expat: refresh patches

index 3d3c5bad9d6..104717eabb7 100644
@@ -10,11 +10,12 @@ Updated to apply over expat 2.1.0
 
 Signed-off-by: Marko Lindqvist <[email protected]>
 
-diff -Nurd expat-2.1.0/configure.in expat-2.1.0/configure.in
---- expat-2.1.0/configure.ac	2012-03-04 01:45:53.000000000 +0200
-+++ expat-2.1.0/configure.ac	2012-05-10 21:04:44.000000000 +0300
-@@ -51,8 +51,6 @@
- 
+Index: expat-2.2.5/configure.ac
+===================================================================
+--- expat-2.2.5.orig/configure.ac
++++ expat-2.2.5/configure.ac
+@@ -53,8 +53,6 @@ LIBAGE=6       # CMakeLists.txt!
+ CPPFLAGS="${CPPFLAGS} -DHAVE_EXPAT_CONFIG_H"
  AC_CONFIG_HEADER(expat_config.h)
  
 -sinclude(conftools/ac_c_bigendian_cross.m4)

index 935c472cf8f..ffc2d40d893 100644
@@ -43,19 +43,16 @@ Signed-off-by: Hongxu Jia <[email protected]>
  grub-core/genmod.sh.in | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/grub-core/genmod.sh.in b/grub-core/genmod.sh.in
-index 76df0bb..39a9cfc 100644
---- a/grub-core/genmod.sh.in
-+++ b/grub-core/genmod.sh.in
-@@ -59,7 +59,7 @@ if test x@TARGET_APPLE_CC@ != x1; then
+Index: grub-2.02/grub-core/genmod.sh.in
+===================================================================
+--- grub-2.02.orig/grub-core/genmod.sh.in
++++ grub-2.02/grub-core/genmod.sh.in
+@@ -56,7 +56,7 @@ if test x@TARGET_APPLE_LINKER@ != x1; th
  	if test x@platform@ != xemu; then
- 	    @STRIP@ --strip-unneeded \
+ 	    @TARGET_STRIP@ --strip-unneeded \
  		-K grub_mod_init -K grub_mod_fini \
 -		-K _grub_mod_init -K _grub_mod_fini \
 +		-K _grub_mod_init -K _grub_mod_fini -K .module_license \
  		-R .note.gnu.gold-version -R .note.GNU-stack \
- 		-R .note -R .comment $tmpfile || exit 1
+ 		-R .note -R .comment -R .ARM.exidx $tmpfile || exit 1
  	fi
--- 
-2.8.1
-

index 3c9f1ea438c..262ff7562ce 100644
@@ -8,16 +8,18 @@ Upstream-Status: Pending
 
 Signed-off-by: Joe Slater <[email protected]>
 
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -44,7 +44,9 @@ $(pkgconfig_DATA): config.status
- @INTLTOOL_XML_RULE@
- @INTLTOOL_DESKTOP_RULE@
+Index: shared-mime-info-1.9/Makefile.am
+===================================================================
+--- shared-mime-info-1.9.orig/Makefile.am
++++ shared-mime-info-1.9/Makefile.am
+@@ -50,7 +50,9 @@ else
+   update_mime_database="$(top_builddir)/update-mime-database$(EXEEXT)"
+ endif
  
 -install-data-hook: install-binPROGRAMS
 +# do NOT make this dependent on anything!
 +#
 +install-data-hook:
  if ENABLE_UPDATE_MIMEDB
- 	$(DESTDIR)"$(bindir)/update-mime-database" -V "$(DESTDIR)$(datadir)/mime"
+ 	$(update_mime_database) -V "$(DESTDIR)$(datadir)/mime"
  endif

index 84c4d03731b..fea34a55a25 100644
@@ -11,17 +11,17 @@ RP 10/10/2011
 Upstream-Status: Pending
 Signed-off-by: Constantin Musca <[email protected]>
 
-Index: shared-mime-info-1.0/Makefile.am
+Index: shared-mime-info-1.9/Makefile.am
 ===================================================================
---- shared-mime-info-1.0.orig/Makefile.am
-+++ shared-mime-info-1.0/Makefile.am
+--- shared-mime-info-1.9.orig/Makefile.am
++++ shared-mime-info-1.9/Makefile.am
 @@ -1,5 +1,3 @@
 -SUBDIRS=. po
 -
  AM_CPPFLAGS = $(ALL_CFLAGS)
  
  packagesdir = $(datadir)/mime/packages
-@@ -72,8 +70,7 @@ uninstall-hook:
+@@ -81,8 +79,7 @@ endif
  
  all: $(defaultmakedeps)
  

@@ -29,5 +29,5 @@ Index: shared-mime-info-1.0/Makefile.am
 -	$(AM_V_GEN) $(MAKE) -C po shared-mime-info.pot
 +create-pot: po
  
- check: create-pot freedesktop.org.xml update-mime-database check-translations
- 	if test -e $(top_builddir)/freedesktop.org.xml; then \
+ local-test: create-pot freedesktop.org.xml update-mime-database$(EXEEXT)
+ if CROSS_COMPILING

index 380f5d00d2d..c392444f7b3 100644
@@ -5,11 +5,11 @@ Upstream-Status: Inappropriate
 
 RP 2014/7/17
 
-Index: serf-1.3.6/SConstruct
+Index: serf-1.3.9/SConstruct
 ===================================================================
---- serf-1.3.6.orig/SConstruct	2014-07-17 19:57:57.724389150 +0000
-+++ serf-1.3.6/SConstruct	2014-07-17 20:04:21.784399616 +0000
-@@ -218,8 +218,7 @@
+--- serf-1.3.9.orig/SConstruct
++++ serf-1.3.9/SConstruct
+@@ -224,8 +224,7 @@ if sys.platform != 'win32':
  else:
    LIBNAMESTATIC = 'serf-${MAJOR}'
  

@@ -17,9 +17,9 @@ Index: serf-1.3.6/SConstruct
 -           PDB='${TARGET.filebase}.pdb')
 +env.Append(PDB='${TARGET.filebase}.pdb')
  
- #for i in env:
- #    print(str(env[i]))
-@@ -371,12 +370,6 @@
+ if sys.platform == 'darwin':
+ #  linkflags.append('-Wl,-install_name,@executable_path/%s.dylib' % (LIBNAME,))
+@@ -385,12 +384,6 @@ if gssapi and CALLOUT_OKAY:
  if sys.platform == 'win32':
    env.Append(CPPDEFINES=['SERF_HAVE_SSPI'])
  

@@ -32,8 +32,8 @@ Index: serf-1.3.6/SConstruct
  # Set up the construction of serf-*.pc
  pkgconfig = env.Textfile('serf-%d.pc' % (MAJOR,),
                           env.File('build/serf.pc.in'),
-@@ -446,7 +439,6 @@
-                           ENV={'PATH' : os.environ['PATH']}))
+@@ -461,7 +454,6 @@ else:
+   TEST_EXES = [ os.path.join('test', '%s' % (prog)) for prog in TEST_PROGRAMS ]
  
  # Find the (dynamic) library in this directory
 -tenv.Replace(RPATH=thisdir)

index c2b7258e50e..f12acc85480 100644
@@ -49,4 +49,4 @@ Index: nspr/configure.in
 -            PR_MD_ASFILES=os_Linux_ppc.s
          fi
          ;;
-     m68k)
+     esac    

index a7e7853de1a..ecc6d31874a 100644
@@ -11,12 +11,12 @@ in file {builddir}/tmp/work/armv5te-poky-linux-gnueabi/nspr-4.8.9-r1/packages-sp
 Signed-off-by: Andrei Gherzan <[email protected]>
 Upstream-Status: Pending
 
-Index: nspr-4.8.9/mozilla/nsprpub/pr/tests/Makefile.in
+Index: nspr/pr/tests/Makefile.in
 ===================================================================
---- nsprpub.orig/pr/tests/Makefile.in	2012-02-11 00:01:10.476220505 +0200
-+++ nsprpub/pr/tests/Makefile.in	2012-02-10 23:57:40.000000000 +0200
-@@ -379,7 +379,7 @@
- endif
+--- nspr.orig/pr/tests/Makefile.in
++++ nspr/pr/tests/Makefile.in
+@@ -315,7 +315,7 @@ ifeq ($(OS_ARCH), SunOS)
+ endif # SunOS
  
  ifeq (,$(filter-out Linux GNU GNU_%,$(OS_ARCH)))
 -    LDOPTS += -Xlinker -rpath $(ABSOLUTE_LIB_DIR)

index c5c0cb076e6..b50f50e7017 100644
@@ -14,11 +14,11 @@ Signed-off-by: Jussi Kukkonen <[email protected]>
  CMakeLists.txt | 3 +--
  1 file changed, 1 insertion(+), 2 deletions(-)
 
-diff --git a/CMakeLists.txt b/CMakeLists.txt
-index d5aad80..5cc9863 100644
---- a/CMakeLists.txt
-+++ b/CMakeLists.txt
-@@ -91,8 +91,7 @@ if(SHARED_ONLY)
+Index: libical-2.0.0/CMakeLists.txt
+===================================================================
+--- libical-2.0.0.orig/CMakeLists.txt
++++ libical-2.0.0/CMakeLists.txt
+@@ -116,8 +116,7 @@ if(SHARED_ONLY)
    set(LIBRARY_TYPE SHARED)
  endif()
  

@@ -26,8 +26,5 @@ index d5aad80..5cc9863 100644
 -find_package(Perl REQUIRED)
 +set(PERL_EXECUTABLE perl)
  
- # MSVC specific definitions
- if(WIN32)
--- 
-2.1.4
-
+ # Ensure finding 64bit libs when using 64-bit compilers
+ if(CMAKE_CL_64)

index 665367658bc..1e47924ccc7 100644
@@ -18,13 +18,13 @@ Upstream-Status: Inappropriate[OE-Specific]
  configure.ac | 11 -----------
  1 file changed, 11 deletions(-)
 
-diff --git a/configure.ac b/configure.ac
-index 857ea3b..359e919 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -607,15 +607,6 @@ case $host in
-     GMP_INCLUDE_MPN(arm/arm-defs.m4)
-     CALLING_CONVENTIONS_OBJS='arm32call.lo arm32check.lo'
+Index: gmp-6.1.2/configure.ac
+===================================================================
+--- gmp-6.1.2.orig/configure.ac
++++ gmp-6.1.2/configure.ac
+@@ -604,15 +604,6 @@ case $host in
+     any_32_testlist="sizeof-long-4"
+     any_64_testlist="sizeof-long-8"
  
 -    # This is needed for clang, which is not content with flags like -mfpu=neon
 -    # alone.

@@ -38,7 +38,7 @@ index 857ea3b..359e919 100644
      # FIXME: We make mandatory compiler options optional here.  We should
      # either enforce them, or organise to strip paths as the corresponding
      # options fail.
-@@ -686,8 +677,6 @@ case $host in
+@@ -746,8 +737,6 @@ case $host in
  	;;
        *)
  	path="arm"

@@ -47,6 +47,3 @@ index 857ea3b..359e919 100644
  	;;
      esac
      ;;
--- 
-1.9.1
-

index 564d12d42b9..3935589f8b2 100644
@@ -1,10 +1,10 @@
 Upstream-Status: Pending
 
-Index: gmp-5.0.3/longlong.h
+Index: gmp-6.1.2/longlong.h
 ===================================================================
---- gmp-5.0.3.orig/longlong.h
-+++ gmp-5.0.3/longlong.h
-@@ -994,8 +994,10 @@ extern UWtype __MPN(udiv_qrnnd) _PROTO (
+--- gmp-6.1.2.orig/longlong.h
++++ gmp-6.1.2/longlong.h
+@@ -1036,8 +1036,10 @@ extern UWtype __MPN(udiv_qrnnd) (UWtype
     count is only an int. */
  #define count_trailing_zeros(count, x)					\
    do {									\

@@ -14,5 +14,5 @@ Index: gmp-5.0.3/longlong.h
 +    __asm__ ("bsfq %1,%0" : "=r" (__cbtmp) : "rm" ((UDItype)(x)));	\
 +    (count) = __cbtmp;							\
    } while (0)
- #endif /* x86_64 */
+ #endif /* __amd64__ */
  

index 74904a25302..6b089cf39c2 100644
@@ -1,15 +1,15 @@
 Upstream-Status: Pending
 
-Index: gmp-4.2.4/Makefile.am
+Index: gmp-6.1.2/Makefile.am
 ===================================================================
---- gmp-4.2.4.orig/Makefile.am	2008-09-10 19:31:27.000000000 +0000
-+++ gmp-4.2.4/Makefile.am	2009-07-06 20:19:19.000000000 +0000
-@@ -106,7 +106,7 @@
- # but anyone knowledgable enough to be playing with exec_prefix will be able
+--- gmp-6.1.2.orig/Makefile.am
++++ gmp-6.1.2/Makefile.am
+@@ -130,7 +130,7 @@ EXTRA_DIST += gmpxx.h
+ # but anyone knowledgeable enough to be playing with exec_prefix will be able
  # to address that.
  #
 -includeexecdir = $(exec_prefix)/include
 +includeexecdir = $(includedir)
  include_HEADERS = $(GMPXX_HEADERS_OPTION)
- nodist_includeexec_HEADERS = gmp.h $(MPBSD_HEADERS_OPTION)
- lib_LTLIBRARIES = libgmp.la $(GMPXX_LTLIBRARIES_OPTION) $(MPBSD_LTLIBRARIES_OPTION)
+ nodist_includeexec_HEADERS = gmp.h
+ lib_LTLIBRARIES = libgmp.la $(GMPXX_LTLIBRARIES_OPTION)

index f0b7ca2ec84..b6e7bc96504 100644
@@ -14,19 +14,16 @@ Signed-off-by: Alexander Kanavin <[email protected]>
  configure.ac | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/configure.ac b/configure.ac
-index 6907b21..7c70d9e 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -948,7 +948,7 @@ YEAR=`date +%Y`
+Index: gnutls-3.5.16/configure.ac
+===================================================================
+--- gnutls-3.5.16.orig/configure.ac
++++ gnutls-3.5.16/configure.ac
+@@ -955,7 +955,7 @@ YEAR=`date +%Y`
  AC_SUBST([YEAR], $YEAR)
  
  for i in ${srcdir}/src/*-args.c.bak ${srcdir}/src/*-args.h.bak; do
 -	nam=$(basename $i|sed 's/.bak//g')
 +	nam=$(basename $i|sed 's/\.bak$//')
  	if test "$create_libopts_links" = "yes";then
+ 		rm -f "src/$nam.stamp"
  		rm -f "src/$nam"
- 		AC_CONFIG_LINKS([src/$nam:$i])
--- 
-2.11.0
-

index 1e90125edd7..80c40a4742d 100644
@@ -11,12 +11,16 @@ As this block is generally pointless, disable it.
 Upstream-Status: Inappropriate
 Signed-off-by: Ross Burton <[email protected]>
 
---- a/configure.ac~	2014-11-12 11:56:51.000000000 +0000
-+++ b/configure.ac	2016-02-04 14:02:53.765710532 +0000
-@@ -593,5 +593,5 @@
+Index: libffi-3.2.1/configure.ac
+===================================================================
+--- libffi-3.2.1.orig/configure.ac
++++ libffi-3.2.1/configure.ac
+@@ -592,7 +592,7 @@ AC_ARG_ENABLE(purify-safety,
+ 
  # These variables are only ever used when we cross-build to X86_WIN32.
  # And we only support this with GCC, so...
 -if test "x$GCC" = "xyes"; then
 +if false; then
    if test -n "$with_cross_host" &&
-      test x"$with_cross_host" != x"no"; then
\ No newline at end of file
+      test x"$with_cross_host" != x"no"; then
+     toolexecdir="${exec_prefix}"/'$(target_alias)'

index d28dfd9ebeb..5afe6de923f 100644
@@ -6,13 +6,13 @@ They think pkgconfig adds no portability and maintaining them is not worthwhile.
 
