ARM: dts: NSP: Switch to port 8 for CPU port
Subsystems (2)
PATCH 1/1 ARM: dts: NSP: Switch to port 8 for CPU port
Now that we have added support for pre-pended Broadcom tags with commit 11606039604c ("net: dsa: b53: Support prepended Broadcom tags") we can switch all the Northstar Plus reference boards to use port 8 for the CPU port. This allows us to prepare room for supporting the Flow Accelerator 2 NAPT offload, and frees up port 5 to be made fully configurable for the modes that it supports: internal, SGMII, RGMII etc.
--- arch/arm/boot/dts/bcm958622hr.dts | 6 +++--- arch/arm/boot/dts/bcm958623hr.dts | 6 +++--- arch/arm/boot/dts/bcm958625hr.dts | 6 +++--- arch/arm/boot/dts/bcm958625k.dts | 6 +++--- arch/arm/boot/dts/bcm988312hr.dts | 6 +++--- 5 files changed, 15 insertions(+), 15 deletions(-)
arch/arm/boot/dts/bcm958622hr.dts +3 -3
@@ -204,10 +204,10 @@ reg = <4>; }; - port at 5 { - ethernet = <&amac0>; + port at 8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex;
arch/arm/boot/dts/bcm958623hr.dts +3 -3
@@ -208,10 +208,10 @@ reg = <4>; }; - port at 5 { - ethernet = <&amac0>; + port at 8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex;
arch/arm/boot/dts/bcm958625hr.dts +3 -3
@@ -210,10 +210,10 @@ reg = <4>; }; - port at 5 { - ethernet = <&amac0>; + port at 8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex;
arch/arm/boot/dts/bcm958625k.dts +3 -3
@@ -245,10 +245,10 @@ reg = <4>; }; - port at 5 { - ethernet = <&amac0>; + port at 8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex;
arch/arm/boot/dts/bcm988312hr.dts +3 -3
@@ -216,10 +216,10 @@ reg = <4>; }; - port at 5 { - ethernet = <&amac0>; + port at 8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex;
Signature · 1 line
2.14.1
Florian Fainelli
AppliedQuoted 9 lines · Florian Fainelli
Now that we have added support for pre-pended Broadcom tags with commit
11606039604c("net: dsa: b53: Support prepended Broadcom tags") we can switch all the Northstar Plus reference boards to use port 8 for the CPU port. This allows us to prepare room for supporting the Flow Accelerator 2 NAPT offload, and frees up port 5 to be made fully configurable for the modes that it supports: internal, SGMII, RGMII etc.Signed-off-by Florian Fainelli <[email protected]>---
Applied to devicetree/next, thanks!
--
Florian