bpf: introduce cgroup-bpf bind, connect, post-bind hooks
Subsystems (15)
Alexei Starovoitov
maintainerv3 cover bpf: introduce cgroup-bpf bind, connect, post-bind hooks
v2->v3:
- rebase due to conflicts
- fix ipv6=m build
v1->v2:
- support expected_attach_type at prog load time so that prog (incl. context accesses and calls to helpers) can be validated with regard to specific attach point it is supposed to be attached to. Later, at attach time, attach type is checked so that it must be same as at load time if it was provided
- reworked hooks to rely on expected_attach_type, and reduced number of new prog types from 6 to just 1: BPF_PROG_TYPE_CGROUP_SOCK_ADDR
- reused BPF_PROG_TYPE_CGROUP_SOCK for sys_bind post-hooks
- add selftests for post-sys_bind hook
For our container management we've been using complicated and fragile setup consisting of LD_PRELOAD wrapper intercepting bind and connect calls from all containerized applications. Unfortunately it doesn't work for apps that don't use glibc and changing all applications that run in the datacenter is not possible due to 3rd party code and libraries (despite being open source code) and sheer amount of legacy code that has to be rewritten (we're rewriting what we can in parallel)
These applications are written without containers in mind and have builtin assumptions about network services. Like an application X expects to connect localhost:special_port and find service Y in there. To move application X and service Y into two different containers LD_PRELOAD approach is used to help one service connect to another without rewriting them.
Moving these two applications into different L2 (netns) or L3 (vrf) network isolation scopes doesn't help to solve the problem, since applications need to see each other like they were running on the host without containers.
So if app X and app Y would run in different netns something would need to punch a connectivity hole in those namespaces. That would be real layering violation (with corresponding network debugging pains), since clean l2, l3 abstraction would suddenly support something that breaks through the layers.
Instead we used LD_PRELOAD (and now bpf programs) at bind/connect time to help applications discover and connect to each other. All applications are running in init_nens and there are no vrfs. After bind/connect the normal fib/neighbor core networking logic works as it should always do and the whole system is clean from network point of view and can be debugged with standard tools.
We also considered resurrecting Hannes's afnetns work,
but all hierarchical namespace abstraction don't work due
to these builtin networking assumptions inside the apps.
To run an application inside cgroup container that was not written with containers in mind we have to make an illusion of running in non-containerized environment.
In some cases we remember the port and container id in the post-bind hook in a bpf map and when some other task in a different container is trying to connect to a service we need to know where this service is running. It can be remote and can be local. Both client and service may or may not be written with containers in mind and this sockaddr rewrite is providing connectivity and load balancing feature.
BPF+cgroup looks to be the best solution for this problem. Hence we introduce 3 hooks:
- at entry into sys_bind and sys_connect
to let bpf prog look and modify 'struct sockaddr' provided by user space and fail bind/connect when appropriate
- post sys_bind after port is allocated
The approach works great and has zero overhead for anyone who doesn't use it and very low overhead when deployed.
Different use case for this feature is to do low overhead firewall that doesn't need to inspect all packets and works at bind/connect time.
Andrey Ignatov (9):
bpf: Check attach type at prog load time
libbpf: Support expected_attach_type at prog load
bpf: Hooks for sys_bind
selftests/bpf: Selftest for sys_bind hooks
net: Introduce __inet_bind() and __inet6_bind
bpf: Hooks for sys_connect
selftests/bpf: Selftest for sys_connect hooks
bpf: Post-hooks for sys_bind selftests/bpf: Selftest for sys_bind post-hooks.
include/linux/bpf-cgroup.h | 68 ++- include/linux/bpf.h | 5 +- include/linux/bpf_types.h | 1 + include/linux/filter.h | 11 + include/net/addrconf.h | 7 + include/net/inet_common.h | 2 + include/net/ipv6.h | 2 + include/net/sock.h | 3 + include/net/udp.h | 1 + include/uapi/linux/bpf.h | 51 ++- kernel/bpf/cgroup.c | 39 +- kernel/bpf/syscall.c | 102 ++++- kernel/bpf/verifier.c | 7 +- kernel/trace/bpf_trace.c | 27 +- net/core/filter.c | 442 +++++++++++++++++-- net/ipv4/af_inet.c | 71 +++- net/ipv4/tcp_ipv4.c | 16 + net/ipv4/udp.c | 14 + net/ipv6/af_inet6.c | 66 ++- net/ipv6/tcp_ipv6.c | 16 + net/ipv6/udp.c | 20 + tools/include/uapi/linux/bpf.h | 51 ++- tools/lib/bpf/bpf.c | 44 +- tools/lib/bpf/bpf.h | 17 +- tools/lib/bpf/libbpf.c | 113 +++-- tools/lib/bpf/libbpf.h | 8 + tools/testing/selftests/bpf/Makefile | 10 +- tools/testing/selftests/bpf/bpf_helpers.h | 2 + tools/testing/selftests/bpf/connect4_prog.c | 45 ++ tools/testing/selftests/bpf/connect6_prog.c | 61 +++ tools/testing/selftests/bpf/test_sock.c | 479 +++++++++++++++++++++ tools/testing/selftests/bpf/test_sock_addr.c | 588 ++++++++++++++++++++++++++ tools/testing/selftests/bpf/test_sock_addr.sh | 57 +++ 33 files changed, 2314 insertions(+), 132 deletions(-) create mode 100644 tools/testing/selftests/bpf/connect4_prog.c create mode 100644 tools/testing/selftests/bpf/connect6_prog.c create mode 100644 tools/testing/selftests/bpf/test_sock.c create mode 100644 tools/testing/selftests/bpf/test_sock_addr.c create mode 100755 tools/testing/selftests/bpf/test_sock_addr.sh
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 1/9 bpf: Check attach type at prog load time
From: Andrey Ignatov <[email protected]>
== The problem ==
There are use-cases when a program of some type can be attached to multiple attach points and those attach points must have different permissions to access context or to call helpers.
E.g. context structure may have fields for both IPv4 and IPv6 but it doesn't make sense to read from / write to IPv6 field when attach point is somewhere in IPv4 stack.
Same applies to BPF-helpers: it may make sense to call some helper from some attach point, but not from other for same prog type.
== The solution ==
Introduce expected_attach_type field in in struct bpf_attr for BPF_PROG_LOAD command. If scenario described in "The problem" section is the case for some prog type, the field will be checked twice:
1) At load time prog type is checked to see if attach type for it must be known to validate program permissions correctly. Prog will be rejected with EINVAL if it's the case and expected_attach_type is not specified or has invalid value.
2) At attach time attach_type is compared with expected_attach_type, if prog type requires to have one, and, if they differ, attach will be rejected with EINVAL.
The expected_attach_type is now available as part of struct bpf_prog in both bpf_verifier_ops->is_valid_access() and bpf_verifier_ops->get_func_proto() () and can be used to check context accesses and calls to helpers correspondingly.
Initially the idea was discussed by Alexei Starovoitov <[email protected]> and Daniel Borkmann <[email protected]> here:
https://marc.info/?l=linux-netdev&m=152107378717201&w=2
--- include/linux/bpf.h | 5 ++++- include/linux/filter.h | 1 + include/uapi/linux/bpf.h | 5 +++++ kernel/bpf/cgroup.c | 3 ++- kernel/bpf/syscall.c | 31 ++++++++++++++++++++++++++++++- kernel/bpf/verifier.c | 6 +++--- kernel/trace/bpf_trace.c | 27 ++++++++++++++++++--------- net/core/filter.c | 39 +++++++++++++++++++++++++-------------- 8 files changed, 88 insertions(+), 29 deletions(-)
include/linux/bpf.h +4 -1
@@ -208,12 +208,15 @@ struct bpf_prog_ops {struct bpf_verifier_ops {/* return eBPF function prototype for verification */ -const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); +const struct bpf_func_proto * + (*get_func_proto)(enum bpf_func_id func_id, +const struct bpf_prog *prog);/* return true if 'size' wide access at offset 'off' within bpf_context * with 'type' (read or write) is allowed */ bool (*is_valid_access)(int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info);int (*gen_prologue)(struct bpf_insn *insn,bool direct_write,const struct bpf_prog *prog);
include/linux/filter.h +1 -0
@@ -469,6 +469,7 @@ struct bpf_prog { is_func:1 ,/* program is a bpf function */ kprobe_override:1; /* Do we override a kprobe? */enum bpf_prog_type type;/* Type of BPF program */ +enum bpf_attach_type expected_attach_type;/* For some prog types */ u32 len;/* Number of filter blocks */ u32 jited_len;/* Size of jited insns in bytes */ u8 tag[BPF_TAG_SIZE ];
include/uapi/linux/bpf.h +5 -0
@@ -296,6 +296,11 @@ union bpf_attr {__u32 prog_flags;char prog_name[BPF_OBJ_NAME_LEN ];__u32 prog_ifindex;/* ifindex of netdev to prep for */ +/* For some prog types expected attach type must be known at +* load time to verify attach type specific parts of prog +* (context accesses, allowed helpers, etc). +*/ +__u32 expected_attach_type; };struct {/* anonymous struct used by BPF_OBJ_* commands */
kernel/bpf/cgroup.c +2 -1
@@ -545,7 +545,7 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor,EXPORT_SYMBOL (__cgroup_bpf_check_dev_permission);static const struct bpf_func_proto * -cgroup_dev_func_proto (enum bpf_func_id func_id) +cgroup_dev_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_map_lookup_elem:
@@ -566,6 +566,7 @@ cgroup_dev_func_proto(enum bpf_func_id func_id)static bool cgroup_dev_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {const int size_default =sizeof (__u32);
kernel/bpf/syscall.c +30 -1
@@ -1171,8 +1171,27 @@ struct bpf_prog *bpf_prog_get_type_dev(u32 ufd, enum bpf_prog_type type, }EXPORT_SYMBOL_GPL (bpf_prog_get_type_dev); +static int +bpf_prog_load_check_attach_type (enum bpf_prog_type prog_type, +enum bpf_attach_type expected_attach_type) +{ +/* There are currently no prog types that require specifying +* attach_type at load time. +*/ +return 0 ; +} + +static int bpf_prog_attach_check_attach_type (const struct bpf_prog *prog, +enum bpf_attach_type attach_type) +{ +/* There are currently no prog types that require specifying +* attach_type at load time. +*/ +return 0 ; +} +/* last field in 'union bpf_attr' used by this command */ -#define BPF_PROG_LOAD_LAST_FIELD prog_ifindex +#define BPF_PROG_LOAD_LAST_FIELD expected_attach_typestatic int bpf_prog_load (union bpf_attr *attr) {
@@ -1209,11 +1228,16 @@ static int bpf_prog_load(union bpf_attr *attr) !capable(CAP_SYS_ADMIN))return -EPERM ; +if (bpf_prog_load_check_attach_type (type, attr->expected_attach_type)) +return -EINVAL ; +/* plain bpf_prog allocation */ prog =bpf_prog_alloc (bpf_prog_size (attr->insn_cnt),GFP_USER );if (!prog)return -ENOMEM ; + prog->expected_attach_type = attr->expected_attach_type; + prog->aux->offload_requested = !!attr->prog_ifindex; err =security_bpf_prog_alloc (prog->aux);
@@ -1474,6 +1498,11 @@ static int bpf_prog_attach(const union bpf_attr *attr)if (IS_ERR (prog))return PTR_ERR (prog); +if (bpf_prog_attach_check_attach_type (prog, attr->attach_type)) { +bpf_prog_put (prog); +return -EINVAL ; + } + cgrp =cgroup_get_from_fd (attr->target_fd);if (IS_ERR (cgrp)) {bpf_prog_put (prog);
kernel/bpf/verifier.c +3 -3
@@ -1323,7 +1323,7 @@ static int check_ctx_access(struct bpf_verifier_env *env, int insn_idx, int off, };if (env->ops->is_valid_access && - env->ops->is_valid_access (off, size, t, &info)) { + env->ops->is_valid_access (off, size, t, env->prog, &info)) {/* A non zero info.ctx_field_size indicates that this field is a * candidate for later verifier transformation to load the whole * field and then apply a mask when accessed with a narrower
@@ -2349,7 +2349,7 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn }if (env->ops->get_func_proto) - fn = env->ops->get_func_proto (func_id); + fn = env->ops->get_func_proto (func_id, env->prog);if (!fn) {verbose (env,"unknown func %s#%d\n" ,func_id_name (func_id), func_id);
@@ -5572,7 +5572,7 @@ static int fixup_bpf_calls(struct bpf_verifier_env *env) insn = new_prog->insnsi + i + delta; } patch_call_imm: - fn = env->ops->get_func_proto (insn->imm); + fn = env->ops->get_func_proto (insn->imm, env->prog);/* all functions that have prototype and verifier allowed * programs to call them, must be real in-kernel functions */
kernel/trace/bpf_trace.c +18 -9
@@ -524,7 +524,8 @@ static const struct bpf_func_proto bpf_probe_read_str_proto = { .arg3_type = ARG_ANYTHING, }; -static const struct bpf_func_proto *tracing_func_proto (enum bpf_func_id func_id) +static const struct bpf_func_proto * +tracing_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_map_lookup_elem:
@@ -568,7 +569,8 @@ static const struct bpf_func_proto *tracing_func_proto(enum bpf_func_id func_id) } } -static const struct bpf_func_proto *kprobe_prog_func_proto (enum bpf_func_id func_id) +static const struct bpf_func_proto * +kprobe_prog_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_perf_event_output:
@@ -582,12 +584,13 @@ static const struct bpf_func_proto *kprobe_prog_func_proto(enum bpf_func_id funcreturn &bpf_override_return_proto;#endif default : -return tracing_func_proto (func_id); +return tracing_func_proto (func_id, prog); } }/* bpf+kprobe programs can access fields of 'struct pt_regs' */ static bool kprobe_prog_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {if (off <0 || off >=sizeof (struct pt_regs ))
@@ -661,7 +664,8 @@ static const struct bpf_func_proto bpf_get_stackid_proto_tp = { .arg3_type = ARG_ANYTHING, }; -static const struct bpf_func_proto *tp_prog_func_proto (enum bpf_func_id func_id) +static const struct bpf_func_proto * +tp_prog_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_perf_event_output:
@@ -669,11 +673,12 @@ static const struct bpf_func_proto *tp_prog_func_proto(enum bpf_func_id func_id)case BPF_FUNC_get_stackid:return &bpf_get_stackid_proto_tp;default : -return tracing_func_proto (func_id); +return tracing_func_proto (func_id, prog); } }static bool tp_prog_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {if (off <sizeof (void *) || off >=PERF_MAX_TRACE_SIZE )
@@ -721,7 +726,8 @@ static const struct bpf_func_proto bpf_perf_prog_read_value_proto = { .arg3_type = ARG_CONST_SIZE, }; -static const struct bpf_func_proto *pe_prog_func_proto (enum bpf_func_id func_id) +static const struct bpf_func_proto * +pe_prog_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_perf_event_output:
@@ -731,7 +737,7 @@ static const struct bpf_func_proto *pe_prog_func_proto(enum bpf_func_id func_id)case BPF_FUNC_perf_prog_read_value:return &bpf_perf_prog_read_value_proto;default : -return tracing_func_proto (func_id); +return tracing_func_proto (func_id, prog); } }
@@ -781,7 +787,8 @@ static const struct bpf_func_proto bpf_get_stackid_proto_raw_tp = { .arg3_type = ARG_ANYTHING, }; -static const struct bpf_func_proto *raw_tp_prog_func_proto (enum bpf_func_id func_id) +static const struct bpf_func_proto * +raw_tp_prog_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_perf_event_output:
@@ -789,12 +796,13 @@ static const struct bpf_func_proto *raw_tp_prog_func_proto(enum bpf_func_id funccase BPF_FUNC_get_stackid:return &bpf_get_stackid_proto_raw_tp;default : -return tracing_func_proto (func_id); +return tracing_func_proto (func_id, prog); } }static bool raw_tp_prog_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {/* largest tracepoint in the kernel has 12 args */
@@ -816,6 +824,7 @@ const struct bpf_prog_ops raw_tracepoint_prog_ops = { };static bool pe_prog_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {const int size_u64 =sizeof (u64);
net/core/filter.c +25 -14
@@ -3685,7 +3685,7 @@ bpf_base_func_proto(enum bpf_func_id func_id) }static const struct bpf_func_proto * -sock_filter_func_proto (enum bpf_func_id func_id) +sock_filter_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {/* inet and inet6 sockets are created in a process
@@ -3699,7 +3699,7 @@ sock_filter_func_proto(enum bpf_func_id func_id) }static const struct bpf_func_proto * -sk_filter_func_proto (enum bpf_func_id func_id) +sk_filter_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_skb_load_bytes:
@@ -3714,7 +3714,7 @@ sk_filter_func_proto(enum bpf_func_id func_id) }static const struct bpf_func_proto * -tc_cls_act_func_proto (enum bpf_func_id func_id) +tc_cls_act_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_skb_store_bytes:
@@ -3781,7 +3781,7 @@ tc_cls_act_func_proto(enum bpf_func_id func_id) }static const struct bpf_func_proto * -xdp_func_proto (enum bpf_func_id func_id) +xdp_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_perf_event_output:
@@ -3804,7 +3804,7 @@ xdp_func_proto(enum bpf_func_id func_id) }static const struct bpf_func_proto * -lwt_inout_func_proto (enum bpf_func_id func_id) +lwt_inout_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_skb_load_bytes:
@@ -3831,7 +3831,7 @@ lwt_inout_func_proto(enum bpf_func_id func_id) }static const struct bpf_func_proto * -sock_ops_func_proto (enum bpf_func_id func_id) +sock_ops_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_setsockopt:
@@ -3847,7 +3847,8 @@ static const struct bpf_func_proto * } } -static const struct bpf_func_proto *sk_msg_func_proto (enum bpf_func_id func_id) +static const struct bpf_func_proto * +sk_msg_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_msg_redirect_map:
@@ -3863,7 +3864,8 @@ static const struct bpf_func_proto *sk_msg_func_proto(enum bpf_func_id func_id) } } -static const struct bpf_func_proto *sk_skb_func_proto (enum bpf_func_id func_id) +static const struct bpf_func_proto * +sk_skb_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_skb_store_bytes:
@@ -3888,7 +3890,7 @@ static const struct bpf_func_proto *sk_skb_func_proto(enum bpf_func_id func_id) }static const struct bpf_func_proto * -lwt_xmit_func_proto (enum bpf_func_id func_id) +lwt_xmit_func_proto (enum bpf_func_id func_id,const struct bpf_prog *prog) {switch (func_id) {case BPF_FUNC_skb_get_tunnel_key:
@@ -3918,11 +3920,12 @@ lwt_xmit_func_proto(enum bpf_func_id func_id)case BPF_FUNC_set_hash_invalid:return &bpf_set_hash_invalid_proto;default : -return lwt_inout_func_proto (func_id); +return lwt_inout_func_proto (func_id, prog); } }static bool bpf_skb_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {const int size_default =sizeof (__u32);
@@ -3966,6 +3969,7 @@ static bool bpf_skb_is_valid_access(int off, int size, enum bpf_access_type typestatic bool sk_filter_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {switch (off) {
@@ -3986,11 +3990,12 @@ static bool sk_filter_is_valid_access(int off, int size, } } -return bpf_skb_is_valid_access (off, size, type, info); +return bpf_skb_is_valid_access (off, size, type, prog, info); }static bool lwt_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {switch (off) {
@@ -4020,11 +4025,12 @@ static bool lwt_is_valid_access(int off, int size,break ; } -return bpf_skb_is_valid_access (off, size, type, info); +return bpf_skb_is_valid_access (off, size, type, prog, info); }static bool sock_filter_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {if (type ==BPF_WRITE ) {
@@ -4096,6 +4102,7 @@ static int tc_cls_act_prologue(struct bpf_insn *insn_buf, bool direct_write,static bool tc_cls_act_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {if (type ==BPF_WRITE ) {
@@ -4125,7 +4132,7 @@ static bool tc_cls_act_is_valid_access(int off, int size,return false; } -return bpf_skb_is_valid_access (off, size, type, info); +return bpf_skb_is_valid_access (off, size, type, prog, info); }static bool __is_valid_xdp_access (int off,int size)
@@ -4142,6 +4149,7 @@ static bool __is_valid_xdp_access(int off, int size)static bool xdp_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {if (type ==BPF_WRITE )
@@ -4174,6 +4182,7 @@ EXPORT_SYMBOL_GPL(bpf_warn_invalid_xdp_action);static bool sock_ops_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {const int size_default =sizeof (__u32);
@@ -4220,6 +4229,7 @@ static int sk_skb_prologue(struct bpf_insn *insn_buf, bool direct_write,static bool sk_skb_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {switch (off) {
@@ -4249,11 +4259,12 @@ static bool sk_skb_is_valid_access(int off, int size,break ; } -return bpf_skb_is_valid_access (off, size, type, info); +return bpf_skb_is_valid_access (off, size, type, prog, info); }static bool sk_msg_is_valid_access (int off,int size,enum bpf_access_type type, +const struct bpf_prog *prog,struct bpf_insn_access_aux *info) {if (type ==BPF_WRITE )
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 2/9 libbpf: Support expected_attach_type at prog load
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
Support setting expected_attach_type at prog load time in both bpf/bpf.h and bpf/libbpf.h.
Since both headers already have API to load programs, new functions are added not to break backward compatibility for existing ones:
* bpf_load_program_xattr() is added to bpf/bpf.h;
* bpf_prog_load_xattr() is added to bpf/libbpf.h.
Both new functions accept structures, struct bpf_load_program_attr and struct bpf_prog_load_attr correspondingly, where new fields can be added in the future w/o changing the API.
Standard _xattr suffix is used to name the new API functions.
Since bpf_load_program_name() is not used as heavily as bpf_load_program(), it was removed in favor of more generic bpf_load_program_xattr().
--- tools/include/uapi/linux/bpf.h | 5 ++ tools/lib/bpf/bpf.c | 44 +++++++++++------ tools/lib/bpf/bpf.h | 17 +++++-- tools/lib/bpf/libbpf.c | 105 +++++++++++++++++++++++++++++++---------- tools/lib/bpf/libbpf.h | 8 ++++ 5 files changed, 133 insertions(+), 46 deletions(-)
tools/include/uapi/linux/bpf.h +5 -0
@@ -296,6 +296,11 @@ union bpf_attr {__u32 prog_flags;char prog_name[BPF_OBJ_NAME_LEN ];__u32 prog_ifindex;/* ifindex of netdev to prep for */ +/* For some prog types expected attach type must be known at +* load time to verify attach type specific parts of prog +* (context accesses, allowed helpers, etc). +*/ +__u32 expected_attach_type; };struct {/* anonymous struct used by BPF_OBJ_* commands */
tools/lib/bpf/bpf.c +29 -15
63 lines not on this page · raw message
tools/lib/bpf/bpf.h +12 -5
@@ -41,13 +41,20 @@ int bpf_create_map_in_map(enum bpf_map_type map_type, const char *name, int key_size, int inner_map_fd, int max_entries, __u32 map_flags); +struct bpf_load_program_attr { +enum bpf_prog_type prog_type; +enum bpf_attach_type expected_attach_type; +const char *name; +const struct bpf_insn *insns; +size_t insns_cnt; +const char *license; +__u32 kern_version; +}; +/* Recommend log buffer size */ #define BPF_LOG_BUF_SIZE (256 * 1024) -int bpf_load_program_name (enum bpf_prog_type type,const char *name, -const struct bpf_insn *insns, -size_t insns_cnt,const char *license, -__u32 kern_version,char *log_buf, -size_t log_buf_sz); +int bpf_load_program_xattr (const struct bpf_load_program_attr *load_attr, +char *log_buf,size_t log_buf_sz); int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns, size_t insns_cnt, const char *license, __u32 kern_version, char *log_buf,
tools/lib/bpf/libbpf.c +79 -26
199 lines not on this page · raw message
tools/lib/bpf/libbpf.h +8 -0
@@ -248,6 +248,14 @@ int bpf_map__pin(struct bpf_map *map, const char *path);long libbpf_get_error (const void *ptr); +struct bpf_prog_load_attr { +const char *file; +enum bpf_prog_type prog_type; +enum bpf_attach_type expected_attach_type; +}; + +int bpf_prog_load_xattr (const struct bpf_prog_load_attr *attr, +struct bpf_object **pobj,int *prog_fd);int bpf_prog_load (const char *file,enum bpf_prog_type type,struct bpf_object **pobj,int *prog_fd);
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 3/9 bpf: Hooks for sys_bind
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
== The problem ==
There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible.
Currently it's solved by intercepting glibc wrappers around syscalls such as bind(2) and connect(2). It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls bind(2), the library replaces IP in sockaddr before passing arguments to syscall. When application calls connect(2) the library transparently binds the local end of connection to that IP (bind(2) with IP_BIND_ADDRESS_NO_PORT to avoid performance penalty).
Shared library approach is fragile though, e.g.:
* some applications clear env vars (incl. LD_PRELOAD);
* /etc/ld.so.preload doesn't help since some applications are linked with option -z nodefaultlib;
* other applications don't use glibc and there is nothing to intercept.
== The solution ==
The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not).
It adds new eBPF program type BPF_PROG_TYPE_CGROUP_SOCK_ADDR and attach types BPF_CGROUP_INET4_BIND and BPF_CGROUP_INET6_BIND (similar to already existing BPF_CGROUP_INET_SOCK_CREATE).
The new program type is intended to be used with sockets (struct sock) in a cgroup and provided by user struct sockaddr. Pointers to both of them are parts of the context passed to programs of newly added types.
The new attach types provides hooks in bind(2) system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup.
== Implementation notes ==
[1]
Separate attach types for AF_INET and AF_INET6 are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes sockaddr_in it doesn't make sense to read from / write to user_ip6[] context fields.
[2]
The write access to struct bpf_sock_addr_kern is implemented using special field as an additional "register".
There are just two registers in sock_addr_convert_ctx_access: src with value to write and dst with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by src and dst one is taken, its content is saved to bpf_sock_addr_kern.tmp_reg, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing src value.
--- include/linux/bpf-cgroup.h | 21 ++++ include/linux/bpf_types.h | 1 + include/linux/filter.h | 10 ++ include/uapi/linux/bpf.h | 23 +++++ kernel/bpf/cgroup.c | 36 +++++++ kernel/bpf/syscall.c | 36 +++++-- kernel/bpf/verifier.c | 1 + net/core/filter.c | 232 +++++++++++++++++++++++++++++++++++++++++++++ net/ipv4/af_inet.c | 7 ++ net/ipv6/af_inet6.c | 7 ++ 10 files changed, 366 insertions(+), 8 deletions(-)
include/linux/bpf-cgroup.h +21 -0
@@ -6,6 +6,7 @@#include <uapi/linux/bpf.h> struct sock ; +struct sockaddr ;struct cgroup ;struct sk_buff ;struct bpf_sock_ops_kern ;
@@ -63,6 +64,10 @@ int __cgroup_bpf_run_filter_skb(struct sock *sk,int __cgroup_bpf_run_filter_sk (struct sock *sk,enum bpf_attach_type type); +int __cgroup_bpf_run_filter_sock_addr (struct sock *sk, +struct sockaddr *uaddr, +enum bpf_attach_type type); +int __cgroup_bpf_run_filter_sock_ops (struct sock *sk,struct bpf_sock_ops_kern *sock_ops,enum bpf_attach_type type);
@@ -103,6 +108,20 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor, __ret; \ }) +#define BPF_CGROUP_RUN_SA_PROG (sk, uaddr, type) \ +({ \ + int __ret = 0; \ + if (cgroup_bpf_enabled) \ + __ret = __cgroup_bpf_run_filter_sock_addr(sk, uaddr, type); \ + __ret; \ +}) + +#define BPF_CGROUP_RUN_PROG_INET4_BIND (sk, uaddr) \ + BPF_CGROUP_RUN_SA_PROG(sk, uaddr, BPF_CGROUP_INET4_BIND) + +#define BPF_CGROUP_RUN_PROG_INET6_BIND (sk, uaddr) \ + BPF_CGROUP_RUN_SA_PROG(sk, uaddr, BPF_CGROUP_INET6_BIND) +#define BPF_CGROUP_RUN_PROG_SOCK_OPS (sock_ops) \ ({ \ int __ret = 0; \
@@ -135,6 +154,8 @@ static inline int cgroup_bpf_inherit(struct cgroup *cgrp) { return 0; }#define BPF_CGROUP_RUN_PROG_INET_INGRESS (sk,skb) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET_EGRESS (sk,skb) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET_SOCK (sk) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET4_BIND (sk, uaddr) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET6_BIND (sk, uaddr) ({ 0; })#define BPF_CGROUP_RUN_PROG_SOCK_OPS (sock_ops) ({ 0; })#define BPF_CGROUP_RUN_PROG_DEVICE_CGROUP (type,major,minor,access) ({ 0; })
include/linux/bpf_types.h +1 -0
@@ -8,6 +8,7 @@ BPF_PROG_TYPE(BPF_PROG_TYPE_SCHED_ACT, tc_cls_act) BPF_PROG_TYPE(BPF_PROG_TYPE_XDP, xdp) BPF_PROG_TYPE(BPF_PROG_TYPE_CGROUP_SKB, cg_skb) BPF_PROG_TYPE(BPF_PROG_TYPE_CGROUP_SOCK, cg_sock) +BPF_PROG_TYPE(BPF_PROG_TYPE_CGROUP_SOCK_ADDR, cg_sock_addr) BPF_PROG_TYPE(BPF_PROG_TYPE_LWT_IN, lwt_inout) BPF_PROG_TYPE(BPF_PROG_TYPE_LWT_OUT, lwt_inout)BPF_PROG_TYPE (BPF_PROG_TYPE_LWT_XMIT , lwt_xmit)
include/linux/filter.h +10 -0
@@ -1021,6 +1021,16 @@ static inline int bpf_tell_extensions(void)return SKF_AD_MAX ; } +struct bpf_sock_addr_kern { +struct sock *sk; +struct sockaddr *uaddr; +/* Temporary "register" to make indirect stores to nested structures +* defined above. We need three registers to make such a store, but +* only two (src and dst) are available at convert_ctx_access time +*/ +u64 tmp_reg; +}; +struct bpf_sock_ops_kern {struct sock *sk;u32 op;
include/uapi/linux/bpf.h +23 -0
@@ -136,6 +136,7 @@ enum bpf_prog_type {BPF_PROG_TYPE_CGROUP_DEVICE ,BPF_PROG_TYPE_SK_MSG ,BPF_PROG_TYPE_RAW_TRACEPOINT , + BPF_PROG_TYPE_CGROUP_SOCK_ADDR, }; enum bpf_attach_type {
@@ -147,6 +148,8 @@ enum bpf_attach_type {BPF_SK_SKB_STREAM_VERDICT ,BPF_CGROUP_DEVICE ,BPF_SK_MSG_VERDICT , +BPF_CGROUP_INET4_BIND , +BPF_CGROUP_INET6_BIND , __MAX_BPF_ATTACH_TYPE };
@@ -1010,6 +1013,26 @@ struct bpf_map_info {__u64 netns_ino; } __attribute__((aligned(8))); +/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed +* by user and intended to be used by socket (e.g. to bind to, depends on +* attach attach type). +*/ +struct bpf_sock_addr { +__u32 user_family;/* Allows 4-byte read, but no write. */ +__u32 user_ip4;/* Allows 1,2,4-byte read and 4-byte write. +* Stored in network byte order. +*/ +__u32 user_ip6[4 ];/* Allows 1,2,4-byte read an 4-byte write. +* Stored in network byte order. +*/ +__u32 user_port;/* Allows 4-byte read and write. +* Stored in network byte order +*/ +__u32 family;/* Allows 4-byte read, but no write */ +__u32 type;/* Allows 4-byte read, but no write */ +__u32 protocol;/* Allows 4-byte read, but no write */ +}; +/* User bpf_sock_ops struct to access socket values and specify request ops * and their replies. * Some of this fields are in network (bigendian) byte order and may need
kernel/bpf/cgroup.c +36 -0
@@ -495,6 +495,42 @@ int __cgroup_bpf_run_filter_sk(struct sock *sk,EXPORT_SYMBOL (__cgroup_bpf_run_filter_sk);/** +* __cgroup_bpf_run_filter_sock_addr() - Run a program on a sock and +* provided by user sockaddr +* @sk: sock struct that will use sockaddr +* @uaddr: sockaddr struct provided by user +* @type: The type of program to be exectuted +* +* socket is expected to be of type INET or INET6. +* +* This function will return %-EPERM if an attached program is found and +* returned value != 1 during execution. In all other cases, 0 is returned. +*/ +int __cgroup_bpf_run_filter_sock_addr (struct sock *sk, +struct sockaddr *uaddr, +enum bpf_attach_type type) +{ +struct bpf_sock_addr_kern ctx = { + .sk = sk, + .uaddr = uaddr, + }; +struct cgroup *cgrp; +int ret; + +/* Check socket family since not all sockets represent network +* endpoint (e.g. AF_UNIX). +*/ +if (sk->sk_family !=AF_INET && sk->sk_family !=AF_INET6 ) +return 0 ; + + cgrp =sock_cgroup_ptr (&sk->sk_cgrp_data); + ret =BPF_PROG_RUN_ARRAY (cgrp->bpf.effective[type], &ctx,BPF_PROG_RUN ); + +return ret ==1 ?0 : -EPERM ; +} +EXPORT_SYMBOL (__cgroup_bpf_run_filter_sock_addr); + +/** * __cgroup_bpf_run_filter_sock_ops() - Run a program on a sock * @sk: socket to get cgroup from * @sock_ops: bpf_sock_ops_kern struct to pass to program. Contains
kernel/bpf/syscall.c +28 -8
@@ -1175,19 +1175,29 @@ static int bpf_prog_load_check_attach_type(enum bpf_prog_type prog_type, enum bpf_attach_type expected_attach_type) { -/* There are currently no prog types that require specifying -* attach_type at load time. -*/ -return 0 ; + switch (prog_type) { + case BPF_PROG_TYPE_CGROUP_SOCK_ADDR: + switch (expected_attach_type) { + case BPF_CGROUP_INET4_BIND: + case BPF_CGROUP_INET6_BIND: + return 0; +default : +return -EINVAL ; + } +default : +return 0 ; + } } static int bpf_prog_attach_check_attach_type(const struct bpf_prog *prog, enum bpf_attach_type attach_type) { -/* There are currently no prog types that require specifying -* attach_type at load time. -*/ -return 0 ; +switch (prog->type) { +case BPF_PROG_TYPE_CGROUP_SOCK_ADDR : +return attach_type == prog->expected_attach_type ?0 : -EINVAL ; +default : +return 0 ; + } }/* last field in 'union bpf_attr' used by this command */
@@ -1479,6 +1489,10 @@ static int bpf_prog_attach(const union bpf_attr *attr)case BPF_CGROUP_INET_SOCK_CREATE : ptype =BPF_PROG_TYPE_CGROUP_SOCK ;break ; +case BPF_CGROUP_INET4_BIND : +case BPF_CGROUP_INET6_BIND : + ptype =BPF_PROG_TYPE_CGROUP_SOCK_ADDR ; +break ;case BPF_CGROUP_SOCK_OPS : ptype =BPF_PROG_TYPE_SOCK_OPS ;break ;
@@ -1541,6 +1555,10 @@ static int bpf_prog_detach(const union bpf_attr *attr)case BPF_CGROUP_INET_SOCK_CREATE : ptype =BPF_PROG_TYPE_CGROUP_SOCK ;break ; +case BPF_CGROUP_INET4_BIND : +case BPF_CGROUP_INET6_BIND : + ptype =BPF_PROG_TYPE_CGROUP_SOCK_ADDR ; +break ;case BPF_CGROUP_SOCK_OPS : ptype =BPF_PROG_TYPE_SOCK_OPS ;break ;
@@ -1590,6 +1608,8 @@ static int bpf_prog_query(const union bpf_attr *attr,case BPF_CGROUP_INET_INGRESS :case BPF_CGROUP_INET_EGRESS :case BPF_CGROUP_INET_SOCK_CREATE : +case BPF_CGROUP_INET4_BIND : +case BPF_CGROUP_INET6_BIND :case BPF_CGROUP_SOCK_OPS :case BPF_CGROUP_DEVICE :break ;
kernel/bpf/verifier.c +1 -0
@@ -3887,6 +3887,7 @@ static int check_return_code(struct bpf_verifier_env *env)switch (env->prog->type) {case BPF_PROG_TYPE_CGROUP_SKB :case BPF_PROG_TYPE_CGROUP_SOCK : +case BPF_PROG_TYPE_CGROUP_SOCK_ADDR :case BPF_PROG_TYPE_SOCK_OPS :case BPF_PROG_TYPE_CGROUP_DEVICE :break ;
net/core/filter.c +232 -0
256 lines not on this page · raw message
net/ipv4/af_inet.c +7 -0
@@ -450,6 +450,13 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)if (addr_len <sizeof (struct sockaddr_in )) goto out; +/* BPF prog is run before any checks are done so that if the prog +* changes context in a wrong way it will be caught. +*/ + err =BPF_CGROUP_RUN_PROG_INET4_BIND (sk, uaddr); +if (err) + goto out; +if (addr->sin_family !=AF_INET ) {/* Compatibility games : accept AF_UNSPEC (mapped to AF_INET) * only if s_addr is INADDR_ANY.
net/ipv6/af_inet6.c +7 -0
@@ -295,6 +295,13 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)if (addr_len <SIN6_LEN_RFC2133 )return -EINVAL ; +/* BPF prog is run before any checks are done so that if the prog +* changes context in a wrong way it will be caught. +*/ + err =BPF_CGROUP_RUN_PROG_INET6_BIND (sk, uaddr); +if (err) +return err; +if (addr->sin6_family !=AF_INET6 )return -EAFNOSUPPORT ;
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 4/9 selftests/bpf: Selftest for sys_bind hooks
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
Add selftest to work with bpf_sock_addr context from BPF_PROG_TYPE_CGROUP_SOCK_ADDR programs.
Try to bind(2) on IP:port and apply:
* loads to make sure context can be read correctly, including narrow loads (byte, half) for IP and full-size loads (word) for all fields;
* stores to those fields allowed by verifier.
All combination from IPv4/IPv6 and TCP/UDP are tested.
Both scenarios are tested:
* valid programs can be loaded and attached;
* invalid programs can be neither loaded nor attached.
Test passes when expected data can be read from context in the BPF-program, and after the call to bind(2) socket is bound to IP:port pair that was written by BPF-program to the context.
Example:
# ./test_sock_addr
Attached bind4 program.
Test case #1 (IPv4/TCP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Test case #2 (IPv4/UDP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Attached bind6 program.
Test case #3 (IPv6/TCP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
Test case #4 (IPv6/UDP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
### SUCCESS--- tools/include/uapi/linux/bpf.h | 23 ++ tools/lib/bpf/libbpf.c | 6 + tools/testing/selftests/bpf/Makefile | 3 +- tools/testing/selftests/bpf/test_sock_addr.c | 486 +++++++++++++++++++++++++++ 4 files changed, 517 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/bpf/test_sock_addr.c
tools/include/uapi/linux/bpf.h +23 -0
@@ -136,6 +136,7 @@ enum bpf_prog_type {BPF_PROG_TYPE_CGROUP_DEVICE ,BPF_PROG_TYPE_SK_MSG ,BPF_PROG_TYPE_RAW_TRACEPOINT , + BPF_PROG_TYPE_CGROUP_SOCK_ADDR, }; enum bpf_attach_type {
@@ -147,6 +148,8 @@ enum bpf_attach_type {BPF_SK_SKB_STREAM_VERDICT ,BPF_CGROUP_DEVICE ,BPF_SK_MSG_VERDICT , +BPF_CGROUP_INET4_BIND , +BPF_CGROUP_INET6_BIND , __MAX_BPF_ATTACH_TYPE };
@@ -1009,6 +1012,26 @@ struct bpf_map_info {__u64 netns_ino; } __attribute__((aligned(8))); +/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed +* by user and intended to be used by socket (e.g. to bind to, depends on +* attach attach type). +*/ +struct bpf_sock_addr { +__u32 user_family;/* Allows 4-byte read, but no write. */ +__u32 user_ip4;/* Allows 1,2,4-byte read and 4-byte write. +* Stored in network byte order. +*/ +__u32 user_ip6[4 ];/* Allows 1,2,4-byte read an 4-byte write. +* Stored in network byte order. +*/ +__u32 user_port;/* Allows 4-byte read and write. +* Stored in network byte order +*/ +__u32 family;/* Allows 4-byte read, but no write */ +__u32 type;/* Allows 4-byte read, but no write */ +__u32 protocol;/* Allows 4-byte read, but no write */ +}; +/* User bpf_sock_ops struct to access socket values and specify request ops * and their replies. * Some of this fields are in network (bigendian) byte order and may need
tools/lib/bpf/libbpf.c +6 -0
@@ -1859,6 +1859,9 @@ static void bpf_program__set_expected_attach_type(struct bpf_program *prog,#define BPF_PROG_SEC (string, ptype) BPF_PROG_SEC_FULL(string, ptype, 0) +#define BPF_SA_PROG_SEC (string, ptype) \ + BPF_PROG_SEC_FULL(string, BPF_PROG_TYPE_CGROUP_SOCK_ADDR, ptype) + static const struct { const char *sec; size_t len;
@@ -1882,10 +1885,13 @@ static const struct {BPF_PROG_SEC ("sockops" ,BPF_PROG_TYPE_SOCK_OPS ),BPF_PROG_SEC ("sk_skb" ,BPF_PROG_TYPE_SK_SKB ),BPF_PROG_SEC ("sk_msg" ,BPF_PROG_TYPE_SK_MSG ), +BPF_SA_PROG_SEC ("cgroup/bind4" ,BPF_CGROUP_INET4_BIND ), + BPF_SA_PROG_SEC("cgroup/bind6", BPF_CGROUP_INET6_BIND), };#undef BPF_PROG_SEC#undef BPF_PROG_SEC_FULL +#undef BPF_SA_PROG_SECstatic int bpf_program__identify_section (struct bpf_program *prog) {
tools/testing/selftests/bpf/Makefile +2 -1
@@ -23,7 +23,7 @@ urandom_read: urandom_read.c # Order correspond to 'make run_tests' order TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \ - test_align test_verifier_log test_dev_cgroup test_tcpbpf_user + test_align test_verifier_log test_dev_cgroup test_tcpbpf_user test_sock_addr TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \ test_pkt_md_access.o test_xdp_redirect.o test_xdp_meta.o sockmap_parse_prog.o \
@@ -51,6 +51,7 @@ $(TEST_GEN_PROGS): $(BPFOBJ) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/libbpf.a $(OUTPUT)/test_dev_cgroup: cgroup_helpers.c +$(OUTPUT)/test_sock_addr: cgroup_helpers.c .PHONY: force
tools/testing/selftests/bpf/test_sock_addr.c new file +486 -0
486 lines not on this page · raw message
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 5/9 net: Introduce __inet_bind() and __inet6_bind
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
Refactor bind() code to make it ready to be called from BPF helper function bpf_bind() (will be added soon). Implementation of inet_bind() and inet6_bind() is separated into __inet_bind() and __inet6_bind() correspondingly. These function can be used from both sk_prot->bind and bpf_bind() contexts.
New functions have two additional arguments.
force_bind_address_no_port forces binding to IP only w/o checking inet_sock.bind_address_no_port field. It'll allow to bind local end of a connection to desired IP in bpf_bind() w/o changing bind_address_no_port field of a socket. It's useful since bpf_bind() can return an error and we'd need to restore original value of bind_address_no_port in that case if we changed this before calling to the helper.
with_lock specifies whether to lock socket when working with struct sk or not. The argument is set to true for sk_prot->bind, i.e. old behavior is preserved. But it will be set to false for bpf_bind() use-case. The reason is all call-sites, where bpf_bind() will be called, already hold that socket lock.
--- include/net/inet_common.h | 2 ++ include/net/ipv6.h | 2 ++ net/ipv4/af_inet.c | 39 ++++++++++++++++++++++++--------------- net/ipv6/af_inet6.c | 37 ++++++++++++++++++++++++------------- 4 files changed, 52 insertions(+), 28 deletions(-)
include/net/inet_common.h +2 -0
@@ -32,6 +32,8 @@ int inet_shutdown(struct socket *sock, int how);int inet_listen (struct socket *sock,int backlog);void inet_sock_destruct (struct sock *sk);int inet_bind (struct socket *sock,struct sockaddr *uaddr,int addr_len); +int __inet_bind (struct sock *sk,struct sockaddr *uaddr,int addr_len, +bool force_bind_address_no_port,bool with_lock);int inet_getname (struct socket *sock,struct sockaddr *uaddr,int peer);int inet_ioctl (struct socket *sock,unsigned int cmd,unsigned long arg);
include/net/ipv6.h +2 -0
@@ -1066,6 +1066,8 @@ void ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info);void ipv6_local_rxpmtu (struct sock *sk,struct flowi6 *fl6,u32 mtu);int inet6_release (struct socket *sock); +int __inet6_bind (struct sock *sock,struct sockaddr *uaddr,int addr_len, +bool force_bind_address_no_port,bool with_lock);int inet6_bind (struct socket *sock,struct sockaddr *uaddr,int addr_len);int inet6_getname (struct socket *sock,struct sockaddr *uaddr,int peer);
net/ipv4/af_inet.c +24 -15
@@ -432,30 +432,37 @@ EXPORT_SYMBOL(inet_release);int inet_bind (struct socket *sock,struct sockaddr *uaddr,int addr_len) { -struct sockaddr_in *addr = (struct sockaddr_in *)uaddr;struct sock *sk = sock->sk; -struct inet_sock *inet =inet_sk (sk); -struct net *net =sock_net (sk); -unsigned short snum; -int chk_addr_ret; -u32 tb_id =RT_TABLE_LOCAL ;int err;/* If the socket has its own bind function then use it. (RAW) */ if (sk->sk_prot->bind) { - err = sk->sk_prot->bind (sk, uaddr, addr_len); - goto out; +return sk->sk_prot->bind (sk, uaddr, addr_len); } - err = -EINVAL ;if (addr_len <sizeof (struct sockaddr_in )) - goto out; +return -EINVAL ;/* BPF prog is run before any checks are done so that if the prog * changes context in a wrong way it will be caught. */ err =BPF_CGROUP_RUN_PROG_INET4_BIND (sk, uaddr);if (err) - goto out; +return err; + +return __inet_bind (sk, uaddr, addr_len, false, true); +} +EXPORT_SYMBOL (inet_bind); + +int __inet_bind (struct sock *sk,struct sockaddr *uaddr,int addr_len, +bool force_bind_address_no_port,bool with_lock) +{ +struct sockaddr_in *addr = (struct sockaddr_in *)uaddr; +struct inet_sock *inet =inet_sk (sk); +struct net *net =sock_net (sk); +unsigned short snum; +int chk_addr_ret; +u32 tb_id =RT_TABLE_LOCAL ; +int err;if (addr->sin_family !=AF_INET ) {/* Compatibility games : accept AF_UNSPEC (mapped to AF_INET)
@@ -499,7 +506,8 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)* would be illegal to use them (multicast/broadcast) in * which case the sending device address is used. */ -lock_sock (sk); +if (with_lock) +lock_sock (sk);/* Check these errors (active socket, double bind). */ err = -EINVAL ;
@@ -511,7 +519,8 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) inet->inet_saddr =0 ;/* Use device */ /* Make sure we are allowed to bind here. */ -if ((snum || !inet->bind_address_no_port) && +if ((snum || !(inet->bind_address_no_port || + force_bind_address_no_port)) && sk->sk_prot->get_port (sk, snum)) { inet->inet_saddr = inet->inet_rcv_saddr =0 ; err = -EADDRINUSE ;
@@ -528,11 +537,11 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)sk_dst_reset (sk); err =0 ; out_release_sock: -release_sock (sk); +if (with_lock) +release_sock (sk); out:return err; } -EXPORT_SYMBOL (inet_bind);int inet_dgram_connect (struct socket *sock,struct sockaddr *uaddr,int addr_len,int flags)
net/ipv6/af_inet6.c +24 -13
@@ -277,15 +277,7 @@ static int inet6_create(struct net *net, struct socket *sock, int protocol,/* bind for INET6 API */ int inet6_bind (struct socket *sock,struct sockaddr *uaddr,int addr_len) { -struct sockaddr_in6 *addr = (struct sockaddr_in6 *)uaddr;struct sock *sk = sock->sk; -struct inet_sock *inet =inet_sk (sk); -struct ipv6_pinfo *np =inet6_sk (sk); -struct net *net =sock_net (sk); -__be32 v4addr =0 ; -unsigned short snum; -bool saved_ipv6only; -int addr_type =0 ;int err =0 ;/* If the socket has its own bind function then use it. */
@@ -302,11 +294,28 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)if (err)return err; +return __inet6_bind (sk, uaddr, addr_len, false, true); +} +EXPORT_SYMBOL (inet6_bind); + +int __inet6_bind (struct sock *sk,struct sockaddr *uaddr,int addr_len, +bool force_bind_address_no_port,bool with_lock) +{ +struct sockaddr_in6 *addr = (struct sockaddr_in6 *)uaddr; +struct inet_sock *inet =inet_sk (sk); +struct ipv6_pinfo *np =inet6_sk (sk); +struct net *net =sock_net (sk); +__be32 v4addr =0 ; +unsigned short snum; +bool saved_ipv6only; +int addr_type =0 ; +int err =0 ; +if (addr->sin6_family !=AF_INET6 )return -EAFNOSUPPORT ; addr_type =ipv6_addr_type (&addr->sin6_addr); -if ((addr_type &IPV6_ADDR_MULTICAST ) && sock->type ==SOCK_STREAM ) +if ((addr_type &IPV6_ADDR_MULTICAST ) && sk->sk_type ==SOCK_STREAM )return -EINVAL ; snum =ntohs (addr->sin6_port);
@@ -314,7 +323,8 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) !ns_capable(net->user_ns, CAP_NET_BIND_SERVICE))return -EACCES ; -lock_sock (sk); +if (with_lock) +lock_sock (sk);/* Check these errors (active socket, double bind). */ if (sk->sk_state !=TCP_CLOSE || inet->inet_num) {
@@ -402,7 +412,8 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) sk->sk_ipv6only =1 ;/* Make sure we are allowed to bind here. */ -if ((snum || !inet->bind_address_no_port) && +if ((snum || !(inet->bind_address_no_port || + force_bind_address_no_port)) && sk->sk_prot->get_port (sk, snum)) { sk->sk_ipv6only = saved_ipv6only;inet_reset_saddr (sk);
@@ -418,13 +429,13 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) inet->inet_dport =0 ; inet->inet_daddr =0 ; out: -release_sock (sk); +if (with_lock) +release_sock (sk);return err; out_unlock:rcu_read_unlock (); goto out; } -EXPORT_SYMBOL (inet6_bind);int inet6_release (struct socket *sock) {
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 6/9 bpf: Hooks for sys_connect
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
== The problem ==
See description of the problem in the initial patch of this patch set.
== The solution ==
The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP.
It adds new attach types BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT for program type BPF_PROG_TYPE_CGROUP_SOCK_ADDR that can be used to override both source and destination of a connection at connect(2) time.
Local end of connection can be bound to desired IP using newly introduced BPF-helper bpf_bind(). It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages IP_BIND_ADDRESS_NO_PORT socket option. There are two reasons for this:
* looking for a free port is expensive and can affect performance significantly;
* there is no use-case for port.
As for remote end (struct sockaddr * passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup.
Support is added for IPv4 and IPv6, for TCP and UDP.
IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound.
== Implementation notes ==
The patch introduces new field in struct proto: pre_connect that is a pointer to a function with same signature as connect but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to sk->sk_prot->connect. Specifically inet_dgram_connect autobinds socket before calling sk->sk_prot->connect and there is no way to call bpf_bind() from hooks from e.g. ip4_datagram_connect or ip6_datagram_connect since it'd cause double-bind. On the other hand proto.pre_connect provides a flexible way to add BPF hooks for connect only for necessary proto and call them at desired time before connect. Since bpf_bind() is allowed to bind only to IP and autobind in inet_dgram_connect binds only port there is no chance of double-bind.
bpf_bind() sets force_bind_address_no_port to bind to only IP despite of value of bind_address_no_port socket field.
bpf_bind() sets with_lock to false when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock.
--- include/linux/bpf-cgroup.h | 31 +++++++++++++++++++++++++ include/net/addrconf.h | 7 ++++++ include/net/sock.h | 3 +++ include/net/udp.h | 1 + include/uapi/linux/bpf.h | 12 +++++++++- kernel/bpf/syscall.c | 8 +++++++ net/core/filter.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++ net/ipv4/af_inet.c | 13 +++++++++++ net/ipv4/tcp_ipv4.c | 16 +++++++++++++ net/ipv4/udp.c | 14 ++++++++++++ net/ipv6/af_inet6.c | 5 ++++ net/ipv6/tcp_ipv6.c | 16 +++++++++++++ net/ipv6/udp.c | 20 ++++++++++++++++ 13 files changed, 202 insertions(+), 1 deletion(-)
include/linux/bpf-cgroup.h +31 -0
@@ -116,12 +116,38 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor, __ret; \ }) +#define BPF_CGROUP_RUN_SA_PROG_LOCK (sk, uaddr, type) \ +({ \ + int __ret = 0; \ + if (cgroup_bpf_enabled) { \ + lock_sock(sk); \ + __ret = __cgroup_bpf_run_filter_sock_addr(sk, uaddr, type); \ + release_sock(sk); \ + } \ + __ret; \ +}) +#define BPF_CGROUP_RUN_PROG_INET4_BIND (sk, uaddr) \ BPF_CGROUP_RUN_SA_PROG(sk, uaddr, BPF_CGROUP_INET4_BIND)#define BPF_CGROUP_RUN_PROG_INET6_BIND (sk, uaddr) \ BPF_CGROUP_RUN_SA_PROG(sk, uaddr, BPF_CGROUP_INET6_BIND) +#define BPF_CGROUP_PRE_CONNECT_ENABLED (sk) (cgroup_bpf_enabled && \ + sk->sk_prot->pre_connect) + +#define BPF_CGROUP_RUN_PROG_INET4_CONNECT (sk, uaddr) \ + BPF_CGROUP_RUN_SA_PROG(sk, uaddr, BPF_CGROUP_INET4_CONNECT) + +#define BPF_CGROUP_RUN_PROG_INET6_CONNECT (sk, uaddr) \ + BPF_CGROUP_RUN_SA_PROG(sk, uaddr, BPF_CGROUP_INET6_CONNECT) + +#define BPF_CGROUP_RUN_PROG_INET4_CONNECT_LOCK (sk, uaddr) \ + BPF_CGROUP_RUN_SA_PROG_LOCK(sk, uaddr, BPF_CGROUP_INET4_CONNECT) + +#define BPF_CGROUP_RUN_PROG_INET6_CONNECT_LOCK (sk, uaddr) \ + BPF_CGROUP_RUN_SA_PROG_LOCK(sk, uaddr, BPF_CGROUP_INET6_CONNECT) +#define BPF_CGROUP_RUN_PROG_SOCK_OPS (sock_ops) \ ({ \ int __ret = 0; \
@@ -151,11 +177,16 @@ struct cgroup_bpf {};static inline void cgroup_bpf_put (struct cgroup *cgrp) {}static inline int cgroup_bpf_inherit (struct cgroup *cgrp) {return 0 ; } +#define BPF_CGROUP_PRE_CONNECT_ENABLED (sk) (0)#define BPF_CGROUP_RUN_PROG_INET_INGRESS (sk,skb) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET_EGRESS (sk,skb) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET_SOCK (sk) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET4_BIND (sk, uaddr) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET6_BIND (sk, uaddr) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET4_CONNECT (sk, uaddr) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET4_CONNECT_LOCK (sk, uaddr) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET6_CONNECT (sk, uaddr) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET6_CONNECT_LOCK (sk, uaddr) ({ 0; })#define BPF_CGROUP_RUN_PROG_SOCK_OPS (sock_ops) ({ 0; })#define BPF_CGROUP_RUN_PROG_DEVICE_CGROUP (type,major,minor,access) ({ 0; })
include/net/addrconf.h +7 -0
@@ -231,6 +231,13 @@ struct ipv6_stub { };extern const struct ipv6_stub *ipv6_stub__read_mostly ; +/* A stub used by bpf helpers. Similarly ugly as ipv6_stub */ +struct ipv6_bpf_stub { +int (*inet6_bind)(struct sock *sk,struct sockaddr *uaddr,int addr_len, +bool force_bind_address_no_port,bool with_lock); +}; +extern const struct ipv6_bpf_stub *ipv6_bpf_stub__read_mostly ; +/* * identify MLD packets for MLD filter exceptions */
include/net/sock.h +3 -0
@@ -1026,6 +1026,9 @@ static inline void sk_prot_clear_nulls(struct sock *sk, int size)struct proto {void (*close)(struct sock *sk,long timeout); +int (*pre_connect)(struct sock *sk, +struct sockaddr *uaddr, +int addr_len);int (*connect)(struct sock *sk,struct sockaddr *uaddr,int addr_len);
include/net/udp.h +1 -0
@@ -273,6 +273,7 @@ void udp4_hwcsum(struct sk_buff *skb, __be32 src, __be32 dst);int udp_rcv (struct sk_buff *skb);int udp_ioctl (struct sock *sk,int cmd,unsigned long arg);int udp_init_sock (struct sock *sk); +int udp_pre_connect (struct sock *sk,struct sockaddr *uaddr,int addr_len);int __udp_disconnect (struct sock *sk,int flags);int udp_disconnect (struct sock *sk,int flags);__poll_t udp_poll (struct file *file,struct socket *sock,poll_table *wait);
include/uapi/linux/bpf.h +11 -1
@@ -150,6 +150,8 @@ enum bpf_attach_type {BPF_SK_MSG_VERDICT ,BPF_CGROUP_INET4_BIND ,BPF_CGROUP_INET6_BIND , +BPF_CGROUP_INET4_CONNECT , +BPF_CGROUP_INET6_CONNECT , __MAX_BPF_ATTACH_TYPE };
@@ -744,6 +746,13 @@ union bpf_attr {* @flags: reserved for future use * Return: SK_PASS * +* int bpf_bind(ctx, addr, addr_len) +* Bind socket to address. Only binding to IP is supported, no port can be +* set in addr. +* @ctx: pointer to context of type bpf_sock_addr +* @addr: pointer to struct sockaddr to bind socket to +* @addr_len: length of sockaddr structure +* Return: 0 on success or negative error code */ #define __BPF_FUNC_MAPPER (FN ) \ FN(unspec), \
@@ -809,7 +818,8 @@ union bpf_attr {FN (msg_redirect_map), \FN (msg_apply_bytes), \FN (msg_cork_bytes), \ -FN (msg_pull_data), +FN (msg_pull_data), \ +FN (bind),/* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call
kernel/bpf/syscall.c +8 -0
@@ -1180,6 +1180,8 @@ bpf_prog_load_check_attach_type(enum bpf_prog_type prog_type,switch (expected_attach_type) {case BPF_CGROUP_INET4_BIND :case BPF_CGROUP_INET6_BIND : +case BPF_CGROUP_INET4_CONNECT : +case BPF_CGROUP_INET6_CONNECT :return 0 ;default :return -EINVAL ;
@@ -1491,6 +1493,8 @@ static int bpf_prog_attach(const union bpf_attr *attr)break ;case BPF_CGROUP_INET4_BIND :case BPF_CGROUP_INET6_BIND : +case BPF_CGROUP_INET4_CONNECT : +case BPF_CGROUP_INET6_CONNECT : ptype =BPF_PROG_TYPE_CGROUP_SOCK_ADDR ;break ;case BPF_CGROUP_SOCK_OPS :
@@ -1557,6 +1561,8 @@ static int bpf_prog_detach(const union bpf_attr *attr)break ;case BPF_CGROUP_INET4_BIND :case BPF_CGROUP_INET6_BIND : +case BPF_CGROUP_INET4_CONNECT : +case BPF_CGROUP_INET6_CONNECT : ptype =BPF_PROG_TYPE_CGROUP_SOCK_ADDR ;break ;case BPF_CGROUP_SOCK_OPS :
@@ -1610,6 +1616,8 @@ static int bpf_prog_query(const union bpf_attr *attr,case BPF_CGROUP_INET_SOCK_CREATE :case BPF_CGROUP_INET4_BIND :case BPF_CGROUP_INET6_BIND : +case BPF_CGROUP_INET4_CONNECT : +case BPF_CGROUP_INET6_CONNECT :case BPF_CGROUP_SOCK_OPS :case BPF_CGROUP_DEVICE :break ;
net/core/filter.c +57 -0
87 lines not on this page · raw message
net/ipv4/af_inet.c +13 -0
@@ -547,12 +547,19 @@ int inet_dgram_connect(struct socket *sock, struct sockaddr *uaddr, int addr_len, int flags) {struct sock *sk = sock->sk; +int err;if (addr_len <sizeof (uaddr->sa_family))return -EINVAL ;if (uaddr->sa_family ==AF_UNSPEC )return sk->sk_prot->disconnect (sk, flags); +if (BPF_CGROUP_PRE_CONNECT_ENABLED (sk)) { + err = sk->sk_prot->pre_connect (sk, uaddr, addr_len); +if (err) +return err; + } +if (!inet_sk (sk)->inet_num &&inet_autobind (sk))return -EAGAIN ;return sk->sk_prot->connect (sk, uaddr, addr_len);
@@ -633,6 +640,12 @@ int __inet_stream_connect(struct socket *sock, struct sockaddr *uaddr,if (sk->sk_state !=TCP_CLOSE ) goto out; +if (BPF_CGROUP_PRE_CONNECT_ENABLED (sk)) { + err = sk->sk_prot->pre_connect (sk, uaddr, addr_len); +if (err) + goto out; + } + err = sk->sk_prot->connect (sk, uaddr, addr_len);if (err <0 ) goto out;
net/ipv4/tcp_ipv4.c +16 -0
@@ -140,6 +140,21 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) }EXPORT_SYMBOL_GPL (tcp_twsk_unique); +static int tcp_v4_pre_connect (struct sock *sk,struct sockaddr *uaddr, +int addr_len) +{ +/* This check is replicated from tcp_v4_connect() and intended to +* prevent BPF program called below from accessing bytes that are out +* of the bound specified by user in addr_len. +*/ +if (addr_len <sizeof (struct sockaddr_in )) +return -EINVAL ; + +sock_owned_by_me (sk); + +return BPF_CGROUP_RUN_PROG_INET4_CONNECT (sk, uaddr); +} +/* This will initiate an outgoing connection. */ int tcp_v4_connect (struct sock *sk,struct sockaddr *uaddr,int addr_len) {
@@ -2409,6 +2424,7 @@ struct proto tcp_prot = { .name = "TCP", .owner = THIS_MODULE, .close = tcp_close, + .pre_connect = tcp_v4_pre_connect, .connect = tcp_v4_connect, .disconnect = tcp_disconnect, .accept = inet_csk_accept,
net/ipv4/udp.c +14 -0
@@ -1658,6 +1658,19 @@ int udp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int noblock, goto try_again; } +int udp_pre_connect (struct sock *sk,struct sockaddr *uaddr,int addr_len) +{ +/* This check is replicated from __ip4_datagram_connect() and +* intended to prevent BPF program called below from accessing bytes +* that are out of the bound specified by user in addr_len. +*/ +if (addr_len <sizeof (struct sockaddr_in )) +return -EINVAL ; + +return BPF_CGROUP_RUN_PROG_INET4_CONNECT_LOCK (sk, uaddr); +} +EXPORT_SYMBOL (udp_pre_connect); +int __udp_disconnect (struct sock *sk,int flags) {struct inet_sock *inet =inet_sk (sk);
@@ -2530,6 +2543,7 @@ struct proto udp_prot = { .name = "UDP", .owner = THIS_MODULE, .close = udp_lib_close, + .pre_connect = udp_pre_connect, .connect = ip4_datagram_connect, .disconnect = udp_disconnect, .ioctl = udp_ioctl,
net/ipv6/af_inet6.c +5 -0
@@ -887,6 +887,10 @@ static const struct ipv6_stub ipv6_stub_impl = { .nd_tbl = &nd_tbl, }; +static const struct ipv6_bpf_stub ipv6_bpf_stub_impl = { + .inet6_bind = __inet6_bind, +}; +static int __init inet6_init (void ) {struct list_head *r;
@@ -1043,6 +1047,7 @@ static int __init inet6_init(void)/* ensure that ipv6 stubs are visible only after ipv6 is ready */ wmb (); ipv6_stub = &ipv6_stub_impl; + ipv6_bpf_stub = &ipv6_bpf_stub_impl; out:return err;
net/ipv6/tcp_ipv6.c +16 -0
@@ -117,6 +117,21 @@ static u32 tcp_v6_init_ts_off(const struct net *net, const struct sk_buff *skb) ipv6_hdr(skb)->saddr.s6_addr32); } +static int tcp_v6_pre_connect (struct sock *sk,struct sockaddr *uaddr, +int addr_len) +{ +/* This check is replicated from tcp_v6_connect() and intended to +* prevent BPF program called below from accessing bytes that are out +* of the bound specified by user in addr_len. +*/ +if (addr_len <SIN6_LEN_RFC2133 ) +return -EINVAL ; + +sock_owned_by_me (sk); + +return BPF_CGROUP_RUN_PROG_INET6_CONNECT (sk, uaddr); +} +static int tcp_v6_connect (struct sock *sk,struct sockaddr *uaddr,int addr_len) {
@@ -1925,6 +1940,7 @@ struct proto tcpv6_prot = { .name = "TCPv6", .owner = THIS_MODULE, .close = tcp_close, + .pre_connect = tcp_v6_pre_connect, .connect = tcp_v6_connect, .disconnect = tcp_disconnect, .accept = inet_csk_accept,
net/ipv6/udp.c +20 -0
@@ -957,6 +957,25 @@ static void udp_v6_flush_pending_frames(struct sock *sk) } } +static int udpv6_pre_connect (struct sock *sk,struct sockaddr *uaddr, +int addr_len) +{ +/* The following checks are replicated from __ip6_datagram_connect() +* and intended to prevent BPF program called below from accessing +* bytes that are out of the bound specified by user in addr_len. +*/ +if (uaddr->sa_family ==AF_INET ) { +if (__ipv6_only_sock (sk)) +return -EAFNOSUPPORT ; +return udp_pre_connect (sk, uaddr, addr_len); + } + +if (addr_len <SIN6_LEN_RFC2133 ) +return -EINVAL ; + +return BPF_CGROUP_RUN_PROG_INET6_CONNECT_LOCK (sk, uaddr); +} +/** * udp6_hwcsum_outgoing - handle outgoing HW checksumming * @sk: socket we are sending on
@@ -1512,6 +1531,7 @@ struct proto udpv6_prot = { .name = "UDPv6", .owner = THIS_MODULE, .close = udp_lib_close, + .pre_connect = udpv6_pre_connect, .connect = ip6_datagram_connect, .disconnect = udp_disconnect, .ioctl = udp_ioctl,
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 7/9 selftests/bpf: Selftest for sys_connect hooks
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT attach types.
Try to connect(2) to specified IP:port and test that:
* remote IP:port pair is overridden;
* local end of connection is bound to specified IP.
All combinations of IPv4/IPv6 and TCP/UDP are tested.
Example:
# tcpdump -pn -i lo -w connect.pcap 2>/dev/null &
[1] 478
# strace -qqf -e connect -o connect.trace ./test_sock_addr.sh
Wait for testing IPv4/IPv6 to become available ... OK
Load bind4 with invalid type (can pollute stderr) ... REJECTED
Load bind4 with valid type ... OK
Attach bind4 with invalid type ... REJECTED
Attach bind4 with valid type ... OK
Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \
program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
0: (b7) r2 = 23569
1: (63) *(u32 *)(r1 +24) = r2
2: (b7) r2 = 16777343
3: (63) *(u32 *)(r1 +4) = r2
invalid bpf_context access off=4 size=4
[ 1518.404609] random: crng init done libbpf: -- END LOG --
libbpf: failed to load program 'cgroup/connect4'
libbpf: failed to load object './connect4_prog.o' ... REJECTED
Load connect4 with valid type ... OK Attach connect4 with invalid type ... REJECTED Attach connect4 with valid type ... OK Test case #1 (IPv4/TCP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Requested: connect(192.168.1.254, 4040) from (*, *) ..
Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068)
Test case #2 (IPv4/UDP):
Requested: bind(192.168.1.254, 4040) ..
Actual: bind(127.0.0.1, 4444)
Requested: connect(192.168.1.254, 4040) from (*, *) ..
Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447) Load bind6 with invalid type (can pollute stderr) ... REJECTED Load bind6 with valid type ... OK
Attach bind6 with invalid type ... REJECTED
Attach bind6 with valid type ... OK
Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \
program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
0: (b7) r6 = 0
1: (63) *(u32 *)(r1 +12) = r6
invalid bpf_context access off=12 size=4
libbpf: -- END LOG --
libbpf: failed to load program 'cgroup/connect6'
libbpf: failed to load object './connect6_prog.o' ... REJECTED
Load connect6 with valid type ... OK Attach connect6 with invalid type ... REJECTED Attach connect6 with valid type ... OK Test case #3 (IPv6/TCP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
Actual: connect(::1, 6666) from (::6, 37458)
Test case #4 (IPv6/UDP):
Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
Actual: bind(::1, 6666)
Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
Actual: connect(::1, 6666) from (::6, 39315)
### SUCCESS
# egrep 'connect\(.*AF_INET' connect.trace | \Quoted 1 line
egrep -vw 'htons\(1025\)' | fold -b -s -w 72
502 connect(7, {sa_family=AF_INET, sin_port=htons(4040),
sin_addr=inet_addr("192.168.1.254")}, 128) = 0
502 connect(8, {sa_family=AF_INET, sin_port=htons(4040),
sin_addr=inet_addr("192.168.1.254")}, 128) = 0
502 connect(9, {sa_family=AF_INET6, sin6_port=htons(6060),
inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
502 connect(10, {sa_family=AF_INET6, sin6_port=htons(6060),
inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
# fg tcpdump -pn -i lo -w connect.pcap 2> /dev/null # tcpdump -r connect.pcap -n tcp | cut -c 1-72 reading from file connect.pcap, link-type EN10MB (Ethernet) 17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333 17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112 17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w 17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1, 17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win 17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac 17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt 17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win
--- tools/include/uapi/linux/bpf.h | 12 ++- tools/lib/bpf/libbpf.c | 2 + tools/testing/selftests/bpf/Makefile | 5 +- tools/testing/selftests/bpf/bpf_helpers.h | 2 + tools/testing/selftests/bpf/connect4_prog.c | 45 +++++++++++ tools/testing/selftests/bpf/connect6_prog.c | 61 +++++++++++++++ tools/testing/selftests/bpf/test_sock_addr.c | 104 +++++++++++++++++++++++++- tools/testing/selftests/bpf/test_sock_addr.sh | 57 ++++++++++++++ 8 files changed, 284 insertions(+), 4 deletions(-) create mode 100644 tools/testing/selftests/bpf/connect4_prog.c create mode 100644 tools/testing/selftests/bpf/connect6_prog.c create mode 100755 tools/testing/selftests/bpf/test_sock_addr.sh
tools/include/uapi/linux/bpf.h +11 -1
@@ -150,6 +150,8 @@ enum bpf_attach_type {BPF_SK_MSG_VERDICT ,BPF_CGROUP_INET4_BIND ,BPF_CGROUP_INET6_BIND , +BPF_CGROUP_INET4_CONNECT , +BPF_CGROUP_INET6_CONNECT , __MAX_BPF_ATTACH_TYPE };
@@ -744,6 +746,13 @@ union bpf_attr {* @flags: reserved for future use * Return: SK_PASS * +* int bpf_bind(ctx, addr, addr_len) +* Bind socket to address. Only binding to IP is supported, no port can be +* set in addr. +* @ctx: pointer to context of type bpf_sock_addr +* @addr: pointer to struct sockaddr to bind socket to +* @addr_len: length of sockaddr structure +* Return: 0 on success or negative error code */ #define __BPF_FUNC_MAPPER (FN ) \ FN(unspec), \
@@ -809,7 +818,8 @@ union bpf_attr {FN (msg_redirect_map), \FN (msg_apply_bytes), \FN (msg_cork_bytes), \ -FN (msg_pull_data), +FN (msg_pull_data), \ +FN (bind),/* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call
tools/lib/bpf/libbpf.c +2 -0
@@ -1887,6 +1887,8 @@ static const struct {BPF_PROG_SEC ("sk_msg" ,BPF_PROG_TYPE_SK_MSG ),BPF_SA_PROG_SEC ("cgroup/bind4" ,BPF_CGROUP_INET4_BIND ),BPF_SA_PROG_SEC ("cgroup/bind6" ,BPF_CGROUP_INET6_BIND ), +BPF_SA_PROG_SEC ("cgroup/connect4" ,BPF_CGROUP_INET4_CONNECT ), + BPF_SA_PROG_SEC("cgroup/connect6", BPF_CGROUP_INET6_CONNECT), };#undef BPF_PROG_SEC
tools/testing/selftests/bpf/Makefile +3 -2
@@ -30,14 +30,15 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test sockmap_verdict_prog.o dev_cgroup.o sample_ret0.o test_tracepoint.o \ test_l4lb_noinline.o test_xdp_noinline.o test_stacktrace_map.o \ sample_map_ret0.o test_tcpbpf_kern.o test_stacktrace_build_id.o \ - sockmap_tcp_msg_prog.o + sockmap_tcp_msg_prog.o connect4_prog.o connect6_prog.o # Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \ test_libbpf.sh \ test_xdp_redirect.sh \ test_xdp_meta.sh \ - test_offload.py + test_offload.py \ + test_sock_addr.sh # Compile but not part of 'make run_tests' TEST_GEN_PROGS_EXTENDED = test_libbpf_open
tools/testing/selftests/bpf/bpf_helpers.h +2 -0
@@ -94,6 +94,8 @@ static int (*bpf_msg_cork_bytes)(void *ctx, int len) = (void *) BPF_FUNC_msg_cork_bytes;static int (*bpf_msg_pull_data)(void *ctx,int start,int end,int flags) = (void *) BPF_FUNC_msg_pull_data; +static int (*bpf_bind)(void *ctx,void *addr,int addr_len) = + (void *) BPF_FUNC_bind;/* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions
tools/testing/selftests/bpf/connect4_prog.c new file +45 -0
45 lines not on this page · raw message
tools/testing/selftests/bpf/connect6_prog.c new file +61 -0
61 lines not on this page · raw message
tools/testing/selftests/bpf/test_sock_addr.c +103 -1
183 lines not on this page · raw message
tools/testing/selftests/bpf/test_sock_addr.sh new file +57 -0
57 lines not on this page · raw message
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 8/9 bpf: Post-hooks for sys_bind
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
"Post-hooks" are hooks that are called right before returning from sys_bind. At this time IP and port are already allocated and no further changes to struct sock can happen before returning from sys_bind but BPF program has a chance to inspect the socket and change sys_bind result.
Specifically it can e.g. inspect what port was allocated and if it doesn't satisfy some policy, BPF program can force sys_bind to fail and return EPERM to user.
Another example of usage is recording the IP:port pair to some map to use it in later calls to sys_connect. E.g. if some TCP server inside cgroup was bound to some IP:port_n, it can be recorded to a map. And later when some TCP client inside same cgroup is trying to connect to 127.0.0.1:port_n, BPF hook for sys_connect can override the destination and connect application to IP:port_n instead of 127.0.0.1:port_n. That helps forcing all applications inside a cgroup to use desired IP and not break those applications if they e.g. use localhost to communicate between each other.
== Implementation details ==
Post-hooks are implemented as two new attach types BPF_CGROUP_INET4_POST_BIND and BPF_CGROUP_INET6_POST_BIND for existing prog type BPF_PROG_TYPE_CGROUP_SOCK.
Separate attach types for IPv4 and IPv6 are introduced to avoid access to IPv6 field in struct sock from inet_bind() and to IPv4 field from inet6_bind() since those fields might not make sense in such cases.
--- include/linux/bpf-cgroup.h | 16 +++++-- include/uapi/linux/bpf.h | 11 +++++ kernel/bpf/syscall.c | 43 +++++++++++++++++ net/core/filter.c | 116 +++++++++++++++++++++++++++++++++++++++------ net/ipv4/af_inet.c | 18 ++++--- net/ipv6/af_inet6.c | 21 +++++--- 6 files changed, 195 insertions(+), 30 deletions(-)
include/linux/bpf-cgroup.h +13 -3
@@ -98,16 +98,24 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor, __ret; \ }) -#define BPF_CGROUP_RUN_PROG_INET_SOCK (sk) \ +#define BPF_CGROUP_RUN_SK_PROG (sk, type) \ ({ \ int __ret = 0; \ if (cgroup_bpf_enabled) { \ - __ret = __cgroup_bpf_run_filter_sk(sk, \ - BPF_CGROUP_INET_SOCK_CREATE); \ + __ret = __cgroup_bpf_run_filter_sk(sk, type); \ } \ __ret; \ }) +#define BPF_CGROUP_RUN_PROG_INET_SOCK (sk) \ + BPF_CGROUP_RUN_SK_PROG(sk, BPF_CGROUP_INET_SOCK_CREATE) + +#define BPF_CGROUP_RUN_PROG_INET4_POST_BIND (sk) \ + BPF_CGROUP_RUN_SK_PROG(sk, BPF_CGROUP_INET4_POST_BIND) + +#define BPF_CGROUP_RUN_PROG_INET6_POST_BIND (sk) \ + BPF_CGROUP_RUN_SK_PROG(sk, BPF_CGROUP_INET6_POST_BIND) +#define BPF_CGROUP_RUN_SA_PROG (sk, uaddr, type) \ ({ \ int __ret = 0; \
@@ -183,6 +191,8 @@ static inline int cgroup_bpf_inherit(struct cgroup *cgrp) { return 0; }#define BPF_CGROUP_RUN_PROG_INET_SOCK (sk) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET4_BIND (sk, uaddr) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET6_BIND (sk, uaddr) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET4_POST_BIND (sk) ({ 0; }) +#define BPF_CGROUP_RUN_PROG_INET6_POST_BIND (sk) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET4_CONNECT (sk, uaddr) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET4_CONNECT_LOCK (sk, uaddr) ({ 0; })#define BPF_CGROUP_RUN_PROG_INET6_CONNECT (sk, uaddr) ({ 0; })
include/uapi/linux/bpf.h +11 -0
@@ -152,6 +152,8 @@ enum bpf_attach_type {BPF_CGROUP_INET6_BIND ,BPF_CGROUP_INET4_CONNECT ,BPF_CGROUP_INET6_CONNECT , +BPF_CGROUP_INET4_POST_BIND , +BPF_CGROUP_INET6_POST_BIND , __MAX_BPF_ATTACH_TYPE };
@@ -948,6 +950,15 @@ struct bpf_sock {__u32 protocol;__u32 mark;__u32 priority; +__u32 src_ip4;/* Allows 1,2,4-byte read. +* Stored in network byte order. +*/ +__u32 src_ip6[4 ];/* Allows 1,2,4-byte read. +* Stored in network byte order. +*/ +__u32 src_port;/* Allows 4-byte read. +* Stored in host byte order +*/ };#define XDP_PACKET_HEADROOM 256
kernel/bpf/syscall.c +43 -0
84 lines not on this page · raw message
net/core/filter.c +102 -14
144 lines not on this page · raw message
net/ipv4/af_inet.c +12 -6
@@ -519,12 +519,18 @@ int __inet_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len, inet->inet_saddr =0 ;/* Use device */ /* Make sure we are allowed to bind here. */ -if ((snum || !(inet->bind_address_no_port || - force_bind_address_no_port)) && - sk->sk_prot->get_port (sk, snum)) { - inet->inet_saddr = inet->inet_rcv_saddr =0 ; - err = -EADDRINUSE ; - goto out_release_sock; +if (snum || !(inet->bind_address_no_port || + force_bind_address_no_port)) { +if (sk->sk_prot->get_port (sk, snum)) { + inet->inet_saddr = inet->inet_rcv_saddr =0 ; + err = -EADDRINUSE ; + goto out_release_sock; + } + err =BPF_CGROUP_RUN_PROG_INET4_POST_BIND (sk); +if (err) { + inet->inet_saddr = inet->inet_rcv_saddr =0 ; + goto out_release_sock; + } }if (inet->inet_rcv_saddr)
net/ipv6/af_inet6.c +14 -7
@@ -412,13 +412,20 @@ int __inet6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len, sk->sk_ipv6only =1 ;/* Make sure we are allowed to bind here. */ -if ((snum || !(inet->bind_address_no_port || - force_bind_address_no_port)) && - sk->sk_prot->get_port (sk, snum)) { - sk->sk_ipv6only = saved_ipv6only; -inet_reset_saddr (sk); - err = -EADDRINUSE ; - goto out; +if (snum || !(inet->bind_address_no_port || + force_bind_address_no_port)) { +if (sk->sk_prot->get_port (sk, snum)) { + sk->sk_ipv6only = saved_ipv6only; +inet_reset_saddr (sk); + err = -EADDRINUSE ; + goto out; + } + err =BPF_CGROUP_RUN_PROG_INET6_POST_BIND (sk); +if (err) { + sk->sk_ipv6only = saved_ipv6only; +inet_reset_saddr (sk); + goto out; + } }if (addr_type !=IPV6_ADDR_ANY )
Signature · 1 line
2.9.5
Alexei Starovoitov
maintainerPATCH v3 9/9 selftests/bpf: Selftest for sys_bind post-hooks.
In reply to Alexei StarovoitovFrom: Andrey Ignatov <[email protected]>
Add selftest for attach types BPF_CGROUP_INET4_POST_BIND and BPF_CGROUP_INET6_POST_BIND.
The main things tested are:
* prog load behaves as expected (valid/invalid accesses in prog);
* prog attach behaves as expected (load- vs attach-time attach types);
* BPF_CGROUP_INET_SOCK_CREATE can be attached in a backward compatible way;
* post-hooks return expected result and errno.
Example:
# ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [PASS] Test case: sock_create load w/ expected_attach_type .. [PASS] Test case: attach type mismatch bind4 vs bind6 .. [PASS] Test case: attach type mismatch bind6 vs bind4 .. [PASS] Test case: attach type mismatch default vs bind4 .. [PASS] Test case: attach type mismatch bind6 vs sock_create .. [PASS] Test case: bind4 reject all .. [PASS] Test case: bind6 reject all .. [PASS] Test case: bind6 deny specific IP & port .. [PASS] Test case: bind4 allow specific IP & port .. [PASS] Test case: bind4 allow all .. [PASS] Test case: bind6 allow all .. [PASS] Summary: 16 PASSED, 0 FAILED
--- tools/include/uapi/linux/bpf.h | 11 + tools/testing/selftests/bpf/Makefile | 4 +- tools/testing/selftests/bpf/test_sock.c | 479 ++++++++++++++++++++++++++++++++ 3 files changed, 493 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/bpf/test_sock.c
tools/include/uapi/linux/bpf.h +11 -0
@@ -152,6 +152,8 @@ enum bpf_attach_type {BPF_CGROUP_INET6_BIND ,BPF_CGROUP_INET4_CONNECT ,BPF_CGROUP_INET6_CONNECT , +BPF_CGROUP_INET4_POST_BIND , +BPF_CGROUP_INET6_POST_BIND , __MAX_BPF_ATTACH_TYPE };
@@ -947,6 +949,15 @@ struct bpf_sock {__u32 protocol;__u32 mark;__u32 priority; +__u32 src_ip4;/* Allows 1,2,4-byte read. +* Stored in network byte order. +*/ +__u32 src_ip6[4 ];/* Allows 1,2,4-byte read. +* Stored in network byte order. +*/ +__u32 src_port;/* Allows 4-byte read. +* Stored in host byte order +*/ };#define XDP_PACKET_HEADROOM 256
tools/testing/selftests/bpf/Makefile +3 -1
@@ -23,7 +23,8 @@ urandom_read: urandom_read.c # Order correspond to 'make run_tests' order TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \ - test_align test_verifier_log test_dev_cgroup test_tcpbpf_user test_sock_addr + test_align test_verifier_log test_dev_cgroup test_tcpbpf_user \ + test_sock test_sock_addr TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \ test_pkt_md_access.o test_xdp_redirect.o test_xdp_meta.o sockmap_parse_prog.o \
@@ -52,6 +53,7 @@ $(TEST_GEN_PROGS): $(BPFOBJ) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/libbpf.a $(OUTPUT)/test_dev_cgroup: cgroup_helpers.c +$(OUTPUT)/test_sock: cgroup_helpers.c $(OUTPUT)/test_sock_addr: cgroup_helpers.c .PHONY: force
tools/testing/selftests/bpf/test_sock.c new file +479 -0
479 lines not on this page · raw message
Signature · 1 line
2.9.5
Quoted 4 lines · Alexei Starovoitov
v2->v3:
- rebase due to conflicts
- fix ipv6=m build
Quoted 10 lines
v1->v2:
- supportexpected_attach_typeat prog load time so that prog (incl. context accesses and calls to helpers) can be validated with regard to specific attach point it is supposed to be attached to. Later, at attach time, attach type is checked so that it must be same as at load time if it was provided
- reworked hooks to rely onexpected_attach_type, and reduced number of new prog types from 6 to just 1:BPF_PROG_TYPE_CGROUP_SOCK_ADDR
- reusedBPF_PROG_TYPE_CGROUP_SOCKforsys_bindpost-hooks
- add selftests for post-sys_bind hook
[...]
Applied to bpf-next, thanks everyone!