 Signed-off-by: Chen Qi <[email protected]>
 
-Index: libksba-1.3.0/Makefile.am
+Index: libksba-1.3.5/Makefile.am
 ===================================================================
---- libksba-1.3.0.orig/Makefile.am	2014-05-13 21:39:22.390385646 +0000
-+++ libksba-1.3.0/Makefile.am	2014-05-13 21:39:22.462385646 +0000
-@@ -21,6 +21,9 @@
+--- libksba-1.3.5.orig/Makefile.am
++++ libksba-1.3.5/Makefile.am
+@@ -20,6 +20,9 @@
+ 
  ACLOCAL_AMFLAGS = -I m4 -I gl/m4
- AUTOMAKE_OPTIONS = dist-bzip2 no-dist-gzip
  
 +pkgconfigdir = ${libdir}/pkgconfig
 +pkgconfig_DATA = ksba.pc

@@ -20,11 +20,11 @@ Index: libksba-1.3.0/Makefile.am
  # (A suitable gitlog-to-changelog script can be found in GnuPG master.)
  GITLOG_TO_CHANGELOG=gitlog-to-changelog
  
-Index: libksba-1.3.0/configure.ac
+Index: libksba-1.3.5/configure.ac
 ===================================================================
---- libksba-1.3.0.orig/configure.ac	2014-05-13 21:39:22.390385646 +0000
-+++ libksba-1.3.0/configure.ac	2014-05-13 21:39:22.462385646 +0000
-@@ -400,6 +400,7 @@
+--- libksba-1.3.5.orig/configure.ac
++++ libksba-1.3.5/configure.ac
+@@ -414,6 +414,7 @@ gl/Makefile
  src/Makefile
  src/ksba-config
  src/versioninfo.rc

@@ -32,10 +32,10 @@ Index: libksba-1.3.0/configure.ac
  tests/Makefile
  doc/Makefile
  ])
-Index: libksba-1.3.0/ksba.pc.in
+Index: libksba-1.3.5/ksba.pc.in
 ===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ libksba-1.3.0/ksba.pc.in	2014-05-13 21:39:22.462385646 +0000
+--- /dev/null
++++ libksba-1.3.5/ksba.pc.in
 @@ -0,0 +1,17 @@
 +prefix=@prefix@
 +exec_prefix=@exec_prefix@

@@ -54,11 +54,11 @@ Index: libksba-1.3.0/ksba.pc.in
 +Libs.private: -L${libdir} -lgpg-error
 +Cflags: -I${includedir}
 +
-Index: libksba-1.3.0/src/ksba.m4
+Index: libksba-1.3.5/src/ksba.m4
 ===================================================================
---- libksba-1.3.0.orig/src/ksba.m4	2014-05-13 21:39:22.390385646 +0000
-+++ libksba-1.3.0/src/ksba.m4	2014-05-13 21:49:03.650382696 +0000
-@@ -22,18 +22,7 @@
+--- libksba-1.3.5.orig/src/ksba.m4
++++ libksba-1.3.5/src/ksba.m4
+@@ -22,18 +22,7 @@ dnl with a changed API.
  dnl
  AC_DEFUN([AM_PATH_KSBA],
  [AC_REQUIRE([AC_CANONICAL_HOST])

@@ -77,7 +77,7 @@ Index: libksba-1.3.0/src/ksba.m4
    tmp=ifelse([$1], ,1:1.0.0,$1)
    if echo "$tmp" | grep ':' >/dev/null 2>/dev/null ; then
       req_ksba_api=`echo "$tmp"     | sed 's/\(.*\):\(.*\)/\1/'`
-@@ -43,48 +32,13 @@
+@@ -43,48 +32,13 @@ AC_DEFUN([AM_PATH_KSBA],
       min_ksba_version="$tmp"
    fi
  

@@ -129,7 +129,7 @@ Index: libksba-1.3.0/src/ksba.m4
          if test "$tmp" -gt 0 ; then
             AC_MSG_CHECKING([KSBA API version])
             if test "$req_ksba_api" -eq "$tmp" ; then
-@@ -97,10 +51,8 @@
+@@ -97,10 +51,8 @@ AC_DEFUN([AM_PATH_KSBA],
       fi
    fi
    if test $ok = yes; then

@@ -141,7 +141,7 @@ Index: libksba-1.3.0/src/ksba.m4
      if test x"$libksba_config_host" != xnone ; then
        if test x"$libksba_config_host" != x"$host" ; then
    AC_MSG_WARN([[
-@@ -114,8 +66,6 @@
+@@ -114,8 +66,6 @@ AC_DEFUN([AM_PATH_KSBA],
        fi
      fi
    else

index 457202eae50..4798e470719 100644
@@ -4,13 +4,13 @@ Upstream-Status: Inappropriate [configuration]
  configure.ac |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-Index: tiff-3.9.5/configure.ac
+Index: tiff-4.0.8/configure.ac
 ===================================================================
---- tiff-3.9.5.orig/configure.ac
-+++ tiff-3.9.5/configure.ac
+--- tiff-4.0.8.orig/configure.ac
++++ tiff-4.0.8/configure.ac
 @@ -27,7 +27,7 @@ dnl Process this file with autoconf to p
  AC_PREREQ(2.64)
- AC_INIT([LibTIFF Software],[3.9.5],[[email protected]],[tiff])
+ AC_INIT([LibTIFF Software],[4.0.8],[[email protected]],[tiff])
  AC_CONFIG_AUX_DIR(config)
 -AC_CONFIG_MACRO_DIR(m4)
 +dnl AC_CONFIG_MACRO_DIR(m4)

index d52afd5d57b..ad863298938 100644
@@ -18,11 +18,11 @@ Signed-off-by: Wenzong Fan <[email protected]>
  configure.ac |   23 +++++++++++++++++------
  1 file changed, 17 insertions(+), 6 deletions(-)
 
-diff --git a/configure.ac b/configure.ac
-index 0e95c5c..12153b4 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -1901,6 +1901,15 @@ AG_GST_CHECK_FEATURE(CHROMAPRINT, [chromaprint], chromaprint, [
+Index: gst-plugins-bad-1.12.3/configure.ac
+===================================================================
+--- gst-plugins-bad-1.12.3.orig/configure.ac
++++ gst-plugins-bad-1.12.3/configure.ac
+@@ -2139,6 +2139,15 @@ AG_GST_CHECK_FEATURE(CHROMAPRINT, [chrom
  ])
  
  dnl *** Curl ***

@@ -37,8 +37,8 @@ index 0e95c5c..12153b4 100644
 +
  translit(dnm, m, l) AM_CONDITIONAL(USE_CURL, true)
  AG_GST_CHECK_FEATURE(CURL, [Curl plugin], curl, [
-   PKG_CHECK_MODULES(CURL, libcurl >= 7.21.0, [
-@@ -1915,12 +1924,14 @@ AG_GST_CHECK_FEATURE(CURL, [Curl plugin], curl, [
+   PKG_CHECK_MODULES(CURL, libcurl >= 7.35.0, [
+@@ -2161,12 +2170,14 @@ AG_GST_CHECK_FEATURE(CURL, [Curl plugin]
    ])
    AC_SUBST(CURL_CFLAGS)
    AC_SUBST(CURL_LIBS)

@@ -59,6 +59,3 @@ index 0e95c5c..12153b4 100644
    AM_CONDITIONAL(USE_SSH2, test "x$HAVE_SSH2" = "xyes")
    AC_SUBST(SSH2_CFLAGS)
    AC_SUBST(SSH2_LIBS)
--- 
-1.7.9.5
-

264 lines not on this page · raw message

index feafcb9b7c6..5f45fce932e 100644
@@ -11,10 +11,10 @@ Upstream-Status: Inappropriate (disable feature incompatible with ptest)
  configure.ac | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/configure.ac b/configure.ac
-index eb0f9d1..a539968 100644
---- a/configure.ac
-+++ b/configure.ac
+Index: git/configure.ac
+===================================================================
+--- git.orig/configure.ac
++++ git/configure.ac
 @@ -14,7 +14,7 @@ AC_USE_SYSTEM_EXTENSIONS
  AC_SYS_LARGEFILE
  AC_PREFIX_DEFAULT([/usr])

@@ -23,7 +23,4 @@ index eb0f9d1..a539968 100644
 +AM_INIT_AUTOMAKE([check-news foreign 1.11 silent-rules tar-pax no-dist-gzip dist-xz subdir-objects color-tests serial-tests])
  AM_SILENT_RULES([yes])
  LT_INIT([disable-static pic-only])
- 
--- 
-1.9.1
-
+ DOLT

index 8161d6128d3..5d9d40c387f 100644
@@ -18,12 +18,12 @@ Upstream-Status: Pending
  libkmod/libkmod-internal.h |    4 ++++
  1 file changed, 4 insertions(+)
 
-diff --git a/libkmod/libkmod-internal.h b/libkmod/libkmod-internal.h
-index 0180124..100b40f 100644
---- a/libkmod/libkmod-internal.h
-+++ b/libkmod/libkmod-internal.h
-@@ -9,6 +9,10 @@
- #include "macro.h"
+Index: git/libkmod/libkmod-internal.h
+===================================================================
+--- git.orig/libkmod/libkmod-internal.h
++++ git/libkmod/libkmod-internal.h
+@@ -10,6 +10,10 @@
+ 
  #include "libkmod.h"
  
 +#ifndef O_CLOEXEC

@@ -33,6 +33,3 @@ index 0180124..100b40f 100644
  static _always_inline_ _printf_format_(2, 3) void
  	kmod_log_null(struct kmod_ctx *ctx, const char *format, ...) {}
  
--- 
-1.7.10.4
-

index 1120617e7be..ccf17b38fdb 100644
@@ -2,11 +2,11 @@ Upstream-Status: Inappropriate [configuration]
 
 Index: git/Makefile
 ===================================================================
---- git.orig/Makefile	2011-11-02 14:52:17.243104779 -0700
-+++ git/Makefile	2011-11-02 15:06:01.555104982 -0700
-@@ -161,8 +161,8 @@
- 	$(INSTALL) -d $(DESTDIR)$(BINDIR)
- 	$(INSTALL) $(BIN) $(SCRIPTS) $(DESTDIR)$(BINDIR)
+--- git.orig/Makefile
++++ git/Makefile
+@@ -168,8 +168,8 @@ install-bin: all $(SCRIPTS)
+ install-lib: all
+ 	@$(VECHO) INSTALL-LIB
  	$(INSTALL) -d $(DESTDIR)$(LIBDIR)
 -	$(INSTALL) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)
 -	ln -sf $(notdir $(LIBFDT_lib)) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)

@@ -14,4 +14,4 @@ Index: git/Makefile
 +	ln -sf $(LIBFDT_soname) $(DESTDIR)$(LIBDIR)/$(notdir $(LIBFDT_lib))
  	ln -sf $(LIBFDT_soname) $(DESTDIR)$(LIBDIR)/libfdt.$(SHAREDLIB_EXT)
  	$(INSTALL) -m 644 $(LIBFDT_archive) $(DESTDIR)$(LIBDIR)
- 	$(INSTALL) -d $(DESTDIR)$(INCLUDEDIR)
+ 

index 0f18c5d9f1b..bff852799d0 100644
@@ -6,13 +6,12 @@ recipe anyway.
 
 Signed-off-by: Tom Zanussi <[email protected]>
 
-Index: doc/Makefile.am
+Index: lttng-ust-2.9.1/doc/Makefile.am
 ===================================================================
---- a/doc/Makefile.am
-+++ b/doc/Makefile.am
-@@ -1,4 +1,4 @@
+--- lttng-ust-2.9.1.orig/doc/Makefile.am
++++ lttng-ust-2.9.1/doc/Makefile.am
+@@ -1,3 +1,3 @@
 -SUBDIRS = . man examples
 +SUBDIRS = . man
  
- dist_man_MANS = man/lttng-gen-tp.1 \
- 	man/lttng-ust.3 \
+ dist_doc_DATA = java-agent.txt

index 9fb12522843..ad3526d9845 100644
@@ -21,8 +21,7 @@ Index: wayland-1.14.0/src/wayland-scanner.pc.in
 ===================================================================
 --- wayland-1.14.0.orig/src/wayland-scanner.pc.in
 +++ wayland-1.14.0/src/wayland-scanner.pc.in
-@@ -1,8 +1,8 @@
- prefix=@prefix@
+@@ -2,7 +2,7 @@ prefix=@prefix@
  exec_prefix=@exec_prefix@
  datarootdir=@datarootdir@
  pkgdatadir=@datadir@/@PACKAGE@

index e2213aca60c..0671a450442 100644
@@ -16,9 +16,11 @@ Upstream-Status: Submitted
  3 files changed, 23 insertions(+), 1 deletion(-)
  create mode 100644 src/weston-error.h
 
---- a/configure.ac
-+++ b/configure.ac
-@@ -60,6 +60,8 @@ AC_CHECK_DECL(CLOCK_MONOTONIC,[],
+Index: weston-3.0.0/configure.ac
+===================================================================
+--- weston-3.0.0.orig/configure.ac
++++ weston-3.0.0/configure.ac
+@@ -103,6 +103,8 @@ AC_CHECK_DECL(CLOCK_MONOTONIC,[],
  	      [[#include <time.h>]])
  AC_CHECK_HEADERS([execinfo.h])
  

@@ -26,9 +28,11 @@ Upstream-Status: Submitted
 +
  AC_CHECK_FUNCS([mkostemp strchrnul initgroups posix_fallocate])
  
- COMPOSITOR_MODULES="wayland-server >= $WAYLAND_PREREQ_VERSION pixman-1 >= 0.25.2"
+ # check for libdrm as a build-time dependency only
+Index: weston-3.0.0/libweston/weston-error.h
+===================================================================
 --- /dev/null
-+++ b/libweston/weston-error.h
++++ weston-3.0.0/libweston/weston-error.h
 @@ -0,0 +1,20 @@
 +#ifndef _WESTON_ERROR_H
 +#define _WESTON_ERROR_H

@@ -50,8 +54,10 @@ Upstream-Status: Submitted
 +
 +#endif
 +
---- a/libweston/weston-launch.c
-+++ b/libweston/weston-launch.c
+Index: weston-3.0.0/libweston/weston-launch.c
+===================================================================
+--- weston-3.0.0.orig/libweston/weston-launch.c
++++ weston-3.0.0/libweston/weston-launch.c
 @@ -33,7 +33,6 @@
  #include <poll.h>
  #include <errno.h>

@@ -60,7 +66,7 @@ Upstream-Status: Submitted
  #include <getopt.h>
  
  #include <sys/types.h>
-@@ -59,6 +58,7 @@
+@@ -60,6 +59,7 @@
  #endif
  
  #include "weston-launch.h"

index 3b6a70ef0a7..ce9ab3a2489 100644
@@ -3,11 +3,11 @@ Install the examples to $libdir/clutter/.
 Signed-off-by: Ross Burton <[email protected]>
 Upstream-Status: Inappropriate
 
-diff --git a/examples/Makefile.am b/examples/Makefile.am
-index 4b9b449..232cd19 100644
---- a/examples/Makefile.am
-+++ b/examples/Makefile.am
-@@ -38,6 +38,7 @@ AM_CPPFLAGS = \
+Index: clutter-1.26.2/examples/Makefile.am
+===================================================================
+--- clutter-1.26.2.orig/examples/Makefile.am
++++ clutter-1.26.2/examples/Makefile.am
+@@ -33,7 +33,8 @@ AM_CPPFLAGS = \
  	-I$(top_srcdir)/clutter \
  	-I$(top_builddir)/clutter
  

@@ -16,3 +16,4 @@ index 4b9b449..232cd19 100644
 +example_PROGRAMS = $(all_examples)
  
  EXTRA_DIST = redhand.png
+ 

index 97d13a30df8..a97c7b72fac 100644
@@ -4,11 +4,11 @@ Upstream-Status: Pending
 
 Rebase for 1.2.1 by: Yu Ke <[email protected]>
 
-diff --git a/configure.ac b/configure.ac
-index 81c3ae4..26601bf 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -52,11 +52,15 @@ PKG_CHECK_MODULES(SET_XEXT, xext,
+Index: xset-1.2.3/configure.ac
+===================================================================
+--- xset-1.2.3.orig/configure.ac
++++ xset-1.2.3/configure.ac
+@@ -53,11 +53,15 @@ PKG_CHECK_MODULES(SET_XEXT, xext,
  	AC_CHECK_HEADERS([X11/extensions/dpms.h X11/extensions/MITMisc.h],,,[#include <X11/Xlib.h>])
  	CPPFLAGS="$SAVE_CPPFLAGS"],[echo "not found"])
  

@@ -22,5 +22,5 @@ index 81c3ae4..26601bf 100644
  	CPPFLAGS="$SAVE_CPPFLAGS"],[echo "not found"])
 +fi
  
- AC_ARG_WITH(xf86misc, AC_HELP_STRING([--without-xf86misc],[Disable xf86misc support.]),
+ AC_ARG_WITH(xf86misc, AS_HELP_STRING([--without-xf86misc],[Disable xf86misc support.]),
                  [USE_XF86MISC="$withval"], [USE_XF86MISC="yes"])

index 932a4c0bfe6..d6056dceffa 100644
@@ -15,13 +15,13 @@ Signed-off-by: Robert Yang <[email protected]>
  Makefile |    4 +++-
  1 file changed, 3 insertions(+), 1 deletion(-)
 
-diff --git a/Makefile.in b/Makefile.in
-index 2a9b918..aa7c04a 100644
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -75,7 +75,9 @@ at: $(ATOBJECTS)
+Index: at-3.1.20/Makefile.in
+===================================================================
+--- at-3.1.20.orig/Makefile.in
++++ at-3.1.20/Makefile.in
+@@ -76,7 +76,9 @@ at: $(ATOBJECTS)
  atd: $(RUNOBJECTS)
- 	$(CC) $(LDFLAGS) -o atd $(RUNOBJECTS) $(LIBS) $(PAMLIB)
+ 	$(CC) $(LDFLAGS) -o atd $(RUNOBJECTS) $(LIBS) $(PAMLIB) $(SELINUXLIB)
  
 -y.tab.c y.tab.h: parsetime.y
 +y.tab.h: y.tab.c

@@ -30,6 +30,3 @@ index 2a9b918..aa7c04a 100644
  	$(YACC) -d parsetime.y
  
  lex.yy.c: parsetime.l
--- 
-1.7.9.5
-

index 81f8f0a9cd5..9970b4d8f93 100644
@@ -1,8 +1,10 @@
 Upstream-Status: Inappropriate [embedded specific]
 
---- execute_cmd.c.orig	Fri Jun  3 13:34:42 2011
-+++ execute_cmd.c	Fri Jun  3 13:36:41 2011
-@@ -2202,7 +2202,11 @@
+Index: execute_cmd.c
+===================================================================
+--- execute_cmd.c.orig
++++ execute_cmd.c
+@@ -2459,7 +2459,11 @@ execute_pipeline (command, asynchronous,
    /* If the `lastpipe' option is set with shopt, and job control is not
       enabled, execute the last element of non-async pipelines in the
       current shell environment. */

@@ -13,5 +15,5 @@ Upstream-Status: Inappropriate [embedded specific]
 +#endif
 +		asynchronous == 0 && pipe_out == NO_PIPE && prev > 0)
      {
-       lstdin = move_to_high_fd (0, 0, 255);
+       lstdin = move_to_high_fd (0, 1, -1);
        if (lstdin > 0)

index bf66267e81b..dbf7142f18a 100644
@@ -5,11 +5,12 @@ Signed-off-by: Tudor Florea <[email protected]>
 Upstream-Status: Inappropriate
 (default automake behavior incompatible with ptest)
 
-diff -ruN a/configure.ac b/configure.ac
---- a/configure.ac	2014-05-28 18:19:13.513980977 +0200
-+++ b/configure.ac	2014-05-28 18:19:21.129660215 +0200
-@@ -2,7 +2,7 @@
- AC_INIT(ethtool, 3.14, [email protected])
+Index: ethtool-4.11/configure.ac
+===================================================================
+--- ethtool-4.11.orig/configure.ac
++++ ethtool-4.11/configure.ac
+@@ -2,7 +2,7 @@ dnl Process this file with autoconf to p
+ AC_INIT(ethtool, 4.11, [email protected])
  AC_PREREQ(2.52)
  AC_CONFIG_SRCDIR([ethtool.c])
 -AM_INIT_AUTOMAKE([gnu])

index e28a949bf71..b4c14ea231e 100644
@@ -12,11 +12,12 @@ Signed-off-by: Wenzong Fan <[email protected]>
 # Summary: Generate arch.h for ppc32
 #
 
-diff -Nru ghostscript-8.64.orig/base/lib.mak ghostscript-8.64/base/lib.mak
---- ghostscript-8.64.orig/base/lib.mak	2010-02-10 10:30:02.000000000 +0800
-+++ ghostscript-8.64/base/lib.mak	2010-02-10 10:56:21.000000000 +0800
-@@ -67,8 +67,8 @@
- stdpre_h=$(GLSRC)stdpre.h $(stdpn_h)
+Index: ghostscript-9.21/base/lib.mak
+===================================================================
+--- ghostscript-9.21.orig/base/lib.mak
++++ ghostscript-9.21/base/lib.mak
+@@ -73,8 +73,8 @@ arch_h=$(GLGEN)arch.h
+ stdpre_h=$(GLSRC)stdpre.h
  stdint__h=$(GLSRC)stdint_.h $(std_h)
  
 -$(GLGEN)arch.h : $(GENARCH_XE)

deleted file mode 100644
index b7eed1241e7..00000000000
@@ -1,33 +0,0 @@
-From 8abd22010eb4db0fb1b10e430d5f5d83e015ef70 Mon Sep 17 00:00:00 2001
-From: Chris Liddell <[email protected]>
-Date: Mon, 3 Oct 2016 01:46:28 +0100
-Subject: [PATCH] Bug 697169: Be rigorous with SAFER permissions
-
-Once we've opened our input file from the command line, enforce the SAFER
-rules.
-
-Upstream-Status: Backport
-CVE: CVE-2016-7977
-
-Signed-off-by: Catalin Enache <[email protected]>
----
- psi/zfile.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/psi/zfile.c b/psi/zfile.c
-index b6caea2..2c6c958 100644
---- a/psi/zfile.c
-+++ b/psi/zfile.c
-@@ -1081,6 +1081,9 @@ lib_file_open(gs_file_path_ptr  lib_path, const gs_memory_t *mem, i_ctx_t *i_ctx
-     gs_main_instance *minst = get_minst_from_memory(mem);
-     int code;
- 
-+    if (i_ctx_p && starting_arg_file)
-+        i_ctx_p->starting_arg_file = false;
-+
-     /* when starting arg files (@ files) iodev_default is not yet set */
-     if (iodev == 0)
-         iodev = (gx_io_device *)gx_io_device_table[0];
--- 
-2.10.2
-

index bf985c44a3e..50ec7e20c5a 100644
@@ -32,7 +32,6 @@ SRC_URI = "${SRC_URI_BASE} \
            file://ghostscript-9.02-genarch.patch \
            file://objarch.h \
            file://cups-no-gcrypt.patch \
-           file://CVE-2016-7977.patch \
            file://CVE-2017-7207.patch \
            file://CVE-2017-5951.patch \
            file://CVE-2017-7975.patch \

index 5683d3c98d7..db91317ca5b 100644
@@ -9,12 +9,12 @@ This patch fixes following issue with automake 1.12
 Signed-off-by: Nitin A Kamble <[email protected]>
 2012/05/03
 
-Index: libidn-1.24/configure.ac
+Index: libidn-1.33/configure.ac
 ===================================================================
---- libidn-1.24.orig/configure.ac
-+++ libidn-1.24/configure.ac
-@@ -34,6 +34,10 @@ AC_SUBST(LT_CURRENT, 17)
- AC_SUBST(LT_REVISION, 7)
+--- libidn-1.33.orig/configure.ac
++++ libidn-1.33/configure.ac
+@@ -33,6 +33,10 @@ AC_SUBST(LT_CURRENT, 17)
+ AC_SUBST(LT_REVISION, 16)
  AC_SUBST(LT_AGE, 6)
  
 +# automake 1.12 seems to require this, but automake 1.11 doesn't recognize it

index 54bf1d79ab7..df21399deb2 100644
@@ -7,13 +7,13 @@ make: *** [super-intel.o] Error 1
 Signed-off-by: Khem Raj <[email protected]>
 Upstream-Status: Pending
 
-Index: mdadm-3.3/super-intel.c
+Index: mdadm-4.0/super-intel.c
 ===================================================================
---- mdadm-3.3.orig/super-intel.c	2014-05-02 15:08:21.154319651 -0700
-+++ mdadm-3.3/super-intel.c	2014-05-02 15:09:31.470985794 -0700
-@@ -5060,7 +5060,7 @@
- 	spare->cache_size = mpb->cache_size,
- 	spare->pwr_cycle_count = __cpu_to_le32(1),
+--- mdadm-4.0.orig/super-intel.c
++++ mdadm-4.0/super-intel.c
+@@ -5725,7 +5725,7 @@ static int write_super_imsm_spares(struc
+ 	spare->cache_size = mpb->cache_size;
+ 	spare->pwr_cycle_count = __cpu_to_le32(1);
  
 -	snprintf((char *) spare->sig, MAX_SIGNATURE_LENGTH,
 +	(void)snprintf((char *) spare->sig, MAX_SIGNATURE_LENGTH,

index c656d073e37..00e6657e091 100644
@@ -5,13 +5,13 @@ Upstream-Status: Pending
 
 Signed-off-by: Aníbal Limón <[email protected]>
 
-Index: mdadm-3.3.4/monitor.c
+Index: mdadm-4.0/monitor.c
 ===================================================================
---- mdadm-3.3.4.orig/monitor.c
-+++ mdadm-3.3.4/monitor.c
-@@ -257,9 +257,12 @@ static int read_and_act(struct active_ar
- 			mdi->curr_state = read_dev_state(mdi->state_fd);
- 		}
+--- mdadm-4.0.orig/monitor.c
++++ mdadm-4.0/monitor.c
+@@ -445,9 +445,12 @@ static int read_and_act(struct active_ar
+ 		if (FD_ISSET(mdi->bb_fd, fds))
+ 			check_for_cleared_bb(a, mdi);
  	}
 -
  	gettimeofday(&tv, NULL);

index be687457f82..7edf66f9153 100644
@@ -3,18 +3,20 @@ This patch is used to create a new sub package libpam-xtests to do more checks.
 Upstream-Status: Pending
 
 Signed-off-by: Kang Kai <[email protected]>
---- Linux-PAM-1.1.4/xtests/Makefile.am.orig	2011-07-19 17:00:09.619980001 +0800
-+++ Linux-PAM-1.1.4/xtests/Makefile.am	2011-07-19 16:54:00.229979998 +0800
-@@ -7,7 +7,7 @@
- AM_LDFLAGS = -L$(top_builddir)/libpam -lpam \
- 	-L$(top_builddir)/libpam_misc -lpam_misc
+Index: Linux-PAM-1.3.0/xtests/Makefile.am
+===================================================================
+--- Linux-PAM-1.3.0.orig/xtests/Makefile.am
++++ Linux-PAM-1.3.0/xtests/Makefile.am
+@@ -7,7 +7,7 @@ AM_CFLAGS = -DLIBPAM_COMPILE -I$(top_src
+ LDADD = $(top_builddir)/libpam/libpam.la \
+ 	$(top_builddir)/libpam_misc/libpam_misc.la
  
 -CLEANFILES = *~ $(XTESTS)
 +CLEANFILES = *~
  
  EXTRA_DIST = run-xtests.sh tst-pam_dispatch1.pamd tst-pam_dispatch2.pamd \
  	tst-pam_dispatch3.pamd tst-pam_dispatch4.pamd \
-@@ -51,3 +51,18 @@
+@@ -51,3 +51,18 @@ EXTRA_PROGRAMS = $(XTESTS)
  
  xtests: $(XTESTS) run-xtests.sh
  	"$(srcdir)"/run-xtests.sh "$(srcdir)" ${XTESTS} ${NOSRCTESTS}

index f1834f6ce34..9b8d4c29751 100644
@@ -5,12 +5,13 @@ Upstream-Status: Pending
 
 Signed-off-by: Ming Liu <[email protected]>
 ===================================================================
-diff -urpN a/modules/pam_securetty/Makefile.am b/modules/pam_securetty/Makefile.am
---- a/modules/pam_securetty/Makefile.am	2013-07-05 11:08:23.224483237 +0800
-+++ b/modules/pam_securetty/Makefile.am	2013-07-05 11:15:21.304486456 +0800
+Index: Linux-PAM-1.3.0/modules/pam_securetty/Makefile.am
+===================================================================
+--- Linux-PAM-1.3.0.orig/modules/pam_securetty/Makefile.am
++++ Linux-PAM-1.3.0/modules/pam_securetty/Makefile.am
 @@ -24,6 +24,10 @@ endif
  securelib_LTLIBRARIES = pam_securetty.la
- pam_securetty_la_LIBADD = -L$(top_builddir)/libpam -lpam
+ pam_securetty_la_LIBADD = $(top_builddir)/libpam/libpam.la
  
 +pam_securetty_la_SOURCES =	\
 +	pam_securetty.c		\

@@ -19,9 +20,10 @@ diff -urpN a/modules/pam_securetty/Makefile.am b/modules/pam_securetty/Makefile.
  if ENABLE_REGENERATE_MAN
  noinst_DATA = README
  README: pam_securetty.8.xml
-diff -urpN a/modules/pam_securetty/pam_securetty.c b/modules/pam_securetty/pam_securetty.c
---- a/modules/pam_securetty/pam_securetty.c	2013-07-05 11:07:50.064483568 +0800
-+++ b/modules/pam_securetty/pam_securetty.c	2013-07-05 11:12:23.994483344 +0800
+Index: Linux-PAM-1.3.0/modules/pam_securetty/pam_securetty.c
+===================================================================
+--- Linux-PAM-1.3.0.orig/modules/pam_securetty/pam_securetty.c
++++ Linux-PAM-1.3.0/modules/pam_securetty/pam_securetty.c
 @@ -1,7 +1,5 @@
  /* pam_securetty module */
  

@@ -104,9 +106,10 @@ diff -urpN a/modules/pam_securetty/pam_securetty.c b/modules/pam_securetty/pam_s
  
      if (retval && !(ctrl & PAM_NOCONSOLE_ARG)) {
          FILE *cmdlinefile;
-diff -urpN a/modules/pam_securetty/tty_secure.c b/modules/pam_securetty/tty_secure.c
---- a/modules/pam_securetty/tty_secure.c	1970-01-01 08:30:00.000000000 +0830
-+++ b/modules/pam_securetty/tty_secure.c	2013-07-05 11:14:21.534482900 +0800
+Index: Linux-PAM-1.3.0/modules/pam_securetty/tty_secure.c
+===================================================================
+--- /dev/null
++++ Linux-PAM-1.3.0/modules/pam_securetty/tty_secure.c
 @@ -0,0 +1,90 @@
 +/*
 + * A function to determine if a particular line is in /etc/securetty

index 58d8db44264..e6a26d11a5c 100644
@@ -5,12 +5,12 @@ it to be disabled.
 
 RP - 4/11/08
 
-Index: parted-1.9.0/configure.ac
+Index: parted-3.2/configure.ac
 ===================================================================
---- parted-1.9.0.orig/configure.ac	2009-07-23 18:52:08.000000000 +0100
-+++ parted-1.9.0/configure.ac	2010-02-02 14:13:56.013905093 +0000
-@@ -477,7 +477,7 @@
- AM_CONDITIONAL([BUILD_LINUX], [test "$OS" = linux])
+--- parted-3.2.orig/configure.ac
++++ parted-3.2/configure.ac
+@@ -555,7 +555,7 @@ AC_CHECK_HEADER([execinfo.h], [
+ AM_CONDITIONAL([COMPILE_FOR_S390], [test "$host_cpu" = s390 || test "$host_cpu" = s390x])
  
  dnl check for "check", unit testing library/header
 -PKG_CHECK_MODULES([CHECK], [check >= 0.9.3], have_check=yes, have_check=no)

index e9bbe9a956d..93205a0a804 100644
@@ -4,10 +4,10 @@ Upstream-Status: Pending
  libparted/arch/linux.c |   13 +++++++++++++
  1 file changed, 13 insertions(+)
 
-Index: parted-1.9.0/libparted/arch/linux.c
+Index: parted-3.2/libparted/arch/linux.c
 ===================================================================
---- parted-1.9.0.orig/libparted/arch/linux.c	2009-07-23 18:52:08.000000000 +0100
-+++ parted-1.9.0/libparted/arch/linux.c	2010-02-02 14:14:16.523904768 +0000
+--- parted-3.2.orig/libparted/arch/linux.c
++++ parted-3.2/libparted/arch/linux.c
 @@ -17,6 +17,8 @@
  
  #define PROC_DEVICES_BUFSIZ 16384

@@ -16,8 +16,8 @@ Index: parted-1.9.0/libparted/arch/linux.c
 +
  #include <config.h>
  #include <arch/linux.h>
- 
-@@ -1477,12 +1479,14 @@
+ #include <linux/blkpg.h>
+@@ -1696,12 +1698,14 @@ linux_refresh_close (PedDevice* dev)
  
  #if SIZEOF_OFF_T < 8
  

@@ -32,7 +32,7 @@ Index: parted-1.9.0/libparted/arch/linux.c
  
  loff_t
  llseek (unsigned int fd, loff_t offset, unsigned int whence)
-@@ -1490,11 +1494,20 @@
+@@ -1709,11 +1713,20 @@ llseek (unsigned int fd, loff_t offset,
          loff_t result;
          int retval;
  

index e8289e44d93..d473fb63429 100644
@@ -1,9 +1,10 @@
 Upstream-Status: Backport
 
-diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
---- tcp_wrappers_7.6.orig/Makefile	2003-08-21 01:43:39.000000000 +0200
-+++ tcp_wrappers_7.6/Makefile	2003-08-21 01:43:35.000000000 +0200
-@@ -45,7 +45,7 @@
+Index: tcp_wrappers_7.6/Makefile
+===================================================================
+--- tcp_wrappers_7.6.orig/Makefile
++++ tcp_wrappers_7.6/Makefile
+@@ -45,7 +45,7 @@ what:
  #
  # SysV.4 Solaris 2.x OSF AIX
  #REAL_DAEMON_DIR=/usr/sbin

@@ -12,7 +13,7 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
  # BSD 4.4
  #REAL_DAEMON_DIR=/usr/libexec
  #
-@@ -512,6 +519,7 @@
+@@ -513,6 +513,7 @@ VSYSLOG	= -Dvsyslog=myvsyslog
  # (examples: allow, deny, banners, twist and spawn).
  # 
  #STYLE	= -DPROCESS_OPTIONS	# Enable language extensions.

@@ -20,7 +21,7 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
  
  ################################################################
  # Optional: Changing the default disposition of logfile records
-@@ -535,6 +543,7 @@
+@@ -536,6 +537,7 @@ VSYSLOG	= -Dvsyslog=myvsyslog
  # The LOG_XXX names below are taken from the /usr/include/syslog.h file.
  
  FACILITY= LOG_MAIL	# LOG_MAIL is what most sendmail daemons use

@@ -28,7 +29,7 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
  
  # The syslog priority at which successful connections are logged.
  
-@@ -631,6 +640,7 @@
+@@ -632,6 +634,7 @@ TABLES	= -DHOSTS_DENY=\"/etc/hosts.deny\
  # lookups altogether, see the next section.
  
  PARANOID= -DPARANOID

@@ -36,7 +37,7 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
  
  ########################################
  # Optional: turning off hostname lookups
-@@ -644,6 +654,7 @@
+@@ -645,6 +648,7 @@ PARANOID= -DPARANOID
  # mode (see previous section) and comment out the following definition.
  
  HOSTNAME= -DALWAYS_HOSTNAME

@@ -44,7 +45,7 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
  
  #############################################
  # Optional: Turning on host ADDRESS checking
-@@ -670,6 +681,7 @@
+@@ -671,6 +675,7 @@ HOSTNAME= -DALWAYS_HOSTNAME
  # Solaris 2.x, and Linux. See your system documentation for details.
  #
  # KILL_OPT= -DKILL_IP_OPTIONS

@@ -52,7 +53,7 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
  
  ## End configuration options
  ############################
-@@ -677,9 +689,10 @@
+@@ -678,9 +683,10 @@ HOSTNAME= -DALWAYS_HOSTNAME
  # Protection against weird shells or weird make programs.
  
  SHELL	= /bin/sh

@@ -65,7 +66,7 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
  	$(BUGS) $(SYSTYPE) $(AUTH) $(UMASK) \
  	-DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" $(STYLE) $(KILL_OPT) \
  	-DSEVERITY=$(SEVERITY) -DRFC931_TIMEOUT=$(RFC931_TIMEOUT) \
-@@ -712,10 +725,11 @@
+@@ -713,11 +719,12 @@ all other: config-check tcpd tcpdmatch t
  
  config-check:
  	@set +e; test -n "$(REAL_DAEMON_DIR)" || { make; exit 1; }

@@ -81,3 +82,4 @@ diff -ruN tcp_wrappers_7.6.orig/Makefile tcp_wrappers_7.6/Makefile
 +	@if [ ! -d shared ]; then mkdir shared; fi
  
  $(LIB):	$(LIB_OBJ)
+ 	rm -f $(LIB)

deleted file mode 100644
index f1f85a6fa0e..00000000000
@@ -1,46 +0,0 @@
-[PATCH] fix build with musl
-
-Define additional TCOPTS if not there
-u_initX types are in sys/types.h be explicit about it
-
-Upstream-Status: Pending
-
-Signed-off-by: Khem Raj <[email protected]>
-Signed-off-by: Maxin B. John <[email protected]>
----
-diff -Naur iptables-1.6.0-origin/extensions/libxt_TCPOPTSTRIP.c iptables-1.6.0/extensions/libxt_TCPOPTSTRIP.c
---- iptables-1.6.0-origin/extensions/libxt_TCPOPTSTRIP.c	2015-12-09 14:55:06.000000000 +0200
-+++ iptables-1.6.0/extensions/libxt_TCPOPTSTRIP.c	2015-12-29 14:44:32.585327077 +0200
-@@ -12,6 +12,21 @@
- #ifndef TCPOPT_MD5SIG
- #	define TCPOPT_MD5SIG 19
- #endif
-+#ifndef TCPOPT_MAXSEG
-+#define TCPOPT_MAXSEG 2
-+#endif
-+#ifndef TCPOPT_WINDOW
-+#define TCPOPT_WINDOW 3
-+#endif
-+#ifndef TCPOPT_SACK_PERMITTED
-+#define TCPOPT_SACK_PERMITTED 4
-+#endif
-+#ifndef TCPOPT_SACK
-+#define TCPOPT_SACK 5
-+#endif
-+#ifndef TCPOPT_TIMESTAMP
-+#define TCPOPT_TIMESTAMP 8
-+#endif
- 
- enum {
- 	O_STRIP_OPTION = 0,
-diff -Naur iptables-1.6.0-origin/include/linux/netfilter_ipv4/ip_tables.h iptables-1.6.0/include/linux/netfilter_ipv4/ip_tables.h
---- iptables-1.6.0-origin/include/linux/netfilter_ipv4/ip_tables.h	2015-12-09 14:55:06.000000000 +0200
-+++ iptables-1.6.0/include/linux/netfilter_ipv4/ip_tables.h	2015-12-29 14:40:21.250469195 +0200
-@@ -15,6 +15,7 @@
- #ifndef _IPTABLES_H
- #define _IPTABLES_H
- 
-+#include <sys/types.h>
- #include <linux/types.h>
- 
- #include <linux/netfilter_ipv4.h>

49 lines not on this page · raw message

index b37c55a64ea..d6e36fbee9a 100644
@@ -19,10 +19,8 @@ RRECOMMENDS_${PN} = "kernel-module-x-tables \
 FILES_${PN} =+ "${libdir}/xtables/ ${datadir}/xtables"
 
 SRC_URI = "http://netfilter.org/projects/iptables/files/iptables-${PV}.tar.bz2 \
-           file://types.h-add-defines-that-are-required-for-if_packet.patch \
            file://0001-configure-Add-option-to-enable-disable-libnfnetlink.patch \
            file://0002-configure.ac-only-check-conntrack-when-libnfnetlink-enabled.patch \
-           file://0001-fix-build-with-musl.patch \
 "
 
 SRC_URI[md5sum] = "ab38a33806b6182c6f53d6afb4619add"

index 0532671747e..d16b5c771b6 100644
@@ -17,10 +17,10 @@ Signed-off-by: Aníbal Limón <[email protected]>
  configure.ac | 7 -------
  2 files changed, 3 insertions(+), 13 deletions(-)
 
-diff --git a/Makefile b/Makefile
-index 7680f08..69527a5 100644
---- a/Makefile
-+++ b/Makefile
+Index: apt-1.2.24/Makefile
+===================================================================
+--- apt-1.2.24.orig/Makefile
++++ apt-1.2.24/Makefile
 @@ -9,8 +9,8 @@ endif
  .PHONY: default
  default: startup all

@@ -32,9 +32,9 @@ index 7680f08..69527a5 100644
  	$(MAKE) -C vendor $@
  	$(MAKE) -C apt-pkg $@
  	$(MAKE) -C apt-inst $@
-@@ -21,8 +21,6 @@ all headers library clean veryclean binary program doc manpages docbook test upd
+@@ -21,8 +21,6 @@ all headers library clean veryclean bina
  	$(MAKE) -C dselect $@
- 	$(MAKE) -C doc $@
+ #	$(MAKE) -C doc $@
  	$(MAKE) -C po $@
 -	# FIXME: -C test has issue swith parallel builds, investigate!
 -	-$(MAKE) -C test $@

@@ -52,10 +52,10 @@ index 7680f08..69527a5 100644
  
  dirs: startup
  
-diff --git a/configure.ac b/configure.ac
-index 1f05da5..e47f459 100644
---- a/configure.ac
-+++ b/configure.ac
+Index: apt-1.2.24/configure.ac
+===================================================================
+--- apt-1.2.24.orig/configure.ac
++++ apt-1.2.24/configure.ac
 @@ -90,13 +90,6 @@ AC_CHECK_LIB(curl, curl_easy_init,
       AC_MSG_ERROR([failed: I need CURL due https support]),
  )

@@ -70,6 +70,3 @@ index 1f05da5..e47f459 100644
  AC_SUBST(BDBLIB)
  
  HAVE_ZLIB=no
--- 
-2.1.4
-

index 801ae6dddb4..899c6ef2fcf 100644
@@ -1,12 +1,14 @@
 Upstream-Status: Pending
 
---- a/apt-pkg/contrib/weakptr.h
-+++ b/apt-pkg/contrib/weakptr.h
+Index: apt-1.2.24/apt-pkg/contrib/weakptr.h
+===================================================================
+--- apt-1.2.24.orig/apt-pkg/contrib/weakptr.h
++++ apt-1.2.24/apt-pkg/contrib/weakptr.h
 @@ -21,6 +21,7 @@
  #ifndef WEAK_POINTER_H
  #define WEAK_POINTER_H
  
 +#include <cstdlib>
  #include <set>
- /**
-  * Class for objects providing support for weak pointers.
+ #include <stddef.h>
+ 

index 46e3161b673..0c686d6e276 100644
@@ -8,16 +8,16 @@ RP 2012/3/19
 
 Upstream-Status: Pending
 
-Index: apt-0.9.9.4/buildlib/library.mak
+Index: apt-1.2.24/buildlib/library.mak
 ===================================================================
---- apt-0.9.9.4.orig/buildlib/library.mak	2013-07-31 15:45:07.320440575 +0300
-+++ apt-0.9.9.4/buildlib/library.mak	2013-07-31 15:46:49.440440561 +0300
-@@ -61,7 +61,7 @@
+--- apt-1.2.24.orig/buildlib/library.mak
++++ apt-1.2.24/buildlib/library.mak
+@@ -65,7 +65,7 @@ $(LIB)/lib$(LIBRARY).so.$(MAJOR).$(MINOR
  
  # Compilation rules
  vpath %.cc $(SUBDIRS)
 -$(OBJ)/%.opic: %.cc $(LIBRARYDEPENDS)
 +$(OBJ)/%.opic: %.cc $(LIBRARYDEPENDS) $($(LOCAL)-HEADERS)
  	echo Compiling $< to $@
- 	$(CXX) -c $(INLINEDEPFLAG) $(CPPFLAGS) $(CXXFLAGS) $(PICFLAGS) -o $@ $<
+ 	$(CXX) -c $(INLINEDEPFLAG) $(CPPFLAGS) $(CXXSTD) $(CXXFLAGS) $(PICFLAGS) -o $@ '$(abspath $<)'
  	$(DoDep)

index a0996d4d440..98b6c96caac 100644
@@ -1,8 +1,10 @@
 Upstream-Status: Pending
 
---- a/apt-pkg/deb/dpkgpm.cc
-+++ b/apt-pkg/deb/dpkgpm.cc
-@@ -42,6 +42,12 @@
+Index: apt-1.2.24/apt-pkg/deb/dpkgpm.cc
+===================================================================
+--- apt-1.2.24.orig/apt-pkg/deb/dpkgpm.cc
++++ apt-1.2.24/apt-pkg/deb/dpkgpm.cc
+@@ -54,6 +54,12 @@
  #include <apti18n.h>
  									/*}}}*/
  

@@ -14,8 +16,8 @@ Upstream-Status: Pending
 +
  using namespace std;
  
- namespace
-@@ -1279,7 +1285,7 @@ void pkgDPkgPM::WriteApportReport(const
+ APT_PURE static string
+@@ -1703,7 +1709,7 @@ void pkgDPkgPM::WriteApportReport(const
     }
  
     // check if its not a follow up error 

index 449e42df4a9..78cf53884a4 100644
@@ -3,16 +3,16 @@ Disable documentation
 Upstream-Status: Inappropriate [configuration]
 Signed-off-by: Constantin Musca <[email protected]>
 
-Index: apt-0.9.7.7/Makefile
+Index: apt-1.2.24/Makefile
 ===================================================================
---- apt-0.9.7.7.orig/Makefile
-+++ apt-0.9.7.7/Makefile
-@@ -17,7 +17,7 @@ all headers library clean veryclean bina
+--- apt-1.2.24.orig/Makefile
++++ apt-1.2.24/Makefile
+@@ -19,7 +19,7 @@ all headers library clean veryclean bina
  	$(MAKE) -C cmdline $@
  	$(MAKE) -C ftparchive $@
  	$(MAKE) -C dselect $@
 -	$(MAKE) -C doc $@
 +#	$(MAKE) -C doc $@
  	$(MAKE) -C po $@
- 	$(MAKE) -C test $@
- 
+ 	# FIXME: -C test has issue swith parallel builds, investigate!
+ 	-$(MAKE) -C test $@

index 64eb253a6ea..96b5a3d6b2a 100644
@@ -22,10 +22,10 @@ Signed-off-by: Serhii Popovych <[email protected]>
  t/wrap/automake.in | 3 ++-
  4 files changed, 8 insertions(+), 4 deletions(-)
 
-diff --git a/bin/aclocal.in b/bin/aclocal.in
-index 349f24a..50cb8d3 100644
---- a/bin/aclocal.in
-+++ b/bin/aclocal.in
+Index: automake-1.15.1/bin/aclocal.in
+===================================================================
+--- automake-1.15.1.orig/bin/aclocal.in
++++ automake-1.15.1/bin/aclocal.in
 @@ -1,4 +1,4 @@
 -#!@PERL@ -w
 +#!@PERL@

@@ -40,17 +40,17 @@ index 349f24a..50cb8d3 100644
  
  use Automake::Config;
  use Automake::General;
-diff --git a/bin/automake.in b/bin/automake.in
-index eedc8bc..e0a01cf 100644
---- a/bin/automake.in
-+++ b/bin/automake.in
+Index: automake-1.15.1/bin/automake.in
+===================================================================
+--- automake-1.15.1.orig/bin/automake.in
++++ automake-1.15.1/bin/automake.in
 @@ -1,4 +1,4 @@
 -#!@PERL@ -w
 +#!@PERL@
  # -*- perl -*-
  # @configure_input@
  
-@@ -28,6 +28,7 @@ eval 'case $# in 0) exec @PERL@ -S "$0";; *) exec @PERL@ -S "$0" "$@";; esac'
+@@ -28,6 +28,7 @@ eval 'case $# in 0) exec @PERL@ -S "$0";
  package Automake;
  
  use strict;

@@ -58,16 +58,16 @@ index eedc8bc..e0a01cf 100644
  
  BEGIN
  {
-diff --git a/t/wrap/aclocal.in b/t/wrap/aclocal.in
-index e64b546..9996899 100644
---- a/t/wrap/aclocal.in
-+++ b/t/wrap/aclocal.in
+Index: automake-1.15.1/t/wrap/aclocal.in
+===================================================================
+--- automake-1.15.1.orig/t/wrap/aclocal.in
++++ automake-1.15.1/t/wrap/aclocal.in
 @@ -1,4 +1,4 @@
 -#!@PERL@ -w
 +#!@PERL@
  # @configure_input@
  
- # Copyright (C) 2012-2014 Free Software Foundation, Inc.
+ # Copyright (C) 2012-2017 Free Software Foundation, Inc.
 @@ -19,6 +19,7 @@
  BEGIN
  {

@@ -76,16 +76,16 @@ index e64b546..9996899 100644
    @Aclocal::perl_libdirs = ('@abs_top_srcdir@/lib');
    unshift @Aclocal::perl_libdirs, '@abs_top_builddir@/lib'
      if '@srcdir@' ne '.';
-diff --git a/t/wrap/automake.in b/t/wrap/automake.in
-index 8b943b1..be61226 100644
---- a/t/wrap/automake.in
-+++ b/t/wrap/automake.in
+Index: automake-1.15.1/t/wrap/automake.in
+===================================================================
+--- automake-1.15.1.orig/t/wrap/automake.in
++++ automake-1.15.1/t/wrap/automake.in
 @@ -1,4 +1,4 @@
 -#!@PERL@ -w
 +#!@PERL@
  # @configure_input@
  
- # Copyright (C) 2012-2014 Free Software Foundation, Inc.
+ # Copyright (C) 2012-2017 Free Software Foundation, Inc.
 @@ -19,6 +19,7 @@
  BEGIN
  {

@@ -94,6 +94,3 @@ index 8b943b1..be61226 100644
    @Automake::perl_libdirs = ('@abs_top_srcdir@/lib');
    unshift @Automake::perl_libdirs, '@abs_top_builddir@/lib'
      if '@srcdir@' ne '.';
--- 
-2.3.0
-

index 1dd5337849f..c32cd1fb11e 100644
@@ -4,21 +4,23 @@ be run separately.
 Signed-off-by: Björn Stenberg <[email protected]>
 Upstream-Status: Pending
 
---- a/lib/am/check.am	2012-11-14 13:46:16.335475995 +0100
-+++ b/lib/am/check.am	2012-08-13 18:40:12.000000000 +0200
-@@ -44,7 +44,7 @@
- am__tty_colors = $(am__tty_colors_dummy)
- endif !%?COLOR%
-
+Index: automake-1.15.1/lib/am/check.am
+===================================================================
+--- automake-1.15.1.orig/lib/am/check.am
++++ automake-1.15.1/lib/am/check.am
+@@ -41,7 +41,7 @@ am__tty_colors = { \
+   fi; \
+ }
+ 
 -.PHONY: check-TESTS
 +.PHONY: check-TESTS buildtest-TESTS runtest-TESTS
-
- if %?PARALLEL_TESTS%
-
-@@ -465,7 +465,14 @@
-
- else !%?PARALLEL_TESTS%
-
+ 
+ if !%?SERIAL_TESTS%
+ 
+@@ -466,7 +466,14 @@ else %?SERIAL_TESTS%
+ 
+ ## Obsolescent serial testsuite driver.
+ 
 -check-TESTS: $(TESTS)
 +AM_RECURSIVE_TARGETS += buildtest runtest
 +

@@ -28,6 +30,6 @@ Upstream-Status: Pending
 +	$(MAKE) $(AM_MAKEFLAGS) runtest-TESTS
 +
 +runtest-TESTS:
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
-	srcdir=$(srcdir); export srcdir; \
+ 	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ 	srcdir=$(srcdir); export srcdir; \
  ## Make sure Solaris VPATH-expands all members of this list, even

index eb52172e10b..f1049e433e2 100644
@@ -10,9 +10,11 @@ Take a patch from Debian to solve this.
 Upstream-Status: Submitted (https://bugs.launchpad.net/intltool/+bug/1465010)
 Signed-off-by: Ross Burton <[email protected]>
 
---- intltool-0.51.0-ORIG/intltool-update.in	2015-05-27 00:20:43.038379963 +0200
-+++ intltool-0.51.0/intltool-update.in	2015-05-27 00:23:53.309078052 +0200
-@@ -1062,7 +1062,7 @@
+Index: intltool-0.51.0/intltool-update.in
+===================================================================
+--- intltool-0.51.0.orig/intltool-update.in
++++ intltool-0.51.0/intltool-update.in
+@@ -1062,7 +1062,7 @@ sub SubstituteVariable
  	}
      }
  

@@ -21,7 +23,7 @@ Signed-off-by: Ross Burton <[email protected]>
      {
  	my $rest = $3;
  	my $untouched = $1;
-@@ -1190,10 +1190,10 @@
+@@ -1190,10 +1190,10 @@ sub FindPackageName
  	$name    =~ s/\(+$//g;
  	$version =~ s/\(+$//g;
  

@@ -36,7 +38,7 @@ Signed-off-by: Ross Burton <[email protected]>
      }
  
      if ($conf_source =~ /^AC_INIT\(([^,\)]+),([^,\)]+)[,]?([^,\)]+)?/m)
-@@ -1219,11 +1219,11 @@
+@@ -1219,11 +1219,11 @@ sub FindPackageName
  	$version =~ s/\(+$//g;
          $bugurl  =~ s/\(+$//g if (defined $bugurl);
  

@@ -52,4 +54,4 @@ Signed-off-by: Ross Burton <[email protected]>
 +        $varhash{"PACKAGE_BUGREPORT"} = $bugurl if (defined $bugurl and not $bugurl =~ /\$\{?\w+\}?/);
      }
  
-     # \s makes this not work, why?
\ No newline at end of file
+     # \s makes this not work, why?

index 0e3776af048..5d874d9810b 100644
@@ -1,8 +1,10 @@
 Upstream-Status: Pending
 
---- /tmp/mkfs.jffs2.c	2009-01-11 15:28:41.000000000 +0100
-+++ git/jffsX-utils/mkfs.jffs2.c	2009-01-11 15:59:29.000000000 +0100
-@@ -100,6 +100,11 @@
+Index: git/jffsX-utils/mkfs.jffs2.c
+===================================================================
+--- git.orig/jffsX-utils/mkfs.jffs2.c
++++ git/jffsX-utils/mkfs.jffs2.c
+@@ -100,6 +100,11 @@ struct filesystem_entry {
  	struct rb_node hardlink_rb;
  };
  

@@ -14,7 +16,7 @@ Upstream-Status: Pending
  struct rb_root hardlinks;
  static int out_fd = -1;
  static int in_fd = -1;
-@@ -408,7 +413,7 @@
+@@ -309,7 +314,7 @@ static struct filesystem_entry *recursiv
  	char *hpath, *tpath;
  	struct dirent *dp, **namelist;
  	struct filesystem_entry *entry;

@@ -22,8 +24,8 @@ Upstream-Status: Pending
 +	struct ignorepath_entry* element = ignorepath;
  
  	if (lstat(hostpath, &sb)) {
- 		perror_msg_and_die("%s", hostpath);
-@@ -417,6 +422,15 @@
+ 		sys_errmsg_die("%s", hostpath);
+@@ -318,6 +323,15 @@ static struct filesystem_entry *recursiv
  	entry = add_host_filesystem_entry(targetpath, hostpath,
  			sb.st_uid, sb.st_gid, sb.st_mode, 0, parent);
  

@@ -38,8 +40,8 @@ Upstream-Status: Pending
 +
  	n = scandir(hostpath, &namelist, 0, alphasort);
  	if (n < 0) {
- 		perror_msg_and_die("opening directory %s", hostpath);
-@@ -1453,6 +1467,7 @@
+ 		sys_errmsg_die("opening directory %s", hostpath);
+@@ -1359,6 +1373,7 @@ static struct option long_options[] = {
  	{"root", 1, NULL, 'r'},
  	{"pagesize", 1, NULL, 's'},
  	{"eraseblock", 1, NULL, 'e'},

@@ -47,15 +49,15 @@ Upstream-Status: Pending
  	{"output", 1, NULL, 'o'},
  	{"help", 0, NULL, 'h'},
  	{"verbose", 0, NULL, 'v'},
-@@ -1500,6 +1515,7 @@
- "  -L, --list-compressors  Show the list of the avaiable compressors\n"
+@@ -1409,6 +1424,7 @@ static const char helptext[] =
+ "  -L, --list-compressors  Show the list of the available compressors\n"
  "  -t, --test-compression  Call decompress and compare with the original (for test)\n"
  "  -n, --no-cleanmarkers   Don't add a cleanmarker to every eraseblock\n"
 +"  -I, --ignore=PATH       Ignore sub directory and file tree below PATH when recursing over the file system\n"
  "  -o, --output=FILE       Output to FILE (default: stdout)\n"
  "  -l, --little-endian     Create a little-endian filesystem\n"
  "  -b, --big-endian        Create a big-endian filesystem\n"
-@@ -1666,6 +1682,7 @@
+@@ -1566,6 +1582,7 @@ int main(int argc, char **argv)
  	char *compr_name = NULL;
  	int compr_prior  = -1;
  	int warn_page_size = 0;

@@ -63,7 +65,7 @@ Upstream-Status: Pending
  
  	page_size = sysconf(_SC_PAGESIZE);
  	if (page_size < 0) /* System doesn't know so ... */
-@@ -1676,7 +1693,7 @@
+@@ -1576,7 +1593,7 @@ int main(int argc, char **argv)
  	jffs2_compressors_init();
  
  	while ((opt = getopt_long(argc, argv,

@@ -72,7 +74,7 @@ Upstream-Status: Pending
  	{
  		switch (opt) {
  			case 'D':
-@@ -1700,6 +1717,28 @@
+@@ -1600,6 +1617,28 @@ int main(int argc, char **argv)
  				warn_page_size = 0; /* set by user, so don't need to warn */
  				break;
  

@@ -100,4 +102,4 @@ Upstream-Status: Pending
 +
  			case 'o':
  				if (out_fd != -1) {
- 					error_msg_and_die("output filename specified more than once");
+ 					errmsg_die("output filename specified more than once");

index c0714b51757..6ba96aeb568 100644
@@ -20,15 +20,12 @@ Signed-off-by: Robert Yang <[email protected]>
  com32/Makefile |    1 +
  1 file changed, 1 insertion(+)
 
-diff --git a/com32/Makefile b/com32/Makefile
-index 9a1721b..f172db2 100644
---- a/com32/Makefile
-+++ b/com32/Makefile
-@@ -21,3 +21,4 @@ rosh: lib libutil
- samples: libutil elflink/ldlinux
- sysdump: libupload gpllib
+Index: syslinux-6.03/com32/Makefile
+===================================================================
+--- syslinux-6.03.orig/com32/Makefile
++++ syslinux-6.03/com32/Makefile
+@@ -22,3 +22,4 @@ samples: libutil elflink/ldlinux
+ sysdump: lib libutil libupload gpllib
+ lua/src: cmenu modules
  gpllib: lib
 +libupload: lib
--- 
-1.7.9.5
-

index db4dbc27a97..7dd69d8f4d8 100644
@@ -4,10 +4,11 @@ Rebased it to fit ppp-2.4.5. Dongxiao Xu <[email protected]>
 
 Upstream-Status: Inappropriate [debian/suse patches]
 
-diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
---- ppp-2.4.5-orig/pppd/ipcp.c	2010-06-30 15:51:12.050166398 +0800
-+++ ppp-2.4.5/pppd/ipcp.c	2010-06-30 16:40:00.478716855 +0800
-@@ -198,6 +198,16 @@
+Index: ppp-2.4.7/pppd/ipcp.c
+===================================================================
+--- ppp-2.4.7.orig/pppd/ipcp.c
++++ ppp-2.4.7/pppd/ipcp.c
+@@ -198,6 +198,16 @@ static option_t ipcp_option_list[] = {
        "disable defaultroute option", OPT_ALIAS | OPT_A2CLR,
        &ipcp_wantoptions[0].default_route },
  

@@ -24,7 +25,7 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
      { "proxyarp", o_bool, &ipcp_wantoptions[0].proxy_arp,
        "Add proxy ARP entry", OPT_ENABLE|1, &ipcp_allowoptions[0].proxy_arp },
      { "noproxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
-@@ -271,7 +281,7 @@
+@@ -271,7 +281,7 @@ struct protent ipcp_protent = {
      ip_active_pkt
  };
  

@@ -33,7 +34,7 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
  static void ipcp_script __P((char *, int));	/* Run an up/down script */
  static void ipcp_script_done __P((void *));
  
-@@ -1742,7 +1752,12 @@
+@@ -1761,7 +1771,12 @@ ip_demand_conf(u)
      if (!sifnpmode(u, PPP_IP, NPMODE_QUEUE))
  	return 0;
      if (wo->default_route)

@@ -46,7 +47,7 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
  	    default_route_set[u] = 1;
      if (wo->proxy_arp)
  	if (sifproxyarp(u, wo->hisaddr))
-@@ -1830,7 +1845,8 @@
+@@ -1849,7 +1864,8 @@ ipcp_up(f)
       */
      if (demand) {
  	if (go->ouraddr != wo->ouraddr || ho->hisaddr != wo->hisaddr) {

@@ -56,7 +57,7 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
  	    if (go->ouraddr != wo->ouraddr) {
  		warn("Local IP address changed to %I", go->ouraddr);
  		script_setenv("OLDIPLOCAL", ip_ntoa(wo->ouraddr), 0);
-@@ -1855,7 +1871,12 @@
+@@ -1874,7 +1890,12 @@ ipcp_up(f)
  
  	    /* assign a default route through the interface if required */
  	    if (ipcp_wantoptions[f->unit].default_route) 

@@ -69,7 +70,7 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
  		    default_route_set[f->unit] = 1;
  
  	    /* Make a proxy ARP entry if requested. */
-@@ -1905,7 +1926,12 @@
+@@ -1924,7 +1945,12 @@ ipcp_up(f)
  
  	/* assign a default route through the interface if required */
  	if (ipcp_wantoptions[f->unit].default_route) 

@@ -82,7 +83,7 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
  		default_route_set[f->unit] = 1;
  
  	/* Make a proxy ARP entry if requested. */
-@@ -1983,7 +2009,7 @@
+@@ -2002,7 +2028,7 @@ ipcp_down(f)
  	sifnpmode(f->unit, PPP_IP, NPMODE_DROP);
  	sifdown(f->unit);
  	ipcp_clear_addrs(f->unit, ipcp_gotoptions[f->unit].ouraddr,

@@ -91,7 +92,7 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
      }
  
      /* Execute the ip-down script */
-@@ -1999,12 +2025,21 @@
+@@ -2018,12 +2044,21 @@ ipcp_down(f)
   * proxy arp entries, etc.
   */
  static void

@@ -115,10 +116,11 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.c ppp-2.4.5/pppd/ipcp.c
  	cifproxyarp(unit, hisaddr);
  	proxy_arp_set[unit] = 0;
      }
-diff -urN ppp-2.4.5-orig/pppd/ipcp.h ppp-2.4.5/pppd/ipcp.h
---- ppp-2.4.5-orig/pppd/ipcp.h	2010-06-30 15:51:12.043682063 +0800
-+++ ppp-2.4.5/pppd/ipcp.h	2010-06-30 16:40:49.586203129 +0800
-@@ -70,6 +70,7 @@
+Index: ppp-2.4.7/pppd/ipcp.h
+===================================================================
+--- ppp-2.4.7.orig/pppd/ipcp.h
++++ ppp-2.4.7/pppd/ipcp.h
+@@ -70,6 +70,7 @@ typedef struct ipcp_options {
      bool old_addrs;		/* Use old (IP-Addresses) option? */
      bool req_addr;		/* Ask peer to send IP address? */
      bool default_route;		/* Assign default route through interface? */

@@ -126,10 +128,11 @@ diff -urN ppp-2.4.5-orig/pppd/ipcp.h ppp-2.4.5/pppd/ipcp.h
      bool proxy_arp;		/* Make proxy ARP entry for peer? */
      bool neg_vj;		/* Van Jacobson Compression? */
      bool old_vj;		/* use old (short) form of VJ option? */
-diff -urN ppp-2.4.5-orig/pppd/pppd.8 ppp-2.4.5/pppd/pppd.8
---- ppp-2.4.5-orig/pppd/pppd.8	2010-06-30 15:51:12.043682063 +0800
-+++ ppp-2.4.5/pppd/pppd.8	2010-06-30 16:42:47.102413859 +0800
-@@ -121,6 +121,13 @@
+Index: ppp-2.4.7/pppd/pppd.8
+===================================================================
+--- ppp-2.4.7.orig/pppd/pppd.8
++++ ppp-2.4.7/pppd/pppd.8
+@@ -121,6 +121,13 @@ the gateway, when IPCP negotiation is su
  This entry is removed when the PPP connection is broken.  This option
  is privileged if the \fInodefaultroute\fR option has been specified.
  .TP

@@ -143,7 +146,7 @@ diff -urN ppp-2.4.5-orig/pppd/pppd.8 ppp-2.4.5/pppd/pppd.8
  .B disconnect \fIscript
  Execute the command specified by \fIscript\fR, by passing it to a
  shell, after
-@@ -717,7 +724,12 @@
+@@ -734,7 +741,12 @@ disable both forms of hardware flow cont
  .TP
  .B nodefaultroute
  Disable the \fIdefaultroute\fR option.  The system administrator who

@@ -157,10 +160,11 @@ diff -urN ppp-2.4.5-orig/pppd/pppd.8 ppp-2.4.5/pppd/pppd.8
  can do so by placing this option in the /etc/ppp/options file.
  .TP
  .B nodeflate
-diff -urN ppp-2.4.5-orig/pppd/pppd.h ppp-2.4.5/pppd/pppd.h
---- ppp-2.4.5-orig/pppd/pppd.h	2010-06-30 15:51:12.050166398 +0800
-+++ ppp-2.4.5/pppd/pppd.h	2010-06-30 16:43:36.514148327 +0800
-@@ -643,7 +643,11 @@
+Index: ppp-2.4.7/pppd/pppd.h
+===================================================================
+--- ppp-2.4.7.orig/pppd/pppd.h
++++ ppp-2.4.7/pppd/pppd.h
+@@ -665,7 +665,11 @@ int  sif6addr __P((int, eui64_t, eui64_t
  int  cif6addr __P((int, eui64_t, eui64_t));
  				/* Remove an IPv6 address from i/f */
  #endif

@@ -172,19 +176,20 @@ diff -urN ppp-2.4.5-orig/pppd/pppd.h ppp-2.4.5/pppd/pppd.h
  				/* Create default route through i/f */
  int  cifdefaultroute __P((int, u_int32_t, u_int32_t));
  				/* Delete default route through i/f */
-diff -urN ppp-2.4.5-orig/pppd/sys-linux.c ppp-2.4.5/pppd/sys-linux.c
---- ppp-2.4.5-orig/pppd/sys-linux.c	2010-06-30 15:51:12.050166398 +0800
-+++ ppp-2.4.5/pppd/sys-linux.c	2010-06-30 16:54:00.362716231 +0800
-@@ -206,6 +206,8 @@
- 
+Index: ppp-2.4.7/pppd/sys-linux.c
+===================================================================
+--- ppp-2.4.7.orig/pppd/sys-linux.c
++++ ppp-2.4.7/pppd/sys-linux.c
+@@ -207,6 +207,8 @@ static unsigned char inbuf[512]; /* buff
  static int	if_is_up;	/* Interface has been marked up */
+ static int	if6_is_up;	/* Interface has been marked up for IPv6, to help differentiate */
  static int	have_default_route;	/* Gateway for default route added */
 +static struct rtentry old_def_rt;       /* Old default route */
 +static int       default_rt_repl_rest;  /* replace and restore old default rt */
  static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
  static char proxy_arp_dev[16];		/* Device for proxy arp entry */
  static u_int32_t our_old_addr;		/* for detecting address changes */
-@@ -1537,6 +1539,9 @@
+@@ -1545,6 +1547,9 @@ static int read_route_table(struct rtent
  	p = NULL;
      }
  

@@ -194,7 +199,7 @@ diff -urN ppp-2.4.5-orig/pppd/sys-linux.c ppp-2.4.5/pppd/sys-linux.c
      SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
      SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
      SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-@@ -1606,20 +1611,51 @@
+@@ -1614,20 +1619,51 @@ int have_route_to(u_int32_t addr)
  /********************************************************************
   *
   * sifdefaultroute - assign a default route through the address given.

@@ -260,7 +265,7 @@ diff -urN ppp-2.4.5-orig/pppd/sys-linux.c ppp-2.4.5/pppd/sys-linux.c
      }
  
      memset (&rt, 0, sizeof (rt));
-@@ -1638,6 +1674,12 @@
+@@ -1646,6 +1682,12 @@ int sifdefaultroute (int unit, u_int32_t
  	    error("default route ioctl(SIOCADDRT): %m");
  	return 0;
      }

@@ -273,7 +278,7 @@ diff -urN ppp-2.4.5-orig/pppd/sys-linux.c ppp-2.4.5/pppd/sys-linux.c
  
      have_default_route = 1;
      return 1;
-@@ -1673,6 +1715,16 @@
+@@ -1681,6 +1723,16 @@ int cifdefaultroute (int unit, u_int32_t
  	    return 0;
  	}
      }

index d59717ebd3f..8a69396cc71 100644
@@ -6,10 +6,11 @@ Signed-off-by: Andreas Oberritter <[email protected]>
 
 Upstream-Status: Inappropriate [configuration]
 
-diff -urN ppp-2.4.5-orig/pppd/Makefile.linux ppp-2.4.5/pppd/Makefile.linux
---- ppp-2.4.5-orig/pppd/Makefile.linux	2010-06-30 15:51:12.043682063 +0800
-+++ ppp-2.4.5/pppd/Makefile.linux	2010-06-30 17:08:21.806363042 +0800
-@@ -117,10 +117,10 @@
+Index: ppp-2.4.7/pppd/Makefile.linux
+===================================================================
+--- ppp-2.4.7.orig/pppd/Makefile.linux
++++ ppp-2.4.7/pppd/Makefile.linux
+@@ -120,10 +120,10 @@ CFLAGS   += -DHAS_SHADOW
  #LIBS     += -lshadow $(LIBS)
  endif
  

@@ -20,9 +21,9 @@ diff -urN ppp-2.4.5-orig/pppd/Makefile.linux ppp-2.4.5/pppd/Makefile.linux
 -endif
 +#endif
  
- ifdef NEEDDES
- ifndef USE_CRYPT
-@@ -169,10 +169,10 @@
+ ifdef USE_LIBUTIL
+ CFLAGS	+= -DHAVE_LOGWTMP=1
+@@ -177,10 +177,10 @@ LIBS	+= -ldl
  endif
  
  ifdef FILTER

index a5b1ff12e53..e475289f65f 100644
@@ -5,11 +5,11 @@ Signed-off-by: Phil Blundell <[email protected]>
 Signed-off-by: Saul Wold <[email protected]
 Upstream-Status: Inappropriate [configuration]
 
-Index: util-linux-2.22.1/configure.ac
+Index: util-linux-2.31/configure.ac
 ===================================================================
---- util-linux-2.22.1.orig/configure.ac
-+++ util-linux-2.22.1/configure.ac
-@@ -73,7 +73,10 @@ AC_SUBST([localstatedir])
+--- util-linux-2.31.orig/configure.ac
++++ util-linux-2.31/configure.ac
+@@ -89,7 +89,10 @@ AC_SUBST([runstatedir])
  usrbin_execdir='${exec_prefix}/bin'
  AC_SUBST([usrbin_execdir])
  

@@ -20,4 +20,4 @@ Index: util-linux-2.22.1/configure.ac
 +fi
  AC_SUBST([usrsbin_execdir])
  
- case $libdir in
+ AS_CASE([$libdir],

index 403b4825c9b..7ccbe1f44c6 100644
@@ -7,14 +7,15 @@ So remove ldconfig call from make install-libs
 
 Upstream-Status: Inappropriate [disable feature]
 
-diff -uNr zlib-1.2.6.orig/Makefile.in zlib-1.2.6/Makefile.in
---- zlib-1.2.6.orig/Makefile.in	2012-01-28 23:48:50.000000000 +0100
-+++ zlib-1.2.6/Makefile.in	2012-02-13 15:38:20.577700723 +0100
-@@ -199,7 +199,6 @@
+Index: zlib-1.2.11/Makefile.in
+===================================================================
+--- zlib-1.2.11.orig/Makefile.in
++++ zlib-1.2.11/Makefile.in
+@@ -322,7 +322,6 @@ install-libs: $(LIBS)
  	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
  	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
  	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
 -	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
  	fi
- 	cp zlib.3 $(DESTDIR)$(man3dir)
- 	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+ 	rm -f $(DESTDIR)$(man3dir)/zlib.3
+ 	cp $(SRCDIR)zlib.3 $(DESTDIR)$(man3dir)

index e95fe35f8f8..b246de8f5fd 100644
@@ -3,72 +3,84 @@ Obey LDFLAGS
 Signed-off-by: Christopher Larson <[email protected]>
 Upstream-Status: Pending
 
+Index: irda-utils-0.9.18/findchip/Makefile
+===================================================================
 --- irda-utils-0.9.18.orig/findchip/Makefile
 +++ irda-utils-0.9.18/findchip/Makefile
 @@ -65,5 +65,5 @@ install: findchip
-
- gfindchip: gfindchip.c
-	$(prn_cc)
+ 
+ gfindchip: gfindchip.c 
+ 	$(prn_cc)
 -	$(ECMD))$(CC) $(CFLAGS) `gtk-config --cflags`  $< -o $@ `gtk-config --libs`
 +	$(ECMD)$(CC) $(CFLAGS) $(LDFLAGS) `gtk-config --cflags`  $< -o $@ `gtk-config --libs`
-
+ 
+Index: irda-utils-0.9.18/irattach/Makefile
+===================================================================
 --- irda-utils-0.9.18.orig/irattach/Makefile
 +++ irda-utils-0.9.18/irattach/Makefile
 @@ -49,13 +49,13 @@ all: $(TARGETS)
-
+ 
  irattach: irattach.o util.o
-	$(prn_cc_o)
+ 	$(prn_cc_o)
 -	$(ECMD)$(CC) $(CFLAGS) irattach.o util.o -o $@
 +	$(ECMD)$(CC) $(CFLAGS) $(LDFLAGS) irattach.o util.o -o $@
-
-
-
+ 
+ 
+ 
  dongle_attach: dongle_attach.o
-	$(prn_cc_o)
+ 	$(prn_cc_o)
 -	$(ECMD)$(CC) $(CFLAGS) dongle_attach.o -o $@
 +	$(ECMD)$(CC) $(CFLAGS) $(LDFLAGS) dongle_attach.o -o $@
-
-
+ 
+ 
  install: $(TARGETS)
+Index: irda-utils-0.9.18/irdadump/Makefile
+===================================================================
 --- irda-utils-0.9.18.orig/irdadump/Makefile
 +++ irda-utils-0.9.18/irdadump/Makefile
 @@ -40,7 +40,7 @@ lib_irdadump.a: $(LIBIRDADUMP_OBJS)
-
+ 
  irdadump: $(IRDADUMP_OBJS) $(LIBIRDADUMP_TARGET)
-	$(prn_cc_o)
+ 	$(prn_cc_o)
 -	$(ECMD)$(CC) $(CFLAGS) `pkg-config --libs glib-2.0` -o  $(IRDADUMP_TARGET) $< $(LIBIRDADUMP_TARGET)
 +	$(ECMD)$(CC) $(CFLAGS) $(LDFLAGS) `pkg-config --libs glib-2.0` -o  $(IRDADUMP_TARGET) $< $(LIBIRDADUMP_TARGET)
-
-
+ 
+ 
  .c.o:
+Index: irda-utils-0.9.18/irdaping/Makefile
+===================================================================
 --- irda-utils-0.9.18.orig/irdaping/Makefile
 +++ irda-utils-0.9.18/irdaping/Makefile
 @@ -56,7 +56,7 @@ all: $(TARGETS)
-
+ 
  irdaping: $(OBJS)
-	$(prn_cc_o)
+ 	$(prn_cc_o)
 -	$(ECMD)$(CC) $(CFLAGS) $(OBJS) -o $@
 +	$(ECMD)$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) -o $@
-
-
+ 
+ 
  .c.o:
+Index: irda-utils-0.9.18/irnetd/Makefile
+===================================================================
 --- irda-utils-0.9.18.orig/irnetd/Makefile
 +++ irda-utils-0.9.18/irnetd/Makefile
 @@ -50,7 +50,7 @@ all: $(TARGETS)
-
+ 
  irnetd: $(OBJS)
-	$(prn_cc_o)
+ 	$(prn_cc_o)
 -	$(ECMD)$(CC) $(CFLAGS) $(OBJS) -o $@
 +	$(ECMD)$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) -o $@
-
-
+ 
+ 
  install: irnetd
+Index: irda-utils-0.9.18/psion/Makefile
+===================================================================
 --- irda-utils-0.9.18.orig/psion/Makefile
 +++ irda-utils-0.9.18/psion/Makefile
 @@ -25,4 +25,4 @@ install: $(PSION_TARGETS)
  CFLAGS += -g -I../include -Wall -Wstrict-prototypes $(RPM_OPT_FLAGS)
- irpsion5:
-	$(prn_cc_o)
+ irpsion5: 
+ 	$(prn_cc_o)
 -	$(ECMD)$(CC) $(CFLAGS) $(PSION_SRC) -o $@
 \ No newline at end of file
 +	$(ECMD)$(CC) $(CFLAGS) $(LDFLAGS) $(PSION_SRC) -o $@

deleted file mode 100644
index b9e585610f4..00000000000
@@ -1,45 +0,0 @@
-From 4170b98e0d5864ef4db1c5704a6e9428c3be9fb8 Mon Sep 17 00:00:00 2001
-From: Iryna Shcherbina <[email protected]>
-Date: Thu, 24 Aug 2017 18:01:43 +0200
-Subject: [PATCH] BUG: fix infinite loop when creating np.pad on an empty array
-
-Upstream-Status: Backport [https://github.com/numpy/numpy/pull/9599/commits/6f9ea0abbd305d53f9017debab3a3a591fe0e249]
-CVE: CVE-2017-12852
-Signed-off-by: Dengke Du <[email protected]>
----
- numpy/lib/arraypad.py            | 3 +++
- numpy/lib/tests/test_arraypad.py | 4 ++++
- 2 files changed, 7 insertions(+)
-
-diff --git a/numpy/lib/arraypad.py b/numpy/lib/arraypad.py
-index 2dad99c..294a689 100644
---- a/numpy/lib/arraypad.py
-+++ b/numpy/lib/arraypad.py
-@@ -1406,6 +1406,9 @@ def pad(array, pad_width, mode, **kwargs):
-             newmat = _append_min(newmat, pad_after, chunk_after, axis)
- 
-     elif mode == 'reflect':
-+        if narray.size == 0:
-+            raise ValueError("There aren't any elements to reflect in `array`")
-+
-         for axis, (pad_before, pad_after) in enumerate(pad_width):
-             # Recursive padding along any axis where `pad_amt` is too large
-             # for indexing tricks. We can only safely pad the original axis
-diff --git a/numpy/lib/tests/test_arraypad.py b/numpy/lib/tests/test_arraypad.py
-index 056aa45..0f71d32 100644
---- a/numpy/lib/tests/test_arraypad.py
-+++ b/numpy/lib/tests/test_arraypad.py
-@@ -1014,6 +1014,10 @@ class ValueError1(TestCase):
-         assert_raises(ValueError, pad, arr, ((-2, 3), (3, 2)),
-                       **kwargs)
- 
-+    def test_check_empty_array(self):
-+        assert_raises(ValueError, pad, [], 4, mode='reflect')
-+        assert_raises(ValueError, pad, np.ndarray(0), 4, mode='reflect')
-+
- 
- class ValueError2(TestCase):
-     def test_check_negative_pad_amount(self):
--- 
-2.8.1
-

index ffd6ced1361..516ccd7b9bd 100644
@@ -1,23 +1,24 @@
-From cc2ce6d8b6a3e6e2c8874896c10897034a80cd4f Mon Sep 17 00:00:00 2001
+From c8c6649b29a08f82e1d6761a6d62ce5f632313c5 Mon Sep 17 00:00:00 2001
 From: Alexander Kanavin <[email protected]>
 Date: Thu, 10 Dec 2015 13:20:30 +0200
-Subject: [PATCH] Don't search /usr and so on for libraries by default to avoid
- host contamination.
+Subject: [PATCH 1/3] Don't search /usr and so on for libraries by default to
+ avoid host contamination.
 
 Upstream-Status: Inappropriate (As the code stands, this is a hack)
 Signed-off-by: Ross Burton <[email protected]>
 Signed-off-by: Alexander Kanavin <[email protected]>
+
 ---
  numpy/distutils/system_info.py | 50 +++++-------------------------------------
  1 file changed, 6 insertions(+), 44 deletions(-)
 
-Index: numpy-1.13.1/numpy/distutils/system_info.py
-===================================================================
---- numpy-1.13.1.orig/numpy/distutils/system_info.py
-+++ numpy-1.13.1/numpy/distutils/system_info.py
-@@ -211,51 +211,13 @@ if sys.platform == 'win32':
-     default_x11_lib_dirs = []
-     default_x11_include_dirs = []
+diff --git a/numpy/distutils/system_info.py b/numpy/distutils/system_info.py
+index bea120c..544e056 100644
+--- a/numpy/distutils/system_info.py
++++ b/numpy/distutils/system_info.py
+@@ -262,51 +262,13 @@ if sys.platform == 'win32':
+             add_system_root(os.path.join(conda_dir, 'Library'))
+                         
  else:
 -    default_lib_dirs = libpaths(['/usr/local/lib', '/opt/lib', '/usr/lib',
 -                                 '/opt/local/lib', '/sw/lib'], platform_bits)

@@ -29,10 +30,7 @@ Index: numpy-1.13.1/numpy/distutils/system_info.py
 -                            '/opt/local/include', '/sw/include',
 -                            '/usr/include/suitesparse']
 -    default_src_dirs = ['.', '/usr/local/src', '/opt/src', '/sw/src']
-+    default_lib_dirs = libpaths(['/deadir/lib'], platform_bits)
-+    default_include_dirs = ['/deaddir/include']
-+    default_src_dirs = ['.', '/deaddir/src']
- 
+-
 -    default_x11_lib_dirs = libpaths(['/usr/X11R6/lib', '/usr/X11/lib',
 -                                     '/usr/lib'], platform_bits)
 -    default_x11_include_dirs = ['/usr/X11R6/include', '/usr/X11/include',

