3.18.99-stable review

This is the start of the stable review cycle for the 3.18.99 release. There are 21 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Mon Mar 12 00:17:44 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.99-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.18.99-rc1

Mike Snitzer <[email protected]>
dm io: fix duplicate bio completion due to missing ref count

Stefano Brivio <[email protected]>
fib_semantics: Don't match route with mismatching tclassid

Sabrina Dubroca <[email protected]>
net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68

Alexey Kodanev <[email protected]>
sctp: verify size of a new chunk in _sctp_make_chunk()

Julian Wiedmann <[email protected]>
s390/qeth: fix IPA command submission race

Julian Wiedmann <[email protected]>
s390/qeth: fix SETIP command handling

Alexey Kodanev <[email protected]>
sctp: fix dst refcnt leak in sctp_v6_get_dst()

Alexey Kodanev <[email protected]>
udplite: fix partial checksum initialization

Guillaume Nault <[email protected]>
ppp: prevent unregistered channels from connecting to PPP units

Nicolas Dichtel <[email protected]>
netlink: ensure to loop over all netns in genlmsg_multicast_allns()

Jakub Kicinski <[email protected]>
net: fix race on decreasing number of TX queues

Arnd Bergmann <[email protected]>
ipv6 sit: work around bogus gcc-8 -Wrestrict warning

Denis Du <[email protected]>
hdlc_ppp: carrier detect ok, don't turn off negotiation

Xin Long <[email protected]>
bridge: check brport attr show in brport_show

Nathan Sullivan <[email protected]>
leds: do not overflow sysfs buffer in led_trigger_show

Lucas Stach <[email protected]>
net: fec: introduce fec_ptp_stop and use in probe fail path

Ulf Magnusson <[email protected]>

    ARM: mvebu: Fix broken PL310_ERRATA_753970 selects

Viresh Kumar <[email protected]>
cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()

Erik Veijola <[email protected]>
ALSA: usb-audio: Add a quirck for B&W PX headphones

Jeremy Boone <[email protected]>
tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus

Jeremy Boone <[email protected]>
tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus

-------------

Diffstat:

 Makefile                                  |  4 +--
 arch/arm/mach-mvebu/Kconfig               |  4 +--
 drivers/char/tpm/tpm_i2c_infineon.c       |  5 ++--
 drivers/char/tpm/tpm_i2c_nuvoton.c        |  8 ++++--
 drivers/cpufreq/s3c24xx-cpufreq.c         |  8 +++++-
 drivers/leds/led-triggers.c               | 12 ++++----
 drivers/md/dm-io.c                        |  1 +
 drivers/net/ethernet/freescale/fec.h      |  1 +
 drivers/net/ethernet/freescale/fec_main.c |  5 ++--
 drivers/net/ethernet/freescale/fec_ptp.c  | 10 +++++++
 drivers/net/ppp/ppp_generic.c             |  9 ++++++
 drivers/net/wan/hdlc_ppp.c                |  5 +++-
 drivers/s390/net/qeth_core.h              |  5 ++++
 drivers/s390/net/qeth_core_main.c         | 33 ++++++++++++----------
 include/net/udplite.h                     |  1 +
 net/bridge/br_sysfs_if.c                  |  3 ++
 net/core/dev.c                            | 11 ++++++--
 net/ipv4/fib_semantics.c                  |  5 ++++
 net/ipv4/route.c                          |  7 +++--
 net/ipv4/udp.c                            |  5 ++++
 net/ipv6/ip6_checksum.c                   |  5 ++++
 net/ipv6/sit.c                            |  2 +-
 net/netlink/genetlink.c                   | 12 ++++++--
 net/sctp/ipv6.c                           | 10 +++++--
 net/sctp/sm_make_chunk.c                  |  8 ++++--
 sound/usb/quirks-table.h                  | 47 +++++++++++++++++++++++++++++++
 26 files changed, 181 insertions(+), 45 deletions(-)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeremy Boone <[email protected]>

commit 9b8cb28d7c62568a5916bdd7ea1c9176d7f8f2ed upstream.

Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header.

