Adds support for secure boot on TCI6630K2L HS devices
cover Adds support for secure boot on TCI6630K2L HS devices
This series adds support for the secure Lammar (K2L) SoC.
It defines a new defconfig file for K2L HS, based on the GP K2L defconfig and updates the u-boot default env variables to install the secure boot-monitor on startup.
Madan Srinivas (2):
configs: k2l: Updates u-boot env to install secure boot monitor
defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
configs/k2l_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ include/configs/k2l_evm.h | 9 +++++++++ 2 files changed, 52 insertions(+) create mode 100644 configs/k2l_hs_evm_defconfig
Signature · 1 line
1.9.1
PATCH 1/2 configs: k2l: Updates u-boot env to install secure boot monitor
This patch updates the default u-boot env for K2L HS devices to install the secure boot monitor and load the fitImage during boot.
---
include/configs/k2l_evm.h | 9 +++++++++ 1 file changed, 9 insertions(+)
include/configs/k2l_evm.h +9 -0
@@ -15,9 +15,18 @@/* Platform type */ #define CONFIG_SOC_K2L +#ifdef CONFIG_TI_SECURE_DEVICE +#define DEFAULT_SEC_BOOT_ENV \ + DEFAULT_FIT_TI_ARGS \ + "findfdt=setenv fdtfile ${name_fdt}\0" +#else +#define DEFAULT_SEC_BOOT_ENV +#endif +/* U-Boot general configuration */ #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ DEFAULT_FW_INITRAMFS_BOOT_ENV \ + DEFAULT_SEC_BOOT_ENV \ "boot=ubi\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,4096\0" \
Signature · 1 line
1.9.1
PATCH 1/2 configs: k2l: Updates u-boot env to install secure boot monitor
+Tom
Quoted 5 lines · Madan Srinivas
This patch updates the default u-boot env for K2L HS devices to install the secure boot monitor and load the fitImage during boot.
Signed-off-by Madan Srinivas <[email protected]>
Thanks and regards,
Lokesh
Quoted 30 lines
---
include/configs/k2l_evm.h | 9 +++++++++ 1 file changed, 9 insertions(+)include/configs/k2l_evm.h +9
-0@@ -15,9 +15,18 @@/* Platform type */ #define CONFIG_SOC_K2L +#ifdef CONFIG_TI_SECURE_DEVICE +#define DEFAULT_SEC_BOOT_ENV \ + DEFAULT_FIT_TI_ARGS \ + "findfdt=setenv fdtfile ${name_fdt}\0" +#else +#define DEFAULT_SEC_BOOT_ENV +#endif +/* U-Boot general configuration */ #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ DEFAULT_FW_INITRAMFS_BOOT_ENV \ + DEFAULT_SEC_BOOT_ENV \ "boot=ubi\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,4096\0" \
PATCH 2/2 defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
In reply to Madan SrinivasAdds a dedicated defconfig to build TI K2L secure
devices. Created from the k2l_evm_defconfig and
removes support for SPL, as SPL is not supported
on K2 HS devices. Corrects SYS_TEXT_BASE for HS
devices.
Also adds TI_SECURE_DEVICE and FIT_IMAGE_POST_PROCESS to include support for secure image creation and authentication
---
configs/k2l_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 configs/k2l_hs_evm_defconfig
configs/k2l_hs_evm_defconfig new file +43 -0
@@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_TI_SECURE_DEVICE=y +CONFIG_SYS_TEXT_BASE=0xC000060 +CONFIG_TI_COMMON_CMD_OPTIONS=y +CONFIG_TARGET_K2L_EVM=y +CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm" +CONFIG_FIT_IMAGE_POST_PROCESS=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_VERSION_VARIABLE=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set +# CONFIG_CMD_GPT is not set +# CONFIG_CMD_MMC is not set +CONFIG_CMD_NAND=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=davinci_nand.0:1024k(bootloader)ro,512k(params)ro,-(ubifs)" +CONFIG_CMD_UBI=y +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_TI_AEMIF=y +# CONFIG_MMC is not set +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_DAVINCI_SPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y
Signature · 1 line
1.9.1
PATCH 2/2 defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
+Tom
Quoted 10 lines · Madan Srinivas
Adds a dedicated defconfig to build TI K2L secure
devices. Created from thek2l_evm_defconfigand
removes support for SPL, as SPL is not supported
on K2 HS devices. CorrectsSYS_TEXT_BASEfor HS
devices.Also adds
TI_SECURE_DEVICEandFIT_IMAGE_POST_PROCESSto include support for secure image creation and authenticationSigned-off-by Madan Srinivas <[email protected]>
Thanks and regards,
Lokesh
Quoted 56 lines
---
configs/k2l_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 configs/k2l_hs_evm_defconfigconfigs/k2l_hs_evm_defconfig new file +43
-0@@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_KEYSTONE=y +CONFIG_TI_SECURE_DEVICE=y +CONFIG_SYS_TEXT_BASE=0xC000060 +CONFIG_TI_COMMON_CMD_OPTIONS=y +CONFIG_TARGET_K2L_EVM=y +CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm" +CONFIG_FIT_IMAGE_POST_PROCESS=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_VERSION_VARIABLE=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set +# CONFIG_CMD_GPT is not set +# CONFIG_CMD_MMC is not set +CONFIG_CMD_NAND=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=davinci_nand.0:1024k(bootloader)ro,512k(params)ro,-(ubifs)" +CONFIG_CMD_UBI=y +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_TI_AEMIF=y +# CONFIG_MMC is not set +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_DAVINCI_SPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y
PATCH 2/2 defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
Quoted 12 lines · Lokesh Vutla
+Tom
Quoted 9 lines · Madan Srinivas
Adds a dedicated defconfig to build TI K2L secure devices. Created from the
k2l_evm_defconfigand removes support for SPL, as SPL is not supported on K2 HS devices. CorrectsSYS_TEXT_BASEfor HS devices.Also adds
TI_SECURE_DEVICEandFIT_IMAGE_POST_PROCESSto include support for secure image creation and authentication
Quoted 12 lines
Quoted 1 line
Signed-off-by Madan Srinivas <[email protected]>Reviewed-by Lokesh Vutla <[email protected]>Thanks and regards,
LokeshQuoted 5 lines
---
configs/k2l_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 configs/k2l_hs_evm_defconfig
Needs to update the relevant MAINTAINERS file, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180227/fca5ae22/attachment.sig>
cover Adds support for secure boot on TCI6630K2L HS devices
In reply to Madan SrinivasQuoted 7 lines · Madan Srinivas
This series adds support for the secure Lammar (K2L) SoC.
It defines a new defconfig file for K2L HS, based on the GP K2L defconfig and updates the u-boot default env variables to install the secure boot-monitor on startup.
Quoted 10 lines
Madan Srinivas (2):
configs: k2l: Updates u-boot env to install secure boot monitor
defconfig:k2l_hs_evm: Addk2l_hs_evm_defconfigconfigs/k2l_hs_evm_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ include/configs/k2l_evm.h | 9 +++++++++ 2 files changed, 52 insertions(+) create mode 100644 configs/k2l_hs_evm_defconfig