hwrng: omap: Fix clock resource for Armada 7K/8K
Subsystems (4)
cover hwrng: omap: Fix clock resource for Armada 7K/8K
Hi,
This short series fixes the way the clocks are used for the SafeXcel IP-76 controller embedded in the Marvell Armada 7K/8K SoCs. On these SoCs a second one is needed in order to clock the registers. It was not noticed until now because we relied on the bootloader and also because the clock driver was wrong.
Thanks to this fix, it would be possible to fix the clock driver without introducing a regression.
The first patch is just a small cleanup found when I wrote the main patch.
Gregory CLEMENT (2):
hwrng: omap - Remove useless test before clk_disable_unprepare
hwrng: omap - Fix clock resource by adding a register clock
Documentation/devicetree/bindings/rng/omap_rng.txt | 7 ++++++- drivers/char/hw_random/omap-rng.c | 22 ++++++++++++++++++---- 2 files changed, 24 insertions(+), 5 deletions(-)
Signature · 1 line
2.16.1
PATCH 1/2 hwrng: omap - Remove useless test before clk_disable_unprepare
clk_disable_unprepare() already checks that the clock pointer is valid. No need to test it before calling it.
--- drivers/char/hw_random/omap-rng.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/char/hw_random/omap-rng.c +2 -4
@@ -499,8 +499,7 @@ static int omap_rng_probe(struct platform_device *pdev)pm_runtime_put_sync (&pdev->dev);pm_runtime_disable (&pdev->dev); -if (!IS_ERR (priv->clk)) -clk_disable_unprepare (priv->clk); +clk_disable_unprepare (priv->clk); err_ioremap:dev_err (dev,"initialization failed.\n" );return ret;
@@ -517,8 +516,7 @@ static int omap_rng_remove(struct platform_device *pdev)pm_runtime_put_sync (&pdev->dev);pm_runtime_disable (&pdev->dev); -if (!IS_ERR (priv->clk)) -clk_disable_unprepare (priv->clk); +clk_disable_unprepare (priv->clk);return 0 ; }
Signature · 1 line
2.16.1
PATCH 2/2 hwrng: omap - Fix clock resource by adding a register clock
In reply to Gregory CLEMENTOn Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory.
The binding documentation is updating accordingly.
--- Documentation/devicetree/bindings/rng/omap_rng.txt | 7 ++++++- drivers/char/hw_random/omap-rng.c | 16 ++++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/rng/omap_rng.txt +6 -1
@@ -13,7 +13,12 @@ Required properties: - interrupts : the interrupt number for the RNG module. Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76" - clocks: the trng clock source. Only mandatory for the - "inside-secure,safexcel-eip76" compatible. + "inside-secure,safexcel-eip76" compatible, the second clock is + needed for the Armada 7K/8K SoCs +- clock-names: mandatory if there is a second clock, in this case the + name must be "core" for the first clock and "reg" for the second + one + Example: /* AM335x */
drivers/char/hw_random/omap-rng.c +16 -0
@@ -150,6 +150,7 @@ struct omap_rng_dev {const struct omap_rng_pdata *pdata;struct hwrng rng;struct clk *clk; +struct clk *clk_reg; };static inline u32 omap_rng_read (struct omap_rng_dev *priv,u16 reg)
@@ -480,6 +481,19 @@ static int omap_rng_probe(struct platform_device *pdev) } } + priv->clk_reg =devm_clk_get (&pdev->dev,"reg" ); +if (IS_ERR (priv->clk_reg) &&PTR_ERR (priv->clk_reg) == -EPROBE_DEFER ) +return -EPROBE_DEFER ; +if (!IS_ERR (priv->clk_reg)) { + ret =clk_prepare_enable (priv->clk_reg); +if (ret) { +dev_err (&pdev->dev, +"Unable to enable the register clk: %d\n" , + ret); + goto err_register; + } + } + ret = (dev->of_node) ?of_get_omap_rng_device_details (priv, pdev) :get_omap_rng_device_details (priv);if (ret)
@@ -499,6 +513,7 @@ static int omap_rng_probe(struct platform_device *pdev)pm_runtime_put_sync (&pdev->dev);pm_runtime_disable (&pdev->dev); +clk_disable_unprepare (priv->clk_reg);clk_disable_unprepare (priv->clk); err_ioremap:dev_err (dev,"initialization failed.\n" );
@@ -517,6 +532,7 @@ static int omap_rng_remove(struct platform_device *pdev)pm_runtime_disable (&pdev->dev);clk_disable_unprepare (priv->clk); +clk_disable_unprepare (priv->clk_reg);return 0 ; }
Signature · 1 line
2.16.1
Herbert Xu
maintainercover hwrng: omap: Fix clock resource for Armada 7K/8K
In reply to Gregory CLEMENTQuoted 14 lines · Gregory CLEMENT
Hi,
This short series fixes the way the clocks are used for the SafeXcel IP-76 controller embedded in the Marvell Armada 7K/8K SoCs. On these SoCs a second one is needed in order to clock the registers. It was not noticed until now because we relied on the bootloader and also because the clock driver was wrong.
Thanks to this fix, it would be possible to fix the clock driver without introducing a regression.
The first patch is just a small cleanup found when I wrote the main patch.
Quoted 7 lines
Gregory CLEMENT (2):
hwrng: omap - Remove useless test beforeclk_disable_unprepare
hwrng: omap - Fix clock resource by adding a register clockDocumentation/devicetree/bindings/rng/omap_rng.txt | 7 ++++++- drivers/char/hw_random/omap-rng.c | 22 ++++++++++++++++++---- 2 files changed, 24 insertions(+), 5 deletions(-)
All applied. Thanks.
Signature · 3 lines
Email: Herbert Xu <[email protected]> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt