Skip to contentSkip to conversation

qed: Use true and false for boolean values

PATCH Applied Gustavo A. R. Silva 3 participants 3 messages Mar 22, 2018 – Mar 23, 2018

Subsystems (3)
Networking Network drivers QLogic QL4xxx Ethernet driver
lore
Share & tools
lore

Gustavo A. R. Silva

author
#0 lore raw

PATCH 1/1 qed: Use true and false for boolean values

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by Gustavo A. R. Silva <[email protected]>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/qlogic/qed/qed_dev.c +5 -5
index 553a6d1..cdb3eec 100644
@@ -298,8 +298,8 @@ static void qed_init_qm_params(struct qed_hwfn *p_hwfn)
 	qm_info->start_vport = (u8) RESC_START(p_hwfn, QED_VPORT);
 
 	/* rate limiting and weighted fair queueing are always enabled */
-	qm_info->vport_rl_en = 1;
-	qm_info->vport_wfq_en = 1;
+	qm_info->vport_rl_en = true;
+	qm_info->vport_wfq_en = true;
 
 	/* TC config is different for AH 4 port */
 	four_port = p_hwfn->cdev->num_ports_in_engine == MAX_NUM_PORTS_K2;

@@ -1276,9 +1276,9 @@ static int qed_hw_init_common(struct qed_hwfn *p_hwfn,
 
 	if (p_hwfn->mcp_info) {
 		if (p_hwfn->mcp_info->func_info.bandwidth_max)
-			qm_info->pf_rl_en = 1;
+			qm_info->pf_rl_en = true;
 		if (p_hwfn->mcp_info->func_info.bandwidth_min)
-			qm_info->pf_wfq_en = 1;
+			qm_info->pf_wfq_en = true;
 	}
 
 	memset(&params, 0, sizeof(params));

@@ -1630,7 +1630,7 @@ static int qed_vf_start(struct qed_hwfn *p_hwfn,
 		qed_vf_pf_tunnel_param_update(p_hwfn, p_params->p_tunn);
 	}
 
-	p_hwfn->b_int_enabled = 1;
+	p_hwfn->b_int_enabled = true;
 
 	return 0;
 }
Signature · 1 line
2.7.4
Acked-by on v1 1/1
#1 lore raw

-----Original Message-----
From: Gustavo A. R. Silva [mailto:[email protected]]
Sent: 23 March 2018 01:39
To: Elior, Ariel <[email protected]>; Dept-Eng Everest Linux L2 <[email protected]>
Cc: [email protected]; [email protected]; Gustavo A. R. Silva <[email protected]>
Subject: [PATCH] qed: Use true and false for boolean values

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by Gustavo A. R. Silva <[email protected]>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/qlogic/qed/qed_dev.c +2 -2
index 553a6d1..cdb3eec 100644
@@ -298,8 +298,8 @@ static void qed_init_qm_params(struct qed_hwfn *p_hwfn)
 	qm_info->start_vport = (u8) RESC_START(p_hwfn, QED_VPORT);
 
 	/* rate limiting and weighted fair queueing are always enabled */
-	qm_info->vport_rl_en = 1;
-	qm_info->vport_wfq_en = 1;
+	qm_info->vport_rl_en = true;
+	qm_info->vport_wfq_en = true;
 
 	/* TC config is different for AH 4 port */
 	four_port = p_hwfn->cdev->num_ports_in_engine == MAX_NUM_PORTS_K2; @@ -1276,9 +1276,9 @@ static int qed_hw_init_common(struct qed_hwfn *p_hwfn,

if (p_hwfn->mcp_info) {
if (p_hwfn->mcp_info->func_info.bandwidth_max)
- qm_info->pf_rl_en = 1;
+ qm_info->pf_rl_en = true;
if (p_hwfn->mcp_info->func_info.bandwidth_min)
- qm_info->pf_wfq_en = 1;
+ qm_info->pf_wfq_en = true;
}

memset(&params, 0, sizeof(params));
@@ -1630,7 +1630,7 @@ static int qed_vf_start(struct qed_hwfn *p_hwfn,
qed_vf_pf_tunnel_param_update(p_hwfn, p_params->p_tunn);
}

- p_hwfn->b_int_enabled = 1;
+ p_hwfn->b_int_enabled = true;

return 0;
}
--
2.7.4

Acked-by Sudarsana Kalluru <[email protected]>