Skip to contentSkip to conversation

dt-bindings: Add vendor prefix for Bticino

PATCH In review Jagan Teki 3 participants 4 messages Mar 19, 2018 – Apr 16, 2018

Subsystems (3)
lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

PATCH v2 1/2 dt-bindings: Add vendor prefix for Bticino

Added 'bticino' vendor prefix for Bticino International.

---
Changes for v2:
- Collect review tag from Rob

 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
index ae850d6c0ad3..da0ead5b1ea3 100644
@@ -56,6 +56,7 @@ bosch	Bosch Sensortec GmbH
 boundary	Boundary Devices Inc.
 brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.
+bticino Bticino International
 calxeda	Calxeda
 capella	Capella Microsystems, Inc
 cascoda	Cascoda, Ltd.
Signature · 1 line
2.14.3
author
#1 lore raw

PATCH v2 2/2 ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support

This patch adds initial support for BTicino i.MX6DL Mamoj board.

---
Changes for v2:
- Squash 'PFUZE100 support' patch
- Remove fec PHY reset mux

 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/imx6dl-mamoj.dts | 224 +++++++++++++++++++++++++++++++++++++
 2 files changed, 225 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-mamoj.dts
arch/arm/boot/dts/Makefile +1 -0
index 26e2e290ec28..b5dcc55bd157 100644
@@ -397,6 +397,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-hummingboard2-som-v15.dtb \
 	imx6dl-icore.dtb \
 	imx6dl-icore-rqs.dtb \
+	imx6dl-mamoj.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-mira-rdk-nand.dtb \
arch/arm/boot/dts/imx6dl-mamoj.dts new file +224 -0

224 lines not on this page · raw message

Signature · 1 line
2.14.3
#3 lore raw

Re: [PATCH v2 2/2] ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support

In reply to Jagan Teki

arch/arm/boot/dts/imx6dl-mamoj.dts line 36

Quoted 7 lines · Jagan Teki

+&i2c4 {

arch/arm/boot/dts/imx6dl-mamoj.dts new file +6 -0
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pmic: pfuze100 at 8 {

pfuze100: pmic at 8

I fixed it up and applied both patches.

Shawn

Quoted 2 lines
arch/arm/boot/dts/imx6dl-mamoj.dts new file +2 -0
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;