adis16209 driver cleanup
Subsystems (4)
cover adis16209 driver cleanup
This patchset has been introduced for the cleanup of adis16209 driver.
This patchset cleans up miscellaneous code fragments and improves the code readability.
Shreeya Patel (6):
Staging: iio: adis16209: Arrange headers in alphabetical order
Staging: iio: adis16209: Change the definition name
Staging: iio: adis16209: Add _REG postfix for registers
Staging: iio: adis16209: Remove unnecessary comments and group the
definitions
Staging: iio: adis16209: Add some informatic comments
Staging: iio: adis16209: Use sign_extend32 and adjust a switch
statement
drivers/staging/iio/accel/adis16209.c | 245 +++++++++++++--------------------- 1 file changed, 94 insertions(+), 151 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/6 Staging: iio: adis16209: Arrange headers in alphabetical order
Arrange the headers in alphabetical order for cleanup purpose.
--- drivers/staging/iio/accel/adis16209.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/iio/accel/adis16209.c +2 -2
@@ -9,11 +9,11 @@#include <linux/delay.h> #include <linux/device.h> #include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> #include <linux/spi/spi.h> #include <linux/slab.h> #include <linux/sysfs.h> -#include <linux/list.h> -#include <linux/module.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h>
Signature · 6 lines
2.7.4 _______________________________________________ devel mailing list [email protected] http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
Jonathan Cameron
maintainerRe: [PATCH 1/6] Staging: iio: adis16209: Arrange headers in alphabetical order
Quoted 4 lines · On Fri, 2 Mar 2018 18:49:23 +0530 Shreeya Patel…
Arrange the headers in alphabetical order for cleanup purpose.
Signed-off-by Shreeya Patel <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing (mostly to test other patches as I'd be really surprised if this one broke anything :)
Jonathan
Quoted 22 lines
--- drivers/staging/iio/accel/adis16209.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/staging/iio/accel/adis16209.c +2
-2@@ -9,11 +9,11 @@#include <linux/delay.h> #include <linux/device.h> #include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> #include <linux/spi/spi.h> #include <linux/slab.h> #include <linux/sysfs.h> -#include <linux/list.h> -#include <linux/module.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h>
PATCH 2/6 Staging: iio: adis16209: Change the definition name
In reply to Shreeya PatelThe change in the definition name makes it then obvious what the units are throughout the driver and there will be no need of the comment.
--- drivers/staging/iio/accel/adis16209.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/iio/accel/adis16209.c +2 -2
@@ -20,7 +20,7 @@#include <linux/iio/buffer.h> #include <linux/iio/imu/adis.h> -#define ADIS16209_STARTUP_DELAY 220/* ms */ +#define ADIS16209_STARTUP_DELAY_MS 220/* Flash memory write count */ #define ADIS16209_FLASH_CNT 0x00
@@ -303,7 +303,7 @@ static const struct adis_data adis16209_data = { .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN, .self_test_no_autoclear = true, - .startup_delay = ADIS16209_STARTUP_DELAY, + .startup_delay = ADIS16209_STARTUP_DELAY_MS, .status_error_msgs = adis16209_status_error_msgs, .status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
Signature · 1 line
2.7.4
Jonathan Cameron
maintainerRe: [PATCH 2/6] Staging: iio: adis16209: Change the definition name
Quoted 5 lines · On Fri, 2 Mar 2018 18:53:41 +0530 Shreeya Patel…
The change in the definition name makes it then obvious what the units are throughout the driver and there will be no need of the comment.
Signed-off-by Shreeya Patel <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing.
Thanks,
Jonathan
Quoted 18 lines
--- drivers/staging/iio/accel/adis16209.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/staging/iio/accel/adis16209.c +1
-1@@ -20,7 +20,7 @@#include <linux/iio/buffer.h> #include <linux/iio/imu/adis.h> -#define ADIS16209_STARTUP_DELAY 220/* ms */ +#define ADIS16209_STARTUP_DELAY_MS 220/* Flash memory write count */ #define ADIS16209_FLASH_CNT 0x00
drivers/staging/iio/accel/adis16209.c static const struct adis_data adis16209_data = { · line 309
Quoted 8 lines
drivers/staging/iio/accel/adis16209.c +1
-1@@ -303,7 +303,7 @@ static const struct adis_data adis16209_data = { .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN, .self_test_no_autoclear = true, - .startup_delay = ADIS16209_STARTUP_DELAY, + .startup_delay = ADIS16209_STARTUP_DELAY_MS, .status_error_msgs = adis16209_status_error_msgs, .status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
PATCH 3/6 Staging: iio: adis16209: Add _REG postfix for registers
In reply to Shreeya PatelThe defined names for registers does not make it very clear that they are registers and hence, add _REG postfix. This improves the readability of the code.
--- drivers/staging/iio/accel/adis16209.c | 85 ++++++++++++++++++----------------- 1 file changed, 43 insertions(+), 42 deletions(-)
drivers/staging/iio/accel/adis16209.c +43 -42
