Skip to contentSkip to conversation

mlxsw: spectrum_switchdev: Check success of FDB add operation

PATCH In review Jiri Pirko 2 participants 2 messages Mar 1, 2018 – Mar 4, 2018

Subsystems (3)
lore
Share & tools
lore

Jiri Pirko

author
#0 lore raw

PATCH 1/1 mlxsw: spectrum_switchdev: Check success of FDB add operation

From: Shalom Toledo <[email protected]>

Until now, we assumed that in case of error when adding FDB entries, the write operation will fail, but this is not the case. Instead, we need to check that the number of entries reported in the response is equal to the number of entries specified in the request.

Fixes 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
---
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 29 ++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +27 -2
index 593ad31be749..161bcdc012f0 100644
@@ -1203,6 +1203,7 @@ static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				     bool dynamic)
 {
 	char *sfd_pl;
+	u8 num_rec;
 	int err;
 
 	sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
@@ -1212,9 +1213,16 @@ static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 	mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
 	mlxsw_reg_sfd_uc_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
 			      mac, fid, action, local_port);
+	num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
 	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
-	kfree(sfd_pl);
+	if (err)
+		goto out;
+
+	if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
+		err = -EBUSY;
 
+out:
+	kfree(sfd_pl);
 	return err;
 }
 
@@ -1239,6 +1247,7 @@ static int mlxsw_sp_port_fdb_uc_lag_op(struct mlxsw_sp *mlxsw_sp, u16 lag_id,
 				       bool adding, bool dynamic)
 {
 	char *sfd_pl;
+	u8 num_rec;
 	int err;
 
 	sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
@@ -1249,9 +1258,16 @@ static int mlxsw_sp_port_fdb_uc_lag_op(struct mlxsw_sp *mlxsw_sp, u16 lag_id,
 	mlxsw_reg_sfd_uc_lag_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
 				  mac, fid, MLXSW_REG_SFD_REC_ACTION_NOP,
 				  lag_vid, lag_id);
+	num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
 	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
-	kfree(sfd_pl);
+	if (err)
+		goto out;
+
+	if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
+		err = -EBUSY;
 
+out:
+	kfree(sfd_pl);
 	return err;
 }
 
@@ -1296,6 +1312,7 @@ static int mlxsw_sp_port_mdb_op(struct mlxsw_sp *mlxsw_sp, const char *addr,
 				u16 fid, u16 mid_idx, bool adding)
 {
 	char *sfd_pl;
+	u8 num_rec;
 	int err;
 
 	sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
@@ -1305,7 +1322,15 @@ static int mlxsw_sp_port_mdb_op(struct mlxsw_sp *mlxsw_sp, const char *addr,
 	mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
 	mlxsw_reg_sfd_mc_pack(sfd_pl, 0, addr, fid,
 			      MLXSW_REG_SFD_REC_ACTION_NOP, mid_idx);
+	num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
 	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
+	if (err)
+		goto out;
+
+	if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
+		err = -EBUSY;
+
+out:
 	kfree(sfd_pl);
 	return err;
 }
Signature · 1 line
2.14.3
maintainer
#1 lore raw

From: Jiri Pirko <[email protected]>
Date: Thu, 1 Mar 2018 11:37:05 +0100

Quoted 7 lines

From: Shalom Toledo <[email protected]>

Until now, we assumed that in case of error when adding FDB entries, the write operation will fail, but this is not the case. Instead, we need to check that the number of entries reported in the response is equal to the number of entries specified in the request.

Quoted 5 lines
Fixes 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")

Applied and queued up for -stable.