Skip to contentSkip to conversation

imx: board: Add support for the K+P's kp_imx6q_tpc board

PATCH New Lukasz Majewski 1 participant 2 messages Mar 7, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 imx: board: Add support for the K+P's kp_imx6q_tpc board

This commit provides support for Kieback & Peter GmbH IMX6Q based TPC board.

---

 arch/arm/mach-imx/mx6/Kconfig             |  11 ++
 board/k+p/kp_imx6q_tpc/Kconfig            |  12 ++
 board/k+p/kp_imx6q_tpc/MAINTAINERS        |   6 +
 board/k+p/kp_imx6q_tpc/Makefile           |  11 ++
 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c     | 302 ++++++++++++++++++++++++++++++
 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 283 ++++++++++++++++++++++++++++
 configs/kp_imx6q_tpc_defconfig            |  48 +++++
 include/configs/kp_imx6q_tpc.h            | 133 +++++++++++++
 8 files changed, 806 insertions(+)
 create mode 100644 board/k+p/kp_imx6q_tpc/Kconfig
 create mode 100644 board/k+p/kp_imx6q_tpc/MAINTAINERS
 create mode 100644 board/k+p/kp_imx6q_tpc/Makefile
 create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
 create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
 create mode 100644 configs/kp_imx6q_tpc_defconfig
 create mode 100644 include/configs/kp_imx6q_tpc.h
arch/arm/mach-imx/mx6/Kconfig +11 -0
index 2f3e52d624..8b0e3e78bf 100644
@@ -388,6 +388,16 @@ config TARGET_TBS2910
 config TARGET_TITANIUM
 	bool "titanium"
 
+config TARGET_KP_IMX6Q_TPC
+	bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
+	select MX6QDL
+	select BOARD_LATE_INIT
+	select BOARD_EARLY_INIT_F
+	select SUPPORT_SPL
+	select DM
+	select DM_THERMAL
+	imply CMD_SPL
+
 config TARGET_TQMA6
 	bool "TQ Systems TQMa6 board"
 	select BOARD_LATE_INIT
@@ -494,6 +504,7 @@ source "board/tbs/tbs2910/Kconfig"
 source "board/tqc/tqma6/Kconfig"
 source "board/toradex/apalis_imx6/Kconfig"
 source "board/toradex/colibri_imx6/Kconfig"
+source "board/k+p/kp_imx6q_tpc/Kconfig"
 source "board/udoo/Kconfig"
 source "board/udoo/neo/Kconfig"
 source "board/wandboard/Kconfig"
board/k+p/kp_imx6q_tpc/Kconfig new file +12 -0
new file mode 100644
index 0000000000..62e34978ec
@@ -0,0 +1,12 @@
+if TARGET_KP_IMX6Q_TPC
+
+config SYS_BOARD
+	default "kp_imx6q_tpc"
+
+config SYS_VENDOR
+	default "k+p"
+
+config SYS_CONFIG_NAME
+	default "kp_imx6q_tpc"
+
+endif
board/k+p/kp_imx6q_tpc/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..6c4c8dd28e
@@ -0,0 +1,6 @@
+KP_IMX6Q_TPC BOARD
+M:	Lukasz Majewski <[email protected]>
+S:	Maintained
+F:	board/k+p/kp_imx6q_tpc/
+F:	include/configs/kp_imx6q_tpc.h
+F:	configs/kp_imx6q_tpc_defconfig
board/k+p/kp_imx6q_tpc/Makefile new file +11 -0
new file mode 100644
index 0000000000..51cbd3e843
@@ -0,0 +1,11 @@
+#
+# Copyright (C) 2018 Lukasz Majewski <[email protected]>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y	:= kp_imx6q_tpc_spl.o
+else
+obj-y	:= kp_imx6q_tpc.o
+endif
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c new file +302 -0

302 lines not on this page · raw message

board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c new file +283 -0

283 lines not on this page · raw message

configs/kp_imx6q_tpc_defconfig new file +48 -0

48 lines not on this page · raw message

include/configs/kp_imx6q_tpc.h new file +133 -0

133 lines not on this page · raw message

Signature · 1 line
2.11.0
#1 lore raw

PATCH 2/2 boot: script: The boot.scr file for K+P's boards

By using this file one can avoid cluttering <board>.h file with u-boot HUSH commands necessary for booting target device.

