i.MX6DL: Add BTicino Mamoj board support
Subsystems (3)
v2 cover i.MX6DL: Add BTicino Mamoj board support
This series add support for BTicino i.MX6DL Mamoj board.
Changes for v2:
- Update Kconfig changes for CONFIG_FSL_ESDHC
- Add HAB support
Jagan Teki (7):
i.MX6: board: Add BTicino i.MX6DL Mamoj initial support i.MX6DL: mamoj: Add I2C support
i.MX6DL: mamoj: Add PFUZE100 support
configs: imx6dl_mamoj: Enable fastboot and ums
configs: imx6dl-mamoj: Add DFU support
configs: imx6dl-mamoj: Add Falcon mode support
configs: imx6dl-mamoj: Enable HAB
arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6dl-mamoj-u-boot.dtsi | 15 +++ arch/arm/dts/imx6dl-mamoj.dts | 225 ++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 32 +++++ board/bticino/mamoj/Kconfig | 12 ++ board/bticino/mamoj/MAINTAINERS | 10 ++ board/bticino/mamoj/Makefile | 8 ++ board/bticino/mamoj/README | 124 +++++++++++++++++++ board/bticino/mamoj/mamoj.c | 27 ++++ board/bticino/mamoj/spl.c | 165 +++++++++++++++++++++++++ configs/imx6dl_mamoj_defconfig | 52 ++++++++ include/configs/imx6dl-mamoj.h | 102 +++++++++++++++ 12 files changed, 773 insertions(+) create mode 100644 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-mamoj.dts create mode 100644 board/bticino/mamoj/Kconfig create mode 100644 board/bticino/mamoj/MAINTAINERS create mode 100644 board/bticino/mamoj/Makefile create mode 100644 board/bticino/mamoj/README create mode 100644 board/bticino/mamoj/mamoj.c create mode 100644 board/bticino/mamoj/spl.c create mode 100644 configs/imx6dl_mamoj_defconfig create mode 100644 include/configs/imx6dl-mamoj.h
Signature · 1 line
2.14.3
PATCH v2 1/7 i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Add initial support for i.MX6DL BTicino Mamoj board.
Mamoh board added:
- SPL
- SPL_DM
- SPL_OF_CONTROL
- DM for U-Boot proper
- OF_CONTROL for U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDP
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6dl-mamoj-u-boot.dtsi | 15 ++++ arch/arm/dts/imx6dl-mamoj.dts | 84 +++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 29 +++++++ board/bticino/mamoj/Kconfig | 12 +++ board/bticino/mamoj/MAINTAINERS | 10 +++ board/bticino/mamoj/Makefile | 8 ++ board/bticino/mamoj/README | 60 +++++++++++++ board/bticino/mamoj/mamoj.c | 27 ++++++ board/bticino/mamoj/spl.c | 154 ++++++++++++++++++++++++++++++++++ configs/imx6dl_mamoj_defconfig | 39 +++++++++ include/configs/imx6dl-mamoj.h | 88 +++++++++++++++++++ 12 files changed, 527 insertions(+) create mode 100644 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-mamoj.dts create mode 100644 board/bticino/mamoj/Kconfig create mode 100644 board/bticino/mamoj/MAINTAINERS create mode 100644 board/bticino/mamoj/Makefile create mode 100644 board/bticino/mamoj/README create mode 100644 board/bticino/mamoj/mamoj.c create mode 100644 board/bticino/mamoj/spl.c create mode 100644 configs/imx6dl_mamoj_defconfig create mode 100644 include/configs/imx6dl-mamoj.h
arch/arm/dts/Makefile +1 -0
@@ -398,6 +398,7 @@ dtb-$(CONFIG_MX6QDL) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-mamoj.dtb \ imx6q-cm-fx6.dtb \ imx6q-icore.dtb \ imx6q-icore-mipi.dtb \
arch/arm/dts/imx6dl-mamoj-u-boot.dtsi new file +15 -0
@@ -0,0 +1,15 @@ +/* + * Copyright (C) 2018 Jagan Teki <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +};
arch/arm/dts/imx6dl-mamoj.dts new file +84 -0
84 lines not on this page · raw message
arch/arm/mach-imx/mx6/Kconfig +29 -0
@@ -225,6 +225,34 @@ config TARGET_MX6MEMCAL config TARGET_MX6QARM2 bool "mx6qarm2" +config TARGET_MX6DL_MAMOJ + bool "Support BTicino Mamoj" + select MX6QDL + select OF_CONTROL + select PINCTRL + select DM + select DM_ETH + select DM_GPIO + select DM_MMC + select DM_THERMAL + select SPL + select SUPPORT_SPL + select SPL_DM if SPL + select SPL_OF_LIBFDT if SPL + select SPL_OF_CONTROL if SPL + select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SPL_GPIO_SUPPORT if SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBDISK_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL + select SPL_MMC_SUPPORT if SPL + select SPL_SERIAL_SUPPORT if SPL + select SPL_USB_HOST_SUPPORT if SPL + select SPL_USB_GADGET_SUPPORT if SPL + select SPL_USB_SDP_SUPPORT if SPL + select SPL_WATCHDOG_SUPPORT if SPL + config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)" select BOARD_LATE_INIT
@@ -458,6 +486,7 @@ source "board/bachmann/ot1200/Kconfig" source "board/barco/platinum/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" +source "board/bticino/mamoj/Kconfig" source "board/ccv/xpress/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig"
board/bticino/mamoj/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_MX6DL_MAMOJ + +config SYS_BOARD + default "mamoj" + +config SYS_VENDOR + default "bticino" + +config SYS_CONFIG_NAME + default "imx6dl-mamoj" + +endif
board/bticino/mamoj/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +MX6DL_MAMOJ BOARD +M: Jagan Teki <[email protected]> +M: Raffaele RECALCATI <[email protected]> +M: Simone CIANNI <[email protected]> +S: Maintained +F: board/bticino/mamoj +F: include/configs/imx6dl-mamoj.h +F: configs/imx6dl_mamoj_defconfig +F: arch/arm/dts/imx6dl-mamoj.dts +F: arch/arm/dts/imx6dl-mamoj-u-boot.dtsi
board/bticino/mamoj/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +# Copyright (C) 2018 BTicino +# Copyright (C) 2017 Amarula Solutions B.V. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mamoj.o +obj-$(CONFIG_SPL_BUILD) += spl.o
board/bticino/mamoj/README new file +60 -0
60 lines not on this page · raw message
board/bticino/mamoj/mamoj.c new file +27 -0
@@ -0,0 +1,27 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_init (void ) +{ +/* Address of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +return 0 ; +} + +int dram_init (void ) +{ + gd->ram_size =imx_ddr_size (); + +return 0 ; +}
board/bticino/mamoj/spl.c new file +154 -0
154 lines not on this page · raw message
configs/imx6dl_mamoj_defconfig new file +39 -0
@@ -0,0 +1,39 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_MX6DL_MAMOJ=y +# CONFIG_CMD_BMODE is not set +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mamoj" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_BOOTDELAY=3 +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="=> " +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_USB=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_FEC_MXC=y +CONFIG_FSL_ESDHC=y +CONFIG_PINCTRL_IMX6=y +CONFIG_MXC_UART=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_IMX_THERMAL=y
include/configs/imx6dl-mamoj.h new file +88 -0
88 lines not on this page · raw message
Signature · 1 line
2.14.3
PATCH v2 1/7 i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Hi Jagan,
Quoted 466 lines · Jagan Teki
Add initial support for i.MX6DL BTicino Mamoj board.
Mamoh board added:
- SPL
-SPL_DM
-SPL_OF_CONTROL
- DM for U-Boot proper
-OF_CONTROLfor U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDPSigned-off-by Simone CIANNI <[email protected]>Signed-off-by Raffaele RECALCATI <[email protected]>Signed-off-by Jagan Teki <[email protected]>--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6dl-mamoj-u-boot.dtsi | 15 ++++ arch/arm/dts/imx6dl-mamoj.dts | 84 +++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 29 +++++++ board/bticino/mamoj/Kconfig | 12 +++ board/bticino/mamoj/MAINTAINERS | 10 +++ board/bticino/mamoj/Makefile | 8 ++ board/bticino/mamoj/README | 60 +++++++++++++ board/bticino/mamoj/mamoj.c | 27 ++++++ board/bticino/mamoj/spl.c | 154 ++++++++++++++++++++++++++++++++++ configs/imx6dl_mamoj_defconfig | 39 +++++++++ include/configs/imx6dl-mamoj.h | 88 +++++++++++++++++++ 12 files changed, 527 insertions(+) create mode 100644 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-mamoj.dts create mode 100644 board/bticino/mamoj/Kconfig create mode 100644 board/bticino/mamoj/MAINTAINERS create mode 100644 board/bticino/mamoj/Makefile create mode 100644 board/bticino/mamoj/README create mode 100644 board/bticino/mamoj/mamoj.c create mode 100644 board/bticino/mamoj/spl.c create mode 100644 configs/imx6dl_mamoj_defconfig create mode 100644 include/configs/imx6dl-mamoj.harch/arm/dts/Makefile +1
-0@@ -398,6 +398,7 @@ dtb-$(CONFIG_MX6QDL) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-mamoj.dtb \ imx6q-cm-fx6.dtb \ imx6q-icore.dtb \ imx6q-icore-mipi.dtb \arch/arm/dts/imx6dl-mamoj-u-boot.dtsi new file +15
-0@@ -0,0 +1,15 @@ +/* + * Copyright (C) 2018 Jagan Teki <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +};arch/arm/dts/imx6dl-mamoj.dts new file +84
-0@@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BTicino + * Copyright (C) 2018 Amarula Solutions B.V. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl.dtsi" + +/ { + model = "BTicino i.MX6DL Mamoj board"; + compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "mii"; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0 + MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0 + MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +};arch/arm/mach-imx/mx6/Kconfig +29
-0@@ -225,6 +225,34 @@ config TARGET_MX6MEMCAL config TARGET_MX6QARM2 bool "mx6qarm2" +config TARGET_MX6DL_MAMOJ + bool "Support BTicino Mamoj" + select MX6QDL + select OF_CONTROL + select PINCTRL + select DM + select DM_ETH + select DM_GPIO + select DM_MMC + select DM_THERMAL + select SPL + select SUPPORT_SPL + select SPL_DM if SPL + select SPL_OF_LIBFDT if SPL + select SPL_OF_CONTROL if SPL + select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SPL_GPIO_SUPPORT if SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBDISK_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL + select SPL_MMC_SUPPORT if SPL + select SPL_SERIAL_SUPPORT if SPL + select SPL_USB_HOST_SUPPORT if SPL + select SPL_USB_GADGET_SUPPORT if SPL + select SPL_USB_SDP_SUPPORT if SPL + select SPL_WATCHDOG_SUPPORT if SPL + config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)" select BOARD_LATE_INIT@@ -458,6 +486,7 @@ source "board/bachmann/ot1200/Kconfig" source "board/barco/platinum/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" +source "board/bticino/mamoj/Kconfig" source "board/ccv/xpress/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig"board/bticino/mamoj/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_MX6DL_MAMOJ + +config SYS_BOARD + default "mamoj" + +config SYS_VENDOR + default "bticino" + +config SYS_CONFIG_NAME + default "imx6dl-mamoj" + +endifboard/bticino/mamoj/MAINTAINERS new file +10
-0@@ -0,0 +1,10 @@ +MX6DL_MAMOJ BOARD +M: Jagan Teki <[email protected]> +M: Raffaele RECALCATI <[email protected]> +M: Simone CIANNI <[email protected]> +S: Maintained +F: board/bticino/mamoj +F: include/configs/imx6dl-mamoj.h +F: configs/imx6dl_mamoj_defconfig +F: arch/arm/dts/imx6dl-mamoj.dts +F: arch/arm/dts/imx6dl-mamoj-u-boot.dtsiboard/bticino/mamoj/Makefile new file +8
-0@@ -0,0 +1,8 @@ +# Copyright (C) 2018 BTicino +# Copyright (C) 2017 Amarula Solutions B.V. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mamoj.o +obj-$(CONFIG_SPL_BUILD) += spl.oboard/bticino/mamoj/README new file +60
-0@@ -0,0 +1,60 @@ +BTicino Mamoj board: +=================== + +Build: + + $ make mrproper + $ make imx6dl_mamoj_defconfig + $ make + + This will generate the SPL image called SPL and the u-boot-dtb.img. + +The following methods can be used for booting Mamoj boards: + +1. USB SDP boot + +1. USB SDP boot: +--------------- + + - Build imx_usb_loader + + $ git clone git://github.com/boundarydevices/imx_usb_loader.git + $ cd imx_usb_loader + $ make + + - Build the BSP and copy SPL, u-boot-dtb.img in imx_usb_loader directory + + - Put the board in "Serial Download Mode" + + - Plug-in USB-to-Serial, Open minicom 1152008N1 and USB OTG cables to Host + + - Turn-on board + + - Identify VID/PID using lsusb + + Bus 001 Device 010: ID 15a2:0061 Freescale Semiconductor, Inc. i.MX 6Solo/6DualLite SystemOnChip in RecoveryMode + + - Update the conf files + + imx_usb.conf + 0x15a2:0x0061, mx6_usb_rom.conf, 0x0525:0xb4a4, mx6_usb_sdp_spl.conf + + mx6_usb_rom.conf + mx6_usb + hid,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + SPL:jump header2 + + mx6_usb_sdp_spl.conf + mx6_spl_sdp + hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + u-boot-dtb.img:jump header2 + + - Launch the loader + + $ ./imx_usb + + We can see U-Boot boot from USB SDP on minicom + +-- +Jagan Teki <[email protected]> +03/12/18board/bticino/mamoj/mamoj.c new file +27
-0@@ -0,0 +1,27 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_init (void ) +{ +/* Address of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +return 0 ; +} + +int dram_init (void ) +{ + gd->ram_size =imx_ddr_size (); + +return 0 ; +}board/bticino/mamoj/spl.c new file +102
-0@@ -0,0 +1,154 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <spl.h> + +#include <asm/io.h> +#include <linux/sizes.h> + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart3_pads[] = { +IOMUX_PADS (PAD_EIM_D24__UART3_TX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +IOMUX_PADS (PAD_EIM_D25__UART3_RX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +}; + +static int mx6dl_dcd_table[] = { +0x020e0774 ,0x000C0000 ,/* MX6_IOM_GRP_DDR_TYPE */ +0x020e0754 ,0x00000000 ,/* MX6_IOM_GRP_DDRPKE */ + +0x020e04ac ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_0 */ +0x020e04b0 ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_1 */ + +0x020e0464 ,0x00000028 ,/* MX6_IOM_DRAM_CAS */ +0x020e0490 ,0x00000028 ,/* MX6_IOM_DRAM_RAS */ +0x020e074c ,0x00000028 ,/* MX6_IOM_GRP_ADDDS */ + +0x020e0494 ,0x00000028 ,/* MX6_IOM_DRAM_RESET */ +0x020e04a0 ,0x00000000 ,/* MX6_IOM_DRAM_SDBA2 */ +0x020e04b4 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT0 */ +0x020e04b8 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT1 */ +0x020e076c ,0x00000028 ,/* MX6_IOM_GRP_CTLDS */ + +0x020e0750 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE_CTL */ +0x020e04bc ,0x00000028 ,/* MX6_IOM_DRAM_SDQS0 */ +0x020e04c0 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS1 */ +0x020e04c4 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS2 */ +0x020e04c8 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS3 */ + +0x020e0760 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE */ +0x020e0764 ,0x00000028 ,/* MX6_IOM_GRP_B0DS */ +0x020e0770 ,0x00000028 ,/* MX6_IOM_GRP_B1DS */ +0x020e0778 ,0x00000028 ,/* MX6_IOM_GRP_B2DS */ +0x020e077c ,0x00000028 ,/* MX6_IOM_GRP_B3DS */ + +0x020e0470 ,0x00000028 ,/* MX6_IOM_DRAM_DQM0 */ +0x020e0474 ,0x00000028 ,/* MX6_IOM_DRAM_DQM1 */ +0x020e0478 ,0x00000028 ,/* MX6_IOM_DRAM_DQM2 */ +0x020e047c ,0x00000028 ,/* MX6_IOM_DRAM_DQM3 */ + +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ + +0x021b0800 ,0xA1390003 ,/* DDR_PHY_P0_MPZQHWCTRL */ + +0x021b080c ,0x0042004b ,/* MMDC1_MPWLDECTRL0 */ +0x021b0810 ,0x0038003c ,/* MMDC1_MPWLDECTRL1 */ + +0x021b083c ,0x42340230 ,/* MPDGCTRL0 PHY0 */ +0x021b0840 ,0x0228022c ,/* MPDGCTRL1 PHY0 */ + +0x021b0848 ,0x42444646 ,/* MPRDDLCTL PHY0 */ + +0x021b0850 ,0x38382e2e ,/* MPWRDLCTL PHY0 */ + +0x021b081c ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY0DL3 */ +0x021b0820 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY1DL3 */ +0x021b0824 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY2DL3 */ +0x021b0828 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY3DL3 */ + +0x021b08b8 ,0x00000800 ,/* DDR_PHY_P0_MPMUR0 */ + +0x021b0004 ,0x0002002D ,/* MMDC0_MDPDC */ +0x021b0008 ,0x00333040 ,/* MMDC0_MDOTC */ +0x021b000c ,0x3F4352F3 ,/* MMDC0_MDCFG0 */ +0x021b0010 ,0xB66D8B63 ,/* MMDC0_MDCFG1 */ +0x021b0014 ,0x01FF00DB ,/* MMDC0_MDCFG2 */ + +0x021b0018 ,0x00011740 ,/* MMDC0_MDMISC */ +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ +0x021b002c ,0x000026D2 ,/* MMDC0_MDRWD */ +0x021b0030 ,0x00431023 ,/* MMDC0_MDOR */ +0x021b0040 ,0x00000017 ,/* Chan0 CS0_END */ +0x021b0000 ,0x83190000 ,/* MMDC0_MDCTL */ + +0x021b001c ,0x02008032 ,/* MMDC0_MDSCR MR2 write, CS0 */ +0x021b001c ,0x00008033 ,/* MMDC0_MDSCR, MR3 write, CS0 */ +0x021b001c ,0x00048031 ,/* MMDC0_MDSCR, MR1 write, CS0 */ +0x021b001c ,0x15208030 ,/* MMDC0_MDSCR, MR0write, CS0 */ +0x021b001c ,0x04008040 ,/* MMDC0_MDSCR */
board/bticino/mamoj/spl.c line 112
Quoted 10 lines
board/bticino/mamoj/spl.c new file +10
-0+ +0x021b0020 ,0x00007800 ,/* MMDC0_MDREF */ + +0x021b0818 ,0x00022227 ,/* DDR_PHY_P0_MPODTCTRL */ + +0x021b0004 ,0x0002556D ,/* MMDC0_MDPDC */ +0x021b0404 ,0x00011006 ,/* MMDC0_MAPSR ADOPT */ + 0x021b001c, 0x00000000, /* MMDC0_MDSCR */ +}; +
Sorry to have not raised this before. I saw this the first time, but I did not understand. I tried to find a reason for it, but still I had no answer.
This is a DL, and DDR support is full integrated in U-Boot, including dynamic calibration if desired. What is the reason to dump the DCD table into code and push it with ddr_init, instead of setting structures for chip, gpr and calibration as most of boards are doing ? If you dump the table, you could this in the .cfg file where the DCD table belongs to, of course adding entries for DDR initialisation. I do not see after long thoughts any reason to go in this way.
Quoted 9 lines
board/bticino/mamoj/spl.c new file +9
-0+static void ccgr_init (void ) +{ +struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR ; + +writel (0x00003f3f , &ccm->CCGR0); +writel (0x0030fc00 , &ccm->CCGR1); +writel (0x000fc000 , &ccm->CCGR2); +writel (0x3f300000 , &ccm->CCGR3); +writel (0xff00f300 , &ccm->CCGR4);
board/bticino/mamoj/spl.c line 131
Quoted 10 lines
board/bticino/mamoj/spl.c new file +10
-0+writel (0x0f0000c3 , &ccm->CCGR5); +writel (0x000003cc , &ccm->CCGR6); +} + +static void ddr_init (int *table,int size) +{ +int i; + +for (i =0 ; i < size /2 ; i++) +writel (table[2 * i +1 ], table[2 * i]);
I really dislike this way to do. This is a hidden DCD table hardcoded in software. Then, it is better to use the DCD table directly using the IMX header. But board supports SPL, it should be straight forward to convert it.
Quoted 153 lines
board/bticino/mamoj/spl.c new file +23
-0+} + +void board_init_f (ulong dummy) +{ +ccgr_init (); + +/* setup AIPS and disable watchdog */ +arch_cpu_init (); + +gpr_init (); + +/* iomux */ +SETUP_IOMUX_PADS (uart3_pads); + +/* setup GP timer */ +timer_init (); + +/* UART clocks enabled and gd valid - init serial console */ +preloader_console_init (); + +/* DDR initialization */ +ddr_init (mx6dl_dcd_table,ARRAY_SIZE (mx6dl_dcd_table)); +}configs/imx6dl_mamoj_defconfig new file +39
-0@@ -0,0 +1,39 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_MX6DL_MAMOJ=y +# CONFIG_CMD_BMODE is not set +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mamoj" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_BOOTDELAY=3 +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="=> " +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_USB=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_FEC_MXC=y +CONFIG_FSL_ESDHC=y +CONFIG_PINCTRL_IMX6=y +CONFIG_MXC_UART=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_IMX_THERMAL=yinclude/configs/imx6dl-mamoj.h new file +78
-0@@ -0,0 +1,88 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* Configuration settings for the BTicion i.MX6DL Mamoj board. +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef __IMX6DL_MAMOJ_CONFIG_H +#define __IMX6DL_MAMOJ_CONFIG_H + +#include <linux/sizes.h> +#include "mx6_common.h" + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) + +/* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE SZ_128K + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Environment */ +#ifndef CONFIG_ENV_IS_NOWHERE +/* Environment in MMC */ +# if defined(CONFIG_ENV_IS_IN_MMC ) +# define CONFIG_ENV_OFFSET 0x100000 +# endif +#endif + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EXTRA_ENV_SETTINGS \ + "scriptaddr=0x14000000\0" \ + "fdt_addr_r=0x13000000\0" \ + "kernel_addr_r=0x10008000\0" \ + "fdt_high=0xffffffff\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 2) + +#include <config_distro_bootcmd.h> +#endif + +/* UART */ +#define CONFIG_MXC_UART_BASE UART3_BASE + +/* MMC */ +#define CONFIG_SYS_MMC_ENV_DEV 2 +#define CONFIG_SUPPORT_EMMC_BOOT + +/* Ethernet */ +#define CONFIG_FEC_MXC_PHYADDR 1 +#define CONFIG_MII + +/* USB */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
include/configs/imx6dl-mamoj.h line 88
Quoted 10 lines
include/configs/imx6dl-mamoj.h new file +10
-0+ +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_SP_OFFSET) + +/* SPL */ +#include "imx6_spl.h" + +#endif /* __IMX6DL_MAMOJ_CONFIG_H */
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 1/7 i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Quoted 484 lines · Stefano Babic
Hi Jagan,
Quoted 466 lines · Jagan Teki
Add initial support for i.MX6DL BTicino Mamoj board.
Mamoh board added:
- SPL
-SPL_DM
-SPL_OF_CONTROL
- DM for U-Boot proper
-OF_CONTROLfor U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDPSigned-off-by Simone CIANNI <[email protected]>Signed-off-by Raffaele RECALCATI <[email protected]>Signed-off-by Jagan Teki <[email protected]>--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6dl-mamoj-u-boot.dtsi | 15 ++++ arch/arm/dts/imx6dl-mamoj.dts | 84 +++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 29 +++++++ board/bticino/mamoj/Kconfig | 12 +++ board/bticino/mamoj/MAINTAINERS | 10 +++ board/bticino/mamoj/Makefile | 8 ++ board/bticino/mamoj/README | 60 +++++++++++++ board/bticino/mamoj/mamoj.c | 27 ++++++ board/bticino/mamoj/spl.c | 154 ++++++++++++++++++++++++++++++++++ configs/imx6dl_mamoj_defconfig | 39 +++++++++ include/configs/imx6dl-mamoj.h | 88 +++++++++++++++++++ 12 files changed, 527 insertions(+) create mode 100644 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-mamoj.dts create mode 100644 board/bticino/mamoj/Kconfig create mode 100644 board/bticino/mamoj/MAINTAINERS create mode 100644 board/bticino/mamoj/Makefile create mode 100644 board/bticino/mamoj/README create mode 100644 board/bticino/mamoj/mamoj.c create mode 100644 board/bticino/mamoj/spl.c create mode 100644 configs/imx6dl_mamoj_defconfig create mode 100644 include/configs/imx6dl-mamoj.harch/arm/dts/Makefile +1
-0@@ -398,6 +398,7 @@ dtb-$(CONFIG_MX6QDL) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-mamoj.dtb \ imx6q-cm-fx6.dtb \ imx6q-icore.dtb \ imx6q-icore-mipi.dtb \arch/arm/dts/imx6dl-mamoj-u-boot.dtsi new file +15
-0@@ -0,0 +1,15 @@ +/* + * Copyright (C) 2018 Jagan Teki <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +};arch/arm/dts/imx6dl-mamoj.dts new file +84
-0@@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BTicino + * Copyright (C) 2018 Amarula Solutions B.V. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl.dtsi" + +/ { + model = "BTicino i.MX6DL Mamoj board"; + compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "mii"; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0 + MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0 + MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +};arch/arm/mach-imx/mx6/Kconfig +29
-0@@ -225,6 +225,34 @@ config TARGET_MX6MEMCAL config TARGET_MX6QARM2 bool "mx6qarm2" +config TARGET_MX6DL_MAMOJ + bool "Support BTicino Mamoj" + select MX6QDL + select OF_CONTROL + select PINCTRL + select DM + select DM_ETH + select DM_GPIO + select DM_MMC + select DM_THERMAL + select SPL + select SUPPORT_SPL + select SPL_DM if SPL + select SPL_OF_LIBFDT if SPL + select SPL_OF_CONTROL if SPL + select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SPL_GPIO_SUPPORT if SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBDISK_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL + select SPL_MMC_SUPPORT if SPL + select SPL_SERIAL_SUPPORT if SPL + select SPL_USB_HOST_SUPPORT if SPL + select SPL_USB_GADGET_SUPPORT if SPL + select SPL_USB_SDP_SUPPORT if SPL + select SPL_WATCHDOG_SUPPORT if SPL + config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)" select BOARD_LATE_INIT@@ -458,6 +486,7 @@ source "board/bachmann/ot1200/Kconfig" source "board/barco/platinum/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" +source "board/bticino/mamoj/Kconfig" source "board/ccv/xpress/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig"board/bticino/mamoj/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_MX6DL_MAMOJ + +config SYS_BOARD + default "mamoj" + +config SYS_VENDOR + default "bticino" + +config SYS_CONFIG_NAME + default "imx6dl-mamoj" + +endifboard/bticino/mamoj/MAINTAINERS new file +10
-0@@ -0,0 +1,10 @@ +MX6DL_MAMOJ BOARD +M: Jagan Teki <[email protected]> +M: Raffaele RECALCATI <[email protected]> +M: Simone CIANNI <[email protected]> +S: Maintained +F: board/bticino/mamoj +F: include/configs/imx6dl-mamoj.h +F: configs/imx6dl_mamoj_defconfig +F: arch/arm/dts/imx6dl-mamoj.dts +F: arch/arm/dts/imx6dl-mamoj-u-boot.dtsiboard/bticino/mamoj/Makefile new file +8
-0@@ -0,0 +1,8 @@ +# Copyright (C) 2018 BTicino +# Copyright (C) 2017 Amarula Solutions B.V. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mamoj.o +obj-$(CONFIG_SPL_BUILD) += spl.oboard/bticino/mamoj/README new file +60
-0@@ -0,0 +1,60 @@ +BTicino Mamoj board: +=================== + +Build: + + $ make mrproper + $ make imx6dl_mamoj_defconfig + $ make + + This will generate the SPL image called SPL and the u-boot-dtb.img. + +The following methods can be used for booting Mamoj boards: + +1. USB SDP boot + +1. USB SDP boot: +--------------- + + - Build imx_usb_loader + + $ git clone git://github.com/boundarydevices/imx_usb_loader.git + $ cd imx_usb_loader + $ make + + - Build the BSP and copy SPL, u-boot-dtb.img in imx_usb_loader directory + + - Put the board in "Serial Download Mode" + + - Plug-in USB-to-Serial, Open minicom 1152008N1 and USB OTG cables to Host + + - Turn-on board + + - Identify VID/PID using lsusb + + Bus 001 Device 010: ID 15a2:0061 Freescale Semiconductor, Inc. i.MX 6Solo/6DualLite SystemOnChip in RecoveryMode + + - Update the conf files + + imx_usb.conf + 0x15a2:0x0061, mx6_usb_rom.conf, 0x0525:0xb4a4, mx6_usb_sdp_spl.conf + + mx6_usb_rom.conf + mx6_usb + hid,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + SPL:jump header2 + + mx6_usb_sdp_spl.conf + mx6_spl_sdp + hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + u-boot-dtb.img:jump header2 + + - Launch the loader + + $ ./imx_usb + + We can see U-Boot boot from USB SDP on minicom + +-- +Jagan Teki <[email protected]> +03/12/18board/bticino/mamoj/mamoj.c new file +27
-0@@ -0,0 +1,27 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_init (void ) +{ +/* Address of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +return 0 ; +} + +int dram_init (void ) +{ + gd->ram_size =imx_ddr_size (); + +return 0 ; +}board/bticino/mamoj/spl.c new file +102
-0@@ -0,0 +1,154 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <spl.h> + +#include <asm/io.h> +#include <linux/sizes.h> + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart3_pads[] = { +IOMUX_PADS (PAD_EIM_D24__UART3_TX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +IOMUX_PADS (PAD_EIM_D25__UART3_RX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +}; + +static int mx6dl_dcd_table[] = { +0x020e0774 ,0x000C0000 ,/* MX6_IOM_GRP_DDR_TYPE */ +0x020e0754 ,0x00000000 ,/* MX6_IOM_GRP_DDRPKE */ + +0x020e04ac ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_0 */ +0x020e04b0 ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_1 */ + +0x020e0464 ,0x00000028 ,/* MX6_IOM_DRAM_CAS */ +0x020e0490 ,0x00000028 ,/* MX6_IOM_DRAM_RAS */ +0x020e074c ,0x00000028 ,/* MX6_IOM_GRP_ADDDS */ + +0x020e0494 ,0x00000028 ,/* MX6_IOM_DRAM_RESET */ +0x020e04a0 ,0x00000000 ,/* MX6_IOM_DRAM_SDBA2 */ +0x020e04b4 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT0 */ +0x020e04b8 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT1 */ +0x020e076c ,0x00000028 ,/* MX6_IOM_GRP_CTLDS */ + +0x020e0750 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE_CTL */ +0x020e04bc ,0x00000028 ,/* MX6_IOM_DRAM_SDQS0 */ +0x020e04c0 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS1 */ +0x020e04c4 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS2 */ +0x020e04c8 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS3 */ + +0x020e0760 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE */ +0x020e0764 ,0x00000028 ,/* MX6_IOM_GRP_B0DS */ +0x020e0770 ,0x00000028 ,/* MX6_IOM_GRP_B1DS */ +0x020e0778 ,0x00000028 ,/* MX6_IOM_GRP_B2DS */ +0x020e077c ,0x00000028 ,/* MX6_IOM_GRP_B3DS */ + +0x020e0470 ,0x00000028 ,/* MX6_IOM_DRAM_DQM0 */ +0x020e0474 ,0x00000028 ,/* MX6_IOM_DRAM_DQM1 */ +0x020e0478 ,0x00000028 ,/* MX6_IOM_DRAM_DQM2 */ +0x020e047c ,0x00000028 ,/* MX6_IOM_DRAM_DQM3 */ + +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ + +0x021b0800 ,0xA1390003 ,/* DDR_PHY_P0_MPZQHWCTRL */ + +0x021b080c ,0x0042004b ,/* MMDC1_MPWLDECTRL0 */ +0x021b0810 ,0x0038003c ,/* MMDC1_MPWLDECTRL1 */ + +0x021b083c ,0x42340230 ,/* MPDGCTRL0 PHY0 */ +0x021b0840 ,0x0228022c ,/* MPDGCTRL1 PHY0 */ + +0x021b0848 ,0x42444646 ,/* MPRDDLCTL PHY0 */ + +0x021b0850 ,0x38382e2e ,/* MPWRDLCTL PHY0 */ + +0x021b081c ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY0DL3 */ +0x021b0820 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY1DL3 */ +0x021b0824 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY2DL3 */ +0x021b0828 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY3DL3 */ + +0x021b08b8 ,0x00000800 ,/* DDR_PHY_P0_MPMUR0 */ + +0x021b0004 ,0x0002002D ,/* MMDC0_MDPDC */ +0x021b0008 ,0x00333040 ,/* MMDC0_MDOTC */ +0x021b000c ,0x3F4352F3 ,/* MMDC0_MDCFG0 */ +0x021b0010 ,0xB66D8B63 ,/* MMDC0_MDCFG1 */ +0x021b0014 ,0x01FF00DB ,/* MMDC0_MDCFG2 */ + +0x021b0018 ,0x00011740 ,/* MMDC0_MDMISC */ +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ +0x021b002c ,0x000026D2 ,/* MMDC0_MDRWD */ +0x021b0030 ,0x00431023 ,/* MMDC0_MDOR */ +0x021b0040 ,0x00000017 ,/* Chan0 CS0_END */ +0x021b0000 ,0x83190000 ,/* MMDC0_MDCTL */ + +0x021b001c ,0x02008032 ,/* MMDC0_MDSCR MR2 write, CS0 */ +0x021b001c ,0x00008033 ,/* MMDC0_MDSCR, MR3 write, CS0 */ +0x021b001c ,0x00048031 ,/* MMDC0_MDSCR, MR1 write, CS0 */ +0x021b001c ,0x15208030 ,/* MMDC0_MDSCR, MR0write, CS0 */ +0x021b001c ,0x04008040 ,/* MMDC0_MDSCR */ board/bticino/mamoj/spl.c line 112
Quoted 10 lines
board/bticino/mamoj/spl.c new file +10
-0+ +0x021b0020 ,0x00007800 ,/* MMDC0_MDREF */ + +0x021b0818 ,0x00022227 ,/* DDR_PHY_P0_MPODTCTRL */ + +0x021b0004 ,0x0002556D ,/* MMDC0_MDPDC */ +0x021b0404 ,0x00011006 ,/* MMDC0_MAPSR ADOPT */ + 0x021b001c, 0x00000000, /* MMDC0_MDSCR */ +}; +Sorry to have not raised this before. I saw this the first time, but I did not understand. I tried to find a reason for it, but still I had no answer.
Quoted 7 lines
This is a DL, and DDR support is full integrated in U-Boot, including dynamic calibration if desired. What is the reason to dump the DCD table into code and push it with
ddr_init, instead of setting structures for chip, gpr and calibration as most of boards are doing ? If you dump the table, you could this in the .cfg file where the DCD table belongs to, of course adding entries for DDR initialisation. I do not see after long thoughts any reason to go in this way.
Like initializing ddr config and calibration using mx6sdl_dram_iocfg and mx6_dram_cfg? yes I usually does the same instead of hot codding hex values. It's my bad will update accoodingly and send.
Jagan.
PATCH v2 1/7 i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Quoted 493 lines · Jagan Teki
Quoted 484 lines · Stefano Babic
Hi Jagan,
Quoted 466 lines · Jagan Teki
Add initial support for i.MX6DL BTicino Mamoj board.
Mamoh board added:
- SPL
-SPL_DM
-SPL_OF_CONTROL
- DM for U-Boot proper
-OF_CONTROLfor U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDPSigned-off-by Simone CIANNI <[email protected]>Signed-off-by Raffaele RECALCATI <[email protected]>Signed-off-by Jagan Teki <[email protected]>--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6dl-mamoj-u-boot.dtsi | 15 ++++ arch/arm/dts/imx6dl-mamoj.dts | 84 +++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 29 +++++++ board/bticino/mamoj/Kconfig | 12 +++ board/bticino/mamoj/MAINTAINERS | 10 +++ board/bticino/mamoj/Makefile | 8 ++ board/bticino/mamoj/README | 60 +++++++++++++ board/bticino/mamoj/mamoj.c | 27 ++++++ board/bticino/mamoj/spl.c | 154 ++++++++++++++++++++++++++++++++++ configs/imx6dl_mamoj_defconfig | 39 +++++++++ include/configs/imx6dl-mamoj.h | 88 +++++++++++++++++++ 12 files changed, 527 insertions(+) create mode 100644 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-mamoj.dts create mode 100644 board/bticino/mamoj/Kconfig create mode 100644 board/bticino/mamoj/MAINTAINERS create mode 100644 board/bticino/mamoj/Makefile create mode 100644 board/bticino/mamoj/README create mode 100644 board/bticino/mamoj/mamoj.c create mode 100644 board/bticino/mamoj/spl.c create mode 100644 configs/imx6dl_mamoj_defconfig create mode 100644 include/configs/imx6dl-mamoj.harch/arm/dts/Makefile +1
-0@@ -398,6 +398,7 @@ dtb-$(CONFIG_MX6QDL) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-mamoj.dtb \ imx6q-cm-fx6.dtb \ imx6q-icore.dtb \ imx6q-icore-mipi.dtb \arch/arm/dts/imx6dl-mamoj-u-boot.dtsi new file +15
-0@@ -0,0 +1,15 @@ +/* + * Copyright (C) 2018 Jagan Teki <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +};arch/arm/dts/imx6dl-mamoj.dts new file +84
-0@@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BTicino + * Copyright (C) 2018 Amarula Solutions B.V. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl.dtsi" + +/ { + model = "BTicino i.MX6DL Mamoj board"; + compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "mii"; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0 + MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0 + MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +};arch/arm/mach-imx/mx6/Kconfig +29
-0@@ -225,6 +225,34 @@ config TARGET_MX6MEMCAL config TARGET_MX6QARM2 bool "mx6qarm2" +config TARGET_MX6DL_MAMOJ + bool "Support BTicino Mamoj" + select MX6QDL + select OF_CONTROL + select PINCTRL + select DM + select DM_ETH + select DM_GPIO + select DM_MMC + select DM_THERMAL + select SPL + select SUPPORT_SPL + select SPL_DM if SPL + select SPL_OF_LIBFDT if SPL + select SPL_OF_CONTROL if SPL + select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SPL_GPIO_SUPPORT if SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBDISK_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL + select SPL_MMC_SUPPORT if SPL + select SPL_SERIAL_SUPPORT if SPL + select SPL_USB_HOST_SUPPORT if SPL + select SPL_USB_GADGET_SUPPORT if SPL + select SPL_USB_SDP_SUPPORT if SPL + select SPL_WATCHDOG_SUPPORT if SPL + config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)" select BOARD_LATE_INIT@@ -458,6 +486,7 @@ source "board/bachmann/ot1200/Kconfig" source "board/barco/platinum/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" +source "board/bticino/mamoj/Kconfig" source "board/ccv/xpress/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig"board/bticino/mamoj/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_MX6DL_MAMOJ + +config SYS_BOARD + default "mamoj" + +config SYS_VENDOR + default "bticino" + +config SYS_CONFIG_NAME + default "imx6dl-mamoj" + +endifboard/bticino/mamoj/MAINTAINERS new file +10
-0@@ -0,0 +1,10 @@ +MX6DL_MAMOJ BOARD +M: Jagan Teki <[email protected]> +M: Raffaele RECALCATI <[email protected]> +M: Simone CIANNI <[email protected]> +S: Maintained +F: board/bticino/mamoj +F: include/configs/imx6dl-mamoj.h +F: configs/imx6dl_mamoj_defconfig +F: arch/arm/dts/imx6dl-mamoj.dts +F: arch/arm/dts/imx6dl-mamoj-u-boot.dtsiboard/bticino/mamoj/Makefile new file +8
-0@@ -0,0 +1,8 @@ +# Copyright (C) 2018 BTicino +# Copyright (C) 2017 Amarula Solutions B.V. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mamoj.o +obj-$(CONFIG_SPL_BUILD) += spl.oboard/bticino/mamoj/README new file +60
-0@@ -0,0 +1,60 @@ +BTicino Mamoj board: +=================== + +Build: + + $ make mrproper + $ make imx6dl_mamoj_defconfig + $ make + + This will generate the SPL image called SPL and the u-boot-dtb.img. + +The following methods can be used for booting Mamoj boards: + +1. USB SDP boot + +1. USB SDP boot: +--------------- + + - Build imx_usb_loader + + $ git clone git://github.com/boundarydevices/imx_usb_loader.git + $ cd imx_usb_loader + $ make + + - Build the BSP and copy SPL, u-boot-dtb.img in imx_usb_loader directory + + - Put the board in "Serial Download Mode" + + - Plug-in USB-to-Serial, Open minicom 1152008N1 and USB OTG cables to Host + + - Turn-on board + + - Identify VID/PID using lsusb + + Bus 001 Device 010: ID 15a2:0061 Freescale Semiconductor, Inc. i.MX 6Solo/6DualLite SystemOnChip in RecoveryMode + + - Update the conf files + + imx_usb.conf + 0x15a2:0x0061, mx6_usb_rom.conf, 0x0525:0xb4a4, mx6_usb_sdp_spl.conf + + mx6_usb_rom.conf + mx6_usb + hid,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + SPL:jump header2 + + mx6_usb_sdp_spl.conf + mx6_spl_sdp + hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + u-boot-dtb.img:jump header2 + + - Launch the loader + + $ ./imx_usb + + We can see U-Boot boot from USB SDP on minicom + +-- +Jagan Teki <[email protected]> +03/12/18board/bticino/mamoj/mamoj.c new file +27
-0@@ -0,0 +1,27 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_init (void ) +{ +/* Address of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +return 0 ; +} + +int dram_init (void ) +{ + gd->ram_size =imx_ddr_size (); + +return 0 ; +}board/bticino/mamoj/spl.c new file +102
-0@@ -0,0 +1,154 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <spl.h> + +#include <asm/io.h> +#include <linux/sizes.h> + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart3_pads[] = { +IOMUX_PADS (PAD_EIM_D24__UART3_TX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +IOMUX_PADS (PAD_EIM_D25__UART3_RX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +}; + +static int mx6dl_dcd_table[] = { +0x020e0774 ,0x000C0000 ,/* MX6_IOM_GRP_DDR_TYPE */ +0x020e0754 ,0x00000000 ,/* MX6_IOM_GRP_DDRPKE */ + +0x020e04ac ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_0 */ +0x020e04b0 ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_1 */ + +0x020e0464 ,0x00000028 ,/* MX6_IOM_DRAM_CAS */ +0x020e0490 ,0x00000028 ,/* MX6_IOM_DRAM_RAS */ +0x020e074c ,0x00000028 ,/* MX6_IOM_GRP_ADDDS */ + +0x020e0494 ,0x00000028 ,/* MX6_IOM_DRAM_RESET */ +0x020e04a0 ,0x00000000 ,/* MX6_IOM_DRAM_SDBA2 */ +0x020e04b4 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT0 */ +0x020e04b8 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT1 */ +0x020e076c ,0x00000028 ,/* MX6_IOM_GRP_CTLDS */ + +0x020e0750 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE_CTL */ +0x020e04bc ,0x00000028 ,/* MX6_IOM_DRAM_SDQS0 */ +0x020e04c0 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS1 */ +0x020e04c4 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS2 */ +0x020e04c8 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS3 */ + +0x020e0760 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE */ +0x020e0764 ,0x00000028 ,/* MX6_IOM_GRP_B0DS */ +0x020e0770 ,0x00000028 ,/* MX6_IOM_GRP_B1DS */ +0x020e0778 ,0x00000028 ,/* MX6_IOM_GRP_B2DS */ +0x020e077c ,0x00000028 ,/* MX6_IOM_GRP_B3DS */ + +0x020e0470 ,0x00000028 ,/* MX6_IOM_DRAM_DQM0 */ +0x020e0474 ,0x00000028 ,/* MX6_IOM_DRAM_DQM1 */ +0x020e0478 ,0x00000028 ,/* MX6_IOM_DRAM_DQM2 */ +0x020e047c ,0x00000028 ,/* MX6_IOM_DRAM_DQM3 */ + +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ + +0x021b0800 ,0xA1390003 ,/* DDR_PHY_P0_MPZQHWCTRL */ + +0x021b080c ,0x0042004b ,/* MMDC1_MPWLDECTRL0 */ +0x021b0810 ,0x0038003c ,/* MMDC1_MPWLDECTRL1 */ + +0x021b083c ,0x42340230 ,/* MPDGCTRL0 PHY0 */ +0x021b0840 ,0x0228022c ,/* MPDGCTRL1 PHY0 */ + +0x021b0848 ,0x42444646 ,/* MPRDDLCTL PHY0 */ + +0x021b0850 ,0x38382e2e ,/* MPWRDLCTL PHY0 */ + +0x021b081c ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY0DL3 */ +0x021b0820 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY1DL3 */ +0x021b0824 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY2DL3 */ +0x021b0828 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY3DL3 */ + +0x021b08b8 ,0x00000800 ,/* DDR_PHY_P0_MPMUR0 */ + +0x021b0004 ,0x0002002D ,/* MMDC0_MDPDC */ +0x021b0008 ,0x00333040 ,/* MMDC0_MDOTC */ +0x021b000c ,0x3F4352F3 ,/* MMDC0_MDCFG0 */ +0x021b0010 ,0xB66D8B63 ,/* MMDC0_MDCFG1 */ +0x021b0014 ,0x01FF00DB ,/* MMDC0_MDCFG2 */ + +0x021b0018 ,0x00011740 ,/* MMDC0_MDMISC */ +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ +0x021b002c ,0x000026D2 ,/* MMDC0_MDRWD */ +0x021b0030 ,0x00431023 ,/* MMDC0_MDOR */ +0x021b0040 ,0x00000017 ,/* Chan0 CS0_END */ +0x021b0000 ,0x83190000 ,/* MMDC0_MDCTL */ + +0x021b001c ,0x02008032 ,/* MMDC0_MDSCR MR2 write, CS0 */ +0x021b001c ,0x00008033 ,/* MMDC0_MDSCR, MR3 write, CS0 */ +0x021b001c ,0x00048031 ,/* MMDC0_MDSCR, MR1 write, CS0 */ +0x021b001c ,0x15208030 ,/* MMDC0_MDSCR, MR0write, CS0 */ +0x021b001c ,0x04008040 ,/* MMDC0_MDSCR */ board/bticino/mamoj/spl.c line 112
Quoted 10 lines
board/bticino/mamoj/spl.c new file +10
-0+ +0x021b0020 ,0x00007800 ,/* MMDC0_MDREF */ + +0x021b0818 ,0x00022227 ,/* DDR_PHY_P0_MPODTCTRL */ + +0x021b0004 ,0x0002556D ,/* MMDC0_MDPDC */ +0x021b0404 ,0x00011006 ,/* MMDC0_MAPSR ADOPT */ + 0x021b001c, 0x00000000, /* MMDC0_MDSCR */ +}; +Sorry to have not raised this before. I saw this the first time, but I did not understand. I tried to find a reason for it, but still I had no answer.
Quoted 7 lines
This is a DL, and DDR support is full integrated in U-Boot, including dynamic calibration if desired. What is the reason to dump the DCD table into code and push it with
ddr_init, instead of setting structures for chip, gpr and calibration as most of boards are doing ? If you dump the table, you could this in the .cfg file where the DCD table belongs to, of course adding entries for DDR initialisation. I do not see after long thoughts any reason to go in this way.
Quoted 3 lines
Like initializing ddr config and calibration using
mx6sdl_dram_iocfgandmx6_dram_cfg? yes I usually does the same instead of hot codding hex values.
Yes, this is what I mean.
Quoted 1 line
It's my bad will update accoodingly and send.
Thanks - the rest of patchset is straightforward, and I will apply then the next version.
Regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 1/7 i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Quoted 498 lines · Stefano Babic
Quoted 493 lines · Jagan Teki
Quoted 484 lines · Stefano Babic
Hi Jagan,
Quoted 466 lines · Jagan Teki
Add initial support for i.MX6DL BTicino Mamoj board.
Mamoh board added:
- SPL
-SPL_DM
-SPL_OF_CONTROL
- DM for U-Boot proper
-OF_CONTROLfor U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDPSigned-off-by Simone CIANNI <[email protected]>Signed-off-by Raffaele RECALCATI <[email protected]>Signed-off-by Jagan Teki <[email protected]>--- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6dl-mamoj-u-boot.dtsi | 15 ++++ arch/arm/dts/imx6dl-mamoj.dts | 84 +++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 29 +++++++ board/bticino/mamoj/Kconfig | 12 +++ board/bticino/mamoj/MAINTAINERS | 10 +++ board/bticino/mamoj/Makefile | 8 ++ board/bticino/mamoj/README | 60 +++++++++++++ board/bticino/mamoj/mamoj.c | 27 ++++++ board/bticino/mamoj/spl.c | 154 ++++++++++++++++++++++++++++++++++ configs/imx6dl_mamoj_defconfig | 39 +++++++++ include/configs/imx6dl-mamoj.h | 88 +++++++++++++++++++ 12 files changed, 527 insertions(+) create mode 100644 arch/arm/dts/imx6dl-mamoj-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-mamoj.dts create mode 100644 board/bticino/mamoj/Kconfig create mode 100644 board/bticino/mamoj/MAINTAINERS create mode 100644 board/bticino/mamoj/Makefile create mode 100644 board/bticino/mamoj/README create mode 100644 board/bticino/mamoj/mamoj.c create mode 100644 board/bticino/mamoj/spl.c create mode 100644 configs/imx6dl_mamoj_defconfig create mode 100644 include/configs/imx6dl-mamoj.harch/arm/dts/Makefile +1
-0@@ -398,6 +398,7 @@ dtb-$(CONFIG_MX6QDL) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-mamoj.dtb \ imx6q-cm-fx6.dtb \ imx6q-icore.dtb \ imx6q-icore-mipi.dtb \arch/arm/dts/imx6dl-mamoj-u-boot.dtsi new file +15
-0@@ -0,0 +1,15 @@ +/* + * Copyright (C) 2018 Jagan Teki <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "imx6qdl-u-boot.dtsi" + +&usdhc3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +};arch/arm/dts/imx6dl-mamoj.dts new file +84
-0@@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BTicino + * Copyright (C) 2018 Amarula Solutions B.V. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl.dtsi" + +/ { + model = "BTicino i.MX6DL Mamoj board"; + compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "mii"; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0 + MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b1 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0 + MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +};arch/arm/mach-imx/mx6/Kconfig +29
-0@@ -225,6 +225,34 @@ config TARGET_MX6MEMCAL config TARGET_MX6QARM2 bool "mx6qarm2" +config TARGET_MX6DL_MAMOJ + bool "Support BTicino Mamoj" + select MX6QDL + select OF_CONTROL + select PINCTRL + select DM + select DM_ETH + select DM_GPIO + select DM_MMC + select DM_THERMAL + select SPL + select SUPPORT_SPL + select SPL_DM if SPL + select SPL_OF_LIBFDT if SPL + select SPL_OF_CONTROL if SPL + select SPL_PINCTRL if SPL + select SPL_SEPARATE_BSS if SPL + select SPL_GPIO_SUPPORT if SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBDISK_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL + select SPL_MMC_SUPPORT if SPL + select SPL_SERIAL_SUPPORT if SPL + select SPL_USB_HOST_SUPPORT if SPL + select SPL_USB_GADGET_SUPPORT if SPL + select SPL_USB_SDP_SUPPORT if SPL + select SPL_WATCHDOG_SUPPORT if SPL + config TARGET_MX6Q_ENGICAM bool "Support Engicam i.Core(RQS)" select BOARD_LATE_INIT@@ -458,6 +486,7 @@ source "board/bachmann/ot1200/Kconfig" source "board/barco/platinum/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" +source "board/bticino/mamoj/Kconfig" source "board/ccv/xpress/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig"board/bticino/mamoj/Kconfig new file +12
-0@@ -0,0 +1,12 @@ +if TARGET_MX6DL_MAMOJ + +config SYS_BOARD + default "mamoj" + +config SYS_VENDOR + default "bticino" + +config SYS_CONFIG_NAME + default "imx6dl-mamoj" + +endifboard/bticino/mamoj/MAINTAINERS new file +10
-0@@ -0,0 +1,10 @@ +MX6DL_MAMOJ BOARD +M: Jagan Teki <[email protected]> +M: Raffaele RECALCATI <[email protected]> +M: Simone CIANNI <[email protected]> +S: Maintained +F: board/bticino/mamoj +F: include/configs/imx6dl-mamoj.h +F: configs/imx6dl_mamoj_defconfig +F: arch/arm/dts/imx6dl-mamoj.dts +F: arch/arm/dts/imx6dl-mamoj-u-boot.dtsiboard/bticino/mamoj/Makefile new file +8
-0@@ -0,0 +1,8 @@ +# Copyright (C) 2018 BTicino +# Copyright (C) 2017 Amarula Solutions B.V. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mamoj.o +obj-$(CONFIG_SPL_BUILD) += spl.oboard/bticino/mamoj/README new file +60
-0@@ -0,0 +1,60 @@ +BTicino Mamoj board: +=================== + +Build: + + $ make mrproper + $ make imx6dl_mamoj_defconfig + $ make + + This will generate the SPL image called SPL and the u-boot-dtb.img. + +The following methods can be used for booting Mamoj boards: + +1. USB SDP boot + +1. USB SDP boot: +--------------- + + - Build imx_usb_loader + + $ git clone git://github.com/boundarydevices/imx_usb_loader.git + $ cd imx_usb_loader + $ make + + - Build the BSP and copy SPL, u-boot-dtb.img in imx_usb_loader directory + + - Put the board in "Serial Download Mode" + + - Plug-in USB-to-Serial, Open minicom 1152008N1 and USB OTG cables to Host + + - Turn-on board + + - Identify VID/PID using lsusb + + Bus 001 Device 010: ID 15a2:0061 Freescale Semiconductor, Inc. i.MX 6Solo/6DualLite SystemOnChip in RecoveryMode + + - Update the conf files + + imx_usb.conf + 0x15a2:0x0061, mx6_usb_rom.conf, 0x0525:0xb4a4, mx6_usb_sdp_spl.conf + + mx6_usb_rom.conf + mx6_usb + hid,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + SPL:jump header2 + + mx6_usb_sdp_spl.conf + mx6_spl_sdp + hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000 + u-boot-dtb.img:jump header2 + + - Launch the loader + + $ ./imx_usb + + We can see U-Boot boot from USB SDP on minicom + +-- +Jagan Teki <[email protected]> +03/12/18board/bticino/mamoj/mamoj.c new file +27
-0@@ -0,0 +1,27 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +int board_init (void ) +{ +/* Address of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +return 0 ; +} + +int dram_init (void ) +{ + gd->ram_size =imx_ddr_size (); + +return 0 ; +}board/bticino/mamoj/spl.c new file +102
-0@@ -0,0 +1,154 @@ +/* +* Copyright (C) 2018 Simone CIANNI <[email protected]> +* Copyright (C) 2018 Raffaele RECALCATI <[email protected]> +* Copyright (C) 2018 Jagan Teki <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <spl.h> + +#include <asm/io.h> +#include <linux/sizes.h> + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart3_pads[] = { +IOMUX_PADS (PAD_EIM_D24__UART3_TX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +IOMUX_PADS (PAD_EIM_D25__UART3_RX_DATA |MUX_PAD_CTRL (UART_PAD_CTRL )), +}; + +static int mx6dl_dcd_table[] = { +0x020e0774 ,0x000C0000 ,/* MX6_IOM_GRP_DDR_TYPE */ +0x020e0754 ,0x00000000 ,/* MX6_IOM_GRP_DDRPKE */ + +0x020e04ac ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_0 */ +0x020e04b0 ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_1 */ + +0x020e0464 ,0x00000028 ,/* MX6_IOM_DRAM_CAS */ +0x020e0490 ,0x00000028 ,/* MX6_IOM_DRAM_RAS */ +0x020e074c ,0x00000028 ,/* MX6_IOM_GRP_ADDDS */ + +0x020e0494 ,0x00000028 ,/* MX6_IOM_DRAM_RESET */ +0x020e04a0 ,0x00000000 ,/* MX6_IOM_DRAM_SDBA2 */ +0x020e04b4 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT0 */ +0x020e04b8 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT1 */ +0x020e076c ,0x00000028 ,/* MX6_IOM_GRP_CTLDS */ + +0x020e0750 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE_CTL */ +0x020e04bc ,0x00000028 ,/* MX6_IOM_DRAM_SDQS0 */ +0x020e04c0 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS1 */ +0x020e04c4 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS2 */ +0x020e04c8 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS3 */ + +0x020e0760 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE */ +0x020e0764 ,0x00000028 ,/* MX6_IOM_GRP_B0DS */ +0x020e0770 ,0x00000028 ,/* MX6_IOM_GRP_B1DS */ +0x020e0778 ,0x00000028 ,/* MX6_IOM_GRP_B2DS */ +0x020e077c ,0x00000028 ,/* MX6_IOM_GRP_B3DS */ + +0x020e0470 ,0x00000028 ,/* MX6_IOM_DRAM_DQM0 */ +0x020e0474 ,0x00000028 ,/* MX6_IOM_DRAM_DQM1 */ +0x020e0478 ,0x00000028 ,/* MX6_IOM_DRAM_DQM2 */ +0x020e047c ,0x00000028 ,/* MX6_IOM_DRAM_DQM3 */ + +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ + +0x021b0800 ,0xA1390003 ,/* DDR_PHY_P0_MPZQHWCTRL */ + +0x021b080c ,0x0042004b ,/* MMDC1_MPWLDECTRL0 */ +0x021b0810 ,0x0038003c ,/* MMDC1_MPWLDECTRL1 */ + +0x021b083c ,0x42340230 ,/* MPDGCTRL0 PHY0 */ +0x021b0840 ,0x0228022c ,/* MPDGCTRL1 PHY0 */ + +0x021b0848 ,0x42444646 ,/* MPRDDLCTL PHY0 */ + +0x021b0850 ,0x38382e2e ,/* MPWRDLCTL PHY0 */ + +0x021b081c ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY0DL3 */ +0x021b0820 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY1DL3 */ +0x021b0824 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY2DL3 */ +0x021b0828 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY3DL3 */ + +0x021b08b8 ,0x00000800 ,/* DDR_PHY_P0_MPMUR0 */ + +0x021b0004 ,0x0002002D ,/* MMDC0_MDPDC */ +0x021b0008 ,0x00333040 ,/* MMDC0_MDOTC */ +0x021b000c ,0x3F4352F3 ,/* MMDC0_MDCFG0 */ +0x021b0010 ,0xB66D8B63 ,/* MMDC0_MDCFG1 */ +0x021b0014 ,0x01FF00DB ,/* MMDC0_MDCFG2 */ + +0x021b0018 ,0x00011740 ,/* MMDC0_MDMISC */ +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ +0x021b002c ,0x000026D2 ,/* MMDC0_MDRWD */ +0x021b0030 ,0x00431023 ,/* MMDC0_MDOR */ +0x021b0040 ,0x00000017 ,/* Chan0 CS0_END */ +0x021b0000 ,0x83190000 ,/* MMDC0_MDCTL */ + +0x021b001c ,0x02008032 ,/* MMDC0_MDSCR MR2 write, CS0 */ +0x021b001c ,0x00008033 ,/* MMDC0_MDSCR, MR3 write, CS0 */ +0x021b001c ,0x00048031 ,/* MMDC0_MDSCR, MR1 write, CS0 */ +0x021b001c ,0x15208030 ,/* MMDC0_MDSCR, MR0write, CS0 */ +0x021b001c ,0x04008040 ,/* MMDC0_MDSCR */ board/bticino/mamoj/spl.c line 112
Quoted 10 lines
board/bticino/mamoj/spl.c new file +10
-0+ +0x021b0020 ,0x00007800 ,/* MMDC0_MDREF */ + +0x021b0818 ,0x00022227 ,/* DDR_PHY_P0_MPODTCTRL */ + +0x021b0004 ,0x0002556D ,/* MMDC0_MDPDC */ +0x021b0404 ,0x00011006 ,/* MMDC0_MAPSR ADOPT */ + 0x021b001c, 0x00000000, /* MMDC0_MDSCR */ +}; +Sorry to have not raised this before. I saw this the first time, but I did not understand. I tried to find a reason for it, but still I had no answer.
Quoted 7 lines
This is a DL, and DDR support is full integrated in U-Boot, including dynamic calibration if desired. What is the reason to dump the DCD table into code and push it with
ddr_init, instead of setting structures for chip, gpr and calibration as most of boards are doing ? If you dump the table, you could this in the .cfg file where the DCD table belongs to, of course adding entries for DDR initialisation. I do not see after long thoughts any reason to go in this way.Quoted 3 lines
Like initializing ddr config and calibration using
mx6sdl_dram_iocfgandmx6_dram_cfg? yes I usually does the same instead of hot codding hex values.
Quoted 6 lines
Yes, this is what I mean.
Quoted 1 line
It's my bad will update accoodingly and send.
Thanks - the rest of patchset is straightforward, and I will apply then the next version.
OK, and also this the dt changes on this have dependecy with these patches[1]. please make sure to apply these first.
[1] https://patchwork.ozlabs.org/cover/897156/
Jagan.
Signature · 4 lines
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.
PATCH v2 1/7 i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
In reply to Stefano BabicHi Stefano,
Quoted 4 lines · Stefano Babic
Quoted 3 lines · Jagan Teki
Quoted 2 lines · Stefano Babic
Hi Jagan,
[snip]
Quoted 97 lines
Quoted 97 lines
Quoted 96 lines
Quoted 74 lines
board/bticino/mamoj/spl.c new file +74
-0+ +static int mx6dl_dcd_table[] = { +0x020e0774 ,0x000C0000 ,/* MX6_IOM_GRP_DDR_TYPE */ +0x020e0754 ,0x00000000 ,/* MX6_IOM_GRP_DDRPKE */ + +0x020e04ac ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_0 */ +0x020e04b0 ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_1 */ + +0x020e0464 ,0x00000028 ,/* MX6_IOM_DRAM_CAS */ +0x020e0490 ,0x00000028 ,/* MX6_IOM_DRAM_RAS */ +0x020e074c ,0x00000028 ,/* MX6_IOM_GRP_ADDDS */ + +0x020e0494 ,0x00000028 ,/* MX6_IOM_DRAM_RESET */ +0x020e04a0 ,0x00000000 ,/* MX6_IOM_DRAM_SDBA2 */ +0x020e04b4 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT0 */ +0x020e04b8 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT1 */ +0x020e076c ,0x00000028 ,/* MX6_IOM_GRP_CTLDS */ + +0x020e0750 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE_CTL */ +0x020e04bc ,0x00000028 ,/* MX6_IOM_DRAM_SDQS0 */ +0x020e04c0 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS1 */ +0x020e04c4 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS2 */ +0x020e04c8 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS3 */ + +0x020e0760 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE */ +0x020e0764 ,0x00000028 ,/* MX6_IOM_GRP_B0DS */ +0x020e0770 ,0x00000028 ,/* MX6_IOM_GRP_B1DS */ +0x020e0778 ,0x00000028 ,/* MX6_IOM_GRP_B2DS */ +0x020e077c ,0x00000028 ,/* MX6_IOM_GRP_B3DS */ + +0x020e0470 ,0x00000028 ,/* MX6_IOM_DRAM_DQM0 */ +0x020e0474 ,0x00000028 ,/* MX6_IOM_DRAM_DQM1 */ +0x020e0478 ,0x00000028 ,/* MX6_IOM_DRAM_DQM2 */ +0x020e047c ,0x00000028 ,/* MX6_IOM_DRAM_DQM3 */ + +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ + +0x021b0800 ,0xA1390003 ,/* DDR_PHY_P0_MPZQHWCTRL */ + +0x021b080c ,0x0042004b ,/* MMDC1_MPWLDECTRL0 */ +0x021b0810 ,0x0038003c ,/* MMDC1_MPWLDECTRL1 */ + +0x021b083c ,0x42340230 ,/* MPDGCTRL0 PHY0 */ +0x021b0840 ,0x0228022c ,/* MPDGCTRL1 PHY0 */ + +0x021b0848 ,0x42444646 ,/* MPRDDLCTL PHY0 */ + +0x021b0850 ,0x38382e2e ,/* MPWRDLCTL PHY0 */ + +0x021b081c ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY0DL3 */ +0x021b0820 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY1DL3 */ +0x021b0824 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY2DL3 */ +0x021b0828 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY3DL3 */ + +0x021b08b8 ,0x00000800 ,/* DDR_PHY_P0_MPMUR0 */ + +0x021b0004 ,0x0002002D ,/* MMDC0_MDPDC */ +0x021b0008 ,0x00333040 ,/* MMDC0_MDOTC */ +0x021b000c ,0x3F4352F3 ,/* MMDC0_MDCFG0 */ +0x021b0010 ,0xB66D8B63 ,/* MMDC0_MDCFG1 */ +0x021b0014 ,0x01FF00DB ,/* MMDC0_MDCFG2 */ + +0x021b0018 ,0x00011740 ,/* MMDC0_MDMISC */ +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ +0x021b002c ,0x000026D2 ,/* MMDC0_MDRWD */ +0x021b0030 ,0x00431023 ,/* MMDC0_MDOR */ +0x021b0040 ,0x00000017 ,/* Chan0 CS0_END */ +0x021b0000 ,0x83190000 ,/* MMDC0_MDCTL */ + +0x021b001c ,0x02008032 ,/* MMDC0_MDSCR MR2 write, CS0 */ +0x021b001c ,0x00008033 ,/* MMDC0_MDSCR, MR3 write, CS0 */ +0x021b001c ,0x00048031 ,/* MMDC0_MDSCR, MR1 write, CS0 */ +0x021b001c ,0x15208030 ,/* MMDC0_MDSCR, MR0write, CS0 */ +0x021b001c ,0x04008040 ,/* MMDC0_MDSCR */ board/bticino/mamoj/spl.c line 112
Quoted 10 lines
board/bticino/mamoj/spl.c new file +10
-0+ +0x021b0020 ,0x00007800 ,/* MMDC0_MDREF */ + +0x021b0818 ,0x00022227 ,/* DDR_PHY_P0_MPODTCTRL */ + +0x021b0004 ,0x0002556D ,/* MMDC0_MDPDC */ +0x021b0404 ,0x00011006 ,/* MMDC0_MAPSR ADOPT */ + 0x021b001c, 0x00000000, /* MMDC0_MDSCR */ +}; +Sorry to have not raised this before. I saw this the first time, but I did not understand. I tried to find a reason for it, but still I had no answer.
This is a DL, and DDR support is full integrated in U-Boot, including dynamic calibration if desired. What is the reason to dump the DCD table into code and push it with
ddr_init, instead of setting structures for chip, gpr and calibration as most of boards are doing ? If you dump the table, you could this in the .cfg file where the DCD table belongs to, of course adding entries for DDR initialisation. I do not see after long thoughts any reason to go in this way.
