ARM: dts: Fix cm2 and prm sizes for omap4
PATCH 1/1 ARM: dts: Fix cm2 and prm sizes for omap4
The size of these modules is 0x2000, not 0x3000. The extra 0x1000 after 0x2000 is for the interconnect target agent which is a separate device.
Fixes 7415b0b4c645 ("ARM: dts: omap4: add minimal l4 bus layout with
control module support")
Cc Tero Kristo <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
--- arch/arm/boot/dts/omap4.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/dts/omap4.dtsi +4 -4
@@ -163,10 +163,10 @@ cm2: cm2@8000 { compatible = "ti,omap4-cm2", "simple-bus"; - reg = <0x8000 0x3000>; + reg = <0x8000 0x2000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x8000 0x3000>; + ranges = <0 0x8000 0x2000>; cm2_clocks: clocks { #address-cells = <1>;
@@ -250,11 +250,11 @@ prm: prm@6000 { compatible = "ti,omap4-prm"; - reg = <0x6000 0x3000>; + reg = <0x6000 0x2000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x6000 0x3000>; + ranges = <0 0x6000 0x2000>; prm_clocks: clocks { #address-cells = <1>;
Signature · 1 line
2.17.0