---
 drivers/char/tpm/tpm_i2c_infineon.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -436,7 +436,8 @@ static int recv_data(struct tpm_chip *ch
 static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	int size = 0;
-	int expected, status;
+	int status;
+	u32 expected;
 
 	if (count < TPM_HEADER_SIZE) {
 		size = -EIO;

@@ -451,7 +452,7 @@ static int tpm_tis_i2c_recv(struct tpm_c
 	}
 
 	expected = be32_to_cpu(*(__be32 *)(buf + 2));
-	if ((size_t) expected > count) {
+	if (((size_t) expected > count) || (expected < TPM_HEADER_SIZE)) {
 		size = -EIO;
 		goto out;
 	}

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeremy Boone <[email protected]>

commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream.

Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header.

---
 drivers/char/tpm/tpm_i2c_nuvoton.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -267,7 +267,11 @@ static int i2c_nuvoton_recv(struct tpm_c
 	struct device *dev = chip->dev;
 	struct i2c_client *client = to_i2c_client(dev);
 	s32 rc;
-	int expected, status, burst_count, retries, size = 0;
+	int status;
+	int burst_count;
+	int retries;
+	int size = 0;
+	u32 expected;
 
 	if (count < TPM_HEADER_SIZE) {
 		i2c_nuvoton_ready(chip);    /* return to idle */

@@ -309,7 +313,7 @@ static int i2c_nuvoton_recv(struct tpm_c
 		 * to machine native
 		 */
 		expected = be32_to_cpu(*(__be32 *) (buf + 2));
-		if (expected > count) {
+		if (expected > count || expected < size) {
 			dev_err(dev, "%s() expected > count\n", __func__);
 			size = -EIO;
 			continue;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Erik Veijola <[email protected]>

commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream.

The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates.

---
 sound/usb/quirks-table.h |   47 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

@@ -3312,4 +3312,51 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge
 	}
 },
 
+{
+	/*
+	 * Bower's & Wilkins PX headphones only support the 48 kHz sample rate
+	 * even though it advertises more. The capture interface doesn't work
+	 * even on windows.
+	 */
+	USB_DEVICE(0x19b5, 0x0021),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_MIXER,
+			},
+			/* Capture */
+			{
+				.ifnum = 1,
+				.type = QUIRK_IGNORE_INTERFACE,
+			},
+			/* Playback */
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S16_LE,
+					.channels = 2,
+					.iface = 2,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.attributes = UAC_EP_CS_ATTR_FILL_MAX |
+						UAC_EP_CS_ATTR_SAMPLE_RATE,
+					.endpoint = 0x03,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC,
+					.rates = SNDRV_PCM_RATE_48000,
+					.rate_min = 48000,
+					.rate_max = 48000,
+					.nr_rates = 1,
+					.rate_table = (unsigned int[]) {
+						48000
+					}
+				}
+			},
+		}
+	}
+},
+
 #undef USB_DEVICE_VENDOR_SPEC

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <[email protected]>

commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream.

commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412.

These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL.

Fix this by calling cpufreq_table_validate_and_show() conditionally again.

---
 drivers/cpufreq/s3c24xx-cpufreq.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -364,7 +364,13 @@ struct clk *s3c_cpufreq_clk_get(struct d
 static int s3c_cpufreq_init(struct cpufreq_policy *policy)
 {
 	policy->clk = clk_arm;
-	return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency);
+
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		return cpufreq_table_validate_and_show(policy, ftab);
+
+	return 0;
 }
 
 static int __init s3c_cpufreq_initclks(void)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ulf Magnusson <[email protected]>

commit 8aa36a8dcde3183d84db7b0d622ffddcebb61077 upstream.

The MACH_ARMADA_375 and MACH_ARMADA_38X boards select ARM_ERRATA_753970, but it was renamed to PL310_ERRATA_753970 by commit fa0ce4035d48 ("ARM:
7162/1: errata: tidy up Kconfig options for PL310 errata workarounds").

Fix the selects to use the new name.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.

PL310 errata workarounds"

---
 arch/arm/mach-mvebu/Kconfig |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -37,7 +37,7 @@ config MACH_ARMADA_370
 config MACH_ARMADA_375
 	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARMADA_375_CLK
 	select HAVE_ARM_SCU

@@ -52,7 +52,7 @@ config MACH_ARMADA_375
 config MACH_ARMADA_38X
 	bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARMADA_38X_CLK
 	select HAVE_ARM_SCU

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lucas Stach <[email protected]>

commit 32cba57ba74be58589aeb4cb6496183e46a5e3e5 upstream.

This function frees resources and cancels delayed work item that have been initialized in fec_ptp_init().

Use this to do proper error handling if something goes wrong in probe function after fec_ptp_init has been called.

---
 drivers/net/ethernet/freescale/fec.h      |    1 +
 drivers/net/ethernet/freescale/fec_main.c |    5 ++---
 drivers/net/ethernet/freescale/fec_ptp.c  |   10 ++++++++++
 3 files changed, 13 insertions(+), 3 deletions(-)

@@ -546,6 +546,7 @@ struct fec_enet_private {
 };
 
 void fec_ptp_init(struct platform_device *pdev);
+void fec_ptp_stop(struct platform_device *pdev);
 void fec_ptp_start_cyclecounter(struct net_device *ndev);
 int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr);
 int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr);

@@ -3312,6 +3312,7 @@ failed_register:
 failed_mii_init:
 failed_irq:
 failed_init:
+	fec_ptp_stop(pdev);
 	if (fep->reg_phy)
 		regulator_disable(fep->reg_phy);
 failed_regulator:

@@ -3331,14 +3332,12 @@ fec_drv_remove(struct platform_device *p
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
-	cancel_delayed_work_sync(&fep->time_keep);
 	cancel_work_sync(&fep->tx_timeout_work);
+	fec_ptp_stop(pdev);
 	unregister_netdev(ndev);
 	fec_enet_mii_remove(fep);
 	if (fep->reg_phy)
 		regulator_disable(fep->reg_phy);
-	if (fep->ptp_clock)
-		ptp_clock_unregister(fep->ptp_clock);
 	fec_enet_clk_enable(ndev, false);
 	of_node_put(fep->phy_node);
 	free_netdev(ndev);

@@ -620,6 +620,16 @@ void fec_ptp_init(struct platform_device
 	schedule_delayed_work(&fep->time_keep, HZ);
 }
 
+void fec_ptp_stop(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct fec_enet_private *fep = netdev_priv(ndev);
+
+	cancel_delayed_work_sync(&fep->time_keep);
+	if (fep->ptp_clock)
+		ptp_clock_unregister(fep->ptp_clock);
+}
+
 /**
  * fec_ptp_check_pps_event
  * @fep: the fec_enet_private structure handle

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nathan Sullivan <[email protected]>

commit 3b9b95363c45365d606ad4bbba16acca75fdf6d3 upstream.

Per the documentation, use scnprintf instead of sprintf to ensure there is never more than PAGE_SIZE bytes of trigger names put into the buffer.

---
 drivers/leds/led-triggers.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

@@ -78,21 +78,23 @@ ssize_t led_trigger_show(struct device *
 	down_read(&led_cdev->trigger_lock);
 
 	if (!led_cdev->trigger)
-		len += sprintf(buf+len, "[none] ");
+		len += scnprintf(buf+len, PAGE_SIZE - len, "[none] ");
 	else
-		len += sprintf(buf+len, "none ");
+		len += scnprintf(buf+len, PAGE_SIZE - len, "none ");
 
 	list_for_each_entry(trig, &trigger_list, next_trig) {
 		if (led_cdev->trigger && !strcmp(led_cdev->trigger->name,
 							trig->name))
-			len += sprintf(buf+len, "[%s] ", trig->name);
+			len += scnprintf(buf+len, PAGE_SIZE - len, "[%s] ",
+					 trig->name);
 		else
-			len += sprintf(buf+len, "%s ", trig->name);
+			len += scnprintf(buf+len, PAGE_SIZE - len, "%s ",
+					 trig->name);
 	}
 	up_read(&led_cdev->trigger_lock);
 	up_read(&triggers_list_lock);
 
-	len += sprintf(len+buf, "\n");
+	len += scnprintf(len+buf, PAGE_SIZE - len, "\n");
 	return len;
 }
 EXPORT_SYMBOL_GPL(led_trigger_show);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ]

Now br_sysfs_if file flush doesn't have attr show. To read it will cause kernel panic after users chmod u+r this file.

Xiong found this issue when running the commands:

ip link add br0 type bridge
ip link add type veth
ip link set veth0 master br0
chmod u+r /sys/devices/virtual/net/veth0/brport/flush timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush

kernel crashed with NULL a pointer dereference call trace.

This patch is to fix it by return -EINVAL when brport_attr->show is null, just the same as the check for brport_attr->store in brport_store().

---
 net/bridge/br_sysfs_if.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -225,6 +225,9 @@ static ssize_t brport_show(struct kobjec
 	struct brport_attribute *brport_attr = to_brport_attr(attr);
 	struct net_bridge_port *p = to_brport(kobj);
 
+	if (!brport_attr->show)
+		return -EINVAL;
+
 	return brport_attr->show(p, buf);
 }
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Denis Du <[email protected]>

[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ]

Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking.

---
 drivers/net/wan/hdlc_ppp.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

@@ -574,7 +574,10 @@ static void ppp_timer(unsigned long arg)
 			ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
 				     0, NULL);
 			proto->restart_counter--;
-		} else
+		} else if (netif_carrier_ok(proto->dev))
+			ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
+				     0, NULL);
+		else
 			ppp_cp_event(proto->dev, proto->pid, TO_BAD, 0, 0,
 				     0, NULL);
 		break;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ]

gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct:

net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.

We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns.

This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc.

---
 net/ipv6/sit.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -176,7 +176,7 @@ static void ipip6_tunnel_clone_6rd(struc
 #ifdef CONFIG_IPV6_SIT_6RD
 	struct ip_tunnel *t = netdev_priv(dev);
 
-	if (t->dev == sitn->fb_tunnel_dev) {
+	if (dev == sitn->fb_tunnel_dev) {
 		ipv6_addr_set(&t->ip6rd.prefix, htonl(0x20020000), 0, 0, 0);
 		t->ip6rd.relay_prefix = 0;
 		t->ip6rd.prefixlen = 16;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jakub Kicinski <[email protected]>

[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ]

netif_set_real_num_tx_queues() can be called when netdev is up. That usually happens when user requests change of number of channels/rings with ethtool -L. The procedure for changing the number of queues involves resetting the qdiscs and setting dev->num_tx_queues to the new value. When the new value is lower than the old one, extra care has to be taken to ensure ordering of accesses to the number of queues vs qdisc reset.

Currently the queues are reset before new dev->num_tx_queues is assigned, leaving a window of time where packets can be enqueued onto the queues going down, leading to a likely crash in the drivers, since most drivers don't check if TX skbs are assigned to an active queue.

---
 net/core/dev.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

@@ -2070,8 +2070,11 @@ EXPORT_SYMBOL(netif_set_xps_queue);
  */
 int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
 {
+	bool disabling;
 	int rc;
 
+	disabling = txq < dev->real_num_tx_queues;
+
 	if (txq < 1 || txq > dev->num_tx_queues)
 		return -EINVAL;
 

@@ -2087,15 +2090,19 @@ int netif_set_real_num_tx_queues(struct
 		if (dev->num_tc)
 			netif_setup_tc(dev, txq);
 
-		if (txq < dev->real_num_tx_queues) {
+		dev->real_num_tx_queues = txq;
+
+		if (disabling) {
+			synchronize_net();
 			qdisc_reset_all_tx_gt(dev, txq);
 #ifdef CONFIG_XPS
 			netif_reset_xps_queues_gt(dev, txq);
 #endif
 		}
+	} else {
+		dev->real_num_tx_queues = txq;
 	}
 
-	dev->real_num_tx_queues = txq;
 	return 0;
 }
 EXPORT_SYMBOL(netif_set_real_num_tx_queues);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Dichtel <[email protected]>

[ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ]

Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the case when commit 134e63756d5f was pushed.
However, there was no reason to stop the loop if a netns does not have listeners.
Returns -ESRCH only if there was no listeners in all netns.

To avoid having the same problem in the future, I didn't take the assumption that nlmsg_multicast() returns only 0 or -ESRCH.

---
 net/netlink/genetlink.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

@@ -1058,6 +1058,7 @@ static int genlmsg_mcast(struct sk_buff
 {
 	struct sk_buff *tmp;
 	struct net *net, *prev = NULL;
+	bool delivered = false;
 	int err;
 
 	for_each_net_rcu(net) {

@@ -1069,14 +1070,21 @@ static int genlmsg_mcast(struct sk_buff
 			}
 			err = nlmsg_multicast(prev->genl_sock, tmp,
 					      portid, group, flags);
-			if (err)
+			if (!err)
+				delivered = true;
+			else if (err != -ESRCH)
 				goto error;
 		}
 
 		prev = net;
 	}
 
-	return nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
+	err = nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
+	if (!err)
+		delivered = true;
+	else if (err != -ESRCH)
+		goto error;
+	return delivered ? 0 : -ESRCH;
  error:
 	kfree_skb(skb);
 	return err;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Guillaume Nault <[email protected]>

[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ]

PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed.
In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel.

However, it is possible for an unregistered channel to connect to a PPP
unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT).

Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list.

Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism.

This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated).

---
 drivers/net/ppp/ppp_generic.c |    9 +++++++++
 1 file changed, 9 insertions(+)

@@ -2908,6 +2908,15 @@ ppp_connect_channel(struct channel *pch,
 		goto outl;
 
 	ppp_lock(ppp);
+	spin_lock_bh(&pch->downl);
+	if (!pch->chan) {
+		/* Don't connect unregistered channels */
+		spin_unlock_bh(&pch->downl);
+		ppp_unlock(ppp);
+		ret = -ENOTCONN;
+		goto outl;
+	}
+	spin_unlock_bh(&pch->downl);
 	if (pch->file.hdrlen > ppp->file.hdrlen)
 		ppp->file.hdrlen = pch->file.hdrlen;
 	hdrlen = pch->file.hdrlen + 2;	/* for protocol bytes */

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Kodanev <[email protected]>

[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ]

Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it:

udp4_csum_init() or udp6_csum_init()
skb_checksum_init_zero_check()
__skb_checksum_validate_complete()

The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped.

It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return.

---
 include/net/udplite.h   |    1 +
 net/ipv4/udp.c          |    5 +++++
 net/ipv6/ip6_checksum.c |    5 +++++
 3 files changed, 11 insertions(+)

@@ -61,6 +61,7 @@ static inline int udplite_checksum_init(
 		UDP_SKB_CB(skb)->cscov = cscov;
 		if (skb->ip_summed == CHECKSUM_COMPLETE)
 			skb->ip_summed = CHECKSUM_NONE;
+		skb->csum_valid = 0;
         }
 
 	return 0;

@@ -1718,6 +1718,11 @@ static inline int udp4_csum_init(struct
 		err = udplite_checksum_init(skb, uh);
 		if (err)
 			return err;
+
+		if (UDP_SKB_CB(skb)->partial_cov) {
+			skb->csum = inet_compute_pseudo(skb, proto);
+			return 0;
+		}
 	}
 
 	return skb_checksum_init_zero_check(skb, proto, uh->check,

@@ -73,6 +73,11 @@ int udp6_csum_init(struct sk_buff *skb,
 		err = udplite_checksum_init(skb, uh);
 		if (err)
 			return err;
+
+		if (UDP_SKB_CB(skb)->partial_cov) {
+			skb->csum = ip6_compute_pseudo(skb, proto);
+			return 0;
+		}
 	}
 
 	/* To support RFC 6936 (allow zero checksum in UDP/IPV6 for tunnels)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Kodanev <[email protected]>

[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ]

When going through the bind address list in sctp_v6_get_dst() and the previously found address is better ('matchlen > bmatchlen'), the code continues to the next iteration without releasing currently held destination.

Fix it by releasing 'bdst' before continue to the next iteration, and instead of introducing one more '!IS_ERR(bdst)' check for dst_release(), move the already existed one right after ip6_dst_lookup_flow(), i.e. we shouldn't proceed further if we get an error for the route lookup.

---
 net/sctp/ipv6.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

@@ -323,8 +323,10 @@ static void sctp_v6_get_dst(struct sctp_
 		final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
 		bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
 
-		if (!IS_ERR(bdst) &&
-		    ipv6_chk_addr(dev_net(bdst->dev),
+		if (IS_ERR(bdst))
+			continue;
+
+		if (ipv6_chk_addr(dev_net(bdst->dev),
 				  &laddr->a.v6.sin6_addr, bdst->dev, 1)) {
 			if (!IS_ERR_OR_NULL(dst))
 				dst_release(dst);

@@ -333,8 +335,10 @@ static void sctp_v6_get_dst(struct sctp_
 		}
 
 		bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
-		if (matchlen > bmatchlen)
+		if (matchlen > bmatchlen) {
+			dst_release(bdst);
 			continue;
+		}
 
 		if (!IS_ERR_OR_NULL(dst))
 			dst_release(dst);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <[email protected]>

[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ]

send_control_data() applies some special handling to SETIP v4 IPA commands. But current code parses *all* command types for the SETIP command code. Limit the command code check to IPA commands.

---
 drivers/s390/net/qeth_core.h      |    5 +++++
 drivers/s390/net/qeth_core_main.c |   14 ++++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)

@@ -593,6 +593,11 @@ struct qeth_cmd_buffer {
 	void (*callback) (struct qeth_channel *, struct qeth_cmd_buffer *);
 };
 
+static inline struct qeth_ipa_cmd *__ipa_cmd(struct qeth_cmd_buffer *iob)
+{
+	return (struct qeth_ipa_cmd *)(iob->data + IPA_PDU_HEADER_SIZE);
+}
+
 /**
  * definition of a qeth channel, used for read and write
  */

@@ -2023,7 +2023,7 @@ int qeth_send_control_data(struct qeth_c
 	unsigned long flags;
 	struct qeth_reply *reply = NULL;
 	unsigned long timeout, event_timeout;
-	struct qeth_ipa_cmd *cmd;
+	struct qeth_ipa_cmd *cmd = NULL;
 
 	QETH_CARD_TEXT(card, 2, "sendctl");
 

@@ -2050,10 +2050,13 @@ int qeth_send_control_data(struct qeth_c
 	while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
 	qeth_prepare_control_data(card, len, iob);
 
-	if (IS_IPA(iob->data))
+	if (IS_IPA(iob->data)) {
+		cmd = __ipa_cmd(iob);
 		event_timeout = QETH_IPA_TIMEOUT;
-	else
+	} else {
 		event_timeout = QETH_TIMEOUT;
+	}
+
 	timeout = jiffies + event_timeout;
 
 	QETH_CARD_TEXT(card, 6, "noirqpnd");

@@ -2078,9 +2081,8 @@ int qeth_send_control_data(struct qeth_c
 
 	/* we have only one long running ipassist, since we can ensure
 	   process context of this command we can sleep */
-	cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
-	if ((cmd->hdr.command == IPA_CMD_SETIP) &&
-	    (cmd->hdr.prot_version == QETH_PROT_IPV4)) {
+	if (cmd && cmd->hdr.command == IPA_CMD_SETIP &&
+	    cmd->hdr.prot_version == QETH_PROT_IPV4) {
 		if (!wait_event_timeout(reply->wait_q,
 		    atomic_read(&reply->received), event_timeout))
 			goto time_err;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <[email protected]>

[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ]

If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply.
This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way.

So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd().

Fix this by making sure that the same seqno value is assigned to a command and its reply object.
Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos.

As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno.

---
 drivers/s390/net/qeth_core_main.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

@@ -2037,25 +2037,26 @@ int qeth_send_control_data(struct qeth_c
 	}
 	reply->callback = reply_cb;
 	reply->param = reply_param;
-	if (card->state == CARD_STATE_DOWN)
-		reply->seqno = QETH_IDX_COMMAND_SEQNO;
-	else
-		reply->seqno = card->seqno.ipa++;
+
 	init_waitqueue_head(&reply->wait_q);
-	spin_lock_irqsave(&card->lock, flags);
-	list_add_tail(&reply->list, &card->cmd_waiter_list);
-	spin_unlock_irqrestore(&card->lock, flags);
 	QETH_DBF_HEX(CTRL, 2, iob->data, QETH_DBF_CTRL_LEN);
 
 	while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
-	qeth_prepare_control_data(card, len, iob);
 
 	if (IS_IPA(iob->data)) {
 		cmd = __ipa_cmd(iob);
+		cmd->hdr.seqno = card->seqno.ipa++;
+		reply->seqno = cmd->hdr.seqno;
 		event_timeout = QETH_IPA_TIMEOUT;
 	} else {
+		reply->seqno = QETH_IDX_COMMAND_SEQNO;
 		event_timeout = QETH_TIMEOUT;
 	}
+	qeth_prepare_control_data(card, len, iob);
+
+	spin_lock_irqsave(&card->lock, flags);
+	list_add_tail(&reply->list, &card->cmd_waiter_list);
+	spin_unlock_irqrestore(&card->lock, flags);
 
 	timeout = jiffies + event_timeout;
 

@@ -2889,7 +2890,7 @@ static void qeth_fill_ipacmd_header(stru
 	memset(cmd, 0, sizeof(struct qeth_ipa_cmd));
 	cmd->hdr.command = command;
 	cmd->hdr.initiator = IPA_CMD_INITIATOR_HOST;
-	cmd->hdr.seqno = card->seqno.ipa;
+	/* cmd->hdr.seqno is set by qeth_send_control_data() */
 	cmd->hdr.adapter_type = qeth_get_ipa_adp_type(card->info.link_type);
 	cmd->hdr.rel_adapter_no = (__u8) card->info.portno;
 	if (card->options.layer2)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Kodanev <[email protected]>

[ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ]

When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK:

[  597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
               put:120156 head:000000007aa47635 data:00000000d991c2de
               tail:0x1d640 end:0xfec0 dev:<NULL>
...
[  597.976970] ------------[ cut here ]------------
[  598.033408] kernel BUG at net/core/skbuff.c:104!
[  600.314841] Call Trace:
[  600.345829]  <IRQ>
[  600.371639]  ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.436934]  skb_put+0x16c/0x200
[  600.477295]  sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.540630]  ? sctp_packet_config+0x890/0x890 [sctp]
[  600.601781]  ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
[  600.671356]  ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
[  600.731482]  sctp_outq_flush+0x663/0x30d0 [sctp]
[  600.788565]  ? sctp_make_init+0xbf0/0xbf0 [sctp]
[  600.845555]  ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
[  600.912945]  ? sctp_outq_tail+0x631/0x9d0 [sctp]
[  600.969936]  sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
[  601.041593]  ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
[  601.104837]  ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
[  601.175436]  ? sctp_eat_data+0x1710/0x1710 [sctp]
[  601.233575]  sctp_do_sm+0x182/0x560 [sctp]
[  601.284328]  ? sctp_has_association+0x70/0x70 [sctp]
[  601.345586]  ? sctp_rcv+0xef4/0x32f0 [sctp]
[  601.397478]  ? sctp6_rcv+0xa/0x20 [sctp]

...

Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters.

Later this chunk causes the panic in skb_put_data():

  skb_packet_transmit()
      sctp_packet_pack()
          skb_put_data(nskb, chunk->skb->data, chunk->skb->len);

'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'.

As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.

---
 net/sctp/sm_make_chunk.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -1367,10 +1367,14 @@ static struct sctp_chunk *_sctp_make_chu
 	sctp_chunkhdr_t *chunk_hdr;
 	struct sk_buff *skb;
 	struct sock *sk;
+	int chunklen;
+
+	chunklen = sizeof(*chunk_hdr) + paylen;
+	if (chunklen > SCTP_MAX_CHUNK_LEN)
+		goto nodata;
 
 	/* No need to allocate LL here, as this is only a chunk. */
-	skb = alloc_skb(WORD_ROUND(sizeof(sctp_chunkhdr_t) + paylen),
-			GFP_ATOMIC);
+	skb = alloc_skb(chunklen, GFP_ATOMIC);
 	if (!skb)
 		goto nodata;
 

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <[email protected]>

[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ]

According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected:

A host MUST never reduce its estimate of the Path MTU below 68 octets.

and (talking about ICMP frag-needed's Next-Hop MTU field):

This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation".

Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32.

Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints.

---
 net/ipv4/route.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

@@ -122,9 +122,11 @@ static int ip_rt_redirect_silence __read
 static int ip_rt_error_cost __read_mostly	= HZ;
 static int ip_rt_error_burst __read_mostly	= 5 * HZ;
 static int ip_rt_mtu_expires __read_mostly	= 10 * 60 * HZ;
-static int ip_rt_min_pmtu __read_mostly		= 512 + 20 + 20;
+static u32 ip_rt_min_pmtu __read_mostly		= 512 + 20 + 20;
 static int ip_rt_min_advmss __read_mostly	= 256;
 
+static int ip_min_valid_pmtu __read_mostly	= IPV4_MIN_MTU;
+
 /*
  *	Interface to generic destination cache.
  */

@@ -2629,7 +2631,8 @@ static struct ctl_table ipv4_route_table
 		.data		= &ip_rt_min_pmtu,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &ip_min_valid_pmtu,
 	},
 	{
 		.procname	= "min_adv_mss",

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefano Brivio <[email protected]>

[ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ]

In fib_nh_match(), if output interface or gateway are passed in the FIB configuration, we don't have to check next hops of multipath routes to conclude whether we have a match or not.

However, we might still have routes with different realms matching the same output interface and gateway configuration, and this needs to cause the match to fail. Otherwise the first route inserted in the FIB will match, regardless of the realms:

 # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2
 # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4
 # ip route list table 1234
 1.1.1.1 dev eth0 scope link realms 1/2
 1.1.1.1 dev eth0 scope link realms 3/4
 # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4
 # ip route list table 1234
 1.1.1.1 dev ens3 scope link realms 3/4

whereas route with realms 3/4 should have been deleted instead.

Explicitly check for fc_flow passed in the FIB configuration (this comes from RTA_FLOW extracted by rtm_to_fib_config()) and fail matching if it differs from nh_tclassid.

The handling of RTA_FLOW for multipath routes later in fib_nh_match() is still needed, as we can have multiple RTA_FLOW attributes that need to be matched against the tclassid of each next hop.

v2: Check that fc_flow is set before discarding the match, so
that the user can still select the first matching rule by not specifying any realm, as suggested by David Ahern.

---
 net/ipv4/fib_semantics.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -514,6 +514,11 @@ int fib_nh_match(struct fib_config *cfg,
 		return 1;
 
 	if (cfg->fc_oif || cfg->fc_gw) {
+#ifdef CONFIG_IP_ROUTE_CLASSID
+		if (cfg->fc_flow &&
+		    cfg->fc_flow != fi->fib_nh->nh_tclassid)
+			return 1;
+#endif
 		if ((!cfg->fc_oif || cfg->fc_oif == fi->fib_nh->nh_oif) &&
 		    (!cfg->fc_gw  || cfg->fc_gw == fi->fib_nh->nh_gw))
 			return 0;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <[email protected]>

commit feb7695fe9fb83084aa29de0094774f4c9d4c9fc upstream.

If only a subset of the devices associated with multiple regions support a given special operation (eg. DISCARD) then the dec_count() that is used to set error for the region must increment the io->count.

Otherwise, when the dec_count() is called it can cause the dm-io caller's bio to be completed multiple times. As was reported against the dm-mirror target that had mirror legs with a mix of discard capabilities.

---
 drivers/md/dm-io.c |    1 +
 1 file changed, 1 insertion(+)

@@ -299,6 +299,7 @@ static void do_region(int rw, unsigned r
 	else if (rw & REQ_WRITE_SAME)
 		special_cmd_max_sectors = q->limits.max_write_same_sectors;
 	if ((rw & (REQ_DISCARD | REQ_WRITE_SAME)) && special_cmd_max_sectors == 0) {
+		atomic_inc(&io->count);
 		dec_count(io, region, -EOPNOTSUPP);
 		return;
 	}

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Build results:

	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 119 pass: 119 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

No issues on the OnePlus 3T, clean merge into the CAF msm-3.18 tree.

Great, thanks for testing and letting me know.

greg k-h