@@ -23,85 +23,85 @@#define ADIS16209_STARTUP_DELAY_MS 220/* Flash memory write count */ -#define ADIS16209_FLASH_CNT 0x00 +#define ADIS16209_FLASH_CNT_REG 0x00/* Output, power supply */ -#define ADIS16209_SUPPLY_OUT 0x02 +#define ADIS16209_SUPPLY_OUT_REG 0x02/* Output, x-axis accelerometer */ -#define ADIS16209_XACCL_OUT 0x04 +#define ADIS16209_XACCL_OUT_REG 0x04/* Output, y-axis accelerometer */ -#define ADIS16209_YACCL_OUT 0x06 +#define ADIS16209_YACCL_OUT_REG 0x06/* Output, auxiliary ADC input */ -#define ADIS16209_AUX_ADC 0x08 +#define ADIS16209_AUX_ADC_REG 0x08/* Output, temperature */ -#define ADIS16209_TEMP_OUT 0x0A +#define ADIS16209_TEMP_OUT_REG 0x0A/* Output, x-axis inclination */ -#define ADIS16209_XINCL_OUT 0x0C +#define ADIS16209_XINCL_OUT_REG 0x0C/* Output, y-axis inclination */ -#define ADIS16209_YINCL_OUT 0x0E +#define ADIS16209_YINCL_OUT_REG 0x0E/* Output, +/-180 vertical rotational position */ -#define ADIS16209_ROT_OUT 0x10 +#define ADIS16209_ROT_OUT_REG 0x10/* Calibration, x-axis acceleration offset null */ -#define ADIS16209_XACCL_NULL 0x12 +#define ADIS16209_XACCL_NULL_REG 0x12/* Calibration, y-axis acceleration offset null */ -#define ADIS16209_YACCL_NULL 0x14 +#define ADIS16209_YACCL_NULL_REG 0x14/* Calibration, x-axis inclination offset null */ -#define ADIS16209_XINCL_NULL 0x16 +#define ADIS16209_XINCL_NULL_REG 0x16/* Calibration, y-axis inclination offset null */ -#define ADIS16209_YINCL_NULL 0x18 +#define ADIS16209_YINCL_NULL_REG 0x18/* Calibration, vertical rotation offset null */ -#define ADIS16209_ROT_NULL 0x1A +#define ADIS16209_ROT_NULL_REG 0x1A/* Alarm 1 amplitude threshold */ -#define ADIS16209_ALM_MAG1 0x20 +#define ADIS16209_ALM_MAG1_REG 0x20/* Alarm 2 amplitude threshold */ -#define ADIS16209_ALM_MAG2 0x22 +#define ADIS16209_ALM_MAG2_REG 0x22/* Alarm 1, sample period */ -#define ADIS16209_ALM_SMPL1 0x24 +#define ADIS16209_ALM_SMPL1_REG 0x24/* Alarm 2, sample period */ -#define ADIS16209_ALM_SMPL2 0x26 +#define ADIS16209_ALM_SMPL2_REG 0x26/* Alarm control */ -#define ADIS16209_ALM_CTRL 0x28 +#define ADIS16209_ALM_CTRL_REG 0x28/* Auxiliary DAC data */ -#define ADIS16209_AUX_DAC 0x30 +#define ADIS16209_AUX_DAC_REG 0x30/* General-purpose digital input/output control */ -#define ADIS16209_GPIO_CTRL 0x32 +#define ADIS16209_GPIO_CTRL_REG 0x32/* Miscellaneous control */ -#define ADIS16209_MSC_CTRL 0x34 +#define ADIS16209_MSC_CTRL_REG 0x34/* Internal sample period (rate) control */ -#define ADIS16209_SMPL_PRD 0x36 +#define ADIS16209_SMPL_PRD_REG 0x36/* Operation, filter configuration */ -#define ADIS16209_AVG_CNT 0x38 +#define ADIS16209_AVG_CNT_REG 0x38/* Operation, sleep mode control */ -#define ADIS16209_SLP_CNT 0x3A +#define ADIS16209_SLP_CNT_REG 0x3A/* Diagnostics, system status register */ -#define ADIS16209_DIAG_STAT 0x3C +#define ADIS16209_DIAG_STAT_REG 0x3C/* Operation, system command register */ -#define ADIS16209_GLOB_CMD 0x3E +#define ADIS16209_GLOB_CMD_REG 0x3E/* MSC_CTRL */
@@ -165,10 +165,10 @@ enum adis16209_scan {static const u8 adis16209_addresses[8 ][1 ] = { [ADIS16209_SCAN_SUPPLY ] = { }, [ADIS16209_SCAN_AUX_ADC ] = { }, - [ADIS16209_SCAN_ACC_X ] = {ADIS16209_XACCL_NULL }, - [ADIS16209_SCAN_ACC_Y ] = {ADIS16209_YACCL_NULL }, - [ADIS16209_SCAN_INCLI_X ] = {ADIS16209_XINCL_NULL }, - [ADIS16209_SCAN_INCLI_Y ] = {ADIS16209_YINCL_NULL }, + [ADIS16209_SCAN_ACC_X ] = {ADIS16209_XACCL_NULL_REG }, + [ADIS16209_SCAN_ACC_Y ] = {ADIS16209_YACCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_X ] = {ADIS16209_XINCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_Y ] = {ADIS16209_YINCL_NULL_REG }, [ADIS16209_SCAN_ROT ] = { }, [ADIS16209_SCAN_TEMP ] = { }, };
@@ -266,18 +266,19 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, }static const struct iio_chan_spec adis16209_channels[] = { -ADIS_SUPPLY_CHAN (ADIS16209_SUPPLY_OUT ,ADIS16209_SCAN_SUPPLY ,0 ,14 ), -ADIS_TEMP_CHAN (ADIS16209_TEMP_OUT ,ADIS16209_SCAN_TEMP ,0 ,12 ), -ADIS_ACCEL_CHAN (X ,ADIS16209_XACCL_OUT ,ADIS16209_SCAN_ACC_X , +ADIS_SUPPLY_CHAN (ADIS16209_SUPPLY_OUT_REG ,ADIS16209_SCAN_SUPPLY , +0 ,14 ), +ADIS_TEMP_CHAN (ADIS16209_TEMP_OUT_REG ,ADIS16209_SCAN_TEMP ,0 ,12 ), +ADIS_ACCEL_CHAN (X ,ADIS16209_XACCL_OUT_REG ,ADIS16209_SCAN_ACC_X ,BIT (IIO_CHAN_INFO_CALIBBIAS ),0 ,14 ), -ADIS_ACCEL_CHAN (Y ,ADIS16209_YACCL_OUT ,ADIS16209_SCAN_ACC_Y , +ADIS_ACCEL_CHAN (Y ,ADIS16209_YACCL_OUT_REG ,ADIS16209_SCAN_ACC_Y ,BIT (IIO_CHAN_INFO_CALIBBIAS ),0 ,14 ), -ADIS_AUX_ADC_CHAN (ADIS16209_AUX_ADC ,ADIS16209_SCAN_AUX_ADC ,0 ,12 ), -ADIS_INCLI_CHAN (X ,ADIS16209_XINCL_OUT ,ADIS16209_SCAN_INCLI_X , +ADIS_AUX_ADC_CHAN (ADIS16209_AUX_ADC_REG ,ADIS16209_SCAN_AUX_ADC ,0 ,12 ), +ADIS_INCLI_CHAN (X ,ADIS16209_XINCL_OUT_REG ,ADIS16209_SCAN_INCLI_X ,0 ,0 ,14 ), -ADIS_INCLI_CHAN (Y ,ADIS16209_YINCL_OUT ,ADIS16209_SCAN_INCLI_Y , +ADIS_INCLI_CHAN (Y ,ADIS16209_YINCL_OUT_REG ,ADIS16209_SCAN_INCLI_Y ,0 ,0 ,14 ), -ADIS_ROT_CHAN (X ,ADIS16209_ROT_OUT ,ADIS16209_SCAN_ROT ,0 ,0 ,14 ), +ADIS_ROT_CHAN (X ,ADIS16209_ROT_OUT_REG ,ADIS16209_SCAN_ROT ,0 ,0 ,14 ),IIO_CHAN_SOFT_TIMESTAMP (8 ) };
@@ -297,9 +298,9 @@ static const char * const adis16209_status_error_msgs[] = {static const struct adis_data adis16209_data = { .read_delay =30 , - .msc_ctrl_reg =ADIS16209_MSC_CTRL , - .glob_cmd_reg =ADIS16209_GLOB_CMD , - .diag_stat_reg =ADIS16209_DIAG_STAT , + .msc_ctrl_reg =ADIS16209_MSC_CTRL_REG , + .glob_cmd_reg =ADIS16209_GLOB_CMD_REG , + .diag_stat_reg =ADIS16209_DIAG_STAT_REG , .self_test_mask =ADIS16209_MSC_CTRL_SELF_TEST_EN , .self_test_no_autoclear = true,
Signature · 1 line
2.7.4
Re: [PATCH 3/6] Staging: iio: adis16209: Add _REG postfix for registers
Quoted 5 lines · On Fri, 2 Mar 2018 18:55:56 +0530 Shreeya Patel…
The defined names for registers does not make it very clear that they are registers and hence, add
_REGpostfix. This improves the readability of the code.Signed-off-by Shreeya Patel <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing.
Thanks,
Jonathan
Quoted 167 lines
--- drivers/staging/iio/accel/adis16209.c | 85 ++++++++++++++++++----------------- 1 file changed, 43 insertions(+), 42 deletions(-)drivers/staging/iio/accel/adis16209.c +40
-39@@ -23,85 +23,85 @@#define ADIS16209_STARTUP_DELAY_MS 220/* Flash memory write count */ -#define ADIS16209_FLASH_CNT 0x00 +#define ADIS16209_FLASH_CNT_REG 0x00/* Output, power supply */ -#define ADIS16209_SUPPLY_OUT 0x02 +#define ADIS16209_SUPPLY_OUT_REG 0x02/* Output, x-axis accelerometer */ -#define ADIS16209_XACCL_OUT 0x04 +#define ADIS16209_XACCL_OUT_REG 0x04/* Output, y-axis accelerometer */ -#define ADIS16209_YACCL_OUT 0x06 +#define ADIS16209_YACCL_OUT_REG 0x06/* Output, auxiliary ADC input */ -#define ADIS16209_AUX_ADC 0x08 +#define ADIS16209_AUX_ADC_REG 0x08/* Output, temperature */ -#define ADIS16209_TEMP_OUT 0x0A +#define ADIS16209_TEMP_OUT_REG 0x0A/* Output, x-axis inclination */ -#define ADIS16209_XINCL_OUT 0x0C +#define ADIS16209_XINCL_OUT_REG 0x0C/* Output, y-axis inclination */ -#define ADIS16209_YINCL_OUT 0x0E +#define ADIS16209_YINCL_OUT_REG 0x0E/* Output, +/-180 vertical rotational position */ -#define ADIS16209_ROT_OUT 0x10 +#define ADIS16209_ROT_OUT_REG 0x10/* Calibration, x-axis acceleration offset null */ -#define ADIS16209_XACCL_NULL 0x12 +#define ADIS16209_XACCL_NULL_REG 0x12/* Calibration, y-axis acceleration offset null */ -#define ADIS16209_YACCL_NULL 0x14 +#define ADIS16209_YACCL_NULL_REG 0x14/* Calibration, x-axis inclination offset null */ -#define ADIS16209_XINCL_NULL 0x16 +#define ADIS16209_XINCL_NULL_REG 0x16/* Calibration, y-axis inclination offset null */ -#define ADIS16209_YINCL_NULL 0x18 +#define ADIS16209_YINCL_NULL_REG 0x18/* Calibration, vertical rotation offset null */ -#define ADIS16209_ROT_NULL 0x1A +#define ADIS16209_ROT_NULL_REG 0x1A/* Alarm 1 amplitude threshold */ -#define ADIS16209_ALM_MAG1 0x20 +#define ADIS16209_ALM_MAG1_REG 0x20/* Alarm 2 amplitude threshold */ -#define ADIS16209_ALM_MAG2 0x22 +#define ADIS16209_ALM_MAG2_REG 0x22/* Alarm 1, sample period */ -#define ADIS16209_ALM_SMPL1 0x24 +#define ADIS16209_ALM_SMPL1_REG 0x24/* Alarm 2, sample period */ -#define ADIS16209_ALM_SMPL2 0x26 +#define ADIS16209_ALM_SMPL2_REG 0x26/* Alarm control */ -#define ADIS16209_ALM_CTRL 0x28 +#define ADIS16209_ALM_CTRL_REG 0x28/* Auxiliary DAC data */ -#define ADIS16209_AUX_DAC 0x30 +#define ADIS16209_AUX_DAC_REG 0x30/* General-purpose digital input/output control */ -#define ADIS16209_GPIO_CTRL 0x32 +#define ADIS16209_GPIO_CTRL_REG 0x32/* Miscellaneous control */ -#define ADIS16209_MSC_CTRL 0x34 +#define ADIS16209_MSC_CTRL_REG 0x34/* Internal sample period (rate) control */ -#define ADIS16209_SMPL_PRD 0x36 +#define ADIS16209_SMPL_PRD_REG 0x36/* Operation, filter configuration */ -#define ADIS16209_AVG_CNT 0x38 +#define ADIS16209_AVG_CNT_REG 0x38/* Operation, sleep mode control */ -#define ADIS16209_SLP_CNT 0x3A +#define ADIS16209_SLP_CNT_REG 0x3A/* Diagnostics, system status register */ -#define ADIS16209_DIAG_STAT 0x3C +#define ADIS16209_DIAG_STAT_REG 0x3C/* Operation, system command register */ -#define ADIS16209_GLOB_CMD 0x3E +#define ADIS16209_GLOB_CMD_REG 0x3E/* MSC_CTRL */ @@ -165,10 +165,10 @@ enum adis16209_scan {static const u8 adis16209_addresses[8 ][1 ] = { [ADIS16209_SCAN_SUPPLY ] = { }, [ADIS16209_SCAN_AUX_ADC ] = { }, - [ADIS16209_SCAN_ACC_X ] = {ADIS16209_XACCL_NULL }, - [ADIS16209_SCAN_ACC_Y ] = {ADIS16209_YACCL_NULL }, - [ADIS16209_SCAN_INCLI_X ] = {ADIS16209_XINCL_NULL }, - [ADIS16209_SCAN_INCLI_Y ] = {ADIS16209_YINCL_NULL }, + [ADIS16209_SCAN_ACC_X ] = {ADIS16209_XACCL_NULL_REG }, + [ADIS16209_SCAN_ACC_Y ] = {ADIS16209_YACCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_X ] = {ADIS16209_XINCL_NULL_REG }, + [ADIS16209_SCAN_INCLI_Y ] = {ADIS16209_YINCL_NULL_REG }, [ADIS16209_SCAN_ROT ] = { }, [ADIS16209_SCAN_TEMP ] = { }, };@@ -266,18 +266,19 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, }static const struct iio_chan_spec adis16209_channels[] = { -ADIS_SUPPLY_CHAN (ADIS16209_SUPPLY_OUT ,ADIS16209_SCAN_SUPPLY ,0 ,14 ), -ADIS_TEMP_CHAN (ADIS16209_TEMP_OUT ,ADIS16209_SCAN_TEMP ,0 ,12 ), -ADIS_ACCEL_CHAN (X ,ADIS16209_XACCL_OUT ,ADIS16209_SCAN_ACC_X , +ADIS_SUPPLY_CHAN (ADIS16209_SUPPLY_OUT_REG ,ADIS16209_SCAN_SUPPLY , +0 ,14 ), +ADIS_TEMP_CHAN (ADIS16209_TEMP_OUT_REG ,ADIS16209_SCAN_TEMP ,0 ,12 ), +ADIS_ACCEL_CHAN (X ,ADIS16209_XACCL_OUT_REG ,ADIS16209_SCAN_ACC_X ,BIT (IIO_CHAN_INFO_CALIBBIAS ),0 ,14 ), -ADIS_ACCEL_CHAN (Y ,ADIS16209_YACCL_OUT ,ADIS16209_SCAN_ACC_Y , +ADIS_ACCEL_CHAN (Y ,ADIS16209_YACCL_OUT_REG ,ADIS16209_SCAN_ACC_Y ,BIT (IIO_CHAN_INFO_CALIBBIAS ),0 ,14 ), -ADIS_AUX_ADC_CHAN (ADIS16209_AUX_ADC ,ADIS16209_SCAN_AUX_ADC ,0 ,12 ), -ADIS_INCLI_CHAN (X ,ADIS16209_XINCL_OUT ,ADIS16209_SCAN_INCLI_X , +ADIS_AUX_ADC_CHAN (ADIS16209_AUX_ADC_REG ,ADIS16209_SCAN_AUX_ADC ,0 ,12 ), +ADIS_INCLI_CHAN (X ,ADIS16209_XINCL_OUT_REG ,ADIS16209_SCAN_INCLI_X ,0 ,0 ,14 ), -ADIS_INCLI_CHAN (Y ,ADIS16209_YINCL_OUT ,ADIS16209_SCAN_INCLI_Y , +ADIS_INCLI_CHAN (Y ,ADIS16209_YINCL_OUT_REG ,ADIS16209_SCAN_INCLI_Y ,0 ,0 ,14 ), -ADIS_ROT_CHAN (X ,ADIS16209_ROT_OUT ,ADIS16209_SCAN_ROT ,0 ,0 ,14 ), +ADIS_ROT_CHAN (X ,ADIS16209_ROT_OUT_REG ,ADIS16209_SCAN_ROT ,0 ,0 ,14 ),IIO_CHAN_SOFT_TIMESTAMP (8 ) };@@ -297,9 +298,9 @@ static const char * const adis16209_status_error_msgs[] = {static const struct adis_data adis16209_data = {
drivers/staging/iio/accel/adis16209.c static const char * const adis16209_status_error_msgs[] = { · line 306
Quoted 10 lines
drivers/staging/iio/accel/adis16209.c +3
-3.read_delay = 30, - .msc_ctrl_reg = ADIS16209_MSC_CTRL, - .glob_cmd_reg = ADIS16209_GLOB_CMD, - .diag_stat_reg = ADIS16209_DIAG_STAT, + .msc_ctrl_reg = ADIS16209_MSC_CTRL_REG, + .glob_cmd_reg = ADIS16209_GLOB_CMD_REG, + .diag_stat_reg = ADIS16209_DIAG_STAT_REG, .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN, .self_test_no_autoclear = true,
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
PATCH 4/6 Staging: iio: adis16209: Remove unnecessary comments and group the definitions
In reply to Shreeya PatelRemove some unnecessay comments and group the control register and register field macros together.
--- drivers/staging/iio/accel/adis16209.c | 116 ++++++---------------------------- 1 file changed, 19 insertions(+), 97 deletions(-)
drivers/staging/iio/accel/adis16209.c +19 -97
@@ -21,135 +21,60 @@#include <linux/iio/imu/adis.h> #define ADIS16209_STARTUP_DELAY_MS 220 - -/* Flash memory write count */ #define ADIS16209_FLASH_CNT_REG 0x00 -/* Output, power supply */ +/* Data Output Register Definitions */ #define ADIS16209_SUPPLY_OUT_REG 0x02 - -/* Output, x-axis accelerometer */ #define ADIS16209_XACCL_OUT_REG 0x04 - -/* Output, y-axis accelerometer */ #define ADIS16209_YACCL_OUT_REG 0x06 - -/* Output, auxiliary ADC input */ #define ADIS16209_AUX_ADC_REG 0x08 - -/* Output, temperature */ #define ADIS16209_TEMP_OUT_REG 0x0A - -/* Output, x-axis inclination */ #define ADIS16209_XINCL_OUT_REG 0x0C - -/* Output, y-axis inclination */ #define ADIS16209_YINCL_OUT_REG 0x0E - -/* Output, +/-180 vertical rotational position */ #define ADIS16209_ROT_OUT_REG 0x10 -/* Calibration, x-axis acceleration offset null */ +/* Calibration Register Definitions */ #define ADIS16209_XACCL_NULL_REG 0x12 - -/* Calibration, y-axis acceleration offset null */ #define ADIS16209_YACCL_NULL_REG 0x14 - -/* Calibration, x-axis inclination offset null */ #define ADIS16209_XINCL_NULL_REG 0x16 - -/* Calibration, y-axis inclination offset null */ #define ADIS16209_YINCL_NULL_REG 0x18 - -/* Calibration, vertical rotation offset null */ #define ADIS16209_ROT_NULL_REG 0x1A -/* Alarm 1 amplitude threshold */ +/* Alarm Register Definitions */ #define ADIS16209_ALM_MAG1_REG 0x20 - -/* Alarm 2 amplitude threshold */ #define ADIS16209_ALM_MAG2_REG 0x22 - -/* Alarm 1, sample period */ #define ADIS16209_ALM_SMPL1_REG 0x24 - -/* Alarm 2, sample period */ #define ADIS16209_ALM_SMPL2_REG 0x26 - -/* Alarm control */ #define ADIS16209_ALM_CTRL_REG 0x28 -/* Auxiliary DAC data */ #define ADIS16209_AUX_DAC_REG 0x30 - -/* General-purpose digital input/output control */ #define ADIS16209_GPIO_CTRL_REG 0x32 - -/* Miscellaneous control */ -#define ADIS16209_MSC_CTRL_REG 0x34 - -/* Internal sample period (rate) control */ #define ADIS16209_SMPL_PRD_REG 0x36 - -/* Operation, filter configuration */ #define ADIS16209_AVG_CNT_REG 0x38 - -/* Operation, sleep mode control */ #define ADIS16209_SLP_CNT_REG 0x3A -/* Diagnostics, system status register */ -#define ADIS16209_DIAG_STAT_REG 0x3C - -/* Operation, system command register */ -#define ADIS16209_GLOB_CMD_REG 0x3E - -/* MSC_CTRL */ - -/* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10) - -/* Self-test enable */ -#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8) - -/* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2) - -/* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1) +#define ADIS16209_MSC_CTRL_REG 0x34 +#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10) +#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8) +#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2) +#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1) +#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0) -/* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ -#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0) - -/* DIAG_STAT */ - -/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16209_DIAG_STAT_ALARM2 BIT(9) - -/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16209_DIAG_STAT_ALARM1 BIT(8) - -/* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */ +#define ADIS16209_DIAG_STAT_REG 0x3C +#define ADIS16209_DIAG_STAT_ALARM2 BIT(9) +#define ADIS16209_DIAG_STAT_ALARM1 BIT(8)#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5 - -/* SPI communications failure */ #define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3 - -/* Flash update failure */ #define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2 - -/* Power supply above 3.625 V */ #define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1 - -/* Power supply below 3.15 V */ #define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0 -/* GLOB_CMD */ - -#define ADIS16209_GLOB_CMD_SW_RESET BIT(7) -#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4) -#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1) +#define ADIS16209_GLOB_CMD_REG 0x3E +#define ADIS16209_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4) +#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1) -#define ADIS16209_ERROR_ACTIVE BIT(14) +#define ADIS16209_ERROR_ACTIVE BIT(14)enum adis16209_scan {ADIS16209_SCAN_SUPPLY ,
@@ -226,7 +151,7 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, *val2 =610500 ;/* 0.6105 mV */ return IIO_VAL_INT_PLUS_MICRO ;case IIO_TEMP : - *val =-470 ;/* -0.47 C */ + *val =-470 ; *val2 =0 ;return IIO_VAL_INT_PLUS_MICRO ;case IIO_ACCEL :
@@ -243,7 +168,7 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, }break ;case IIO_CHAN_INFO_OFFSET : - *val =25000 /-470 -0x4FE ;/* 25 C = 0x4FE */ + *val =25000 /-470 -0x4FE ;return IIO_VAL_INT ;case IIO_CHAN_INFO_CALIBBIAS :switch (chan->type) {
@@ -320,12 +245,10 @@ static int adis16209_probe(struct spi_device *spi)struct adis *st;struct iio_dev *indio_dev; -/* setup the industrialio driver allocated elements */ indio_dev =devm_iio_device_alloc (&spi->dev,sizeof (*st));if (!indio_dev)return -ENOMEM ; st =iio_priv (indio_dev); -/* this is only used for removal purposes */ spi_set_drvdata (spi, indio_dev); indio_dev->name = spi->dev.driver->name;
@@ -342,7 +265,6 @@ static int adis16209_probe(struct spi_device *spi)if (ret)return ret; -/* Get the device into a sane initial state */ ret =adis_initial_startup (st);if (ret) goto error_cleanup_buffer_trigger;
Signature · 1 line
2.7.4
Jonathan Cameron
maintainerRe: [PATCH 4/6] Staging: iio: adis16209: Remove unnecessary comments and group the definitions
Quoted 4 lines · On Fri, 2 Mar 2018 18:58:55 +0530 Shreeya Patel…
Remove some unnecessay comments and group the control register and register field macros together.
