hostapd: driver selection options
cover hostapd: driver selection options
Below is the list of patches for hostapd to give user more control on which drivers to include in the build. As a byproduct, we can drop dependencies on netlink and threads if the drivers and options selected do not require them.
Alexander Mukhin (3):
hostapd: select driver support
hostapd: make ACS dependent on nl80211
hostapd: drop default dependency on netlink
package/hostapd/Config.in | 52 +++++++++++++++++++++++++++++++++++----- package/hostapd/hostapd.mk | 59 +++++++++++++++++++++++++++++++++------------- 2 files changed, 88 insertions(+), 23 deletions(-)
Signature · 1 line
2.11.0
PATCH 1/3 hostapd: select driver support
Add support for the wired driver. Add configuration options to select which drivers to build. Select DRIVER_NONE if no other drivers enabled (this may be the case when building hostapd as a standalone RADIUS server).
Update makefile logic and apply wireless-specific options only if at least one wireless driver enabled. Otherwise, an attempt to build a wired-only or RADIUS-only hostapd will fail.
--- package/hostapd/Config.in | 31 +++++++++++++++++++++++++++++++ package/hostapd/hostapd.mk | 31 ++++++++++++++++++++++++++----- 2 files changed, 57 insertions(+), 5 deletions(-)
package/hostapd/Config.in +31 -0
@@ -14,11 +14,42 @@ config BR2_PACKAGE_HOSTAPD if BR2_PACKAGE_HOSTAPD +config BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP + bool "Enable hostap driver" + default y + select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS + help + Enable support for Host AP driver. + +config BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 + bool "Enable nl80211 driver" + default y + select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS + help + Enable support for drivers using the nl80211 kernel interface. + config BR2_PACKAGE_HOSTAPD_DRIVER_RTW bool "Enable rtl871xdrv driver" + select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS help Enable support for Realtek wireless chips. +config BR2_PACKAGE_HOSTAPD_DRIVER_WIRED + bool "Enable wired driver" + help + Enable support for wired authenticator. + +config BR2_PACKAGE_HOSTAPD_DRIVER_NONE + bool + default y + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_RTW + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_WIRED + +config BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS + bool + config BR2_PACKAGE_HOSTAPD_ACS bool "Enable ACS" default y
package/hostapd/hostapd.mk +26 -5
@@ -18,12 +18,7 @@ HOSTAPD_LICENSE_FILES = README HOSTAPD_CONFIG_SET = HOSTAPD_CONFIG_ENABLE = \ - CONFIG_HS20 \ - CONFIG_IEEE80211AC \ - CONFIG_IEEE80211N \ - CONFIG_IEEE80211R \ CONFIG_INTERNAL_LIBTOMMATH \ - CONFIG_INTERWORKING \ CONFIG_LIBNL32 HOSTAPD_CONFIG_DISABLE =
@@ -45,11 +40,37 @@ HOSTAPD_CONFIG_DISABLE += CONFIG_EAP_PWD HOSTAPD_CONFIG_EDITS += 's/\#\(CONFIG_TLS=\).*/\1internal/' endif +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP),) +HOSTAPD_CONFIG_DISABLE += CONFIG_DRIVER_HOSTAP +endif + +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_NL80211),) +HOSTAPD_CONFIG_DISABLE += CONFIG_DRIVER_NL80211 +endif + ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_RTW),y) HOSTAPD_PATCH += https://github.com/pritambaral/hostapd-rtl871xdrv/raw/master/rtlxdrv.patch HOSTAPD_CONFIG_SET += CONFIG_DRIVER_RTW endif +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_WIRED),y) +HOSTAPD_CONFIG_ENABLE += CONFIG_DRIVER_WIRED +endif + +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_NONE),y) +HOSTAPD_CONFIG_ENABLE += CONFIG_DRIVER_NONE +endif + +# Add options for wireless drivers +ifeq ($(BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS),y) +HOSTAPD_CONFIG_ENABLE += \ + CONFIG_HS20 \ + CONFIG_IEEE80211AC \ + CONFIG_IEEE80211N \ + CONFIG_IEEE80211R \ + CONFIG_INTERWORKING +endif + ifeq ($(BR2_PACKAGE_HOSTAPD_ACS),y) HOSTAPD_CONFIG_ENABLE += CONFIG_ACS endif
Signature · 1 line
2.11.0
PATCH 1/3 hostapd: select driver support
+Sam
PATCH 1/3 hostapd: select driver support
In reply to Alexander MukhinQuoted 10 lines · Alexander Mukhin
Add support for the wired driver. Add configuration options to select which drivers to build. Select
DRIVER_NONEif no other drivers enabled (this may be the case when building hostapd as a standalone RADIUS server).Update makefile logic and apply wireless-specific options only if at least one wireless driver enabled. Otherwise, an attempt to build a wired-only or RADIUS-only hostapd will fail.
Signed-off-by Alexander Mukhin <[email protected]>
Quoted 114 lines
--- package/hostapd/Config.in | 31 +++++++++++++++++++++++++++++++ package/hostapd/hostapd.mk | 31 ++++++++++++++++++++++++++----- 2 files changed, 57 insertions(+), 5 deletions(-)package/hostapd/Config.in +31
-0@@ -14,11 +14,42 @@ config BR2_PACKAGE_HOSTAPD if BR2_PACKAGE_HOSTAPD +config BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP + bool "Enable hostap driver" + default y + select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS + help + Enable support for Host AP driver. + +config BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 + bool "Enable nl80211 driver" + default y + select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS + help + Enable support for drivers using the nl80211 kernel interface. + config BR2_PACKAGE_HOSTAPD_DRIVER_RTW bool "Enable rtl871xdrv driver" + select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS help Enable support for Realtek wireless chips. +config BR2_PACKAGE_HOSTAPD_DRIVER_WIRED + bool "Enable wired driver" + help + Enable support for wired authenticator. + +config BR2_PACKAGE_HOSTAPD_DRIVER_NONE + bool + default y + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_RTW + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_WIRED + +config BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS + bool + config BR2_PACKAGE_HOSTAPD_ACS bool "Enable ACS" default ypackage/hostapd/hostapd.mk +26
-6@@ -18,12 +18,7 @@ HOSTAPD_LICENSE_FILES = README HOSTAPD_CONFIG_SET = HOSTAPD_CONFIG_ENABLE = \ - CONFIG_HS20 \ - CONFIG_IEEE80211AC \ - CONFIG_IEEE80211N \ - CONFIG_IEEE80211R \ CONFIG_INTERNAL_LIBTOMMATH \ - CONFIG_INTERWORKING \ CONFIG_LIBNL32 HOSTAPD_CONFIG_DISABLE =@@ -45,11 +40,37 @@ HOSTAPD_CONFIG_DISABLE += CONFIG_EAP_PWD HOSTAPD_CONFIG_EDITS += 's/\#\(CONFIG_TLS=\).*/\1internal/' endif +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP),) +HOSTAPD_CONFIG_DISABLE += CONFIG_DRIVER_HOSTAP +endif + +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_NL80211),) +HOSTAPD_CONFIG_DISABLE += CONFIG_DRIVER_NL80211 +endif + ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_RTW),y) HOSTAPD_PATCH += https://github.com/pritambaral/hostapd-rtl871xdrv/raw/master/rtlxdrv.patch HOSTAPD_CONFIG_SET += CONFIG_DRIVER_RTW endif +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_WIRED),y) +HOSTAPD_CONFIG_ENABLE += CONFIG_DRIVER_WIRED +endif + +ifeq ($(BR2_PACKAGE_HOSTAPD_DRIVER_NONE),y) +HOSTAPD_CONFIG_ENABLE += CONFIG_DRIVER_NONE +endif + +# Add options for wireless drivers +ifeq ($(BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS),y) +HOSTAPD_CONFIG_ENABLE += \ + CONFIG_HS20 \ + CONFIG_IEEE80211AC \ + CONFIG_IEEE80211N \ + CONFIG_IEEE80211R \ + CONFIG_INTERWORKING +endif + ifeq ($(BR2_PACKAGE_HOSTAPD_ACS),y) HOSTAPD_CONFIG_ENABLE += CONFIG_ACS endif --2.11.0
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 2/3 hostapd: make ACS dependent on nl80211
In reply to Alexander MukhinAccording to hostapd's defconfig file, ACS is currently only supported through the nl80211 driver. Search through the source code also confirms that ACS machinery is present in the nl80211 driver only.
Although hostapd can be built with ACS enabled and nl80211 disabled, an attempt to use ACS with other drivers by setting a wireless channel to 0 results in a runtime failure (driver doesn't accept this value). So we might save a user from selecting a meaningless combination by making ACS dependent on nl80211.
--- package/hostapd/Config.in | 4 ++++ 1 file changed, 4 insertions(+)
package/hostapd/Config.in +4 -0
@@ -53,6 +53,7 @@ config BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS config BR2_PACKAGE_HOSTAPD_ACS bool "Enable ACS" default y + depends on BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 help Enable support for standard ACS (Automatic Channel Selection). Some propietary drivers use a custom algorithm which requires
@@ -60,6 +61,9 @@ config BR2_PACKAGE_HOSTAPD_ACS causing hostapd to use the standard one which doesn't work for those cases. +comment "ACS is currently only supported through the nl80211 driver" + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 + config BR2_PACKAGE_HOSTAPD_EAP bool "Enable EAP" depends on !BR2_STATIC_LIBS
Signature · 1 line
2.11.0
PATCH 2/3 hostapd: make ACS dependent on nl80211
+Sam
Quoted 11 lines · Alexander Mukhin
According to hostapd's defconfig file, ACS is currently only supported through the nl80211 driver. Search through the source code also confirms that ACS machinery is present in the nl80211 driver only.
Although hostapd can be built with ACS enabled and nl80211 disabled, an attempt to use ACS with other drivers by setting a wireless channel to 0 results in a runtime failure (driver doesn't accept this value). So we might save a user from selecting a meaningless combination by making ACS dependent on nl80211.
Signed-off-by Alexander Mukhin <[email protected]>
Bryce Ferguson
Software Engineer
Airborne Information Solutions \ RC Linux Platform
400 Collins Rd NE Cedar Rapids, Iowa 52498
Bryce.Ferguson at rockwellcollins.com
PATCH 2/3 hostapd: make ACS dependent on nl80211
In reply to Alexander MukhinQuoted 11 lines · Alexander Mukhin
According to hostapd's defconfig file, ACS is currently only supported through the nl80211 driver. Search through the source code also confirms that ACS machinery is present in the nl80211 driver only.
Although hostapd can be built with ACS enabled and nl80211 disabled, an attempt to use ACS with other drivers by setting a wireless channel to 0 results in a runtime failure (driver doesn't accept this value). So we might save a user from selecting a meaningless combination by making ACS dependent on nl80211.
Signed-off-by Alexander Mukhin <[email protected]>
Quoted 33 lines
--- package/hostapd/Config.in | 4 ++++ 1 file changed, 4 insertions(+)package/hostapd/Config.in +4
-1@@ -53,6 +53,7 @@ config BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS config BR2_PACKAGE_HOSTAPD_ACS bool "Enable ACS" default y + depends on BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 help Enable support for standard ACS (Automatic Channel Selection). Some propietary drivers use a custom algorithm which requires@@ -60,6 +61,9 @@ config BR2_PACKAGE_HOSTAPD_ACS causing hostapd to use the standard one which doesn't work for those cases. +comment "ACS is currently only supported through the nl80211 driver" + depends on !BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 + config BR2_PACKAGE_HOSTAPD_EAP bool "Enable EAP" depends on !BR2_STATIC_LIBS --2.11.0
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 3/3 hostapd: drop default dependency on netlink
In reply to Alexander MukhinGet rid of netlink dependency if the options selected allow that.
--- package/hostapd/Config.in | 17 +++++++++++------ package/hostapd/hostapd.mk | 28 ++++++++++++++++------------ 2 files changed, 27 insertions(+), 18 deletions(-)
package/hostapd/Config.in +11 -6
@@ -1,8 +1,6 @@ config BR2_PACKAGE_HOSTAPD bool "hostapd" - depends on BR2_TOOLCHAIN_HAS_THREADS # libnl depends on BR2_USE_MMU # fork() - select BR2_PACKAGE_LIBNL help User space daemon for wireless access points.
@@ -24,10 +22,15 @@ config BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP config BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 bool "Enable nl80211 driver" default y + depends on BR2_TOOLCHAIN_HAS_THREADS # libnl + select BR2_PACKAGE_LIBNL select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS help Enable support for drivers using the nl80211 kernel interface. +comment "nl80211 driver needs a toolchain w/ threads" + depends on !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_HOSTAPD_DRIVER_RTW bool "Enable rtl871xdrv driver" select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS
@@ -97,12 +100,14 @@ config BR2_PACKAGE_HOSTAPD_VLAN_NETLINK bool "Use netlink-based API for VLAN operations" default y depends on BR2_PACKAGE_HOSTAPD_VLAN + depends on BR2_TOOLCHAIN_HAS_THREADS # libnl + select BR2_PACKAGE_LIBNL help Use netlink-based kernel API for VLAN operations instead of ioctl(). -endif - -comment "hostapd needs a toolchain w/ threads" +comment "netlink-based VLAN support needs a toolchain w/ threads" + depends on BR2_PACKAGE_HOSTAPD_VLAN depends on !BR2_TOOLCHAIN_HAS_THREADS - depends on BR2_USE_MMU + +endif
package/hostapd/hostapd.mk +16 -12
@@ -11,25 +11,16 @@ HOSTAPD_PATCH = \ http://w1.fi/security/2017-1/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch HOSTAPD_SUBDIR = hostapd HOSTAPD_CONFIG = $(HOSTAPD_DIR)/$(HOSTAPD_SUBDIR)/.config -HOSTAPD_DEPENDENCIES = host-pkgconf libnl -HOSTAPD_CFLAGS = $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include/libnl3/ +HOSTAPD_DEPENDENCIES = host-pkgconf +HOSTAPD_CFLAGS = $(TARGET_CFLAGS) HOSTAPD_LICENSE = BSD-3-Clause HOSTAPD_LICENSE_FILES = README HOSTAPD_CONFIG_SET = -HOSTAPD_CONFIG_ENABLE = \ - CONFIG_INTERNAL_LIBTOMMATH \ - CONFIG_LIBNL32 +HOSTAPD_CONFIG_ENABLE = CONFIG_INTERNAL_LIBTOMMATH HOSTAPD_CONFIG_DISABLE = -# libnl-3 needs -lm (for rint) and -lpthread if linking statically -# And library order matters hence stick -lnl-3 first since it's appended -# in the hostapd Makefiles as in LIBS+=-lnl-3 ... thus failing -ifeq ($(BR2_STATIC_LIBS),y) -HOSTAPD_LIBS += -lnl-3 -lm -lpthread -endif - # Try to use openssl if it's already available ifeq ($(BR2_PACKAGE_LIBOPENSSL),y) HOSTAPD_DEPENDENCIES += libopenssl
@@ -105,6 +96,19 @@ ifeq ($(BR2_PACKAGE_HOSTAPD_VLAN_NETLINK),y) HOSTAPD_CONFIG_ENABLE += CONFIG_VLAN_NETLINK endif +# Options for building with libnl +ifeq ($(BR2_PACKAGE_LIBNL),y) +HOSTAPD_DEPENDENCIES += libnl +HOSTAPD_CFLAGS += -I$(STAGING_DIR)/usr/include/libnl3/ +HOSTAPD_CONFIG_ENABLE += CONFIG_LIBNL32 +# libnl-3 needs -lm (for rint) and -lpthread if linking statically +# And library order matters hence stick -lnl-3 first since it's appended +# in the hostapd Makefiles as in LIBS+=-lnl-3 ... thus failing +ifeq ($(BR2_STATIC_LIBS),y) +HOSTAPD_LIBS += -lnl-3 -lm -lpthread +endif +endif + define HOSTAPD_CONFIGURE_CMDS cp $(@D)/hostapd/defconfig $(HOSTAPD_CONFIG) sed -i $(patsubst %,-e 's/^#\(%\)/\1/',$(HOSTAPD_CONFIG_ENABLE)) \
Signature · 1 line
2.11.0
PATCH 3/3 hostapd: drop default dependency on netlink
Quoted 3 lines · Alexander Mukhin
Get rid of netlink dependency if the options selected allow that.
Signed-off-by Alexander Mukhin <[email protected]>
Quoted 113 lines
--- package/hostapd/Config.in | 17 +++++++++++------ package/hostapd/hostapd.mk | 28 ++++++++++++++++------------ 2 files changed, 27 insertions(+), 18 deletions(-)package/hostapd/Config.in +11
-6@@ -1,8 +1,6 @@ config BR2_PACKAGE_HOSTAPD bool "hostapd" - depends on BR2_TOOLCHAIN_HAS_THREADS # libnl depends on BR2_USE_MMU # fork() - select BR2_PACKAGE_LIBNL help User space daemon for wireless access points.@@ -24,10 +22,15 @@ config BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP config BR2_PACKAGE_HOSTAPD_DRIVER_NL80211 bool "Enable nl80211 driver" default y + depends on BR2_TOOLCHAIN_HAS_THREADS # libnl + select BR2_PACKAGE_LIBNL select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS help Enable support for drivers using the nl80211 kernel interface. +comment "nl80211 driver needs a toolchain w/ threads" + depends on !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_HOSTAPD_DRIVER_RTW bool "Enable rtl871xdrv driver" select BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS@@ -97,12 +100,14 @@ config BR2_PACKAGE_HOSTAPD_VLAN_NETLINK bool "Use netlink-based API for VLAN operations" default y depends on BR2_PACKAGE_HOSTAPD_VLAN + depends on BR2_TOOLCHAIN_HAS_THREADS # libnl + select BR2_PACKAGE_LIBNL help Use netlink-based kernel API for VLAN operations instead of ioctl(). -endif - -comment "hostapd needs a toolchain w/ threads" +comment "netlink-based VLAN support needs a toolchain w/ threads" + depends on BR2_PACKAGE_HOSTAPD_VLAN depends on !BR2_TOOLCHAIN_HAS_THREADS - depends on BR2_USE_MMU + +endifpackage/hostapd/hostapd.mk +16
-13@@ -11,25 +11,16 @@ HOSTAPD_PATCH = \ http://w1.fi/security/2017-1/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch HOSTAPD_SUBDIR = hostapd HOSTAPD_CONFIG = $(HOSTAPD_DIR)/$(HOSTAPD_SUBDIR)/.config -HOSTAPD_DEPENDENCIES = host-pkgconf libnl -HOSTAPD_CFLAGS = $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include/libnl3/ +HOSTAPD_DEPENDENCIES = host-pkgconf +HOSTAPD_CFLAGS = $(TARGET_CFLAGS) HOSTAPD_LICENSE = BSD-3-Clause HOSTAPD_LICENSE_FILES = README HOSTAPD_CONFIG_SET = -HOSTAPD_CONFIG_ENABLE = \ - CONFIG_INTERNAL_LIBTOMMATH \ - CONFIG_LIBNL32 +HOSTAPD_CONFIG_ENABLE = CONFIG_INTERNAL_LIBTOMMATH HOSTAPD_CONFIG_DISABLE = -# libnl-3 needs -lm (for rint) and -lpthread if linking statically -# And library order matters hence stick -lnl-3 first since it's appended -# in the hostapd Makefiles as in LIBS+=-lnl-3 ... thus failing -ifeq ($(BR2_STATIC_LIBS),y) -HOSTAPD_LIBS += -lnl-3 -lm -lpthread -endif - # Try to use openssl if it's already available ifeq ($(BR2_PACKAGE_LIBOPENSSL),y) HOSTAPD_DEPENDENCIES += libopenssl@@ -105,6 +96,19 @@ ifeq ($(BR2_PACKAGE_HOSTAPD_VLAN_NETLINK),y) HOSTAPD_CONFIG_ENABLE += CONFIG_VLAN_NETLINK endif +# Options for building with libnl +ifeq ($(BR2_PACKAGE_LIBNL),y) +HOSTAPD_DEPENDENCIES += libnl +HOSTAPD_CFLAGS += -I$(STAGING_DIR)/usr/include/libnl3/ +HOSTAPD_CONFIG_ENABLE += CONFIG_LIBNL32 +# libnl-3 needs -lm (for rint) and -lpthread if linking statically +# And library order matters hence stick -lnl-3 first since it's appended +# in the hostapd Makefiles as in LIBS+=-lnl-3 ... thus failing +ifeq ($(BR2_STATIC_LIBS),y) +HOSTAPD_LIBS += -lnl-3 -lm -lpthread +endif +endif + define HOSTAPD_CONFIGURE_CMDS cp $(@D)/hostapd/defconfig $(HOSTAPD_CONFIG) sed -i $(patsubst %,-e 's/^#\(%\)/\1/',$(HOSTAPD_CONFIG_ENABLE)) \ --2.11.0
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
cover hostapd: driver selection options
In reply to Alexander Mukhin+Sam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180206/e28f5ebb/attachment.html>
cover hostapd: driver selection options
In reply to Alexander MukhinHello,
Quoted 4 lines · Alexander Mukhin
Alexander Mukhin (3):
hostapd: select driver support
hostapd: make ACS dependent on nl80211
hostapd: drop default dependency on netlink
Series applied, thanks. On the last patch, we just did a minor tweak to use a if BR2_PACKAGE_HOSTAPD_VLAN ... endif block instead of duplicating the depends on dependency.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com