i2c.c linux/drivers/media/radio/si470x/radio-si470x-i2c.c --- linux.orig/drivers/media/radio/si470x/radio-si470x-i2c.c
2018-01-15 21:58:10.675620432 -0500 +++
linux/drivers/media/radio/si470x/radio-si470x-i2c.c 2018-02-25
19:19:13.796927568 -0500 @@ -43,7 +43,6 @@ static const struct i2c_device_id si470x MODULE_DEVICE_TABLE(i2c, si470x_i2c_id);
-
/**************************************************************************
* Module Parameters **************************************************************************/
@@ -362,22 +361,43 @@ static int si470x_i2c_probe(struct i2c_c
mutex_init(&radio->lock); init_completion(&radio->completion);
+ retval = v4l2_device_register(&client->dev, &radio->v4l2_dev);
+ if (retval < 0) {
+ dev_err(&client->dev, "couldn't register
v4l2_device\n");
+ goto err_radio;
+ }
+
+ v4l2_ctrl_handler_init(&radio->hdl, 2);
+ v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+ v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 15, 1, 15);
+ if (radio->hdl.error) {
+ retval = radio->hdl.error;
+ dev_err(&client->dev, "couldn't register control\n");
+ goto err_dev;
+ }
+
/* video device initialization */ radio->videodev = si470x_viddev_template;
+ radio->videodev.ctrl_handler = &radio->hdl;
+ radio->videodev.lock = &radio->lock;
+ radio->videodev.v4l2_dev = &radio->v4l2_dev;
+ radio->videodev.release = video_device_release_empty;
video_set_drvdata(&radio->videodev, radio);
/* power up : need 110ms */ radio->registers[POWERCFG] = POWERCFG_ENABLE; if (si470x_set_register(radio, POWERCFG) < 0) {
retval = -EIO;
- goto err_radio;
+ goto err_ctrl;
}
msleep(110);
/* get device and chip versions */
if (si470x_get_all_registers(radio) < 0) {
retval = -EIO;
- goto err_radio;
+ goto err_ctrl;
}
dev_info(&client->dev, "DeviceID=0x%4.4hx ChipID=0x%4.4hx\n",
radio->registers[DEVICEID],
radio->registers[SI_CHIPID]); @@ -407,7 +427,7 @@ static int si470x_i2c_probe(struct i2c_c radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL); if (!radio->buffer) {
retval = -EIO;
- goto err_radio;
+ goto err_ctrl;
}
/* rds buffer configuration */
@@ -437,6 +457,10 @@ err_all:
free_irq(client->irq, radio);
err_rds:
kfree(radio->buffer);
+err_ctrl:
+ v4l2_ctrl_handler_free(&radio->hdl);
+err_dev:
+ v4l2_device_unregister(&radio->v4l2_dev);
err_radio:
kfree(radio);
err_initial:
Quoted 9 lines · Douglas Fischer
Added the call to
v4l2_device_register()required to add a new radio device. Without this patch, it is impossible for the driver to load. This does not affect USB devices.Fixed cleanup order from v2.
Signed-off-by Douglas Fischer <[email protected]>---
Quoted 7 lines
diff -uprN
linux.orig/drivers/media/radio/si470x/radio-si470x-i2c.clinux/drivers/media/radio/si470x/radio-si470x-i2c.c---linux.orig/drivers/media/radio/si470x/radio-si470x-i2c.c2018-01-15 21:58:10.675620432 -0500 +++
linux/drivers/media/radio/si470x/radio-si470x-i2c.c2018-02-25
19:19:13.796927568 -0500 @@ -43,7 +43,6 @@ static const structi2c_device_idsi470xMODULE_DEVICE_TABLE(i2c, si470x_i2c_id);
This patch is still corrupt (wrap around). The other two are fine though.
Can you repost this one?
Regards,
Hans
Quoted 72 lines
(quoted diff) +23
-3- /************************************************************************** * Module Parameters **************************************************************************/@@ -362,22 +361,43 @@ static int si470x_i2c_probe(struct i2c_c mutex_init(&radio->lock); init_completion(&radio->completion); + retval = v4l2_device_register(&client->dev, &radio->v4l2_dev); + if (retval < 0) { + dev_err(&client->dev, "couldn't register v4l2_device\n"); + goto err_radio; + } + + v4l2_ctrl_handler_init(&radio->hdl, 2); + v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); + v4l2_ctrl_new_std(&radio->hdl, &si470x_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 15, 1, 15); + if (radio->hdl.error) { + retval = radio->hdl.error; + dev_err(&client->dev, "couldn't register control\n"); + goto err_dev; + } + /* video device initialization */ radio->videodev = si470x_viddev_template; + radio->videodev.ctrl_handler = &radio->hdl; + radio->videodev.lock = &radio->lock; + radio->videodev.v4l2_dev = &radio->v4l2_dev; + radio->videodev.release = video_device_release_empty; video_set_drvdata(&radio->videodev, radio); /* power up : need 110ms */ radio->registers[POWERCFG] = POWERCFG_ENABLE; if (si470x_set_register(radio, POWERCFG) < 0) { retval = -EIO; - goto err_radio; + goto err_ctrl; } msleep(110); /* get device and chip versions */ if (si470x_get_all_registers(radio) < 0) { retval = -EIO; - goto err_radio; + goto err_ctrl; } dev_info(&client->dev, "DeviceID=0x%4.4hx ChipID=0x%4.4hx\n",radio->registers[DEVICEID],
radio->registers[SI_CHIPID]); @@ -407,7 +427,7 @@ static int si470x_i2c_probe(structi2c_cradio->buffer=kmalloc(radio->buf_size, GFP_KERNEL); if (!radio->buffer) {(quoted diff) +5
-1retval = -EIO; - goto err_radio; + goto err_ctrl; } /* rds buffer configuration */@@ -437,6 +457,10 @@ err_all: free_irq(client->irq, radio); err_rds: kfree(radio->buffer); +err_ctrl: + v4l2_ctrl_handler_free(&radio->hdl); +err_dev: + v4l2_device_unregister(&radio->v4l2_dev); err_radio: kfree(radio); err_initial: