arm64: dts: msm8992: add pstore-ramoops support
PATCH 1/1 arm64: dts: msm8992: add pstore-ramoops support
With the addition of this ramoops node it enables post mortem analysis if a debug cable is not attached and/or not available.
All addresses and values were extracted from CAF AOSP marshmallow DR 1.6.
Signed-off-by Jeremy McNicoll <[email protected]>
--- arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +15 -0
@@ -38,4 +38,19 @@ pinctrl-1 = <&blsp1_uart2_sleep>; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops at 1ff00000 { + compatible = "ramoops"; + reg = <0x0 0x1ff00000 0x0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + }; };
Signature · 1 line
2.6.1
PATCH 1/1 arm64: dts: msm8992: add pstore-ramoops support
Quoted 6 lines · Jeremy McNicoll
With the addition of this ramoops node it enables post mortem analysis if a debug cable is not attached and/or not available.
All addresses and values were extracted from CAF AOSP marshmallow DR 1.6.
Acked-by Bjorn Andersson <[email protected]>
Regards,
Bjorn