With such approach the commands are stored only in one place and can be reused if needed.

---

 board/k+p/bootscripts/tpcboot.cmd | 96 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)
 create mode 100644 board/k+p/bootscripts/tpcboot.cmd
board/k+p/bootscripts/tpcboot.cmd new file +96 -0
new file mode 100644
index 0000000000..f6d59a1186
@@ -0,0 +1,96 @@
+#
+# Copyright (C) 2018
+# Lukasz Majewski, DENX Software Engineering, lukma at denx.de
+#
+#
+# This is an example file to generate boot.scr - a boot script for U-Boot
+# Generate boot.scr:
+# ./tools/mkimage -c none -A arm -T script -d tpcboot.cmd boot.scr
+#
+# SPDX-License-Identifier:	GPL-2.0+
+
+
+# Input envs (to be set in environment)
+# Mandatory:
+# kernel_file = "fitImage"
+# boardname = "XXXX"  // set automatically in u-boot
+# boardsoc = "imx6q"  // set automatically in u-boot
+#
+# Optional:
+# bootcmd_force = "nfs" "tftp_kernel"
+# If not set - eMMC/SD boot
+
+# Generic setup
+setenv mmcroot "/dev/mmcblk${devnum}p2 rootwait rw"
+setenv displayargs ""
+setenv mmcargs "setenv bootargs console=${console} ${smp} root=${mmcroot} \
+	${displayargs}"
+setenv boot_fitImage "
+	setenv fdt_conf 'conf@${boardsoc}-${boardname}.dtb';
+	setenv itbcfg "\"#\${fdt_conf}\"";
+	print itbcfg;
+	bootm '${loadaddr}${itbcfg}';"
+
+#------------------------------------------------------------
+#
+# Provide default 'bootcmd' command
+#------------------------------------------------------------
+setenv bootcmd "
+if test -e ${devtype} ${devnum}:${distro_bootpart} ${kernel_file}; then
+	echo Found kernel image: ${kernel_file};
+	if load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} \
+	   ${kernel_file}; then
+		run mmcargs;
+		run boot_fitImage;
+	fi;
+fi;"
+
+#------------------------------------------------------------
+#
+# Provide 'boot_tftp_kernel' command
+#------------------------------------------------------------
+setenv download_kernel "tftpboot ${loadaddr} ${kernel_file}"
+
+setenv boot_tftp_kernel "
+if run download_kernel; then
+	run mmcargs;
+	run boot_fitImage;
+fi"
+
+#------------------------------------------------------------
+#
+# Provide 'boot_nfs' command
+#------------------------------------------------------------
+setenv rootpath "/srv/tftp/KP/rootfs"
+setenv nfsargs "setenv bootargs root=/dev/nfs rw \
+       nfsroot=${serverip}:${rootpath},nolock,nfsvers=3"
+setenv addip "setenv bootargs ${bootargs} \
+       ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:\
+       ${hostname}:eth0:on"
+
+setenv boot_nfs "
+if run download_kernel; then
+	run nfsargs;
+	run addip;
+	setenv bootargs ${bootargs} console=${console};
+
+	run boot_fitImage;
+fi"
+
+#------------------------------------------------------------
+#
+# Set correct boot flow
+#------------------------------------------------------------
+
+setenv bcmd "
+if test ! -n ${bootcmd_force}; then
+	run bootcmd;
+fi;
+if test ${bootcmd_force} = nfs; then
+	run boot_nfs;
+else if test ${bootcmd_force} = tftp_kernel; then
+	run boot_tftp_kernel;
+     fi;
+fi"
+
+run bcmd
Signature · 1 line
2.11.0