arm64: dts: Add sdm845 GPU/GMU and SMMU
Subsystems (6)
v2 cover arm64: dts: Add sdm845 GPU/GMU and SMMU
(resend because I forgot to CC everybody on the patches)
Add DT nodes for the sdm845 GPU/GMU (graphics management unit) and the companion arm-smmu-v2 compatible SMMU.
This builds on the following dependencies -
https://patchwork.kernel.org/patch/10286369/ - bindings for qcom,level
https://patchwork.kernel.org/patch/10281599/ - qcom,smmu-v2 bindings
Please refer to https://patchwork.freedesktop.org/series/37428/ for the driver code.
[v2 - changed qcom,arc-level to qcom,level following discussion with Viresh; change gmu phandle to qcom,gmu per Rob]
Jordan Crouse (2):
dt-bindings: Document qcom,adreno-gmu
arm64: dts: sdm845: Add gpu and gmu device nodes
.../devicetree/bindings/display/msm/gmu.txt | 54 ++++++++++ .../devicetree/bindings/display/msm/gpu.txt | 10 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 119 +++++++++++++++++++++ 3 files changed, 181 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/gmu.txt
Signature · 6 lines
2.16.1 _______________________________________________ Freedreno mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/freedreno
A message that is not in the archive (sent off-list or not yet received): 20180316185152.32020-1-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
PATCH v2 1/2 dt-bindings: Document qcom,adreno-gmu
Document the device tree bindings for the Adreno GMU device available on Adreno a6xx targets.
--- .../devicetree/bindings/display/msm/gmu.txt | 54 ++++++++++++++++++++++ .../devicetree/bindings/display/msm/gpu.txt | 10 +++- 2 files changed, 62 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/gmu.txt
Documentation/devicetree/bindings/display/msm/gmu.txt new file +54 -0
@@ -0,0 +1,54 @@ +Qualcomm adreno/snapdragon GMU (Graphics management unit) + +The GMU is a programmable power controller for the GPU. the CPU controls the +GMU which in turn handles power controls for the GPU. + +Required properties: +- compatible: + * "qcom,adreno-gmu" +- reg: Physical base address and length of the GMU registers. +- reg-names: Matching names for the register regions + * "gmu" + * "gmu_pdc" +- interrupts: The interrupt signals from the GMU. +- interrupt-names: Matching names for the interrupts + * "hfi" + * "gmu" +- clocks: phandles to the device clocks +- clock-names: Matching names for the clocks + * "gmu" + * "cxo" + * "axi" + * "mnoc" +- power-domains: should be <&clock_gpucc GPU_CX_GDSC> +- iommus: phandle to the adreno iommu +- operating-points-v2: phandle to the OPP operating points + +Example: + +/ { + ... + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb200000 0x300000>; + reg-names = "gmu", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>, + <&clock_gpucc GPU_CC_CXO_CLK>, + <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>, + <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&clock_gpucc GPU_CX_GDSC>; + iommus = <&adreno_smmu 5>; + + i operating-points-v2 = <&gmu_opp_table>; + }; +};
Documentation/devicetree/bindings/display/msm/gpu.txt +8 -2
@@ -8,12 +8,18 @@ Required properties: with the chip-id. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. -- clocks: device clocks + +Optional properties. +- clocks: device clocks. Required for a3xx, a4xx and a5xx targets. a6xx and + newer with a GMU attached do not have direct clock control from the CPU and + do not need to provide clock properties. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required: +- clock-names: the following clocks can be provided: * "core" * "iface" * "mem_iface" +- qcom,gmu: For a6xx and newer targets a phandle to the GMU device that will + control the power for the GPU Example:
Signature · 6 lines
2.16.1 _______________________________________________ Freedreno mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/freedreno
A message that is not in the archive (sent off-list or not yet received): 20180316185152.32020-2-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Rob Herring
Reviewed-byRe: [PATCH 1/2] dt-bindings: Document qcom,adreno-gmu
Quoted 9 lines · Jordan Crouse
Document the device tree bindings for the Adreno GMU device available on Adreno a6xx targets.
Signed-off-by Jordan Crouse <[email protected]>--- .../devicetree/bindings/display/msm/gmu.txt | 54 ++++++++++++++++++++++ .../devicetree/bindings/display/msm/gpu.txt | 10 +++- 2 files changed, 62 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/gmu.txt
_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
Viresh Kumar
Acked-byQuoted 12 lines · Jordan Crouse
(resend because I forgot to CC everybody on the patches)
Add DT nodes for the sdm845 GPU/GMU (graphics management unit) and the companion arm-smmu-v2 compatible SMMU.
This builds on the following dependencies -
https://patchwork.kernel.org/patch/10286369/ - bindings for qcom,level
https://patchwork.kernel.org/patch/10281599/ - qcom,smmu-v2 bindingsPlease refer to https://patchwork.freedesktop.org/series/37428/ for the driver code.
Quoted 6 lines
[v2 - changed qcom,arc-level to qcom,level following discussion with Viresh; change gmu phandle to qcom,gmu per Rob]
Jordan Crouse (2):
dt-bindings: Document qcom,adreno-gmu
arm64: dts: sdm845: Add gpu and gmu device nodes
Signature · 5 lines
viresh _______________________________________________ Freedreno mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/freedreno
PATCH 2/2 arm64: dts: sdm845: Add gpu and gmu device nodes
In reply to Jordan CrouseAdd the nodes to describe the Adreno GPU and GMU devices.
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 119 +++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+)
arch/arm64/boot/dts/qcom/sdm845.dtsi +119 -0
@@ -312,4 +312,123 @@ }; }; }; + + adreno_smmu: arm,smmu-adreno@5040000 { + compatible = "qcom,msm8996-smmu-v2"; + reg = <0x5040000 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&clock_gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&clock_gpucc GPU_CX_GDSC>; + }; + + gpu_opp_table: adreno-opp-table { + compatible = "operating-points-v2"; + + opp-710000000 { + opp-hz = /bits/ 64 <710000000>; + qcom,level = <416>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + qcom,level = <384>; + }; + + opp-596000000 { + opp-hz = /bits/ 64 <596000000>; + qcom,level = <320>; + }; + + opp-520000000 { + opp-hz = /bits/ 64 <520000000>; + qcom,level = <256>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + qcom,level = <192>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + qcom,level = <128>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + qcom,level = <64>; + }; + }; + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0x5000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + /* + * Look ma, no clocks! The GPU clocks and power are controlled + * entirely by the GMU + */ + + interrupts = <0 300 0>; + interrupt-names = "kgsl_3d0_irq"; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + gmu = <&gmu>; + }; + + gmu_opp_table: adreno-gmu-opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + qcom,level = <128>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + qcom,level = <48>; + }; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, <0xb200000 0x300000>; + reg-names = "gmu", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>, + <&clock_gpucc GPU_CC_CXO_CLK>, + <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>, + <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&clock_gpucc GPU_CX_GDSC>; + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + }; };
Signature · 6 lines
2.16.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel