Skip to contentSkip to conversation

h8300: switch to NO_BOOTMEM

PATCH In review Rob Herring 2 participants 4 messages Mar 16, 2018 – May 9, 2018

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 h8300: switch to NO_BOOTMEM

Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc") inadvertently switched the DT unflattening allocations from memblock to bootmem which doesn't work because the unflattening happens before bootmem is initialized. Swapping the order of bootmem init and unflattening could also fix this, but removing bootmem is desired. So enable NO_BOOTMEM on h8300 like other architectures have done.

Fixes 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
Cc Yoshinori Sato <[email protected]>

---
I haven't seen any reports, but 4.16 is likely broken. This is compile tested only.

Moving unflattening after bootmem_init should also work if a smaller change for 4.16 is desired.

Rob

 arch/h8300/Kconfig        |  1 +
 arch/h8300/kernel/setup.c | 36 ++++++++----------------------------
 2 files changed, 9 insertions(+), 28 deletions(-)
arch/h8300/Kconfig +1 -0
index 091d6d04b5e5..efc602634064 100644
@@ -16,6 +16,7 @@ config H8300
 	select OF_IRQ
 	select OF_EARLY_FLATTREE
 	select HAVE_MEMBLOCK
+	select NO_BOOTMEM
 	select TIMER_OF
 	select H8300_TMR8
 	select HAVE_KERNEL_GZIP
arch/h8300/kernel/setup.c +8 -28
index a4d0470c10a9..33ed980e7aea 100644
@@ -71,10 +71,6 @@ void __init h8300_fdt_init(void *fdt, char *bootargs)
 
 static void __init bootmem_init(void)
 {
-	int bootmap_size;
-	unsigned long ram_start_pfn;
-	unsigned long free_ram_start_pfn;
-	unsigned long ram_end_pfn;
 	struct memblock_region *region;
 
 	memory_end = memory_start = 0;
@@ -88,33 +84,17 @@ static void __init bootmem_init(void)
 	if (!memory_end)
 		panic("No memory!");
 
-	ram_start_pfn = PFN_UP(memory_start);
-	/* free_ram_start_pfn is first page after kernel */
-	free_ram_start_pfn = PFN_UP(__pa(_end));
-	ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	/* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
+	min_low_pfn = PFN_UP(memory_start);
+	max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_pfn = max_low_pfn;
 
-	max_pfn = ram_end_pfn;
+	memblock_reserve(__pa(_stext), _end - _stext);
 
-	/*
-	 * give all the memory to the bootmap allocator,  tell it to put the
-	 * boot mem_map at the start of memory
-	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0),
-					 free_ram_start_pfn,
-					 0,
-					 ram_end_pfn);
-	/*
-	 * free the usable memory,  we have to make sure we do not free
-	 * the bootmem bitmap so we then reserve it after freeing it :-)
-	 */
-	free_bootmem(PFN_PHYS(free_ram_start_pfn),
-		     (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
-	reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
-			BOOTMEM_DEFAULT);
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
 
-	for_each_memblock(reserved, region) {
-		reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
-	}
+	memblock_dump_all();
 }
 
 void __init setup_arch(char **cmdline_p)
Signature · 1 line
2.14.1
#1 lore raw
Quoted 11 lines · Rob Herring

Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc") inadvertently switched the DT unflattening allocations from memblock to bootmem which doesn't work because the unflattening happens before bootmem is initialized. Swapping the order of bootmem init and unflattening could also fix this, but removing bootmem is desired. So enable NO_BOOTMEM on h8300 like other architectures have done.

Fixes 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
Cc Yoshinori Sato <[email protected]>
Quoted 6 lines

---
I haven't seen any reports, but 4.16 is likely broken. This is compile tested only.

Moving unflattening after bootmem_init should also work if a smaller change for 4.16 is desired.

Ping! Someone going to pick this up?

Rob

#2 lore raw
Quoted 17 lines · Rob Herring
Quoted 15 lines · Rob Herring

Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc") inadvertently switched the DT unflattening allocations from memblock to bootmem which doesn't work because the unflattening happens before bootmem is initialized. Swapping the order of bootmem init and unflattening could also fix this, but removing bootmem is desired. So enable NO_BOOTMEM on h8300 like other architectures have done.

Fixes 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
Cc Yoshinori Sato <[email protected]>

---
I haven't seen any reports, but 4.16 is likely broken. This is compile tested only.

Quoted 6 lines
Quoted 2 lines

Moving unflattening after bootmem_init should also work if a smaller change for 4.16 is desired.

Ping! Someone going to pick this up?

Rob

Sorry. I looked out.
Please wait several days to confirm.

Signature · 1 line
Yosinori Sato
#3 lore raw
In reply to Rob Herring
Quoted 12 lines · Rob Herring

Commit 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc") inadvertently switched the DT unflattening allocations from memblock to bootmem which doesn't work because the unflattening happens before bootmem is initialized. Swapping the order of bootmem init and unflattening could also fix this, but removing bootmem is desired. So enable NO_BOOTMEM on h8300 like other architectures have done.

Fixes 0fa1c579349f ("of/fdt: use memblock_virt_alloc for early alloc")
Cc Yoshinori Sato <[email protected]>
Quoted 6 lines

---
I haven't seen any reports, but 4.16 is likely broken. This is compile tested only.

Moving unflattening after bootmem_init should also work if a smaller change for 4.16 is desired.

It's works fine.
Applied to h8300-next.

Thanks.

Quoted 78 lines

Rob

 arch/h8300/Kconfig        |  1 +
 arch/h8300/kernel/setup.c | 36 ++++++++----------------------------
 2 files changed, 9 insertions(+), 28 deletions(-)
arch/h8300/Kconfig +1 -0
index 091d6d04b5e5..efc602634064 100644
@@ -16,6 +16,7 @@ config H8300
 	select OF_IRQ
 	select OF_EARLY_FLATTREE
 	select HAVE_MEMBLOCK
+	select NO_BOOTMEM
 	select TIMER_OF
 	select H8300_TMR8
 	select HAVE_KERNEL_GZIP
arch/h8300/kernel/setup.c +8 -28
index a4d0470c10a9..33ed980e7aea 100644
@@ -71,10 +71,6 @@ void __init h8300_fdt_init(void *fdt, char *bootargs)
 
 static void __init bootmem_init(void)
 {
-	int bootmap_size;
-	unsigned long ram_start_pfn;
-	unsigned long free_ram_start_pfn;
-	unsigned long ram_end_pfn;
 	struct memblock_region *region;
 
 	memory_end = memory_start = 0;
@@ -88,33 +84,17 @@ static void __init bootmem_init(void)
 	if (!memory_end)
 		panic("No memory!");
 
-	ram_start_pfn = PFN_UP(memory_start);
-	/* free_ram_start_pfn is first page after kernel */
-	free_ram_start_pfn = PFN_UP(__pa(_end));
-	ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	/* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
+	min_low_pfn = PFN_UP(memory_start);
+	max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_pfn = max_low_pfn;
 
-	max_pfn = ram_end_pfn;
+	memblock_reserve(__pa(_stext), _end - _stext);
 
-	/*
-	 * give all the memory to the bootmap allocator,  tell it to put the
-	 * boot mem_map at the start of memory
-	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0),
-					 free_ram_start_pfn,
-					 0,
-					 ram_end_pfn);
-	/*
-	 * free the usable memory,  we have to make sure we do not free
-	 * the bootmem bitmap so we then reserve it after freeing it :-)
-	 */
-	free_bootmem(PFN_PHYS(free_ram_start_pfn),
-		     (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
-	reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
-			BOOTMEM_DEFAULT);
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
 
-	for_each_memblock(reserved, region) {
-		reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
-	}
+	memblock_dump_all();
 }
 
 void __init setup_arch(char **cmdline_p)
Signature · 1 line
2.14.1
Signature · 2 lines
Yoshinori Sato
<[email protected]>