Signed-off-by Shreeya Patel <[email protected]>
Hi Shreeya,
Nice patch.
As you have probably already seen comment removal (and addition) is always open to debate. I think a few of the removed comments are useful and should remain or in one or two cases be expanded to become useful.
In other cases a slight tweak to the name of the define makes it self explanatory.
Thanks,
Jonathan
Quoted 30 lines
--- drivers/staging/iio/accel/adis16209.c | 116 ++++++---------------------------- 1 file changed, 19 insertions(+), 97 deletions(-)drivers/staging/iio/accel/adis16209.c +1
-11@@ -21,135 +21,60 @@#include <linux/iio/imu/adis.h> #define ADIS16209_STARTUP_DELAY_MS 220 - -/* Flash memory write count */ #define ADIS16209_FLASH_CNT_REG 0x00 -/* Output, power supply */ +/* Data Output Register Definitions */ #define ADIS16209_SUPPLY_OUT_REG 0x02 - -/* Output, x-axis accelerometer */ #define ADIS16209_XACCL_OUT_REG 0x04 - -/* Output, y-axis accelerometer */ #define ADIS16209_YACCL_OUT_REG 0x06 - -/* Output, auxiliary ADC input */ #define ADIS16209_AUX_ADC_REG 0x08 - -/* Output, temperature */
drivers/staging/iio/accel/adis16209.c line 34
Quoted 10 lines
drivers/staging/iio/accel/adis16209.c +0
-6#define ADIS16209_TEMP_OUT_REG 0x0A - -/* Output, x-axis inclination */ #define ADIS16209_XINCL_OUT_REG 0x0C - -/* Output, y-axis inclination */ #define ADIS16209_YINCL_OUT_REG 0x0E - -/* Output, +/-180 vertical rotational position */ #define ADIS16209_ROT_OUT_REG 0x10
This one is 'odd' enough I think it is worth keeping some sort of description...
Quoted 65 lines
drivers/staging/iio/accel/adis16209.c +2
-44-/* Calibration, x-axis acceleration offset null */ +/* Calibration Register Definitions */ #define ADIS16209_XACCL_NULL_REG 0x12 - -/* Calibration, y-axis acceleration offset null */ #define ADIS16209_YACCL_NULL_REG 0x14 - -/* Calibration, x-axis inclination offset null */ #define ADIS16209_XINCL_NULL_REG 0x16 - -/* Calibration, y-axis inclination offset null */ #define ADIS16209_YINCL_NULL_REG 0x18 - -/* Calibration, vertical rotation offset null */ #define ADIS16209_ROT_NULL_REG 0x1A -/* Alarm 1 amplitude threshold */ +/* Alarm Register Definitions */ #define ADIS16209_ALM_MAG1_REG 0x20 - -/* Alarm 2 amplitude threshold */ #define ADIS16209_ALM_MAG2_REG 0x22 - -/* Alarm 1, sample period */ #define ADIS16209_ALM_SMPL1_REG 0x24 - -/* Alarm 2, sample period */ #define ADIS16209_ALM_SMPL2_REG 0x26 - -/* Alarm control */ #define ADIS16209_ALM_CTRL_REG 0x28 -/* Auxiliary DAC data */ #define ADIS16209_AUX_DAC_REG 0x30 - -/* General-purpose digital input/output control */ #define ADIS16209_GPIO_CTRL_REG 0x32 - -/* Miscellaneous control */ -#define ADIS16209_MSC_CTRL_REG 0x34 - -/* Internal sample period (rate) control */ #define ADIS16209_SMPL_PRD_REG 0x36 - -/* Operation, filter configuration */ #define ADIS16209_AVG_CNT_REG 0x38 - -/* Operation, sleep mode control */ #define ADIS16209_SLP_CNT_REG 0x3A -/* Diagnostics, system status register */ -#define ADIS16209_DIAG_STAT_REG 0x3C - -/* Operation, system command register */ -#define ADIS16209_GLOB_CMD_REG 0x3E - -/* MSC_CTRL */ - -/* Self-test at power-on: 1 = disabled, 0 = enabled */ -#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10) - -/* Self-test enable */ -#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8) -
drivers/staging/iio/accel/adis16209.c line 60
Quoted 10 lines
drivers/staging/iio/accel/adis16209.c +5
-5-/* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2) - -/* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1) +#define ADIS16209_MSC_CTRL_REG 0x34 +#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST BIT(10) +#define ADIS16209_MSC_CTRL_SELF_TEST_EN BIT(8) +#define ADIS16209_MSC_CTRL_DATA_RDY_EN BIT(2) +#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
This one isn't named well enough to make it obvious what it is controlling. Either leave the comment or tweak the anme to something like:
ADIS16209_MSC_CTRL_DATA_RDY_ACTIVE_HIGH
Quoted 14 lines
drivers/staging/iio/accel/adis16209.c +1
-12+#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0) -/* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ -#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0) - -/* DIAG_STAT */ - -/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16209_DIAG_STAT_ALARM2 BIT(9) - -/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16209_DIAG_STAT_ALARM1 BIT(8) - -/* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */
drivers/staging/iio/accel/adis16209.c line 68
Quoted 10 lines
drivers/staging/iio/accel/adis16209.c +3
-4+#define ADIS16209_DIAG_STAT_REG 0x3C +#define ADIS16209_DIAG_STAT_ALARM2 BIT(9) +#define ADIS16209_DIAG_STAT_ALARM1 BIT(8)#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5 - -/* SPI communications failure */ #define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3 - -/* Flash update failure */ #define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2
Another question I had earlier was about this bit so I'll give the same comment here. It's really not well named (as was pointed out to me!) as it reflects a failure and the name doesn't imply this.
There is also the curious point that the register is called simply STATUS on the data sheet (not DIAG stat).
All this family have subtly different naming for somethings (presumably it evolved over time) but that name is nicer than the DIAG_STAT naming to my mind so perhaps worth a change?
drivers/staging/iio/accel/adis16209.c line 69
Quoted 3 lines
drivers/staging/iio/accel/adis16209.c +0
-2- -/* Power supply above 3.625 V */ #define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1
This comment conveys meaning not expressed in the
name so I would keep it (same with the next one).
drivers/staging/iio/accel/adis16209.c line 72
Quoted 10 lines
drivers/staging/iio/accel/adis16209.c +1
-7- -/* Power supply below 3.15 V */ #define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0 -/* GLOB_CMD */ - -#define ADIS16209_GLOB_CMD_SW_RESET BIT(7) -#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4) -#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1) +#define ADIS16209_GLOB_CMD_REG 0x3E
This one is interesting. I have no idea where the naming GLOB_CMD came from given it's COMMAND on the current data sheet.
Current naming is pretty clear though I guess so up to you on whether you want to change it.
Quoted 19 lines
drivers/staging/iio/accel/adis16209.c +5
-2+#define ADIS16209_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4) +#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1) -#define ADIS16209_ERROR_ACTIVE BIT(14) +#define ADIS16209_ERROR_ACTIVE BIT(14)enum adis16209_scan {ADIS16209_SCAN_SUPPLY ,@@ -226,7 +151,7 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, *val2 =610500 ;/* 0.6105 mV */ return IIO_VAL_INT_PLUS_MICRO ;case IIO_TEMP : - *val =-470 ;/* -0.47 C */ + *val =-470 ; *val2 =0 ;return IIO_VAL_INT_PLUS_MICRO ;case IIO_ACCEL :
drivers/staging/iio/accel/adis16209.c static int adis16209_read_raw(struct iio_dev *indio_dev, · line 171
Quoted 5 lines
drivers/staging/iio/accel/adis16209.c +1
-1@@ -243,7 +168,7 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, }break ;case IIO_CHAN_INFO_OFFSET : - *val =25000 /-470 -0x4FE ;/* 25 C = 0x4FE */ + *val =25000 /-470 -0x4FE ;
Whilst I don't like the existing comment, I do feel that some explanation of the logic here would be useful.
Perhaps something like:
/*
* The raw ADC value is 0x4FE when the temperature is 45 degrees and
* the scale factor per milli degree C is -470.
*/
Quoted 17 lines
drivers/staging/iio/accel/adis16209.c +0
-2return IIO_VAL_INT ;case IIO_CHAN_INFO_CALIBBIAS :switch (chan->type) {@@ -320,12 +245,10 @@ static int adis16209_probe(struct spi_device *spi)struct adis *st;struct iio_dev *indio_dev; -/* setup the industrialio driver allocated elements */ indio_dev =devm_iio_device_alloc (&spi->dev,sizeof (*st));if (!indio_dev)return -ENOMEM ; st =iio_priv (indio_dev); -/* this is only used for removal purposes */ spi_set_drvdata (spi, indio_dev); indio_dev->name = spi->dev.driver->name;
drivers/staging/iio/accel/adis16209.c static int adis16209_probe(struct spi_device *spi) · line 270
Quoted 7 lines
drivers/staging/iio/accel/adis16209.c +0
-1@@ -342,7 +265,6 @@ static int adis16209_probe(struct spi_device *spi)if (ret)return ret; -/* Get the device into a sane initial state */ ret =adis_initial_startup (st);if (ret) goto error_cleanup_buffer_trigger;
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
PATCH 5/6 Staging: iio: adis16209: Add some informatic comments
In reply to Shreeya PatelSome of the register names does not make it's puporse very clear and hence, add some comments for more information.
Also there are certain unit based comments which are not providing sufficient information, so expand those comments.
--- drivers/staging/iio/accel/adis16209.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
drivers/staging/iio/accel/adis16209.c +18 -3
@@ -27,13 +27,18 @@#define ADIS16209_SUPPLY_OUT_REG 0x02#define ADIS16209_XACCL_OUT_REG 0x04#define ADIS16209_YACCL_OUT_REG 0x06 +/* Output, auxiliary ADC */ #define ADIS16209_AUX_ADC_REG 0x08 +/* Output, temperature */ #define ADIS16209_TEMP_OUT_REG 0x0A +/* Output, +/- 90 degrees X-axis inclination */ #define ADIS16209_XINCL_OUT_REG 0x0C#define ADIS16209_YINCL_OUT_REG 0x0E#define ADIS16209_ROT_OUT_REG 0x10 -/* Calibration Register Definitions */ +/* Calibration Register Definitions. +* Acceleration, inclination or rotation offset null. +*/ #define ADIS16209_XACCL_NULL_REG 0x12#define ADIS16209_YACCL_NULL_REG 0x14#define ADIS16209_XINCL_NULL_REG 0x16
@@ -155,19 +160,29 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, *val2 =0 ;return IIO_VAL_INT_PLUS_MICRO ;case IIO_ACCEL : +/* +* IIO base unit for sensitivity of accelerometer +* is milligram. +* 1 LSB represents 0.244 milligrams. +*/ *val =0 ; - *val2 =IIO_G_TO_M_S_2 (244140 );/* 0.244140 mg */ + *val2 =IIO_G_TO_M_S_2 (244140 );return IIO_VAL_INT_PLUS_NANO ;case IIO_INCLI :case IIO_ROT : +/* +* IIO base units for rotation are degrees. +* 1 LSB represents 0.025 milli degrees. +*/ *val =0 ; - *val2 =25000 ;/* 0.025 degree */ + *val2 =25000 ;return IIO_VAL_INT_PLUS_MICRO ;default :return -EINVAL ; }break ;case IIO_CHAN_INFO_OFFSET : +/* TEMP_OUT_REG has a scale factor of -0.47 degrees celcius. */ *val =25000 /-470 -0x4FE ;return IIO_VAL_INT ;case IIO_CHAN_INFO_CALIBBIAS :
Signature · 1 line
2.7.4
Jonathan Cameron
maintainerRe: [PATCH 5/6] Staging: iio: adis16209: Add some informatic comments
Quoted 5 lines · On Fri, 2 Mar 2018 19:02:48 +0530 Shreeya Patel…
Some of the register names does not make it's puporse very clear and hence, add some comments for more information.
Also there are certain unit based comments which are not providing sufficient information, so expand those comments.
Ah - serves me right for not reading on before commenting on the previous patch. It would have been preferable to have merged at least some of this in there as they needed to be read together.
One comment in here doesn't quite cover everything I think should be explained.
Please fix that and merge this down with the previous patch (interactive rebase and marking it as a fixup makes this easy).
Thanks,
Jonathan
Quoted 31 lines
Signed-off-by Shreeya Patel <[email protected]>--- drivers/staging/iio/accel/adis16209.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)drivers/staging/iio/accel/adis16209.c +6
-1@@ -27,13 +27,18 @@#define ADIS16209_SUPPLY_OUT_REG 0x02#define ADIS16209_XACCL_OUT_REG 0x04#define ADIS16209_YACCL_OUT_REG 0x06 +/* Output, auxiliary ADC */ #define ADIS16209_AUX_ADC_REG 0x08 +/* Output, temperature */ #define ADIS16209_TEMP_OUT_REG 0x0A +/* Output, +/- 90 degrees X-axis inclination */ #define ADIS16209_XINCL_OUT_REG 0x0C#define ADIS16209_YINCL_OUT_REG 0x0E#define ADIS16209_ROT_OUT_REG 0x10 -/* Calibration Register Definitions */ +/* Calibration Register Definitions. +* Acceleration, inclination or rotation offset null. +*/ #define ADIS16209_XACCL_NULL_REG 0x12#define ADIS16209_YACCL_NULL_REG 0x14#define ADIS16209_XINCL_NULL_REG 0x16
drivers/staging/iio/accel/adis16209.c static int adis16209_read_raw(struct iio_dev *indio_dev, · line 166
Quoted 7 lines
drivers/staging/iio/accel/adis16209.c +4
-0@@ -155,19 +160,29 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, *val2 =0 ;return IIO_VAL_INT_PLUS_MICRO ;case IIO_ACCEL : +/* +* IIO base unit for sensitivity of accelerometer +* is milligram. +* 1 LSB represents 0.244 milligrams.
Not miligrams. Milli g where 1 g is the 'standard' acceleration due to gravity.
Quoted 11 lines
drivers/staging/iio/accel/adis16209.c +6
-1+*/ *val =0 ; - *val2 =IIO_G_TO_M_S_2 (244140 );/* 0.244140 mg */ + *val2 =IIO_G_TO_M_S_2 (244140 );return IIO_VAL_INT_PLUS_NANO ;case IIO_INCLI :case IIO_ROT : +/* +* IIO base units for rotation are degrees. +* 1 LSB represents 0.025 milli degrees. +*/
drivers/staging/iio/accel/adis16209.c static int adis16209_read_raw(struct iio_dev *indio_dev, · line 185
Quoted 10 lines
drivers/staging/iio/accel/adis16209.c +2
-1*val =0 ; - *val2 =25000 ;/* 0.025 degree */ + *val2 =25000 ;return IIO_VAL_INT_PLUS_MICRO ;default :return -EINVAL ; }break ;case IIO_CHAN_INFO_OFFSET : +/* TEMP_OUT_REG has a scale factor of -0.47 degrees celcius. */
This doesn't explain the magic 0x4FE so that needs doing as well.
drivers/staging/iio/accel/adis16209.c static int adis16209_read_raw(struct iio_dev *indio_dev, · line 188
Quoted 3 lines
drivers/staging/iio/accel/adis16209.c +0
-0*val =25000 /-470 -0x4FE ;return IIO_VAL_INT ;case IIO_CHAN_INFO_CALIBBIAS :
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
Re: [PATCH 5/6] Staging: iio: adis16209: Add some informatic comments
Quoted 61 lines · Jonathan Cameron
Quoted 6 lines · On Fri, 2 Mar 2018 19:02:48 +0530 Shreeya Patel…
Some of the register names does not make it's puporse very clear and hence, add some comments for more information.
Also there are certain unit based comments which are not providing sufficient information, so expand those comments.Ah - serves me right for not reading on before commenting on the previous
patch. It would have been preferable to have merged at least some of this
in there as they needed to be read together.One comment in here doesn't quite cover everything I think should be explained.
Please fix that and merge this down with the previous patch (interactive rebase and marking it as a fixup makes this easy).
Thanks,
Jonathan
Quoted 36 lines
Signed-off-by Shreeya Patel <[email protected]>---
drivers/staging/iio/accel/adis16209.c | 21 ++++++++++++++++++---1 file changed, 18 insertions(+), 3 deletions(-)drivers/staging/iio/accel/adis16209.c +3
-0@@ -27,13 +27,18 @@ #define ADIS16209_SUPPLY_OUT_REG 0x02 #define ADIS16209_XACCL_OUT_REG 0x04 #define ADIS16209_YACCL_OUT_REG 0x06 +/* Output, auxiliary ADC */ #define ADIS16209_AUX_ADC_REG 0x08 +/* Output, temperature */ #define ADIS16209_TEMP_OUT_REG 0x0A +/* Output, +/- 90 degrees X-axis inclination */ #define ADIS16209_XINCL_OUT_REG 0x0C #define ADIS16209_YINCL_OUT_REG 0x0E #define ADIS16209_ROT_OUT_REG 0x10drivers/staging/iio/accel/adis16209.c +3
-1-/* Calibration Register Definitions */ +/* Calibration Register Definitions. +* Acceleration, inclination or rotation offset null. +*/ #define
ADIS16209_XACCL_NULL_REG0x12
#defineADIS16209_YACCL_NULL_REG0x14
#defineADIS16209_XINCL_NULL_REG0x16drivers/staging/iio/accel/adis16209.c +0
-0@@ -155,19 +160,29 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, *val2 = 0; return IIO_VAL_INT_PLUS_MICRO;
Quoted 8 lines
drivers/staging/iio/accel/adis16209.c static int adis16209_read_raw(struct iio_dev *indio_dev, · line 166
Quoted 6 lines
case
IIO_ACCEL:drivers/staging/iio/accel/adis16209.c +2
-0+/* +* IIO base unit for sensitivity of accelerometer
drivers/staging/iio/accel/adis16209.c +2
-0+ * is milligram. + * 1 LSB represents 0.244 milligrams.Not miligrams. Milli g where 1 g is the 'standard' acceleration due to gravity.
Ah!!
Should have used my common sense here :(
Sorry for such mistake.
Quoted 32 lines
Quoted 25 lines
drivers/staging/iio/accel/adis16209.c +1
-0+*/ *val = 0;
drivers/staging/iio/accel/adis16209.c +0
-1- *val2 =IIO_G_TO_M_S_2 (244140 );/* 0.244140 mg */
drivers/staging/iio/accel/adis16209.c +1
-0+ *val2 =IIO_G_TO_M_S_2 (244140 );return
IIO_VAL_INT_PLUS_NANO; caseIIO_INCLI:
caseIIO_ROT:drivers/staging/iio/accel/adis16209.c +2
-0+/* +* IIO base units for rotation are degrees.
drivers/staging/iio/accel/adis16209.c +2
-0+* 1 LSB represents 0.025 milli degrees. +*/ *val = 0;
drivers/staging/iio/accel/adis16209.c +1
-1- *val2 =25000 ;/* 0.025 degree */ + *val2 =25000 ;return
IIO_VAL_INT_PLUS_MICRO; default:
return-EINVAL;
}
break;
caseIIO_CHAN_INFO_OFFSET:drivers/staging/iio/accel/adis16209.c +1
-0+/* TEMP_OUT_REG has a scale factor of -0.47 Quoted 1 line
degrees celcius. */
This doesn't explain the magic
0x4FEso that needs doing as well.Quoted 4 lines
*val = 25000 / -470 -
0x4FE;
returnIIO_VAL_INT;
caseIIO_CHAN_INFO_CALIBBIAS:
PATCH 6/6 Staging: iio: adis16209: Use sign_extend32 and adjust a switch statement
In reply to Shreeya PatelUse sign_extend32 function instead of manually coding it. Also, adjust a switch block to explicitly match channels and return -EINVAL as default case which makes the code semantically more clear.
