Skip to contentSkip to conversation

Documentation: framebuffer: update documentation to current state

PATCH Applied Oleksij Rempel 3 participants 3 messages Apr 3, 2018 – Apr 4, 2018 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Documentation: framebuffer: update documentation to current state

Framebuffer console support was added in 2015.

Reported-by TobSnyder at #barebox irc
---
 Documentation/user/framebuffer.rst | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
Documentation/user/framebuffer.rst +4 -3
index 7d004fa1c..d033ff08f 100644
@@ -1,9 +1,10 @@
 Framebuffer support
 ===================
 
-barebox has support for framebuffer devices. Currently there is no console support
-for framebuffers, so framebuffer usage is limited to splash screens only. barebox
-supports BMP and PNG graphics using the :ref:`command_splash` command. barebox
+Framebuffer spash screen
+------------------------
+
+barebox supports BMP and PNG graphics using the :ref:`command_splash` command. barebox
 currently has no support for backlights, so unless there is a board specific enable
 hook for enabling a display it must be done manually with a script. Since barebox
 has nothing useful to show on the framebuffer it doesn't enable it during startup.
Signature · 7 lines
2.14.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 7 lines · Oleksij Rempel

Framebuffer console support was added in 2015.

Reported-by TobSnyder at #barebox irc
---
 Documentation/user/framebuffer.rst | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Applied, thanks

Sascha

Quoted 28 lines
Documentation/user/framebuffer.rst +4 -3
index 7d004fa1c..d033ff08f 100644
@@ -1,9 +1,10 @@
 Framebuffer support
 ===================
 
-barebox has support for framebuffer devices. Currently there is no console support
-for framebuffers, so framebuffer usage is limited to splash screens only. barebox
-supports BMP and PNG graphics using the :ref:`command_splash` command. barebox
+Framebuffer spash screen
+------------------------
+
+barebox supports BMP and PNG graphics using the :ref:`command_splash` command. barebox
 currently has no support for backlights, so unless there is a board specific enable
 hook for enabling a display it must be done manually with a script. Since barebox
 has nothing useful to show on the framebuffer it doesn't enable it during startup.
Signature · 7 lines
2.14.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw
In reply to Oleksij Rempel
Quoted 13 lines · Oleksij Rempel

Framebuffer console support was added in 2015.

Reported-by TobSnyder at #barebox irc
---
 Documentation/user/framebuffer.rst | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
Documentation/user/framebuffer.rst +0 -0
index 7d004fa1c..d033ff08f 100644

Documentation/user/framebuffer.rst line 4

Quoted 7 lines
Documentation/user/framebuffer.rst +1 -3
@@ -1,9 +1,10 @@
 Framebuffer support
 ===================
 
-barebox has support for framebuffer devices. Currently there is no console support
-for framebuffers, so framebuffer usage is limited to splash screens only. barebox
-supports BMP and PNG graphics using the :ref:`command_splash` command. barebox
+Framebuffer spash screen

s/spash/splash/

- Roland

Quoted 15 lines
Documentation/user/framebuffer.rst +3 -0
+------------------------
+
+barebox supports BMP and PNG graphics using the :ref:`command_splash` command. barebox
 currently has no support for backlights, so unless there is a board specific enable
 hook for enabling a display it must be done manually with a script. Since barebox
 has nothing useful to show on the framebuffer it doesn't enable it during startup.
Signature · 7 lines
2.14.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Roland Hieber                     | [email protected]     |
Pengutronix e.K.                  | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox