ath10k: Advertize beacon_int_min_gcd
PATCH 1/1 ath10k: Advertize beacon_int_min_gcd
This patch fixes regression caused by 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals"), with this change cfg80211 expects the driver to advertize 'beacon_int_min_gcd' to support different beacon intervals in multivap scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and 1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053
--- drivers/net/wireless/ath/ath10k/mac.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/wireless/ath/ath10k/mac.c +3 -0
@@ -1,6 +1,7 @@/* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. +* Copyright (c) 2018, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above
@@ -7874,6 +7875,7 @@ void ath10k_mac_destroy(struct ath10k *ar) .max_interfaces = 8, .num_different_channels = 1, .beacon_int_infra_match = true, + .beacon_int_min_gcd =1 , #ifdef CONFIG_ATH10K_DFS_CERTIFIED .radar_detect_widths =BIT (NL80211_CHAN_WIDTH_20_NOHT ) | BIT(NL80211_CHAN_WIDTH_20) |
@@ -7997,6 +7999,7 @@ void ath10k_mac_destroy(struct ath10k *ar) .max_interfaces = 16, .num_different_channels = 1, .beacon_int_infra_match = true, + .beacon_int_min_gcd =1 , #ifdef CONFIG_ATH10K_DFS_CERTIFIED .radar_detect_widths =BIT (NL80211_CHAN_WIDTH_20_NOHT ) | BIT(NL80211_CHAN_WIDTH_20) |
Signature · 1 line
1.7.9.5
Quoted 6 lines · [email protected] wrote:
This patch fixes regression caused by
0c317a02ca98("cfg80211: support virtual interfaces with different beacon intervals"), with this change cfg80211 expects the driver to advertize 'beacon_int_min_gcd' to support different beacon intervals in multivap scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
Quoted 7 lines
Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and 1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053Fixes 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")Signed-off-by Anilkumar Kolli <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
8ebee73b574a ath10k: advertize beacon_int_min_gcd
Signature · 3 lines
https://patchwork.kernel.org/patch/10263995/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 6 lines · [email protected] wrote:
This patch fixes regression caused by
0c317a02ca98("cfg80211: support virtual interfaces with different beacon intervals"), with this change cfg80211 expects the driver to advertize 'beacon_int_min_gcd' to support different beacon intervals in multivap scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.
Quoted 7 lines
Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and 1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053Fixes 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")Signed-off-by Anilkumar Kolli <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
8ebee73b574a ath10k: advertize beacon_int_min_gcd
Signature · 9 lines
https://patchwork.kernel.org/patch/10263995/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k