Skip to contentSkip to conversation

updates for omap2plus_defconfig

PATCH New Tony Lindgren 1 participant 12 messages Mar 1, 2018 – Mar 6, 2018

Subsystems (2)
Arm (32-bit) OMAP2+ support
lore
Share & tools
lore

Tony Lindgren

author maintainer
#0 lore raw

cover updates for omap2plus_defconfig

Hi all,

Here are some omap2plus_defconfig updates to fix up the options that have changed and would get removed with make defconfig, then to drop the unneeded options with make defconfig, and finally add some new options.

The biggest changes naturally are the switch from omap_serial to 8250_omap, and from omapfb to omapdrm. But both have been tested for several years now, so I think we can flip over to use them now.

And then we now enable the options needed for am335x and am437x PM.

Regards,

Tony

Tony Lindgren (10):
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth
ARM: omap2plus_defconfig: Select MFD_TI_LMU
ARM: omap2plus_defconfig: Update LIRC options
ARM: omap2plus_defconfig: Add SND_OSSEMUL
ARM: omap2plus_defconfig: Drop unneeded options
ARM: omap2plus_defconfig: Enable am335x and am437x PM options
ARM: omap2plus_defconfig: Enable CEC
ARM: omap2plus_defconfig: Switch to use omapdrm by default
ARM: omap2plus_defconfig: Enable 8250_OMAP

 arch/arm/configs/omap2plus_defconfig | 91 ++++++++++++++++++++----------------
 1 file changed, 52 insertions(+), 39 deletions(-)
Signature · 1 line
2.16.2
author maintainer
#1 lore raw

PATCH 1/10 ARM: omap2plus_defconfig: Update for moved options

Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)
arch/arm/configs/omap2plus_defconfig +14 -14
@@ -71,9 +71,10 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_CPUFREQ_DT=m
-CONFIG_ARM_TI_CPUFREQ=y
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_ARM_TI_CPUFREQ=y
 CONFIG_CPU_IDLE=y
+CONFIG_KERNEL_MODE_NEON=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y

@@ -314,14 +315,14 @@ CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
+CONFIG_RC_CORE=m
+CONFIG_RC_DEVICES=y
+CONFIG_IR_RX51=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_RC_CORE=m
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_LIRC=m
-CONFIG_RC_DEVICES=y
-CONFIG_IR_RX51=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

@@ -520,15 +521,6 @@ CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_KERNEL_MODE_NEON=y
 CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m

@@ -536,5 +528,13 @@ CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
Signature · 1 line
2.16.2
author maintainer
#2 lore raw

PATCH 2/10 ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth

In reply to Tony Lindgren

We now have SERIAL_DEV that at least TI WLAN devices can use.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/configs/omap2plus_defconfig +3 -0
@@ -104,9 +104,11 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_NOKIA=m
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m

@@ -248,6 +250,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
Signature · 1 line
2.16.2
author maintainer
#3 lore raw

PATCH 2/10 ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth

arch/arm/configs/omap2plus_defconfig CONFIG_SERIAL_8250_RSA=y · line 256

Quoted 11 lines · Tony Lindgren

We now have SERIAL_DEV that at least TI WLAN devices can use.

arch/arm/configs/omap2plus_defconfig +1 -0
@@ -248,6 +250,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y

This we actually want to have built-in, otherwise we don't get SERIAL_DEV_CTRL_TTYPORT. Updated patch below.

Regards,

Tony

8< -------------------

Quoted 1 line

From tony Mon Sep 17 00:00:00 2001

From: Tony Lindgren <[email protected]>
Date: Thu, 1 Mar 2018 10:47:35 -0800
Subject: [PATCH] ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth

We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/configs/omap2plus_defconfig +3 -0
@@ -104,9 +104,11 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_NOKIA=m
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m

@@ -248,6 +250,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
Signature · 1 line
2.16.2
author maintainer
#4 lore raw

PATCH 3/10 ARM: omap2plus_defconfig: Select MFD_TI_LMU

In reply to Tony Lindgren

We have REGULATOR_LM363X selected but not MFD_TI_LMU and REGULATOR_LM363X depends on MFD_TI_LMU.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -295,6 +295,7 @@ CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
 CONFIG_MFD_CPCAP=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_MFD_TI_LMU=m
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TI_LP873X=y
Signature · 1 line
2.16.2
author maintainer
#5 lore raw

PATCH 4/10 ARM: omap2plus_defconfig: Update LIRC options

In reply to Tony Lindgren

We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
arch/arm/configs/omap2plus_defconfig +4 -1
@@ -320,13 +320,16 @@ CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_RC_CORE=m
+CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
+CONFIG_IR_SPI=m
 CONFIG_IR_RX51=m
+CONFIG_IR_GPIO_TX=m
+CONFIG_IR_PWM_TX=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_LIRC=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
Signature · 1 line
2.16.2
author maintainer
#6 lore raw

PATCH 5/10 ARM: omap2plus_defconfig: Add SND_OSSEMUL

In reply to Tony Lindgren

We have SND_MIXER_OSS and SND_PCM_OSS but they now depend on SND_OSSEMUL selecting SOUND_OSS_CORE.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -369,6 +369,7 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
+CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_VERBOSE_PRINTK=y
Signature · 1 line
2.16.2
author maintainer
#7 lore raw

PATCH 6/10 ARM: omap2plus_defconfig: Drop unneeded options

In reply to Tony Lindgren

These are no longer needed because:

- PCI_DRA7XX_HOST selects PCI_DRA7XX

- USB_NET_QMI_WWAN selects USB_WDM

- USB_PHY selects EXTCON

- IIO_CONFIGFS selects CONFIGFS_FS

- TIMER_STATS option no longer exists

- CRYPTO_SHA1_ARM_NEON selects CRYPTO_SHA1_ARM

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 6 ------
 1 file changed, 6 deletions(-)
arch/arm/configs/omap2plus_defconfig +0 -6
@@ -50,7 +50,6 @@ CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_DRA7XX=y
 CONFIG_PCI_DRA7XX_EP=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y

@@ -394,7 +393,6 @@ CONFIG_USB_MON=m
 CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_WDM=m
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=m
 CONFIG_USB_MUSB_HDRC=m

@@ -471,7 +469,6 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_OMAP=y
 CONFIG_TI_EDMA=y
 CONFIG_OMAP_IOMMU=y
-CONFIG_EXTCON=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_EXTCON_USB_GPIO=m
 CONFIG_TI_EMIF=m

@@ -503,7 +500,6 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y

@@ -524,13 +520,11 @@ CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
Signature · 1 line
2.16.2
author maintainer
#8 lore raw

PATCH 7/10 ARM: omap2plus_defconfig: Enable am335x and am437x PM options

In reply to Tony Lindgren

These are needed to enable low-power suspend mode as described by Dave.

Note that these depend on the am335x-pm-firmware.elf.

Cc Dave Gerlach <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/configs/omap2plus_defconfig +7 -0
@@ -469,9 +469,16 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_OMAP=y
 CONFIG_TI_EDMA=y
 CONFIG_OMAP_IOMMU=y
+CONFIG_REMOTEPROC=m
+CONFIG_OMAP_REMOTEPROC=m
+CONFIG_WKUP_M3_RPROC=m
+CONFIG_SOC_TI=y
+CONFIG_AMX3_PM=m
+CONFIG_WKUP_M3_IPC=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_EXTCON_USB_GPIO=m
 CONFIG_TI_EMIF=m
+CONFIG_TI_EMIF_SRAM=m
 CONFIG_IIO=m
 CONFIG_IIO_SW_DEVICE=m
 CONFIG_IIO_SW_TRIGGER=m
Signature · 1 line
2.16.2
author maintainer
#9 lore raw

PATCH 8/10 ARM: omap2plus_defconfig: Enable CEC

In reply to Tony Lindgren

We have CEC support available and working so let's enable it.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/configs/omap2plus_defconfig +2 -0
@@ -327,10 +327,12 @@ CONFIG_IR_GPIO_TX=m
 CONFIG_IR_PWM_TX=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CEC_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
+CONFIG_CEC_PLATFORM_DRIVERS=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_TVP5150=m
 CONFIG_FB=y
Signature · 1 line
2.16.2
author maintainer
#10 lore raw

PATCH 9/10 ARM: omap2plus_defconfig: Switch to use omapdrm by default

In reply to Tony Lindgren

We've had omapdrm working for few years now so let's use it by default.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 39 ++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 19 deletions(-)
arch/arm/configs/omap2plus_defconfig +20 -19
@@ -335,28 +335,30 @@ CONFIG_VIDEO_OMAP3=m
 CONFIG_CEC_PLATFORM_DRIVERS=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_TVP5150=m
+CONFIG_DRM=m
+CONFIG_DRM_OMAP=m
+CONFIG_OMAP5_DSS_HDMI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_DRM_OMAP_ENCODER_OPA362=m
+CONFIG_DRM_OMAP_ENCODER_TFP410=m
+CONFIG_DRM_OMAP_ENCODER_TPD12S015=m
+CONFIG_DRM_OMAP_CONNECTOR_DVI=m
+CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
+CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
+CONFIG_DRM_OMAP_PANEL_DPI=m
+CONFIG_DRM_OMAP_PANEL_DSI_CM=m
+CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
+CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_TILCDC=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP2=m
-CONFIG_FB_OMAP5_DSS_HDMI=y
-CONFIG_FB_OMAP2_DSS_SDI=y
-CONFIG_FB_OMAP2_DSS_DSI=y
-CONFIG_FB_OMAP2_ENCODER_TFP410=m
-CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
-CONFIG_FB_OMAP2_CONNECTOR_DVI=m
-CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
-CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
-CONFIG_FB_OMAP2_PANEL_DPI=m
-CONFIG_FB_OMAP2_PANEL_DSI_CM=m
-CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
-CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
-CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y

@@ -365,7 +367,6 @@ CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_PANDORA=m
 CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
Signature · 1 line
2.16.2
author maintainer
#11 lore raw

PATCH 10/10 ARM: omap2plus_defconfig: Enable 8250_OMAP

In reply to Tony Lindgren

We've had 8250_OMAP working for few years now, so let's start enabling it by default. We provide users an option to warn by default with SERIAL_8250_OMAP_TTYO_FIXUP by default. That option updates the serial console to point to 8250 driver and warns about it.

Users with ttyO[0123] in their /etc/inittab should update inittab to use ttyS[0123] instead.

Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -246,6 +246,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_OMAP=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
Signature · 1 line
2.16.2