@@ -67,8 +65,15 @@ Index: numpy-1.13.1/numpy/distutils/system_info.py
 -    finally:
 -        if tmp is not None:
 -            tmp.close()
++    default_lib_dirs = libpaths(['/deadir/lib'], platform_bits)
++    default_include_dirs = ['/deaddir/include']
++    default_src_dirs = ['.', '/deaddir/src']
++
 +    default_x11_lib_dirs = libpaths(['/deaddir/lib'], platform_bits)
 +    default_x11_include_dirs = ['/deaddir/include']
  
  if os.path.join(sys.prefix, 'lib') not in default_lib_dirs:
      default_lib_dirs.insert(0, os.path.join(sys.prefix, 'lib'))
+-- 
+2.16.1
+

deleted file mode 100644
index eb8a71a2e28..00000000000
@@ -1,30 +0,0 @@
-From c560abff71f98a39a7401f08c2c13dad9ae7f15f Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <[email protected]>
-Date: Thu, 25 Feb 2016 01:23:32 -0500
-Subject: [PATCH] remove build path in comments
-
-It has build path in comments, so remove it.
-
-Upstream-Status: Inappropriate [openembedded specific]
-
-Signed-off-by: Hongxu Jia <[email protected]>
----
- numpy/distutils/misc_util.py | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/numpy/distutils/misc_util.py b/numpy/distutils/misc_util.py
-index 345e60f..dafb068 100644
---- a/numpy/distutils/misc_util.py
-+++ b/numpy/distutils/misc_util.py
-@@ -2254,7 +2254,7 @@ def generate_config_py(target):
-     from distutils.dir_util import mkpath
-     mkpath(os.path.dirname(target))
-     f = open(target, 'w')
--    f.write('# This file is generated by %s\n' % (os.path.abspath(sys.argv[0])))
-+    f.write('# This file is generated by %s\n' % (os.path.abspath(sys.argv[0]).replace(os.path.abspath('../'),'')))
-     f.write('# It contains system_info results at the time of building this package.\n')
-     f.write('__all__ = ["get_info","show"]\n\n')
-     for k, i in system_info.saved_results.items():
--- 
-1.9.1
-

similarity index 88%
rename from meta/recipes-devtools/python-numpy/python-numpy_1.13.1.bb
rename to meta/recipes-devtools/python-numpy/python-numpy_1.14.1.bb
index b6ec2308e41..6b5dd67fa3e 100644
@@ -1,19 +1,17 @@
 SUMMARY = "A sophisticated Numeric Processing Package for Python"
 SECTION = "devel/python"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=1002b09cd654fcaa2dcc87535acd9a96"
+LICENSE = "BSD-3-Clause & BSD-2-Clause & PSF & Apache-2.0 & BSD"
+LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=fc53b33304171d132128ebe82ea4a645"
 
 SRCNAME = "numpy"
 
 SRC_URI = "https://github.com/${SRCNAME}/${SRCNAME}/releases/download/v${PV}/${SRCNAME}-${PV}.tar.gz \
            file://0001-Don-t-search-usr-and-so-on-for-libraries-by-default-.patch \
-           file://remove-build-path-in-comments.patch \
            file://fix_shebang_f2py.patch \
-           file://0001-BUG-fix-infinite-loop-when-creating-np.pad-on-an-emp.patch \
            ${CONFIGFILESURI} "
 
-SRC_URI[md5sum] = "6d459e4a24f5035f720dda3c57716a92"
-SRC_URI[sha256sum] = "de020ec06f1e9ce1115a50161a38bf8d4c2525379900f9cb478cc613a1e7cd93"
+SRC_URI[md5sum] = "0e09f20f62ab9f8a02cb7bd3fd023482"
+SRC_URI[sha256sum] = "8708a775be9a9a457b80a49193c57bd9d51a8a195ed1f1c4b8e89eaf3aa646ee"
 
 UPSTREAM_CHECK_URI = "https://github.com/numpy/numpy/releases"
 UPSTREAM_CHECK_REGEX = "(?P<pver>\d+(\.\d+)+)\.tar"

similarity index 87%
rename from meta/recipes-devtools/python-numpy/python3-numpy_1.13.3.bb
rename to meta/recipes-devtools/python-numpy/python3-numpy_1.14.1.bb
index 553b0fac7f2..736e0f57f09 100644
@@ -1,18 +1,17 @@
 SUMMARY = "A sophisticated Numeric Processing Package for Python"
 SECTION = "devel/python"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=1002b09cd654fcaa2dcc87535acd9a96"
+LICENSE = "BSD-3-Clause & BSD-2-Clause & PSF & Apache-2.0 & BSD"
+LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=fc53b33304171d132128ebe82ea4a645"
 
 SRCNAME = "numpy"
 
 SRC_URI = "https://github.com/${SRCNAME}/${SRCNAME}/releases/download/v${PV}/${SRCNAME}-${PV}.tar.gz \
            file://0001-Don-t-search-usr-and-so-on-for-libraries-by-default-.patch \
-           file://remove-build-path-in-comments.patch \
            file://fix_shebang_f2py.patch \
-           file://0001-BUG-fix-infinite-loop-when-creating-np.pad-on-an-emp.patch \
-           ${CONFIGFILESURI} "
-SRC_URI[md5sum] = "c1d433e5973e548809e80c9118474b73"
-SRC_URI[sha256sum] = "4c6b4eef790528bebb7ec9590d74cc193868940fe68e4109a91c196df72d8094"
+           ${CONFIGFILESURI} \
+           "
+SRC_URI[md5sum] = "0e09f20f62ab9f8a02cb7bd3fd023482"
+SRC_URI[sha256sum] = "8708a775be9a9a457b80a49193c57bd9d51a8a195ed1f1c4b8e89eaf3aa646ee"
 
 UPSTREAM_CHECK_URI = "https://github.com/numpy/numpy/releases"
 UPSTREAM_CHECK_REGEX = "(?P<pver>\d+(\.\d+)+)\.tar"

index a97ff6b2506..506debaf761 100644
@@ -13,10 +13,10 @@ Signed-off-by: Jackie Huang <[email protected]>
  configure.ac | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-Index: Python-2.7.11/configure.ac
+Index: Python-2.7.13/configure.ac
 ===================================================================
---- Python-2.7.11.orig/configure.ac
-+++ Python-2.7.11/configure.ac
+--- Python-2.7.13.orig/configure.ac
++++ Python-2.7.13/configure.ac
 @@ -33,7 +33,7 @@ if test "$cross_compiling" = yes; then
  	    AC_MSG_ERROR([python$PACKAGE_VERSION interpreter not found])
  	fi

@@ -24,5 +24,5 @@ Index: Python-2.7.11/configure.ac
 -	PYTHON_FOR_BUILD='_PYTHON_PROJECT_BASE=$(abs_builddir) _PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) PYTHONPATH=$(shell test -f pybuilddir.txt && echo $(abs_builddir)/`cat pybuilddir.txt`:)$(srcdir)/Lib:$(srcdir)/Lib/$(PLATDIR) '$interp
 +	PYTHON_FOR_BUILD='_PYTHON_PROJECT_BASE=$(abs_builddir) _PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) PYTHONPATH=$(CROSSPYTHONPATH):$(shell test -f pybuilddir.txt && echo $(abs_builddir)/`cat pybuilddir.txt`:)$(srcdir)/Lib:$(srcdir)/Lib/plat-$(MACHDEP) '$interp
      fi
- elif test "$cross_compiling" = maybe; then
-     AC_MSG_ERROR([Cross compiling required --host=HOST-TUPLE and --build=ARCH])
+     # Used to comment out stuff for rebuilding generated files
+     GENERATED_COMMENT='#'

index 3347321fde6..287095f615c 100644
@@ -7,13 +7,16 @@ Upstream-Status: Inappropriate [distribution]
 Also simply disable the tk module since its not in DEPENDS.
 Signed-off-by: Andrei Gherzan <[email protected]>
 
-Index: Python-2.7.2/setup.py
+Index: Python-2.7.13/setup.py
 ===================================================================
---- Python-2.7.2.orig/setup.py	2012-04-05 23:18:38.500136647 +0300
-+++ Python-2.7.2/setup.py	2012-04-05 23:19:35.888134969 +0300
-@@ -1634,8 +1634,10 @@
+--- Python-2.7.13.orig/setup.py
++++ Python-2.7.13/setup.py
+@@ -1783,10 +1783,12 @@ class PyBuildExt(build_ext):
+         self.extensions.extend(exts)
+ 
          # Call the method for detecting whether _tkinter can be compiled
-         self.detect_tkinter(inc_dirs, lib_dirs)
+-        self.detect_tkinter(inc_dirs, lib_dirs)
++        # self.detect_tkinter(inc_dirs, lib_dirs)
  
 -        if '_tkinter' not in [e.name for e in self.extensions]:
 -            missing.append('_tkinter')

@@ -22,18 +25,5 @@ Index: Python-2.7.2/setup.py
 +        #if '_tkinter' not in [e.name for e in self.extensions]:
 +        #    missing.append('_tkinter')
  
-         return missing
- 
-diff --git Python-3.5.1.orig/setup.py Python-3.5.1/setup.py
-index b4633b9..d7588c0 100644
---- Python-3.5.1.orig/setup.py
-+++ Python-3.5.1/setup.py
-@@ -1536,7 +1536,7 @@ class PyBuildExt(build_ext):
-         self.extensions.extend(exts)
- 
-         # Call the method for detecting whether _tkinter can be compiled
--        self.detect_tkinter(inc_dirs, lib_dirs)
-+        # self.detect_tkinter(inc_dirs, lib_dirs)
- 
-         # tkinter module will not be avalaible as yocto
-         # doesn't have tk integrated (yet)
+ ##         # Uncomment these lines if you want to play with xxmodule.c
+ ##         ext = Extension('xx', ['xxmodule.c'])

index 337e0e3e29b..8ba58230144 100644
@@ -5,12 +5,12 @@ Upstream-Status: Inappropriate [distribution]
 
 Signed-off-by: Andrei Gherzan <[email protected]>
 
-Index: Python-2.7.2/setup.py
+Index: Python-2.7.13/setup.py
 ===================================================================
---- Python-2.7.2.orig/setup.py	2012-04-05 22:29:18.049196608 +0300
-+++ Python-2.7.2/setup.py	2012-04-05 22:29:57.505195453 +0300
-@@ -1522,8 +1522,9 @@
-         if platform == 'sunos5':
+--- Python-2.7.13.orig/setup.py
++++ Python-2.7.13/setup.py
+@@ -1671,8 +1671,9 @@ class PyBuildExt(build_ext):
+         if host_platform == 'sunos5':
              # SunOS specific modules
              exts.append( Extension('sunaudiodev', ['sunaudiodev.c']) )
 -        else:

@@ -19,5 +19,5 @@ Index: Python-2.7.2/setup.py
 +        #else:
 +        #    missing.append('sunaudiodev')
  
-         if platform == 'darwin':
+         if host_platform == 'darwin':
              # _scproxy

index 789929b715a..f9971c6bafd 100644
@@ -8,9 +8,11 @@ Upstream-Status: Inappropriate [OE specific]
  Makefile.pre.in |    6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
 
---- a/Makefile.pre.in
-+++ b/Makefile.pre.in
-@@ -1306,8 +1306,8 @@ touch:
+Index: Python-3.5.3/Makefile.pre.in
+===================================================================
+--- Python-3.5.3.orig/Makefile.pre.in
++++ Python-3.5.3/Makefile.pre.in
+@@ -1574,8 +1574,8 @@ touch:
  # Sanitation targets -- clean leaves libraries, executables and tags
  # files, which clobber removes as well
  pycremoval:

@@ -21,7 +23,7 @@ Upstream-Status: Inappropriate [OE specific]
  
  rmtestturds:
  	-rm -f *BAD *GOOD *SKIPPED
-@@ -1321,9 +1321,9 @@ docclean:
+@@ -1589,9 +1589,9 @@ docclean:
  	-rm -rf Doc/tools/sphinx Doc/tools/pygments Doc/tools/docutils
  
  clean: pycremoval

@@ -32,5 +34,5 @@ Upstream-Status: Inappropriate [OE specific]
 +	find . ! -path './ipkg-install/*' -name '*.s[ol]' -exec rm -f {} ';'
 +	find . ! -path './ipkg-install/*' -name '*.so.[0-9]*.[0-9]*' -exec rm -f {} ';'
  	find build -name 'fficonfig.h' -exec rm -f {} ';' || true
- 	find build -name 'fficonfig.py' -exec rm -f {} ';' || true
- 	-rm -f Lib/lib2to3/*Grammar*.pickle
+ 	find build -name '*.py' -exec rm -f {} ';' || true
+ 	find build -name '*.py[co]' -exec rm -f {} ';' || true

index 3347321fde6..a3cc48c9a4d 100644
@@ -7,13 +7,16 @@ Upstream-Status: Inappropriate [distribution]
 Also simply disable the tk module since its not in DEPENDS.
 Signed-off-by: Andrei Gherzan <[email protected]>
 
-Index: Python-2.7.2/setup.py
+Index: Python-3.5.3/setup.py
 ===================================================================
---- Python-2.7.2.orig/setup.py	2012-04-05 23:18:38.500136647 +0300
-+++ Python-2.7.2/setup.py	2012-04-05 23:19:35.888134969 +0300
-@@ -1634,8 +1634,10 @@
+--- Python-3.5.3.orig/setup.py
++++ Python-3.5.3/setup.py
+@@ -1558,10 +1558,12 @@ class PyBuildExt(build_ext):
+         self.extensions.extend(exts)
+ 
          # Call the method for detecting whether _tkinter can be compiled
-         self.detect_tkinter(inc_dirs, lib_dirs)
+-        self.detect_tkinter(inc_dirs, lib_dirs)
++        # self.detect_tkinter(inc_dirs, lib_dirs)
  
 -        if '_tkinter' not in [e.name for e in self.extensions]:
 -            missing.append('_tkinter')

@@ -22,18 +25,5 @@ Index: Python-2.7.2/setup.py
 +        #if '_tkinter' not in [e.name for e in self.extensions]:
 +        #    missing.append('_tkinter')
  
-         return missing
- 
-diff --git Python-3.5.1.orig/setup.py Python-3.5.1/setup.py
-index b4633b9..d7588c0 100644
---- Python-3.5.1.orig/setup.py
-+++ Python-3.5.1/setup.py
-@@ -1536,7 +1536,7 @@ class PyBuildExt(build_ext):
-         self.extensions.extend(exts)
- 
-         # Call the method for detecting whether _tkinter can be compiled
--        self.detect_tkinter(inc_dirs, lib_dirs)
-+        # self.detect_tkinter(inc_dirs, lib_dirs)
- 
-         # tkinter module will not be avalaible as yocto
-         # doesn't have tk integrated (yet)
+ ##         # Uncomment these lines if you want to play with xxmodule.c
+ ##         ext = Extension('xx', ['xxmodule.c'])

index 74490d93a5f..211f9e78890 100644
@@ -10,19 +10,16 @@ Signed-off-by: Jackie Huang <[email protected]>
  configure.ac | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/configure.ac b/configure.ac
-index 989baf9..2890c96 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -67,7 +67,7 @@ if test "$cross_compiling" = yes; then
+Index: Python-3.5.3/configure.ac
+===================================================================
+--- Python-3.5.3.orig/configure.ac
++++ Python-3.5.3/configure.ac
+@@ -78,7 +78,7 @@ if test "$cross_compiling" = yes; then
  	    AC_MSG_ERROR([python$PACKAGE_VERSION interpreter not found])
  	fi
          AC_MSG_RESULT($interp)
 -	PYTHON_FOR_BUILD='_PYTHON_PROJECT_BASE=$(abs_builddir) _PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) PYTHONPATH=$(shell test -f pybuilddir.txt && echo $(abs_builddir)/`cat pybuilddir.txt`:)$(srcdir)/Lib:$(srcdir)/Lib/$(PLATDIR) '$interp
 +	PYTHON_FOR_BUILD='_PYTHON_PROJECT_BASE=$(abs_builddir) _PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) PYTHONPATH=$(CROSSPYTHONPATH) '$interp
      fi
- elif test "$cross_compiling" = maybe; then
-     AC_MSG_ERROR([Cross compiling required --host=HOST-TUPLE and --build=ARCH])
--- 
-2.0.1
-
+     # Used to comment out stuff for rebuilding generated files
+     GENERATED_COMMENT='#'

index de07643f2bb..c89d9a3d836 100644
@@ -17,12 +17,12 @@ Signed-off-by: Robert Yang <[email protected]>
  Lib/sysconfig.py           |    5 ++++-
  2 files changed, 8 insertions(+), 2 deletions(-)
 
-diff --git a/Lib/distutils/sysconfig.py b/Lib/distutils/sysconfig.py
-index a545ab9..74317d1 100644
---- a/Lib/distutils/sysconfig.py
-+++ b/Lib/distutils/sysconfig.py
-@@ -554,7 +554,10 @@ def get_config_vars(*args):
-         _config_vars['exec_prefix'] = EXEC_PREFIX
+Index: Python-3.5.3/Lib/distutils/sysconfig.py
+===================================================================
+--- Python-3.5.3.orig/Lib/distutils/sysconfig.py
++++ Python-3.5.3/Lib/distutils/sysconfig.py
+@@ -498,7 +498,10 @@ def get_config_vars(*args):
+             _config_vars['SO'] = SO
  
          # Always convert srcdir to an absolute path
 -        srcdir = _config_vars.get('srcdir', project_base)

@@ -33,11 +33,11 @@ index a545ab9..74317d1 100644
          if os.name == 'posix':
              if python_build:
                  # If srcdir is a relative path (typically '.' or '..')
-diff --git a/Lib/sysconfig.py b/Lib/sysconfig.py
-index 7287f11..cc92998 100644
---- a/Lib/sysconfig.py
-+++ b/Lib/sysconfig.py
-@@ -562,7 +562,10 @@ def get_config_vars(*args):
+Index: Python-3.5.3/Lib/sysconfig.py
+===================================================================
+--- Python-3.5.3.orig/Lib/sysconfig.py
++++ Python-3.5.3/Lib/sysconfig.py
+@@ -544,7 +544,10 @@ def get_config_vars(*args):
          _CONFIG_VARS['userbase'] = _getuserbase()
  
          # Always convert srcdir to an absolute path

@@ -49,6 +49,3 @@ index 7287f11..cc92998 100644
          if os.name == 'posix':
              if _PYTHON_BUILD:
                  # If srcdir is a relative path (typically '.' or '..')
--- 
-1.7.9.5
-

index fd8237fe796..c1db335e0d6 100644
@@ -12,10 +12,10 @@ Signed-off-by: Hongxu Jia <[email protected]>
  Makefile.SH | 147 ++++++++++++++++++++++++++++--------------------------------
  1 file changed, 68 insertions(+), 79 deletions(-)
 
-diff --git a/Makefile.SH b/Makefile.SH
-index 916b332..b143d46 100755
---- a/Makefile.SH
-+++ b/Makefile.SH
+Index: perl-5.24.1/Makefile.SH
+===================================================================
+--- perl-5.24.1.orig/Makefile.SH
++++ perl-5.24.1/Makefile.SH
 @@ -48,10 +48,10 @@ case "$useshrplib" in
  true)
  	# Prefix all runs of 'miniperl' and 'perl' with

@@ -74,6 +74,10 @@ index 916b332..b143d46 100755
 -all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make $(MANIFEST_SRT)
 -	@echo " ";
 -	@echo "	Everything is up to date. Type '$(MAKE) test' to run test suite."
+-
+-$(MANIFEST_SRT):	MANIFEST $(PERL_EXE)
+-	@$(RUN_PERL) Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \
+-	    $(RUN_PERL) Porting/manisort -q -o MANIFEST; sh -c true)
 +#all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make $(MANIFEST_SRT)
 +#	@echo " ";
 +#	@echo "	Everything is up to date. Type '$(MAKE) test' to run test suite."