--- drivers/staging/iio/accel/adis16209.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/staging/iio/accel/adis16209.c +10 -5
@@ -150,10 +150,16 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,switch (chan->type) {case IIO_VOLTAGE : *val =0 ; -if (chan->channel ==0 ) +switch (chan->channel) { +case 0 : *val2 =305180 ;/* 0.30518 mV */ -else +break ; +case 1 : *val2 =610500 ;/* 0.6105 mV */ +break ; +default : +return -EINVAL ; + }return IIO_VAL_INT_PLUS_MICRO ;case IIO_TEMP : *val =-470 ;
@@ -197,9 +203,8 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, ret =adis_read_reg_16 (st, addr, &val16);if (ret)return ret; - val16 &= (1 << bits) -1 ; - val16 = (s16)(val16 << (16 - bits)) >> (16 - bits); - *val = val16; + + *val =sign_extend32 (val16, bits -1 );return IIO_VAL_INT ; }return -EINVAL ;
Signature · 1 line
2.7.4
Jonathan Cameron
maintainerRe: [PATCH 6/6] Staging: iio: adis16209: Use sign_extend32 and adjust a switch statement
Quoted 6 lines · On Fri, 2 Mar 2018 19:04:49 +0530 Shreeya Patel…
Use
sign_extend32function instead of manually coding it. Also, adjust a switch block to explicitly match channels and return-EINVALas default case which makes the code semantically more clear.Signed-off-by Shreeya Patel <[email protected]>
Changes are fine, but 2 changes to different things should be in 2 patches. Please split. I'd probably have taken this anyway if it hadn't been queued behind the requested changes to the previous 2 patches anyway.
Good work on this series though so looking forward to v3. Note please mark the set as [PATCH v3] to make it clear it is the 3rd version of some of this.
Quoted 29 lines
--- drivers/staging/iio/accel/adis16209.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)drivers/staging/iio/accel/adis16209.c +8
-2@@ -150,10 +150,16 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,switch (chan->type) {case IIO_VOLTAGE : *val =0 ; -if (chan->channel ==0 ) +switch (chan->channel) { +case 0 : *val2 =305180 ;/* 0.30518 mV */ -else +break ; +case 1 : *val2 =610500 ;/* 0.6105 mV */ +break ; +default : +return -EINVAL ; + }return IIO_VAL_INT_PLUS_MICRO ;case IIO_TEMP : *val =-470 ;@@ -197,9 +203,8 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, ret =adis_read_reg_16 (st, addr, &val16);
drivers/staging/iio/accel/adis16209.c static int adis16209_read_raw(struct iio_dev *indio_dev, · line 210
Quoted 10 lines
drivers/staging/iio/accel/adis16209.c +2
-3if (ret)return ret; - val16 &= (1 << bits) -1 ; - val16 = (s16)(val16 << (16 - bits)) >> (16 - bits); - *val = val16; + + *val =sign_extend32 (val16, bits -1 );return IIO_VAL_INT ; }return -EINVAL ;
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
Re: [PATCH 6/6] Staging: iio: adis16209: Use sign_extend32 and adjust a switch statement
Quoted 10 lines · Jonathan Cameron
Quoted 7 lines · On Fri, 2 Mar 2018 19:04:49 +0530 Shreeya Patel…
Use
sign_extend32function instead of manually coding it. Also, adjust a switch block to explicitly match channels and return-EINVALas default case which makes the code semantically more clear.Signed-off-by Shreeya Patel <[email protected]>
Quoted 8 lines
Changes are fine, but 2 changes to different things should be in 2 patches. Please split. I'd probably have taken this anyway if it hadn't been queued behind the requested changes to the previous 2 patches anyway.
Good work on this series though so looking forward to v3. Note please mark the set as [PATCH v3] to make it clear it is the 3rd version of some of this.
Yes, I'll do the changes.
Do I need to include the patches which have been merged from this series in v3?
Thanks
Quoted 45 lines
Quoted 45 lines
---
drivers/staging/iio/accel/adis16209.c | 15 ++++++++++-----1 file changed, 10 insertions(+), 5 deletions(-)drivers/staging/iio/accel/adis16209.c +0
-0@@ -150,10 +150,16 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, switch (chan->type) {case
IIO_VOLTAGE:
*val = 0;drivers/staging/iio/accel/adis16209.c +2
-1-if (chan->channel ==0 ) +switch (chan->channel) { +case 0 :*val2 = 305180; /* 0.30518 mV */
drivers/staging/iio/accel/adis16209.c +2
-1-else +break ; +case 1 :*val2 = 610500; /* 0.6105 mV */
drivers/staging/iio/accel/adis16209.c +4
-0+break ; +default : +return -EINVAL ; + }return
IIO_VAL_INT_PLUS_MICRO; caseIIO_TEMP:
*val = -470;drivers/staging/iio/accel/adis16209.c +2
-3@@ -197,9 +203,8 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, ret = adis_read_reg_16(st, addr, &val16); if (ret) return ret; - val16 &= (1 << bits) -1 ; - val16 = (s16)(val16 << (16 - bits)) >> (16 - bits); - *val = val16; + + *val =sign_extend32 (val16, bits -1 ); return IIO_VAL_INT;}
return-EINVAL;
Jonathan Cameron
maintainerRe: [PATCH 6/6] Staging: iio: adis16209: Use sign_extend32 and adjust a switch statement
Quoted 16 lines · On Sat, 03 Mar 2018 21:07:53 +0530 Shreeya Patel…
Quoted 15 lines · Jonathan Cameron
Quoted 7 lines · On Fri, 2 Mar 2018 19:04:49 +0530 Shreeya Patel…
Use
sign_extend32function instead of manually coding it. Also, adjust a switch block to explicitly match channels and return-EINVALas default case which makes the code semantically more clear.Signed-off-by Shreeya Patel <[email protected]>Changes are fine, but 2 changes to different things should be in 2 patches. Please split. I'd probably have taken this anyway if it hadn't been queued behind the requested changes to the previous 2 patches anyway.
Quoted 9 lines
Quoted 3 lines
Good work on this series though so looking forward to v3. Note please mark the set as [PATCH v3] to make it clear it is the 3rd version of some of this.
Yes, I'll do the changes.
Do I need to include the patches which have been merged from this series in v3?
No, just the ones that haven't merged yet.
Thanks,
Jonathan
Quoted 42 lines
Thanks
Quoted 41 lines
Quoted 41 lines
---
drivers/staging/iio/accel/adis16209.c | 15 ++++++++++-----1 file changed, 10 insertions(+), 5 deletions(-)drivers/staging/iio/accel/adis16209.c +0
-0@@ -150,10 +150,16 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, switch (chan->type) {case
IIO_VOLTAGE:
*val = 0;drivers/staging/iio/accel/adis16209.c +2
-1-if (chan->channel ==0 ) +switch (chan->channel) { +case 0 :*val2 = 305180; /* 0.30518 mV */
drivers/staging/iio/accel/adis16209.c +2
-1-else +break ; +case 1 :*val2 = 610500; /* 0.6105 mV */
drivers/staging/iio/accel/adis16209.c +4
-0+break ; +default : +return -EINVAL ; + }return
IIO_VAL_INT_PLUS_MICRO; caseIIO_TEMP:
*val = -470;drivers/staging/iio/accel/adis16209.c +1
-3@@ -197,9 +203,8 @@ static int adis16209_read_raw(struct iio_dev *indio_dev, ret = adis_read_reg_16(st, addr, &val16); if (ret) return ret; - val16 &= (1 << bits) -1 ; - val16 = (s16)(val16 << (16 - bits)) >> (16 - bits); - *val = val16; +
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
drivers/staging/iio/accel/adis16209.c +1
-0+ *val =sign_extend32 (val16, bits -1 ); return IIO_VAL_INT;}
return-EINVAL;--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel