ARM: dts: amx3xx: add emif interrupt info

Hi,

Adding these two patches per the addition of required interrupt property under emif node.

See: https://patchwork.kernel.org/patch/10217053/

-Tero

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

The EMIF instance on am33xx supports interrupts, so add the info for completeness sake. Right now, the driver does not use this for anything, but it is possible it would be used in future.

---
 arch/arm/boot/dts/am33xx.dtsi | 1 +
 1 file changed, 1 insertion(+)

index 628c77b..2c09e8b 100644
@@ -945,6 +945,7 @@
 			compatible = "ti,emif-am3352";
 			reg = <0x4c000000 0x1000000>;
 			ti,hwmods = "emif";
+			interrupts = <101>;
 		};
 
 		gpmc: gpmc at 50000000 {

1.9.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

The EMIF instance on am43xx supports interrupts, so add the info for completeness sake. Right now, the driver does not use this for anything, but it is possible it would be used in future.

---
 arch/arm/boot/dts/am4372.dtsi | 1 +
 1 file changed, 1 insertion(+)

index 964f3ef..5ebf911 100644
@@ -237,6 +237,7 @@
 			compatible = "ti,emif-am4372";
 			reg = <0x4c000000 0x1000000>;
 			ti,hwmods = "emif";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		edma: edma at 49000000 {

1.9.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Applying both into omap-for-v4.17/dt thanks.

Tony