@@ -83,10 +87,7 @@ index 916b332..b143d46 100755
 +more: $(generated_pods) $(private) $(public)
 +
 +more2: $(dynamic_ext)
- 
--$(MANIFEST_SRT):	MANIFEST $(PERL_EXE)
--	@$(RUN_PERL) Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \
--	    $(RUN_PERL) Porting/manisort -q -o MANIFEST; sh -c true)
++
 +more3: $(nonxs_ext)
 +
 +more4: extras.make $(MANIFEST_SRT)

@@ -151,7 +152,7 @@ index 916b332..b143d46 100755
  	./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
  
  !NO!SUBS!
-@@ -878,7 +878,7 @@ $(LIBPERL): $& $(perllib_objs) $(DYNALOADER) $(LIBPERLEXPORT)
+@@ -878,7 +878,7 @@ $(LIBPERL): $& $(perllib_objs) $(DYNALOA
  	true)
  		$spitshell >>$Makefile <<'!NO!SUBS!'
  	rm -f $@

@@ -160,7 +161,7 @@ index 916b332..b143d46 100755
  !NO!SUBS!
  		case "$osname" in
  		aix)
-@@ -936,15 +936,19 @@ lib/buildcustomize.pl: $& $(miniperl_objs) write_buildcustomize.pl
+@@ -936,15 +936,19 @@ lib/buildcustomize.pl: $& $(miniperl_obj
  		$spitshell >>$Makefile <<'!NO!SUBS!'
  lib/buildcustomize.pl: $& $(miniperl_objs)
  	$(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(miniperl_objs) $(libs)

@@ -183,7 +184,7 @@ index 916b332..b143d46 100755
  	$(MINIPERL) -f write_buildcustomize.pl    
  !NO!SUBS!
  		;;
-@@ -966,7 +970,9 @@ lib/buildcustomize.pl: $& $(miniperl_objs) write_buildcustomize.pl
+@@ -966,7 +970,9 @@ lib/buildcustomize.pl: $& $(miniperl_obj
  	-@rm -f miniperl.xok
  	$(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
  	    $(miniperl_objs) $(libs)

@@ -194,7 +195,7 @@ index 916b332..b143d46 100755
  	$(MINIPERL) -f write_buildcustomize.pl
  !NO!SUBS!
  		;;
-@@ -977,7 +983,9 @@ lib/buildcustomize.pl: \$& \$(miniperl_objs) write_buildcustomize.pl
+@@ -977,7 +983,9 @@ lib/buildcustomize.pl: \$& \$(miniperl_o
  	-@rm -f miniperl.xok
  	-@rm \$(MINIPERL_EXE)
  	\$(LNS) \$(HOST_PERL) \$(MINIPERL_EXE)

@@ -205,7 +206,7 @@ index 916b332..b143d46 100755
  	\$(MINIPERL) -f write_buildcustomize.pl 'osname' "$osname"
  !GROK!THIS!
  		else
-@@ -986,7 +994,9 @@ lib/buildcustomize.pl: $& $(miniperl_objs) write_buildcustomize.pl
+@@ -986,7 +994,9 @@ lib/buildcustomize.pl: $& $(miniperl_obj
  	-@rm -f miniperl.xok
  	$(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
  	    $(miniperl_objs) $(libs)

@@ -225,7 +226,7 @@ index 916b332..b143d46 100755
  	-@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
  	(cd ext/Devel-PPPort && `pwd`/run.sh ../../$(MINIPERL_EXE) -I../../lib \$\$f); \
  	done
-@@ -1046,7 +1056,7 @@ makeppport: \$(MINIPERL_EXE) \$(CONFIGPM)
+@@ -1046,7 +1056,7 @@ makeppport: \$(MINIPERL_EXE) \$(CONFIGPM
  *)
  $spitshell >>$Makefile <<'!NO!SUBS!'
  .PHONY: makeppport

@@ -254,7 +255,7 @@ index 916b332..b143d46 100755
  	$(MINIPERL) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
  #	Commented out so always runs, mktables looks at far more files than we
  #	can in this makefile to decide if needs to run or not
-@@ -1074,12 +1084,12 @@ uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
+@@ -1074,12 +1084,12 @@ uni.data: $(MINIPERL_EXE) $(CONFIGPM) li
  # $(PERL_EXE) and ext because pod_lib.pl needs Digest::MD5
  # But also this ensures that all extensions are built before we try to scan
  # them, which picks up Devel::PPPort's documentation.

@@ -270,9 +271,9 @@ index 916b332..b143d46 100755
  	$(MINIPERL) autodoc.pl
  
  pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
-@@ -1089,7 +1099,7 @@ pod/perl5240delta.pod: pod/perldelta.pod
- 	$(RMS) pod/perl5240delta.pod
- 	$(LNS) perldelta.pod pod/perl5240delta.pod
+@@ -1089,7 +1099,7 @@ pod/perl5241delta.pod: pod/perldelta.pod
+ 	$(RMS) pod/perl5241delta.pod
+ 	$(LNS) perldelta.pod pod/perl5241delta.pod
  
 -extra.pods: $(MINIPERL_EXE)
 +extra.pods:

@@ -345,7 +346,7 @@ index 916b332..b143d46 100755
  	$(MINIPERL) make_ext.pl $@ $(MAKE_EXT_ARGS) MAKE="$(MAKE)" LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
  
  n_dummy $(nonxs_ext):	$(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE
-@@ -1479,14 +1468,14 @@ test_prep_pre: preplibrary utilities $(nonxs_ext)
+@@ -1479,14 +1468,14 @@ test_prep_pre: preplibrary utilities $(n
  
  case "$targethost" in
  '') $spitshell >>$Makefile <<'!NO!SUBS!'

@@ -362,7 +363,7 @@ index 916b332..b143d46 100755
  	\$(dynamic_ext) \$(TEST_PERL_DLL) runtests \
  	\$(generated_pods)
  	$to libperl.*
-@@ -1539,7 +1528,7 @@ test_prep test-prep: test_prep_pre \$(MINIPERL_EXE) \$(unidatafiles) \$(PERL_EXE
+@@ -1539,7 +1528,7 @@ test_prep test-prep: test_prep_pre \$(MI
  esac
  
  $spitshell >>$Makefile <<'!NO!SUBS!'

@@ -380,6 +381,3 @@ index 916b332..b143d46 100755
  	- cd t && $(RUN_PERL) TEST $(MINITEST_TESTS) <$(devtty)
  
  minitest-notty minitest_notty: $(MINIPERL_EXE) minitest_prep
--- 
-2.1.4
-

index a00ad61d901..33e222259f7 100644
@@ -1,15 +1,15 @@
 Upstream-Status:Inappropriate [embedded specific]
 
-Index: perl-5.14.2/Makefile.SH
+Index: perl-5.24.1/Makefile.SH
 ===================================================================
---- perl-5.14.2.orig/Makefile.SH
-+++ perl-5.14.2/Makefile.SH
-@@ -622,7 +622,7 @@ bitcount.h: generate_uudmap$(HOST_EXE_EX
- 	$(RUN) ./generate_uudmap$(HOST_EXE_EXT) uudmap.h bitcount.h
+--- perl-5.24.1.orig/Makefile.SH
++++ perl-5.24.1/Makefile.SH
+@@ -710,7 +710,7 @@ bitcount.h: generate_uudmap\$(HOST_EXE_E
  
+ $spitshell >>$Makefile <<'!NO!SUBS!'
  generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
 -	$(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
 +	$(BUILD_CC) -o generate_uudmap$(EXE_EXT) generate_uudmap.c
  
- miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
- 	$(CCCMD) $(PLDLFLAGS) $*.c
+ !NO!SUBS!
+ ;;

index 76501283ed4..49efcbeefcd 100644
@@ -10,15 +10,15 @@ This fixes this warning for perl recipe as well as libxml-parser-perl recipe.
 It is a fix to MakeMaker within perl, so all such perl recipes will get 
 fixed with this perl fix.
 
-Index: perl-5.14.2/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Liblist/Kid.pm
+Index: perl-5.24.1/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Liblist/Kid.pm
 ===================================================================
---- perl-5.14.2.orig/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Liblist/Kid.pm
-+++ perl-5.14.2/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Liblist/Kid.pm
-@@ -55,6 +55,7 @@ sub _unix_os2_ext {
-     my($found) = 0;
+--- perl-5.24.1.orig/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Liblist/Kid.pm
++++ perl-5.24.1/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Liblist/Kid.pm
+@@ -57,6 +57,7 @@ sub _unix_os2_ext {
+     my ( $found ) = 0;
  
      # Debian-specific: don't use LD_RUN_PATH for standard dirs
 +    push(@libpath, "SYSROOTLIB");
      $ld_run_path_seen{$_}++ for @libpath;
  
-     foreach my $thislib (split ' ', $potential_libs) {
+     foreach my $thislib ( split ' ', $potential_libs ) {

index 456012376e6..7fd1f50144e 100644
@@ -1,12 +1,12 @@
 Upstream-Status:Inappropriate [embedded specific]
 
-Index: perl-5.12.3/installperl
+Index: perl-5.24.1/installperl
 ===================================================================
---- perl-5.12.3.orig/installperl
-+++ perl-5.12.3/installperl
-@@ -3,8 +3,8 @@
+--- perl-5.24.1.orig/installperl
++++ perl-5.24.1/installperl
+@@ -2,8 +2,8 @@
+ 
  BEGIN {
-     require 5.004;
      chdir '..' if !-d 'lib' and -d '../lib';
 -    @INC = 'lib';
 -    $ENV{PERL5LIB} = 'lib';

@@ -14,4 +14,4 @@ Index: perl-5.12.3/installperl
 +#    $ENV{PERL5LIB} = 'lib';
  
      # This needs to be at BEGIN time, before any use of Config
-     require './install_lib.pl';
+     # install_lib itself loads and imports Config into main::

index de6f65294cc..b2c597974e2 100644
@@ -10,10 +10,10 @@ Signed-off-by: Hongxu Jia <[email protected]>
  make_ext.pl | 4 ++++
  1 file changed, 4 insertions(+)
 
-diff --git a/make_ext.pl b/make_ext.pl
-index b433762..9fc1a36 100644
---- a/make_ext.pl
-+++ b/make_ext.pl
+Index: perl-5.24.1/make_ext.pl
+===================================================================
+--- perl-5.24.1.orig/make_ext.pl
++++ perl-5.24.1/make_ext.pl
 @@ -335,6 +335,10 @@ sub build_extension {
                  print "Deleting non-Cross makefile\n";
                  close $mfh or die "close $makefile: $!";

@@ -24,7 +24,4 @@ index b433762..9fc1a36 100644
 +                }
              }
          }
-     }
--- 
-1.8.1.2
-
+     } else {

index d912d0031e4..37bf5233571 100644
@@ -25,16 +25,16 @@ Upstream-Status:Inappropriate [embedded specific]
 
 Signed-off-by: Tom Zanussi <[email protected]>
 
-Index: perl-5.14.2/config_h.SH
+Index: perl-5.24.1/config_h.SH
 ===================================================================
---- perl-5.14.2.orig/config_h.SH
-+++ perl-5.14.2/config_h.SH
-@@ -996,7 +996,7 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#und
+--- perl-5.24.1.orig/config_h.SH
++++ perl-5.24.1/config_h.SH
+@@ -1434,7 +1434,7 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#und
   *	in programs that are not prepared to deal with ~ expansion at run-time.
   */
  #$d_archlib ARCHLIB "$archlib"		/**/
 -#$d_archlib ARCHLIB_EXP "$archlibexp"		/**/
 +#$d_archlib ARCHLIB_EXP "$archlib_exp"		/**/
  
- /* ARCHNAME:
-  *	This symbol holds a string representing the architecture name.
+ /* BIN:
+  *	This symbol holds the path of the bin directory where the package will

index 035beba66ac..2572067a6e1 100644
@@ -7,13 +7,13 @@ system.
 
 Update by Nitin A Kamble <[email protected]> 2011/04/21
 
-Index: perl-5.14.2/dist/XSLoader/XSLoader_pm.PL
+Index: perl-5.24.1/dist/XSLoader/XSLoader_pm.PL
 ===================================================================
---- perl-5.14.2.orig/dist/XSLoader/XSLoader_pm.PL
-+++ perl-5.14.2/dist/XSLoader/XSLoader_pm.PL
-@@ -28,6 +28,20 @@ sub load {
- 
-     my ($module, $modlibname) = caller();
+--- perl-5.24.1.orig/dist/XSLoader/XSLoader_pm.PL
++++ perl-5.24.1/dist/XSLoader/XSLoader_pm.PL
+@@ -52,6 +52,20 @@ sub load {
+     my ($caller, $modlibname) = caller();
+     my $module = $caller;
  
 +    # OE: Allow env to form dynamic loader to look in a different place
 +    # This is so it finds the host .so files, not the targets

@@ -30,5 +30,5 @@ Index: perl-5.14.2/dist/XSLoader/XSLoader_pm.PL
 +    }
 +
      if (@_) {
- 	$module = $_[0];
+         $module = $_[0];
      } else {

index aa83fca5ae8..bad3373fd40 100644
@@ -1,12 +1,12 @@
 Upstream-Status:Inappropriate [embedded specific]
 
-Index: perl-5.8.8/config_h.SH
+Index: perl-5.24.1/config_h.SH
 ===================================================================
---- perl-5.8.8.orig/config_h.SH	2005-11-01 02:13:05.000000000 +0800
-+++ perl-5.8.8/config_h.SH	2010-11-01 17:06:07.215219738 +0800
-@@ -709,6 +709,12 @@
+--- perl-5.24.1.orig/config_h.SH
++++ perl-5.24.1/config_h.SH
+@@ -726,6 +726,12 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#und
   */
- #$i_float I_FLOAT		/**/
+ #$i_gdbm I_GDBM	/**/
  
 +/* I_GDBM:
 + *      This symbol, if defined, indicates that <gdbm.h> exists and should

deleted file mode 100644
index bad3373fd40..00000000000
@@ -1,19 +0,0 @@
-Upstream-Status:Inappropriate [embedded specific]
-
-Index: perl-5.24.1/config_h.SH
-===================================================================
---- perl-5.24.1.orig/config_h.SH
-+++ perl-5.24.1/config_h.SH
-@@ -726,6 +726,12 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#und
-  */
- #$i_gdbm I_GDBM	/**/
- 
-+/* I_GDBM:
-+ *      This symbol, if defined, indicates that <gdbm.h> exists and should
-+ *      be included.
-+ */
-+#$i_gdbm I_GDBM /**/
-+
- /* I_LIMITS:
-  *	This symbol, if defined, indicates to the C program that it should
-  *	include <limits.h> to get definition of symbols like WORD_BIT or

index f13a63a80a3..e5b4886a95d 100644
@@ -45,7 +45,6 @@ SRC_URI += " \
         file://letgcc-find-errno.patch \
         file://generate-sh.patch \
         file://native-perlinc.patch \
-        file://perl-enable-gdbm.patch \
         file://cross-generate_uudmap.patch \
         file://fix_bad_rpath.patch \
         file://dynaloaderhack.patch \