Quoted 5 lines
Quoted 3 lines
Like initializing ddr config and calibration using
mx6sdl_dram_iocfgandmx6_dram_cfg? yes I usually does the same instead of hot codding hex values.Yes, this is what I mean.
ddr calibration here has reinitialized few of same registers multiple times with a sequence, using mx6_dram_cfg I can't achieve the same. I need to dig further on to this for proper working register values meanwhile can it be possible to apply this sequence as of now? so-that I will change to ddr code in coming release.
Jagan.
PATCH v2 1/7 i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Quoted 107 lines · Jagan Teki
Hi Stefano,
Quoted 4 lines · Stefano Babic
Quoted 3 lines · Jagan Teki
Quoted 2 lines · Stefano Babic
Hi Jagan,
[snip]
Quoted 97 lines
Quoted 97 lines
Quoted 96 lines
Quoted 74 lines
board/bticino/mamoj/spl.c new file +74
-0+ +static int mx6dl_dcd_table[] = { +0x020e0774 ,0x000C0000 ,/* MX6_IOM_GRP_DDR_TYPE */ +0x020e0754 ,0x00000000 ,/* MX6_IOM_GRP_DDRPKE */ + +0x020e04ac ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_0 */ +0x020e04b0 ,0x00000028 ,/* MX6_IOM_DRAM_SDCLK_1 */ + +0x020e0464 ,0x00000028 ,/* MX6_IOM_DRAM_CAS */ +0x020e0490 ,0x00000028 ,/* MX6_IOM_DRAM_RAS */ +0x020e074c ,0x00000028 ,/* MX6_IOM_GRP_ADDDS */ + +0x020e0494 ,0x00000028 ,/* MX6_IOM_DRAM_RESET */ +0x020e04a0 ,0x00000000 ,/* MX6_IOM_DRAM_SDBA2 */ +0x020e04b4 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT0 */ +0x020e04b8 ,0x00000028 ,/* MX6_IOM_DRAM_SDODT1 */ +0x020e076c ,0x00000028 ,/* MX6_IOM_GRP_CTLDS */ + +0x020e0750 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE_CTL */ +0x020e04bc ,0x00000028 ,/* MX6_IOM_DRAM_SDQS0 */ +0x020e04c0 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS1 */ +0x020e04c4 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS2 */ +0x020e04c8 ,0x00000028 ,/* MX6_IOM_DRAM_SDQS3 */ + +0x020e0760 ,0x00020000 ,/* MX6_IOM_GRP_DDRMODE */ +0x020e0764 ,0x00000028 ,/* MX6_IOM_GRP_B0DS */ +0x020e0770 ,0x00000028 ,/* MX6_IOM_GRP_B1DS */ +0x020e0778 ,0x00000028 ,/* MX6_IOM_GRP_B2DS */ +0x020e077c ,0x00000028 ,/* MX6_IOM_GRP_B3DS */ + +0x020e0470 ,0x00000028 ,/* MX6_IOM_DRAM_DQM0 */ +0x020e0474 ,0x00000028 ,/* MX6_IOM_DRAM_DQM1 */ +0x020e0478 ,0x00000028 ,/* MX6_IOM_DRAM_DQM2 */ +0x020e047c ,0x00000028 ,/* MX6_IOM_DRAM_DQM3 */ + +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ + +0x021b0800 ,0xA1390003 ,/* DDR_PHY_P0_MPZQHWCTRL */ + +0x021b080c ,0x0042004b ,/* MMDC1_MPWLDECTRL0 */ +0x021b0810 ,0x0038003c ,/* MMDC1_MPWLDECTRL1 */ + +0x021b083c ,0x42340230 ,/* MPDGCTRL0 PHY0 */ +0x021b0840 ,0x0228022c ,/* MPDGCTRL1 PHY0 */ + +0x021b0848 ,0x42444646 ,/* MPRDDLCTL PHY0 */ + +0x021b0850 ,0x38382e2e ,/* MPWRDLCTL PHY0 */ + +0x021b081c ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY0DL3 */ +0x021b0820 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY1DL3 */ +0x021b0824 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY2DL3 */ +0x021b0828 ,0x33333333 ,/* DDR_PHY_P0_MPREDQBY3DL3 */ + +0x021b08b8 ,0x00000800 ,/* DDR_PHY_P0_MPMUR0 */ + +0x021b0004 ,0x0002002D ,/* MMDC0_MDPDC */ +0x021b0008 ,0x00333040 ,/* MMDC0_MDOTC */ +0x021b000c ,0x3F4352F3 ,/* MMDC0_MDCFG0 */ +0x021b0010 ,0xB66D8B63 ,/* MMDC0_MDCFG1 */ +0x021b0014 ,0x01FF00DB ,/* MMDC0_MDCFG2 */ + +0x021b0018 ,0x00011740 ,/* MMDC0_MDMISC */ +0x021b001c ,0x00008000 ,/* MMDC0_MDSCR */ +0x021b002c ,0x000026D2 ,/* MMDC0_MDRWD */ +0x021b0030 ,0x00431023 ,/* MMDC0_MDOR */ +0x021b0040 ,0x00000017 ,/* Chan0 CS0_END */ +0x021b0000 ,0x83190000 ,/* MMDC0_MDCTL */ + +0x021b001c ,0x02008032 ,/* MMDC0_MDSCR MR2 write, CS0 */ +0x021b001c ,0x00008033 ,/* MMDC0_MDSCR, MR3 write, CS0 */ +0x021b001c ,0x00048031 ,/* MMDC0_MDSCR, MR1 write, CS0 */ +0x021b001c ,0x15208030 ,/* MMDC0_MDSCR, MR0write, CS0 */ +0x021b001c ,0x04008040 ,/* MMDC0_MDSCR */ board/bticino/mamoj/spl.c line 112
Quoted 10 lines
board/bticino/mamoj/spl.c new file +10
-0+ +0x021b0020 ,0x00007800 ,/* MMDC0_MDREF */ + +0x021b0818 ,0x00022227 ,/* DDR_PHY_P0_MPODTCTRL */ + +0x021b0004 ,0x0002556D ,/* MMDC0_MDPDC */ +0x021b0404 ,0x00011006 ,/* MMDC0_MAPSR ADOPT */ + 0x021b001c, 0x00000000, /* MMDC0_MDSCR */ +}; +Sorry to have not raised this before. I saw this the first time, but I did not understand. I tried to find a reason for it, but still I had no answer.
This is a DL, and DDR support is full integrated in U-Boot, including dynamic calibration if desired. What is the reason to dump the DCD table into code and push it with
ddr_init, instead of setting structures for chip, gpr and calibration as most of boards are doing ? If you dump the table, you could this in the .cfg file where the DCD table belongs to, of course adding entries for DDR initialisation. I do not see after long thoughts any reason to go in this way.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Like initializing ddr config and calibration using
mx6sdl_dram_iocfgandmx6_dram_cfg? yes I usually does the same instead of hot codding hex values.Yes, this is what I mean.
ddr calibration here has reinitialized few of same registers multiple times with a sequence, using
mx6_dram_cfgI can't achieve the same.
Do you mean dynamic calibration CONFIG_MX6_DDRCAL ? If this is the case, you can still use the static values passing the parameters you got from ddr_stress.
Quoted 3 lines
I
need to dig further on to this for proper working register values meanwhile can it be possible to apply this sequence as of now?
I do not think this is a good idea - I really prefer to get in the final solution.
Thanks,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 2/7 i.MX6DL: mamoj: Add I2C support
In reply to Jagan Tekii.MX6DL Mamoj has i2c3 and i2c4 buses, add support through DM_I2C with dt definition.
i2c log:
=======
=> i2c bus
Bus 2: i2c at 021a8000 Bus 3: i2c at 021f8000
=> i2c dev 2
Setting bus to 2
=> i2c speed 400000
Setting bus speed to 400000 Hz
=> i2c probe
Valid chip addresses: 20 51 53
=> i2c md 53 0xff
00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
=> i2c md 51 0xff
00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53 .. at P.CFRB......S
=> i2c dev 3
Setting bus to 3
=> i2c speed 100000
Setting bus speed to 100000 Hz
=> i2c probe
Valid chip addresses: 08 40 48 4B
=> i2c md 08 0xff
00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
--- arch/arm/dts/imx6dl-mamoj.dts | 28 ++++++++++++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 1 + configs/imx6dl_mamoj_defconfig | 2 ++ 3 files changed, 31 insertions(+)
arch/arm/dts/imx6dl-mamoj.dts +28 -0
@@ -21,6 +21,20 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>;
@@ -60,6 +74,20 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
arch/arm/mach-imx/mx6/Kconfig +1 -0
@@ -233,6 +233,7 @@ config TARGET_MX6DL_MAMOJ select DM select DM_ETH select DM_GPIO + select DM_I2C select DM_MMC select DM_THERMAL select SPL
configs/imx6dl_mamoj_defconfig +2 -0
@@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="=> " CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y
@@ -37,3 +38,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_IMX_THERMAL=y +CONFIG_SYS_I2C_MXC=y
Signature · 1 line
2.14.3
PATCH v2 2/7 i.MX6DL: mamoj: Add I2C support
Quoted 108 lines · Jagan Teki
i.MX6DL Mamoj has i2c3 and i2c4 buses, add support through
DM_I2Cwith dt definition.i2c log:
=======
=> i2c busBus 2: i2c at 021a8000 Bus 3: i2c at 021f8000=> i2c dev 2
Setting bus to 2
=> i2c speed 400000
Setting bus speed to 400000 Hz
=> i2c probe
Valid chip addresses: 20 51 53
=> i2c md 530xff
00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
=> i2c md 510xff
00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53 .. atP.CFRB......S
=> i2c dev 3
Setting bus to 3
=> i2c speed 100000
Setting bus speed to 100000 Hz
=> i2c probe
Valid chip addresses: 08 40 48 4B
=> i2c md 080xff
00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................Signed-off-by Jagan Teki <[email protected]>Signed-off-by Simone CIANNI <[email protected]>Signed-off-by Raffaele RECALCATI <[email protected]>--- arch/arm/dts/imx6dl-mamoj.dts | 28 ++++++++++++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 1 + configs/imx6dl_mamoj_defconfig | 2 ++ 3 files changed, 31 insertions(+)arch/arm/dts/imx6dl-mamoj.dts +28
-0@@ -21,6 +21,20 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>;@@ -60,6 +74,20 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1arch/arm/mach-imx/mx6/Kconfig +1
-0@@ -233,6 +233,7 @@ config TARGET_MX6DL_MAMOJ select DM select DM_ETH select DM_GPIO + select DM_I2C select DM_MMC select DM_THERMAL select SPLconfigs/imx6dl_mamoj_defconfig +1
-0@@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="=> " CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y
configs/imx6dl_mamoj_defconfig CONFIG_USB_GADGET_VENDOR_NUM=0x0525 · line 41
Quoted 4 lines
configs/imx6dl_mamoj_defconfig +1
-0@@ -37,3 +38,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_IMX_THERMAL=y +CONFIG_SYS_I2C_MXC=y
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 3/7 i.MX6DL: mamoj: Add PFUZE100 support
In reply to Jagan TekiMX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support for it through DM_PMIC dt definition.
pmic log:
========
=> pmic list
| Name | Parent name | Parent uclass @ seq | pfuze100 at 08 | i2c at 021f8000 | i2c @ 3
=> pmic dev pfuze100 at 08
dev: 0 @ pfuze100 at 08
=> pmic dump
Dump pmic: pfuze100 at 08 registers
0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81 0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00 0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b 0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08 0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10 0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00
--- arch/arm/dts/imx6dl-mamoj.dts | 113 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 2 + configs/imx6dl_mamoj_defconfig | 1 + 3 files changed, 116 insertions(+)
arch/arm/dts/imx6dl-mamoj.dts +113 -0
@@ -33,6 +33,119 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; + + pmic: pfuze100 at 08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + /* CPU vdd_arm core */ + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* SOC vdd_soc */ + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* I/O power GEN_3V3 */ + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DDR memory */ + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DDR memory */ + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + /* not used */ + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + /* not used */ + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + /* PMIC vsnvs. EX boot mode */ + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* not used */ + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* not used */ + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* not used */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + /* 1v8 general power */ + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* 2v8 general power IMX6 */ + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* 3v3 Ethernet */ + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; &uart3 {
arch/arm/mach-imx/mx6/Kconfig +2 -0
@@ -235,6 +235,8 @@ config TARGET_MX6DL_MAMOJ select DM_GPIO select DM_I2C select DM_MMC + select DM_PMIC + select DM_PMIC_PFUZE100 select DM_THERMAL select SPL select SUPPORT_SPL
configs/imx6dl_mamoj_defconfig +1 -0
@@ -16,6 +16,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_PMIC=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y
Signature · 1 line
2.14.3
PATCH v2 3/7 i.MX6DL: mamoj: Add PFUZE100 support
Quoted 174 lines · Jagan Teki
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support for it through
DM_PMICdt definition.pmic log:
========
=> pmic list| Name | Parent name | Parent uclass @ seq | pfuze100 at 08 | i2c at 021f8000 | i2c @ 3=> pmic dev pfuze100 at 08
dev: 0 @ pfuze100 at 08
=> pmic dump
Dump pmic: pfuze100 at 08 registers
0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 810x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 000x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 080x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 000x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 100x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00Signed-off-by Jagan Teki <[email protected]>Signed-off-by Simone CIANNI <[email protected]>Signed-off-by Raffaele RECALCATI <[email protected]>--- arch/arm/dts/imx6dl-mamoj.dts | 113 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 2 + configs/imx6dl_mamoj_defconfig | 1 + 3 files changed, 116 insertions(+)arch/arm/dts/imx6dl-mamoj.dts +113
-0@@ -33,6 +33,119 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; + + pmic: pfuze100 at 08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + /* CPU vdd_arm core */ + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* SOC vdd_soc */ + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* I/O power GEN_3V3 */ + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DDR memory */ + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DDR memory */ + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + /* not used */ + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + /* not used */ + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + /* PMIC vsnvs. EX boot mode */ + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* not used */ + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* not used */ + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* not used */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + /* 1v8 general power */ + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* 2v8 general power IMX6 */ + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* 3v3 Ethernet */ + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; &uart3 {arch/arm/mach-imx/mx6/Kconfig +2
-0@@ -235,6 +235,8 @@ config TARGET_MX6DL_MAMOJ select DM_GPIO select DM_I2C select DM_MMC + select DM_PMIC + select DM_PMIC_PFUZE100 select DM_THERMAL select SPL select SUPPORT_SPLconfigs/imx6dl_mamoj_defconfig +0
-0
configs/imx6dl_mamoj_defconfig CONFIG_CMD_I2C=y · line 22
Quoted 7 lines
configs/imx6dl_mamoj_defconfig +1
-0@@ -16,6 +16,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_PMIC=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 4/7 configs: imx6dl_mamoj: Enable fastboot and ums
In reply to Jagan TekiEnable fastboot and ums for host to interact eMMC on Mamoj board.
--- configs/imx6dl_mamoj_defconfig | 6 ++++++ 1 file changed, 6 insertions(+)
configs/imx6dl_mamoj_defconfig +6 -0
@@ -8,6 +8,11 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mamoj" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y +CONFIG_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x12000000 +CONFIG_FASTBOOT_BUF_SIZE=0x10000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_SYS_PROMPT="=> " CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y
@@ -24,6 +29,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_MMC=y CONFIG_PHYLIB=y
Signature · 1 line
2.14.3
PATCH v2 5/7 configs: imx6dl-mamoj: Add DFU support
In reply to Jagan TekiAdd DFU support for BTicino Mamoj board and update the same steps in README.
--- board/bticino/mamoj/README | 37 +++++++++++++++++++++++++++++++++++++ configs/imx6dl_mamoj_defconfig | 2 ++ include/configs/imx6dl-mamoj.h | 4 +++- 3 files changed, 42 insertions(+), 1 deletion(-)
board/bticino/mamoj/README +37 -0
@@ -13,6 +13,8 @@ The following methods can be used for booting Mamoj boards: 1. USB SDP boot +2. eMMC boot (via DFU) + 1. USB SDP boot: ---------------
@@ -55,6 +57,41 @@ The following methods can be used for booting Mamoj boards: We can see U-Boot boot from USB SDP on minicom +2. eMMC boot via DFU: +-------------------- + + Once booted from USB SDP, program the eMMC as below(make sure to connect USB OTG) + + - Change eMMC partition config + + => mmc partconf 2 1 0 0 + + - Partition eMMC on host + + => ums 0 mmc 2 + + Host will able to detect the eMMC disk as UMS, partition the same. + + - Program SPL + + => setenv dfu_alt_info $dfu_alt_info_spl + => dfu 0 mmc 2 + + At Host + + # dfu-util -D SPL -a spl + + - Program u-boot-dtb.img + + => setenv dfu_alt_info $dfu_alt_info_uboot + => dfu 0 mmc 2 + + At Host + + # dfu-util -D u-boot-dtb.img -a u-boot + + Poweroff and Poweron the board and see U-Boot booting from eMMC. + -- Jagan Teki <[email protected]> 03/12/18
configs/imx6dl_mamoj_defconfig +2 -0
@@ -15,6 +15,7 @@ CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_SYS_PROMPT="=> " CONFIG_CRC32_VERIFY=y +CONFIG_CMD_DFU=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y
@@ -44,5 +45,6 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y +CONFIG_DFU_MMC=y CONFIG_IMX_THERMAL=y CONFIG_SYS_I2C_MXC=y
include/configs/imx6dl-mamoj.h +3 -1
@@ -15,7 +15,7 @@#include "mx6_common.h" /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) +#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)/* Total Size of Environment Sector */ #define CONFIG_ENV_SIZE SZ_128K
@@ -37,6 +37,8 @@"fdt_addr_r=0x13000000\0" \"kernel_addr_r=0x10008000\0" \"fdt_high=0xffffffff\0" \ +"dfu_alt_info_spl=spl raw 0x2 0x400\0" \ +"dfu_alt_info_uboot=u-boot raw 0x8a 0x11400\0" \BOOTENV #define BOOT_TARGET_DEVICES(func) \
Signature · 1 line
2.14.3
PATCH v2 6/7 configs: imx6dl-mamoj: Add Falcon mode support
In reply to Jagan TekiAdd Falcon mode support to boot Linux directly after SPL.
--- board/bticino/mamoj/README | 27 +++++++++++++++++++++++++++ board/bticino/mamoj/spl.c | 11 +++++++++++ configs/imx6dl_mamoj_defconfig | 1 + include/configs/imx6dl-mamoj.h | 12 ++++++++++++ 4 files changed, 51 insertions(+)
board/bticino/mamoj/README +27 -0
@@ -15,6 +15,8 @@ The following methods can be used for booting Mamoj boards: 2. eMMC boot (via DFU) +3. Falcon mode + 1. USB SDP boot: ---------------
@@ -92,6 +94,31 @@ The following methods can be used for booting Mamoj boards: Poweroff and Poweron the board and see U-Boot booting from eMMC. +3. Falcon mode: +-------------- + + - Skip 10M space and create dual partitions for eMMC, start sector is 20480 + + Partition Map for MMC device 2 -- Partition Type: DOS + + Part Start Sector Num Sectors UUID Type + 1 20480 131072 c52e78be-01 83 + 2 151552 7581696 c52e78be-02 83 + + - Write uImage + + => fatload mmc 2:1 $kernel_addr_r uImage + => mmc write $kernel_addr_r 0x1000 0x4000 + + - Write dtb and args + + => setenv bootargs console=ttymxc2,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw quiet + => fatload mmc 2:1 $fdt_addr_r imx6dl-mamoj.dtb + => spl export fdt $kernel_addr_r - $fdt_addr_r + => mmc write 0x13000000 0x800 0x800 + + Poweroff and Poweron the board and see Linux booting directly after SPL. + -- Jagan Teki <[email protected]> 03/12/18
board/bticino/mamoj/spl.c +11 -0
@@ -27,6 +27,17 @@ static iomux_v3_cfg_t const uart3_pads[] = { IOMUX_PADS(PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), }; +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot (void ) +{ +/* break into full u-boot on 'c' */ +if (serial_tstc () &&serial_getc () =='c' ) +return 1 ; + +return 0 ; +} +#endif +static int mx6dl_dcd_table[] = {0x020e0774 ,0x000C0000 ,/* MX6_IOM_GRP_DDR_TYPE */ 0x020e0754 ,0x00000000 ,/* MX6_IOM_GRP_DDRPKE */
configs/imx6dl_mamoj_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_MX6DL_MAMOJ=y +CONFIG_SPL_OS_BOOT=y # CONFIG_CMD_BMODE is not set CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mamoj" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
include/configs/imx6dl-mamoj.h +12 -0
@@ -64,6 +64,18 @@#define CONFIG_MXC_USB_FLAGS 0#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +/* Falcon */ +#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" +#define CONFIG_CMD_SPL +#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000 +#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) + +/* MMC support: args at 1MB kernel at 2MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800/* 1MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000/* 2MB */ +/* Miscellaneous configurable options */ #define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
Signature · 1 line
2.14.3
PATCH v2 7/7 configs: imx6dl-mamoj: Enable HAB
In reply to Jagan TekiEnable Secure boot(HAB) for BTicino Mamoj board.
--- configs/imx6dl_mamoj_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/imx6dl_mamoj_defconfig +1 -0
@@ -49,3 +49,4 @@ CONFIG_CI_UDC=y CONFIG_DFU_MMC=y CONFIG_IMX_THERMAL=y CONFIG_SYS_I2C_MXC=y +CONFIG_SECURE_BOOT=y
Signature · 1 line
2.14.3
v2 cover i.MX6DL: Add BTicino Mamoj board support
In reply to Jagan TekiStefano,
Quoted 6 lines · Jagan Teki
This series add support for BTicino i.MX6DL Mamoj board.
Changes for v2:
- UpdateKconfigchanges forCONFIG_FSL_ESDHC
- Add HAB support
Quoted 8 lines
Jagan Teki (7):
i.MX6: board: Add BTicino i.MX6DL Mamoj initial support i.MX6DL: mamoj: Add I2C support
i.MX6DL: mamoj: Add PFUZE100 support
configs:imx6dl_mamoj: Enable fastboot and ums
configs: imx6dl-mamoj: Add DFU support
configs: imx6dl-mamoj: Add Falcon mode support
configs: imx6dl-mamoj: Enable HAB
Let me know if you have further comments, if OK please apply.
Jagan.